PUNKT LAMP 150 The simplicity in design and quality in material has made the Punkt lamp the preferred downlight among architects. The design is dominated by the inner shade in mouth-blown glass, spreading the light in a pleasant and beautiful way. The 200 mm Punkt lamp can be equipped with an extra glass shade at the bottom. This glass shade reduceres the output ratio a bit, but sandblasted clear glass allows for excellent diffusion. All Punkt lamps are approved for recession in various types of ceilings. With a special waterproof cover, they can be used in bath rooms and outdoors in roofs and carports. Size: 150 mm diameter Oter Punkt lamps: 65, 90, 110, and 200 mm Finish: White or grey metallic with shade in opal-white glass Light sources for Punkt 150: LED CFL, ECG LED The 150 mm Punkt lamp is availabe with an exchangable LED, type Bridgelux ES. Bridgelux offers flexible LEDs in different colour temperatures and corresponding differences in colour rendering. We use the warm-white colour 2700 offering excellent colour rendering.
PUNKT LAMP 150 LED Luminaire specification: Aluminium Shade: Opal-white glass cylinder Mounting: To be recessed Cut-out: Ø132-134 mm in 6-15 mm plates Ø136-138 mm in15-35 mm plates Clearances: Horizontally: min 45 mm Height: min 121 mm from lower edge of ceiling Connection: 230 V, box with 5-pole terminal block Classification: IP20, class I Weight: 0.9 kg Options: 3 mm glass shade - specification below Ring for soft ceilings Lamp and driver specification: LED type: Bridgelux ES Total consumption: 14 W (500 ma) alt. 10 W (350 ma) Operationel life: min 50,000 hours at t a max 25 Colour temperature: 2700 Kelvin Colour rendering: min 90 Ra Glaring: max 13.3 UGR Angle of diffusion: 60 Output ratio: 88 per cent Driver: Helvar LED driver, 350-500 ma Option for dimmable driver OBS - switch dimming! We recommend max five units per switch See connection diagram and switch control info Operational life: min 50,000 hours Product codes Punkt Lamp 150 LED Item No. Lamp type Select colour, colour temperature, etc in the table below. 2826-10 W 350 ma 2813-14 W 500 ma To be combined with: Colour Colour temperature Dimmable driver 2 white w. glass 927 2700 K, 90 Ra empty no dimming 9 grey metallic w. glass V 1-10 V D Dali Example: 2813-2927V = Punkt Lamp 150, 14 W LED, 2700 K, white w. glass, dimmable1-10 V Options 20152 3 mm glass shade 2030-20 Ring for soft ceilings
PUNKTLAMPEN 150 CFL ECG Luminaire specification: Aluminium Shade: Opal-white glass cylinder Mounting: To be recessed Cut-out: Ø132-134 mm in 6-15 mm plates Ø136-138 mm in15-35 mm plates Clearances: Horizontally: min 45 mm Height: min 130 mm from lower edge of ceiling Connection: 230 V, box with 5-pole terminal block Classification: IP20, class I Weight: 0.9 kg Lamp specification: Type: 18 W TC-TEL, ECG, GX24q-2 4-pin Colour temperature: 2700 Kelvin Colour rendering: min 85 Ra Output ratio: 65 per cent Options: 3 mm glass shade - specification below Ring for soft ceilings Product codes Punkt Lamp 150 CFL ECG Item No. Lamp type Select colour, dimming, etc, in the table below. 2203-18 W TC-TEL, ECG To be combined with: Colour Dimmable driver 2 white w. glass empty no dimming 9 grey metallic w. glass V 1-10 V D Dali Example: 2203-2V = Punkt Lamp 150, 18 W, white w. glass, dimmable 1-10 V Options 20152 3 mm glass shade 2030-20 Ring for soft ceilings
GLAS SHADE FOR PUNKT LAMP 150 Product specification: Sandblasted glass Assembly: The glass shade is attached to the inner cylinder. For replacement of lamp, cylinder and shade are dismantled in one piece. Dimensions: Ø 90 mm, H 3 mm Light diffusion: 85 per cent
PUNKTLAMPEN 150 www.focus-lighting.dk www.foxdesign.se www.akb-lighting.no