wirerodsystems STRUCTURAL structural residential landscape coercial retail Sta-Lok Terminals Ltd are one of the world s leading manufacturers of stainless steel fittings for wire ropes, rods & fabricated Wire / Rod assemblies. Our products are manufactured to the highest standards, with a worldwide reputation for outstanding quality, reliability and value. With over 35 years experience within the industry, we can help you with any requirements you may have. Our expert team can help you select the best solution to suit your applications. With thousands of standard products available off the shelf we guarantee a next day delivery. Is your concept unique? Our custom manufacturing service can deliver one off components or complete solutions to meet your own design specifications. We can provide full product traceability and certification where needed Sta-Lok products continue to be used in some of the world s most innovative environments, structures & projects. Typical uses include: Fabric canopy support and tension systems Bridge suspensions Structural bracing Balustrades & Infill cables Banners Mast rigging Awning and fixture hangers Staircase membranes Shop fitting, and Trellis Look at our website to see examples of our products in use Call the experts today on...cable projects quicker and easier than ever... Sta-Lok offer a wide range of easy to install prefabricated cable assemblies. With over 35 years experience within the industry we can help you with any requirements you may have. Call the experts on
CABLE RAIL 4 Standard Assemblies Our most popular and cost effective cable option. Perfect for all residential and light coercial projects. Can be installed on wood or metal frames. Stainless QuickConnect-SS fittings make cable projects quicker and easier than ever. Our standard CableRail assemblies are available in 2 cable sizes (4 and 5) that are all sold in standard, precut lengths for easy ordering. The great thing is that you don't need to waste time taking precise railing measurements; just select assemblies that are longer than you need and trim any excess. Each assembly comes with a Threaded Terminal fitting pre-attached to one end and a field installed QuickConnect-SS fitting for the other end. Simply secure the Terminal to one end post, lace the free end of the cable through the remaining posts, slip on a QuickConnect-SS, or Push Fit Terminal, tension the wire, cut the excess and finish with decorative end caps. That's it. The new stainless QuickConnect-SS fitting is attached to the cable in the field without special tools. One-way jaws allow the cable to easily slide through the fitting in one direction but automatically grab and lock-on when the cable is released. Just slip it on, pull the cable tight and remove the excess. The cable is 1x19 construction, type 316 stainless steel for strength, durability and weather protection. Available in 4 and 5 diameters. The stainless Threaded Terminal fitting is fastened (swaged) to one end of the cable at the factory. Attach it to an end post using a special Washer-Nut and spin the nut to adjust final tension in the cable. a b c 5 Standard Assemblies Extra durable option for coercial as well as residential settings. Can be installed on wood or metal railing frames. Flat Washers, Washer-Nut and Coloured End Caps are all included with both 4 and 5 Standard Assemblies. Stainless End Caps are also available as an accessory item. it s so quick and... a. Stainless Protector Sleeves (wood posts only) For protecting corner and stairway transition posts from cable wear. 3210 6.35 OD x 22 long (fits 6.35 holes) b. Rubber Groets (optional) For adding a finishing detail to holes in tubular metal posts. 3213 11 OD flange, black (fits 6.35 holes) c. Stainless Beveled Washers For attaching end fittings on angled holes at stair end posts. 3792 19 OD x 10 ID (QuickConnect-SS ends) 3799 19 OD x 7 ID (Threaded Terminal ends) Stainless End Caps Decorative option for covering and finishing Threaded Terminal and QuickConnect-SS fittings. Available in 3 styles. 3372 Dome Style 3373 Crown Style 3374 Chamfer Style...easy Components that are made to last. All of our cables and swage fittings are manufactured from high quality type 316 stainless steel for weather-tough durability and lasting beauty.
WIRE ROPE SYSTEM Swage Tension Fork Ideal for uses where syetry is required. Designed with clean stylish lines and practical cable tensioning. For wire sizes 3 up to 26. Rigging Solutions for Imaginative and Creative Design Sta-Lok wire rope systems offer the ultimate in design and functionality for architectural rigging, providing an attractive, high quality, low maintenance alternative to traditional materials. Sta-Lok wire rope systems can be used in a variety of different structural and decorative applications. Some typical uses include fabric canopy support and tensions systems, bridge suspensions, structural bracing, balustrades, banners, mast rigging, awning and fixture hangers, staircase membranes, shop fitting and trellis. High quality 316 stainless steel wire rope is available in different constructions from high strength low stretch compacted strands to flexible 7 x 19. Sta-Lok wire rope fittings are expertly manufactured to the highest standards, gaining a world wide reputation for outstanding quality and reliability. Over 3,000 different components are currently manufactured, providing a wide range of different combinations, to suit all requirements, styles and fashions. Wire rope fittings are available in a variety of different finishes and can be individually purchased or as part of a complete made to measure assembly. End fittings and wire ropes are generally available from stock, wire assemblies are manufactured to order. Toggle End Assemblies Wire assemblies with toggle and end fittings provide a unique toggle action allowing full articulation in two planes. This is ideal for applications where flexibility or angular alignment is required. For wire sizes 3 up to 14. Fork End Assemblies Wire assemblies with fork end fittings are designed for applications where fixing brackets/steel work are in alignment. For wire sizes 3 up to 26. Sta-Lok Self Fit Terminals Sta-Lok manufacture a range of self fit wire rope fittings which allow on site assembly, using only simple hand tools. Exact length accuracy can be achieved without the need for premeasurement or calculation. All fittings exceed the breaking load of the wire rope. To help select the products or services which best suit your requirements, our technical specialists are always happy to provide innovative input and assistance. PLEASE CALL now for details Sta-Lok is able to provide a range of stainless steel wire ropes to suit all applications. Manufactured from high quality 316 stainless steel grade 1.4401, wire ropes are supplied coiled on 100 and 200 metre reels. Wire ropes can be cut to customers requirements at an additional cost. Dimensions and breaking loads conform to BS MA 29. Wire ropes available: 1 x 19 construction for general applications. Dyform compacted strand provides high strength and low stretch. 7 x 7 construction provides flexibility and is the stronger of the flexible wire ropes. 7 x 19 construction is the most flexible of the multi-strand wire ropes. 1 X 19 2 3.13 3 7.06 4 12.55 5 19.61 6 28.24 7 34.81 8 45.50 10 71.10 12 101.99 14 139.06 16 182.02 19 212.03 22 285.08 26 398.16 DYFORM Diameter Min Load 3 9.81 4 17.46 5 23.93 6 34.81 7 48.15 8 60.31 10 95.81 12 141.22 14 189.28 16 251.06 19 313.82 7 x 7 2 2.37 3 5.34 4 9.49 5 14.81 6 21.38 7 29.13 8 37.95 10 59.33 12 85.42 7 x 19 2 2.21 3 5.00 4 8.89 5 13.92 6 20.00 7 27.26 8 35.60 10 55.60 12 80.02 14 108.86 16 133.37 Figures based on Manufacturers Minimum Breaking Load
ROD SYSTEM Sta-Lok Tension Forks STANDARD CAPACITY Are available with left and right hand threads. Used in conjunction with each other they provide the most syetrical design and most economical method of tensioning rod rigging systems. Manufactured from the highest specification 316 stainless steel grade 1.4401. Fittings are available in a satin or polished finish. Sizes to suit ISO Metric threads M6 M27 and UNF threads 1/4" 1". Stainless Steel Rod Assemblies offer the ultimate in Architectural Rigging The Sta-Lok rod system is highly effective for architectural rigging providing an attractive, high quality, low maintenance alternative to wire rope rigging. Sta-Lok rods can be used in a variety of structural and decorative applications. Typical uses include: glass curtain wall supports, fabric canopy support and tension systems, roof tie rod and trusses, bridge suspensions, structural bracing, balustrades, awning and fixture hangers, and trellis. Manufactured from the highest specification materials, Sta-Lok offers a comprehensive range of Standard and High Capacity stainless steel rods and fittings. The Standard Capacity Rod System has been developed to meet most strength requirements, and is manufactured from 316 stainless steel. Fittings are available in either a satin or polished finish and can be individually purchased or as part of a complete made to measure assembly. End fittings are generally available from stock, rods are manufactured to order. Understanding the need for higher strength systems, Sta-Lok has also developed a High Capacity Range of products, for special applications requiring a higher load capacity, lighter weight, or a lower profile system. Manufactured from high tensile stainless steel alloys, these high capacity rods, connectors and forks are custom designed and tailored to meet the client s individual requirements. These items are made to order. Technical specialists are available to assist with design details and product selection. Please contact us for further details. Sta-Lok Fixed Forks STANDARD CAPACITY Are available with right hand ISO Metric and UNF threads. Designed for fixed length spans or where adjustment is provided by a turnbuckle. Sizes to suit ISO Metric threads M6 M27 and UNF threads 1/4" 1". Sta-Lok Rod Connectors STANDARD CAPACITY Are required for rod span greater than three metres in length. Designed to develop the full load of the rods, the rod connector is threaded left hand one end, right hand the other end to ensure that the rod assembly remains secure during tensioning. Sizes to suit ISO Metric threads M6 M27 and UNF threads 1/4" 1". High capacity fittings are manufactured to order. Stainless Steel Rods STANDARD CAPACITY Bar Dia Thread Breaking Proof Stress Metric Load 0.2% 6.4 M6 11.8 6.2 8 M8 21.8 11.5 10 M10 34.7 18.3 12.7 M12 50.6 26.7 16 M16 95.7 50.4 20 M20 135.0 78.8 22.2 M22 168.9 98.5 25.4 M24 194.5 113.5 28.7 M27 256.2 149.4 Stainless Steel Rod Assemblies offer the ultimate in Architectural Rigging The Sta-Lok rod system is highly effective for architectural rigging providing an attractive, high quality, low maintenance alternative to wire rope rigging. Sta-Lok threaded rods mean smaller end fittings reducing weight and maximising light distinct advantages over other systems. The Standard Capacity Rod System has been developed to meet most strength requirements, and is manufactured from 316 stainless steel grade 1.4401 available in diameters to suit ISO Metric threads M6 M27 and UNF threads 1/4" 1". Metric Imperial Minimum breaking loads are based on the core diameter of the thread. Bar Dia Thread Breaking Proof Stress Inch UNF Load 0.2% 1/4 1/4 14.3 7.5 5/16 5/16 22.9 12.1 3/8 3/8 35.3 18.6 7/16 7/16 47.6 25.1 1/2 1/2 64.8 34.1 5/8 5/8 104.3 54.9 3/4 3/4 137.8 80.4 7/8 7/8 188.4 109.9 1 1 245.0 142.9
SECURE... SAFER... SPECIFY... STA-LOK TERMINALS LIMITED Unit 6 Causeway End, Station Road, Lawford, Essex CO11 1AA, England Tel: +44(0) 1206 391509 Fax: +44(0) 1206 395286 Email: info@stalok.com