THE ORIGINAL GROUND-BREAKING PERFORMANCE DYNO DYNOJET! Dynojet is proud to be the originator of real-world chassis dynamometer technology. Until the arrival of Dynojet into the world of chassis dynamometer technology, performance chassis dyno-tuning was a relatively unused service that was out of reach for the typical performance shop, tuner, or enthusiast. Dynojet s quest to find a suitable chassis dynamometer led to the development of its own chassis dyno, which then laid the groundwork for dyno production and sales. Dynojet has a very unique position as the only dyno company that uses its own dynamometers on a daily basis in the development of performance products and dyno technology. Established in 1972, Dynojet is a Research & Development company, employing over 100 people in Montana, Nevada, Holland, Germany and England. Dynojet Research develops aftermarket performance products and diagnostic tools for the Motorcycle and Automotive industries. Dynojet s extensive product development testing required the use of a Dynamometer. Unable to find a Dynamometer to meet the needs of the Research & Development staff, Dynojet went to the drawing boards and pioneered the first single roller, inertia, chassis Dynamometer for motorcycles in 1989. Shortly thereafter Dynojet developed a computer interface and software package and began selling the first Model 100 Motorcycle Chassis Dynamometer. The Model 100 proved to be affordable, reliable, accurate and above all, consistent. This was the case not only from one measurement to the next, but also from one Dynojet Dynamometer to another, enabling communication and sharing of test data. The success of the Model 100 led to further developments in chassis dynamometer technology culminating with our current Model 250ix Powersports dynamometer. In the early 1990 s, the venerable model 248c Automotive chassis dynamometer was released to widespread acclaim and quickly became the tool of choice for the professional tuner. Many Nascar Race Teams adopted the Dynojet 248 with Dynojet eventually becoming the Officially Licensed Dynamometer of NASCAR. Further innovations led to the smaller, more compact design of the 224x dynamometer, and in 2003, the Eddy-Current equipped model 224xLC was released. The modular design of this 224 series was ideal for upgrades, leading to the release of the 424x and 424xLC2 all-wheel drive dynamometers, which build on the proven 224x platform. With the Linx system, Dynojet has once again lead the dyno industry with innovation. CUSTOMER SUPPORT THAT MATTERS! Dynojet Dynamometer Technical Support is unique. Unlike other companies who simply sell their equipment at Dynojet we use ours daily! This is important to dyno owners, because as a leading aftermarket product development company, Dynojet technicians have Real-World experience using the very dyno models they support. Whether it is providing on-track dyno support to top-tier race teams, in-house product development or after-hours personal tuning sessions, Dynojet technicians have the ability to provide data analysis and interpretation in addition to advanced dyno support. DURABILITY We build the Dynojet Dynamometer to last. It is a durable, low maintenance instrument. Our reputation and willing technical support are your guarantees that the Dynojet Dynamometer will live up to our promises. CREDIBILITY With the Dynojet Dynamometer it is easy to establish credibility for your shop or business. Before and after dyno runs on service or performance work help establish credibility. Today s customer wants to see proof that what he is paying for works. The biggest names in the industry trust Dynojet as the Industry Standard Names such as: Shelby American, K&N Engineering, Magnaflow Exhaust, Roush Yates Performance, SCT Flash, Graves Yamaha, Harley-Davidson, Yoshimura Suzuki, Powerblock on SpikeTV, and too many too list. THE WORLD STANDARD The Dynojet Dynamometer is the most widely recognized chassis dynamometer with more than 6,000 installations in over 60 countries. These installations include OEM motorcycle manufacturers, importers, exhaust manufacturers, tuners, race teams, dealers, service shops, motorcycle and ATV magazines. Dynojet has long term partnerships with industry leading companies worldwide, ensuring local technical support for most of our customers. GIL NEVAREZ SUPERVISOR/DIRECTOR SHELBY AMERICAN MOTORSPORTS EVERY CAR THAT GETS UP-GRADED AND TUNED HERE AT SHELBY AMERICAN MOTORSPORTS GOES ON OUR DYNOJET DYNO. WE WOULDN T BE ABLE DOCUMENT HORSEPOWER INCREASES FROM OUR PACKAGES WITHOUT IT. I VE USED IT FOR MANY YEARS TROUBLE FREE AND WOULDN T USE ANYTHING ELSE. 2 Dynamometers and Test Equipment WWW.DYNOJET.COM
TABLE OF CONTENTS Inertia Only Dynamometer Models 4-5 Model 224x 4 Model 424x 5 Load Control Dynamometer Models 6-9 Model 224xLC 6-7 Model 424xLC2 8-9 Automotive Dynamometer Upgrades 10-11 424 LINX Attachment 10 Eddy Current Brake/Real Time Torque 11 Model 224x All wheel Drive Attachment 11 Automotive Dynamometer Options 12-13 Dynojet Power Ramp 12 New DynoWare RT 14-17 Standard Features 14-15 DynoWare RT Accessories 16-17 PowerCore Software Suite 18-19 WinPep 8 Dyno Control 18 WinPep 8 Data Center 19 Dynamometer Training 19 USED BY TOP RACE TEAMS AND TUNING SHOPS... DOMESTICALLY performance products www.roushyatesparts.com AND INTERNATIONALLY TAUGHT ON AT THE TOP SCHOOLS CONTACT INFORMATION E-mail: US - dynosales@dynojet.com International - intdynosales@dynojet.com Phone: Toll Free - 800-992-3525 Local - 702-399-1423 Fax: US - 702-399-6385 FEATURED ON THE FOLLOWING SHOWS TOLL FREE: 1-800-992-3525 Dynamometers and Test Equipment 3
INERTIA ONLY DYNAMOMETERS The Dynojet Automotive Model 224x Dynamometer features a 24" knurled, precision balanced drums. The large drum diameters provide a virtually flat, stable surface for tire contact, eliminating unnecessary slippage and tire deformation. The result is precise, repeatable results every time. The Model 224x is rated at 2000 hp+, 2000 ft/lbs torque and up to 200 mph making it perfect for diagnosing engine and driveline problems, tuning and repair on most street driven vehicles. The Model 224x has quickly become Dynojet s best selling automotive dynamometer due to its affordable price, power measurement capacity, compact size for easier installation, and ability to grow with a shop s needs. THE 224X CAN BE CONFIGURED IN A PIT OR ABOVE GROUND STANDARD FEATURES AND EQUIPMENT MEASURES UP TO 2000 HP+, 2000 FT/LBS RATCHETS AND GROUND HOOKS) TORQUE, AND 200 MPH WHEEL CHOCKS WINPEP 7 SOFTWARE AND HARDWARE TO INTERFACE (PC, PRINTER, ETC. NOT AIR ACTUATED BRAKE SYSTEM INCLUDED) AUTOMATIC CONDITIONS MEASUREMENT (ABSOLUTE PRESSURE, AIR TEMP, HUMIDITY) IGNITION WIRE INDUCTIVE TACHOMETER PICKUP LEADS AUTO TIE DOWN PACKAGE (STRAPS, SHOWN WITH ABOVE GROUND KIT REMOTE SOFTWARE AND BRAKE CONTROL PENDANT INSTALLATION AND OPERATION MANUALS ONE YEAR REPLACEMENT PARTS WARRANTY 24/7 TECH SUPPORT VIA WINPEP.COM GONZALO TOPETE GTR HIGH PERFORMANCE OUR DYNOJET CHASSIS DYNO HAS PROVEN A SUPER TOOL THAT ALLOWS US TO NOT ONLY DIAGNOSE BUT TO ACCURATELY MEASURE/TEST OUR CUSTOMERS RWHP AND RWTQ... I JUST COULDN T IMAGINE OUR SHOP WITHOUT OUR DYNOJET DYNO! 4 Dynamometers and Test Equipment MODEL 224X SPECIFICATIONS Maximum Horsepower 2000 hp Maximum Speed 200MPH /322 KPH Maximum Torque 2000 ft/lbs Drums 1 Wheelbase Minimum N/A Wheelbase Maximum N/A Drum Diameter 24in / 61cm Drum Width Minimum Axle Width N/A Maximum Axle Width Maximum Axle Weight 3000lbs / 1120kg WWW.DYNOJET.COM
The Model 424x is comprised of two industry standard 224x s, capable of measuring 2000+ horsepower at each axle! Horsepower and torque are measured at each drum and can be displayed and/or logged independently, or combined. This features allows you to assess the vehicle s power split, and can also aid in troubleshooting drivetrain issues. The 424x is designed to grow with you as your testing needs change in the future. You can easily upgrade at any point with dual Eddy Current Load Absorption Units and/ or the new 424 Linx System (see page 12 for more information). STANDARD FEATURES AND EQUIPMENT MEASURES UP TO 2000 HP+, 2000 FT/ LBS TORQUE (PER DRUM), AND 200 MPH TESTS VEHICLES IN EITHER TWO-WHEEL OR ALL-WHEEL DRIVE MODES ABOVE-GROUND OR PIT INSTALLATION ACCESSORIES INCLUDED CONSISTS OF TWO MODEL 224X CHASSIS DYNAMOMETERS WINPEP 7 SOFTWARE AND HARDWARE TO INTERFACE (PC, PRINTER, ETC. NOT INCLUDED) AUTOMATIC CONDITIONS MEASUREMENT (ABSOLUTE PRESSURE, AIR TEMP, HUMIDITY) IGNITION WIRE INDUCTIVE TACHOMETER PICKUP LEADS AUTO TIE DOWN PACKAGE (STRAPS, RATCHETS AND GROUND HOOKS) WHEEL CHOCKS AIR ACTUATED BRAKE SYSTEM REMOTE SOFTWARE AND BRAKE CONTROL PENDANT INSTALLATION AND OPERATION MANUALS ONE YEAR REPLACEMENT PARTS WARRANTY 24/7 TECH SUPPORT VIA WINPEP.COM Dynojet was the first to develop an AWD inertia style chassis dyno, and the 424x has evolved into the premier solution for serious tuning shops. MODEL 424X SPECIFICATIONS Maximum Horsepower 2000 Hp (PER DRUM) Maximum Speed 200MPH /322 KPH Maximum Torque 2000 ft/lbs(per DRUM) Drums 2 Wheelbase Minimum 88in /224cm Wheelbase Maximum 140in / 356cm Drum Diameter 24in / 61cm The Model 424x dyno can accommodate up to a 140 wheelbase with just the touch of a button. Whether you are troubleshooting a 4-wheel drive pickup or tuning an all wheel drive vehicle, this is a system you should seriously consider. Drum Width Minimum Axle Width Maximum Axle Width Maximum Axle Weight N/A 3000lbs / 1120kg (PER DRUM) INERTIA ONLY DYNAMOMETERS TOLL FREE: 1-800-992-3525 Dynamometers and Test Equipment 5
When performing loaded testing, the Eddy Current Load Absorption Unit option utilizes an integrated Torque Cell to quantify power absorption in an ultra precise and consistent manner. Loaded test files are then available for review and analysis in the WinPEP 7 software. Additional highlights of this system include a quick and effective calibration routine that can be accomplished in under a minute. LOAD CONTROL DYNAMOMETERS STANDARD FEATURES AND EQUIPMENT MEASURES UP TO 2000 HP+, 2000 FT/ LBS TORQUE, AND 200 MPH EDDY CURRENT LOAD ABSORPTION UNIT, TORQUE CELL, AND DYNAMIC LOAD CONTROL SOFTWARE. PERFORM ADVANCED TESTS, INCLUDING STEP, SWEEP, AND ROAD LOAD SIMULATIONS WINPEP 7 SOFTWARE AND HARDWARE TO INTERFACE (PC, PRINTER, ETC. NOT INCLUDED) AUTOMATIC CONDITIONS MEASUREMENT (ABSOLUTE PRESSURE, AIR TEMP, HUMIDITY) IGNITION WIRE INDUCTIVE TACHOMETER PICKUP LEADS Get a Dynojet for results you can trust. THE EDDY CURRENT UNIT ATTACHES TO THE DRUM BY WAY OF A SPLINED SHAFT, FOR THE UTMOST IN RELIABILITY, CONSISTENCY AND REPEATABILITY. MODEL 224XLC SPECIFICATIONS Maximum Horsepower 2000 hp Maximum Speed 200MPH /322 KPH Maximum Torque 2000 ft/lbs Drums 1 Wheelbase Minimum N/A Wheelbase Maximum N/A AUTO TIE DOWN PACKAGE (STRAPS, RATCHETS AND GROUND HOOKS) WHEEL CHOCKS AIR ACTUATED BRAKE SYSTEM REMOTE SOFTWARE AND BRAKE CONTROL PENDANT INSTALLATION AND OPERATION MANUALS ONE YEAR REPLACEMENT PARTS WARRANTY 24/7 TECH SUPPORT VIA WINPEP.COM Drum Diameter Drum Width Minimum Axle Width Maximum Axle Width Maximum Axle Weight Peak Absorption 24in / 61cm N/A 3000lbs / 1120kg 800 hp JUSTIN STARKEY VMP TUNING I USE A DYNOJET 224XLC BECAUSE IT IS VERY CONSISTENT AND RELIABLE. IT GIVES ME ALL THE TOOLS I NEED TO TEST AND TUNE ON MODERN EFI VEHICLES. FEATURES LIKE LOAD CONTROL, ANALOG INPUTS FOR BOOST, EGT, AND MULTIPLE WIDEBANDS HAVE BEEN INVALUABLE. I WOULD NOT TRUST ANYTHING BESIDES A DYNOJET CHASSIS DYNO. MIKE WILSON TUNING DEPARTMENT LEAD / LEAD CALIBRATOR BAMA CUSTOM TUNING/AMERICAN MUSCLE WE COULDN T DO WITHOUT THE DYNOJET DYNO. WE SOLD OUR BRAND X DYNO AND STEPPED UP TO THE DYNOJET 224XLC 6 Dynamometers and Test Equipment WWW.DYNOJET.COM
THE 224XLC CAN BE CONFIGURED IN A PIT OR ABOVE GROUND The highly versatile Model 224xLC is the perfect choice for modern EFI Tuning Shops. Based on the 224x dyno, the 224xLC offers the simplicity and ease of use of an inertia only dyno, along with advanced testing capabilities of a Eddy Current load style dyno. Perform A-to-B comparison tests to quantify gains from various performance products, or enable the load control feature to perform step, sweep, or road load simulations. The Dynojet load control system is designed for ease of use spend more time tuning vehicles, as opposed to tuning your dyno. SHOWN WITH ABOVE GROUND KIT LOAD CONTROL DYNAMOMETERS TOLL FREE: 1-800-992-3525 Dynamometers and Test Equipment 7
LOAD CONTROL DYNAMOMETERS The 424xLC 2 is a versatile AWD chassis dyno that offers unparalleled features at an affordable price. At any time you can operate the dyno in inertia only mode for assessing gains from bolt-on modifications, or utilize the dual eddy current absorbers for advanced load testing. With two retarders, the 424xLC2 is capable of up to 1,600hp peak absorption. The wheelbase is adjusted with the touch of button and can handle all the popular AWD vehicles on the road today. Along with offering the precise control from the eddy current load absorption units, the system also eliminates any potential speed bias between the two drums with Speed Balance Technology. You can also easily upgrade to the new 424 Linx System at any time for a complete, all-in-one testing solution. The 424xLC2 can be configured in a pit or above ground SHOWN WITH ABOVE GROUND KIT 8 Dynamometers and Test Equipment WWW.DYNOJET.COM
As with the 224xLC, load tests can be performed including step, sweep and road load simulations. Closed loop load testing is also available and is extremely helpful for tuning engines by targeting RPM, speed, or percentage of load. A simple click of the mouse can switch the 424xLC2 back and forth between an inertia only, or load style chassis dynamometer. The torque cell calibration routine takes less than a minute to perform and guarantees that you can spend more time tuning vehicles, instead of the dyno. The 424 Linx is not just an automotive treadmill like other mechanically linked systems on the market, rather, it s a highly repeatable, reliable, and consistent means of testing performance. CHRIS JOHNSON SCT FLASH DYNOJET WAS OUR ONE AND ONLY CHOICE WHEN WE DECIDED TO CREATE OUR WORLD-CLASS DYNO FACILITY, WITH TWO SEPARATE DYNO CELLS, FOR 2WD AND AWD CALIBRATION DEVELOPMENT. MODEL 424XLC 2 SPECIFICATIONS Maximum Horsepower 2000 Hp (PER DRUM) Maximum Speed 200MPH /322 KPH Maximum Torque 2000 ft/lbs (PER DRUM) Drums 2 Wheelbase Minimum Wheelbase Maximum` Drum Diameter Drum Width 88in /224cm 140in / 356cm 24in / 61cm STANDARD FEATURES AND EQUIPMENT MEASURES UP TO 2000 HP+, 2000 FT/ LBS TORQUE (PER DRUM), AND 200 MPH TESTS VEHICLES IN EITHER TWO-WHEEL OR ALL-WHEEL DRIVE MODES TWO EDDY CURRENT LOAD ABSORPTION UNITS, TORQUE CELL, AND DYNAMIC LOAD CONTROL SOFTWARE. PERFORM LOADED TESTS, INCLUDING STEP, SWEEP, AND CLOSED LOOP ABOVE-GROUND OR PIT INSTALLATION ACCESSORIES INCLUDED CONSISTS OF TWO MODEL 224XLC CHASSIS DYNAMOMETERS WINPEP 7 SOFTWARE AND HARDWARE TO INTERFACE (PC, PRINTER, ETC. NOT INCLUDED) AUTOMATIC CONDITIONS MEASUREMENT (ABSOLUTE PRESSURE, AIR TEMP, HUMIDITY) Minimum Axle Width Maximum Axle Width Maximum Axle Weight MONITOR REAL TIME TORQUE ON EACH DRUM FOR MAXIMUM GAINS WHILE TUNING. N/A 3000lbs / 1120kg (PER DRUM) IGNITION WIRE INDUCTIVE TACHOMETER PICKUP LEADS AUTO TIE DOWN PACKAGE (STRAPS, RATCHETS AND GROUND HOOKS) WHEEL CHOCKS AIR ACTUATED BRAKE SYSTEM REMOTE SOFTWARE AND BRAKE CONTROL PENDANT INSTALLATION AND OPERATION MANUALS ONE YEAR REPLACEMENT PARTS WARRANTY 24/7 TECH SUPPORT VIA WINPEP.COM DYNOJET SPEED BALANCE TECHNOLOGY INCLUDED Adjustable wheelbase from: STANDARD 88in / 224cm to 130in /330cm OPTIONAL 9in / 249cm to 140in / 356cm Peak Absorption 1600hp LOAD CONTROL DYNAMOMETERS TOLL FREE: 1-800-992-3525 Dynamometers and Test Equipment 9
DYNAMOMETERS UPGRADES The 424 Linx is not just an automotive treadmill like other mechanically linked systems on the market, rather, it s a highly repeatable, reliable, and consistent means of testing performance. The Dynojet 424 Linx System is a simple, highly efficient design that incorporates a high speed Multi-V Rib Belt and pulleys that eliminates potential speed differentials between the dyno drums. This technology will allow you to test modern AWD vehicles without the fear of potentially damaging the center differentials, or activating intrusive stability control systems. It is also useful for those 2wd performance vehicles that require all four wheels to be rotating in order to avoid reduced power mode. The 424 Linx will also retain the full flexibility of your 424x or 424xLC2, just simply press a button to set the desired wheelbase. 424 LINX SPECIFICATIONS Maximum Horsepower 2000 Hp (PER DRUM) Belt Maximum Speed 177 MPH Pulleys Maximum Torque 650 ft/lbs (PER AXLE) 10 Dynamometers and Test Equipment 1 Multi-V Rib 4 Multi-V Rib CHRIS BLACK (AMS) AUTOMOTOSPORT, INC. AFTER HAVING USED MANY BRANDS OF DYNOS THROUGHOUT THE YEARS, I HAVE ALWAYS FOUND THAT I LIKE MY DYNOJET THE BEST. THE FACT THAT THE SYSTEM IS ONLY AS COMPLICATED AS YOU WOULD LIKE TO MAKE IT IS A REAL BENEFIT TO THOSE ABLE TO HARNESS ITS FUNCTIONALITY. CONSISTENT AND REPEATABLE RESULTS ARE VERY IMPORTANT TO US, WHICH IS WHY WE USE OUR DYNOJET FOR ALL OF OUR TESTING AND DEVELOPMENT WORK AT AMS. THE ABILITY TO COLLECT AND ORGANIZE DATA IS ESSENTIAL TO OUR WORK, AND OUR DYNOJET HELPS US DO THAT. WWW.DYNOJET.COM
When performing loaded testing, the Eddy Current Load Absorption Unit option utilizes an integrated Torque Cell to quantify power absorption in an ultra precise and consistent manner. Loaded test files are then available for review and analysis in the WinPEP 7 software. During a steady state test the dynamometer operator can view torque in real time, a great feature when performing live ECM tuning. Additional highlights of this system include a quick and effective calibration routine that can be accomplished in under a minute. RICK LEBLANC LIVERNOIS MOTORSPORTS WE VE TRUSTED DYNOJET DYNAMOMETERS FOR MANY YEARS BEGINNING WITH THE ORIGINAL MODEL 248 WHICH IS NOW PORTABLE AND STILL USED ON A DAILY BASIS TO THE VERY LATEST ALL-WHEEL DRIVE 424XLC2. The most versatile option, the 224xAWD attachment can be added to any existing Dynojet 224x or 248* dynamometer to make it allwheel-drive capable. Horsepower and torque are measured at each drum and can be displayed and / or logged independently, or combined. This attachment results in a system that can accommodate wheelbases from 88 to 140 with just the touch of a button. The 224x AWD Attachment is available in an above ground or pit configuration when upgrading from a 224x or 224xLC models. Adjustable wheelbase from 88 to 130 STANDARD or 98 to 140 -OPTIONAL 224X AWD SPECIFICATIONS Maximum Horsepower 2000 Hp (PER DRUM) Maximum Speed 200MPH /322 KPH Maximum Torque 2000 ft/lbs (PER DRUM) Drums 2 Wheelbase Minimum 88in /224cm Wheelbase Maximum` 140in / 356cm Drum Diameter 24in / 61cm Drum Width Minimum Axle Width N/A Maximum Axle Width Maximum Axle Weight 3000lbs / 1120kg (PER DRUM) Adjustable wheelbase from: STANDARD 88in / 224cm to 130in /330cm OPTIONAL 9in / 249cm to 140in / 356cm The 224xAWD upgrade for the 248 is available for in ground installation only. DYNAMOMETER UPGRADES TOLL FREE: 1-800-992-3525 Dynamometers and Test Equipment 11
DYNAMOMETER OPTIONS DYNOJET POWER-RAMP The Power-Ramps are used with 224x/224xLC Models and provide a unique alternative to a four-post lift. Unlike non-powered ramps, the Power-Ramps raise and lower the vehicle to the height of the dyno. This keeps vehicles level on the dyno, allows for shorter ramp platforms and saves 8.5ft of floor space compared to a traditional four-post lift! The ramps are securely attached to the dynamometer and are controlled by a push-button hydraulic system. The Power-Ramps are suited for vehicles with a maximum wheelbase of 132 in. It has a powder coated anti-slip surface for optimal traction. DYNOJET POWER RAMP SPECIFICATIONS Total length: 155in/ 393.7cm Total width 83in / 210.82cm Width(each ramp): 26.5 in / 67.31cm Approach angle: 8 Maximum weight per vehicle axle: 3500lbs / 1588kg Approximate total weight: 415lbs/ 188.24kg per ramp assembly 850lbs / 385.55kg total 12 Dynamometers and Test Equipment WWW.DYNOJET.COM
ABOVE GROUND KIT The Above Ground Kit when use in conjunction with a four-post lift, allows you to make changes to exhaust, gears, driveshafts and other drivetrain modifications right on the dyno during test sessions. (4 post lift sold separately) 4 POST LIFT Dynojet acts as a liaison to provide you with the proper 4 post application. Any technical questions should be directed to Rotary at (800) 532-6973. PIT COVERS Pit Covers shield open areas of pits, exposing the rollers only. This option is a standard feature for Model 424x and Model 424xLC2 and available for all other Dynojet Dynamometer Models to upgrade. DENNIS HENDRIX CUSTOMER SOLUTIONS & ADVANCED TRAINING (UTI) UNIVERSAL TECHNICAL INSTITUTE WE HAVE BEEN USING DYNOJET DYNAMOMETERS AT ALL OF OUR UTI CAMPUSES FOR MANY YEARS. DYNOJET HAS THE RIGHT EQUIPMENT AND SUPPORT THAT ALLOWS US TO TRAIN TECHNICIANS AT A HIGH LEVEL FOR THE INDUSTRY. DYNAMOMETER OPTIONS TOLL FREE: 1-800-992-3525 Dynamometers and Test Equipment 13
DYNAMOMETER HARDWARE THE NEXT GENERATION OF DYNOJET DYNAMOMETER ELECTRONICS AND SOFTWARE HAS ARRIVED. STANDARD WITH NEW DYNAMOMETERS AND AVAILABLE AS AN UPGRADE FOR EXISTING DYNOJET MODELS. CONSISTS OF ONE MAIN CONTROL MODULE WITH EXPANSION PORTS TO HANDLE ADDITIONAL DATA ACQUISITION NEEDS. 14 Dynamometers and Test Equipment WWW.DYNOJET.COM
TWO INDUCTIVE RPM INPUTS (up to 30,000 RPM). x Includes two (2) primary and one (1) secondary inductive RPM cables for use with various ignition types including coil on plug. FOUR DJ-CAN (Dynojet Controller Area Network) EXPANSION PORTS x To connect Dynojet performance electronics such as CMD- Automotive, Wide Band 2, Power Commander V, etc. TWO OPTICAL RPM INPUTS (up to 30,000RPM). x For use with Dynojet Optical RPM accessory- (not included). SIX DYNOWARE EXPANSION PORTS FOUR INDEPENDENT 0-5V ANALOG INPUTS. Sensors not included. x Accessory plug-and-play Dynojet Sensor Kits available for measuring pressure (boost or fuel) and temperature (thermocouple amplifiers). x Analog Sensor Cable Kit also available to connect customer supplied sensors to DWRT. ETHERNET COMMUNICATIONS WIRELESS NETWORK CAPABILITY. x Connect a wireless router to DWRT to control the dyno and PowerCore using a laptop, desktop or tablet PC. Update firmware and software through a internet network. TWO INFRARED TEMPERATURE SENSOR INPUTS. POWERCORE SOFTWARE SUITE WITH WINPEP 8 DYNO CONTROL AND DATA ANALYSIS INCLUDED WITH DYNOWARE RT. TWO ATMOSPHERIC SENSOR INPUTS. x Includes one (1) sensor for real-time weather conditions measurement. Secondary sensor accessory available for additional measurement (intake, air box, etc.). 10 BUTTON ENHANCED SAMPLE PENDANT x For remote control of DWRT and PowerCore DYNAMOMETER HARDWARE TOLL FREE: 1-800-992-3525 Dynamometers and Test Equipment 15
DYNAMOMETER HARDWARE OPTIONS x ANALOG SENSOR CABLE KIT- x Includes four (4) complete harnesses for connecting up to four customer supplied 0-5v analog sensors to DWRT. AFR-2 DynoWare RT (DWRT) AFR-2 measures air/fuel ratio. The Air Fuel Module houses the Dynojet Gen4 Air Pump for maintenance-free sampling of air/fuel ratio from the tailpipe of a vehicle and comes standard with one wideband oxygen sensor. There are two O2 sensor fittings on the module, so a second O2 sensor can be added, for dual bank AFR readings. AFR-2 can be daisy-chained for adding additional AFR-2 modules for reading up to 8 AFR inputs. Analog Channel Accessories DWRT comes standard with four (4) analog inputs for 0-5v sensors. Sensor kits are available for connecting Dynojet analog sensors or customer supplied sensors to DWRT. -14.7-45PSI PRESSURE SENSOR KIT- Includes one (1) sensor and harness. 0-100PSI PRESSURE SENSOR KIT- Includes one (1) sensor and harness. x x 0-500F THERMOCOUPLE AMP KIT- Includes one (1) thermocouple amplifier x and harness. 0-2000F THERMOCOUPLE AMP KIT- Includes one (1) thermocouple amplifier x and harness. Optical RPM Sensor Includes magnetic base, optical sensor and reflective tape. Recommended when testing vehicles with diesel engines. Also can be used for purposes such as measuring pulley slippage. Two optical sensors can be connected to DWRT. 16 Dynamometers and Test Equipment WWW.DYNOJET.COM
IR- Temp Sensor Infrared temperature sensor kit. Includes magnetic base, 0-500F sensor and harness for measuring surface temperatures. Two IR Temp sensors can be connected to DWRT. Remote Atmospheric Sensor Includes magnetic atmospheric sensor with 20 cable length. For use with the second DWRT atmospheric channel for reading temperature, humidity and absolute pressure at air intake of vehicle or elsewhere. O2 Sensor Kits Includes one wideband O2 sensor with harness for use with AFR-2 for dual air/fuel readings. Available in a 6ft or 12 ft harness length. EZ-RPM Module Reads vehicle RPM signal by plugging into cigarette/accessory port or connecting to battery posts. DJ-CAN Devices Dynojet Performance Products such as the WideBand 2 (vehicle mounted Air/Fuel gauge), CMD (Combustion Management Device), Power Commander 5 utilize the Dynojet Controller Area Network and can be connected directly to DWRT. This allows DWRT and PowerCore software suite to use any of the data from the device (depending on product, can include engine RPM, throttle position, air/fuel ratio, boost pressure and more). Custom Tuning Software Suites Save time and money! Popular tuning packages and software suites are available directly from Dynojet. Shops that are interested in the ability to scan and flash late model Ford and GM vehicles can purchase tuning solutions. DynoWare RT/PowerCore Requirements Components Minimum Requirement Suggested Operating System Windows XP (service pack 3) or higher Windows 7 or later Processor Dual Core Processor, 2 GHz or faster Intel Core i5 2.8GHz or faster Memory 4GB System Ram 6GB System Ram or more Hard Drive 100GB or larger (54MB required for program) 500GB or larger (54MB required for program) Monitor/Graphics Card 1280x1024 (SXGA) resolution or higher 1600x900 resolution or higher Network Adapter 1 free 10/100Mbps RJ45 Ethernet port 1 free 100Mbps RJ45 or Wireless External Media CD ROM drive CD ROM drive Printer Printer, if prints are needed Color printer if prints are needed. DYNAMOMETER HARDWARE OPTIONS TOLL FREE: 1-800-992-3525 Dynamometers and Test Equipment 17
DYNAMOMETER SOFTWARE POWERCORE IS A NEW PC BASED APPLICATION THAT PROVIDES DYNOJET DYNO OWNERS WITH THE MOST ADVANCED TUNING SOFTWARE PLATFORM AVAILABLE IN THE INDUSTRY! CONTROL THE DYNO, ANALYZE DATA, ADJUST/CREATE CALIBRATIONS AND MAPS FOR DYNOJET PRODUCTS AND UTILIZE REAL-TIME ON-BOARD DATA FROM VEHICLES RUNNING ON THE DYNO WinPEP 8 Dyno Control Connects PowerCore to DynoWare RT (DWRT); shows data live on gauges, starts/stops sampling, and sets up other functions such as load control and other dyno specific functions. SELECTABLE RPM SOURCE USED FOR LOGGING/LOAD CONTROL INDUCTIVE, OPTICAL, OBDII, DJ-CAN, OR 3RD PARTY RPM SOURCE CHANNEL SUPPORT FOR POPULAR NON-DYNOJET TUNING AND DATA LOGGING PLATFORMS CHANNEL SUPPORT FOR DYNOJET OBDII DATA-LINK INTERFACE EDITABLE GAUGE SCREEN WITH USER DEFINED DATA CHANNEL SELECTION, SCALING AND MORE DWRT WIRELESS AND NETWORK CAPABILITY FOR USE WITH LAPTOP, DESKTOP AND TABLET PC S SELECTABLE AIR/FUEL DATA SOURCE DWRT AFR-2 OR DJ-CAN DEVICES 18 Dynamometers and Test Equipment WWW.DYNOJET.COM
WinPEP 8 Data Center Provides enhanced viewing and analysis tools for dyno runs, DJ-CAN devices,.csv format data logs, and 3rd party sources. Views include graph / trace, table, and 3-D visualization. LOAD UP TO 12 DYNO RUNS OR DATA LOGS, EACH OF WHICH CAN CONTAIN UP TO 40 CHANNELS DWRT AFR-2 OR DJ-CAN DEVICES SYNCHRONIZE DATA CHANNELS FROM THE DWRT SYSTEM IN PERFECT ALIGNMENT WITH CHANNELS FROM SUPPORTED SYSTEMS, GIVING THE ABILITY TO SEE WHAT HAPPENED AND WHERE. BECOME A BETTER TUNER AS A RESULT OF GETTING BETTER DATA. CUSTOMIZATION OPTIONS ALLOW USERS TO ADJUST THE SOFTWARE FORMAT AND VIEWING TO THEIR LIKING, AND PROVIDES BETTER EXPORT VIEWING, PRINTING AND MORE. BACKWARDS COMPATIBLE TO ALL PREVIOUS WINPEP AND DOSPEP DYNO RUNS, SO USERS CAN USE PREVIOUS DYNO RUN FILES. SEND DYNO RUNS DIRECT TO EMAIL OR SOCIAL MEDIA. DATA CENTER GRAPH WITH ANALOG INPUTS, BOOST AND FRP TECHNICAL SUPPORT Dynojet provides industry leading technical support by means of remote computer access, toll-free telephone, and a Dynojet dyno owner exclusive website www.winpep. com. Access winpep.com for 24hour, 7 day a week assistance. Once registered, you can download available Software Updates, read through FAQ & Tech Tips, find RPM pickup locations and much more. The best thing about www.winpep.com is that our dynamometer owners contribute to the website. This guarantees that the information gained from the site applies to the real world. Don t see what you re looking for? E-mail us and we will get it for you and put it up on the site. DYNAMOMETER TRAINING On-Site Dynamometer Training Available. Dynojet provides two day on-site training for an additional fee. GRID VIEW DATA CENTER CSV LOG DYNAMOMETER SOFTWARE CONTACT DYNOJET FOR FURTHER INFORMATION (800) 992-3525 / TRAINING@DYNOJET.COM TOLL FREE: 1-800-992-3525 Dynamometers and Test Equipment 19