Atlantic Bird 12.5 West setup guide Satellite settings Satellite: Atlantic Bird - 12.5 West Frequency 11158Mhz (Transponder): Symbol Rate 22000 Polarity Vertical (polarization) FEC 2/3 Step 2.You need a dish aligned to Atlantic Bird 12.5 degrees West, the dish size will depend on your location. What you need: You will need a standard satellite dish with a digital universal LNB We recommend If you are getting a dish installation by a local satellite TV installation company, Explain to the installer that you already have a receiver (the satellite modem) and only require a standard dish installation similar to a standard Satellite TV installation pointing to 12.5 Degrees West and give them the satellite settings. If you are installing the system yourself you need to purchase a TV satellite dish and universal LNB from a local supplier and install the dish to 12.5 degrees West. You can use your satellite modem as meter to help you align the dish. Signal (dbw) Dish Size (cm) 38 200 43 150 45 110 47 90 48 80 51 60 Each line on the footprint represents 1dbw difference, 51dbw is the strongest signal level and 38dbw is the weakest Satellite modem signal meter Diagram of a typical Dish Installation Universal LNB F connector dish Coax cable Once you put the satellite settings in your satellite modem, you will get a green signal bar when you have aligned the dish correctly (displayed image is from Technisat Satellite modem, other modems brands will have different software but the same principle) Satellite Modem PC or network
2. Setup your satellite modem (all brands of satellite modem supported) Put the following settings in your satellite modem (consult your own satellite modem setup guide if you unsure of how setup your modem) Setting to be entered into DVB satellite modem: Satellite modem settings Provider: Micronet Satellite: Atlantic Bird - 12.5 West Frequency 11158Mhz (Transponder): Symbol Rate 22000 Polarity Vertical (polarization) Internet PID 3010, 3011, 3012, 3021 3. you need an account with a local ISP, (any dial up ISP) you can then dial up to the internet using your phone line but the speed will be slow (dial up speed)but once you login to the satellite you get super fast broadband speeds. After installing satellite dish and satellite modem Connect to your ISP connection through your, then login to the satellite with your Micronet account, and enjoy broadband speeds.
YOU NOW ARE READY TO CHOOSE A BROADBAND SERVICE FROM JUST 5 EUROS AND CONNECT INSTANTLY TO ENJOY BROADBAND SPEEDS. 4. Sign up a Micronet account via our website to get a username and password: www.getbroadbandanywhere.com Once you sign you will receive a username and password to connect, 5. Setup your proxies Open the Internet Explorer and click on Tools/Internet Options/Connections in the menu. Once you see the underneath screen highlight the dial-up connection you intend to use for Surfing via satellite and then click on Settings on the right. - now please tick the boxes Use a proxy server for this connection and Bypass proxy server for local addresses and click on Advanced.
- in the Advanced window please enter the following values: - Then in your general values change your home page to sdr.eutelsat.net (this is optional, but recommended so you don t have to type sdr.eutelsat.net into your browser every time you want to log-in or log-out) - Every time you open internet explorer it will bring the log-in page, but you don t have to log-in every time, you only have to log-in once after you connect to your dial-up, and logout once you have finished, all the times in between this, you can just ignore the login page. PS: if you disconnect from your dial up, you will need to log-in again. You can get to the login page at any time by clicking the home button in internet explorer
- now you can start your internet connection and connect to the site "sdr.eutelsat.net" and login with your assigned Micronet Broadband username and password. Click "Perform the operation" after you set operation to "connect". - having logged in successfully you receive the following confirmation screens:
- please take notice of the proxy settings and required PID s, which will always be displayed on the bottom of this login page, in case they changed after the publication of this manual. You can now start surfing at High Speed.
- to disconnect simply call up the page sdr.eutelsat.net again, choose disconnect and enter your username and password. Then click on Perform the operation.