KAMPANJE 1. JANUAR - 31. MARS 2015

KAMPANJE 1. JANUAR - 31. MARS 2015 CVJ mansjettverktøy Installs CVJ boots without removing drive shafts from the vehicle or the CV joint from the drive shaft. Composite body with simple control valve, works from standard workshop air supply. While fitting boot the tool can be removed from the air line when pressurized (arms open) and will maintain pressure until the release button is pressed. Laser Firehjulsapparat SEA BSL103 Fast, simple and accurate alignment of both front and rear wheels. Optimises vehicle performance and set up after installation or modification of steering or suspension components. Simple and fast to use, it is ideal for the busy professional workshop and has a fast return on investment - potentially adding value to every steering or suspension job. This fully portable kit is also ideal for track-day set up for the enthusiast. Works on practically all cars and light commercials with rim diameters between 330mm(13 ) and 560mm(22 ). Supplied with steering wheel clamp, wheel turn plates and wheeled storage rack. Supplied with comprehensive operating instructions. SEA GA70 989 KR 9,990 KR Masterkit timing VAG bensin+diesel Comprehensive setting/ locking combination kit for 1.2, 1.4, 1.6, 1.7, 1.8, 1.9, 2.0, 2.5 diesel and petrol engines fitted to Audi, Seat, Skoda and VW vehicles. Includes Service Position Support Guides required for service applications on some VAG vehicles. Supplied in carry-case. Timingsett FORD reim/kjededrift bensin+d Combination kit of setting and locking tools suitable for a wide range of Ford petrol & diesel engines. Also suitable for these engines fitted in Land Rover, Mazda, PSA, Suzuki and Volvo vehicles. Kit consists of camshaft, crankshaft/flywheel and tensioner locking tools, plus camshaft sprocket remover. Timing/låsesett BMW N47/N57 Dieselmotor Essential tools for timing the BMW/Mini N47/N57 1.6, 2.0 and 3.0 diesel chain drive engines. Kit includes camshaft setting plate, flywheel locking pin and crankshaft turning tool. Kit also includes HP pump sprocket retaining tool required during pump removal/replacement applications. Timing/låsesett BMW 1.8, 2.0 N42/N46/N46T Suitable for setting and adjusting the timing on N42 and N46 engines with the Valvetronic system. Also includes tools to align the twin Vanos unit. SEA VSE5044 SEA VSE5042A SEA VSE6121 SEA VSE5911A 1,599 KR 899 KR 599 KR 1,799 KR

Timingsett Diesel motor VAG - Reim drift Kamaksel og veivaksellåsesett FORD, MAZDA Timingsett Diesel motor VAG pumpedyse For VAG 1.4D, 1.9D, 2.0D TDiPD (Pumpe Duse) and 1.2D, 1.6D, 2.0D CR (Common Rail) engines with Mechanical (Friction Dampened) Belt Tensioner. Kit includes crankshaft locking tools (oval and round gears), plus camshaft and tensioner locking pins. Covers the complete range of Ford Duratec engines 1.25 through to 2.3 16v in both belt and chain drive variants. Set is suitable for these engines in Mazda and Volvo vehicles. For VAG 1.2D, 1.4D & 1.9D TDiPD (Pumpe Duse) engines with Hydraulic Belt Tensioner. Kit includes crankshaft locking tool (round gears), plus camshaft and tensioner locking pins. SEA VSE2358 129 KR SEA VSE5515 99 KR SEA VSE2356 79 KR Timingsett VAG 1.2/1.4TFSi/1.4/ 1.6FSi kjede Timingsett Bensinm. 1.0, 1.2og1.4 Ecotec Timingsett VAG 1.2D/1.4D/1.6D/ 1.9D/2.0D Timing kit suitable for 1.2/1.4TFSi and 1.4/1.6FSi engines. Kit contains essential tools for crank TDC positioning, camshaft setting and tensioner locking. Supplied in storage case. SEA VSE5956A Låsesett Dieselmotor Renault/Nissan 1.5dci 619 KR Kit includes locking tools for 1.0, 1.2, 1.4 EcoTec/ecoFlex (codes X and Z) chain engines. Also includes the timing disc position gauge for the timing sensor on the inlet camshaft. SEA VSE243 Låsesett GM Ecotec Twin Cam 299 KR Comprehensive kit covering engine timing and belt replacement on VAG 1.2-2.0D Pumpe Duse and 1.2, 1.6, 2.0D Common Rail diesels. Kit contains crankshaft locking tools for both oval and round crank gears, camshaft locking pins and tensioner adjustment tools. SEA VSE5951 Låsesett 1.4D/1.6D HDi/TDCi - reimdrift 649 KR Essential Tools for timing belt replacement on Renault/ Nissan 1.5D dci diesels. Covers engine codes K9K. These engines are also fitted in Suzuki and Dacia models. Designed to fit between camshaft sprockets to maintain camshaft timing position. Essential tools for timing belt replacement applications. Supplied as a pair. Set of locking pins for timing belt replacement on PSA 1.4 (DV4) and 1.6 (DV6) diesel engines fitted in Citroen, Peugeot, Ford, Mazda, Suzuki, Toyota and Volvo models. These timing pins lock and hold the camshaft, crankshaft, flywheel and HP pump in the timed position. 2 SEA VSE1901A Bits Spline M14x30mm 2 stk Manufactured from Chrome Vanadium. Specially designed for use on Ford bell housings. Use with 10mm spanner to access restricted areas. SEA AK5532 79 KR 30 KR SEA VS1700 Kjølesystem fyller Eliminates the introduction of bubbles and air-locks into the cooling system and dramatically reduces system filling time. No more time-consuming system bleeding. Reduces fluid waste and messy spills. Automatically conducts system leak test. Low profile design broadens application range especially for use on MPVs where lower windscreen lip might obstruct other tools. Simple operation requires workshop air supply and does not require fiddly interchange of vacuum and fluid hoses - as found on other versions of this tool. Supplied with 1300mm fluid hose. 79 KR SEA VSE5846 SEA VS0041 59 KR 799 KR

Timingsett Renault bensinmotor-reimdrift Timingsett VAG 1.6/1.8/1.8T/2.0 Bensin+d Suitable for timing belt replacement on the 1.4, 1.6, 1.8 and 2.0 engines fitted in Renault vehicles. These engines will require the use of associated tool, Model No. VSE5033, VSE5034 or VSE5734 Camshaft Sprocket Holding Tool, to loosen the camshaft sprocket bolts and VSE5035 Timing Belt Guide Roller Wrench. Timingsett Renault 1.4/1.6/1.8/2.0 16V SEA VSE5071 319 KR Essential Setting and Locking tools for timing belt replacement on a huge range of VAG diesel and petrol engines. Also suitable for chain in head service and tensioner applications on 1.8/1.8T engines. Includes camshaft, injection pump locking tools and cambelt tensioner tools. Timingsett 1.5D, 1.9D, 2.2D, 2.5D dci/di/dt SEA VSE5851 699 KR Updated kit suitable for timing belt replacement on 1.4, 1.6, 1.8 and 2.0 engines fitted in Renault vehicles. These engines will require the use of associated tool, Model No. VSE5033, VSE5034 or VSE5734 Camshaft Sprocket Holding Tool, to loosen the camshaft sprocket bolts. Kit features updated camshaft setting plate which avoids the camshaft position sensor on later 1.4 and 1.6 engines. SEA VSE5071A Servicesett for reimskifte VAG Bensinmotor 549 KR Essential tools for timing belt replacement on Renault/Nissan 1.5D, 1.9D, 2.2D & 2.5D dci diesel engines. Covers engine codes K9K, F9Q, G9T, G9U. These engines are also fitted in Vauxhall/Opel, Suzuki, Mitsubishi and Dacia models. Kit includes crankshaft locking pins, belt tensioner tools and camshaft setting plates. Timing/låsesett Dieselmotor OPEL/SAAB reim SEA VSE5871A 1,249 KR Suitable for belt tensioning the huge range of VAG 1.8/1.8T, 2.0FSi/TFSi twin camshaft engines. These belt drive engines also have a chain in head connecting the two camshafts. The kit includes the tools necessary for servicing the chain in head and establishing correct valve/camshaft timing. SEA VSE6171 599 KR Suitable for timing belt replacement on Vauxhall/Opel and Saab vehicles fitted with 1.9D CDTi/TiD/TTiD or 2.0D CDTi engines. Kit contains camshaft setting tools, crankshaft locking tool and tensioner pin. Supplied in storage case. SEA VSE5886A 499 KR 3

Verktøy for fjerning/ installering av reim Timing/låsesett VAG 2.4/2.5D reim Designed for the recommended removal and installation of elasticated or stretch drive belts fitted to modern auxiliary drive systems such as the alternator or power steering. Prevents damage to the pulley and prolongs the life of the belt. Two tools included, one for installation and one for removal. Fits most crankshaft pulleys. SEA VS787 229 KR Specialised kit for timing belt replacement of VAG vans with 2.4/2.5D diesels, including the latest common rail engines. Kit includes crankshaft pulley holding tool, camshaft setting plate, injection pump and crankshaft locking pins and tensioner adjuster. SEA VSE5559 599 KR Timing kit for dieselpumpe Timingsett Bensinm. BMW, MINI + PSA Suitable for timing distributor type diesel fuel pumps on engines fitted with Bosch VE Rotary, Kiki, Nippon Denso, CAV Rotodiesel - top entry ports. These systems are mainly found on car & light commercial vehicles. Supplied with dial SEA VSE2242 gauge in storage case. Låsesett twin cam universal 999 KR Essential tools for the removal/installation of the timing chain assembly on a range of BMW, Mini and PSA petrol engines. Kit includes balance shaft aligners, crankshaft gear holding tools and chain tensioner locking pin. Engine Setting/Locking Kits covering engine timing are available separately for each engine. SEA VSE6156 Diesel Engine Setting/Locking Kit - VAG 499 KR Designed to lock twin camshaft in the timed position when replacing the timing belt. Huge range of application coverage from closely positioned sprockets on many twin cams to more widely spaced cam/ injector pump sprockets on certain diesel engines. Features fine tooth adjustment, and extension bar for increased applications. Supplied in storage case. Suitable for the VAG 2.5 V6 diesel engines first introduced in 1997. Includes front end support guides, crankshaft locking pin, camshaft setting plates, injection pump locking pin, tensioner socket and tensioner locking pin. 4 SEA VSE888 309 KR SEA VSE2351 429 KR

Verktøysett m/piper og bits 1/4 40 deler Verktøysett m/lange og korte piper 1/4 Verktøysett m/piper og kombinasjonsnøkler Contents: 1/4 Sq Drive Sockets; 4, 4.5, 5, 5.5, 6-14mm, Extension Bars; 75, 150mm, 1/4 Sq Drive 72-Tooth Flip Reverse Ratchet Wrench with Quick Release, Spinner Handle, Universal Joint, 3/8 Sq Drive Female - 1/4 Sq Drive Male Adaptor, S2 Socket Bits; Slotted - 4, 5.5, 8mm, Phillips - #1, #2, #3, Security TRX-Star* - T8H, T10H, T15H, T20H, T25H, T27H, T30H, T40H, Security Hex - 2, 2.5, 3, 4, 5, 6, 8mm. SEA AK7949 Verktøysett m/lange og korte piper 3/8 379 KR Contents: 1/4 Sq Drive Standard Sockets; 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14mm, 1/4 Sq Drive Deep Sockets; 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14mm, Extension Bars; 75, 150mm, 1/4 Sq Drive 72-Tooth Flip Reverse Ratchet Wrench with Quick Release, Spinner Handle, Universal Joint, 3/8 Sq Drive - 1/4 Sq Drive Male Adaptor. SEA AK7950 Verktøysett m/piper store 1/2 28 deler 349 KR Sockets cover sizes from 8 to 22mm and spanners from 8 to 19mm. Includes 72-tooth gear-to-gear flip reverse comfort grip ratchet handle with push button quick release, 150mm extension bar, universal joint, driver bits, T-bar adaptor and spark plug sockets. SEA AK7951 Verktøysett stort 1/4, 3/8, 1/2 171 deler 599 KR Contents: Standard Sockets; 6-24mm, Deep Sockets; 8-19mm, 3/8 Sq Drive Spark Plug Sockets; 16, 21mm, Extension Bars; 75, 150mm, 3/8 Sq Drive Gear-to-Gear Flip Reverse Ratchet Wrench with Quick Release, Universal Joint, 1/2 Sq Drive - 3/8 Sq Drive Male Adaptor. SEA AK7952 Isolert verktøysett 18deler 3/8 VDE/TÜV 459 KR Contents: 1/2 Sq Drive Sockets; 8-24, 27, 30, 32mm, 1/2 Sq Drive Spark Plug Sockets; 16, 21mm, Extension Bars; 75, 125, 250mm, 1/2 Sq Drive 72-Tooth Gear-to-Gear Flip Reverse Ratchet Wrench with Quick Release, Universal Joint, 3/8 Sq Drive - 1/2 Sq Drive Male Adaptor. SEA AK7953 549 KR Isolert verktøysett 20deler 1/2 VDE/TÜV Covers sizes from 4 to 32mm. Includes 48-tooth gear-to-gear comfort grip ratchet wrenches, spark plug sockets, extension bars, female TRX-Star* sockets, socket bits, hex keys, bits, spinner handle and accessories. SEA AK7955 1,499 KR Contents: Sockets; 8, 10, 12, 13, 14, 17, 19, 22mm, 45-Tooth Flip Reverse Comfort Grip Ratchet Wrench with Push-Button Quick Release, Socket Bits (50mm); 4, 5, 6, 8mm, Locking Extension Bars; 150, 250mm, Locking T-Bar; 200mm. Skrallefastnøkler m/ ledd 16deler Chrome Vanadium steel ratchet spanners with WallDrive ratchet rings. 72-tooth ratchet ring and gear in hinged head. Content: Spanners; 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm, Socket Drive Adaptors; 1/4, 3/8, 1/2 Sq, Bit Holder; 1/4 Hex. SEA AK6382 SEA AK7940 1,299 KR 1,799 KR TRX-Star Pipe- og bitssett 30 deler Drop-forged Chrome Vanadium steel sockets. Hardened, tempered and satin/polished finish with knurled ring. Bits manufactured from S2 steel. SEA AK619 Contents: Sockets; 10, 11, 12, 13, 14, 17, 19, 22, 24, 27, 32mm, 45-Tooth Flip Reverse Comfort Grip Ratchet Wrench with Push-Button Quick Release, Socket Bits (100mm); 4, 5, 6, 8, 10mm, Locking Extension Bars; 150, 250mm, Locking T-Bar; 200mm. 219 KR SEA AK7941 Giroljepåfyllingssystem 3liter Pump operated oil dispensing unit with a three litre capacity. Supplied with five multi-purpose and three vehicle specific automatic transmission fluid adaptors. Features a fluid control and depressurising valve. SEA VS70095 1,999 KR 649 KR 5

Spesialverktøy f. veivakselremskive bolt Kamaksel verktøy Kamaksel låseverktøyvag 1.4, 1.6 16v/ FSi Specially designed for use where nuts/bolts are not easily accessible for air impact tools, or air is not available. Ideal tool for loosening crankshaft pulley bolts. Simply fit the required impact socket, keeping the arm at a right angle to the shaft for maximum torque, and strike the top of the tool with a hammer to shock the nut or bolt loose. Features hand guard for extra safety. Adjustable legs allow insertion of pegs into holes in camshaft pulleys. Suitable for coarse and fine positioning of camshaft for timing on a variety of vehicles including Ford Zeta and Zetec engines. SEA VS786 229 KR SEA VS173 129 KR Terminal verktøysett 12 deler Suitable for the removal of vehicle computer connectors and terminals. Designed for GM C3 systems but also has a general application for safe and fast removal of terminals on a wide range of vehicles. Colour coded aluminium handles make for easy identification. SEA VS920 299 KR Suitable for VAG 1.4/1.6 twin camshaft, belt drive, petrol engines introduced in 1997. Dependant on the engine variant/sprocket position, either the complete tool or the pins only may be required. SEA VSE2357A 259 KR Kamdrev avtrekkersett VAG Bryteverktøy med håndtak 4 deler Specially designed to remove camshaft sprockets with 5 and 6 spokes from Audi, Skoda and VW vehicles. Features ball end thrust screw to reduce damage to camshaft bolt. Kraftbits TRX-Star 6deler 1/2 SEA VSE5959 399 KR Security XZN-Spline Pipebits M16 1/2 f.vag Heavy-duty, angled shafts. Chrome Molybdenum steel with blackened finish. Textured comfort grip handles with hammer cap. Contents: 200, 300, 460, 610mm. SEA AK9105 Kraftbitssett 1/2 6 deler 289 KR Chrome Molybdenum steel impact sockets with 1/2 Sq drive. Phosphate finish for added corrosion resistance. Suitable for use with any impact tool. Sizes: T55, T60, T70, T80, T90, T100. 1/2 Sq Drive Chrome Vanadium steel socket with knurled ring and S2 steel bit. Suitable for gearbox drain plugs on Audi; A3, A4, A6, VW; Golf IV and LT. Specialist set of tools suitable for removal and adjustment of hubs, steering and suspension on selected VAG vehicles. Contents: Length 40mm; M14, M16, M18, Length 75mm; M14, M16, M18. 6 SEA AK5607 289 KR SEA SX107 SEA SX052 39 KR 219 KR

PC BASERT 4 KANALS OSCILLOSKOP FOR BIL One of the most competitively priced, PC-based scopes around and suitable for professional applications. High sample rate, multiple memory function and 4-channel display make this unit ideal for in-depth analysis of a variety of automotive sensors and components, and can be used with any compatible lap-top or PC. The scope also features a comprehensive collection of standard automotive diagnostic procedures, turning an otherwise complex process into a click of a button. The system is loaded with specimen waveforms allowing the operator to compare actual results with those expected. The 4-channel function allows multiple components to be compared simultaneously. SEA TA4000 6,490 KR 360 Oppladbar SMD LED inspeksjonslampe Unique and innovative 360 swivel and tilt function enables the light source to be positioned in any direction. Exclusive patented design owned and registered to Sealey. Each lamp houses 10 super bright SMD LEDs providing up to 400 lumens output with 120 spread of light, illuminating the whole work area. Includes an additional high power 3W LED in the end for use as a directional torch. High quality 2.2Ah Lithium-ion battery for longer life, no memory effect and a much slower discharge than traditional Ni-MH batteries. Operating Time: 3/6hrs. Charging Time: 4hrs. Min./Max. Length: 260/280mm. SEA LED360EU 449 KR Låsesett 2.3D, 3.0D, 3.0D Hdi Suitable for setting and locking Fiat 2.3D JTD diesel engine (belt driven timing), Fiat 3.0D JTD diesel engine (chain driven timing) and Citroen/Peugeot 3.0D Hdi diesel engine (chain driven timing). Set comprises camshaft setting pins, crankshaft locking pin and sensor locking pin. SEA VSE5037 309 KR 7

Avsender: Hellanor AS Industriveien 26 1481 HAGAN ALTA BERGEN BJERKA BODØ DRAMMEN E L V E R U M FREDRIKSTAD HAUGESUND KONGSVINGER LARVIK LILLEHAMMER MOLDE MYSEN N A M S O S NARVIK OSLO SARPSBORG SKIEN STAVANGER TROMSØ TRONDHEIM T Ø N S B E R G VERDAL ÅLESUND ARENDAL ASKER FAGERNES FØRDE GRAN HARSTAD KRISTIANSAND VOSS E-post: kundeservice@hellanor.no Telefon: 67 06 60 00 www.hellanor.no partner