Leaders In Industrial LED Lighting Solutions CleanLED Highbay/Lowbay Energy Efficient LED Lighting Solutions For Industry
Introduction The Safelux Lighting CleanLED Highbay and Lowbay fixtures are high performing, LED based luminaires that have been designed for industrial environments operating within the food and beverage sectors where cleanliness is paramount. Incorporating a number of unique features to make it easier to meet HACCP standards, the range is ideal for application in areas requiring protection from a variety of possible contamination sources including glass, mercury, dust, dirt and moisture whilst offering the many standard benefits associated with LED lighting technology. With added design features including a UNIQUE Zhaga compliant modular construction that ensures future proofing and the ability to upgrade fixtures rather than replace, the family of Highbay and Lowbay lighting is also available in a wide range of lighting levels from 8000 lumen to 20,000 lumen all with market leading efficiency >100 LPW. Integrated Philips LED, electronics and power driver technology ensures the CleanLED Highbay and Lowbay are both extremely energy efficient whilst offering consistent and continuous operation with no deterioration in performance or the need for costly ongoing maintenance typical of other lighting fixtures. In addition, the CleanLED series has been designed to comply with the latest requirements associated with BS EN 12464-1 the industry standard for lighting within indoor areas, making it easier for your organisation to meet necessary standards whilst minimising the number fittings and associated costs. Unique HACCPClean Design Features Food grade coating providing protection to micro organism growth and protection of the high thermally conductive materials. 100% mercury free fitting simplifying compliance to HACCP planning controls & recycling. 100% glass free construction completely eradicating any potential for glass contamination. No UV light reducing potential for insect attraction to operational areas. GMP compliant design, limiting the potential for cross contamination. Constructed from FDA or equivalent approved materials for use in the food & beverage industry. Clip free, sealed unit design reducing the potential for causes of contamination. Robust, high quality design that is extremely resistant to shock and vibration. IP65 approved construction (Optional). Optional GMP integrated SMARTLED to ensure maximum cost savings by automatically adjusting light levels dependant on the amount of light needed and the amount of light given by other sources or natural lighting use only the power necessary to deliver the exact amount of light that you decide is needed! 2"
Standard Features CRI > 80 ensuring best in class colour visibility. Essential for applications requiring quality inspection processes. Clean white light reduces fatigue particularly for night shifts and enclosed areas. Instant light no re-strike or warm up period required unlike traditional lighting solutions where it can take it up to 20 minutes to achieve full output particularly in cold environments. This also allows the use of occupancy sensors and light harvesting in areas not normally possible. Inbuilt temperature control technology for longer product life. Zhaga compliant UNIQUE Modular construction that enables to upgrade your fitting in the future should more efficient LED s become available. UNIQUE ability to adjust light modules to direct the light to exactly where you need it or to increase light intensity in the areas that suit YOUR needs. NO MORE reliance on fixed optic fittings. Very low heat generation for improved temperature control within the working environment ideal for areas where controlled or low operating temperatures are required. Highly efficient Philips lighting modules offering > 100LPW in all models. Extended product life span up to 50,000 hours. Suitable for new or retrofit installations. 5 year warranty on all modules. The CleanLED Highbay and Lowbay LED range offers tangible benefits including significant cost savings with lower energy bills and reduced maintenance and bulb replacement costs - with up to 50,000 hours life span you can fit and forget. Sustainability is at the core of our designs and with energy efficiency and reduced carbon emissions you can be sure that when opting for a LED fixture, your working environment will be well lit whilst enhancing your green credentials. Not only can you expect to get all the standard benefits associated with LED lighting technology the CleanLED series incorporates our unique HACCPClean design elements that make it ideal for installation in environments where hygienic safety standards are paramount. Features including LoGlare to reduce the impact of light glare, enhanced lighting controls as well as EasiFit connection designs for simpler, faster installation, ensure that our products offer the best in class LED lighting solutions for industrial use. 3"
Optional Features SmartLED" Choose from a range of optional add-on lighting controls from our SmartLED product range to maximise energy savings & cost savings: Optional Integrated Daylight Harvesting to maximum energy savings. Useful for areas where you have natural light or other light sources close by. This will enable you to set your light output to compensate for any external light sources, reducing energy consumption and driving up cost savings. Remember too much light not only costs money but can also be detrimental to good working conditions. Optional 1-10v remote dimming capability to allow the setting of the exact amount of light in the right location. Optional occupancy sensors that will detect whether an area is occupied or unoccupied. These types of controls will automatically switch lights on or off dependent upon whether the area is vacant or occupied further promoting energy savings. Manual dimming option that will allow you to set light levels at installation on individual fixtures. Mix and match optional SmartLED features to create a tailored lighting solution that meets your needs fully. Optional DALI ready ensuring ease of integration of digital lighting control systems. Modular construction and user adjustable directional lighting UNIQUE to Safelux Lighting. This feature allows users to direct the light to where it is needed without the constraints of fixed optics LoGlare" Unique innovative anti-glare technology with LoGlare: Optional Safelux Lighting unique LoGlare (Pat Pend) feature. Effectively diffuses light and significantly reduces light glare. Removes the need for glare guards. Improves workplace lighting conditions. Easifit" Simpler and faster installation and maintenance with EasiFit: Optional fast fit IP69K connector system. Ensures easy and faster installation of fittings reducing associated costs. Simplifies maintenance Enhance the performance of the luminaire by incorporating our additional optional features that have been designed to maximise capital investment ROI, further reduce costs and decrease energy consumption levels. Our range of optional features allow for tailored lighting solutions that meets exacts needs giving more choice and flexibility than ever before. With the ability to integrate a variety of intelligent lighting controls including daylight harvesting, occupancy sensors and dimming functionality, lighting levels throughout the operating environment are optimised to achieve even more energy and cost savings as well as provide optimum lighting design. 4"
LED lighting technology marks a stepped change in the world of lighting. Offering a number of significant benefits over traditional lighting, the advancement of LED lighting technology now makes it possible for industry to take full advantage of the well documented benefits such as reduced energy consumption and carbon emissions. have gone a stage further with innovative and unique designs that are tailored to meet the increasing challenges of ensuring a safe and efficient operating environment within food processing and manufacturing plants. With a focus on safety, cleanliness and robustness, our lighting designs deliver an extensive set of benefits that make it easier for food processors and food manufacturers to implement HACCP controls and even eliminate many of the risks associated with traditional lighting solutions. From easier sanitation, removal of potential contamination sources and better environmental lighting conditions, SafeLux s CleanLED series offers hygienic, safe and practically risk free lighting. Benefits Unique offers the most extensive range and combination of features and options on the market enabling customised, tailored lighting solutions that meet your exact needs whilst maximising energy and cost savings. Smooth FDA approved coating that ensures any chemicals, cleaning or other products do not remain on the surface. Constructed from FDA or equivalent approved materials simplifying compliance to regularity controls and standards. Completely glass free construction eliminating hazard of broken glass from fitting or bulb contaminating production lines that is undetectable by current HACCP controls. Sealed unit and clip free design reducing the potential for microorganism growth and dust traps or cross contamination particularly advantageous for hard to reach fixtures that may be difficult to include in sanitation and hygiene procedures. Zhaga compliant modular construction that allows for future proofing your investment User adjustable light module direction adjustment to give you the ability to direct light to where YOU need it or to increase light intensity in specific areas to suit YOUR needs such as quality inspection areas Performance Highly efficient >100LPW dramatically reduces energy consumption. Will last >50,000 hours operating life allowing you to fit and forget. The addition of light harvesting and / or occupancy sensors will significantly increase this life expectancy. Colour Render Index of >80 dramatically improves lighting in inspection/task areas. Minimal degradation of light output over the life of the product - does not fade or flicker. Performance does not suffer in low temperature environments including subzero conditions of up to -30C making it ideal for cold stores and chilled areas. Clean white light that is akin to daylight for the product lifespan. 5"
Financial Significant cost savings as a direct result of less energy usage typically up to 80%. With the optional integrated occupancy sensor and daylight harvesting the savings could be even more.. Extremely long useful life (> 50,000 hours) means eliminated spend on replacement blubs or management of end of life issues. Rapid ROI. Further cost savings from secondary systems such as air conditioning systems given the low heat generation from the fixtures. Save more on energy costs via occupancy sensor integration dim or completely switch off lights when you don t need them. Additional savings from daylight harvesting sensor integration reducing light output when ambient or external light sources are available resulting in less power consumption. Reduce energy consumption through dimming sensor integration. Benefits Environmental Contains no harmful pollutants like lead or mercury. Green energy that brings significant reduction in carbon emissions through marked reduction in energy consumption. Easy to recycle as contains no toxic elements. 6"
The CleanLED Highbay has been designed for use within a wide variety of industrial applications and with HACCPClean design features as standard, the fixture is ideal for application across food and beverage manufacturing and processing environments. Offering versatile mounting options and a light weight design, the CleanLED Highbay and Lowbay LED fixtures are suitable for both new and retrofit installation. With a unique EasiFit connector system, installation has never been easier no matter the location of lighting fixtures from aisles, close inspection and task areas to cold stores or chilled environments. With general application also possible, you can be sure that the CleanLED series can meet your lighting needs throughout businesses transforming your working environment with a best in class lighting solution that delivers uniform and optimum lighting where and when you need it. Key Applications Food Processing & Manufacturing Food Packaging Plants Beverage and Bottling Plants Food Distribution Centres Cold Stores & Chilled Areas Dairies Suppliers to the food and beverage industry where GMP and HACCP are essential prerequisites Applications Other Applications Industrial Manufacturing Environments Factories Warehouses Distribution Centres Garages & Parking Areas Workshops 7"
Ordering To place an order please use the model matrix table to identify the relevant product number. For optional extras please refer to the product code table below. MODEL MATRIX TABLE PRODUCT TABLE OPTIONAL FEATURES Model Power (W) Lumens Occ Sensor LoGlare Daylight Harvesti ng 1-10v Dimming capability * Dali ** EasiFit (IP69) HB1 144 15,000 HB2 105 11,000 LB1 121.6 16,000 STD LB2 60.5 8,000 STD HP HB1 196 20,000 * This feature will require either a secondary dimming capability or specifying the optional daylight harvesting modules. ** Dali is not available with the 1-10v dimming option PRODUCT CODE TABLE Model Occupancy Sensor LoGlare Daylight Harvesting 1-10v Dimming Dali EasiFit HB1 /1 /1 /1 /1 /1 /1 EXAMPLE ORDER CODE HB1 /1/1/1/1/0/0: CleanLED Highbay 14,000 lumens, with integrated occupancy sensor, daylight harvesting, LoGlare and 1-10v dimming option excludes DALI or EasiFit 8"
Contact If you would like any more information relating to our products or wish to discuss any of your lighting requirements please contact us via the email address below. Visit our website for more exciting product news and information. Email: sales@safeluxlighting.com Web: Contact Us 9"