120W High Bay II Datasheet Solid-State Lighting Series Features : Solid State Lighting Technology Superior Light Quality Reduce CO₂ Emission Energy Saving(120W) Ecologically Friendly Long Life-Time IP65 for AL reflector Copyright 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 1
Table of Contents General Information...3 Product Dimensions...3 Light Patterns...4 Product Information...5 Technical Data...5 Applications...7 Environmentally Friendly...9 Package Information...10 Installation Information...11 Revision History...12 About Edison Opto...12 Copyright 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 2
General Information Introduction 120W High Bay II is typically used in industrial applications. They have different sized enclosed reflector. Edison Opto. provides a better lighting solution of light in low/high ceiling applications. The appearance of Edison opto High Bay II is as similar as traditional High Bay lighting but it saves more energy and has lower light depreciation rates to decrease both energy and maintenance cost. Without complicated installation and too much limited condition, Edison Opto. 120W High Bay II provides a great lighting solution for industrial applications. Product Dimensions High Bay II with AL Reflector (IP65) Ø30 Ø153 Ø Unit: mm Tolerance: ±5 mm 345 245 Ø Ø360 Copyright 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 3
High Bay II with PC Reflector Ø30 Ø Ø153 Unit: mm Tolerance: ±5 mm 435 245 Ø Ø310 Light Patterns Beam Angle 30 Beam Angle 45 Beam Angle 55 Beam Angle 60 1600 800 800 400 2400 1200 1200 600 1600 cd/klm C0-C C90-C270 cd/klm C0-C C90-C270 cd/klm C0-C C90-C270 cd/klm C0-C C90-C270 Beam Angle 70 230 390 cd/klm C0-C18 0 C90-C270 Copyright 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 4
Product Information Product Type 120W High Bay II Product Order Code 7-HB02-02 Product Specification WATT COLOR ANGLE DRIVER REFLECTOR FUNCTION Code Type Code Type Code Type Code Type Code Type Code Type A2 120W 60 53 40 30 CW (6000K) CW (5300K) NW (4000K) WW (3000K) 3 30~39 8 4 40~49 D Internal 100V~277V External 100V~277V 0 No cover 7 1 14"Aluminum reflector 5 50~59 2 12" PC reflector 9 6 60~69 F > 70 Notes: 1. Avaliable selecion of color, angle, driver, reflector and function. 2. When choosing Driver Code D : External 100V~277V, you can choose Function Code 7 : Heatsink Al-Fin only. Heatsink Al- Fin 8 UL Only Built-in circuit AC 3M Technical Data Parameter Symbol Rating / Value Units Power Consumption -- 120 W Color Temperature -- 6000/5300/4000/3000 K Color -- Cool White Neutral White -- Warm White Field Angle (Al Reflector) -- 40 /60 /90 /120 Field Angle (PC Reflector) -- 140 Degree CRI -- CW-68 NW-75 -- WW-80 Weight (Al Reflector) -- 3.3±0.2 Weight (PC Reflector) 2.5±0.2 kg Operating Temperature T opr -30 ~ +40 C Storage Temperature T stg -40 ~ +60 C AC Input Voltage V 100~277 V Notes: 1. Power consumption has 10% tolerance. 2. The 40 o /60 o /90 o field angles have ± 10 o tolerances,and the 120 o /140 o field angle has ± 15 o tolerances. 3. The operating temperature* is based on the ambient temperature to the heatsink in 5 cm distance. 4. The luminary can t resist chemical substances, some kind like sulfur, salt or acidic substance. That will be damage LED. Copyright 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 5
High Bay II with AL Reflector (IP65) Power Consumption (W) Beam Angle Field Angle Color Flux Lux@ 4m Lux@ 6m Lux@ 8m Lux@ 10m Lux@12m Cool White 6500 lm 1200 530 290 185 125 30 40 Neutral White 5300 lm 950 420 230 145 100 Warm White 4500 lm 850 360 205 125 90 Cool White 7300 lm 730 310 175 110 75 45 60 Neutral White 6000 lm 580 253 135 85 60 120W Warm White 5200 lm 500 210 125 75 55 Cool White 7600 lm 600 260 145 95 65 55 90 Neutral White 6200 lm 480 210 115 65 50 Warm White 5400 lm 420 100 60 45 Cool White 7300 lm 340 145 80 50 35 60 120 Neutral White 6000 lm 270 120 65 40 26 Warm White 5200 lm 230 95 55 35 23 High Bay II with PC Reflector Power Consumption (W) Beam Angle Field Angle Color Flux Lux@ 4m Lux@ 6m Lux@ 8m Lux@ 10m Lux@12m Cool White 7200 lm 225 90 55 36 84 120W 70 140 Neutral White 5900 lm 185 75 45 28 68 Warm White 5200 lm 130 60 38 25 60 120W High Bay II luminous flux. Copyright 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 6
Applications Edison Opto. High/Low Bay can produce an intense light in a certain area. It can be easily installed or replaced a traditional High/Low Bay lighting in warehouse, factory, gymnasium, large outlet, and etc. Copyright 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 7
120W High Bay II Application. 24.00m 21.98 19.72 17.88 Module 15.72 13.88 Cabinet 11.72 9.88 7.73 5.89 3.82 1.98 0.0 20 30 60 100 120 140 160 0.01 5.01 10.01 15.01 22.00m No.of module: 20 Flux per module: 7,600lm Total Power: 2,400W Area: 528m 2 / 5,683ft 2 LPD: 4.55 W/m 2 / 0.42 W/ft 2 Workplan height: 0.85m Surface Workplane(0.85m) / Floor(0m) 20 Ceiling(8m) 70 Walls 50 Height of Room: 8.000 m, Mounting Height: 6.400 m, Light loss factor: 0.80, Values in Lux, Scale 1:309 E av [lux] E min [lux] E max [lux] 1703.392 17 112 21 24 6.13 13.68 3.77 200 29 83 120W High Bay II light plan example : warehouse application. 120W High Bay II light plan example : warehouse simulation picture. Copyright 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 8
Environmentally Friendly 120W High Bay II VS 400W Mercury Vapor Lamp Power Reduction by 70% Reduction of CO = 2 emission by 1286 kg = Saves 92 trees a year Mercury Vapor Lamp (400W) Edison High Bay (120W) KWh 4000 3000 2000 1000 3456 70% 1037 0 1 Year 1 dollars 1 1500 1 1000 Mercury Vapor Lamp (400W) Edison High Bay (120W) Saves:USD436.5 Saves:USD649 Saves:USD224 500 Saves:USD11.5 r 0 1 2 3 4 Year Note : Calculation based on 24 hours of daily operation. Copyright 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 9
Package Information High Bay II with AL Reflector (IP65) 120W Packge 120W Packge (driver external) Carton AL Reflector Packge Notes: 1. 1pc package of 120W heatsink length version : 215mm(width)*215mm(length)*460mm(height) 1pc package of 120W heatsink length version (driver external): 215mm(width)*275mm(length)*460mm(height) 2. Carton package : 300mm(width)*458mm(length)*485mm(height) (carton package contains 2pcs 120W packages) 3. AL Reflector Package : 395mm(width)*395mm(length)*170mm(height) (Reflector Package contains 5 pcs 14 reflectors) High Bay II with PC Reflector 120W Packge 120W Packge (driver external) Carton PC Reflector Packge Notes: 1. 1pc package of 120W heatsink length version : 215mm(width)*215mm(length)*460mm(height) 1pc package of 120W heatsink length version (driver external): 215mm(width)*275mm(length)*460mm(height) 2. Carton package : 300mm(width)*458mm(length)*485mm(height) (carton package contains 2pcs 120W packages) 3. PC Reflector Package : 220mm(width)*170mm(length)*460mm(height) (Reflector Package contains 3 pcs 12 PC reflectors, 3 pcs 12" iron rings, and accessories) Copyright 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 10
Installation Information High Bay AC wire AC terminal Cable installation of 120W High Bay II. Cable Output wire of High Bay AC wire with plug Phase Conductor (Line) Brown Any Neutral Conductor Blue Any Protective Conductor Cable color code of 120W High Bay II installation. Green-and-Yellow Green-and-Yellow Copyright 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 11
Revision History Versions Description Release Date 1 Establish order code information 2012/11/28 2 Revise Product Specification 2014/01/22 About Edison Opto Edison Opto is a leading manufacturer of high power LED and a solution provider experienced in LDMS. LDMS is an integrated program derived from the four essential technologies in LED lighting applications- Thermal Management, Electrical Scheme, Mechanical Refinement, Optical Optimization, to provide customer with various LED components and modules. More Information about the company and our products can be found at Copyright 2014 Edison Opto. All rights reserved. No part of publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photo copy, recording or any other information storage and retrieval system, without prior permission in writing from the publisher. The information in this publication are subject to change without notice. For general assistance please contact: service@edison-opto.com.tw For technical assistance please contact: LED.Detective@edison-opto.com.tw Copyright 2014 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 12