Solid-State Lighting Series High / Low Bay Datasheet High / Low Bay lighting is typically used in industrial applications. They have the same features as high bay lighting but with a different sized enclosed reflector. Edison Opto provides a better lighting solution of light in low/high ceiling applications. The appearance of Edison High / Low Bay is as similar as traditional High / Low Bay lighting but it saves more energy and has lower light depreciation rates to decrease both energy and maintenance cost. Without complicated installation and too much limited condition, Edison High / Low Bay provides a great lighting solution for industrial applications. Features : Solid State Lighting Technology Superior Quality Light Reduce CO₂ Emission Energy Saving(5W/1W/12W) Ecologically Friendly Long Life-Time IP65 Copyright 21 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 5
Table of Contents Nomenclature... 2 Dimensions... 3 Absolute Maximum Ratings... 4 Specifications... 4 Illuminance Specifications... 5 Light Pattern... 8 Applications... 9 Environmentally Friendly... 11 Package Information... 14 List of the modifications... 15 Nomenclature The following table describes the available colors, and wattage. E B 1 W - 5 - X1 X2 X3 X4 X5 X6 X7 X1 LED Item X2 Module X4 Emitting Color X5 Watt X6 Filed Angle X7 Serial No. Code Type Code Type Code Type Code Type Code Type Code Type Code Type E Edison B Bay W Cool White 5 5W 9º Driver external 1 H Neutral White 1 1W 1 4º 1 Driver internal 2 X Warm White 12 12W 2 6º 3 Heat-sink lengthen version 3 12º (Driver external) 4 Heat-sink lengthen version (Driver internal) Figure 1 : High / Low Bay nomenclature. Copyright 21 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 5 2
Dimensions EB1x - 5xx (5W) Ø153 146 245 Ø36 EB1x - 1xx (1W) Ø153 Ø153 28 38 23 33 Ø36 EB1x - 12xx (12W) Copyright 21 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 5 3 Ø36 Figure 2 : High / Low Bay dimensions. Notes: 1. Unit : mm. 2. Tolerance : ± 5. mm.
Absolute Maximum Ratings The following table shows electrical characteristics and operating temperature of Low/High Bay. Part No. Symbol Rating Units Plastic Housing Temperature T C 8 C Operating Temperature T opr -3~5 C Storage Temperature T stg -4~6 C AC Input Voltage(5W) V 9~264 V AC Input Voltage(1/12W) V 9~277 V LED Life Time 25, hrs EDIS Temperature T EDIS 8 C Table 1 : High / Low Bay absolute maximum ratings. Specifications The following describes the choices of color temperature, angles, and CRI of Low/High Bay for different demand. Part No. Rating Units Power Consumption 5 / 1 / 12 *1, 2 W Field Angle 4 / 6 / 9 / 12 Degree Color Temperature 53~63 / 38~45 / 28~32 K CRI 7 / 75 / 8 / Weight (EB1x - 5xx) 3.3±.2 kg Weight (EB1x - 1xx) 4.8±.2 kg Weight (EB1x - 12xx) 5.6±.2 kg Table 2 : Low / High Bay specifications. Notes: 1. Power consumption has 5% tolerance. 2. Thermal equilibrium at 5 degree C ambient. Copyright 21 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 5 4
Illuminance Specifications Luminous flux of 5W Low Bay. Power Consumption 5W Table 3 : Luminous flux of 5W Low Bay. Luminous flux of 1W High Bay. Part No. CCT Field Angle Flux (min.) Flux EB1W-51x 53~63K 4 21 lm 23 lm EB1H-51x 38~45K 4 175 lm 195 lm EB1X-51x 28~32K 4 165 lm 185 lm EB1W-52x 53~63K 6 235 lm 26 lm EB1H-52x 38~45K 6 2 lm 22 lm EB1X-52x 28~32K 6 19 lm 21 lm EB1W-5x 53~63K 9 24 lm 27 lm EB1H-5x 38~45K 9 21 lm 23 lm EB1X-5x 28~32K 9 2 lm 22 lm EB1W-53x 53~63K 12 235 lm 26 lm EB1H-53x 38~45K 12 2 lm 22 lm EB1X-53x 28~32K 12 19 lm 21 lm Power Consumption 1W Part No. CCT Field Angle Flux (min.) Flux EB1W-11x 53~63K 4 385 lm 425 lm EB1H-11x 38~45K 4 315 lm 35 lm EB1X-11x 28~32K 4 275 lm 35 lm EB1W-12x 53~63K 6 43 lm 48 lm EB1H-12x 38~45K 6 36 lm 4 lm EB1X-12x 28~32K 6 31 lm 345 lm EB1W-1x 53~63K 9 45 lm 5 lm EB1H-1x 38~45K 9 37 lm 41 lm EB1X-1x 28~32K 9 33 lm 36 lm EB1W-13x 53~63K 12 43 lm 48 lm EB1H-13x 38~45K 12 36 lm 4 lm EB1X-13x 28~32K 12 31 lm 345 lm Table 4 : Luminous flux of 1W High Bay. Copyright 21 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 5 5
Luminous flux of 12W High Bay. Power Consumption 12W Part No. CCT Field Angle Flux (min.) Flux EB1W-121x 53~63K 4 54 lm 6 lm EB1H-121x 38~45K 4 435 lm 485 lm EB1X-121x 28~32K 4 38 lm 425 lm EB1W-122x 53~63K 6 65 lm 67 lm EB1H-122x 38~45K 6 5 lm 55 lm EB1X-122x 28~32K 6 43 lm 48 lm EB1W-12x 53~63K 9 63 lm 7 lm EB1H-12x 38~45K 9 51 lm 57 lm EB1X-12x 28~32K 9 45 lm 5 lm EB1W-123x 53~63K 12 65 lm 67 lm EB1H-123x 38~45K 12 5 lm 55 lm EB1X-123x 28~32K 12 43 lm 48 lm Table 5 : Luminous flux of 12W High Bay. Copyright 21 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 5 6
Illuminance Specifications Lux with different distance for 5W Low Bay. Power Consumption 5W Part No. Lux@ 4m Lux@ 6m Lux@ 8m Lux@ 1m Lux@12m EB1W-51x 41 18 1 64 44 EB1H-51x 34 15 84 52 36 EB1X-51x 32 14 8 5 34 EB1W-52x 24 17 58 38 26 EB1H-52x 2 89 5 3 2 EB1X-52x 9 82 45 3 2 EB1W-5x 25 9 5 32 22 EB1H-5x 17 75 42 26 18 EB1X-5x 16 7 4 25 17 EB1W-53x 11 5 28 18 12 EB1H-53x 9 4 23 14 9 EB1X-53x 88 38 22 14 9 Table 6 : Lux with different distance for 5W Low Bay. Lux with different distance for 1W High Bay. Power Consumption 1W Part No. Lux@ 4m Lux@ 6m Lux@ 8m Lux@ 1m Lux@12m EB1W-11x 8 35 194 124 84 EB1H-11x 64 28 154 98 68 EB1X-11x 56 24 136 84 6 EB1W-12x 47 28 115 74 5 EB1H-12x 38 165 9 58 4 EB1X-12x 33 14 8 5 36 EB1W-1x 4 175 97 62 42 EB1H-1x 32 14 77 49 34 EB1X-1x 28 12 68 42 3 EB1W-13x 22 95 53 34 23 EB1H-13x 175 75 42 27 19 EB1X-13x 155 65 37 23 17 Table 7 : Lux with different distance for 1W High Bay. Copyright 21 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 5 7
Lighting Design Manufacturing Service Illuminance Specifications Lux with different distance for 12W High Bay. Power Consumption 12W EB1W-121x Lux@ 4m 112 Lux@ 6m 49 Lux@ 8m 27 Lux@ 1m 17 Lux@12m 118 EB1H-121x 9 39 215 138 96 EB1X-121x 78 33 19 118 84 EB1W-122x 665 29 161 13 7 EB1H-122x 535 23 128 82 57 EB1X-122x 46 195 113 7 5 EB1W-12x 56 245 136 87 59 EB1H-12x 45 195 18 69 48 EB1X-12x 39 165 95 59 42 EB1W-123x 31 135 75 48 33 EB1H-123x 25 11 6 38 26 EB1X-123x 21 9 52 32 23 Part No. Table 8 : Lux with different distance for 12W High Bay. Light Patterns 4 6 9 12 16 8 8 4 24 12 12 6 16 cd/klm C-C18 C9-C27 cd/klm EB1x - xx1x C-C18 C9-C27 EB1x - xx2x cd/klm C-C18 C9-C27 EB1x - xxx cd/klm C-C18 C9-C27 EB1x - xx3x Figure 3 : High / Low Bay light patterns. Copyright 21 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 5 8
Lighting Design Manufacturing Service Applications Edison High / Low Bay can produce an intense light in a certain area. It can be easily installed or replaced a traditional High / Low Bay lighting in warehouse, factory, gymnasium, large outlet, and etc. Figure 4 : High / Low Bay application. Copyright 21 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 5 9
Application 1W High Bay Application. 24.m 21.98 19.72 17.88 15.72 13.88 11.72 9.88 Module Cabinet 7.73 5.89 3.82 1.98. 1 15 2 4 8 9 1 11 12 lux.1 5.1 1.1 15.1 22.m No.of module: 2 Flux per module: 5,lm Total Power: 2,W Area: 528m 2 / 5,683ft 2 LPD: 1.89 W/m 2 /.18 W/ft 2 Workplan height:.85m Height of Room: 8. m, Mounting Height: 6.4 m, Light loss factor:.8, Values in Lux, Scale 1:39 Surface E av [lux] E min [lux] E max [lux] Workplane / 112 2.23 143 Floor 2 74 4.3 132 Ceiling Walls (4) 7 5 14 16 9 2.48 19 55 Figure 5 : High / Low Bay light plan example : warehouse application. Figure 6 : High / Low Bay light plan example : warehouse simulation picture. Copyright 21 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 5 1
Environmentally Friendly With the increasing demand for energy and the effect on global warming, Edison Opto plays a role in preserving the forest by reducing energy consumption, and CO2 emission one step at a time. Replacing traditional mercury vapor lamp with Edison Opto EdiStar Module lighting application, one can help in reducing golbal warming by lots of CO2 annually. 5W Low Bay VS 1W Mercury Vapor Lamp Power Reduction by 5% Reduction of CO = 2 emission by 168 kg = Saves 12 trees a year Mercury Vapor Lamp (1W) Edison Low Bay (5W) KWh 1 5 864 5% 432 1 Year dollars 5 4 Mercury Vapor Lamp (1W) Edison Low Bay (5W) Saves:USD57.4 Saves:USD118.9 3 Balance 2 1 1 2 3 4 Year Figure 7 : 5W Low Bay VS 1W Mercury Vapor Lamp. Note : Calculation based on 24 hours of daily operation. Copyright 21 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 5 11
Environmentally Friendly 1W High Bay VS 25W Mercury Vapor Lamp Power Reduction by 6% Reduction of CO = 2 emission by 55 kg = Saves 36 trees a year Mercury Vapor Lamp (25W) Edison Low Bay (1W) KWh 3 2 1 216 6% 864 1 Year dollars 1 Mercury Vapor Lamp (25W) Edison Low Bay (1W) Saves:USD336.7 Saves:USD212.3 5 Saves:USD87.9 Balance 1 2 3 4 Year Figure 8 : 1W High Bay VS 25W Mercury Vapor Lamp. Note : Calculation based on 24 hours of daily operation. Copyright 21 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 5 12
Environmentally Friendly 12W High Bay VS 4W Mercury Vapor Lamp Power Reduction by 7% Reduction of CO = 2 emission by 1286 kg = Saves 92 trees a year Mercury Vapor Lamp (4W) Edison Low Bay (12W) KWh 4 3 2 1 3456 7% 137 1 Year 1dollars 15 1 Mercury Vapor Lamp (4W) Edison Low Bay (12W) Saves:USD649 1 1 Saves:USD436.5 Saves:USD224 5 Saves:USD11.5 1 2 3 4 Year r Figure 9 : 12W High Bay VS 4W Mercury Vapor Lamp. Note : Calculation based on 24 hours of daily operation. Copyright 21 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 5 13
Package Information 1.5W Packge 2.1W Packge 3.1W Packge (driver external) 4.12W Packge 5.12W Packge (driver external) 6.Reflector Packge Notes : 1. 5W Package : 17mm(width)*17mm(length)*315mm(height) 2. 1W heatsink length version : 17mm(width)*17mm(length)*45mm(height) 3. 1W heatsink length version (driver external) : 17mm(width)*22mm(length)*45mm(height) 4. 12W heatsink length version : 17mm(width)*17mm(length)*46mm(height) 5. 12W heatsink length version (driver external) : 17mm(width)*22mm(length)*46mm(height) 6. PC Reflector Package : 22mm(width)*17mm(length)*46mm(height) (Reflector Package contains 5 pcs 14 reflectors) Figure 1 : High / Low Bay package. Copyright 21 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 5 14
List of the Modifications Versions Modification Date 1 1. Establish a Datasheet. 21.2.1 2 3 1. Update the Flux and Lux of the Illuminance and Field Angles. 1. Update the Flux and Lux of the Illuminance. 2. Update the Nomenclature of the Specifications. 21.5.3 21.7.1 4 1. Revised the size of heatsink. 21.1.13 5 1.Revised the AC Input Voltage of Absolute Maximum Ratings 211.1.14 Table 4 : list of the modifications for High / Low Bay. Copyright 21 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 5 15