Training Courses - 2015 Motion and Drives
Parker Hannifin The global leader in motion and control technologies Global Product Design Parker Hannifin has more than 40 years experience in the design and manufacturing of drives, controls, motors and mechanical products. With dedicated global product development teams, Parker draws on industry-leading technological leadership and experience from engineering teams in Europe, North America and Asia. Local Application Expertise Parker has local engineering resources committed to adapting and applying our current products and technologies to best fit our customers needs. Manufacturing to Meet Our Customers Needs Parker is committed to meeting the increasing service demands that our customers require to succeed in the global industrial market. Parker s manufacturing teams seek continuous improvement through the implementation of lean manufacturing methods throughout the process. We measure ourselves on meeting our customers expectations of quality and delivery, not just our own. In order to meet these expectations, Parker operates and continues to invest in our manufacturing facilities in Europe, North America and Asia. Electromechanical Worldwide Manufacturing Locations Europe Littlehampton, United Kingdom Dijon, France Offenburg, Germany Filderstadt, Germany Milan, Italy Asia Wuxi, China Jangan, Korea Chennai, India North America Rohnert Park, California Irwin, Pennsylvania Charlotte, North Carolina New Ulm, Minnesota Local Manufacturing and Support in Europe Parker provides sales assistance and local technical support through a network of dedicated sales teams and authorized technical distributors throughout Europe. For contact information, please refer to the Sales Offices on the back cover of this document or visit www.parker.com Offenburg, Germany Milan, Italy Littlehampton, UK Filderstadt, Germany Dijon, France 1 2
TRAINING COURSE 2015 Table of Parker Training Courses 4 Our Technology Trainers 4 Training Schedule 2015 - Offenburg 5 Training Schedule 2015 - Milan 6 Training Schedule 2015 - Littlehampton 7 SK-PAC 8 SK-PSD 9 SK-T11 10 SK-T30 11 SK-T40 12 SK-SSA 13 SK-Com 14 SK-XL 15 SK-LD / SK-Linear Actuator 16 SK-ETH 17 SK-SERVOsoft 18 SK-Safety 19 SK-Workshops 20 SK-SLVD-N 21 SK-TPD-M 22 SK-Motornet DC 23 SK-Hi-Drive 24 SK-TWIN-N/SPD-N 25 SK-AC10 26 SK-AC30V 27 SK-AC30 PDD 28 SK-AC890 29 SK-DC Drives 30 SK-TS8000 31 SK-Custom 32 Training in Dijon 33 Registration 34 Terms of Registration and Entry 34 Starter Kits 35 EME Value Added Services 37 Seminar According to Customer Specifications All training seminars can also be held at your premises and according to your special requirements, if desired. Please do not hesitate to contact us! 3
Parker Training Courses Helping our customers become self-sufficient With a number of different courses running throughout the year covering all aspects of our drives range and meeting the specific needs of designers, programmers and maintenance staff, Parker Electromechanical and Parker SSD Drives provide their customers with the necessary skills to enable them to support their own equipment without the need of external assistance. In this brochure you will find a full list of currently available courses in our factories of Offenburg, Milan, Littlehampton and Dijon. Who are the courses for? Electrical and Maintenance Engineers, OEM and System Integration Engineers, Plant and Maintenance Managers. The qualifications for participation in this training seminars are basic as well as special knowledge in the respective area of usage of the product. In order to impart a profound knowledge, the maximum number of participants per training is limited to 8 persons. Our Technology Trainers Offenburg Milan Joachim Tschopp call: +49 (0)781 509-4442 jtschopp@parker.com Joachim Tschopp joined Parker in 1985 as Development Engineer. In 1992 he started working as Application Engineer in the Application Team for Servo Drives. Since 2002 he is the Training Manager at the Offenburg Location, applying his comprehensive product experience to the training of technical product seminars. Manuel Finotto call: +39 (0)2 361081 manuel.finotto@parker.com Manuel joined Parker in 2014 as Business Development Manager for South Countries. He has significant experience in technical sales and in motion controls applications. Littlehampton Ted Soukal call: +44 (0)1903 737000 Ted.Soukal@parker.com Ted joined SSD in 2000 and has extensive experience of drive hardware and software gained through test development and technical support. He is now an Application's Engineer for internal and external drive training since. Dijon Olivier Delor call: +33 (0)3 80 42 40 52 odelor@parker.com Olivier Delor has been working at Parker since 2002, starting in the R&D department. Now, he is Product Manager for DC and special motor (Spindle, ATEX and Torque Motor). During these years, Olivier has gained a consistent experience in servomotors and special applications With such a long experience, our Training Team is ideally placed to offer the best possible level of support to our customers. 4
Training Schedule 2015 - Offenburg Seminar Brochure 2015 January February March April May June July August September October November December 1 New Year 1 1 1 1 Labor Day 1 1 1 1 1 1 All Hallows 1 2 2 6. 2 Carnival 10. 2 2 2 23 2 2 2 2 2 45. 2 3 3 3 SK-PSD-1 D 3 Good Friday 3 3 3 3 32. 3 3 3 3 4 4 4 SK-PAC-1 D 4 4 19. 4 Corpus Christi 4 4 4 4 Germ. Unificat. Day4 4 5 2. 5 5 SK-PAC-1 D 5 Easter Sunday 5 5 5 5 5 5 41. 5 5 6 Twelfth Day 6 6 SK-PAC-1 D 6 Easter Monday 15. 6 6 6 28. 6 6 6 6 6 7 7 7 7 7 7 7 SK-PSD-4 E 7 7 37. 7 SK-ETH E 7 7 50. 8 8 8 8 8 8 24. 8 SK-PAC-4 E 8 8 8 8 8 9 9 7. 9 11. 9 9 9 9 SK-PAC-4 E 9 9 9 9 46. 9 10 10 10 10 10 10 10 SK-PAC-4 E 10 33. 10 10 10 10 11 11 11 11 11 20. 11 11 11 11 11 11 11 12 3. 12 12 12 12 12 12 12 12 12 42. 12 12 13 13 13 13 16. 13 13 13 29. 13 13 13 SK-PSD-6 E 13 13 14 14 14 14 14 Ascension Day 14 14 14 14 38. 14 SK-PAC-6 E 14 14 51. 15 15 15 15 SK-ETH D 15 15 25. 15 15 15 SK-PSD-5 D 15 SK-PAC-6 E 15 15 16 16 Rosenmontag8. 16 12. 16 16 16 SK-PSD-3 D 16 16 16 SK-PAC-5 D 16 SK-PAC-6 E 16 47. 16 17 17 17 SK-T11 E 17 17 17 SK-PAC-3 D 17 17 34. 17 SK-PAC-5 D 17 17 17 18 18 18 SK-T30 E 18 18 21. 18 SK-PAC-3 D 18 18 18 SK-PAC-5 D 18 18 18 19 4. 19 19 SK-LD E 19 19 SK-T11 D 19 SK-PAC-3 D 19 19 19 19 43. 19 19 20 SK-T11 D 20 20 20 17. 20 SK-T30 D 20 20 30. 20 20 20 20 20 21 SK-T30 D 21 21 21 SK-PSD-2 E 21 SK-T40 D 21 21 21 21 39. 21 21 21 52. 22 SK-LD D 22 22 22 SK-PAC-2 E 22 SK-T40 D 22 26. 22 22 22 22 22 22 23 23 9. 23 13. 23 SK-PAC-2 E 23 Whit Sunday 23 23 23 23 23 23 48. 23 24 24 24 24 SK-PAC-2 E 24 Whit Monday 24 24 24 35. 24 24 24 SK-T11 E 24 25 25 25 25 25 22. 25 25 25 25 25 25 SK-T30 E 25 1. Christmas Day 26 5. 26 26 26 26 26 26 26 26 26 44. 26 SK-T40 E 26 2. Christmas Day 27 27 27 27 18. 27 27 27 31. 27 27 27 SK-T11 D 27 SK-T40 E 27 28 28 28 28 28 28 28 28 28 40. 28 SK-T30 D 28 28 01. 29 29 29 29 29 27. 29 29 29 29 SK-LD D 29 29 30 30 14. 30 30 30 30 30 30 30 30 49. 30 31 31 31 31 31 31 31 New Year's Eve SK-T11 Introduction to the Compax3 Drive Controller Technology SK-T40 C3 T40 Technology Function»Electronic Cam«SK-PAC PAC Controller SK-ETH Safety Technology SK-T30 Programming based on IEC61131-3 SK-PSD PSD Servo Drive SK-LD Linear Drive Technology/Direct Drive Technology 5
Training Schedule 2015 - Milan January February March April May June July August September October November December 1 New Year 1 1 1 1 Labor Day 1 1 1 1 1 1 All Hallows 1 2 2 6. 2 10. 2 2 2 23 2 2 2 2 SK-PSD 2 45. 2 3 3 3 3 Good Friday 3 3 SK-PSD 3 3 32. 3 3 3 3 4 4 4 SK-PAC 4 4 19. 4 4 4 4 4 4 4 5 2. 5 SK-SLVDN 5 SK-PAC 5 Easter Sunday 5 5 5 5 5 5 41. 5 5 6 Twelfth Day 6 6 6 Easter Monday 15. 6 6 6 28. 6 6 6 6 6 7 7 7 7 7 7 7 7 7 37. 7 7 7 50. 8 8 8 8 8 8 24. 8 8 8 8 8 8 9 9 7. 9 11. 9 SK-PSD 9 9 9 9 9 9 9 46. 9 10 10 10 10 10 10 10 10 33. 10 SK-Hi Drive 10 10 10 11 11 11 11 11 20. 11 11 11 11 11 11 SK-PAC 11 12 3. 12 SK-Motornet 12 12 12 SK-SLVDN 12 12 12 12 12 42. 12 SK-PAC 12 13 13 13 13 16. 13 SK-Hi Drive 13 13 29. 13 13 13 13 13 14 14 14 14 14 14 14 14 14 38. 14 14 14 51. 15 SK-HI Drive 15 15 15 15 15 25. 15 15 15 SK-Motornet 15 SK-SLVDN 15 15 16 16 8. 16 12. 16 16 16 16 16 16 SK-PAC 16 16 47. 16 17 17 17 17 17 17 17 17 34. 17 SK-PAC 17 17 17 18 18 18 18 18 21. 18 18 18 18 18 18 18 19 4. 19 SK-LD 19 19 19 SK-Motornet 19 19 19 19 19 43. 19 19 20 20 20 20 17. 20 20 20 30. 20 20 20 20 20 21 21 21 21 21 SK-LD 21 21 21 21 39. 21 21 21 52. 22 22 22 22 22 22 26. 22 22 22 22 22 22 23 23 9. 23 13. 23 23 Whit Sunday 23 23 23 23 SK-LD 23 23 48. 23 24 24 24 24 24 Whit Monday 24 24 24 35. 24 24 24 24 25 25 25 25 25 22. 25 25 25 25 25 25 25 1. Christmas Day 26 5. 26 26 26 26 SK-PAC 26 26 26 26 26 44. 26 26 2. Christmas Day 27 27 27 27 18. 27 SK-PAC 27 27 31. 27 27 27 27 27 28 28 28 28 28 28 28 28 28 40. 28 28 28 01. 29 29 29 29 29 27. 29 29 29 29 29 29 30 30 14. 30 30 30 30 30 30 30 30 49. 30 31 31 31 31 31 31 31 New Year's Eve SK-LD Linear drives SK-Motornet DC Motornet DC SK-SLVD-N AC servo drives SK-PAC PAC Controller SK-Hi-Drive AC Servo Drives SK-PSD PSD Servo Drive 6
Training Schedule 2015 - Littlehampton January February March April May June July August September October November December 1 New Year 1 1 1 1 Labor Day 1 1 1 1 1 SK-890 1 All Hallows 1 SK-AC10 2 2 6. 2 SK-Custom 10. 2 2 2 SK-AC10 23 2 2 2 2 SK-590 2 45. 2 SK-AC30 3 3 SK-AC10 3 SK-Custom 3 Good Friday 3 3 SK-AC30 3 3 32. 3 3 3 SK-PDD 3 SK-890 4 4 SK-AC30 4 SK-Custom 4 4 19. 4 SK-890 4 4 4 4 Germ. Unificat. Day4 SK-PDD 4 SK-590 5 2. 5 SK-890 5 SK-Custom 5 Easter Sunday 5 5 SK-590 5 5 5 5 41. 5 SK-PDD 5 6 Twelfth Day 6 SK-590 6 SK-Custom 6 Easter Monday 15. 6 6 6 28. 6 6 6 6 6 7 7 7 7 7 7 7 7 7 37. 7 7 7 50. 8 8 8 8 8 8 24. 8 8 8 8 8 8 9 9 7. 9 11. 9 9 9 9 9 9 9 9 46. 9 10 10 10 10 10 10 10 10 33. 10 10 10 10 11 11 11 11 11 SK-Custom 20. 11 11 11 SK-AC10 11 11 11 11 12 3. 12 12 12 12 SK-Custom 12 12 12 SK-AC30 12 12 42. 12 12 13 13 13 13 16. 13 SK-Custom 13 13 SK-Custom 29. 13 SK-890 13 13 13 13 14 14 14 14 SK-AC10 14 SK-Custom 14 14 SK-Custom 14 SK-590 14 SK-Custom 38. 14 14 14 51. 15 15 15 15 SK-AC30 15 SK-Custom 15 25. 15 SK-Custom 15 15 SK-Custom 15 15 15 16 16 Rosenmontag8. 16 12. 16 SK-890 16 16 16 SK-Custom 16 16 SK-Custom 16 16 SK-Custom 47. 16 17 17 SK-PDD 17 SK-AC10 17 SK-590 17 17 17 SK-Custom 17 34. 17 SK-Custom 17 17 SK-Custom 17 18 18 SK-PDD 18 SK-AC30 18 18 21. 18 18 18 18 SK-Custom 18 18 SK-Custom 18 19 4. 19 SK-PDD 19 SK-890 19 19 19 19 19 19 19 43. 19 SK-Custom 19 20 20 20 SK-590 20 17. 20 20 20 30. 20 20 20 20 SK-Custom 20 21 21 21 21 21 21 21 21 21 39. 21 21 21 52. 22 22 22 22 22 22 26. 22 22 22 22 22 22 23 23 9. 23 13. 23 23 Whit Sunday 23 23 23 23 23 23 48. 23 24 24 24 24 24 Whit Monday 24 24 24 35. 24 24 24 24 25 25 25 25 25 22. 25 25 25 25 25 25 25 1. Christmas Day 26 5. 26 26 26 26 26 26 26 26 26 44. 26 26 2. Christmas Day 27 27 27 27 18. 27 27 27 31. 27 27 27 27 27 28 28 28 28 SK-PDD 28 28 28 SK-PDD 28 28 40. 28 28 28 01. 29 29 29 SK-PDD 29 29 27. 29 SK-PDD 29 29 SK-AC10 29 29 29 30 30 14. 30 SK-PDD 30 30 30 SK-PDD 30 30 SK-AC30 30 30 49. 30 31 31 31 31 31 31 31 New Year's Eve SK-AC10 AC Drives SK-890 Modular system drives SK-AC30V For the Control of Pump, Fan and General Purpose Applications SK-590 DC drives - Integrator Series SK-AC30 PDD Codesys function using Parker Drive Development tool SK-Custom Customized Training 7
SK-PAC New PAC Controller Project managers and programmers of electric machines and plants Knowledge in PLC, IEC 61131-3, PC or Embedded Systems programming Participation in the SK-T11 SK-T30 and SK-T40 seminars Presentation of the PAC Controller System EtherCAT Bus System Basics and Settings Presentation of the CODESYS Programming Software V3 SoftMotion (Point to point movements, axis synchronization) Integration of external components (servo drives, I/O components) Practical programming exercises in accordance with IEC 61131-3 This training will enable you to specify and create projects with the PAC Controller 995.00 2+1/2 days Training in Offenburg SK-PAC-1: March 04 th to 06 th 2015 German SK-PAC-2: April 22 nd to 24 th 2015 English SK-PAC-3: June 17 th to 19 th 2015 German SK-PAC-4: July 08 th to 10 th 2015 English SK-PAC-5: September 16 th to 18 th 2015 German SK-PAC-6: October 14 th to 16 th 2015 English Training in Milan SK-PAC: March 04 th to 05 th 2015 English/Italian SK-PAC: May 26 th to 27 th 2015 English/Italian SK-PAC: September 16 th to 17 th 2015 English/Italian SK-PAC: November 11 th to 12 th 2015 English/Italian
SK-PSD Seminar Brochure 2015 New Parker Servo Drive - PSD Project managers Service, technicians Basic technical training Presentation of the PSD device technology, multi-axes technology / single axis technology Safety technology according to EN ISO 13849-1 Introduction to the Parker Automation Manager PAM with focus to drive configuration Setting up Ethercat communication Commissioning of axes with practical examples Controller optimization and error diagnostics with practical examples Familiarization with the Parker Servo Drive Family PSD Successful setup of the PSD Communication with the control 300.00 1 day - 8:30 to 16:30 o clock Training in Offenburg SK-PSD-1: March 03 rd 2015 German SK-PSD-2: April 21 st 2015 English SK-PSD-3: June 16 th 2015 German SK-PSD-4: July 07 th 2015 English SK-PSD-5: September 15 th 2015 German SK-PSD-6: October 13 th 2015 English Training in Milan SK-PSD: April 09 th 2015 English/Italian SK-PSD: June 03 rd 2015 English/Italian SK-PSD: October 02 nd 2015 English/Italian
SK-T11 Introduction to the Compax3 Device Technology Project managers, design engineers, programmers and commissioners of electric machines and plants Maintenance and service personnel Parker employees (technical office and field) Basic technical training and knowledge or practical experience in this technology Presentation of Compax3 S/H/M device technology Safety technology in accordance with EN ISO 13849-1 Configuration of technology function T11 Presentation of the user software Setup / diagnosis of an axis Error shooting / optimization Practical training Familiarization with the Compax3 device technology Successful setup of the Compax3 free of charge 1 day Training in Offenburg SK-T11-37: January 20 th 2015 German SK-T11-38: March 17 th 2015 English SK-T11-39: May 19 th 2015 German SK-T11-41: October 27 th 2015 German SK-T11-42: November 24 th 2015 English 10
SK-T30 Seminar Brochure 2015 Programming in Accordance with - IEC 61131-3 Programmers, project managers and users of electric machines and systems Parker employees (technical office and field) Participation in the SK-T11 seminar (advisable) Knowledge in PLC, IEC 61131-3, PC or Embedded Systems programming Basic knowledge in higher programming languages Presentation of the Compax3 T30 device technology PLCopen- / IEC- /C3 function modules Presentation of the CoDeSys Software Program debugging Practical programming exercise Teaching knowledge to develop programs with the CoDeSys programming system Familiarization with the individual function modules Creation and integration of a CoDeSys project 100.00 1 day Training in Offenburg SK-T30-37: January 21 st 2015 German SK-T30-38: March 18 th 2015 English SK-T30-39: May 20 th 2015 German SK-T30-41: October 28 th 2015 German SK-T30-42: November 25 th 2015 English 11
SK-T40 C3 T40 Technology Function»Electronic Cam«Project managers, design engineers and programmers of electric machines and plants Parker employees (technical office and field) Participation in the SK-T11 and SK-T30 seminars Knowledge in PLC, IEC 61131, PC or Embedded Systems programming Basic knowledge in higher programming languages Presentation of the Compax3 T40 device technology Basics, terms and dimensioning T40 PLCopen- / IEC- /C3 function modules CamDesigner Software HEDA motion bus for axis synchronous systems Cam switching mechanism, virtual master Practical programming exercise Familiarization with the T40 function modules Creation of a curve in the CamDesigner Design of an axis synchronous drive unit 200.00 2 days Training in Offenburg SK-T40-39: May 21 st to 22 nd 2015 German SK-T40-42 November 26 th to 27 th 2015 English 12
SK-SSA Seminar Brochure 2015 Compax3 Controller Optimization ServoSignalAnalyzer Project managers, design engineers and commissioners of electric machines and plants Maintenance and service personnel Parker employees (technical office and field) Participation in the SK-T11 training and knowledge or practical experience in this technology Basic knowledge of control technology Presentation of the control loops Automatic controller design Optimized response Presentation of the ServoSignalAnalyzer Signal analysis in the time range Signal analysis in the frequency range Setting Notch filters Practical training Analysis and optimization of the mechanic / controlled system 100.00 1 day Training in Offenburg (on request) 13
SK-Com C3 Communication Project managers, design engineers and programmers of electric machines and plants Parker employees (technical office and field) Participation in the SK-T11 SK-T30 and SK-T40 seminars Knowledge in PLC, IEC 61131-3, PC or Embedded Systems programming Basic knowledge in higher programming languages Communication principles RS485, Profibus, ProfiNet, CANopen, DeviceNet, Ethernet Powerlink, EtherCAT Basics, terms and system integration Operation via Profibus (Profidrive) and ProfiNet Sample solutions with S7 PLC Sample solutions with PAC controller (EtherCAT) Familiarization with the individual methods of communication Connection of Compax3 to an external controller 100.00 1 day Training in Offenburg (on request) 14
SK-XL Seminar Brochure 2015 Introduction to the Device Technology of SLVD -N, TPD-M, Motornet DC, ServoNet Project managers, design engineers, programmers and commissioners of electric machines and plants Maintenance and service personnel Parker employees (technical office and field) Basic technical training and knowledge or practical experience in this technology Presentation of SLVD-N device technology Presentation of TPD-M device technology Presentation of Motornet DC / ServoNet Configuration of a SLVD-N axis Operating software Familiarization with the different device technologies Configuration of the individual devices free of charge 1 day Training in Offenburg (on request) 15
SK-LD / SK-Linear Actuator Linear Drive Technology /Direct Drive Technology, Precision Technology Project managers, design engineers and commissioners of electric machines and plants Maintenance and service personnel Parker employees (technical office and field) Basic technical training. Basics of linear drive technology, precision technology Dimensioning of toothed belt units and spindle units Lifetime calculation Product presentation: LCB, HLE, HPLA, ETH, ETT, LXR family, MX family Mounting / setting and service Basics of direct drive technology EL-Sizing tool, DimAxes Application Examples Familiarization with different linear drive technologies Familiarization with the possibilities of usage Which product is suitable for which application? free of charge 1 day Training in Offenburg (SK-LD) SK-LD-37: January 22 nd 2015 German SK-LD-38: March 19 th 2015 English SK-LD-41: October 29 th 2014 German Training in Milan (SK-Linear Actuator) SK-Linear Actuators: February 19 th 2015 English/Italian SK-Linear Actuators: May 21 st 2015 English/Italian SK-Linear Actuators: September 23 rd 2015 English/Italian 16
SK-ETH Seminar Brochure 2015 New High Force Electro Thrust Cylinder - ETH Project managers, design engineers. Technicians Sales (technical indoor service and technical field service) Basic technical training. Product Presentation of Electro Thurst Cylinder ETH Working with the product catalogue Sizing incl. lifetime calculation, EL-Sizing-Tool ATEX Basics, Dimensioning ETH in ATEX Design incl. EX-Motor Presentation of the application. Familiarization with the Electro Thrust Cylinder ETH Familiarization with the possibilities of usage ETH in ATEX design Configure ETH Cylinders according to the application 100.00 1 day - 8:30 to 16:00 o clock Training in Offenburg (SK-ETH) SK-ETH: April 15 th 2015 German SK-ETH: October 07 th 2015 English 17
SK-SERVOsoft Practice-oriented Dimensioning of Parker Servo Drive Systems Electronics and mechanics project managers and engineers for electrical machines and systems as well as Parker employees (technical sales representatives as well as sales assistants) who are involved in dimensioning servo drives Technical training and/or practical experience in the dimensioning of servo drives Introduction to the SERVOsoft dimensioning tool promotion version Design of a drive train Layout of a motion profile Selection of gearbox/motor/controller Methods of analysis / determination of energy costs This training deals with the optimized dimensioning of servo drive systems (electrical and mechanical) Use of the dimensioning tool Identifying opportunities for drive optimization Analysis / examination of energy costs Teaching and learning aids Free license for the use of the Parker SERVOsoft Promotion Version on your computer/laptop. 100.00 1 day Training in Offenburg (on request) 18
SK-Safety Seminar Brochure 2015 Introduction to Safety Technology Parker employees (technical office and field) Project managers and programmers of electric machines and plants for safety relevant aspects Participation in the SK-T11 and SK-T30 seminars (advisable) Basic knowledge of control technology Basics, Directives and Standards of machine safety Risk analysis and assessment for machines EN ISO 13849-1 terms: Performance Level PL, CCF, MTTF, Presentation of the individual safety functions such as STO, SS1, SLS, etc. Circuitry and programming examples for the relevant safety functions 100.00 1 day Training in Offenburg (on request) 19
SK-Workshops Workshop 1: Force Control Workshop 2: Cut on Fly Project managers and programmers who have to create a drive solution within a short period of time Knowledge in controller, IEC 61131-3, PC or Embedded Systems programming Participation in the SK-T11 SK-T30 or SK-T40 seminars From the task to the specification sheet and the target specification Presentation of the relevant application Sample programs / templates Practical programming exercise on test setups 100.00 1 day Training in Offenburg (on request) 20
SK-SLVD-N Seminar Brochure 2015 Compact Servo Drive Project managers, design engineers and programmers and commissioners of electric machines and plants. Maintenance and service personnel Parker employees (technical office and field) Basic knowledge in control technology. Presentation of servo products Servo drives running basic principles Operating mode Installation and use of MotionWiz software Configuration of drives Example applications Basic knowledge to program the drive in simple applications. 100.00 1 day Training in Milan SK-SLVD-N: February 05 th 2015 Italian/English SK-SLVD-N: May 12 th 2015 Italian/English SK-SLVD-N: October 15 th 2015 Italian/English 21
SK-TPD-M Triple Axis Servo Drive Project managers, design engineers and programmers and commissioners of electric machines and plants. Maintenance and service personnel Parker employees (technical office and field) Basic knowledge in control technology. Presentation of servo products Servo drives running basic principles Operating mode Installation and use of MotionWiz software Configuration of drives Example applications Basic knowledge to program the drive in simple applications. 100.00 1 day Training in Milan (on request) 22
SK-Motornet DC Seminar Brochure 2015 Motornet DC Project managers, design engineers and programmers and commissioners of electric machines and plants. Maintenance and service personnel Parker employees (technical office and field) Basic knowledge in control technology. Presentation of the servo motor with integrated servo drive Motornet DC running basic principles Operating mode Installation and use of MotionWiz software Configuration of Motornet DC Example applications Basic knowledge to program the drive in simple applications. on application 1 day Training in Milan SK-Motornet DC: February 12 th 2015 Italian/English SK-Motornet DC: May 19 th 2015 Italian/English SK-Motornet DC: September 15 th 2015 Italian/English 23
SK-Hi-Drive Flexible Servo Drive Project managers, design engineers and programmers and commissioners of electric machines and plants. Maintenance and service personnel Parker employees (technical office and field) Basic knowledge in control technology. Presentation of servo products Servo drives running basic principles Operating mode Installation and use of MotionWiz software Configuration of drives Example applications Basic knowledge to program the drive in simple applications. 100.00 1 day Training in Milan SK-Hi-Drive: January 15 th 2015 Italian/English SK-Hi-Drive: May 13 th 2015 Italian/English SK-Hi-Drive: September 10 th 2015 Italian/English 24
SK-TWIN-N/SPD-N Seminar Brochure 2015 Servo Drives Project managers, design engineers and programmers and commissioners of electric machines and plants. Maintenance and service personnel Parker employees (technical office and field) Basic knowledge in control technology. Presentation of servo products Servo drives running basic principles Operating mode Installation and use of MotionWiz software Configuration of drives Example applications Basic knowledge to program the drive in simple applications. 100.00 1 day Training in Milan (on request) 25
SK-AC10 AC Drives Distributors, Electrical and Maintenance Engineers, OEM and System Integration Engineers, Plant and Maintenance Managers. Product description Parker SSD Drives range of inverter products are designed to provide users with exceptional levels of speed and torque control for a wide range of industries, from simple fan and pump control through to the most demanding of highperformance applications. These drives are supported by an extensive range of hardware options and software tools to help end-users, OEMs and system integrators achieve the best possible results from their investment. There are no formal entry requirements for this course but it is assumed that all delegates are technically competent and are suitably qualified to install, operate, commission and maintain Parker SSD Drives inverters and related products. Over the duration of the course, delegates will develop their knowledge of Parker SSD Drives inverter products through formal instruction, group discussion and practical exercises. Topics include: Introduction to AC motors and drives Theory of operation Options and product codes Practical commissioning Software tools Key industry segments and example system applications The purpose of this course is to provide a technical introduction to Parker SSD Drives inverter products and to develop a good understanding of their use and capabilities. on application 1 day (can be booked separately) Training in Littlehampton SK-AC10: February 03 rd 2015 English SK-AC10: March 17 th 2015 English SK-AC10: April 14 th 2015 English SK-AC10: June 02 nd 2015 English SK-AC10: August 11 th 2015 English SK-AC10: September 29 th 2015 English SK-AC10: December 01 st 2015 English 26
SK-AC30V For the Control of Pump, Fan and General Purpose Applications Distributors, Electrical and Maintenance Engineers, OEM and System Integration Engineers, Plant and Maintenance Managers. Product description The AC30V industrial drive has been specifically designed to provide users with exceptional levels of control for pumps, fans and general purpose applications. Its flexible and highly modular construction enables a wide range of communications and I/O modules to be easily added as required. The range is supported by the Parker Drive Quick Tool which is designed to guide users through drive configuration and commissioning and uses industry specific terminology in order to provide clear and meaningful terms of reference. There are no formal entry requirements for this course but it is assumed that all delegates are technically competent and are suitably qualified to install, operate, commission and maintain AC30V series drives and related products. Over the duration of the course, delegates will develop their knowledge of AC30V series products through formal instruction, group discussion and practical exercises. Topics include. Topics include: Basic AC motor theory Basic drive theory Drive options and product codes Drive software tool Practical commissioning Key industry segments and example system applications The purpose of this course is to provide a technical introduction to AC30V series drives and to develop a good understanding of the fundamentals of drive applications development. on application 1 day (can be booked separately) Training in Littlehampton SK-AC30V: February 04 th 2015 English SK-AC30V: March 18 th 2015 English SK-AC30V: April 15 th 2015 English SK-AC30V: June 03 rd 2015 English SK-AC30V: August 12 th 2015 English SK-AC30V: September 30 th 2015 English SK-AC30V: December 02 nd 2015 English 27
SK-AC30 PDD Codesys function using Parker Drive Development tool System and Project Engineers looking to develop advanced drive applications. Product description The AC30V industrial drive has been specifically designed to provide users with exceptional levels of control for pumps, fans and general purpose applications. Its flexible and highly modular construction enables a wide range of communications and I/O modules to be easily added as required. The range is supported by the Parker Drive Quick Tool which is designed to guide users through drive configuration and commissioning and uses industry specific terminology in order to provide clear and meaningful terms of reference. Candidates should be familiar with drives and their application and have a knowledge of basic drive programming. Over the duration of the course delegates will develop their knowledge of the Parker Drive Designer (PDD) Codesys based programming language. Topics included Overview of AC30 drive Introduction to PDD Available standard blocks Configuring drive projects Advanced techniques Practical examples The purpose of this course is to provide an advanced course focusing on using Codesys function blocks for use in custom configurations. on application 2+1/2 days Training in Littlehampton SK-AC30 PDD: February 17 th to 19 th 2015 English SK-AC30 PDD: April 28 th to 30 th 2015 English SK-AC30 PDD: July 28 th to 30 th 2015 English SK-AC30 PDD: November 03 rd to 05 th 2015 English 28
SK-AC890 Modular Systems Drive Electrical and Maintenance Engineers, OEM and System Integration Engineers, Plant and Maintenance Managers. Product description The AC890 series of inverter drives are high-performance AC motor controllers, available in a wide range of power ratings and capable of operating in five distinct modes; V/Hz, sensorless vector, closed-loop vector, servo (PMAC) and active front-end (AFE). The same control architecture is utilized throughout the range which allows the use of common communications and speed feedback options for all drive ratings. The entire range is supported by the DSE software tool for drive configuration, applications development and in-system commissioning. There are no formal entry requirements for this course but it is assumed that all delegates are technically competent and are suitably qualified to install, operate, commission and maintain AC890 series drives and related products.. Over the duration of the course, delegates will develop their knowledge of AC890 series products through formal instruction, group discussion and practical exercises. Topics include. Topics include: Basic AC motor theory Basic inverter drive theory Drive options and product codes Practical drive commissioning V/Hz, SV and Closed Loop Vector Practical drive commissioning PMAC (Optional) Drive functional block diagram Practical applications development (single drive system) Peer to peer drive networks and communications Practical applications development (multiple drive system) Active front-end (AFE) energy recovery and grid tie applications Key industry segments and example system applications The purpose of this course is to provide a technical introduction to AC890 series drives and to develop a good understanding of the fundamentals of drive applications development. on application 2 days (can be booked separately) Training in Littlehampton SK-AC890: February 05 th 2015 English SK-AC890: March 19 th 2015 English SK-AC890: April 16 th 2015 English SK-AC890: June 04 th 2015 English SK-AC890: August 13 th 2015 English SK-AC890: October 01 st 2015 English SK-AC890: December 03 rd 2015 English 29
SK-DC Drives DC Drives - Integrator Series Electrical and Maintenance Engineers, OEM and System Integration Engineers, Plant and Maintenance Managers. Product description The 590P series of converter drives are high-performance DC motor controllers, available in a wide range of power stack ratings from 15A to 2700A. The same control architecture is utilized throughout the range which allows the use of common communications and speed feedback options for all drive ratings. The entire range is supported by the DSELite software tool for drive configuration, applications development and in-system commissioning.. There are no formal entry requirements for this course but it is assumed that all delegates are technically competent and are suitably qualified to install, operate, commission and maintain 590P series drives and related products. Over the duration of the course, delegates will develop their knowledge of 590P series products through formal instruction, group discussion and practical exercises. Topics include: Basic DC motor theory Basic DC drive theory Drive options and product codes Practical drive commissioning Drive functional block diagram DSELite software tool Practical applications development Key industry segments and example system applications The purpose of this course is to provide a technical introduction to 590P series drives and to develop a good understanding of the fundamentals of drive applications development. on application 1 day (can be booked separately) Training in Littlehampton SK-DC Drives: February 06 th 2015 English SK-DC Drives: March 20 th 2015 English SK-DC Drives: April 17 th 2015 English SK-DC Drives: June 05 th 2015 English SK-DC Drives: August 14 th 2015 English SK-DC Drives: October 02 nd 2015 English SK-DC Drives: December 04 th 2015 English 30
SK-TS8000 Human Machine Interface (HMI) Touchscreens Distributors, Electrical and Maintenance Engineers, OEM and System Integration Engineers, Plant and Maintenance Managers. Product description The TS8000 is a family of web-enabled graphical HMIs designed to provide a user-friendly interface to complex machine control applications. Several common communications interfaces are included as standard; including RS232, RS485 and Ethernet along with many more supported by optional add-in cards. The complete range is supported by our free DSI programming tool, a simple yet comprehensive application development environment. There are no formal entry requirements for this course but it is assumed that all delegates are technically competent and are suitably qualified to install, operate, commission and maintain TS8000 series HMIs and related products. Over the duration of the course, delegates will develop their knowledge of TS8000 series products through formal instruction, group discussion and practical exercises. Topics include. Topics include: Basic HMI principles Options and product codes DSI software tool Communicating with drives Remote system control over the internet Key industry segments and example system applications The purpose of this course is to provide a technical introduction to the TS8000 series of HMI products and to develop a good understanding of the fundamentals of applications development. on application -- Training in Littlehampton (on request) 31
SK-Custom Customized Training Distributors, Electrical and Maintenance Engineers, OEM and System Integration Engineers, Plant and Maintenance Managers. Product description Parker SSD Drives range of AC and DC motors was designed to provide users with exceptional levels of speed and torque control for a wide range of industries, from simple speed control through to the most demanding of highperformance applications. These drives are supported by an extensive range of hardware options and software tools to help end-users, OEMs and system integrators achieve the best possible results from their investment. There are no formal entry requirements for this courses but it is assumed that all delegates are technically competent and are suitably qualified to install, operate, commission and maintain Parker SSD Drives AC and DC Drives and related products. Limitations Due to the highly specific nature of these courses, we are only able to provide customized courses by prior arrangement and for groups of 4 8 delegates. Please contact your local sales company for further information. Over the duration of the course, delegates will develop their knowledge of Parker SSD Drives products through formal instruction, group discussion and practical exercises. Introduction to AC motors and drives Introduction to AC motors and drives Theory of operation Practical commissioning Software tools Applications development Communications HMI products The purpose of these courses is to provide delegates with a customized learning experience, tailored to suit their exact requirements. on application 1-5 days (can be booked separately) Training in Littlehampton (upon request) SK-Custom: March 02 nd to 06 th 2015 English SK-Custom: May 11 th to 15 th 2015 English SK-Custom: July 13 th to 17 th 2015 English SK-Custom: September 14 th to 18 th 2015 English SK-Custom: November 16 th to 20 th 2015 English 32
Training in Dijon SK-CMS - Customized Motors Solution Parker Sales Engineer, Product manager, Technical support, Goto person, Distributor, OEMs Products overview, Special motor adaptation, motors application, High speed motors, Specific OEM project Over the duration of the course, delegates will develop their knowledge of technical and electrical data for customized servomotors. During the course will be showed some successfully applications stories. on application 1 days Training in Dijon (on request) 33
Registration We shall be pleased to receive your registration per mail or online on www.parker-eme.com/training. For Offenburg: ekraus@parker.com For Milan: manuel.finotto@parker.com For Littlehampton: Ted.Soukal@parker.com For Dijon: odelor@parker.com Terms of Registration and Entry Fees The seminar fee plus VAT per participant is listed in the respective category. If two or more persons from the same company participate, the fee for the second and any further person is reduced by 25%. Parker Hannifin offer the possibility, to hold the seminars at your premises. The following fees are charged: We offer an»on-site«training and students rebate (on request) The seminar fee comprises: Provision of seminar documentation Special practical exercises Participation certificate / bonus offer Coffee, soft drinks Lunch Registration Timely registration ensures your participation! The number of participants is limited to 8 persons per seminar. Please use our registration form on the following page. You may also register online on our homepage under: www.parker-eme.com/training Your registration will be confirmed immediately. Cancelation Cancelation by the participants are free of charge up to three weeks before the beginning of the seminar, after that, 50% of the seminar fee must be paid. As an alternative, you may name a replacement. Copyright The copying of the seminar documentation is not allowed unless explicitly permitted by Parker Hannifin GmbH. The copying of the seminar documentation and the usage or disclosure to third persons is not allowed unless explicitly permitted. Liability Parker Hannifin reserve the right to cancel seminars even after confirmation in the event of under subscription or other relevant reasons. An alternative date will then be offered. Parker Hannifin does not accept any further liability for the information communicated during the seminar for resulting damages or consequential damages Please Observe! The participants commit themselves to respect the valid safety instructions of Parker Hannifin. Seminar times Monday - Thursday 08:30-17:00 Friday until 13:00 34
Starter Kits Seminar Brochure 2015 In order to familiarize with these products, for trainings as well as for testing application software, we offer our Compax3 training units. Due to its compact design and its small dimensions, the device can be easily transported and is immediately ready for operation thanks to the direct mains connection of 1 x 230VAC. Model Description 981-500043 Compax3 Starter kit T40 Pop12 This Starter Kit consists of the following components: C3S025V2F10I21T40M10 + SMH60 Servo motor + Pop12 + Encoder + Cables, Software Package + Complete Installation 981-500047 C3 powerplmc Starter Kit This Starter Kit consists of the following components: C3 powerplmc + C3 Servo drive + SMH60 Servomotor + Parker I/O System PIO + Cables Software Package + Complete Installation 981-500050 C3powerPLmC-E20 Starter Kit This Starter Kit consists of the following components: C3 powerplmc-e20' Stand-alone Machine Controller with user I/O Interface + Cables Parker PIO' CANopen System, with 8 Digital Input / 8 Digital Output Channels Software Package + Complete Installation DEMOKITSLVD1N SLVD-N Demonstrator This Starter Kit consists of the following components: SLVD1N Servo Drive with integral pico-plc, SMB servo motor User I/O Interface + Cables, Software Package + Complete Installation 35
Model Description 783-300077 Compax3 I/O Box This Starter Kit is for use with the following: Application: Technology Function I12 T11 for M10 and M12 (X22) 783-300076 Compax3 I/O Box This Starter Kit is for use with the following: Application: I/O Simulation for all Compax3 (X12) plus Enable Input 981-200019 Compax3 I/O Box This Starter Kit is for use with the following: Application: Technology Function I10T10, T30, T40: Analog Input Simulation plus 2 BNC Connectors for D/A Monitoring PIO-KIT347 PIO CANopen Starter kit This Starter Kit consists of the following components: PIO-347 CANopen Economy Fieldbus Coupler PIO-602 Feeding terminal PIO-402 4 Channel Digital Input Terminal PIO-504 4 Channel Digital Output Terminal PIO-600 End terminal PIO-501 Labels 0122.800 ETH050 + C3 + CTC This Starter Kit consists of the following components: Cutaway Model ETH050M10K1K1BFMN0100AUAA Servo Motor SMH60601,45112IB654 Servo Drive C3S025V2F10I20T40M10 CTC-Panel XPR06VT-2P3 Cables between each module External Interface Ethernet Anschluss for CTC C3 complete accessible + RS232 Cable to PC Software for Compax3 => C3-Servo-manager + Docu for CTC-Panel => Interact Xpress Manager Profile Examples ETH032 + ETH050 + ETH080 sack barrow for transportation 36
EME Value Added Services Start-Up/Commissioning & Programming Services Parker EME offers a range of on-site and in-house start-up/commissioning and programming services. Nature of Service Nature of Service Start-Up and Commissioning Parker EME's start-up & commissioning services provide you with access to the people and knowledge to ensure fast, safe and efficient installation of your electromechanical equipment. Parker understands that proper start-up & commissioning are vital to the long-term health of your automation system, with improper installation & commissioning being the leading cause of premature failure. As the manufacturer we are uniquely positioned to perform this task - with the resources to address any concerns or issues that arise and the expertise to undertake any troubleshooting and problem-solving activities. IEC61131 Application Programming Parker EME's IEC61131 programming service provides the OEM or machine builder with the option to 'out-source' their motion control software engineering requirements to an industrial partner they know they can trust to provide a confidential, efficient and cost effective service. Our services range from the modification of an existing IEC61131 system program, to the complete development of a new motion or process control application software, from an agreed specification through to release. Nature of Service IEC61131 PLC-Function Block Programming In addition to our general IEC61131 programming services, Parker EME is also able to offer a PLC function block programming service, for example to implement the communications interface for various fieldbus systems. Nature of Service Nature of Service Machine Optimization Parker EME's "machine optimization" service provides maximum throughput & performance from your automation system, without compromising reliability. Vibration analysis and mechanical dynamic behavior measurements permit us to optimize the overall mechanical bandwidth of your system, using notch filtering to eliminate the effects of any mechanical resonance frequencies and suppressing specific disturbances at any resonance points. Analysis & optimization of the control loops ensures tracking errors are minimized while stiffness & dynamic response are maximized, providing a smooth, stable, responsive system. Electronic CAM Design The use of Parker EME's servo drive technology to electronically simulate mechanical CAM and CAM switching mechanisms offers considerable time- and cost-saving advantages. To support this, Parker EME is able to offer a CAM design service - taking the customer supplied CAM profile drawing, Parker is able to model this CAM profile and then create the equivalent electronic CAM 'curve table' data for use in Parker servo drives. 37
Parker Worldwide Europe, Middle East, Africa AE United Arab Emirates, Dubai Tel: +971 4 8127100 parker.me@parker.com AT Austria, Wiener Neustadt Tel: +43 (0)2622 23501-0 parker.austria@parker.com AT Eastern Europe, Wiener Neustadt Tel: +43 (0)2622 23501 900 parker.easteurope@parker.com AZ Azerbaijan, Baku Tel: +994 50 2233 458 parker.azerbaijan@parker.com BE/LU Belgium, Nivelles Tel: +32 (0)67 280 900 parker.belgium@parker.com BG Bulgaria, S o fi a Tel: +359 2 980 1344 parker.bulgaria@parker.com BY Belarus, Minsk Tel: +48 (0)22 573 24 00 parker.poland@parker.com CH Switzerland, Etoy Tel: +41 (0)21 821 87 00 parker.switzerland@parker.com CZ Czech Republic, Klecany Tel: +420 284 083 111 parker.czechrepublic@parker.com DE Germany, Kaarst Tel: +49 (0)2131 4016 0 parker.germany@parker.com DK Denmark, Ballerup Tel: +45 43 56 04 00 parker.denmark@parker.com ES Spain, Madrid Tel: +34 902 330 001 parker.spain@parker.com FI Finland, Vantaa Tel: +358 (0)20 753 2500 parker.finland@parker.com FR France, Contamine s/arve Tel: +33 (0)4 50 25 80 25 parker.france@parker.com GR Greece, Athens Tel: +30 210 933 6450 parker.greece@parker.com HU Hungary, Budaörs Tel: +36 23 885 470 parker.hungary@parker.com IE Ireland, Dublin Tel: +353 (0)1 466 6370 parker.ireland@parker.com IT Italy, Corsico (MI) Tel: +39 02 45 19 21 parker.italy@parker.com KZ Kazakhstan, Almaty Tel: +7 7273 561 000 parker.easteurope@parker.com NL The Netherlands, Oldenzaal Tel: +31 (0)541 585 000 parker.nl@parker.com NO Norway, Asker Tel: +47 66 75 34 00 parker.norway@parker.com PL Poland, Warsaw Tel: +48 (0)22 573 24 00 parker.poland@parker.com PT Portugal, Leca da Palmeira Tel: +351 22 999 7360 parker.portugal@parker.com RO Romania, Bucharest Tel: +40 21 252 1382 parker.romania@parker.com RU Russia, Moscow Tel: +7 495 645-2156 parker.russia@parker.com SE Sweden, Spånga Tel: +46 (0)8 59 79 50 00 parker.sweden@parker.com SK Slovakia, Banská Bystrica Tel: +421 484 162 252 parker.slovakia@parker.com SL Slovenia, Novo Mesto Tel: +386 7 337 6650 parker.slovenia@parker.com TR Turkey, Istanbul Tel: +90 216 4997081 parker.turkey@parker.com UA Ukraine, Kiev Tel: +48 (0)22 573 24 00 parker.poland@parker.com UK United Kingdom, Warwick Tel: +44 (0)1926 317 878 parker.uk@parker.com ZA South Africa, Kempton Park Tel: +27 (0)11 961 0700 parker.southafrica@parker.com North America CA Canada, Milton, Ontario Tel: +1 905 693 3000 US USA, Cleveland Tel: +1 216 896 3000 A s i ap a c i fi c AU Australia, Castle Hill Tel: +61 (0)2-9634 7777 CN China, Shanghai Tel: +86 21 2899 5000 HK Hong Kong Tel: +852 2428 8008 IN India, Mumbai Tel: +91 22 6513 7081-85 JP Japan, Tokyo Tel: +81 (0)3 6408 3901 KR South Korea, Seoul Tel: +82 2 559 0400 MY Malaysia, Shah Alam Tel: +60 3 7849 0800 NZ New Zealand, Mt Wellington Tel: +64 9 574 1744 SG Singapore Tel: +65 6887 6300 TH Thailand, Bangkok Tel: +662 186 7000 TW Taiwan, Taipei Tel: +886 2 2298 8987 South America AR Argentina, Buenos Aires Tel: +54 3327 44 4129 BR Brazil, Sao Jose dos Campos Tel: +55 800 727 5374 CL Chile, Santiago Tel: +56 2 623 1216 MX Mexico, Toluca Tel: +52 72 2275 4200 We reserve the right to make technical changes. The data correspond to the technical state at the time of printing. 2015 Parker Hannifin Corporation. All rights reserved. EMEA Product Information Centre Free phone: 00 800 27 27 5374 (from AT, BE, CH, CZ, DE, DK, EE, ES, FI, FR, IE, IL, IS, IT, LU, MT, NL, NO, PL, PT, RU, SE, SK, UK, ZA) US Product Information Centre Toll-free number: 1-800-27 27 537 www.parker.com 192-493002N4 March 2015 Your local authorized Parker distributor