Low Level Order Picker with tiller arm 2.0 tonnes OPB20T
1.1 1.2 1.3 1.4 1.5 1.6 1.8 1.9 2.1 2.2 2.3 3.1 3.2 3.3 3.4 3.5 3.6 3.7 4.4 4.9 4.15 4.19 4.21 4.22 4.25 4.32 4.33 4.34 4.35 5.1 5.2 5.3 5.7 5.10 6.1 6.2 6.4 6.5 8.1 Characteristics Manufacturer Model Power source (Electric, Diesel, Petrol, Gas) Operating mode (pedestrian, stand-on, sit-on) Nominal capacity / load Load centre Load wheel axle to fork face (forks lowered) Wheelbase (forks lowered) Weights Truck weight (with nominal load & battery) Axle loadings (with nominal load & battery), drive/load side Axle loadings (without load & with battery), drive/load side Wheels & Tyres Tyres (R- rubber / Vul- vulkollan), drive/load side Load wheel dimensions (diameter x width) Drive wheel dimensions (diameter x width) Castor wheel dimensions (diameter & width) No. of wheels (x = driven), drive/load side Track width (centre of tyres), load side Track width (centre of tyres), drive side Dimensions Lift (see tables) Height of tiller arm in travel position (min./max.) Fork height, fully lowered Overall length Chassis (overall width) Fork dimensions (thickness / width / length) Outside width over forks (minimum/maximum) Ground clearance @ centre of wheelbase (forks lowered) Working aisle width (Ast3) 1000 x 1200 mm load, lengthwise Working aisle width (Ast3) 800 x 1200 mm load, lengthwise Turning radius (forks lowered) Performance Travel speed, laden / unladen Lifting speed, laden / unladen Lowering speed, laden / unladen Gradeability, laden/unladen Service brake (mechanical, hydraulic, electric) Motors Drive motor (S2 60 min) Lift motor (S3 15 %) Battery voltage / capacity (5 hr. rating) Battery weight Miscellaneous Speed control type Q c x y b10 b11 h3 h14 h13 l1 b1/b2 s/e/l b5 m2 Ast3 Ast3 Wa () km/h m/s m/s % (kw) (kw) (V/Ah) () Mitsubishi OPB20T Electric Stand-on 2000 600 963 1933 2835 930/1905 710/125 Vul/Vul 85x75 230x70 150x50 2+1x/4 385 564 115 840/1240 85 2330 790 60/165/1150 550 25 2397 2597 2160 7.8/10 0.03/0.04 0.06/0.03 10/15 Electric 2.0 0,8 (15%) 24/240-375 205-300 Stepless Ast = Wa + R + a Ast = Cross aisle width Wa = Turning radius a = Safety clearance = 2 x 100 mm R = (l6 + x) 2 + ( b12 / 2) 2 The ergonomic tiller arm allows a choice between walk-beside and ride-on modes, for greater versatility and efficiency. R R Stability is enhanced by tandem load wheels. Drive wheel pressure is optimised by a patented loadsensing device - for improved traction. Spacious, step-through cabin allows easy entry and exit.
Developed for outstanding performance, the award-winning* range of Mitsubishi forklift trucks and warehouse equipment is built to a higher specification to maximise productivity and ensure utter reliability whatever the application. It s what you d expect from one of the world s largest corporations whose companies are at the leading edge of technologies where performance, quality and dependability can never be compromised. It means that, from a single safe source, we can meet 98% of all handling requirements, supplied to you via a range of competitive finance options including outright purchase, rental or leasing. So your local dealer can advise you on precisely the right product for your application. and your budget. Moreover, because we understand how much you depend on your Mitsubishi forklift truck, we deliver the highest levels of customer support. Through a network of carefully selected dealerships, we provide quality maintenance and customer care programmes that guarantee complete peace of mind. Every dealership holds extensive stocks of manufacturer-approved parts, backed by a central store that holds literally millions of items constantly in stock and achieves a first-pick fulfilled rate of 97%. So your truck can be fixed first time, virtually every time. You can find your nearest dealer at www.mitforklift.com * Mitsubishi Forklift Trucks has won four separate Fork Lift Truck Association Annual Awards for Excellence covering the areas of Ergonomics, the Environment and Innovation. WEGM0429 (02/03) 2003 MCFE Printed in The Netherlands mitforklift@mcfe.nl www.mitforklift.com NOTE: Performance specifications may vary depending on standard manufacturing tolerances, vehicle condition, types of tyre, floor or surface conditions, applications or operating environment. Trucks may be shown with non-standard options. Specific performance requirements and locally available configurations should be discussed with your distributor of Mitsubishi forklift trucks. Mitsubishi follows a policy of continual product improvement. For this reason, some materials, options and specifications could change without notice.
Main features Light, ergonomically designed tiller arm with easily accessed controls means efficient operation with minimum effort. Latest-technology high-frequency speed controller, programmable to match customer requirements, ensures optimum performance in every application. Spacious cabin with low step height and suspended, non-slip floor adds to driver comfort and efficiency. Patented load-sensing device to optimise drive wheel pressure on floor for improved traction. Lubrication-free tandem load wheels reduce maintenance and give greater stability. Electronic diagnostics and good service access to mechanical and electrical components minimises downtime and maximises productivity. Options In addition to its impressive range of standard features, the following options are available on the OPB20T: Walk-beside driving buttons Pallet entry and exit rollers Special RAL colour for frame and fork carriage Cold storage modification (class III, -35 C) Rollers for fast battery change Battery changing device Pick list holder (A4) Holders for plastic foil Pocket for small items Hour metre / battery discharge indicator Rubber bumper Regenerative braking Centralisation of all controls on tiller head
Applications A low level order picker provides an effective means of collecting customers orders from your store or warehouse shelves and moving them to the point of dispatch (on pallets or in picking cages). Order picking is a time-consuming operation in which the efficiency of your equipment and work practices is very important if high levels of productivity are to be achieved. The versatile OPB20T low level order picker from Mitsubishi works at first and second pick heights, handling 1-3 picking cages or 1-2 pallets. Among its most important features is its ergonomic tiller arm, which allows the choice of walk-beside or ride-on modes for optimum efficiency. Operators will find the walk-beside mode particularly useful when order picking at the first level at or below their own height. Controls on the tiller arm can be accessed with one hand, leaving the other free to handle goods and paperwork. Manoeuvring is simple and precise, with walk-beside speed maintained at a suitable 2.5km/h. For order preparation at the second level, the operator simply uses the conveniently placed platforms to reach greater heights. Ride-on operation, with rapid maximum speed (7.8km/h), reduces fatigue for drivers working over greater distances and longer shifts.