Products Solutions Services Endress+Hauser Frame Integration Mechanisms Enhanced DTM integration into Endress+Hauser FDT frame applications Slide 1
Agenda FieldCare is an Endress+Hauser frame application that is focused on the process industry. Over the years, certain enhancements were added to FieldCare in order to provide a closer integration of DTMs and bypass certain FDT 1.x limitations. These enhancements are also included throughout the latest generation of Endress+Hauser FDT frame applications. This talk describes the specific integration mechanisms as well as best practices in order to enable Comm-/Gateway/Device-DTM vendors to reach a deeper integration within current and future Endress+Hauser FDT frame applications. Slide 3
Agenda Introduction Endress+Hauser E+H FDT software products Frame Integration Mechanisms Focus of this talk: Quality Scanning and Condition Monitoring Summary Slide 4
Introduction - Endress+Hauser Family owned business 12 000 employees Based in Reinach, CH Focus: Process Industry Sensors and Analytics E+H Process Solutions AG Software Services Solutions Slide 5
Introduction - FieldCare Endress+Hauser FDT frame application Software has been on the market for more than 12 years FDT1-only frame Used by every E+H service technician Often as a point to point configuration tool Broad usage throughout the Process Industry More than 5000 installations at customer sites worldwide FC has much more to offer than just P2P 24/7 Condition Monitoring of complex plants Asset Management integration Plugin / Batch capabilities for maintenance phase Copyright by Sander Hoogendoorn. field of weed, Field of weed at the coast of Normandie - France. Released under Creative Commons 2.0 License, https://creativecommons.org/licenses/by/2.0/ Slide 6
Introduction - FieldCare 2.10.00 UI update, latest FDT security enhancements, FDT 1.2.1 scanning, Slide 7
Introduction - DeviceCare Based on M&M fdtcontainer component Slide 8
Frame Integration Copyright by certified su / Title Integration Released under Creative Commons 2.0 License, https://creativecommons.org/licenses/by/2.0/ Slide 9
Frame Integration - Overview Set of extensions implemented in FieldCare over the years At the beginning mostly used by E+H internally as we develop the frame as well as DTMs Internal best practice / guidelines Other device manufacturers are increasingly interested in using these additional frame functionalities due to customer requests Why this talk might be interesting for you DeviceDTMs: Usage of extended FieldCare Quality Scanning features PactWARE %-Sanning feature Comm-/GatewayDTMs: Prepare for Condition Monitoring projects Slide 10
Frame Integration - Basics DTM languages Minimum: German / English E+H standard defines 19 additional languages License interface Interface available to detect specific E+H frame applications (e.g. useful for licensing) GetParameters / SetParameters DTM s configuration user interface hidden from user for selected Comm- /GatewayDTMs in latest E+H frame applications Used for automation of work flows user does not have to deal with setting the communication parameters Slide 11
Frame Integration - Basics Deep integration of an E+H CommDTM into DeviceCare Slide 12
Frame Integration - Quality Scanning FDT 1.2 scanning functionality is limited Example A customer has bought three E+H Prosonic Flow devices All three have (of course) the same Manufacturer / Device Type ID but a different Device Revision A different DTM exists for each version of the device Identifying the correct DTM with plain FDT 1.2 scanning mechanisms would not be possible (Device Revision information not available for matching ) Slide 13
Frame Integration - Scanning Interface DeviceDTM manufacturer can provide additional information in the DTMDeviceType (used by FieldCare to perform the matching) Example for HART (PROFIBUS / FF also available): Slide 14
Frame Integration - Quality Scanning Quality 1 is our goal! Advantages of a Quality 1 match: Uninterrupted scanning through topologies! Automatically go online with the DTM in P2P scenarios after scanning Slide 15
Frame Integration - Scanning Interface Slide 16
Frame Integration Condition Monitoring Customers increasingly demand solutions for 24/7 device monitoring FieldCare offers such a solution: Condition Monitoring CM regularly queries the status of field devices Possibility to query just the status or perform advanced calculations Library of supported devices is constantly growing This part of the talk presents a successful Condition Monitoring project and highlights how deep integration of Comm-/GatewayDTMs enables Condition Monitoring Slide 17
Frame Integration Example CM Project Example Condition Monitoring project Green field coal fired power station FieldCare in combination with Asset and Calibration Management More than 22 000 devices in FieldCare projects Several hundred gateways Monitored 24/7, therefore long term stability required Slide 18
Frame Integration - Condition Monitoring Why is the deep integration of your Comm-/GatewayDTM into FieldCare of value to your customers and you? Increasing demand to monitor existing / new plants 24/7 E+H maintains a hardware recommendation list Used as a guideline for project execution We offer to perform internal tests to verify the CM capabilities of your communication hardware Stability of the Comm-/GatewayDTMs is our main focus for these projects, therefore the following architecture applies: Server: Runs Comm-/GatewayDTMs and device placeholders Clients: Used by engineers to configure sensors via DeviceDTMs FDT communication is transparently forwarded from the client to the server Slide 19
Frame Integration - Condition Monitoring Guideline defines how Comm-/Gateway DTMs shall be implemented to support advanced Condition Monitoring scenarios Architectural considerations: Connections per channel, logging, simulation capabilities, Development / Test: Static code analysis, prevent memory and handle leakage, CM test scenarios Debugging: Create and store the PDB files for each version that you have released! Slide 20
Summary - Now it is your turn Detailed technical guideline including best practices available Small, easy to implement extensions improve customer workflows All concepts are transferred to all new E+H frame applications Several Comm-/GatewayDTM and DeviceDTM manufacturers have updated / extended their DTMs to use these FieldCare extensions Guideline is available upon request Dr. Ingomar Sotriffer (Product Manager FieldCare) ingomar.sotriffer@solutions.endress.com M&M has implemented CommDTMs for E+H and other companies that follow the guideline Slide 21