May 2015 FDT Group Update

Size: px

Start display at page:

Download "May 2015 FDT Group Update"

Geraldine Crawford
10 years ago
Views:

2 Contents FDT Group Intro DTM Certifications Cyber Security OPC and Industry 4.0 Mobility 29/06/2015 3

3 29/06/2015 FDT GROUP INTRO

4 FDT Group Introduction FDT Group is an international, non-profit organization (AISBL) o Incorporated in March 2006 History of more than 5 year prior o Funded by membership dues More than 90 members world-wide More than 100 active volunteers Headquartered in Jodoigne, Belgium Purpose o Technically advance the FDT standard o Drive adoption of FDT standard by international standards bodies IEC ISA / ANSI 103 China GB/T o Raise awareness of the FDT standard with end users and vendors

5 29/06/2015 DTM CERTIFICATIONS

2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 DTM Certification Trends Independent labs carry out the test procedures o FDT office

6 DTM Certification Trends Independent labs carry out the test procedures o FDT office audits the labs FDT Office issues device certificates upon passing the tests Visit for a list of DTMs Devices Supported by Certified DTMs DTM Certificates Issued * as of 30 April 2015

7 29/06/2015 CYBERSECURITY

FDT Cyber Security A new cyber security infrastructure has been established o o o Threat response Security architecture Security quality assurance Independent audit of the FDT standards will be

8 FDT Cyber Security A new cyber security infrastructure has been established o o o Threat response Security architecture Security quality assurance Independent audit of the FDT standards will be complete in Summer 2015 o Will result in best practices documents at a minimum FDT members should name an cyber security contact Visit technical documents for additional information Security Quality Assurance WG Security Architecture WG FDT Cyber Security Security Incident Response WG

9 29/06/2015 OPC AND INDUSTRY 4.0

10 Creation of FDT 2 - OPC UA info model (1 / 2) Network / devices need to be configured, before they can be used. This can e.g. be done in a normal engineering tool using the DTMs. Configured network topology / device type information can be used to generate basic part of FDT 2 OPC UA information model create Engineering tool plan

11 Creation of FDT 2 - OPC UA info model (2 / 2) Information provided by the DTMs can be used to complete the information model o Device type information o Parameter information o IO information o Supported DTM functions Engineering tool create read

OPC UA server as FDT frame application OPC UA server can use device DTMs to access data o o o Enables access to all parameters, IOs Enables data read and write

12 OPC UA server as FDT frame application OPC UA server can use device DTMs to access data o o o Enables access to all parameters, IOs Enables data read and write OPC server doesn t need protocol specific handling OPC Server FDT frame application OPC UA Clients browse read/write data execute function Data access interface

13 Next steps toward Industry 4.0 Concept combines where FDT and OPC fits best OPC provides uniform interface for many different client applications FDT provides network / device configuration and access to devices FDT concepts enable unification of system engineering, configuration & diagnosis in Industry 4.0 FDT supports Industry 4.0 devices, but is also able to build a bridge to Industry 3.0 networks and devices Required FDT extensions are FDT OPC UA protocol annex specification FDT / AutomationML data mapping annex specification

14 29/06/2015 MOBILITY

15 FDT Mobility Survey - Overview FDT Group is sponsoring a survey being conducted to better understand the market requirements of using the FDT standard in a mobile setting Respondents > Copyright 2014 FDT Group AISBL. All rights reserved. 16

16 FDT Mobility Study When doing device management with the FDT Standard, how often do you perform: o device installation and configuration? o device monitoring? o do alarm management and diagnostics? o do you do calibration and maintenance? Are there situations or tasks for which a mobile solution for device management would be useful? In what context might you work with a mobile solution? Will you have network connectivity (e.g. 3G/4G/WiFi) in your mobile application context? Does your mobile solution need to work in a hazardous environment? What tasks might you perform with such a mobile solution? Would you expect that the mobile application reacts to the proximity to a machine or device? Copyright 2014 FDT Group AISBL. All rights reserved. 17

17 FDT Mobility Study A smartphone or tablet has many capabilities and sensors that traditional computers do not have. Which of these could be useful with mobile device management? If some of these terms are unknown to you, leave the corresponding check boxes unchecked. How many Device Type Managers (DTMs) should be included in a single application on the mobile device? How important is a reliable synchronization across devices (desktop, mobile devices) for you? Do you have concerns regarding the security of a mobile device management? Which aspects should determine who has access to certain functions in the mobile application? Which mobile devices should be supported by the FDT technology? Which mobile operating systems should be supported? Would you expect that you can use your personal mobile device for device management? Copyright 2014 FDT Group AISBL. All rights reserved. 18

18 29/06/2015 CLOSING

19 FDT Group Members

20 Stay connected rg 29/06/

Endress+Hauser Frame Integration Mechanisms

Products Solutions Services Endress+Hauser Frame Integration Mechanisms Enhanced DTM integration into Endress+Hauser FDT frame applications Slide 1 Agenda FieldCare is an Endress+Hauser frame application