Academy Programme 2014

English krones Academy Programme 2014

New in 2014 Seminars about Filling, Process and Labelling Technology and Management Course no. Title Language Location Page F 14 Modulfill VFJ, VFS, VFL Filler German Neutraubling/DE 11 F 15 Modulfill HES, HEL Filler German Neutraubling/DE 11 B 10 Twin Flow System Operator Training German Neutraubling/DE 24 B 11 Botec F1 Super User Workshop German Neutraubling/DE 25 L 19 Cold-Glue Labelling Station German Neutraubling/DE 28 M 19 Aseptic Block Supervisor (in 3 Modules) German Neutraubling/DE 102 More machine types upon request 1

The Academy Recipe: Creating Tangible Values With Knowledge Table of Contents Important Information in Brief 2 Plastics Technology 4 Filling Technology 10 Cleaning Technology 17 Process Technology 18 Labelling Technology 26 Inspection technology 40 Packaging and Palletising Technology 48 Electrotechnology 55 Automation 68 IT Solutions 83 Management Training 91 Extra Services 104 2014 Dates/Locations/Prices 106 Worlwide krones Academy Addresses and Contacts 126 Dear Reader, In order to prepare a good meal, it s sufficient to follow a recipe. However, anyone who wants to whip up a delicious dish needs an understanding of the individual ingredients and techniques and their interactions. The same applies to operating a system. With a vague knowledge, it is possible to achieve acceptable results. But those who want to work profitably need more than that. If you want to utilise this decisive more, you re in good hands at the krones Academy. That s because our courses cover the entire value chain of a beverage company and impart practice-based knowledge for any task. Highlights include: The magic three comprise seminars and tools for automation with which downtimes can be minimised (Page 68 69). The training to become an Aseptic Block Supervisor minimises costs and increases product quality for sensitive beverages (Page 102 103). The krones machine driving licence enables you to gain transparency on the expertise of your team and to derive suitable measures (Page 104). In addition, we will also be happy to create individual solutions for you. Just phone us and we can discuss together which training courses will help you achieve your objectives most quickly. According to our motto: future-oriented and value-securing. I look forward to greeting you at the krones Academy and I want to wish you a successful year in 2014. Jörg Puma Director of the krones Academy 1

Important Information in Brief Important Information in Brief Course Topics For detailed information regarding the content of the courses, please visit our Website (www.krones.com/en/academy.php) or contact krones Academy directly. Registration Website: www.krones.com/en/academy.php E-mail: academy@krones.com Serial Number When registering, please enter the serial number of your machine(s). In this way, our trainers can prepare for the requirements of the course participants in a targeted manner. Seminar Schedule Start of the seminar: End of the seminar: 8:00 am (9:00 am on the first day) approx. 4.00 pm Cancellations Cancellations are free of cost if we receive them at least two weeks before the start of the seminar. Please note that in case of a cancellation within two weeks before the seminar, the complete course fees must be paid. Instead of a cancellation, the participation in the course can be transferred to another person free of cost. Our seminars do not take place until a minimum number of participants register. For this reason, krones Academy reserves the right to cancel, postpone, or change seminars. Participants will be informed. Individual Courses In addition to our catalogue program, we offer courses that are tailored to your individual needs. For more information, please contact your respective local krones Academy. Our team there is happy to advise you on all eventualities. The management training times may differ. Accommodation Upon desire, we are happy to help you reserve accommodation. To avoid problems, please send us the name and travel data of the participants at least 10 days before the start of the course. Please note that the incurred hotel costs (including extras like telephone, cleaning, and so on) must be paid by the participants directly in the respective hotel. If this is not possible on your part, we will pay the hotel bill for you (plus a 19 % processing fee) and then invoice you for the costs. In this case, please send us a written request to assume the costs (including a specification of which costs should be assumed) before the arrival of the participants. Transfer In Germany, we can organise a free transfer between the airport or train station, your hotel, and krones Academy, as well as within Neutraubling, Rosenheim, and Flensburg. If you would like to take advantage of this service, then simply inform us during registration. 2 3

Plastics Technology Plastics Technology Contiform Operation Course: P 01 Duration: 2 days Well-founded machine knowledge is absolutely necessary for high line efficiency. You will obtain the necessary knowledge of Contiform in this course. After only two days, you will be able to operate the machine alone. In addition, you will know all lubricating intervals and lubricating points, as well as which smaller faults can be quickly remedied. Operators Contiform 2 and 3 None General information on the Contiform Explanation of the mechanical system Overview of the process engineering (heating and blowing processes) Meaning of the lubrication system Important touch screen functions Starting and converting the machine Recipe management A Contiform 3 (zenon 6.22) is available for the practical training units. Neutraubling (DE), Franklin (US) Dates/prices: See pages 106 107 Contiform Basics (and Introduction to the Electrical Components) Course: P 02 Duration: 3 4 days How can faults be remedied quickly and how can production stability be permanently optimised? With the right degree of background knowledge and practical exercises, this seminar will enable you to operate the Contiform safely and make important settings and adjustments yourself. Optional (only Neutraubling): The additional fourth day is dedicated to the Contiform electrical system and can be booked optionally. Operators, mechanics, electricians, electromechanics, line managers, maintenance staff Contiform 2 and 3 None Basic topics: Construction and method of operation of the Contiform Machine pneumatic system Lubrication intervals Overview of possible faults and solutions Heating and blowing process Visualisation zenon 6.20/6.22: surround with alarms and diagnose faults (touch screen) Recipe management (create and change recipes) Air recycling system Electrical system topics: AS-i-Bus, B&R controller, Profibus, krones wiring diagram A Contiform 3 (zenon 6.22) is available for the practical training units. Neutraubling (DE), Franklin (US), Taicang (CN) Dates/prices: See pages 106 107 4 5

Plastics Technology Plastics Technology Contiform Mechanical Adjustments Course: P 03 Duration: 2 days Contiform Maintenance Course: P 04 Duration: 2 days The objective of this seminar is malfunction-free production with shorter downtimes. You will find out how you can avoid faults consistently through the proper adjustment of the Contiform and thus permanently increase the efficiency of the machine. In addition, you will make the adjustments yourself on the training machine and learn how to optimise it further. The content for Detecting and remedying mechanical faults round off your knowledge. Operators, mechanics, electromechanics, maintenance staff Contiform 2 (K43X-XXX and K78X-XXX) or Contiform 3 (K441-XXX) You must have attended the course Contiform Basics (P 02) or have similar experience on the machine. Overview of the individual components of the Contiform, including the touch screen Practical adjustments on mould carriers, blowing/heating module, stretching unit, cams, etc. Transfer synchronisation Lubrication and maintenance A Contiform 3 (zenon 6.22) is available for the practical training units. Neutraubling (DE), Franklin (US), Taicang (CN) How are maintenance costs kept low? By using wear-and-tear parts correctly at the right point in time. This course gives you the necessary expertise to perform servicing efficiently and safely. Exercises on the training machine make sure that you can implement what you have learned in your own company immediately. The carefully developed documents also act as an ideal basis for knowledge to increase output permanently and minimise downtimes. Mechanics, electromechanics, maintenance staff Contiform 2 (K43X-XXX and K78X-XXX) You must have attended the course Contiform Basics (P 02) or have similar experience on the machine. Reacting correctly to faults Replacing wear-and-tear parts Wear parts strategy Checking and exchanging components Correctly adjusting new parts A Contiform 3 (zenon 6.22) is available for the practical training units. Neutraubling (DE), Franklin (US) Dates/prices: See pages 106 107 Dates/prices: See pages 106 107 6 7

Plastics Technology Plastics Technology Contiform PET Process Engineering Course: P 05 Duration: 3 days Contiform Air Recycling Course: P 06 Duration: 1 day This course supports you in achieving consistently high bottle quality even in case of very lightweight preforms with a narrow processing window. In addition, you will find out how to adjust the machine to new bottle types and optimise parameters. Operators, mechanics, mechatronic engineers, quality auditors, line managers Contiform 2 and 3 none Basic PET knowledge Decisive process factors Setting and optimising parameters for new bottles Using and managing recipes on the touch screen Significance of process parameters in relation to preform and bottle specifications Practical exercises on the machine including how to set up new bottles Optimising processes for low energy consumption Saving recipes A Contiform 3 (zenon 6.22) is available for the practical training units. Neutraubling (DE), Franklin (US), Taicang (CN) Dates/prices: See pages 106 107 Minimising the blowing air consumption is an effective method for noticeably reducing the operating costs of the Contiform. Air Recycling 2, 3, 4, and 5 programs can mean up to 40 % savings for the expensive oil-free compressed air. You can discover the best methods to use the programs in this seminar: you will become familiar with the functions and pneumatic components. Targeted exercises also guarantee that you can set the parameters on your own after the course. Operators, mechanics, mechatronic engineers, quality auditors, line managers, shift supervisors Contiform 2 and 3 You must have attended the Contiform Basics (P 02) course or have similar experience on the machine. Explanation of the pneumatic components Pneumatic diagram (blowing module, heating module) Air Recycling 2, 3, 4, and 5 (components and functions) Practical exercises with the machine A Contiform 3 (zenon 6.22) is available for the practical training units. Neutraubling (DE) Dates/prices: See pages 106 107 8 9

Filling Technology Filling Technology Fillers Tailor-Made Courses For Any System Duration: 4 days A fundamental understanding of the machine is the best basis for systematic troubleshooting. This seminar therefore teaches you everything you need to know about your filler from operation, function and the mechanical system to servicing and troubleshooting. Operators with maintenance tasks, mechanics, mechatronic engineers, and servicing technicians; if interested also line managers, shift supervisors, and electricians Experience with the machine is an advantage, but not absolutely necessary. The following filler courses are available: Course no. F 01 F 02 F 09 Designation VODM Volumetic Filler Suitable for Volumetic VODM and Variants Mecafill VKP/Modulfill HRS filler Suitable for Mecafill VKP, Mecafill VKPV, Mecafill VKPV-CF, Mecafill VKP-PET, Mecafill VKP-DL and Modulfill HRS Sensometic VP Filler Suitable for Sensometic VP-I, VP-VI, VP-VM, VP-L, VP-I-PET and VP-L-PET Recommendation: Can be combined with course Varioclean CIP System (B01) Construction and method of operation of the filler Troubleshooting on the filler valve Pipeline diagrams Operating and cleaning programs Control and visualisation on the touch screen Pneumatic system Cleaning, lubricating, and maintaining the machine Servicing the most important subassemblies All courses in Neutraubling (DE); F 01 and F 02 also in Franklin (US), Bangkok (TH) and Taicang (CN) Dates/prices: See pages 106 109 F 14 (New!) F 15 (New!) Modulfill VFJ, VFS and VFL filler Modulfill HES and HEL filler 10 11

Filling Technology Filling Technology Aseptic Filling (AF) Course: F 03 Duration: 5 days Efficient Troubleshooting for Aseptic Systems Course: F 10 Duration: 3 5 days A product recall causes one of the greatest possible loss that can happen to a beverage manufacturer. For this reason, a basic understanding of the processes and control is absolutely necessary especially for aseptic filling. The seminar provides the necessary basic information and a well-founded insight into the hygienic aspects of filling. Operators, mechanics, electricians PET-Asept L (PES) and PET-Asept D (H 2 O 2 ) None Process sequence and control via program Hygienic standards Function Principle of troubleshooting Process Control System (PCS) Basics Neutraubling (DE), Franklin (US), Taicang (CN) Dates/prices: See pages 108 109 This course aims at providing you efficient troubleshooting strategies. By means of a questionnaire, we determine your concrete training requirements before the start of training and individually adapt the contents. This procedure has proven itself when it comes to creating more reliable production process flows. Fewer downtimes and fewer quality risks and problems are the result of this training. Line managers, maintenance staff, operators krones PET-Asept Systems Knowledge of aseptic filling; work experience with krones PET-Asept systems. krones PET-Asept system: Process overview krones PET periphery process overview Overview of the aseptic process PCS basics PCS in operation Process analysis and troubleshooting working through a list of questions Optional: specialised production support Customer filling plant on site Dates/prices: See pages 108 109 12 13

Filling Technology Filling Technology Aseptic Filling Technology Maintenance Course: F 12 Duration: 1 day Preventive maintenance is one of the most important factors for keeping downtimes low in the long run. You will acquire the necessary knowledge in this course. You will familiarise yourself with the filler subassemblies and learn which particular hygienic measures are required for an aseptic system. Systematic exercises with training models allow you to practise and enhance what you have learned under instruction. Maintenance staff, operators with maintenance tasks; quality staff, laboratory technicians krones PET-Asept Systems Experience with aseptic filling Critical hygiene areas in an aseptic system Important hygiene measures during servicing Hygiene in the maintenance environment Practice: preparation and performing of the servicing of aseptic components (filling valve, distributor, etc.) whilst observing hygienic conditions. Neutraubling (DE) Dates/prices: See pages 108 109 Process Control System (PCS) in Practice Course: F 13 Duration: 2 days This seminar sheds a light on the highly complex aseptic processes, which are vital for quality: You will find out more about process-relevant influence variables and learn to use them. Moreover, the seminar will inform you on how to apply the process control system (PCS) for continuous process monitoring - in both each machine and the entire process. In the process, the focus is on the function and control of the aseptic system, the monitoring of quality-relevant parameters, and possible consequences for the quality of various products. Shift supervisors, line managers, production managers, factory managers, quality managers krones PET-Asept Systems Knowledge of aseptic filling Technical basics: terms and definitions, sensitivity of beverages, quality assurance Explanation of the aseptic process PCS basics: signal transmission, recipe structure, program control PCS control and visualisation system Process-relevant parameters: phase and class parameters, sterility, CIP, SIP Neutraubling (DE) Dates/prices: See pages 108 109 14 15

Filling Technology Cleaning Technology Filling Technology Maintenance Course: F 17 Duration: 2 days Bottle Washers Step by Step Course: C 01 Duration: 4 days Preventive maintenance is one of the most important factors for keeping downtimes low in the long run. You will acquire the necessary knowledge in this course. You will be introduced to the individual filler subassemblies and the required special tools. Targeted exercises with training models allow you to practise and enhance what you have learned under instruction. Mechanics and servicing staff krones Filling machines (Mecafill, Isofill, Sensometic, Volumetic, Modulfill) Basic knowledge in general mechanics and filling technology Bottle bypass unit Drives Product manifolds and air distributors Lifting cylinders Filling valves Removal, dismantling, exchange, assembly, installation, and adjustment of wear-and-tear parts Neutraubling (DE) Dates/prices: See pages 108 109 Bottle washers work perfectly only if they are operated and serviced properly. This seminar will provide you with the necessary knowledge: You will learn how to best handle and maintain the machine. In addition, you will find out how to calculate the ideal amount of cleaning agent to achieve the best possible cleaning result at minimum cost. And thanks to a fundamental understanding for the machine processes, you will be able to optimise processes and hygienic standards and reduce downtimes when the seminar is over. Operators, mechanics, electricians All krones bottle washers apart from the Spiragrip. None Function of the bottle washers Differences between the bottle washers Introduction to process engineering Cleaning and maintenance Mechanical and electrical systems Troubleshooting Overview of existing upgrades Flensburg (DE) Dates/prices: See pages 108 109 16 17

Process Technology Process Technology VarioClean CIP System Course: B 01 Duration: 0.5 days Flash Pasteuriser Thermal Product Treatment Course: B 03 Duration: 1 day This course is ideal for you if you want to reduce the CIP downtimes and reduce the connected costs to a minimum. With a focus on the Cleaning Parameters and Product Quality core topics, you will familiarise yourself with the fundamentals of the machine technology, the control concept, and the visualisation system. Information regarding the cleaning parameters and their influence on the cleaning process complete your knowledge. Operators, mechanics, electro-mechanical engineers, quality auditors, line managers, shift supervisors VarioClean None Recommendation: Can be combined with the Volumetic VODM Filler (F 01) and Mecafill VKP Filler (F 02) courses Basics of cleaning technology (ph values, chemicals, cleaning sequences, etc.) Components of the CIP system Safety instructions Prior to, during and after production Control and visualisation Possible malfunctions during the process Reading the setpoint and actual values correctly and comparing them Cleaning and maintenance Neutraubling (DE) Dates/prices: See pages 108 109 In beverage process, heat treatment is most effective method to guarantee high product quality. In order for you to be able to take advantage of the pasteurisation technology optically, this course will provide you with well-founded basic knowledge: in just a day you will become familiar with the function diagram of the flash pasteuriser, the control concept, the visualisation, and the most important parameters. Operators, mechanics, electromechanical engineers, quality auditors, line managers, shift supervisors VarioFlash B, VarioFlash J, VarioAsept None Recommendation: Can be combined with the Volumetic VODM Filler (F 01) and Mecafill VKP Filler (F 02) courses Basics of heat treatment Components and process sequences Safety instructions Prior to, during and after production Type change-over on the touch screen Control and visualisation Possible malfunctions during the process Reading the setpoint and actual values correctly and comparing them Cleaning and maintenance Neutraubling (DE) Dates/prices: See pages 108 109 18 19

Process Technology Process Technology Bottle, Can and Product Treatment (Pasteuriser) Course: B 04 Duration: 1 day This workshop offers you a comprehensive insight into the pasteurisation process. After only a day, you are able to perform inspection and maintenance work on the machine quickly and efficiently. The pasteurisation result is thus permanently optimised with minimum downtimes. Operators, mechanics, electricians, electronics engineers, mechatronic engineers, quality auditors, laboratory technicians, line managers, shift supervisors SHIELD None What is pasteurisation? How does the pasteuriser work? Pasteuriser structure Central Heat Exchanger Supply System (CHESS) Mechanical and electrical components Operation: touch screen, cleaning Flensburg (DE) Dates/prices: See pages 108 109 Contiflow Mixer Course: B 06 Duration: 1 day An optimally adjusted mixer reduces the costs during the production process. For this reason, this course tells you how to set parameters properly and remedy faults efficiently. Maintenance technicians Contiflow None Recommendation: Can be combined with the Volumetic VODM Filler (F 01) and Mecafill VKP Filler (F 02) courses Construction and function of the machine Mixing principle, calculation of the mixing rations, mixing with fixed percentages Automatic compensation, setting of the mixing parameters Setting the machine parameters Adding new product types, setting type parameters Production and CIP programs Brix measurement and CO 2 parameters Internal and external signal transmission of the machine Alarms, diagnostics, troubleshooting Neutraubling (DE) Dates/prices: See pages 108 109 20 21

Process Technology Process Technology Efficient Handling of Botec F1 Controlled Lines Course: B 08 Duration: 3 days evoguard Valve Technology Course: B 09 Duration: 1.5 days This workshop is designed to make the handling of Botec more efficient and the close any gaps in knowledge. At the beginning of the course, you will receive a questionnaire in which we will determine your individual training needs. In the course, the questions and topics that are relevant to you will be handled systematically. The knowledge of the processes and parameters gained in this manner will pay off noticeably in production: due to more stability, shorter downtimes, and fewer quality risks. Operators, line managers, process managers Botec F1 process control system Experience in handling process systems, basic MS Office knowledge Process parameters Process steps and recipes Process step interrelations Botec F1 recipe editor Generating and evaluating the batch log Trend evaluation Troubleshooting and process explanation ( what, why, how? ) Neutraubling (DE) Dates/prices: See pages 108 109 Fast and proper maintenance lowers the quality risks and thus the costs of rejects. This seminar puts the necessary equipping tool for the maintenance of valves in your hand: you have the opportunity to practice on training models and see how valves are disassembled and reassembled and how seals are exchanged. A theoretical part regarding process engineering and control technology round off the seminar. Maintenance staff and operators, as well as process engineers and process technicians evoguard Valve Series Basics of filling and process technology Recommendation: Can be combined with the Volumetic VODM Filler (F 01) and Mecafill VKP Filler (F 02) courses Function of the individual valves (using models, only in house at krones) Process engineering basics Pneumatic system Disassembly and assembly of individual valves using training components (only in house at krones) Controller Maintenance and servicing Neutraubling (DE) Dates/prices: See pages 108 109 22 23

Process Technology New Process Technology New Twin Flow System (TFS) Operator Training Course: B 10 Duration: 1 day Botec F1 Super User Workshop Course: B 11 Duration: 10 days A fault occurs in ongoing operation - what do you do? The better you understand the system, the faster malfunction causes can be located and eliminated. You will acquire the necessary knowledge in this training course: For example, by practising which valve is switched when, you become familiar with the detailed system operation. In addition, you also gain valuable knowledge about which parameters affect the beer quality and how you can use this knowledge effectively at your plant. System operators and brewmasters Twin Flow System (TFS) Good knowledge of the production and filtering of beer Process steps: Sterilisation, preparation, filtration, product change-over, CIP Components and their maintenance Technological aspects of filtration Processing and operating materials Emergency Stop and locking devices In-line measurements and their methods of operation Neutraubling/DE Dates/prices: See pages 110 111 This workshop enables you to reliable master demanding tasks and problems without outside help. After ten days you will be capable of independently carrying out back-up care, designing screens for the visualisation system, creating trend graphics, creating users and assigning authorisations. In addition, you will learn how to locate stepping conditions or locking devices in the software and program recipe procedures. During the workshop you will process your own project on a simulated system. This enables you to immediately implement the content of the training course and to put your knowledge to the test under actual conditions, but without a risk. System support personnel, PLC system programmers Botec F1 with ILTIS A good knowledge of and, ideally, practical experience with PLC programming (Siemens Simatic Step7), practical experience with Botec F1 and a basic knowledge of using SQL servers and local networks Addition of a new component or a new unit in the system configuration Creating the process steps for new units with the related parameters Adapting the visualisation system Creating and adapting locking devices in the PLC Programming control logics system for new units/new components in the PLC Testing the programming on a simulated system Neutraubling/DE Dates/prices: See pages 110 111 24 25

Labelling technology New Labelling technology New Cold-Glue Table Machine Course: L 17 Duration: 4 days Cold-Glue Module Machine Course: L 18 Duration: 4 days A malfunction occurs what now? This seminar provides you with tried-and-true strategies with which you can quickly put the machine back on course. Here you ll become familiar with effective methods for specifically locating and effectively eliminating malfunction causes. Then long downtimes and problems with product quality will be a thing of the past. And so that you can apply what you ve learned immediately at your plant, a large part of the seminars consists of practical exercises. Operators, mechanics, electromechanics, line managers, maintenance staff All krones table machines with cold-glue labelling stations None Theoretical topics: Overview of the machine functions Mechanical and electrical components Work and checks prior to, during and after production Control elements, touch-screen Detection of malfunctions and their rapid elimination Glue, label, and container quality Converting handling parts Practical topics (approx. 70 % of the training time): Adjustment and practical work from container infeed to machine discharge on glue roller, glue scraper and pallet carrousel on label magazine and gripper cylinder up to label transfer to the containers on the brushing on station, rolling-on station Maintenance work and lubrication points Neutraubling (DE), Franklin (US), Bolton (UK), Bangkok (TH), Johannesburg (ZA) Dates/prices: See pages 112 115 The objective of this seminar is efficient production with unplanned downtimes. You will learn how to consistently avoid malfunctions with the correct adjustment and maintenance work, permanently increasing the efficiency. After four days with many practical exercises, you can work independently with the machine while achieving a high labelling quality and quickly eliminating various faults. Operators, mechanics, electromechanics, line managers, maintenance staff All krones module machines with cold-glue labelling stations None Theoretical topics: Overview of the machine functions Mechanical and electrical components Work and checks prior to, during and after production Control elements, touch-screen Detection of malfunctions and their rapid elimination Glue, label, and container quality Practical topics (approx. 70 % of the training time): Adjustment and practical work from container infeed to machine discharge Converting handling parts, docking/undocking labelling stations on glue roller, glue scraper and pallet carrousel on label magazine and gripper cylinder up to label transfer to the containers on the brushing on station, rolling-on station on the RPC to adjust the rotation of the bottles Maintenance work and lubrication points Neutraubling (DE), Franklin (US), Bolton (UK), Johannesburg (ZA) Dates/prices: See pages 114 115 26 27

Labelling technology Labelling technology New Cold-Glue Labelling Station Course: L 19 Duration: 2.5 days Cold-Glue Labeller Maintenance Course: L 16 Duration: 5 days Producing malfunction-free? Without unplanned downtimes, but with a high level quality? You will find out how to do that in this seminar. At a training machine you will practice all important adjustment and maintenance work on a labelling station so that you can reliably apply your new skills back at your plant. And you will learn effective methods with which you can not only quickly discover malfunction causes, but above all can also specifically eliminate them. Operators, mechanics, electromechanics, line managers, maintenance staff All krones table and module machines with cold-glue labelling stations None Theoretical topics: Maintenance intervals and adjustments Detecting and remedying faults Glue, label, and container quality Practical topics (approx. 90 % of the training time): Adjustment and practical work from the glue roller to the glue scraper to the pallet carrousel on label magazine and gripper cylinder up to label transfer to the containers on the brushing on station, rolling-on station Neutraubling/DE Dates/prices: See pages 114 115 Are there proven strategies for how to reliably and quickly eliminate machine failures? And can malfunctions already be prevented before they occur? The answer to both questions is yes. This seminar will show you how best to react in case of an emergency: You will learn how to quickly restore the machine to proper working order when problems occur. And you will become familiar with effective maintenance methods with which you can avoid risks and errors from the outset. Mechanics and servicing staff All krones cold glue, tabletop, and module machines Basic knowledge in general mechanics and labelling technology Practical topics (approx. 90 % of the training time): Removing, repairing, assembling and adjusting of worm drive, toothed belt and universal joint shaft guidance handling parts and dead plates bottle table, servo motor seal kit, rotary plate encoder, setting zero point On labelling station Glue roller bearing, glue scraper Pallet unwinder Label magazine Gripper cylinder Neutraubling/DE Dates/prices: See pages 112 113 28 29

Labelling technology Labelling technology Self-Adhesive Technology Course: L 04 Duration: 2 days Sleevematic 795 M for Shrink Sleeves Course: L 05 Duration: 2 days Spur the labeller to top performance without unplanned downtimes and product faults? You will find out how to do that in this seminar. You will gain an understanding of the design and functionality of the machine, enabling you to work independently and reliably with it. You will learn how to quickly eliminate malfunctions and how to avoid them from the start in future. Practical exercises will enable you to apply the methods and knowledge you learn immediately in your everyday working life. Operators, mechanics, electromechanics, line managers, maintenance staff Autocol APS 3 and APS 4 tabletop and module machines None Overview of the machine functions Pneumatic system and electrical components Operation of the machine and touch screen Troubleshooting Conversion Adjustment (approx. 50 % of the training time): Container table, container head Machine infeed and discharge Conveyor drive Application arm, application wedge Label application wedge Peeled-label carrier film disposal unit Label removal unit to container Lubrication and maintenance Requirements on the label and container quality Parameters Shrink labels are an excellent means to promote sales. The prerequisite is, however, that they must sit perfectly on every container. You can discover how you can achieve this within a brief period in this course. Knowledge on the setting of parameters and the performance of maintenance tasks also help you avoid downtimes and produce permanently at a high level. Operators, mechanics and maintenance staff ONLY FOR Sleevematic Model 795 M Linear Machine for Shrink Sleeves None Overview of the machine functions Label and container path Operation of the machine and touch screen Explanation of the most important parameters Adjustment work Machine infeed, mandrel, cutting ring, conveyor and transfer rollers Quality of labels and containers Maintenance and lubrication Neutraubling (DE), Franklin (US), Taicang (CN) Dates/prices: See page 110 111 Neutraubling (DE), Franklin (US), Bolton (UK), Taicang (CN) Dates/prices: See Page 110 111 30 31

Labelling technology Labelling technology Canmatic Labeller Operation or Maintenance Course: L 11 Duration: 2 2.5 days The more qualified the machine maintenance, the more efficient the machine operation. With systematic exercises and valuable background knowledge, this course will enable you to get the maximum out of your Canmatic. All training contents are explained and exercised directly on a training machine. Please note: The course for the operator lasts two days, and the course for the maintenance staff two and a half days. Operators, technicians, mechanics, quality assurance and laboratory staff, line managers, servicing managers Canmatic for wrap-around or pre-cut labels None Function of the labeller Glue, label, and container Application: from label to container The container flow from the infeed to the discharge Setup of the labeller including the synchronisation of the labelling aggregate Conversion Using the touch screen Safety devices and displays Care and maintenance Remedying faults Labeller Change-Over Workshop Course: L 07 Duration: 2 days Efficiency is frequently neglected during conversions. To counteract this problem, methods for more productive conversion will be worked out together in this workshop. In the process, the workshop takes the individual situation of your line into consideration. The new process is described in a check list and can be implemented immediately in your plant. Our trainers work according to the SMED method, which is also applied within the scope of TPM. Operators, mechanics, electromechanics, line managers all krones labellers None Analysis of the actual situation Determination of your objective together with operators and managers Optimisation of the process using the experience of the team members Development of a new method Setting down of the new process in a check list Conversion using the newly defined processes Measurement of the time savings Neutraubling (DE), Franklin (US) Dates/prices: See pages 112 113 Franklin (US) Dates/prices: See pages 112 113 32 33

Labelling technology Labelling technology Contiroll (745) Hotmelt Technology Course: L 02 Duration: 4 days Fewer costs in servicing, more efficient conversion: this course will show you how to achieve these objectives. In four days, you will obtain all knowledge that you need to keep the Contiroll in operation in the best possible manner and to maintain it optimally. During the practice section on our training machine, you have the opportunity to test and practice the targeted methods in peace. Operators, mechanics, electromechanics, line managers, maintenance staff Contiroll (745) None Overview of the machine functions Pneumatic system and electrical components Operation prior to, during and after production Control elements, touch screen, troubleshooting Conversion: Proper procedure Optimisation of the process Adjustment work Container passage through the machine Brushing-on station/rolling-on station Label holder, automatic label reel adhesion Label film buffer, label film guider Feed roller, cutting unit, gluing unit Vacuum gripper cylinder, label transfer point Label parameters Lubrication and maintenance Label, container, and glue quality Contiroll Hotmelt Machine Maintenance Course: L 15 Duration: 3 days Fewer standstills, fewer malfunctions, longer service life this course will show you how to increase the productivity of the labeller permanently. You will discover how to correct any machine failures quickly and how to perform preventive maintenance. A training machine and special training modules give you the opportunity to test and practice the introduced methods with the help of the trainer. Mechanics and servicing staff Contiroll 745, Contiroll HS, Contiroll module Basic knowledge in general mechanics and labelling technology Servicing and adjustment in practice: rolling-on station, turntable, gluing unit, cutting unit, vacuum cylinder Servicing of the machine drive Routine maintenance and lubrication work Handling special tools Neutraubling/DE Dates/prices: See Page 112 113 Neutraubling (DE), Franklin (US), Bolton (UK), Bangkok (TH) Dates/prices: See page 110 111 34 35

Labelling technology Labelling technology Hotmelt Technology, Contiroll HS (High Speed) Course: L 03 Duration: 4 days Label at high speed and with perfect quality? With the right operation and servicing, this is child s play for the Contiroll. With the right amount of background knowledge and practical exercises, this seminar lets you guarantee perfect product quality and quickly remedy any faults. Operators, mechanics, electromechanics, line managers, maintenance staff Contiroll HS (High Speed) tabletop and module machines None Overview of the machine functions Pneumatic system and electrical components Operation and checks prior to, during and after production Control elements, touch screen Troubleshooting Conversion Adjustment work Machine infeed and discharge Brushing on, rolling on Label holder, automatic label reel adhesion Film wedge control, conveyor roller, cutter Glue roller and glue scraper, vacuum-grip cylinder Label transfer to the container Lubrication and maintenance Label, container, and glue quality Parameters Contiroll HS (High Speed) Operator Training Course: L 08 Duration: 2 days This course provides you with insights into the Contiroll HS, its controller functions and the navigation on the touch screen. By means of practical exercises, you will gain the necessary security for efficiently operating the Contiroll HS on a high production level. Operators, mechanics and maintenance staff Contiroll HS (High Speed) None Structure, safety and function of the Contiroll HS Pneumatic components Touch-screen menu guidance Maintenance and lubrication Basic knowledge of electrical components Handling containers and labels Elementary troubleshooting method Franklin (US), Bangkok (TH) Dates/prices: See Page 112 113 Neutraubling (DE), Franklin (US), Bangkok (TH) Dates/prices: See pages 110 111 36 37

Labelling technology Labelling technology Contiroll HS (High Speed) Maintenance Course: L 09 Duration: 3 days This maintenance course will help you in reaching maximum productivity with the Contiroll HS. During three intensive training days you enhance your knowledge about setup, the mechanical structure, and the timing of the machine. This enables you to check, set, and correct all mechanical functions of the Contiroll HS. Operators, mechanics and maintenance staff Contiroll HS (High Speed) Participation in the Contiroll HS Operator Training (L 08) course or corresponding knowledge Explanation of the mechanical and pneumatic components with practical exercises Maintenance intervals, servicing Adjustment procedures for Contiroll HS components Removal and installation of necessary components Proper cleaning and care exercises Deepening of knowledge in regard to the troubleshooting method Contiroll HS Systematic Troubleshooting Course: L 14 Duration: 2 days Most companies have instructions on how to remedy faults. In the event of a malfunction, it is important to quickly spot the cause of the trouble. In this course, you will learn methods for systematically finding and eliminating causes of faults. By means of practical exercises, you can immediately apply what you have learned on a Contiroll HS. Maintenance staff, mechanics, line managers Contiroll HS Sufficient experience with the machine Methods, basics and definitions Practical troubleshooting on the Contiroll HS Touch screen: the most frequent fault messages Adjustment faults on the Contiroll HS Neutraubling (DE), Franklin (US) Dates/prices: See pages 112 113 Neutraubling (DE), Franklin (US), Bangkok (TH), Taicang (CN) Dates/prices: See pages 112 113 38 39

Inspection Technology Inspection Technology Linatronic M2 - Basic Course Course: I 01 Duration: 4 days Linatronic M2 Advanced Course Course: I 02 Duration: 4 days Forward-looking work brings more results than just reacting to faults. For this reason, this course deals with more than just the avoidance of standstills. You will also find out how to save unnecessary costs for new glass: with the right machine settings, you reduce the reject rate while maintaining a high quality standard. Practical exercises on the Linatronic training machine provide the opportunity to test and deepen what you have learned in practice. Electricians, electronic engineers, mechatronic engineers Linatronic 735 M2, 712 M2 Basic knowledge of electrical equipment Construction and function Overview of the electrical and electronic components Hardware plan Bus systems Operation Format change Inspection units Troubleshooting Data back-up Creation of new users Neutraubling (DE) Are you a Linatronic expert? You will be after this seminar. This seminar enables you to master almost all faults and other tasks on the machine independently. Based on the knowledge from the basic course, you learn how to increase the inspection precision even further. The setup of new container types and efficient remedying of faults are practised directly on the training machine. Electricians, electronic engineers, mechatronic engineers Linatronic 735 M2, 712 M2 Participation in the Linatronic M2 basic course (I 01) or similar knowledge Brief review of the basics of inspection technology Creation and parametrisation of a new container type Explanation and parametrisation of the test container program Adjustment of the shift register Error diagnosis using the oscilloscope Replacement of faulty components Neutraubling (DE), Taicang (CN) Dates/prices: See pages 114 115 Dates/prices: See pages 114 115 40 33 41

Inspection Technology Inspection Technology PET-View Course: I 03 Duration: 3 days Checkmat 731 / 752 Course: I 05 Duration: 3 days Various preform types and different ambient temperatures can lead to faults and failures. This seminar shows the interactions between these variables and gives you the opportunity to adapt the inspection efficiency optimally to your respective conditions. The setup of new container types and efficient remedying of faults are practised directly on the training machine (Contiform with integrated PET-View). Electricians, electronic engineers, mechatronic engineers PET-View type 776 Basic knowledge of electrical equipment PET-View design and function Overview of the electrical and electronic components Operation Function and parametrisation of the inspection units Bottom inspection Opening inspection Side wall and bottom quality Troubleshooting Neutraubling (DE), Taicang (CN) With a Checkmat, you assure the quality of your products but only if it is used and adjusted properly. In this course, you will learn how to optimally work with the Inspector and how to prevent rejection of faultless products. To create a learning environment that is close to reality for you, a training machine is always available for the course. Electricians, electronic engineers, electromechanics Checkmat 731/ 752, Sekamat, Cantronic, ModulCheck Basic knowledge of electrical equipment Construction and function of the filler Overview of the electrical and electronic components Operation Function and parametrisation of the inspection units Setup of a new container type Determining and remedying faults Data back-up Franklin (US), Bangkok (TH), Taicang (CN) Dates/prices: See pages 114 115 Dates/prices: See pages 114 115 42 43

Inspection Technology Inspection Technology Checkmat 707 Course: I 06 Duration: 1 day Checkmat 707 with DART Course: I 07 Duration: 1 day With a Checkmat, you assure the quality of your products but only if it is used and adjusted properly. In this course, you will learn how to optimally work with the Inspector and how to prevent rejection of faultless products. To create a learning environment that is close to reality for you, a training machine is always available for the course. Electricians, electronic engineers, electromechanics Checkmat 707 with LCT 3 controller Basic knowledge of electrical equipment Mechanical structure of the inspection unit Adjustment, operation, maintenance, and cleaning Introduction to the machine documents Parametrisation of the inspection units Determining and remedying faults Data back-up Neutraubling (DE), Franklin (US), Bangkok (TH) Dates/prices: See pages 116 117 With a Checkmat, you assure the quality of your products but only if it is used and adjusted properly. In this course, you will learn how to optimally work with the Inspector and how to prevent rejection of faultless products. To create a learning environment that is close to reality for you, a training machine with DART is always available for the course. Electricians, electronic engineers, electromechanics Checkmat 707 with DART Basic knowledge of electrical equipment Mechanical structure of the inspector Adjustment, operation, maintenance, and cleaning Menu guidance in the visualisation Parametrisation of the inspection units Determining and remedying faults Restoring of the system after a malfunction Neutraubling (DE) Dates/prices: See pages 116 117 44 45

Inspection Technology Inspection Technology Modular Linatronic 735 Basic Course Course: I 08 Duration: 5 days How do I work with the Linatronic 735? How do I optimally adjust the inspection systems? How do I proceed in case of a malfunction? This course familiarises you with the components of the Linatronic 735 and enables you to perform all important work steps independently. Practical exercises also guarantee that you gain confidence and routine quickly when working with the machine. Electricians, electronic engineers, mechatronic engineers Linatronic 735 Basic knowledge of electrical equipment Construction and function Overview of the electrical and electronic components Hardware plan Bus systems Operation Format change Inspection units Explanation and parametrisation of the test container program Troubleshooting Data back-up Neutraubling (DE) Modular Linatronic 735 Advanced Course Course: I 09 Duration: 5 days Become a Linatronic expert in only five days. This course gives you the opportunity to deepen your knowledge from the basic course further. You will find out how to set up new container types. use the diagnosis function efficiently, and much more. Practical exercises on the training machine make sure that you can implement what you have learned in your own company immediately. Electricians, electronic engineers, mechatronic engineers Linatronic 735 Participation in the Linatronic 735 Basic Course (I 08) or similar knowledge Brief review of the basics of inspection technology Creation and parametrisation of a new container type Adjustment of the shift register Error diagnosis using the oscilloscope Replacement of faulty components Calibration of servo drives Neutraubling (DE) Dates/prices: See pages 116 117 Dates/prices: See pages 116 117 46 47 33

Packaging and Palletising Technology Packaging and Palletising Technology Non-returnable Packaging Technology Course: D 01 Duration: 2 days Palletising Technology Course: D 02 Duration: 2 days Even when packaging machines are used, the following applies: productivity increases drastically due to expert operation and conversion. You can gain the necessary knowledge in this hands-on seminar. After only two days, you are able to operate the machine safety, perform conversions independently, and assume maintenance tasks. Operators with maintenance tasks, mechanics, maintenance staff, line managers Variopac, Wrapapac (from zenon 5.5 onward), Variopac Pro None Safety systems Function and operation of touch screen Function and operation of the P127 controller (if used) Demands on the glue, carton and film quality Main functions of the machine Identification and elimination of faults (diagnostics functions) Replacement of motors, frequency inverters, encoders Cutter replacement at the film cutting module Machine pneumatic system SEW Movigear controller for conveyor Reading, understanding and using connection diagrams Machine conversion Explanation of the parameters Electrics and gas, shrinking tunnel (krones, Sotec) Lubrication and maintenance Spare parts documentation and orders Rosenheim (DE), Taicang (CN) Dates/prices: See pages 116 117 Pallets are absolutely necessary for transport and storage. It is thus even more important to achieve high efficiency and thus a minimum error rate during palletising. You will find out how in this course. This course will also handle the correct adjustment of the machines and the detection, remedy, and avoidance of faults. Operators with maintenance tasks, mechanics, maintenance staff, line managers Modulpal, Robobox, pallet and container conveyors, modular palletiser None Safety systems Function and operation of touch screen Basic functions of the machine Quality requirements for intermediate layers Main functions of the machine Identifying and eliminating faults (diagnostic functions) Exchange of motors, encoders, Acopos/Danfoss frequency inverters Calibration of the servo axis Machine pneumatic system Reading, understanding and using connection diagrams Machine conversion Explanation of the parameters Fully automatic gripper change (if used) Gripper head Lubrication and maintenance Spare parts documentation and orders Rosenheim (DE), Taicang (CN) Dates/prices: See pages 116 117 48 38 49

Packaging and Palletising Technology Packaging and Palletising Technology Packaging Technology Course: D 03 Duration: 1 day Robobox and Modulpal Course: D 04 Duration: 3 days Fault-free packaging is important for your product. And for your production? That too! This is because how a packaging machine is adjusted, operated, and maintained directly affects its productivity. In this course, you will discover which requirements must be fulfilled so that you can get the maximum from your machine. Proven strategies for detecting and remedying faults round off the course. Operators with maintenance tasks, mechanics, maintenance staff, line managers Modulpal, Linapac, Linapac II, Smartpac, pack conveyor, container conveyor None Safety systems Function and operation of touch screen Basic functions of the machine Quality requirements: Glue and carton Main functions of the machine Identification and elimination of faults (diagnostics) Replacement of motors, Acopos frequency inverters, encoders Calibration of motors and encoders Pneumatic components Reading, understanding and using connection diagrams Machine conversion Explanation of the parameters Fully automatic gripper change (if used) Differences between the different cup grippers Lubrication and maintenance Spare parts documentation and orders Rosenheim (DE), Taicang (CN) Dates/prices: See pages 116 117 Label at high speed and with perfect quality? This is child s play for the team of Robobox and Modulpal but only in case of proper operation and maintenance. With the right amount of background knowledge and practical exercises, this seminar lets you guarantee perfect product quality, quickly remedy any faults, and prevent failures. Mechanics, maintenance staff, line managers Modulpal, Robobox, pallet and container conveyors, modular palletiser Basic technical knowledge Safety systems Function and operation of touch screen Basic functions of the machine Main functions of the machine Identification and elimination of faults (diagnostics) Exchange of motors, encoders, Acopos/Danfoss frequency inverters Calibration of the servo axis Machine pneumatic system Reading, understanding and using connection diagrams Machine conversion Explanation of the parameters Fully automatic gripper change (if used) Gripper head Lubrication and maintenance Spare parts documentation and orders Replacement of motors, Acopos frequency inverters, encoders Rosenheim (DE) Dates/prices: See pages 116 117 50 51

Packaging and Palletising Technology Packaging and Palletising Technology Modulpal Returnable Technology Course: D 05 Duration: 3 days A fundamental understanding of the machine is the best basis for high productivity This seminar thus teaches you everything you need to know about the Modulpal disposal technology, from operation, function, and the mechanical system to the maintenance and servicing of the most important components. Mechanics, maintenance staff, service technicians, electricians, line managers Modulpal, pallet and container conveyors, modular palletiser basic technical knowledge Safety systems Function and operation of touch screen Basic functions of the machine Main functions of the machine Identification and elimination of faults (diagnostics functions) Exchange of motors, encoders, Acopos/Danfoss frequency inverters Calibration of the servo axis Machine pneumatic system Reading, understanding and using connection diagrams Machine conversion Explanation of the parameters Fully automatic gripper change (if used) Gripper head, hook gripper Lubrication and maintenance Spare parts documentation and orders Replacement of bearings, belts, and linear units Rosenheim (DE) Dates/prices: See pages 116 117 Modulpal Non-Returnable Technology Course: D 06 Duration: 3 days A fundamental understanding of the machine is the best basis for high productivity This seminar thus teaches you everything you need to know about the Modulpal disposal technology, from operation, function, and the mechanical system to the maintenance and servicing of the most important components. Mechanics, maintenance staff, service technicians, electricians, line managers Modulpal, pallet and container conveyors, modular palletiser basic technical knowledge Safety systems Function and operation of touch screen Basic functions of the machine Main functions of the machine Identification and elimination of faults (diagnostics functions) Exchange of motors, encoders, Acopos/Danfoss frequency inverters Calibration of the servo axis Machine pneumatic system Reading, understanding and using connection diagrams Machine conversion Explanation of the parameters Fully automatic gripper change (if used) Gripper head, louvre head Lubrication and maintenance Spare parts documentation and orders Replacement of motors, Acopos frequency inverters, encoders Rosenheim (DE) Dates/prices: See pages 116 117 52 53

Packaging and Palletising Technology Electrotechnology Packaging and Palletising Technology Innovations Course: D 07 Duration: 2 days krones Electrical Technology for Mechanical Maintenance Staff Course: E 01 Duration: 2 days What s new in the area of packing and palletising technology? This course will provide you with concrete answers to this question. You obtain a complete overview of all machines and information on the state of the art in developments and find out whether and how you can implement the introduced innovations profitably in your company. Managers, line managers complete packing and palletising technology basic technical knowledge Packing technology Recycling technology Disposal technology Palletising technology New glass processing Packaging technology Rosenheim (DE) Dates/prices: See pages 116 117 The more versatile your expert knowledge, the better you can react to all kinds of everyday production situations. This course offers you the possibility to obtain well-founded knowledge on electrical technology. This includes the reading and understanding of connection diagrams, the identification of electrical components, and navigation on the touch screen. At the end of the seminar, you will be able to eliminate malfunctions independently and thus reduce the downtimes in case of a machine failure. Operators with maintenance tasks, mechanics, maintenance staff, line managers, servicing managers All krones fillers and labellers Basic knowledge of the mechanics of krones machines is beneficial krones connection diagram system Basics: Bus system, AS-Interface Touch-screen with zenon: type management, user management, and data back-up krones standard encoder (exchange and adjustment) Diagnostics and replacement of components Data back-up and recovery after malfunctions Neutraubling (DE), Franklin (US), São Paulo (BR), Johannesburg (ZA) Dates/prices: See pages 116 119 54 55

Electrotechnology Electrotechnology Contiform Electrical Components Course: E 02 Duration: 2 days How can malfunctions on the Contiform be quickly eliminated? This course will tell you. That s because you are provided with valuable knowledge on the connection diagram and the various components of the machine. And to enable you to react quickly and specifically in everyday production, various malfunctions will be simulated and eliminated in the practice section. Electricians, electronic engineers, mechatronic engineers all Contiform machines basic knowledge of stretch-blow moulders krones Reading a connection diagram Overview of bus structure AS-i bus: Basic principles ASI Safety at Work (machine-specific) Powerlink Profinet Heating controller HC-Net Troubleshooting Neutraubling (DE), Franklin (US), Taicang (CN) Dates/prices: See pages 118 119 Filler Electrical System (LCT3/KFS3 Controller) Course: E 03 Duration: 3 days The quality and efficient that you production achieves also depends on the machine control systems: In order for you to be able to guarantee reliable functionality, this course will tell you how to understand, diagnose, repair, and exchange decisive electrical parts. Electricians, electronic engineers, electrical engineers, electromechanics Mecafill, Sensometic, Volumetic (all with LCT 3 control sytem) Basic knowledge of the mechanical system of the machine is beneficial System overview and paths of communication krones connection diagram Basics of AS-Interface and Profibus Danfoss FC300/VLT5000, MCT10 software Touch screen with zenon krones standard encoder and sensors Diagnostics and replacement of components Filling valve controller KFS3 Operation and parametrisation on the LCT 3 Filling valve and sensor diagnosis Back-up of the parameters (software included in the scope of supply of krones) Diagnostics and troubleshooting Neutraubling (DE), Bangkok (TH), Taicang (CN) Dates/prices: See pages 118 119 56 57

Electrotechnology Electrotechnology Filler Electrical System (FVC Controller) Course: E 04 Duration: 3 days The objective of this seminar is malfunction-free production with minimum rejects: You will find out how to eliminate faults, make repairs, adjust the machine, and resume production after failures. In order for you to be able to track your training success at any time, you can always test your new knowledge interactively. Electricians, electronic engineers, mechatronic engineers Mecafill, Sensometic, Volumetic (new generation) Basic mechanical knowledge System overview krones detailed connection diagram Basics of the bus system, AS-i Safety at Work, Profibus Danfoss FC300/VLT5000 frequency inverter, MCT10 software Touch screen with zenon type management, user management, and data back-up krones standard encoder and sensors Diagnostics and replacement of components Machine faults, filling level and pressure regulation Filling valve controller FVC: function and hardware Network structure: Ethernet, Powerlink, E-link Network diagnostics Filling valve diagnostics Operation and parametrisation Back-up of the parameters (software included in the scope of supply of krones) Replacement of control elements Detection and elimination of faults Cold Glue Labeller - Electrical System Course: E 05 Duration: 2.5 days The label is the business card of every product. In order for the label to make a good impression, everything must also go well behind the curtain. This seminar will provide you with the necessary knowledge: You will obtain a complete overview of the electronics and function of the labeller. What you learn will enable you to perform quick diagnostics and eliminate faults properly. Electricians, electronic engineers, electrical engineers, electromechanics Vinetta, Universella, Bonomatic, Starmatic, Solomatic, Topmatic, Multimatic Basic knowledge of the mechanical system of the machine is beneficial krones connection diagram Basics: ASI Safety at Work, Profibus Danfoss FC300/VLT5000, MCT10 software Touch screen with zenon type management, user management, and data back-up Standard encoder and sensors Diagnostics, replacement, and repair of components Neutraubling (DE), Franklin (US), Bangkok (TH) Dates/prices: See pages 118 119 Neutraubling (DE), São Paulo (BR), Bangkok (TH), Taicang (CN) Dates/prices: See pages 118 119 58 59

Electrotechnology Electrotechnology Contiroll and Contiroll HS (B&R Controllers) Electrical System Course: E 06 Duration: 3.5 days Perfect, high speed during all-round labelling is possible only with high-tech machines. To maintain and adjust these machines efficiently, you need expert knowledge and a basic understanding of the electrical system used. This course gives you both: you gain valuable skills for the maintenance of the machine and find out which find adjustments of the servo drives are necessary in order to achieve the best labelling results. Electricians, electronic engineers, electrical engineers, electromechanics Contiroll Classic, Contiroll HS (High Speed) Contiroll Modul, Contiroll HS Module (B&R controller) Basic knowledge of the mechanical system krones connection diagram Basics: ASI Safety at Work, Profibus Danfoss FC300/frequency inverter, MCT10 software Main drive, synchronisation of discharge conveyor Touch-screen with zenon: type management, user management, and data back-up Standard encoder (exchange and adjustment) System overview, network and communication Machine functions, e.g. container breakage recognition, height adjustment, infeed monitoring Parameter setup, fine adjustment of the labelling station on the touch screen Diagnostics, exchange of components and data back-up Neutraubling (DE), Franklin (US), Bangkok (TH), Taicang (CN) Contiroll 745 with LCT 3 controller Electrical System Course: E 07 Duration: 3 days Incorrect maintenance, unknown problems, or a lack of understanding can quickly lead to insufficient product quality in the case of Contiroll labellers. This course gives you the necessary knowledge to repair and fine-adjust the machine properly. Better product quality and shorter downtimes make this training a worthwhile investment. Electricians, electronic engineers, electrical engineers, electromechanics Contiroll 745 with LCT 3 controller Basic knowledge of the mechanical system of the machine is beneficial krones connection diagram Profibus basics Danfoss FC300/VLT5000, MCT10 software Touch-screen with zenon, data back-up Exchange and adjustment of the encoder Function and adjustment of all sensors Exchange of electrical components Parametrisation on the LCT 3 Practical exercises on the training machine Creation and setting of a new label type Diagnostics, exchange of components and data back-up (LCT 3) Neutraubling (DE), Franklin (US), Bangkok (TH), Taicang (CN) Dates/prices: See pages 120 121 Dates/prices: See pages 118 119 60 61

Electrotechnology Electrotechnology Modular Labeller Generation 2 Electrical System Course: E 09 62 Duration: 4 days The objective of this course is to minimise downtimes and sustainably increase the efficiency of the labeller. You obtain a comprehensive introduction to parametrisation on the touch screen. With this knowledge, you are able to search for faults in a targeted manner and eliminate them. In order for you to be able to track your training success at any time, you can always test your new knowledge interactively. Electricians, electronic engineers, mechatronic engineers Modular labellers from year of construction 2009 onward (second generation, one touch-screen for labelling station and machine) Basic mechanical knowledge System overview, communication and network krones connection diagram Basics of the bus system, AS-i Safety at Work, Profibus Danfoss FC300/VLT5000 frequency inverter, MCT10 software Touch-screen with zenon: type management, user management, and data back-up Exchange and adjustment of the 2-in-1 encoder Diagnostics, exchange of components and data back-up Adjustment of the height of the docking stations and the zero reference point RPC rotary plate control system with servomotors: function, parametrisation, diagnostics, motor exchange Labelling stations (cold glue, Autocol, APS3, Canmodul) Function, diagnostics, and troubleshooting Data back-up Neutraubling (DE) Dates/prices: See pages 120 121 Electrical Components for Packaging and Palletising Technology Course: E 11 Duration: 2 days This seminar provides you with a general view of the current electrotechnology which is used in krones packing and palletising technology. The content includes the detection and exchange of electrical components and the referencing of the servo motor axis. An introduction to user management and data back-up on the touch screen complete the seminar. Electricians, electronic engineers, electromechanics All packers and palletisers Basic knowledge of electrical equipment Safety devices Function and operation of the touch screen (zenon) Function and operation of the P127 compact panel (if provided) Basic functions of the machines (customer-specific) Detection and elimination of faults (diagnostics) Replacement of motors, frequency inverters, encoders Calibration of the individual servomotor axes Explanation of the B&R controller and the components (CP360, X20, AC140) SEW Movigear controller for the container conveyor Reading, understanding and using connection diagrams Pneumatic system Machine conversion for type change-over Program parameters Electrics and gas in shrinking tunnel (krones, Sotec) Lubrication and maintenance Spare parts documentation and orders Rosenheim (DE), Taicang (CN) Dates/prices: See pages 120 121 63

Electrotechnology Electrotechnology Basics of the krones Electrical System Course: E 12 Duration: 10 days General krones Electrical System Course: E 14 Duration: 3 days This training deals intensively with the basics of electrotechnology. You will learn how to eliminate any faults quickly, back up data, detect faults, and exchange electrical components. In addition, you will obtain an introduction to the user management system, tips for proper work with the touch screen, and relevant data for production. Illuminating before-and-after evaluations round off the training for you. Electricians, technicians and engineers, line managers krones machines We recommend basic knowledge of Siemens S7. Subtleties of the krones electrical wiring diagram system Basics of the AS-Interface bus system The basics of the Profibus system Danfoss FC300/VLT5000 frequency inverter and MCT10 software (upload/download of parameters) zenon 5.5/6.2: Ghost/user management/data back-up/ type management krones standard encoders Hardware and filling program KFS3/LCT3/KFS5 Siemens PLC Step-7 software and hardware configuration/ upload or download of programs Diagnostics and replacement of components Data back-up and recovery after malfunctions Johannesburg (ZA) This seminar provides you with a general view of the electrical system used in almost all of the krones machines. You will learn how to restore your krones machines quickly to production readiness in case of faults. Special focuses lie on the topics of data security, effective fault diagnosis, and the exchange of faulty electrical components. In the practical part, you have the opportunity to practice the exchange of the encoder or frequency inverter under expert instruction. In additional exercises, you will gain confidence in handling the touch screen, the controller, and production-related data. Electricians krones machines basic knowledge of electrical systems Subtleties of the krones electrical wiring diagram system The basics of the AS-Interface bus system The basics of the Profibus system Danfoss FC300/VLT5000 frequency inverter, MCT10 software Touch screen operating system with zenon software Standard encoder Neutraubling (DE), Taicang (CN) Dates/prices: See pages 120 121 Dates/prices: See pages 120 121 52 64 65

Electrotechnology Electrotechnology Electrical System Training in the Laboratory Course: E 15 Duration: 3.5 days AS-i-Bus Safety Course: E 16 Duration: 0.5 days Master the basis of electrotechnology in only three and a half days? This course makes it possible: You obtain a complete overview of the electrotechnology used in the krones equipment. As required, we are happy to tailor the content specifically to your requirements or your machines. Electricians All krones machines None Understanding of Racos electrical hardware diagrams Basics of Allen-Bradley ControlLogix or Siemens S7 PLC Structure of the communication with the processor Component firmware flashing Hardware configuration Bus systems: AS-i-Bus, Profibus, Ethernet, Devicenet User software/krones programming techniques Diagnostics zenon touch screen krones visualisation philosophy Type/recipe structure User management zenon Explorer B&R automation Hardware overview ACOPOS drive diagnostics Runtime Utility Center Software, K-Dot Utility Software Data back-up Parameter back-up krones image back-up and restoring utility This training supplements the Electrical System Training in the Laboratory (E 15) course and introduces you to the AS-i- Bus interface. As a low-level bus system, it is able to transfer smaller data volumes. Its use makes particular sense when digital signals are required in the field. It also processes analogue signals, however, which change much slower. Thank to its simple structure, you do not need programming knowledge for AS-Interface: For most bus components, especially for security devices, only the respective address must be set. Electricians, electronic engineers, electromechanics All krones machines Basic knowledge of electrical equipment Note: This course is a supplement to Electrical System Training in the Laboratory (E 15). Franklin (US) Dates/prices: See pages 120 121 Franklin (US) Dates/prices: See pages 120 121 66 67

Automation New Automation New krones Automation Concept The Magic Three As if by magic does not apply to your production. It rather requires precise know-how on automation technology, quick access to software and fitting tools for safe process programming. The krones Automation Concept is the formula for your electronical and automation specialists for accurate diagnostics and optimisation of the entire automation technology. Automation Rack Three elements are the basis for success: Automation Engineer Automation Notebook Automation Rack Benefits to you Automation Engineer Automation Notebook Components that are attuned to one another Each of the three elements of the krones Automation Concept can be used on its own as single module in the automation or as interacting components. Original krones Know-how Each of the three elements provide maximum benefit by means of a precise adaption to the krones machine and automation technology. For additional information refer to http://www.krones.com/en/academy/ automation-concept.php or simply scan the QR code. Utmost efficiency at all automation tasks Regardless if training of staff, troubleshooting or function additions in control technology, the krones Automation Concept in the online operation on the machine and in the simulation process is a plus for your production process. 68 69

Automation Automation krones Academy Automation Courses Certification for automation staff Filling companies whose electrical team is familiar with automation technology are characterised by considerably shorter downtimes. This is due to the face that, with the corresponding expert knowledge, problems can be handled and eliminated directly at the source before they cause economic damage. Since our IT trainers all come from practical areas of work, they know exactly what is relevant for you as an electrician, electronics engineer, mechatronic engineer, or IT administrator. Training equipment that we developed ourselves guarantee a learning environment that is close to reality: With this equipment, our modern IT training centres in Neutraubling, Franklin, WI, Johannesburg, Lagos, Nairobi and Bangkok can simulate actual situations. Please note: In addition to the individual courses, we offer a complete certification program for automation staff: krones Automation Engineer As a krones Automation Engineer, you can quickly analyse and remedy faults. You optimise the troubleshooting process and shorten downtimes of the plant. You can obtain the krones Automation Engineer certificate through modular workshops that are divided into a theoretical and practical part. With a corresponding previous education, you have the opportunity to complete the certification test without previous training. Dates/prices: See pages 120 121 70 krones Automation Engineer Requirements Mandatory courses Optional courses Mandatory courses Certificate IT System Technology Basic Course B&R Automation LDS Line Documentation System Basic knowledge of krones technology: IT System Technology Workshop MES Network Technology krones Visualisation Technology zenon Theoretical and practical tests zenon Emergency Package Installation Siemens S7 Basic Course Electrical system of the labelling technology Filler electrical system Contiform electrical system Inspection technology krones Allen Bradley (alternatively) Training duration: between 12 and 15 days 53

Automation Automation krones Automation Notebook As a special service, we offer you the preinstalled krones automation notebook, which already contains the most important software for new diagnostic functions for troubleshooting and data back-up. Hardware: Dell E6530 with adequate equipment (Professional Series) Dell notebook back, Adventure backpack 17 OS Windows 7 Ultimate Simatic S7 USB adapter, USB RS232 adapter for Simatic USB card reader USB2.0 (19 in 11) Software: (technical changes/deviations reserved) Microsoft Office Home and Business 2013 Acronis Backup & Recovery 11 (Downgrade V10) Siemens Step 7 SIMATIC Manager V5.5 SP3 zenon emergency package for zenon 6.20/6.22 B&R Automation Studio 3.0.91 Help, software prepared krones software and utilities Danfoss MCT10 Setup Software VNC Viewer: Remote Access HMI B&R CPU diagnostics K-DOT, PDWIN, PDEXE: parameter back-up DCopy, DriveCopy, Partition Wizard EasyConfig: Pyrometer configuration (aseptic) DbaMGR2k: SQL, database tool MOVITOOLS Motion Studio 5.70 Optional: Allen Bradley RS Logix 5000 B&R Automation Studio 3.0.9x with PVI Manager, service licence with limited functions S7-PLCSIM V5.4 simulation software automation system Price: upon request Contacts: Markus Wilhelm Telephone: +49 9401 70-4707 E-mail: markus.wilhelm@krones.com krones Automation Racks You would like to get the best out of your automation training? The various krones automation racks are the ideal equipment to further intensify your knowledge after training and develop your own programs. S7 rack The basic module that is also used in our training. Thanks to this hardware, you can import your own projects in connection with the Siemens Step7 software without having to interfere with the machines involved in production. Develop and test your own programmes Practise component replacement Hold automation courses Touch screen rack The expansion with which you can also simulate your machine on your rack. Import and simulate existing machine projects Hold machine trainings for all employees Hold trainings for the software of the zenon touch screen Process own projects AS-i-Safety rack The rack by means of which you can make your technicians fit in the area of security technology. Practise and test with AS-i-Safety components Exchange components Show and simulate the fault on the touch screen rack Evaluation and diagnostics on the touch screen Each of the three IT racks is delivered installed ready to use and tested in a specially developed frame. We also provide carrying cases for the racks to guarantee safe transport in a protective housing. Price: upon request Contacts: Thomas Olbrich Telephone: +49 9401 70-5854 E-mail: thomas.olbrich@krones.com 72 73

Automation Automation Siemens S7 for krones Machines Basic Course Course: A 08 Duration: 4 days How can faults be detected and eliminated faster? How are standstills avoided and a gap-free data back-up created? This course, which takes place in an excellently equipped PLC laboratory, provides you with answers to these questions and concrete solution strategies. It provides you with the programming basics of Siemens S7 for krones machines and creates a general understanding for the function of the PLC. Much of the course content, such as the efficient exchange of components, is accompanied by exercises and thus offers the possibility to implement what is learned into practice immediately. Electricians, electronic engineers, mechatronic engineers, administrators, automation technicians Suitable for the following software: Siemens Step 7, V5.5 (you can purchase the software together with our krones automation notebook; see page 72.) None Configuration: Hardware and peripheral components of a krones machine Subnet Profibus configuration Subnet Ethernet configuration (optional) AS-i Gateway, example based on B&W, Siemens CP343-2 Structure of the user software Data block types and editor (KOP/FUP/AWL) Communication with the subcontrollers or subsystems Data back-up Diagnostics Neutraubling (DE), Franklin (US), Johannesburg (ZA), Bangkok (TH) Dates/prices: See pages 120 121 Siemens S7 for krones Machines Advanced Course Course: A 09 Duration: 4 days You would like to deal more intensively with Siemens S7? This course is the ideal opportunity: You will learn the programming from the ground up and become familiar with the expanded functions of the software. Clear examples and targeted exercises guarantee that you can apply what you learn safety in practice after the course. Electricians, electronic engineers, mechatronic engineers, automation technicians, administrators Suitable for the following software: Siemens Step 7, V5.5 (you can purchase the software together with our krones automation notebook; see page 72.) Participation in Siemens S7 for krones machines - basic course (A08) or equivalent previous knowledge. Your laptop should be equipped with the Simatic Manager. If not, we are happy to support you in the installation. Configuration: Hardware and peripheral components of a krones machine Subnet Profibus configuration, Profibus components Subnet Ethernet configuration (TCP/IP protocol) AS-i Gateway, example based on B&W, Siemens CP343-2 Network technology (Ethernet, DP/DP coupler) Accumulator/index function Communication with HMI and sub systems Data back-up Diagnostics Indirect addressing, pointer, and address register Neutraubling (DE), Johannesburg (ZA), Bangkok (TH) Dates/prices: See pages 120 123 274 75

Automation Automation krones Visualisation Technology zenon Touch Screen Software Course: A 10 Duration: 2 days How does the krones visualisation technology work? With clear examples and practical exercises, you will quickly gain confidence and routine. In our training laboratory, you work on simulations in the current zenon-6.20/6.22 development environment. After the seminar, you will be able to make changes in the visualisation system, remedy faults efficiently, and thus reduce downtimes. Electricians, electronic engineers, mechatronic engineers, administrators, automation technicians Suited for the following software: zenon 6.20/6.22 Recommendation: krones automation notebook (see page 72) krones visualisation philosophy Structure of the hardware and communication modules File structures, project back-up and installation Practical handling of the zenon tools krones emergency package solution Alarm handling and the diagnosis and interpretation of faults zenon Editor (project planning environment) Handling and functions of the zenon Explorer (project management) Functions, menu structure of the zenon Editor, SQL-DB Project manager working environment Configuration of various dynamic elements Configuration of the variable list Editing and adding fault texts and warnings exercises on experimental setups Neutraubling (DE), Franklin (US), Bangkok (TH) zenon Workshop: Emergency Package Installation Course: A 11 Duration: 0.5 days What do you do when the touch screen breaks down? Wait until the problem is solved or a replacement is provided? It is better if you simply operate the machine with the zenon emergency package by laptop or PC. You will find out how in this seminar. This seminar will also show you how to maintain communication with the machine in case of failures. If you book this course together with the krones Visualisation Technology zenon (A 10) seminar, the software licence is included in the seminar price. As an alternative to this course, we offer you a preinstalled krones automation notebook (see page 72). Electricians, electronic engineers, mechatronic engineers, automation technicians Suitable for the following software: zenon 6.20/6.22 Participation in krones Visualisation Technology zenon Touch Screen Software (A 10). Please note: The participants in this seminar must bring their own notebooks on which the zenon emergency package software is installed. Installation of the zenon software with all krones changes Communication with and test of the zenon software Emergency package: zenon 5.50/6.20/6.22 installation CDs, krones software (zenon Explorer, fonts, etc.), USB dongle software licence, all connecting cables, documentation Neutraubling (DE), Franklin (US), Bangkok (TH) Dates/prices: See pages 122 123 Dates/prices: See pages 122 123 76 77

Automation Automation IT System Technology Basics Course: A 12 Duration: 2 days IT System Technology Workshop Course: A 13 Duration: 2 days In this course, you will have the opportunity to expand your existing knowledge to the krones IT system technology. You will obtain a comprehensive understanding for the networking and control technology. With the newly gained knowledge, it will be easy for you to operate your line efficiently and guarantee clear communication with the machine. Electricians, electronic engineers, mechatronic engineers All krones machines equipped with adequate software Participation in Siemens S7 for krones machines - basic course (A08) or equivalent previous knowledge. Recommendation: krones automation notebook (see page 72) krones visualisation philosophy The basics of networking technology Electrical components of the machine Danfoss FC300/VLT500 frequency inverter Reading the Racos connecting diagram Absolute value encoder and shift registers Network and control technology Basics of network technology Profibus AS-Interface HMI-zenOn-6.20/6.22 visualisation Neutraubling (DE), Franklin (US) Dates/prices: See pages 122 123 Experienced knowledge of the IT system clearly reduces the machine downtimes. Problems can thus not only be remedied faster, but also be prevented from the beginning. This workshop gives you comprehensive knowledge of the network and control technology. In the process, hands-on devices and training machines create a realistic learning environment. Electricians, electronic engineers, electromechanics, administrators, automation technicians Contiform S, Contiform H, Contiform SK and all other krones machines with adequate software Participation in IT Technology Basics (A 12). Previous knowledge of Siemens S7 or participation in Siemens S7 for krones machines, basic course (A 08) Recommendation: krones automation notebook (see page 72) Introduction and safety instruction on the Contiform Network and control technology Basics of network technology Step 7 control technology Profibus, AS-Interface HMI zenon-6.20/6.22 visualisation Electrical components of the machine Danfoss FC300/VLT500 frequency inverter Reading the Racos connecting diagram Absolute value encoder and shift register functions B&R controller for the filling and labelling process HC-Net heating controller (optional for Contiform) krones LCT3 controller for filling process (optional) Neutraubling (DE) Dates/prices: See pages 122 123 278 79

Automation Automation B&R Automation (Electrical System) Workshop Course: A 14 Duration: 2 days Control Technology ControlLogix and DeviceNet Course: A 15 Duration: 4 days When working with automation, it is vital to be up-to-date at all times. In this workshop, you work independently on mobile training models that correspond to the state of the art. You obtain a comprehensive knowledge of the operation of the B&R Automation Studio. After two days, you are able to operate and maintain the plant and machines more efficiently and eliminate malfunctions quickly. Electricians, IT experts, maintenance staff, administrators All krones machines equipped with adequate software basic technical knowledge; basic IT and PC knowledge Recommendation: krones automation notebook (see page 72) B&R components for krones (system 2003/ 05/X20, etc.) Basics of drive technology: SDC-Modul, Acopos Basics of B&R Automation Studio 3.0.8x; integrated help system CF creation according to krones standard (Create Image) Diagnostics options for common hardware and Acopos Information on the B&R homepage for downloading the documentation Diagnostics of the B&R hardware components Optionally a software licence for B&R Automation Studio 3.0.8x can be purchased. Please note: The source code of the machine projects will not be passed on to the participants. Neutraubling (DE), Franklin (US), Bangkok (TH) Dates/prices: See pages 122 123 This course demonstrates the contexts and processes in krones plants transparently and understandably. In a laboratory designed solely for training purposes, you will not only learn how to use the hardware and software programming on test racks and training machines, you will also become familiar with the diagnostic functions for the efficient remedying of faults. Electricians, mechatronics engineers, administrators The course has been developed for krones plants. Recommendation: krones automation notebook (see page 72) Communication with the controller Network addresses and allocation Structure of the communication with RSLinx Memory organisation Configuration Project structure Hardware and periphery Tags and tasks DeviceNet RSNetWorx for DeviceNet Adding Flex I/O Mapping I/O data Scanner settings Basic commands Data back-up Diagnostics Neutraubling (DE), Franklin (US) Dates/prices: See pages 122 123 80 81

Automation IT Solutions krones Data Backup Solution (Local/Network) Course: A 16 Duration: 0.5 days Recording and Evaluating Characteristic Values with krones LDS Course: IT 01 Duration: 2.5 days In this workshop, you will discover how to back up all necessary data of the krones machines. You thus prevent data losses and problems like the exchange of parts or the danger of failures. The krones Data Backup Solution is a convenient all-in-one solution that can be executed both locally and in the network. The Acronis Backup & Recovery 10 emergency medium software is already included in the seminar price as single licence. Electricians, administrators, automation technicians Suitable for the following software: Acronis Backup & Recovery 10 None CF data back-up for all krones machines and controllers zenon 5.50SPx, 6.20SPx, 6.22SPx HMI controller B&R controller (FVC, SDC, etc.) B&R controller D.A.R.T. Acronis Backup & Recovery 10 Creation of an emergency boot medium, e.g. USB stick Local data back-up on the machine Data back-up with networked lines to network drives remote PC Scheduled, automatic data back-up without user intervention in defined cycles Group server-based, time-controlled data back-up for all machines in the network Neutraubling (DE) Dates/prices: See pages 122 123 Do you use krones LDS to measure the efficiency of your plant? Are you already familiar with all the functions and parameters of this tool? This seminar makes you more familiar with this instrument, starting with the visualisation functions in the data motor to the DownalyseKit. The proper handling of the LDS Tools makes it easier for you to visualise productivity leaks in your plant. Electricians, shift supervisors, production managers Suitable for the following software: Line Document System (LDS) None Introduction: basics, network overview, client/server hardware Data Monitor Real-time plant visualisation Operating states, counters, trend values, flowcharts Data Chart Trend values, scalable curve generation DownalyseKit Downtime analysis of the lead machine Quick access to production data from any period of time Key factors (line, machine) like efficiency, MTTR, MTBF, OEE Own evaluations, export in Excel Data Archive Recovery of archived data bases Data back-up concepts krones Data Acquisition: Real-time data recording Neutraubling (DE), USA (only on site), Taicang (CN) Dates/prices: See pages 122 123 82 83

IT Solutions IT Solutions SIPS Strategic Maintenance and Planning System Course: IT 02 Duration: 2 days krones SIPS is an efficient system to optimise your planning but only if the user can handle all functions. In this course, you will discover how tasks are activated or distributed, how reports are created, and how new objects are configured. After only two days, you will be able to use the tool with ease so that you can concentrate on your tasks completely. Maintenance staff, servicing managers, all SIPS users Suitable for the following software: Strategic maintenance and planning system (SIPS) None Introduction: basics, environment, plant overview Jobs and instructions: activation, withdrawal, placement, and check-back of jobs Messages Clearing, rejecting messages Creating jobs from messages Reports Preview Current check-back messages Time and personnel expense History of the jobs and check-back messages Costing record Adjustment work People Options Configuration Neutraubling (DE), USA (only on site) Dates/prices: See pages 122 123 Complete Control of Spare Parts Using krones SPMS correctly Course: IT 03 Duration: 2 days Do you have too many or too few spare parts in your warehouse? Can you find every part at any time? The krones SPMS tool helps you answer this question assuming the software is handled properly. In this course, you will find out how to use the software in such a way that it helps you in the organisation of your parts and in shortening the downtimes. Maintenance staff, servicing managers, all SPMS users Suitable for the following software: Spare part management system (SPMS) None Introduction: Basics Special considerations for connecting the parts kit to SPMS Master data and inventory management Creating parts, assigning storage locations Incoming and outgoing goods Booking, ordering, inventory Orders: creating, changing, and deleting Reservations: creating, changing, and deleting Configuration Reports Stocks Consumption Ordering Neutraubling (DE), USA (only on site) Dates/prices: See pages 122 123 84 85

IT Solutions IT Solutions KAM - krones Asset Management Course: IT 04 Duration: 3 days LMS Line Management System Course: IT 05 Duration: 2.5 days krones KAM can do a lot for you. To be able to profit from this instrument fully, however, you must also understand what it is about. Spend a three days with our experts to gain a thorough insight into the system and receive answers to all your questions. Profit from the knowledge and experience of our trainers and their practice-oriented instruction methods. Maintenance staff, servicing managers, all KAM users Suitable for the following software: krones Asset Management (KAM) None Introduction: Working with the workbench Servicing Overview of equipment, personnel Job instructions Maintenance plan Maintenance job Creating messages Reporting Parts management Material warehouse Managing spare parts Booking, ordering, reserving Configuration Basic configuration Expanded personal and user rights Shift configuration KAM configuration Neutraubling (DE) Dates/prices: See pages 124 125 LMS supports you in reducing the conversion times of your plants. In two-and-a-half days of training, you will find out everything you need to know to fully exploit the performance of your system from our specialists. The investment pays off quickly due to a higher availability of the line. Production managers, shift supervisors, operators Suitable for the following software: Line Management System (LMS) None Introduction: Working with the Workbench Activating/deactivating the LMS Production sequence Troubleshooting Order management module Creating production orders in the Workbench Planning/starting orders in the Workbench Changing orders Deleting orders Starting an order on the machine touch screen Material management module Creating, changing, and deleting materials Working with finished goods Working with piece lists krones touch screen Operation of the LMS screens Infeed clear, production start, end of production Neutraubling (DE) Dates/prices: See pages 124 125 86 87

IT Solutions IT Solutions krones IT Tools from the Inside Workshop for Specialists Course: IT 06 Duration: 2 days Facts Immediately on the Table krones ReportKit Course: IT 07 Duration: 1 day Are you familiar with LDS, SPMS, and SIPS? Do you use these instruments regularly? Wonderful! What about your background knowledge? Learn more about the client-server hardware and understand the complete structure of SQL-Server and LDS. These two days will help you get the last bit of efficiency out of these tools. IT staff Suitable for the following software: Line Document System (LDS) Spare part management system (SPMS) Strategic maintenance and planning system (SIPS) Participation in one of the courses A 01, A 02, or A 03 or comparable previous knowledge Introduction: Basics, structure, network overview Client/server hardware LDS module overview Database model MS SQl-Server basics Configuration and data tables MES configuration Installation of new hardware Data Configurator krones Data Acquisition Security concepts Data back-up Archiving and restoring databases Neutraubling (DE) Wouldn t it be great to have OEE, fault logs, or other productivity data directly on your desk? The krones ReportKit does it for you. You should be the one, however, you determines what is reported and where the data comes from. Learn how to use the instrument autonomously and independent of external help. This course turns you into a well-versed user in just a day. Shift supervisors, production managers, managers Suitable for the following software: Line Document System (LDS) and ReportKit None Introduction: Basics Connection with the LDS system Requirements LDS reports in the web browser Efficiency Operating state report Fault analysis report Fault list Program report Product list Production report Stations Test bottle report Customer-specific reports (optional) Neutraubling (DE) Dates/prices: See pages 124 125 Dates/prices: See pages 124 125 88 89

IT Solutions krones Line Performance Analyser LPA Workshop Course: IT 08 Duration: 1 day krones Academy Management Training This practical tool keeps an eye on your system and serves up all of the characteristic values you need in an easily understandable format with minimal effort on your part. To help you get the best out of LPA right from the start, we offer you this workshop. Learn how to use the system efficiently and safely in just one day! Shift supervisors, production managers, managers, lead machine operators Suitable for the following software: Line Documentation System (LDS) and Line Performance Analyser LPA None Introduction: basics, integration into LDS, requirements Entries: standstills, time mode Reports: dashboard, daily, monthly, and annual reports Order and product management Creating, processing, and deleting orders Product management, status report Shift management Assigning shifts Creating templates User management Creating and editing standstill classes Operating panel Starting and terminating orders Classifying idle times Classifying standstills Neutraubling (DE) Dates/prices: See pages 124 125 90

Management Training Management Training krones Management-Training Your personal development as a basis for the success of your company. Target Line Efficiency in 3 Modules Objective Focus Setting Last year alone, more than 300 managers and line managers from almost 20 different countries took part in the seminars and workshops that we held in Africa, Asia, Europe, and South America. In the filling and packaging industry, the krones Management Training is considered to be a reference for the development of managers, at which you gain the opportunity to obtain knowledge, establish a network with other manager, exchange experience, and find the best solution for yourself. We promote this through a wide spectrum of teaching methods, like action learning, best-practice examples, case studies, and peer coaching. 1 Module Analysis Analysis of the potential for improvement Overview of line efficiency and analysis tools I can actively influence the improvement. 2 3 months later 2 Module Optimisation Implementing improvements and integrating the team Communication, conflict management With an active and motivated team, I gain momentum. Approx. 1 year later 3 Module TPM Sustainable change Total Productive Management, 12 steps for introduction, change management I can achieve sustainable improvements by changing the culture. 92 93

Management Training Management Training krones Technology for Career Changers Course: M 03 Duration: 4 days Within the briefest of times, you will obtain a well-founded insight into the most important machines of filling technology that is the objective of the krones Technology for Career Changers course. Optional: For an optimum success, it is best to combine this seminar with the course for packing and palletising technology (M 04), which takes place in the same week. Line managers, logistics managers, factory managers None Overview of the individual machines (PET blow moulders, filler, labellers, and inspection machines) Meaning of the consumption materials (PET, preforms, caps, labels, and glue) Practical training and visits to production Avoidance of faults Limits of the process Future trends Neutraubling (DE) Dates/prices: See pages 124 125 Packaging and Palletising Technology for Career Changers Course: M 04 Duration: 1 day In the case of this seminar, you will gain an insight into the structure, functional principle, and most important technical details of packing and palletising machines. How can you save money through the use of the right materials? With the knowledge you gain, you can analyse important connections in your production and master new situations. Optional: For an optimum success, it is best to combine this seminar with the krones Technology for Career Changers (M 03) course, which takes place in the same week. Line managers, logistics managers, factory managers None Overview of the individual machine types Influence of the consumption materials Practical training: switching on and commissioning the machine Locating and remedying typical faults Special applications Limits of the process Possibilities to optimise the line Rosenheim (DE) Dates/prices: See pages 124 125 94 95

Management Training Management Training Train the Trainer Course: M 06 Duration: 2 days Maintenance Management Course: M 08 Duration: 2 days How can you pass on your knowledge as effectively as possible to your employees? You have expert knowledge and want to know how to pass on this knowledge? This course helps you train and instruct new colleagues. Here, you are obtaining the knowledge and techniques to master your teaching skills and bypass learning resistance. Line managers and shift supervisors None Basics of communication Presentation techniques Planning and preparing training Breaking down learning resistance Involving difficult participants Checking the success of the training Understanding and accepting the role of the trainer Practical exercises with feedback Simulation of training situations on the machine or plant Neutraubling (DE) Dates/prices: See pages 124 125 Do you use too many or too few resources for maintenance? Are you certain that your inspection and overhauling intervals are optimum? Would status-dependent maintenance be a good strategy for you? Discuss this and other questions with our specialists. Learn from the experience of other servicing managers. Visit our two-day seminar and find your answers. Servicing managers At least one year of experience as a servicing manager Measuring success with KPI and OEE Servicing strategies: reactive, preventive, status-oriented Spare parts strategy Optimising routine tasks Overhauling Planning tools Implementing new strategies Best practice sharing with colleagues from your industry Neutraubling (DE) Dates/prices: See pages 124 125 96 97

Management Training Management Training Aseptic Filling and Process Technology Course: M 12 Duration: 2 days Line Efficiency 1 - Analysis Course: M 16 Duration: 2 days High production output at the lowest price and highest quality these are the challenges that every beverage company faces today. How you commandingly master these tasks in aseptic filling and process technology is the core topic of this seminar. Line managers, production managers, quality managers and packaging materials/logistics managers, production managers, factory managers, maintenance managers None Advantages of aseptic filling Definition of terms and legal basics Disinfection concepts Performance and main cost factors Quality assurance Special training requirements and solutions Project plan overview Hygienic design Quo vadis aseptics? - where is aseptics going? Neutraubling (DE) Dates/prices: See pages 124 125 Precise stocktaking is a mandatory requirement to increase the productivity of the plant. In this course, you will learn how to measure economic key figures and systematically analyse weak points in the plant. You will become familiar with proven tools to find the causes for losses and how to implemented this in practice. Methods for determining the financial viability (ROI, TCO) and for shaping management decisions complete your knowledge. Optional: This course can be continued after a several-week practical phase with the Line Efficiency 2 Optimisation (M 17) seminar. Line managers and shift supervisors At least one year of experience as a line manager or shift supervisor Line layout Buffer and overperformance, V-diagram Measurement of buffer times, plant productivity Analysis tools Total cost of ownership (TCO) Economic key figures (Key Performance Indicators KPI) Designing routine tasks more efficiently Employees and their influence on plant productivity Neutraubling (DE), Johannesburg (ZA), Franklin (US), São Paulo (BR), Bangkok (TH) Dates/prices: See pages 124 125 98 9979

Management Training?? Course: M 13?? Course: M 13 Management Management training Training Line Efficiency 2 - Optimisation Course: M 17 Duration: 2.5 days Dates/locations/prices: see page?? How do I effectively put improvement measures into practice in production? Answers to this question can be found in this seminar. You will find out how to involve your team, reduce resistance, and solve conflicts. You will also learn how to communicate the necessary measures upwards and downwards convincingly. Line managers, factory managers Line Efficiency 1 Analysis (M 16) course or comparable experience In retrospect: Experience with the analysis from Line Efficiency 1 Typical reactions to changes Basics of communication Dealing with resistance De-escalating conversation Presenting yourself convincingly both upwards and downwards Creating motivation and dedication Neutraubling (DE), Johannesburg (ZA), Bangkok (TH) Line Efficiency 3 TPM and its Implementation Course: M 18 Duration: 2 days Dates/locations/prices: see page?? There is a decisive difference between fast profits and sustainable optimisations. This course explains what Total Productive Management is and which factors determine the success of a management system. Concrete examples from the beverage sector also demonstrate how the processes can be successfully executed in your company. Line managers, factory managers, project managers Experience in the beverage industry Total Productive Management The eight columns of TPM The role of management in change processes Experience with the implementation of TPM How to implement TPM: Everything at the right time! Economic advantages of long-term thinking Dos and don ts Discussion of individual situations Neutraubling (DE) Dates/prices: See pages 124 125 Dates/prices: See pages 124 125 89 100 101

Management Training?? New Course: M 13?? Course: M 13 Management Management training Training New Aseptic Block Supervisor Training Concept in 3 Modules Dates/locations/prices: Course: M 19 see page?? When does an Aseptic line run optimally? When the operators have a perfect command of both the technology and the hygienic environment. The training course for an Aseptic Block Supervisor ensures both aspects. That s because it is directed at increasing the efficiency and availability of the line with efficient troubleshooting. And it creates the basis for a high level of microbiological safety and the reliable compliance with quality standards. As a trained supervisor, you are able to independently increase worthwhile potentials for optimisation. The tried-and-tested training contents also enable you to provide new line employees with qualified training and to ensure data security during analysis, troubleshooting and reporting. Job specification: Beverage and food-related training, e.g. beverage technicians, brewers, milkers or comparable training At least 2 years of experience in the field of aseptic filling of sensitive beverages as a shift supervisor or QM/QA employee Didactic abilities for passing on knowledge Seminars Dates/locations/prices: Module 1 see page?? Aseptic and Hygiene Basics (1 day) Microbiology of Beverages Practical Training I (3 days) Aseptic Filling and Process Technology I Design/Method of Operation (3 days) Seminars Module 2 LDS System Training (1 day) Mechanical Components in Aseptic Systems (1 day) Aseptic Filling and Process Technology II Process Design/ Method of Operation (2 days) Seminars Module 3 LDS User Training (1 day) Aseptic Filling and Process Technology II Troubleshooting (3 days) Maintenance Overhauling Recommissioning (0.5 days) Beverage Microbiology Practical Training II Killing Attempt, Log-Rate (3 days) Critical Hygiene Points (0.5 days) Test and Assessment (1 day) Neutraubling (DE) Dates/prices: See pages 124 125 Hygiene and microbiology Aseptic Block Problem analysis and troubleshooting Supervisor System and process understanding 102 89 103

Extra Services Extra Services krones Assessment The Machine Driver s Licence How good does your operator team deal with the complex plant technology? Do training needs still exist and if so, where? Our Machine Driver s Licence provides objective answers to this question. Here, we test how safely and expertly the starting, operation, shutdown, and conversion of the plant are performed during production. The Machine Driver s Licence combines theoretical questions with practice exercises and lasts from two to four hours for each participant. We recommend that you perform this evaluation about six months after training or in cases in which the performance lies below your expectations and you require a status and development plan. Operators SOP (Standard Operating Procedures) Easily Understandable Step-by-Step Instructions krones Academy develops individual SOPs for your company. For this purpose, our experienced technical editors develop practice-oriented, easily understandable job instructions together with your production staff. A large number of pictures and a minimum of text make the step-by-step instructions particularly clear. all krones machines Dates/locations/prices: The dates, locations, and prices are determined by the machine type and the method to be used (only on request; only on site in the United States). all krones machines None Theoretical and practical tasks on the machine Dates/locations/prices: The dates, locations, and prices are determined by the machine type and number of participants (only on site in the United States). 104 105

2014 Seminars Course no. Title Language Duration Date Price/participant Location Plastics Technology P 01-1 Contiform Operation German 2 days upon request upon request Neutraubling/DE P 01-2 English 2 days upon request upon request Neutraubling/DE P 01-3 English 2 days upon request upon request Franklin/US P 02-1 Contiform Basics (and electrical components) German 3 4 days April 8 11, 2014 1,185 / 1,580 Neutraubling/DE P 02-2 English 3 4 days upon request upon request Neutraubling/DE P 02-3 English 4 days upon request upon request Franklin/US P 03-1 Contiform Mechanical adjustments (C2) German 2 days May 27 28, 2014 990 Neutraubling/DE P 03-2 Contiform Mechanical adjustments (C3) German 2 days Sept 30 Oct 1, 2014 990 Neutraubling/DE P 03-3 English 2 days upon request upon request Neutraubling/DE P 03-4 English 2 days Jan 16 17, 2014 $ 1,098 Franklin/US P 03-5 Chinese 3 days Jan 7 9, 2014 4,500 RMB Taicang/CN P 03-6 Chinese 3 days April 8 10, 2014 4,500 RMB Taicang/CN P 04-1 Contiform Maintenance German 2 days Sept 25 26, 2014 990 Neutraubling/DE P 04-2 English 2 days upon request upon request Neutraubling/DE P 04-3 English 3 days upon request upon request Franklin/US P 05-1 Contiform PET process engineering German 3 days March 18 20, 2014 1,485 Neutraubling/DE P 05-2 German 3 days Sept 22 24, 2014 1,485 Neutraubling/DE P 05-3 German 3 days Nov 11 13, 2014 1,485 Neutraubling/DE P 05-4 English 3 days upon request upon request Neutraubling/DE P 05-5 English 3 days upon request upon request Franklin/US P 05-6 Chinese 3 days July 22 24, 2014 4,500 RMB Taicang/CN P 05-7 Chinese 3 days Aug 12 14, 2014 4,500 RMB Taicang/CN P 06-1 Contiform Air Recycling German 1 day upon request upon request Neutraubling/DE P 06-2 English 1 day upon request upon request Neutraubling/DE Filling Technology F 01-1 VODM Volumetic filler German 4 days Feb 4 7, 2014 1,580 Neutraubling/DE F 01-2 German 4 days Sept 9 12, 2014 1,580 Neutraubling/DE F 01-3 English 4 days upon request upon request Neutraubling/DE F 01-4 English 2 days upon request upon request Franklin/US F 01-5 Spanish 2 days upon request upon request Franklin/US F 01-6 English 4 days June 2 5, 2014 21,400 THB Bangkok/TH F 01-7 English 4 days Nov 10 13, 2014 21,400 THB Bangkok/TH F 01-8 Chinese 3 days Jan 14 16, 2014 4,500 RMB Taicang/CN F 02-1 Mecafill VKP/Modulfill HRS fillers German 4 days March 18 21, 2014 1,580 Neutraubling/DE F 02-2 German 4 days Sept 29 Oct 2, 2014 1,580 Neutraubling/DE F 02-3 English 4 days upon request upon request Neutraubling/DE F 02-4 English 2 days upon request upon request Franklin/US F 02-5 Spanish 2 days upon request upon request Franklin/US F 02-6 English 4 days June 10 13, 2014 21,400 THB Bangkok/TH F 02-7 English 4 days Nov 17 20, 2014 21,400 THB Bangkok/TH 106 107

2014 Seminars Course no. Title Language Duration Date Price/participant Location F 03-1 Aseptic filling (AF) German 5 days May 5 9, 2014 1,975 Neutraubling/DE F 03-2 German 5 days Nov 17 21, 2014 1,975 Neutraubling/DE F 03-3 English 5 days upon request upon request Neutraubling/DE F 03-4 Chinese 3 days May 20 22, 2014 4,500 RMB Taicang/CN F 03-5 Aseptic filling (AF) Basic course English 2 days upon request upon request Franklin/US F 09-1 Sensometic VP filler German 4 days April 1 4, 2014 1,580 Neutraubling/DE F 09-2 German 4 days Oct 28 31, 2014 1,580 Neutraubling/DE F 09-3 English 4 days upon request upon request Neutraubling/DE F 10-1 Efficient troubleshooting for aseptic systems German 3 5 days upon request upon request on site F 10-2 English 3 5 days upon request upon request on site F 12-1 Aseptic filling technology Maintenance German 1 day upon request upon request Neutraubling/DE F 12-2 English 1 day upon request upon request Neutraubling/DE F 13-1 Process control system (PCS) in practice German 2 days upon request upon request Neutraubling/DE F 13-2 English 2 days upon request upon request Neutraubling/DE F 14-1 Modulfill VFJ, VFS, VFL fillers German 4 days May 13 16, 2014 1,580 Neutraubling/DE F 14-2 English 4 days upon request upon request Neutraubling/DE F 15-1 Modulfill HES, HEL fillers German 4 days Dec 2 5, 2014 1,580 Neutraubling/DE F 15-2 English 4 days upon request upon request Neutraubling/DE F 17-1 Filling technology Maintenance German 2 days Oct 22 23, 2014 790 Neutraubling/DE F 17-2 English 2 days upon request upon request Neutraubling/DE Cleaning Technology C 01-1 Bottle washers German 4 days upon request upon request Flensburg/DE C 01-2 English 4 days upon request upon request Flensburg/DE Process Technology B 01-1 VarioClean CIP system German 0.5 days March 14, 2014 198 Neutraubling/DE B 01-2 German 0.5 days Oct 24, 2014 198 Neutraubling/DE B 01-3 English 0.5 days upon request upon request Neutraubling/DE B 03-1 Flash pasteuriser thermal product treatment German 1 day March 13, 2014 395 Neutraubling/DE B 03-2 German 1 day Oct 23, 2014 395 Neutraubling/DE B 03-3 English 1 day upon request upon request Neutraubling/DE B 04-1 Bottle, can and product treatment (pasteuriser) German 1 day March 12, 2014 395 Flensburg/DE B 04-2 German 1 day Oct 22, 2014 395 Flensburg/DE B 04-3 English 1 day upon request upon request Flensburg/DE B 06-1 Contiflow mixer German 1 day March 11, 2014 395 Neutraubling/DE B 06-2 German 1 day Oct 21, 2014 395 Neutraubling/DE B 06-3 English 1 day upon request upon request Neutraubling/DE B 08-1 Efficient handling of Botec F1 controlled lines German 3 days upon request upon request Neutraubling/DE B 08-2 English 3 days upon request upon request Neutraubling/DE B 09-1 Evoguard valve technology German 1.5 days upon request upon request Neutraubling/DE B 09-2 English 1.5 days upon request upon request Neutraubling/DE 108 109

2014 Seminars Course no. Title Language Duration Date Price/participant Location B 10-1 Twin Flow System (TFS) Operator training German 1 day upon request upon request Neutraubling/DE B 10-2 English 1 day upon request upon request Neutraubling/DE B 11-1 BOTEC F1 Super User Workshop German 10 days upon request upon request Neutraubling/DE B 11-2 English 10 days upon request upon request Neutraubling/DE Labelling technology L 02-1 Contiroll (745) hotmelt technology German 4 days Feb 25 28, 2014 1,580 Neutraubling/DE L 02-2 German 4 days June 3 6, 2014 1,580 Neutraubling/DE L 02-3 German 4 days Nov 4 7, 2014 1,580 Neutraubling/DE L 02-4 English 4 days upon request upon request Neutraubling/DE L 02-5 English 3 days June 2 4, 2014 $ 1,497 Franklin/US L 02-6 English 3 days June 14 16, 2014 $ 1,497 Franklin/US L 02-7 English 2 days Jan 30 31, 2014 575 Bolton/UK L 02-8 English 2 days March 13 14, 2014 575 Bolton/UK L 02-9 English 2 days May 15 16, 2014 575 Bolton/UK L 02-10 English 2 days July 10 11, 2014 575 Bolton/UK L 02-11 English 2 days Sept 18 19, 2014 575 Bolton/UK L 02-12 English 2 days Nov 13 14, 2014 575 Bolton/UK L 02-13 English 3 days June 19 21, 2014 16,000 THB Bangkok/TH L 02-14 English 3 days Nov 27 29, 2014 16,000 THB Bangkok/TH L 03-1 Hotmelt technology, Contiroll HS (High Speed) German 4 days March 4 7, 2014 1,580 Neutraubling/DE L 03-2 German 4 days May 6 9, 2014 1,580 Neutraubling/DE L 03-3 German 4 days Oct 7 10, 2014 1,580 Neutraubling/DE L 03-4 English 4 days upon request upon request Neutraubling/DE L 03-5 English 3 days May 12 14, 2014 $ 1,497 Franklin/US L 03-6 English 3 days Oct 6 8, 2014 $ 1,497 Franklin/US L 03-7 English 4 days April 1 4, 2014 21,400 THB Bangkok/TH L 03-8 English 4 days Sept 8 11, 2014 21,400 THB Bangkok/TH L 04-1 Self-adhesive technology German 2 days May 21 22, 2014 790 Neutraubling/DE L 04-2 German 2 days Dec 3 4, 2014 790 Neutraubling/DE L 04-3 English 2 days upon request upon request Neutraubling/DE L 04-4 English 2.5 days April 23 25, 2014 $ 1,248 Franklin/US L 04-5 Spanish 2.5 days Oct 22 24, 2014 $ 1,248 Franklin/US L 04-6 English 2 days Feb 27 28, 2014 575 Bolton/UK L 04-7 English 2 days April 10 11, 2014 575 Bolton/UK L 04-8 English 2 days June 12 13, 2014 575 Bolton/UK L 04-9 English 2 days Aug 21 22, 2014 575 Bolton/UK L 04-10 English 2 days Oct 9 10, 2014 575 Bolton/UK L 04-11 English 2 days Dec 11 12, 2014 575 Bolton/UK L 04-12 Chinese 3 days Dec 16 18, 2014 4,500 RMB Taicang/CN L 05-1 Sleevematic 795 M for shrink sleeves German 2 days April 29 30, 2014 790 Neutraubling/DE L 05-2 English 2 days upon request upon request Neutraubling/DE L 05-3 English 2 days upon request upon request Franklin/US L 05-4 Chinese 3 days June 10 12, 2014 4,500 RMB Taicang/CN 110 111

2014 Seminars Course no. Title Language Duration Date Price/participant Location L 07-1 Labeller change-over Workshop German 2 days upon request upon request Neutraubling/DE L 07-2 English 2 days upon request upon request Neutraubling/DE L 07-3 English 2 days upon request upon request Franklin/US L 08-1 Contiroll HS (High Speed) Operator training English 2 days Jan 9 10, 2014 $ 998 Franklin/US L 08-2 English 2 days May 8 9, 2014 $ 998 Franklin/US L 08-3 English 2 days Sept 18 19, 2014 $ 998 Franklin/US L 08-4 English 2 days April 9 10, 2014 11,000 THB Bangkok/TH L 08-5 English 2 days Sept 18 19, 2014 11,000 THB Bangkok/TH L 09-1 Contiroll HS (High Speed) Maintenance German 3 days upon request upon request Neutraubling/DE L 09-2 English 3 days upon request upon request Neutraubling/DE L 09-3 English 3 days May 5 7, 2014 $ 1,497 Franklin/US L 09-4 Spanish 3 days Sept 10 12, 2014 $ 1,497 Franklin/US L 09-5 English 3 days Feb 27 Mar 1, 2014 16,000 THB Bangkok/TH L 09-6 English 3 days Sept 15 17, 2014 16,000 THB Bangkok/TH L 09-7 Chinese 3 days Feb 18 20, 2014 4,500 RMB Taicang/CN L 09-8 Chinese 3 days July 1 3, 2014 4,500 RMB Taicang/CN L 11-1 Canmatic labeller (operation) English 2 days May 5 6, 2014 $ 998 Franklin/US L 11-2 Spanish 2 days upon request upon request Franklin/US L 11-3 Canmatic labeller (maintenance) English 2.5 days Oct 28 30, 2014 $ 1,248 Franklin/US L 11-4 Spanish 2.5 days upon request upon request Franklin/US L 14-1 Contiroll HS systematic troubleshooting German 2 days June 25 26, 2014 790 Neutraubling/DE L 14-2 German 2 days Nov 26 27, 2014 790 Neutraubling/DE L 14-3 English 2 days upon request upon request Neutraubling/DE L 14-4 English 2 days upon request upon request Franklin/US L 15-1 Contiroll hotmelt machine Maintenance German 3 days upon request upon request Neutraubling/DE L 15-2 English 3 days upon request upon request Neutraubling/DE L 16-1 Cold-glue labeller Maintenance German 5 days March 24 28, 2014 1,975 Neutraubling/DE L 16-2 German 5 days Oct 13 17, 2014 1,975 Neutraubling/DE L 16-3 English 5 days upon request upon request Neutraubling/DE L 17-1 Cold-glue table machine German 4 days Feb 11 14, 2014 1,580 Neutraubling/DE L 17-2 German 4 days April 8 11, 2014 1,580 Neutraubling/DE L 17-3 German 4 days Sept 16 19, 2014 1,580 Neutraubling/DE L 17-4 German 4 days Nov 11 14, 2014 1,580 Neutraubling/DE L 17-5 English 4 days upon request upon request Neutraubling/DE L 17-6 English 3.5 days upon request upon request Franklin/US L 17-7 Spanish 3.5 days upon request upon request Franklin/US L 17-8 English 3 days Jan 13 15, 2014 795 Bolton/UK L 17-9 English 3 days Feb 10 12, 2014 795 Bolton/UK L 17-10 English 3 days March 10 12, 2014 795 Bolton/UK L 17-11 English 3 days April 7 9, 2014 795 Bolton/UK L 17-12 English 3 days May 12 14, 2014 795 Bolton/UK L 17-13 English 3 days June 9 11, 2014 795 Bolton/UK L 17-14 English 3 days July 7 9, 2014 795 Bolton/UK L 17-15 English 3 days Sept 1 3, 2014 795 Bolton/UK L 17-16 English 3 days Oct 6 8, 2014 795 Bolton/UK 112 113

2014 Seminars Course no. Title Language Duration Date Price/participant Location L 17-17 Cold-glue table machine English 3 days Nov 10 12, 2014 795 Bolton/UK L 17-18 English 3 days Dec 8 10, 2014 795 Bolton/UK L 17-19 English 3.5 days Feb 18 21, 2014 18,800 THB Bangkok/TH L 17-20 English 3.5 days Sept 1 4, 2014 18,800 THB Bangkok/TH L 17-21 English 5 days upon request upon request Johannesburg/ZA L 18-1 Cold-glue module machine German 4 days March 18 21, 2014 1,580 Neutraubling/DE L 18-2 German 4 days Nov 25 28, 2014 1,580 Neutraubling/DE L 18-3 English 4 days upon request upon request Neutraubling/DE L 18-4 English 3.5 days upon request upon request Franklin/US L 18-5 Spanish 3.5 days upon request upon request Franklin/US L 18-6 English 3 days Jan 27 29, 2014 795 Bolton/UK L 18-7 English 3 days Feb 24 26, 2014 795 Bolton/UK L 18-8 English 3 days March 24 26, 2014 795 Bolton/UK L 18-9 English 3 days April 28 30, 2014 795 Bolton/UK L 18-10 English 3 days May 19 21, 2014 795 Bolton/UK L 18-11 English 3 days June 23 25, 2014 795 Bolton/UK L 18-12 English 3 days Aug 18 20, 2014 795 Bolton/UK L 18-13 English 3 days Sept 15 17, 2014 795 Bolton/UK L 18-14 English 3 days Oct 27 29, 2014 795 Bolton/UK L 18-15 English 3 days Nov 24 26, 2014 795 Bolton/UK L 18-16 English 5 days upon request upon request Johannesburg/ZA L 19-1 Cold-glue labelling station German 2.5 days Feb 18 20, 2014 990 Neutraubling/DE L 19-2 German 2.5 days Sept 23 25, 2014 990 Neutraubling/DE L 19-3 English 2.5 days upon request upon request Neutraubling/DE Inspection technology I 01-1 Linatronic M2 Basic course German 4 days March 25 28, 2014 1,580 Neutraubling/DE I 01-2 German 4 days Oct 7 10, 2014 1,580 Neutraubling/DE I 01-3 English 4 days upon request upon request Neutraubling/DE I 02-1 Linatronic M2 Advanced course German 4 days Nov 25 28, 2014 1,580 Neutraubling/DE I 02-2 English 4 days upon request upon request Neutraubling/DE I 02-3 Chinese 3 days March 25 27, 2014 4,500 RMB Taicang/CN I 02-4 Chinese 3 days Sept 16 18, 2014 4,500 RMB Taicang/CN I 03-1 PET-View German 3 days upon request upon request Neutraubling/DE I 03-2 English 3 days upon request upon request Neutraubling/DE I 03-3 English 2 days upon request upon request Franklin/US I 05-1 Checkmat 731/752 German 3 days upon request upon request Neutraubling/DE I 05-2 English 3 days upon request upon request Neutraubling/DE I 05-3 English 2 days April 14 15, 2014 $ 1,098 Franklin/US I 05-4 English 2 days Dec 8 9, 2014 $ 1,098 Franklin/US I 05-5 English 3 days April 23 25, 2014 16,000 THB Bangkok/TH I 05-6 English 3 days Nov 3 5, 2014 16,000 THB Bangkok/TH I 05-7 Chinese 3 days May 13 15, 2014 4,500 RMB Taicang/CN I 05-8 Chinese 3 days Oct 28 30, 2014 4,500 RMB Taicang/CN 114 115

2014 Seminars Course no. Title Language Duration Date Price/participant Location I 06-1 Checkmat 707 German 1 day upon request upon request Neutraubling/DE I 06-2 English 1 day upon request upon request Neutraubling/DE I 06-3 English 2 days April 17 18, 2014 $ 1,098 Franklin/US I 06-4 English 2 days Dec 11 12, 2014 $ 1,098 Franklin/US I 06-5 English 2 days April 28 29, 2014 11,000 THB Bangkok/TH I 06-6 English 2 days Nov 6 7, 2014 11,000 THB Bangkok/TH I 07-1 Checkmat 707 with DART German 1 day upon request upon request Neutraubling/DE I 07-2 English 1 day upon request upon request Neutraubling/DE I 08-1 Modular Linatronic 735 Basic course German 5 days May 19 23, 2014 1,975 Neutraubling/DE I 08-2 German 5 days Nov 3 7, 2014 1,975 Neutraubling/DE I 08-3 English 5 days upon request upon request Neutraubling/DE I 09-1 Modular Linatronic 735 Advanced course German 5 days upon request upon request Neutraubling/DE I 09-2 English 5 days upon request upon request Neutraubling/DE Packaging and palletising technology D 01-1 Non-returnable packaging technology German 2 days upon request upon request Rosenheim/DE D 01-2 English 2 days upon request upon request Rosenheim/DE D 01-3 Spanish 2 days upon request upon request Rosenheim/DE D 01-4 French 2 days upon request upon request Rosenheim/DE D 01-5 Chinese 3 days April 22 24, 2014 4,500 RMB Taicang/CN D 01-6 Chinese 3 days Nov 4 6, 2014 4,500 RMB Taicang/CN D 02-1 Palletising technology German 2 days upon request upon request Rosenheim/DE D 02-2 English 2 days upon request upon request Rosenheim/DE D 02-3 Spanish 2 days upon request upon request Rosenheim/DE D 02-4 French 2 days upon request upon request Rosenheim/DE D 03-1 Packaging technology German 1 day upon request upon request Rosenheim/DE D 03-2 English 1 day upon request upon request Rosenheim/DE D 03-3 Spanish 1 day upon request upon request Rosenheim/DE D 03-4 French 1 day upon request upon request Rosenheim/DE D 04-1 Robobox and Modulpal German 3 days upon request upon request Rosenheim/DE D 04-2 English 3 days upon request upon request Rosenheim/DE D 05-1 Modulpal Returnable technology German 3 days upon request upon request Rosenheim/DE D 05-2 English 3 days upon request upon request Rosenheim/DE D 06-1 Modulpal Non-returnable technology German 3 days upon request upon request Rosenheim/DE D 06-2 English 3 days upon request upon request Rosenheim/DE D 07-1 Packaging and palletising technology innovations German 2 days upon request upon request Rosenheim/DE D 07-2 English 2 days upon request upon request Rosenheim/DE Electrotechnology E 01-1 krones electrical technology for mechanics German 2 days upon request upon request Neutraubling/DE E 01-2 English 2 days upon request upon request Neutraubling/DE E 01-3 English 2 days upon request upon request Franklin/US E 01-4 English 3 days upon request upon request Johannesburg/ZA 116 117

2014 Seminars Course no. Title Language Duration Date Price/participant Location E 01-5 krones electrical technology for mechanics English 3 days upon request upon request Lagos/NG E 01-6 English 3 days upon request upon request Nairobi/KE E 01-7 Spanish 3 days upon request upon request São Paulo/BR E 01-8 Portuguese 3 days Feb 17 19, 2014 1,185 São Paulo/BR E 01-9 Portuguese 3 days March 24 26, 2014 1,185 São Paulo/BR E 01-10 Portuguese 3 days May 21 23, 2014 1,185 São Paulo/BR E 01-11 Portuguese 3 days June 16 18, 2014 1,185 São Paulo/BR E 01-12 Portuguese 3 days Sept 10 12, 2014 1,185 São Paulo/BR E 01-13 Portuguese 3 days Nov 25 27, 2014 1,185 São Paulo/BR E 02-1 Contiform Electrical components German 2 days June 3 4, 2014 790 Neutraubling/DE E 02-2 English 2 days upon request upon request Neutraubling/DE E 02-3 English 4 days upon request upon request Franklin/US E 02-4 Chinese 3 days Nov 18 20, 2014 4,500 RMB Taicang/CN E 03-1 Filler Electrical system (LCT3/KFS3 controller) German 3 days upon request upon request Neutraubling/DE E 03-2 English 3 days upon request upon request Neutraubling/DE E 03-3 English 3 days upon request upon request Franklin/US E 03-4 English 3 days June 16 18, 2014 16,000 THB Bangkok/TH E 03-5 English 3 days Nov 24 26, 2014 16,000 THB Bangkok/TH E 04-1 Filler Electrical system (FVC controller) German 3 days upon request upon request Neutraubling/DE E 04-2 English 3 days upon request upon request Neutraubling/DE E 04-3 English 3 days June 6 8, 2014 16,000 THB Bangkok/TH E 04-4 English 3 days Nov 21 23, 2014 16,000 THB Bangkok/TH E 04-5 Spanish 3 days upon request upon request São Paulo/BR E 04-6 Portuguese 3 days Feb 5 7, 2014 1,185 São Paulo/BR E 04-7 Portuguese 3 days April 23 25, 2014 1,185 São Paulo/BR E 04-8 Portuguese 3 days June 18 20, 2014 1,185 São Paulo/BR E 04-9 Portuguese 3 days Aug 20 22, 2014 1,185 São Paulo/BR E 04-10 Portuguese 3 days Oct 22 24, 2014 1,185 São Paulo/BR E 04-11 Portuguese 3 days Dec 10 12, 2014 1,185 São Paulo/BR E 04-12 Chinese 3 days March 11 13, 2014 4,500 RMB Taicang/CN E 04-13 Chinese 3 days Dec 9 11, 2014 4,500 RMB Taicang/CN E 05-1 Cold glue labeller Electrical system German 2.5 days upon request upon request Neutraubling/DE E 05-2 English 2.5 days upon request upon request Neutraubling/DE E 05-3 English 2 days upon request upon request Franklin/US E 05-4 English 2 days April 21 22, 2014 11,000 THB Bangkok/TH E 05-5 English 2 days Sept 23 24, 2014 11,000 THB Bangkok/TH E 06-1 Contiroll and Contiroll HS (controllers B&R) El. system German 3.5 days upon request upon request Neutraubling/DE E 06-2 English 3.5 days upon request upon request Neutraubling/DE E 06-3 English 2 days Sept 25 26, 2014 $ 1,098 Franklin/US E 06-4 English 2 days Oct 7 8, 2014 $ 1,098 Franklin/US E 06-5 English 3 days Feb 3 5, 2014 16,000 THB Bangkok/TH E 06-6 English 3 days July 2 4, 2014 16,000 THB Bangkok/TH E 06-7 Chinese 3 days Oct 14 16, 2014 4,500 RMB Taicang/CN 118 119

2014 Seminars Course no. Title Language Duration Date Price/participant Location E 07-1 Contiroll 745 with LCT3 controller Electrical system German 3 days upon request upon request Neutraubling/DE E 07-2 English 3 days upon request upon request Neutraubling/DE E 07-3 English 3 days upon request upon request Franklin/US E 07-4 English 3 days Feb 10 12, 2014 16,000 THB Bangkok/TH E 07-5 English 3 days July 7 9, 2014 16,000 THB Bangkok/TH E 09-1 Modular labeller generation 2 Electrical system German 4 days Oct 14 17, 2014 1,580 Neutraubling/DE E 09-2 English 4 days upon request upon request Neutraubling/DE E 09-3 English 2 days upon request upon request Franklin/US E 11-1 Elec. comp. for packaging and palletising technology German 2 days upon request upon request Rosenheim/DE E 11-2 English 2 days upon request upon request Rosenheim/DE E 11-3 Chinese 3 days July 8 10, 2014 4,500 RMB Taicang/CN E 11-4 Chinese 3 days Sept 2 4, 2014 4,500 RMB Taicang/CN E 12-1 Basics of the krones electrical system English 10 days upon request upon request Johannesburg/ZA E 12-2 English 10 days upon request upon request Lagos/NG E 12-3 English 10 days upon request upon request Nairobi/KE E 14-1 General krones electrical system German 3 days upon request upon request Neutraubling/DE E 14-2 English 3 days upon request upon request Neutraubling/DE E 14-3 Chinese 3 days Dec 16 18, 2014 4,500 RMB Taicang/CN E 15-1 Electrical system training in the laboratory English 3.5 days upon request upon request Franklin/US E 15-2 Chinese 3 days Feb 25 27, 2014 4,500 RMB Taicang/CN E 15-3 Chinese 3 days Aug 26 28, 2014 4,500 RMB Taicang/CN E 16-1 AS-i-Bus Safety English 0.5 days upon request upon request Franklin/US Automation A 00-1 Automation Engineer (A 08 + A 10 + A 13 + A 14) English 8 days April 1 10, 2014 3,160 Neutraubling/DE A 00-2 English 8 days Nov 25 Dec 4, 2014 3,160 Neutraubling/DE A 00-3 English 8 days upon request upon request Franklin/US A 08-1 Siemens S7 for krones machines Basic course German 4 days Feb 4 7, 2014 1,580 Neutraubling/DE A 08-2 German 4 days May 6 9, 2014 1,580 Neutraubling/DE A 08-3 German 4 days Sept 23 26, 2014 1,580 Neutraubling/DE A 08-4 German 4 days Oct 21 24, 2014 1,580 Neutraubling/DE A 08-5 English 4 days upon request upon request Neutraubling/DE A 08-6 English 4 days once per month $ 2,396 Franklin/US A 08-7 English 4 days upon request upon request Johannesburg/ZA A 08-8 English 4 days upon request upon request Lagos/NG A 08-9 English 4 days upon request upon request Nairobi/KE A 08-10 English 4 days May 6 9, 2014 21,400 THB Bangkok/TH A 08-11 English 4 days Oct 6 9, 2014 21,400 THB Bangkok/TH A 09-1 Siemens S7 for krones machines Advanced course German 4 days June 24 27, 2014 1,580 Neutraubling/DE A 09-2 German 4 days Dec 9 12, 2014 1,580 Neutraubling/DE A 09-3 English 4 days upon request upon request Neutraubling/DE A 09-4 English 4 days once per month $ 2,396 Franklin/US A 09-5 English 4 days upon request upon request Johannesburg/ZA A 09-6 English 4 days upon request upon request Lagos/NG 120 121

2014 Seminars Course no. Title Language Duration Date Price/participant Location A 09-7 Siemens S7 for krones machines Advanced course English 4 days upon request upon request Nairobi/KE A 09-8 English 4 days May 14 17, 2014 21,400 THB Bangkok/TH A 09-9 English 4 days Oct 13 16, 2014 21,400 THB Bangkok/TH A 10-1 krones visualisation technology zenon software German 2 days Feb 18 19, 2014 790 Neutraubling/DE A 10-2 German 2 days April 28 29, 2014 790 Neutraubling/DE A 10-3 German 2 days Sept 30 Oct 1, 2014 790 Neutraubling/DE A 10-4 English 2 days upon request upon request Neutraubling/DE A 10-5 English 2 days once per month $ 1,198 Franklin/US A 10-6 English 2 days May 19 20, 2014 11,000 THB Bangkok/TH A 10-7 English 2 days Oct 10 11, 2014 11,000 THB Bangkok/TH A 11-1 zenon workshop: Emergency package installation German 0.5 days Feb 20, 2014 439 Neutraubling/DE A 11-2 German 0.5 days April 30, 2014 439 Neutraubling/DE A 11-3 German 0.5 days Oct 2, 2014 439 Neutraubling/DE A 11-4 English 0.5 days upon request upon request Neutraubling/DE A 11-5 English 0.5 days once per month $ 299 Franklin/US A 11-6 English 0.5 days May 23, 2014 2,700 THB Bangkok/TH A 11-7 English 0.5 days Oct 17, 2014 2,700 THB Bangkok/TH A 12-1 IT-system technology Basics German 2 days Feb 25 26, 2014 790 Neutraubling/DE A 12-2 English 2 days upon request upon request Neutraubling/DE A 12-3 English 2 days once per month $ 1,198 Franklin/US A 13-1 IT-system technology Workshop German 2 days Feb 27 28, 2014 790 Neutraubling/DE A 13-2 English 2 days upon request upon request Neutraubling/DE A 14-1 B&R Automation (electrical system) Workshop German 2 days May 27 28, 2014 790 Neutraubling/DE A 14-2 German 2 days Oct 28 29, 2014 790 Neutraubling/DE A 14-3 English 2 days upon request upon request Neutraubling/DE A 14-4 English 2 days once per month $ 1,198 Franklin/US A 14-5 English 2 days May 29 30, 2014 11,000 THB Bangkok/TH A 14-6 English 2 days Oct 20 21, 2014 11,000 THB Bangkok/TH A 15-1 Control technology ControlLogix and DeviceNet German 4 days upon request upon request Neutraubling/DE A 15-2 English 4 days upon request upon request Neutraubling/DE A 15-3 English 4 days upon request upon request Franklin/US A 16-1 krones Data Backup Solution (local/network) German 0.5 days Oct 30, 2014 359 Neutraubling/DE A 16-2 English 0.5 days upon request upon request Neutraubling/DE IT solutions IT 01-1 Recording and evaluating values with krones LDS German 2.5 days upon request upon request Neutraubling/DE IT 01-2 English 2.5 days upon request upon request Neutraubling/DE IT 01-3 English 2 days upon request upon request Franklin/US IT 02-1 SIPS Strategic maintenance and planning system German 2 days upon request upon request Neutraubling/DE IT 02-2 English 2 days upon request upon request Neutraubling/DE IT 02-3 English 3 days upon request upon request Franklin/US IT 03-1 Complete control of spare parts krones SPMS German 2 days upon request upon request Neutraubling/DE IT 03-2 English 2 days upon request upon request Neutraubling/DE IT 03-3 English 3 days upon request upon request Franklin/US 122 123

2014 Seminars Course no. Title Language Duration Date Price/participant Location IT 04-1 KAM krones Asset Management German 3 days upon request upon request Neutraubling/DE IT 04-2 English 3 days upon request upon request Neutraubling/DE IT 05-1 LMS Line Management System German 2.5 days upon request upon request Neutraubling/DE IT 05-2 English 2.5 days upon request upon request Neutraubling/DE IT 06-1 krones IT tools from inside Workshop for specialists German 2 days upon request upon request Neutraubling/DE IT 06-2 English 2 days upon request upon request Neutraubling/DE IT 07-1 Facts immediately on the table krones ReportKit German 1 day upon request upon request Neutraubling/DE IT 07-2 English 1 day upon request upon request Neutraubling/DE IT 08-1 krones Line Performance Analyser LPA Workshop German 1 day upon request upon request Neutraubling/DE IT 08-2 English 1 day upon request upon request Neutraubling/DE Management Training M 03-1 krones technology for career changers German 4 days May 5 8, 2014 2,380 Neutraubling/DE M 03-2 English 4 days Nov 17 20, 2014 2,380 Neutraubling/DE M 04-1 Packaging & palletising technology for career changers German 1 day May 9, 2014 595 Rosenheim/DE M 04-2 English 1 day Nov 21, 2014 595 Rosenheim/DE M 06-1 Train the trainer German 2 days upon request upon request Neutraubling/DE M 06-2 English 2 days upon request upon request Neutraubling/DE M 08-1 Maintenance management German 2 days upon request upon request Neutraubling/DE M 08-2 English 2 days upon request upon request Neutraubling/DE M 12-1 Aseptic filling and process technology German 2 days April 15 16, 2014 1,190 Neutraubling/DE M 12-2 English 2 days Nov 4 5, 2014 1,190 Neutraubling/DE M 16-1 Line efficiency 1 Analysis German 2 days Feb 4 5, 2014 1,190 Neutraubling/DE M 16-2 English 2 days Feb 25 26, 2014 1,190 Neutraubling/DE M 16-3 English 2 days Oct 21 22, 2014 $ 1,600 Franklin/US M 16-4 English 2 days Oct 23 24, 2014 $ 1,600 Franklin/US M 16-5 English 2.5 days upon request upon request Johannesburg/ZA M 16-6 English 2 days upon request upon request Bangkok/TH M 16-7 Portuguese 2 days upon request upon request São Paulo/BR M 17-1 Line efficiency 2 Optimisation German 2 days March 11 12, 2014 1,190 Neutraubling/DE M 17-2 English 2 days April 8 9, 2014 1,190 Neutraubling/DE M 18-1 Line efficiency 3 TPM and its implementation German 2 days Oct 7 8, 2014 1,190 Neutraubling/DE M 18-2 English 2 days Oct 13 14, 2014 1,190 Neutraubling/DE M 19-1 Aseptic Block Supervisor (in 3 modules) German 20 days upon request upon request Neutraubling/DE M 19-2 German 20 days upon request upon request Neutraubling/DE 124 125

Worldwide krones Academy addresses Europe Germany headquarters: Neutraubling incl. Flensburg and Rosenheim krones AG Böhmerwaldstraße 5 93073 Neutraubling Germany Phone +49 9401 70-6414 Valentina Fax +49 9401 70-916414 D Ascanio E-mail academy@krones.com Franklin Louvain-la-Neuve Bolton Neutraubling Taicang France/Belgium S.A. krones N.V. Rue de Bosquet, n 17 Parc Scientifique Einstein 1348 Louvain-la-Neuve Sud Phone +32 10 4807-15 Sabrina Fax +32 10 4807-22 Mahieu E-mail academy@krones.com Santa Fé de Bogotá São Paulo Lagos Bangkok Nairobi Johannesburg Africa Great Britain krones UK Ltd. Westregen House, Great Bank Road Wingates Industrial Park Westhoughton Bolton BL 5 3XB Phone +44 1942 8450-00 Gary Fax +44 1942 8450-91 Wintle E-mail academy@krones.com South Africa krones Southern Africa (Pty) Ltd. Stand 324/325, Avante Garde Avenue Northlands Deco Park, New Market Street North Riding, Randburg 2194 Johannesburg Phone +27 11 065 5700 Gavin Fax +27 86 555 9574 Bent E-mail academy@krones.com Kenya krones LCS Center East Africa Ltd P.O. Box 63674-00619 Ruaka Grove, Runda Estate Nairobi Phone +254 207122-763 Valerie Fax +254 207122-607 Oyugi E-mail academy@krones.com Nigeria krones LCS Center West Africa Ltd. Plot 7a Block C, Acme Road, Ogba, Ikeja, Lagos Remi Phone +234 1 46 311 30-146 Ajayi E-mail academy@krones.com Asia China krones Machinery Co. Ltd. No. 9, Ningbo East Road 215400 Taicang Phone +86 1391 1856742 Jun Fax +86 512 535727-76 Yang E-mail academy@krones.com Thailand krones (Thailand) Co. Ltd. 39 th Floor, TCIF Tower 1858/138 Bangna-Trad Road, Bangna Sub District, Bangna District, Bangkok 10260 Phone +66 2 7636-541 Piyaphan Fax +66 2 7636 502 Pladruen E-mail academy@krones.com 126 128

Worldwide krones Academy addresses America Brazil krones do Brasil Ltda. Av. Presidente Juscelino, 1140 09950-370 Diadema, São Paulo Phone +55 11 407 59 564 Ederson Fax +55 11 40759-800 De Campos E-mail academy@krones.com Training as requested Is a certain training topic missing? Or you would like to have our trainers come to your plant for an individual training course? No problem: We will be happy to create a custom-tailored training concept and carry it out for you at a location of your choice. Just ring us and we ll consider with you how we can best implement your requests, ideas and training objectives. Colombia/Venezuela krones Andina Ltd. Av. Calle 80 Nr. 69-70 Local 30 Santafé de Bogotá, D.C. Phone +57 1310-8748 Luis Rolando Fax +57 1310-8798 Vergel E-mail academy@krones.com Social Media krones uses social media for the exchange with business partners, employees, and everyone who is interested in the company and its products. You will find us here: USA krones INC. 9600 South 58 th Street Franklin, Wisconsin 53132-6241 Phone +1 414 409-4580 Frank Fax +1 414 409-4120 Kaczmarski E-mail academy@krones.com Internet: www.krones.com www.krones.com/en/academy.php Twitter: twitter.com/kronesag Facebook: facebook.com/kronesag facebook.com/kronesacademy YouTube: youtube.com/kronestv 130