ZA Smart TV Series QUICK START GUIDE
GETTING STARTED Unpacking your Television Ensure the following accessories are included in the box with your TV. Remote control and batteries (2 x AAA) Quick Start Guide Link to Full User Manual TV Stand and 5 x Screws Assembling your Stand For large TVs, we recommend having a second person assist you in safely removing the TV from the box. Ensure you have the following tools and cables available to get up and running as fast as possible. ~ Philips-head Screwdriver ~ Coaxial (RF) Cable Attaching the Stand With help from another person, remove the TV from the box and lay it face down on large flat surface. Attach the stand using the screws provided with a Philips-head screwdriver.
Positioning your TV Position your TV in it's final resting place. Remove all protective sleeves and plastic stickers from the TV. Ensure there is approximately 10cm of space around the TV for ventilation. Powering On Plug in the power cord and switch on the power. Check the hard power switch and make sure it is in the ON position. Power on the TV by pressing the Power button on the remote control. Tuning Channels Press the power button on the remote to turn on the TV. After a brief delay, you will be presented with a dialogue to help you automatically tune available channels.
Front Panel Overview The buttons on the lower-right hand panel control your TV's basic features, including the on-screen menu. To use more advanced features, you must use the remote control. 1. STANDBY BUTTON Press this button to toggle between ON and STANDBY modes. 2. VOLUME CONTROLS Press to increase or decrease the volume. Also used as left/right arrows in the on-screen menu. 3. PROGRAM CONTROL Press to change channels. Also used as up/down arrows in the on-screen menu. 4. MENU Press to see an on-screen menu of your Televisions features. 5. TV/AV Toggles between all available input sources. 6. REMOTE CONTROL SENSOR Aim the remote control towards this point on your television. 7. POWER INDICATOR Red: In STANDBY mode. Green: In power ON mode. 8. POWER SWITCH Press this to allow your television to use electricity to power up. Note: This button MUST be pressed for the television to work. 9. 3D SYNC SIGNAL EMITTER Sends out the sync signal for 3D shutter glasses.
SMART TV Application Features 1- Android 4.2 dual-core smart TV 2- Network Connection(Wired/Wireless/PPPOE/WLAN) 3- DLNA 4- Home Share 5- MHL 6- Application Installation 7- Google Play Store 8- USB 3.0 1. Android 4.2 Dual Core Smart TV Equipped with a dual-core processor, the latest CPU (1.2G) and a Mali400 Quad Core GPU, this Smart TV contains a robust system configuration designed to run the newest software applications. You can enjoy your favourite applications, downloads, internet content and human-computer interaction (such as Surfing the Web, SNS Social Network, Online Video Playback, Online Video Chat and creating a home entertainment centre between the TV and your portable devices.) This TV also has wireless Mouse and wireless Keyboard support when you plug the receiver into the USB port on the TV.
SMART TV Android 4.2 Launcher Introduction 1 Add to home screen. (Add apps to the home page) 2 All Apps 3 Change Wallpaper 4 Search 5 Settings 6 Mass Storage (USB/SD/TF) 7 Network (Wireless/WLAN) 8 Source Window (TV/DTV/ATV/AV/HDMI/YPbPr/VGA) 9 Application at home page. 10 Search 11 HOME page 12/13/14 Other pages
2. NETWORK CONNECTION (Wired/Wireless/PPPOE/WLAN HP) The instant network page gives you quick and easy access to information via the internet. CABLE NETWORK
WIRELESS NETWORK
PPPOE PPPOE is point-to-point protocol over ethernet. For detailed operations please contact your Internet Service Provider. WLAN HP (Hotspot)
3. DLNA DLNA is the Digital Living Network Alliance, which lets you enjoy your music, photos and videos anywhere, anytime. Note: 1 Make sure your devices (PC, Smartphone, ipad etc..) have a DLNA compatible program installed. 2 Ensure your devices and the TV is in the same local area network. 3 Share the video/music/picture on your devices via DLNA. OPERATION
4. HOME SHARE Easily browse the internet or receive data from your home smart devices. Your PC, NAS, Router with USB together with your TV creates a whole new home entertainment centre. To enjoy Home Share, you need to access the internet first. Please refer to wireless connection information to connect to your network. Operation
5. MHL MHL is Mobile High-Definition Link. It utilizes established connectors and features a single cable with a 5-pin interface. It supports 1080p HD video and digital audio, and simultaneously provides power to the mobile device. It also enables the TV remote control to control the mobile phone and access its contents. NOTE: MHL cable and a portable device that supports MHL is required for this function. MHL is only available for HDMI1 mode. Operation 6. APPLICATIONS INSTALLATION Note: You can download applications from the Google Play Store or from other online stores directly if your TV has these stores installed, or you can install applications from USB/SD/TF which contains the suitable.apk software. For USB/SD/TF installation:
7. GOOGLE PLAY STORE The Google Play Store is an online store for Google by Android devices. You can select your favourite from 450,000+ apps, millions of songs and books, plus thousands of movies. Note: Some applications you can download from the Google Play Store may not be compatible with this TV. Please check that the application is compatible with the TV. We suggest that you are best to install applications from the local app store. 8. USB 3.0 The newly upgraded USB 3.0 brings ultra-high bandwidth and high-speed transmission of data. The USB3 interface on the TV is for USB 3.0 usage.