SPECIFICATIONS Super Model: XHS-220S1 Class Solar Simulator 1. Introduction 2. Components 3. Optical Specifications 4. Electric Specifications 5. Dimension 6. Operating Environment 7. Warranty SAN-EI ELECTRIC CO., LTD 533-0006 3-19-50, KAMISHINJO, HIGASHIYODOGAWA-KU, OSAKA, JAPAN TEL 06-6379-0010 FAX 06-6379-0070 April-2013
1. Introduction This super AAA class solar simulator is designed for 8inch cell (effective irradiated area 220mm). By an innovative optical design, this Solar Simulator presents a mixing light from Halogen Lamp and Xenon Lamp, which can mostly fit the real sunlight. And the spectral mismatch within ±5% (JIS C 8942 MS class) is possible. By using the finest optical components and feedback control technology all of optical specifications certified much better than class AAA (JIS C 8912 / IEC 60904-9 (2007) / ASTM E927-5). System Configuration Model Light Source Unit Size Weight Power Supply Size (with rack) Weight (with rack) XHS-220S1 XHS-2350T1 W520 H1069 D1045 mm 90kg XHC-2350M1 W544 H900 D660 mm 52kg Filter AM 1.5G Lamp Accessories 1.6kw Xenon Lamp & 750w Halogen Lamp Power Input Cable (3.5sq, triplex, with earth terminal) Halogen Power Input Cable (triplex) Xenon Power Cable (duplex) Halogen Power Cable (duplex) Shutter Cable (triplex) Inter-lock/Fan Motor Cable (14 core) Feedback Signal Cable (7 core) Remote Control Cable A (30 core flat cable) Operation Manual - 2 -
2. Components Shutter Unit Output Adjustment Lamp Output Display Cooling Fan Motor Interlock Overheat Prevention Mechanism Lamp Hour Meter Optical Axis Adjustment Mechanism Feedback Control External Control Monitoring Functions Manual or timer controlled (0.1 S ~ 9990 Hrs) By changing the current lamp power(60~100%) Indicating Xenon Lamp Power, Current, Voltage Indicating Halogen Lamp Current, Voltage Auto-stop after the lamp extinguished over 20 minutes Lamp shutoff automatically when the lamp exchange door is open 80 C thermostat inside light source unit. 80 C thermostat inside power supply unit. Indicating operation time of lamp (with lifetime alarm) X-axis, Y-axis, Z-axis adjustment knob, Arc Monitor Constantly control irradiance of solar simulator with a feedback system, which inside power supply. *Power input signals *Lamp on/off input and output signals *Manual shutter opening input signals *Shutter timer start input signals *Shutter open confirmation output signals *Shutter closed confirmation output signals *Lamp on confirmation output signals *Lamp stability indicator output signals *Light source over-heat alarm output signals *Power supply over-heat alarm output signals (Xenon/Halogen) *Inter-lock alarm output signals *Lamp life time over alarm output signals - 3 -
3. Optical Specifications Effective Irradiated Area AM filter Irradiance Irradiation Distance Temporal Instability of Irradiance Irradiance Uniformity Spectral Mismatch Lamp Life Time 220mm AM1.5G 1,000W/m2 (1 SUN) 470mm <±1% (JIS C 8912/IEC/ASTM Class A, JIS C 8942: 2009 Class MS) <±2% (JIS C 8912/IEC/ASTM Class A, JIS C 8942: 2009 Class MS) AM 1.5G <±5% (JIS C 8912/IEC/ASTM Class A) (JIS C 8942: 2009 Class MS) Xenon lamp: average 1,000h Halogen lamp: average 300h JIS C 8942 (Solar simulator for multi-junction solar cells and modules) Item Classification MS MA B C Non-uniformity Less than Less than Less than Less than of Irradiance ±2% ±2% ±3% ±10% Temporal Instability Less than Less than Less than Less than of Irradiance ±1% ±1% ±3% ±10% Spectral Mismatch 0.95-1.05 0.75 1.25 0.60 1.40 0.40 2.00 4. Electric Specifications Rated Input Rated Lamp Voltage Insulation Resistance Voltage Endurance AC200-240V (±10%) 50/60Hz 1φ 3.6kVA (MAX) Xenon lamp: 1600W Halogen lamp: 750W DC 500V above 20MΩ Input~Output / Output between F.G~between F.G Output~between F.G Input ~ Output between F.G AC 1,000 V 1 minute Output ~ between FG AC 500 V 1 minute - 4 -
5. Dimension A. Light Source Unit: XES-2350T1-5 -
B. Power Supply Unit: XEC-2350M1+ Rack - 6 -
6. Operating Environment Temperature 5~35 (RT value, temperature change within 5 ) Humidity 20 ~85% (RH value, No Condensation) 7. Warranty Warranty period covers one year after delivery with a service time (accumulated lamp lighting time) less than 1,000 hours. Should incident or malfunctioning occur due to design or manufacturing defects of our company within the above mentioned warranty period, compensation is provided for repair or replacement of the malfunctioning parts only. Please clearly indicate the details of the claimed malfunctions and ship the device to our company. The warranty does not cover the following items: 1) Accidents or malfunctions occur as a result of wrongful usages not covered in this manual. 2) Malfunction or accidents resulted from modification unauthorized by SAN-EI electric Co., Ltd. 3) Malfunction or secondary damages from natural or man-made calamities. 4) Damage compensations for accidents or malfunction. 5) Damage compensations for patent infringement by users operating this device. - 7 -