Product End-of-Life Instructions Product Range: Thalassa PHD Marketing Model/Name: (List of multiple models if applicable) NSYPHDZT12126 NSYPHDT553 NSYPHDT753 NSYPHDZT774 NSYPHDZT776 NSYPHDZT1054 NSYPHDZT1074 NSYPHDZT1254 NSYPHDZT1274 NSYPHDZT1276 NSYPHDZT12124 NSYPHDZT1574 NSYPHDZT1576 NSYPHDZT15124 NSYPHDZT15126 NSYPHDZT2074 NSYPHDT553P NSYPHDT753P NSYPHDZT774P NSYPHDZT776P NSYPHDZT1054P NSYPHDZT1074P NSYPHDZT1254P NSYPHDZT1274P NSYPHDZT1276P NSYPHDZT12124P NSYPHDZT12126P NSYPHDZT1574P NSYPHDZT1576P NSYPHDZT15124P NSYPHDZT15126P NSYPHDZT2074P NSYPLHD NSYFMPHD NSYPCVR74HD NSYPCVR76HD NSYPCVR54HD NSYPCVR124HD NSYPCVR126HD NSYZZ274VHD NSYZZ276VHD NSYZZ254VHD NSYZZ2124VHD NSYZZ2126VHD NSYBGN774HD NSYBGN776HD NSYBGN1054HD NSYBGN1074HD NSYBGN1254HD NSYBGN1274HD NSYBGN1276HD NSYBGN12124HD NSYBGN12126HD NSYBGN1574HD NSYBGN1576HD NSYBGN15124HD NSYBGN15126HD NSYBGN2074HD NSYPPC54HD NSYPPC56HD NSYPPC74HD NSYPPC76HD NSYMF2PLAZ4 NSYMF2PLAZ6 Purpose: The product family must be disposed according to the legislation of the country. This document is intended for use by end of life recyclers or treatment facilities. It provides the basic information to assure an appropriate end of life treatment for the components and materials of the product. of Note : This product family is in the scope of EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE). EoLI-Drafting template_env TT03_V3_20100606 Page 1 of 6
1250 x 1343 x 620 mm 110 kg EoLI-Drafting template_env TT03_V3_20100606 Page 2 of 6
Operations recommended for the end of life treatment There are several steps to process the products at the end of life so as to recover components, materials or energy : Reuse Separation for special treament Other dismantling Shredding. The components of the products that optimize the recycling performances are listed, identified and located hereunder. Components for shredding : MARCO POLIESTER PPC 1250X620 3mm COMP. PLA CANTONERA 600 CASQUILLO DODGE FLANGE M-6 COMP.PLA TRAVESAÑO 1250 Ant Der 7035 COMP.PLA TRAVESAÑO 1250 Pos. Izq.R7035 LATERAL PLA 126 REFOR. ROVING MONTANTE PLA-1250 Nu47 R7035 PANEL PLA-125 ANTIAF. ESPUMADA + ROVING PANEL PLA-127 ANTIAF. ESPUMADA + ROVING COMP. PLA SUP/INF 126 TROQ. NOE TEJADILLO PLA-126 SOPORTE RETEN.120u PIEZA FIJACION FONDO PLA PIEZA FIJ.FONDO-MONTANTE REFUERZO LAT. ZOCALO 620 REFUERZO CENTRAL 620 mm REFUERZO 1250 PU/PLA MECANIZADO 2001-S92-02 ENGAN.FALL. RAL7035 CONJUNTO FALLEBA 2001-SU 88-01 MANETA CANDADO PPC ESPUMADA ALUMINIO 2mm 500X620 PPC ESPUMADA ALUMINIO 2mm 750X620 SOPORTE CENTRAL PLACA PASA-CABLE PLETINA RETEN.120u NOE BISAGRA PLA 120º ZNbl13+Org.Min. CONTRABIS.PLA 120º ZNbl13+Org.Min. PASADOR BISAGRA ACERO ZnBl-13 +org.min. RET. PASADOR 108 INF. RAL7035 Disassemble and subdivide the internal units to carry out a diverse collection for the recovery of materials (steel, copper, aluminum, plastic, etc...) In all cases, take into account the existing regulations in the country where it is being used. EoLI-Drafting template_env TT03_V2_20090602 Page 3 of 6
Visual Location Identification and location plan of particular components of representative product TEJADILLO PLA-126 COMP. PLA SUP/INF 126 TROQ. NOE REFUERZO 1250 PU/PLA MECANIZADO PANEL PLA-125 ANTIAF. ESPUMADA + ROVING MONTANTE PLA-1250 Nu47 R7035 PANEL PLA-127 ANTIAF. ESPUMADA + ROVING CONJUNTO FALLEBA EoLI-Drafting template_env TT03_V2_20090602 Page 4 of 6
PPC ESPUMADA ALUMINIO 2mm 500X620 COMP. PLA CANTONERA 600 COMP.PLA TRAVESAÑO 1250 Pos. Izq.R7035 MARCO POLIESTER PPC 1250X620 3mm COMP.PLA TRAVESAÑO 1250 Ant Der 7035 RET. PASADOR 108 INF./SUP RAL7035 SOPORTE RETEN.120u CASQUILLO DODGE FLANGE M-6 PASADOR BISAGRA ACERO ZnBl-13 +org.min. PLETINA RETEN.120u NOE CONTRABIS.PLA 120º ZNbl13+Org.Min. BISAGRA PLA 120º ZNbl13+Org.Min. EoLI-Drafting template_env TT03_V2_20090602 Page 5 of 6
PIEZA FIJACION FONDO PLA PIEZA FIJ.FONDO- MONTANTE SOPORTE CENTRAL PLACA PASA-CABLE 2001-SU 88-01 MANETA CANDADO REFUERZO LAT. ZOCALO 620 2001-S92-02 ENGAN.FALL. RAL7035 PPC ESPUMADA ALUMINIO 2mm 750X620 Schneider Electric SA 43-45, boulevard Franklin Roosevelt F-92500 Rueil-Malmaison Cedex (France) The version of the Guide used to create the document: End of Life Tel.: +33 (0) 1 41 29 70 00 Instruction Drafting Guide of Schneider Electric version VX www.schneider-electric.com ENVEOLI1408007_V1 Publication date : xx/xx/xxxx EoLI-Drafting template_env TT03_V2_20090602 Page 6 of 6