Technical Description R 992 litronic` Hydraulic Excavator Operating weight with backhoe attachment 138,8 143,0 t Operating weight with shovel attachment 141,2 146,3t Engine output 575 kw/782 HP Bucket capacity 3,70 to 9,50 m 3 Shovel capacity 7,00 to 12,00 m 3 litronic` the total system comprised of intelligent electronics and functional hydraulics controls, regulates and coordinates all key systems of the excavator. Powerful turbo-charged and after-cooled 12 cylinder diesel engine, with direct injection and low operating RPM. Productive optimum utilization of available engine output via electronic engine speed sensing pump regulation. Increased work speed through pump flow summation. Operating safety the electronic engine-speed-sensing control protects the engine from overload. Pressure and flow compensation eliminate unnecessary oil circulation and consequently avoid excess heat as well as component wear. Comfortable large well equipped, air conditioner and sound insulated cab. Seat and joystick console independently adjustable to individual operator s size and weight. Environmentally sound lownoiseandexhaustemission. Optional: Bio degradable oil. Easy service clear and easy access to all components. Large catwalks, steps and platforms. Sealed attachment pivots, central lubrication system and extended service intervals reduce maintenance costs. Versatile different lengths of gooseneck booms, assortment of sticks and an extensive variety of buckets, bottom dump shovels and grapples provide application versatility. Economical the combination of all the above, results in top performance at low operating costs. This is litronic`. FTheBetterMachine.
Engine Cummins diesel engine Rating per DIN/ISO 3046-1 Model VTA 28 C 800 Type Displacement Bore/Stroke Air cleaner Fuel tank Electrical system Voltage Batteries Alternator Engine idling Air system 575 kw/782 HP at 1900 RPM reduced to 492 kw/668 HP at 1800 RPM 12 cylinder V-engine, water-cooled, direct injection, turbo-charged, after-cooled 28 l 140/152 mm dry-type air cleaner with automatically dust ejector, primary and safety elements 1780 l Hydraulic System Hydraulic pumps for attachment and travel drive Max. flow Max. hydraulic pressure Pump regulation Hydraulic pump for swing drive Max. flow Max. hydraulic pressure Hydraulic tank pressurization Hydraulic tank capacity Hydraulic system capacity Hydraulic oil filter Hydraulic oil cooler Electronic engine speed sensing Lubrication Servo circuit 24 V 2x170Ah/12V 24 V/75 Amp sensor controlled 1cylinder compressor, maintenance-free, pressure regulator, anti-freeze pump 3 variable flow axial piston pumps 2x555l/min+1x318l/min 320 bar Electro-hydraulic, pressure compensation, flow compensation, automatic oil flow optimizer 1reversible swash plate pump, closed-loop circuit 450 l/min 340 bar Hydraulic Controls Emergency control Power distribution Flow summation Control functions Attachment and swing Travel Additional functions 0,5 bar 1380 l 2190 l 1full flow filter in return line, 1high pressure filter for each main pump 2 separate coolers thermostatically regulated fan at rated engine speed setting central lubrication system Independant, electric over hydraulic proportional controls of each function via accumulator for attachment functions with stopped engine via 3 monoblock control valves with integrated primary and flanged-on secondary relief valves to attachment, hoist, stick and bucket cylinders and travel drive proportional via joystick levers proportional via foot pedals or hand levers for all travel functions via foot pedals or joystick toggle switch Swing Drive Hydraulic motor Gear Swing ring Swing speed Swing torque Swing-Holding brake Design Uppercarriage Attachment mounting Catwalks Design Operator s Cab Operator s seat Option Controls Monitoring Acoustical and optical signal Optical signal Heating system/ air conditioning Liebherr axial piston motor Liebherr planetary reduction gear Liebherr, sealed triple roller swing ring, internal teeth 0 5,6 RPM 415 knm air-over hydraulic multi-disc brakes, maintenance-free torque resistant modular design upper frame parallel length girders on both sides of the upper resiliently mounted, sound insulated, large windows for 360 h visibility, integrated falling object protection (FOPS) suspended, body-contoured with shock absorber, adjustable to operator s weight additional training seat joystick levers integrated into armrest of seat via LED Display in case of low engine oil pressure or low coolant level. Automatic engine shut of in case of engine overheating or low hydraulic oil level. Destroking of main pumps heavy duty, high output air conditioner and heater unit Noise emission inside cab = 78 db(a) (86/662/EWG) outside = 116 db(a) Undercarriage Hydraulic motor Axial piston motor Travel gear Liebherr planetary reduction gear Travel speed 0 3,1km/h Drawbar pull 886 kn Parking brake hydraulically actuated wet multi-disc brakes, maintenance-free Hydraulic brake valve integrated in main valve block Track components B 10 S, maintenance-free Track rollers/ carrier rollers 9/2 Track pads Forged double grouser Track chain adjustment hydraulic Transport undercarriage side frames are removable Attachment Design box-type, welded structures with large cast steel components Pivots sealed and lubricated Pivots bucket-to-stick bucket-to-link O-ring sealed and completely enclosed Lubrication connected to the centralized lubrication system Hydraulic cylinder Liebherr manufactured cylinders, sealed sherical, self aligning bearings, hydraulic piston cushioning Hydraulic connections pipes and hoses equipped with SAE split-flange connections Bucket with lifting eye 50 t Technical Data 2
mm A 4200 A1 4700 A2 5825 C 6280 D 4915 D1 5035 E 3973 K 1893 L 5407 X 3200 M 6962 mm P 1832 Q 806 T 8253 W 4500 N 600 800 B 5300 5300 G 5585 C1 6350 T1 10850 T2 15300 mm A 4200 A1 4700 A2 5825 C 6280 D 4915 D1 5035 E 3973 K 1893 L 5407 X 3200 M 6962 mm P 1830 Q 805 T 8253 W 4500 N 600 800 B 5300 5300 G 5525 5525 C1 4850 T1 12700 T2 16000 Dimensions 3
Diesel engine The heavy duty, water-cooled, turbo-charged and aftercooled Cummins Diesel engine delivers superior power and high power reserves. Its low operating speed results in lower fuel consumption, reduced emissions and an extended engine life. The enclosed engine compartment is easily accessible through full sized, easy to open doors and permits walk in access to all components for easy service. Litronic-System The electronic engine-speed-sensing pump regulation allows full utilization of the engines available output, independent from external influences. The variable displacement axial piston pumps are fitted with an electro-hydraulic regulator which reacts in fractions of a second to the changing requirements of power or speed. Flow compensation reduces pump flow to a minimum when joystick levers are in neutral, avoiding excess heat and energy loss. The same effect is achieved with pressure compensation which minimizes pump flow prior to reaching maximum operating pressure. An automatic oil flow optimizer assures efficient power distribution to each individual function. The operators comfort and efficiency is enhanced by the LED display and monitoring system. It monitors all vital machine functions and includes a variety of automatic safety features. The Litronic system offers extensive customer benefits, such as improved efficiency, reduced fuel consumption and overall economy. Undercarriage An overall low center of gravity for the machine is achieved through favorable weight distribution of the machine s undercarriage, upper structure and attachment. This low center of gravity, combined with a wide undercarriage base, provides excellent stability for smooth, precise work and efficient transmission of the high dig and breakout forces. It also increase the life expectancy of undercarriage components. Standard bolt-ontrackchainguidesoneachsideframeprotect and improve the life expectancy of track components. The two side frames are removable for easy transportation. Carbody and side frames are connected with a unique hook and key design, which shortens and simplifies assembly. More Benefits Through Advanced Techno 4
Cab The raised, spacious and comfortable cab features oversized, tinted windows and offers an excellent view of the trucks being loaded and general all-around visibility. The comfortable, air suspended and shock absorbed seat is adjustable to each individual operators size and weight. An air conditioner, integrated into the cab roof, is standard and increases operator comfort even in the most adverse conditions. A falling object protective structure (FOPS) is integrated into the roof. The control and instrument panel is within easy view of the operator. Service and control indicators, combined in a display screen, conveniently and continuously informs the operator, via symbols, of all machine functions. Effortless and precise joystick levers are comfortably integrated into the seat console. Attachments Strict use of fine grain alloy steel plates, true hollow box structures and large size cast steel components in high stress areas result in strong attachments with high availability and long life expectancy. Widely spaced pivots in the attachment allow the use of two short, large diameter, hardened and chromed pins and low wear, high alloy steel bushings. Completely sealed, floating pins and bushings increase lubrication intervals and attachment availability. Shovel and backhoe buckets are especially strong and wear resistant. The optimized bucket shape achieves a faster and higher degree of fill. A number of different length sticks, booms and various size buckets allow the machine to be tailored to all types of materials and applications. Swing Drive Swing acceleration of the upper carriage is accomplished via an axial piston motor flanged to a Liebherr planetary reduction gear. The swing pump and swing motors are linked in an independent closed-loop circuit. This system produces high swing torque, fast swing accelerations and deceleration, requires less power and shortens cycle times. The high swing torque created by the Liebherr planetary reduction gear, is transmitted to the Liebherr swing ring which features internal teeth for maximum protection from external damage and contamination. The swing operation is independent from all other travel and attachment functions. logy 5
To order a complet machine you need the following: Id. No. x Basic machine and track pads see page 12 x Hoist cylinders 9327202 x Gooseneck boom 8,00 m 9377146 x Stick with bucket cylinder 3,65 m 9377203 x Bucket size as applicable see below Max. reach at ground level Max. teeth height Max. dump height Max. digging depth 14,40 m 15,20 m 9,90 m 8,30 m Buckets Max. digging force: 512 kn (52,2 t) Max. breakout force: 640 kn (65,2 t) Cutting width SAE mm 2000 1) 2200 1) 2450 2) 2650 2) 2900 3) Capacity SAE heaped m 3 5,70 6,50 7,50 8,50 9,50 Weight kg 6900 7600 7000 7200 6900 Id. No. 9355834 9357602 9355835 9355837 9355836 Suitable for material up to a specific weight of t/m 3 2,40 2,20 2,00 1,80 1,50 1) Heavy duty rock bucket with teeth size 86 (SD) 2) Bucket with teeth size 76 (FP) 3) Loading bucket with teeth size 76 (FP) Backhoe Attachment with Gooseneck Boom 8,00 m 6
To order a complete machine you need the following: Id. No. x Basic machine and track pads seepage12 x Hoist cylinders 9327202 x Gooseneck boom 9,40 m 9322569 x Stick with bucket cylinder3,65 m 9377203 5,15 m 9332575 x Bucket size as applicable see below Digging envelope 1Stick 3,65 m 2 Stick 5,15 m Stick length m 3,65 5,15 Max. reach at ground level m 15,90 17,40 Max. teeth height m 16,20 17,10 Max. dump height m 10,90 11,80 Max. digging depth m 9,50 11,00 Buckets Max. digging force: 512 kn (52,2 t) Max. breakout force: 640 kn (65,2 t) Cutting width SAE mm 1650 1) 1850 1) 2000 2) 2200 2) Capacity SAE heaped m 3 3,70 4,50 5,70 6,50 Weight kg 5500 6000 6900 7600 Id. No. 9333517 9333518 9355834 9357602 Suitable for material up to a specific weight of 1) Bucket with teeth size 76 (FP) 2) Heavy duty rock bucket with teeth size 86 (SD) with Stick 3,65 m t/m 3 2,20 1,80 1,50 with Stick 5,15 m t/m 3 2,20 1,80 1,50 Backhoe Attachment with Gooseneck Boom 9,40 m 7
To order a complete machine you need the following: Id. No. x Basic machine see page 12 x Extra hydraulic controls for bottom dump bucket 9579465 x Hoist cylinders 9327202 x x Shovel boom with crowd cylinder 9358879 Shovel stick with bucket cylidners 9358878 x Bottom dump bucket size as applicable see below Max. reach at ground level Max. dump height 45h Max. crowd length Bucket opening width F 10,80 m 10,00 m 4,30 m 2110 mm Buckets Crowd force at ground level: 705 kn (71,8 t) Max. crowd force: 900 kn (91,7 t) Max. breakout force: 700 kn (71,3 t) Cutting width SAE mm 2650 1) 3050 2) 3050 2) 3050 2) 3350 3) Capacity SAE heaped m 3 7,00 8,60 9,20 10,00 12,00 Weight kg 11500 11400 12000 14000 11800 Id. No. 93680419368039 9368044 9368042 9329783 Suitable for material up to a specific weight of t/m 3 2,60 2,20 2,00 1,80 1,40 1) Bottom dump bucket with Delta cutting edge and teeth size 86 (LP) 2) Bottom dump bucket with Delta cutting edge and teeth size 76 (LP) 3) Coal bottom dump bucket with straight spade nose and teeth size 66 (FP) Shovel attachment 8
Cab L Length mm 3400 H Height mm 2800 Width mm 1700 Weight kg 2000 Cab elevation L Length mm 2460 H Height mm 1325 Width mm 1700 Weight kg 1100 Upper with swing ring L Length mm 6960 H Height mm 2160 Width mm 3650 Weight kg 29200 Counterweight L Length mm 675 H Height mm 2080 Width mm 4960 Weight kg 18800 Fuel Tank (one) L Length mm 1330 H Height mm 1185 Width mm 1180 Weight kg 900 Hydraulic oil cooling unit (one) 1 L Length mm 91 0 H Height mm 1185 Width mm 1285 Weight kg 800 Side panel (one) L Length mm 545 H Height mm 1900 Width mm 1660 Weight kg 320 Catwalk right L Length mm 5470 H Height mm 270 Width mm 520 Weight kg 200 Dimensions and Weights 9
Catwalk left L Length mm 2850 H Height mm 270 Width mm 520 Weight kg 110 Catwalk for cab lateral1) back2) L Length mm 3360 550 H Height mm 410 350 Width mm 410 510 Weight kg 130 30 Railing (1kit) L Length mm 2100 H Height mm 1500 Width mm 1000 Weight kg 230 Undercarriage central girder L Length mm 3060 H Height mm 1890 Width mm 3700 Weight kg 10200 Side frame with complete travel drive (each) Track pads mm 600 800 L Length mm 6962 6962 H Height mm 1830 1830 Width mm 1215 1215 Weight kg 21600 23150 Ladder (one each) Cab1) Undercarriage2) L Length mm 600 180 H Height mm 2930 1330 Width mm 550 925 Weight kg 50 2 x 80 Hoist cylinder (two) L Length mm 3550 l Diameter mm 380 Weight kg 2 x 1500 Gooseneck boom with stick cylinders Length mm 8000 9400 L Length mm 8500 9900 H Height mm 3000 3200 Width mm 1550 1550 Weight kg 13000 14000 Dimensions and Weights 10
Stick with bucket cylinders, link and lever Length mm 3650 5150 L Length mm 5000 7000 H Height mm 2300 2200 Width mm 1100 1100 Weight kg 8500 9200 Backhoe buckets Cutting width mm 1450 1650 1850 2000 Capacities m3 3,00 3,70 4,50 5,70 L Length mm 3000 3000 3000 3000 H Height mm 1750 1750 1750 2100 Width mm 1450 1650 1850 2000 Weight kg 4300 4900 5100 6000 Backhoe buckets Cutting width mm 2200 2450 2650 2900 Capacities m3 6,50 7,50 8,50 9,50 L Length mm 3000 3000 3000 3100 H Height mm 2100 2100 2100 2100 Width mm 2200 2450 2650 2900 Weight kg 6700 6800 7000 7200 Shovel boom with two crowd cylidners L Length mm 5540 H Height mm 1550 Width mm 1550 Weight without cylidners kg 9400 Weight of crowd cylidners kg 2 x 800 Shovel stick L Length mm 4100 H Height mm 1250 Width mm 1750 Weight kg 5800 Bucket tilt cylidners (two) L Length mm 3390 l Diameter mm 285 Weight kg 2 x 950 Bottom dump buckets Cutting width mm 2650 3050 3050 3050 3350 Capacity SAE m3 7,00 8,60 9,20 10,00 12,00 L Length mm 2500 2500 2900 3200 2700 H Height mm 2700 2700 2900 2900 2900 Width mm 2650 3050 3050 3050 3350 Weight kg 10800 11400 12000 14000 11800 Dimensions and Weights 11
Basic Machine Contents x x Id. No. Basic machine R 992 litronic` HD-undercarriage 0001053 Double grouser pads 600 mm 9373196 800 mm 9373197 Operating Weight and Ground Pressure With backhoe attachment 8,00 m with 600 mm pads: with 800 mm pads: 139000 kg 1,95 kg/cm2 142000 kg 1,49 kg/cm2 The operating weight includes the basic machine with backhoe attachment, 8,00 m gooseneck boom, 3,65 m stick and 8,50 m3 bucket. With backhoe attachment 9,40 m with 600 mm pads: with 800 mm pads: 138800 kg 1,95 kg/cm2 141800 kg 1,49 kg/cm2 The operating weight includes the basic machine with backhoe attachment, 9,40 m, gooseneck boom, 5,15 m stick and 4,50 m3 bucket. With shovel attachment with 600 mm pads: with 800 mm pads: 143200 kg 2,00 kg/cm2 146300 kg 1,54 kg/cm2 The operating weight includes the basic machine with shovel attachment and bottom dump bucket 10,00 m3. LFR/SP 8410685-2-03.95 Printed in Germany by Gagstatter. Illustrations and data may differ from standard equipment. Subject to change without notice. LIEBHERR-FRANCE S.A. 2, Avenue Joseph Rey, B.P. 287, F-68005 Colmar-Cedex, ç 0389213510, Fax 0389213793 www.liebherr.com, E-Mail: infoølfr.liebherr.com With compliments: