Cisco 7 Series Product Overview Cisco 7 series routers are designed for today s most mission-critical internetworks because they combine Cisco Systems proven software technology with reliability, availability, serviceability and exceptional performance features. Cisco 7 series provides information system professionals with the flexibility they need to meet the constantly changing requirements at the core and distribution points of their internetworks. Cisco 7 series includes the following models: Cisco 7 Cisco 7 Cisco 76. Cisco 7 routers provide routing and bridging for a wide variety of protocols and network media. Port and Service adapters are connected to PCI buses (peripheral component interconnect) on Cisco 7 routers, enabling connection to external networks. Cisco 7 series supports any combination of Ethernet, Fast Ethernet, Token Ring, FDDI, ATM, serial, ISDN, and HSSI interfaces. For detailed information about port adapters, see the Port Adapters and Service Adapters for the Cisco 7 Family chapter. Cisco 7 series routers run the industry-leading Cisco IOS networking software, which assures robust, reliable internetworks by supporting both LAN and WAN protocols; provides optimized network services including security, quality of service, and traffic management; and enables centralized, integrated, and automated internetwork installation and management. Cisco 7 series offers IOS feature sets that can be customized as well as upgraded to meet changing requirements. Key Features and Benefits Online software reconfiguration. Cisco 7 series routers allow software configuration changes to occur without rebooting or interrupting network applications and services. Online insertion and removal (OIR) of port adapters and service adapters. Cisco 7 series routers automatically reconfigure like-port adapters, which enables seamless upgrades to higher density and new port adapters without the need for rebooting, taking the system offline, or operator intervention. Fast boot. Cisco 7 series routers come online quickly after software upgrades (5 seconds is typical), minimizing the impact on your network. Environmental monitoring. Cisco 7 series routers alert you when potentially problematic system fluctuations occur before they become critical, thereby enabling resolution while the system remains online. Self-diagnostics and tools. Cisco 7 series routers perform self-tests to ensure all modules are operational before going online, to avoid potential network problems at the outset. Optional dual power supply systems, AC- or DC-input. Cisco 7 series routers extend individual power supplies by load sharing. Flash memory. Cisco 7 series routers enable fast, reliable software and microcode updates, which allows internetwork management from a single, centralized location, and eliminates the need for physically visiting each router site when updating software or microcode.
5 TD TC RD RC LB CD TD TC ETHERNET-BFL 6 Figure 5-5: Cisco 7 Front View Port adapters Cisco 7 SERIES ABLED CELLS CARRIER ALARM 55-SMI CLASS PRODUCT LASERPRODUKT DER KLASSE PROUIT LASER DE CLASSE PRODUCTO LASER CLASS HANCED ATM Port adapter lever ABLED PCMCIA EJECT SLOT SLOT CPU RESET O POWER OK FAST ETHERNET INPUT/OUTPUT CONTROLLER 6 I/O controller PCMCIA slots Auxiliary port Console port Figure 5-6: Cisco 7 Front View Port adapters Cisco 7 SERIES ABLED MII LINK RJ5 FAST ETHERNET SERIAL-EIA/TIA- ETHERNET-BFL 5 6 7 Port adapter lever ABLED PCMCIA EJECT SLOT SLOT FE MII MII RJ5 RJ5 LINK RJ-5 O PWR OK CPU RESET FAST ETHERNET INPUT/OUTPUT CONTROLLER H798 I/O controller PCMCIA slots Optional Fast Ethernet port (MII receptacle and RJ-5 receptacle) Auxiliary port Console port Figure 5-7: Cisco 76 Front View Port adapters TOK RING ABLED RD RC LB CD LINK TD TC RD RC LB CD TD TC RD ETHERNET BT FAST SERIAL RC LB CD ABLED MII LINK RJ5 FAST ETHERNET Port adapter lever Cisco 7 Series ABLED PCMCIA EJECT SLOT SLOT FE MII MII RJ5 RJ5 LINK RJ-5 O PWR OK CPU RESET FAST ETHERNET INPUT/OUTPUT CONTROLLER H5997 I/O controller PCMCIA slots Auxiliary port Optional Fast Ethernet port (MII receptacle and RJ-5 receptacle) Console port Cisco Product Catalog, February 999
Figure 5-8: Cisco 7 Series Rear View Specifications Hardware Table 5-: Cisco 7 Series Hardware Specifications Characteristic Cisco 7 Cisco 7 Cisco 76 Supported network interfaces Ethernet BaseT and BaseFL Ethernet BaseT and BaseFL Ethernet BaseT and BaseFL Fast Ethernet BaseT (RJ-5 and MII) Fast Ethernet BaseT (RJ-5 and MII) Fast Ethernet BaseT (RJ-5 and MII) HSSI HSSI HSSI Token Ring (half and full duplex) Token Ring (half and full duplex) Token Ring (half and full duplex) FDDI (half and full duplex) FDDI (half and full duplex) FDDI (half and full duplex) Synchronous serial Integrated ethernet switching Integrated ethernet switching Channelized T/ ISDN PRI Synchronous serial Synchronous serial Channelized E/ ISDN PRI Channelized T/ ISDN PRI Channelized T/ ISDN PRI ISDN BRI Channelized E/ ISDN PRI Channelized E/ ISDN PRI ATM (single-mode and multimode) Channelized T Channelized T ATM Enhanced (PA-A) ISDN BRI ISDN BRI VG- AnyLAN ATM (single-mode and multimode) ATM (single-mode and multimode) E and E serial + T serial ATM-CES ATM-CES ATM Enhanced (PA-A) ATM Enhanced (PA-A) VG-AnyLAN VG- AnyLAN E and E serial + T serial E and E serial + T serial Power supplies (AC or DC) Port adapter slots 6 Input/output controller Without Fast Ethernet With or without Fast Ethernet With or without Fast Ethernet Network processing engine Without SRAM Without SRAM Without SRAM With MB of SRAM With MB of SRAM With MB of SRAM With MB of SRAM With MB of SRAM With MB of SRAM PCMCIA Flash memory card (optional, slots available) 6 MB, expandable to MB (6, 6, or MB per card) 6 MB, expandable to MB (6, 6, or MB per card) 6 MB, expandable to MB (6, 6, or MB per card) Processor type MIPS RISC MIPS RISC MIPS RISC
Characteristic Cisco 7 Cisco 7 Cisco 76 Dimensions (H x W x D) 5.5 x 6.8 x 7 in. (. x.67 x.8 cm) 5.5 x 6.8 x 7 in. (. x.67 x.8 cm) 5.5 x 6.8 x 7 in. (. x.67 x.8 cm) Weight Chassis fully configured with a network processing engine, I/O controller, port adapters, power supplies, and a fan tray: Chassis fully configured with a network processing engine, I/O controller, port adapters, power supplies, and a fan tray: Chassis fully configured with a network processing engine, I/O controller, 6 port adapters, power supplies, and a fan tray: ~ 5 lb (.7 kg) ~ 5 lb (.7 kg) ~ 5 lb (.7 kg) High-speed midplane port adapters port adapters 6 port adapters Standard components Two slots for port adapters (service adapters not supported) Six slots for port adapters and service adapters Six slots for port adapters and service adapters Subchassis with midplane AC-input power supply AC power cord Subchassis with midplaneac-input power supply AC power cord Subchassis with midplane AC-input power supply AC power cord Supports the following: 6 MB Flash PCMCIA card NPE-5 processor I/O controller Desktop+ IBM IOS software feature set Single port adapter, either ATM OC-SM, ATM OC-MM, Serial T. Table 5-: Ciscon\\n\\n\\n\\n\\n\\n\\n\\n\\n\\n\\n\\n\\n\\n\\n\ \n\\n\\n\\n\\n\\n\\n\\n\\n\\n\\n\\n\\n\\n\\n\\n\\ n\\n\\n\7:environmental specifications;cisco 76:environmental specifications> 7 Series Environmental Specifications Description Midplane Power dissipation Heat dissipation AC-input power AC-input voltage rating AC-input current rating AC-input frequency rating AC-input cable DC-output power DC-input power DC-input voltage rating DC-input current rating DC voltages supplied and maximum steady-state current ratings DC-input cable Frequency Airflow Specification primary PCI buses and secondary PCI bus with an aggregate bandwidth of 6 Mbps ~7W maximum configuration 7W (6 BTUs) 7W maximum (single or dual power supply configuration) - VAC wide input with power factor correction Not to exceed 5A maximum at VAC and.5a maximum at VAC with the chassis fully configured 5/6 Hz 8 AWG -wire cable, with -lead IEC- receptacle on the power supply end, and a country-dependent plug on the power source end 8W maximum (single or dual power supply configuration) 7W maximum (single or dual power supply configuration) 8 VDC nominal in North America, 6 VDC nominal in the European Community Not to exceed A maximum at 8 VDC (7W/ 8 VDC = 7.7A typical draw) Not to exceed 8A maximum at 6 VDC (7 W/ 6 VDC = 6.A typical draw) +5.V @ 6A +.V @ 9A -.V @.5A +.5V @ A AWG recommended minimum, with at least conductors rated for at least F (6 C) 5/6 Hz ~8 cfm Cisco Product Catalog, February 999
Description Temperature Humidity Specification to F ( to C), operating; to 9 F ( to 65 C), nonoperating to 9% noncondensing Agency approvals Safety: UL 95, CSA. No. 95, 695,, AUSTEL TS, AS/NZ 6, IEC 95 EMI: FCC Class A, CSA Class A, 55 Class B, VCCI Class, AS/NRZ 58 Class A Immunity: IEC---, IEC---, IEC---, IEC---5, IEC---6, IEC---, IEC--- Software requirement Cisco IOS Release.(6) CA or later,.()p or later, or.() or later. The 7 series includes the following: Port Adapters and Service Adapters: Four slots for port adapters and service adapters in the Cisco 7 Six slots for port adapters and service adapters in the Cisco 76 Two slots for port adapters in the Cisco 7 (service adapters are not supported in the Cisco 7) Subchassis with midplane AC-input power suppl AC power cord Table 5-5: Network Processing Engine Memory Components Memory Type Size Quantity Description Location DRAM MB to 8 MB to 8-, 6-, or -MB SIMMs (based on maximum DRAM required) Bank : U8 and U5 or U and U5 Bank : U and U or U and U5 SRAM NPE-5 NPE- MB MB 8 8 Eight chips, each being 8K x 9 bits wide Eight chips, each being 5K x 8 bits wide U7 through U7 U8 through U8 U6, U, U, U, U8, U9, U8, and U9 Boot ROM (NPE- only) 56 KB EPROM for the ROM monitor program Socket U9 Unified cache 5 KB Secondary cache for the R7 and R5 RISC processors NPE- and NPE-5: U, U, U, and U6 NPE-: U6, U9, U9, and U7 Hardware for Cisco 7 series routers includes: Port adapters Service adapters (Cisco 7 does not support service adapters) Memory Console and auxiliary cables Second power supply, accessories Upgrades for the network processing engine Note For the Cisco 76 and 7, you must order an input/output controller and a network processing engine. 5
For additional options that apply to most systems, refer to the Cables and Transceivers or Power Supplies and Power Cords chapters later in the catalog. Software Table 5-6: Cisco 7 Series Software Specifications Cisco IOS Software Release Cisco 7 Cisco 7 Cisco 76.CA: Release.CA has reached General Deployment (GD) status on Cisco 7 platforms and will receive maintenance well into the year. Cisco 7 is supported in Release.CC, Release., and Release.T. Network Layer Switching and APPN Network Layer Switching and APPN.CC: Network Layer Switching Network Layer Switching Network Layer Switching Release.CC is an Early Deployment (ED) release which includes support for some advanced features and platforms otherwise found in.t; Release.CC is a superset of Release.CA. Release.CC is scheduled for End of Sales (EOS) in August 999. and APPN and APPN and APPN.: Network Layer Switching Network Layer Switching Release. is a Major Release which has reached General Deployment (GD) status. Desktop, IBM, and APPN Desktop, IBM, and APPN and APPN and APPN.: Release. is a Major Release which includes functionality and platform support in releases through., including.ca and.. IP with Encryption IP with IPSec 56 Desktop/IBM Desktop/IBM with Encryption Desktop/IBM with IPSec 56 IP with Encryption IP with IPSec 56 Desktop/IBM Desktop/IBM with Encryption Desktop/IBM with IPSec 56 IP with Encryption IP with IPSec 56 Desktop/IBM Desktop/IBM with Encryption Desktop/IBM with IPSec 56 with Encryption with Encryption with Encryption with IPSec 56 with IPSec 56 with IPSec 56 /APPN /APPN /APPN /APPN with Encryption /APPN with IPSec 56 /APPN/DBCONN /APPN/DBCONN with Encryption /APPN/DBCONN with IPSec 56 /APPN with Encryption /APPN with IPSec 56 /APPN/DBCONN /APPN/DBCONN with Encryption /APPN/DBCONN with IP- Sec 56 /APPN with Encryption /APPN with IPSec 56 /APPN/DBCONN /APPN/DBCONN with Encryption /APPN/DBCONN with IPSec 56 6 Cisco Product Catalog, February 999
Cisco IOS Software Release Cisco 7 Cisco 7 Cisco 76.T: Release.T includes advanced functionality and platform support in addition to that available in Release.. IP with Encryption IP with IPSec 56 Desktop/IBM Desktop/IBM with Encryption IP with Encryption IP with IPSec 56 Desktop/IBM Desktop/IBM with Encryption IP with Encryption IP with IPSec 56 Desktop/IBM Desktop/IBM with Encryption Desktop/IBM with IPSec 56 Desktop/IBM with IPSec 56 Desktop/IBM with IPSec 56 with Encryption with Encryption with Encryption with IPSec 56 with IPSec 56 with IPSec 56 /APPN /APPN /APPN /APPN with Encryption /APPN with IPSec 56 /APPN/DBCONN /APPN/DBCONN with Encryption /APPN/DBCONN with IPSec 56 /APPN with Encryption /APPN with IPSec 56 /APPN/DBCONN /APPN/DBCONN with Encryption /APPN/DBCONN with IP- Sec 56 /APPN with Encryption /APPN with IPSec 56 /APPN/DBCONN /APPN/DBCONN with Encryption /APPN/DBCONN with IPSec 56 Ordering Information Configuration Worksheets Cisco 7 and Cisco 76 Routers The last pages of this chapter provide configuration worksheets for the Cisco 7 and Cisco 76. Use the information in this chapter and in the Port Adapters and Service Adapters for the Cisco 7 Family chapter to complete the worksheets. To order a router, select a base unit and then order specific options. The base unit comes with a console cable, an auxiliary cable, an AC or DC power supply, a rack-mount kit, a cable-management bracket, and a power cord (AC only). Default components are included in the price of the base unit. 7
Figure 5-9: Cisco 7 Configuration Worksheet Cisco 7 Configuration Worksheet Chassis unit: CISCO7 Main power supply: AC power cord: AC DC Dual AC or DC (optional) Rack-mounting kit, cable management kit (both included): Standard Port adapters: (select up to four) Slot Description Cables Network Processing Engine NPE: (select one) NPE- NPE-5 NPE- Network Processing Engine DRAM upgrade: (select one) MEM NPE 6MB Cisco 7 NPE 6-MB DRAM upgrade kit (spare only) MEM NPE MB Cisco 7 NPE -MB DRAM upgrade kit (default) MEM NPE 6MB Cisco 7 NPE 6-MB DRAM upgrade kit MEM NPE 8MB Cisco 7 NPE 8-MB DRAM upgrade kit Input/output controller: (select one) C7 I/O Cisco 7 input/output controller PCMCIA Flash Memory: (select one) MEM I/O FLC8M Cisco 7 I/O PCMCIA Flash memory card, 8-MB (spare only) MEM I/O FLC6M Cisco 7 I/O PCMCIA Flash memory card, 6-MB MEM I/O FLCM Cisco 7 I/O PCMCIA Flash memory card, -MB Cisco IOS software feature set: (select one, note version when ordered) SF7A.x.x Cisco IOS feature set Version SF7AN.x.x Cisco IOS, APPN Version SF7BS.x.x Cisco IOS Desktop/IBM Version SF7R.x.x Cisco IOS Network Layer switching Version SF7C.x.x Cisco IOS IP only Version Software feature licenses: (select all that apply) FR WPP7 Cisco 7 series WAN Packet protocols license FR IR7 Cisco 7 series interdomain routing FR NF7 Cisco 7 series NetFlow NAT Cisco 7 series network address translation Optional dual power supply: (select one, if required) PWR 7/ Cisco 7 dual AC input power supply option PWR 7/ DC Cisco 7 dual DC input power supply option P7 8 Cisco Product Catalog, February 999
Figure 5-: Cisco 76 Configuration Worksheet Cisco 76 Configuration Worksheet Chassis unit: CISCO76 Main power supply: AC power cord: AC DC Dual AC or DC (optional) Rack-mounting kit, cable management kit (both included): Standard Port adapters: (select up to six) Slot Description Cables 6 5 Network Processing Engine NPE: (select one) NPE- NPE-5 NPE- Network Processing Engine DRAM upgrade: (select one) MEM NPE 6MB Cisco 7 NPE 6-MB DRAM upgrade kit (spare only) MEM NPE MB Cisco 7 NPE -MB DRAM upgrade kit (default) MEM NPE 6MB Cisco 7 NPE 6-MB DRAM upgrade kit MEM NPE 8MB Cisco 7 NPE 8-MB DRAM upgrade kit Input/output controller: (select one) C7 I/O Cisco 7 input/output controller PCMCIA Flash Memory: (select one) MEM I/O FLC8M Cisco 7 I/O PCMCIA Flash memory card, 8-MB (spare only) MEM I/O FLC6M Cisco 7 I/O PCMCIA Flash memory card, 6-MB MEM I/O FLCM Cisco 7 I/O PCMCIA Flash memory card, -MB Cisco IOS software feature set: (select one, note version when ordered) SF7A.x.x Cisco IOS feature set Version SF7AN.x.x Cisco IOS, APPN Version SF7BS.x.x Cisco IOS Desktop/IBM Version SF7R.x.x Cisco IOS Network Layer switching Version SF7C.x.x Cisco IOS IP only Version Software feature licenses: (select all that apply) FR WPP7 Cisco 7 series WAN Packet protocols license FR IR7 Cisco 7 series interdomain routing FR NF7 Cisco 7 series NetFlow NAT Cisco 7 series network address translation Optional dual power supply: (select one, if required) PWR 7/ Cisco 7 dual AC input power supply option PWR 7/ DC Cisco 7 dual DC input power supply option P6 9
Product and Part Numbers Part Numbers for the Cisco 7 Series Base Units Part Description Cisco 76, 6-slot chassis, subchassis, and midplane assembly, AC-input power supply Cisco 7, -slot chassis, subchassis, and midplane assembly, AC-input power supply Cisco 7 Series Network Processing Engines Cisco 7 network processing engine MHz (-MB DRAM) Cisco 7 network processing engine 5 MHz (-MB DRAM) Cisco 7 network processing engine 5 MHz (-MB DRAM) Cisco 7 Series Network Processing Engine DRAM Upgrade Options 6-MB DRAM upgrade kit ( 8-MB SIMMs) (spare) -MB DRAM upgrade kit ( 6-MB SIMMs) (default) 6-MB DRAM upgrade kit ( -MB SIMMs) 8-MB DRAM upgrade kit ( -MB SIMMs) Cisco 7 Series Input/Output Controllers Fast Ethernet (BaseT) input/output controller Fast Ethernet (BaseT) input/output controller, 8-MB Flash memory, software (reseller channel) Input/output controller Input/output controller, 8 MB Flash memory, software (reseller channel) Cisco 7 Series Flash Memory Cards 8-MB PCMCIA Flash memory card 6-MB PCMCIA Flash memory card -MB PCMCIA Flash memory card Cisco 7 Series Chassis Assemblies Cisco 76, 6-slot chassis, subchassis, and mid-plane assembly, AC-input power supply Cisco 7, -slot chassis, subchassis, and mid-plane assembly, AC-input power supply Cisco 7 Series Single Power Supplies AC-input power supply for Australia Part Number CISCO76 CISCO7 NPE- NPE-5 NPE- MEM-NPE-6MB= MEM-NPE-MB MEM-NPE-6MB MEM-NPE-8MB C7-I/O-FE or C7-I/O-FE-MII C7-I/O-FE-SW= C7-I/O C7-I/O-SW= MEM-I/O-FLC8M= MEM-I/O-FLC6M MEM-I/O-FLCM CISCO76= CISCO7= PWR-7-ACA= Cisco Product Catalog, February 999
Part Description AC-input power supply for Europe AC-input power supply for Italy AC-input power supply for United Kingdom DC-input power supply Power cords (reseller channel) Cisco 7 Series Dual Power Supplies Dual AC-input power supply Dual DC-input power supply6 Cisco 7 rack-mount kit (includes cablemanagement brackets, rack-mount brackets, and screws) Cisco 7 spare system packaging material Cisco 7 redundant power supply cover Cisco 7 fan tray assembly (spare) Cisco 76 subchassis and midplane assembly (spare) Cisco 7 subchassis and midplane assembly (spare) Cisco 7 blank card carrier Cisco 7 port adapter slot divider Cables Cisco 7 chassis, -slot chassis, SWS chassis, midplane assembly, AC power supply, NPE 5, I/O controller, 6 MB PCMCIA Flash Memory, MB DRAM, Desktop+ IBM IOS feature set software, - port ATM OCc/STM multimode port adapter, enhanced Everything listed in bundle number plus: -port ATM OSc/STM single mode (IR) port adapter, enhanced Everything listed in bundle number plus: -port serial T port adapter Part Number PWR-7-ACE= PWR-7-ACI= PWR-7-ACU= PWR-7-DC See the Power Supplies and Power Cords chapter later in the catalog. PWR-7/ PWR-7/-DC ACS-7-RMK= PKG-7= MAS-7PSCOVER= MAS-7FAN= MAS-76MP= MAS-7MP= MAS-7KBLANK MAS-7KSLOTDIV= See the Cables and Transceivers chapter later in the catalog. CISCO7-ATM-OC CISCO7-ATM-OCSM CISCO7-ATM-T
Cisco Product Catalog, February 999