Enterprise Switches. Accelar 8000

Transcription

1 Enterprise Switches Accelar slot and 6-slot Chassis Data Sheet High Availability Operational Simplicity Low cost of Ownership Year 2000 Compliant The Accelar 8000 enterprise switch is a new platform providing high availability and multi-service integration for enterprise campus and MAN/WAN applications. It leverages Nortel Networks unmatched experience in delivering high-availability systems for carriers, service providers and financial markets. As a result, it is the ideal platform for enterprise network managers wishing to deploy unified networks for the new millennium. The Accelar 8000 features a highly fault-tolerant chassis, enabling it to deliver unprecedented levels of resilience and availability. It also provides investment protection by enabling seamless integration of routing switch technology, multi-service MAN/WAN technology and IP telephony, within a system scaling from 50Gbps to 256Gbps. The Accelar 8000 enterprise switch is available in two form-factors, providing a high-availability platform for all enterprise applications. The 10-slot Accelar 8010 chassis is designed for high-density campus wiring closets and backbones needing the highest levels of availability and scalability. The smaller 6-slot Accelar 8006 chassis is designed for medium-sized wiring closets and backbones in which space is at a premium and lower density is desired.

2 KEY BENEFITS High Availability The Accelar 8000 chassis features a passive switching architecture that is designed to provide high availability for the wide range of supported technologies. Up to three load-sharing and load-balancing power supplies can be installed, with a fully loaded chassis able to operate with any two power supplies present, providing N+1 power redundancy. All power supplies can be hot-swapped. Both AC and DC power supplies are available, allowing the chassis to be deployed in both enterprise and service provider networks. Fan-trays (dual in the 10-slot chassis) are provided for cooling, and include hot-swap capability. The chassis provides system monitoring and automated reporting of component failure for power supplies, fans, system modules and interface modules. Accelar 8000 supports distributed switching and management, eliminating single points of failure and providing total system resilience. Redundant MultiLink Trunking (MLT) provides scalable riser, server and inter-switch bandwidth, with the trunk ports distributed across separate modules. This eliminates the single point of failure found in many trunking implementations that terminate on a single module in the chassis. LinkSafe backbone and riser connections provide recovery from cabling failures in microseconds, ensuring maximum uptime for critical business applications. Accelar 8000 provides complete security for the campus LAN, restricting network access to authorized users and controlling access to departments, servers and critical applications. Operational Simplicity The Accelar 8000 chassis provides simplified installation and maintenance, with power supplies, fan trays and all system and interface modules being accessible from the front of the chassis. The system supports scalable switching bandwidth from 50Gbps to 256Gbps and a wide range of interface types, initially including Fast Ethernet, Gigabit Ethernet and ATM. Interface modules for multi-service MAN and WAN connectivity will also be available in future. MultiLink Trunking (MLT) provides scalable riser, server and inter-switch bandwidth up to 8 Gbps today, scaling to 32 Gbps in the future. Effective control of bandwidth-hungry IP Multicast applications is automatically provided using standard IETF protocols there is no added complexity by unnecessarily adding new protocols to handle Multicast traffic. Policy services and prioritization for critical applications are easily implemented and monitored on the Accelar 8000 using Optivity end to end policy management. Intelligent agents in the Accelar 8000 interface modules provide Class of Service (CoS) support using industry standards to carry priority information across the network. 2 Accelar slot and 6-slot Chassis Data Sheet

3 Configuration and management of Accelar 8000 switches is supported by Nortel Networks industry and marketleading Optivity network management system, including a common Command Line Interface (CLI) across the Nortel Networks enterprise product families. Every Accelar 8000 switch port also supports 4 groups of RMON, Port Mirroring and Remote Traffic Monitoring (RTM), enabling network managers to diagnose problems without leaving their desks. Low Cost of Ownership The Accelar 8000 chassis provides a single integrated platform to meet all enterprise campus and MAN/WAN requirements. Accelar 8000 provides easy front-access to all system components and interface modules, reducing floor-space requirements in wiring closets and data centers. System components are common to both 6 and 10 slot chassis and many interface modules are shared with other Nortel Networks switches, reducing sparing and maintenance costs. Accelar 8000 provides scalable switching bandwidth from 50Gbps to 256Gbps, together with system and interface modules for edge switching, core routing switching and multi-service MAN/WAN integration. Network managers can deploy Accelar 8000 with the knowledge that Nortel Networks is able to provide unmatched data and telephony technology integration within a single enterprise platform. Year 2000 Compliant This product has been tested and certified Year 2000 compliant by Bay Networks, a Nortel Networks business unit, according to the test cases identified in Bay Networks Year 2000 Test Strategy/Plan. See for more details. Accelar 8000 Features High Availability Fully redundant chassis N+1 power, dual fan-trays. Choice of AC or DC power. Hot-swap of chassis components e.g. power supplies and fan-trays. Hot-swap of interface modules see module datasheets for details. Resilient riser, backbone and server connections using Redundant MultiLink Trunking (MLT) and LinkSafe. Network security based on department, user or application. Operational Simplicity All chassis components, system and interface modules accessible from the front of the chassis. Scalable riser, server and backbone connections up to 32 Gbps using MLT. Efficient, automatic control of Multicast applications using standard IETF protocols. Support for Optivity device and network management, including common Command Line Interface. Support for Optivity end to end policy management. Low cost of Ownership Future-proof platform with integrated support for routing switch, multi-service MAN/WAN and IP telephony technologies. Common sparing for chassis, power supplies, fan-trays and interface modules reduces maintenance and support costs. Intelligent management agents embedded in the interface modules eliminate the need for separate supervisory or management modules. Accelar slot and 6-slot Chassis Data Sheet 3

4 TECHNICAL SPECIFICATIONS Table 1: Technical specifications for the Accelar 8000 chassis System Electrical Specifications Line Frequency 47 to 63 Hz System with one power supply or two power supplies (redundant configuration) Input Volt Amperes Rating 1,236 VA maximum Input Power 1,112 W maximum Input Voltage V AC Input Current 12-6 A per line cord Thermal Rating 3,792 BTU/hr System with two power supplies (non-redundant) or three power supplies (redundant configuration) Input Volt Amperes Rating 2,472 VA maximum Input Power 2,224 W maximum Input Voltage V AC Input Current 12-6 A per line cord Thermal Rating 7,584 BTU/hr Physical Dimensions 8010 Chassis 10 Slot (H) 22.9 in. x (W) 18.5 in. x (D) 19.9 in. [(H) 58.2 cm x (W) 47.0 cm x (D) 50.5 cm] 8006 Chassis 6 Slot (H) 16.8 in. x (W) 18.5 in. x (D) 19.9 in. [(H) 42.6 cm x (W) 47.0 cm x (D) 50.5 cm] Power Supply (H) 4.8 in. x (W) 5.4 in. x (D) 17.9 in. [(H) 12.2 cm x (W) 13.7 cm x (D) 45.5 cm] Fan Tray (H) 8.6 in. x (W) 1.5 in. x (D) 18.5 in. [(H) 21.8 cm x (W) 3.8 cm x (D) 47.0 cm] 4 Accelar slot and 6-slot Chassis Data Sheet

5 Table 1: Technical specifications for the Accelar 8000 chassis Weight Minimum System Weight Maximum System Weight 85 lb. (39 kg) 200 lb. (91 kg) Cooling System Specifications Fan trays Fans Thermal Sensors 2 in 8010 chassis, 1 in 8006 chassis 8 per fan tray one per fan tray Noise Maximum 65db Environmental Specifications Operating Temperature 5 to 40 C Storage Temperature -25 to 70 C Operating Humidity 85% maximum relative humidity, non-condensing Storage Humidity 95% maximum relative humidity, non-condensing Operating Altitude 10,000 ft (3,000 m) maximum Storage Altitude 10,000 ft (3,000 m) maximum Free Fall/Drop ISO 4180-s, NSTA 1A Vibration IEC /34 Shock/Bump IEC Accelar slot and 6-slot Chassis Data Sheet 5

6 Table 1: Technical specifications for the Accelar 8000 chassis Electromagnetic Emissions Meets requirements of US Canada Australia/New Zealand Japan Taiwan FCC CFR47 Part 15, Subpart B, Class A ICES-003, Issue-2, Class A AS/NZS 3548:1995, Class A VCCI-V3/97.04,Class A CNS13438, Class A EN (CISPR 22:1985), Class A CE Mark Electromagnetic Susceptibility EN ,1992 Safety Agency Approvals UL Listed (UL 1950) CUL CSA 22.2 #950 CB with all national deviations NOM NOM 019-SCFI Accelar slot and 6-slot Chassis Data Sheet

7 ORDERING AND AVAILABILITY Table 2: Ordering and availability information for the Accelar 8000 Chassis Order Number Product Name Description DS Accelar Slot Chassis incl. 2 fan trays and backplane DS Accelar Slot Chassis incl. 1 fan tray and backplane DS1405?01 Accelar 8001PS Power Supply: 110/220V Ac DS Accelar 8002PS Power Supply: 48V DC The seventh character (?) of the AC Power Supply order number MUST be replaced with the proper code to indicate desired product nationalization: A - No power cord included. B - European Schuko power cord common in Austria, Belgium, Finland, France, Germany, The Netherlands, Norway and Sweden. C - Power cord commonly used in the United Kingdom and Ireland. D - Power cord commonly used in Japan. E - North American power cord. F - Australian power cord, also commonly used in New Zealand and the People s Republic of China. Acronym Glossary ATM CLI CoS IEEE IETF IGMP IP LAN MAN MLT RMON RTM WAN Asynchronous Transfer Mode Command Line Interface Class of Service Institute of Electrical and Electronic Engineers Internet Engineering Task Force Internet Group Management Protocol Internet Protocol Local Area Network Metropolitan Area Network MultiLink Trunking Remote Network Monitoring Remote Traffic Monitoring Wide Area Network Accelar slot and 6-slot Chassis Data Sheet 7

8 United States 4401 Great America Parkway Santa Clara, CA T Canada 8200 Dixie Road, Suite 100 Brampton, Ontario L6T 5P6 Canada T Copyright 1999 Northern Telecom Limited. All rights reserved. Bay Networks and Optivity are registered trademarks, and Accelar, BaySecure and LinkSafe are trademarks of Bay Networks, Inc. NORTEL, NORTEL NETWORKS, the NORTEL NETWORKS corporate logo, the globemark design, and HOW THE WORLD SHARES IDEAS are trademarks of Northern Telecom Limited. All other brand and product names are trademarks or registered trademarks of their respective holders. Information in this document is subject to change without notice. Northern Telecom Limited assumes no responsibility for any errors that may appear in this document. DA WC-A / 2-99