NGN/IMS SOLUTIONS www.protei.com
2 PROTEI imswitch.5 Softswitch Class 5 PROTEI ImSwitch.5 (Softswitch class 5) is a carrier class field proven platform for business and residential VoIP routing. It is intended for end users requiring local and long distance VoIP telephony services and primarily deals with subscription telephone services. ImSwitch.5 is a perfect solution for any business looking for an efficient telephone service platform that increases revenue and supports an extensive variety of applications. It provides more than 30 services, including Unified Communication (Voice, Video, IM, Presence). The number of services can be easily increased with the use of external intelligent network platforms. Using PROTEI ImSwitch.5 Operators can deliver to users a wide range of services with maximum efficiency and make sure that customers stay loyal. Wide range of supported signaling systems makes it ideal for use on boundaries of networks with different protocols. SIP SIP-T H.323 TDM LE SS7 E-DSS1 (PRI) CAS R2 LI Interception Management Console imswitch.5 SIP, SIP-T, H.323 H.248, SIGTRAN SIP-phone maccess.le SIP RTP SIP H.248 RTP RTP V5.2 Residential Gateway Outstanding flexibility makes PROTEI ImSwitch.5 suitable for applications ranging in scale from offices to national networks. Using PROTEI ImSwitch.5 allows Operator to raise income due to new NGN services implementation. tel.:. +7 812 449-4727 fax: +7 812 449-4729 e-mail: sales@protei.com
Functionality Powerful routing subsystem with scripting language for routing definition Virtual PBX services including WEB-interface for virtual PBX self-administration Support of RADIUS protocol for interaction with billing Any type of numbering plans Call Authentication, Charging and Routing CDR generation and set of statistic counters Hot standby redundancy SNMP for alarm indication Wide list of supplementary services (conditional and unconditional forwarding, transfer, hunt and pick-up groups, conference, video calls etc) Convenient system administration and configuration management tools Possibility to work with voice (RTP) proxying Open interface (SIP) for interacting with application servers (intellectual platform) SIP-register functionality support for all subscriber devices Wide list of compatible devices (SIP telephones, softphones, FXS gateways, trunk gateways) MCU subsystem to support conference-calls Can be used in IMS environment as telephony application server (TAS) Embedded LI functionality (can be adopted according to national requirements) 3 Supplementary services IVR for each vpbx instance Hunt and pickup groups Presence Messaging (SIP message) Embedded call recording subsystem (optional) Music on-hold individual for each vpbx 3-party conference Multi-party conference Auto-redial Auto call back CLIP/CLIR Black lists Multiple numbers for one subscriber Call transfer HotDial/FDCI Self-provisioning via WEB-cabinet Destination Value Number of subscribers Up to 25 000 subscribers System throughput Up to 5 000 concurrent calls, up to 100 CAPS Interface with packet-switched networks Ethernet 100/1000 Base-T (IEEE 802.3) Protocols for interaction with NGN networks SIP, H.248/MEGACO, H.323 Protocols for interaction with billing/aaa systems RADIUS, CDR sending via telnet/ftp Supported VAS Autoredial (CCNR), Call interception (LH), Call Holding (HOLD), Invitation to conference (CONF), Call transfer (CT), Various types of redirection (CF), Subscriber-group connection (CUG), Call waiting (CW), Hotline, Centrex services, Intelligent Network Services (IN), «Private office» services, Voice instructions, welcome messages and others Maintenance WEB-based administration kit, CLI via telnet/ssh, FTP, SNMP www.protei.com
4 PROTEI imswitch.4 Transit Softswitch Class 4 Quality and reliability of network depends directly on Softswitch choice. PROTEI imswitch.4 (Transit Softswitch class 4) solution is one of the best possible basis for efficient development of NGN/IMS network. By supporting a wide range of signaling protocols the system connects to any type of networks and delivers to customers any telecom service globally. PROTEI imswitch.4 provides intelligent call routing and allows setting virtually any needed routing parameters. PROTEI imswitch.4 is a key element for building large NGN/IMS networks. It provides call routing through international networks and then transfers the information class 5 softswitches and IP PBXs serving particular local areas for calls completion. The solution ensures VoIP carriers and international corporations benefit the most from installation of Softswitch class 4 that can deliver carrier grade VoIP services. Softswitch TDM LE RTP SIP, SIP-T, H.323 n*e1 SS7 E-DSS1 (PRI) CAS R2 LI n*e1 ASR, SC, CAPS, ACD, PDD,SCD imswitch.4 SIP, SIP-T, H.323, H.248, SIGTRAN mgate.itg Interception Management Console RTP R-Factor, PESQ, IP bandwidth, loss R-Factor, PESQ, IP bandwidth, loss SIP, SIP-T, H.323, H.248, SIGTRAN RTP R-Factor, PESQ, IP bandwidth, loss mgate.itg mgate.itg tel.:. +7 812 449-4727 fax: +7 812 449-4729 e-mail: sales@protei.com
5 Functionality Flexible advanced routing capabilities to provide high quality of VoIP calls and reduce cost (for ex., trunk route failover, re-routing on route failure detection) Powerful system of data collection and analysis for monitoring quality of service (QoS) according to various parameters Possibility to create routing trees basing on Calling and Called party Numbers and many other parameters Intelligent load sharing and traffic distribution capabilities Friendly User Interface for remote control management of maintenance, configuration, monitoring resources, software updates, etc. Possibility to use External Routing APIs, which can create routing parameters and send it to imswich4 via RADIUS Compatibility with third-party NGN/IMS equipment (switches, media gateways) Establishing basic connections according to intellectual routing subsystem Support a wide range of signaling protocols for working with NGN and TDM networks (SIP, SIP-T, H.323, H.248/MEGACO, SIGTRAN) Embedded LI functionality (can be adopted according with national requirements) SIP interface for interaction with Application Servers Powerful CDR generation and statistics gathering subsystems for providing certain QoS RTP proxying (optional) SNMP for alarm indication Destination Value System throughput Up to 5 000 concurrent calls, up to 100 calls per second Interface with packet-switched networks Ethernet 100/1000 Base-T (IEEE 802.3) Protocols for interaction with NGN networks SIP, H.248/MEGACO, H.323 Protocols for interaction with billing/aaa systems RADIUS, sending CDR Maintenance WEB-based administration kit, CLI via telnet/ssh, FTP, SNMP www.protei.com
6 PROTEI imswitch.pbx Medium Capacity PBX PROTEI imswitch.pbx is great for businesses of all sizes which decided to start utilizing an IP network for placing calls. VoIP calls can help reduce the cost of monthly phone bill by using the internet connection to connect telephone devices instead of traditional telephony infrastructure. Servers can be custom built to suit any VoIP start-up s business model whether it is a small prepaid phone card business or a large multi-national corporation. TDM LE SIP, SIP-T, H.323 SS7 E-DSS1(PRI) CAS R2 LI Interception Management Console SIP, SIP-T, H.323, H.248, SIGTRAN mgate.itg PC Smartphone Tablet PC PROTEI imswitch.pbx is a complete package for providing some of contemporary the most popular PBX-services. Simple integration with other PROTEI NGN equipment simplifies further expand of functionality and service range of the system. The system supports a number of additional options (IVR, Fax-to-Email etc.) that increase attractiveness of service and ensures revenue providing demanded services for small and medium companies. tel.:. +7 812 449-4727 fax: +7 812 449-4729 e-mail: sales@protei.com
7 Functionality Embedded simple call routing functionality Tone/announcement generation Internal switching functionality (2 switching between 2 subscribers when external switch is unavailable) Flexible numbering Different subscriber categories support SIP Register functionality for interaction with softswitches Convenient remote administration tools: CLI, Web-based interface, SNMP, FTP Features IVR and music on-hold Display name modification Any type of numbering plans, multiple numbers for one subscriber Hunt and pickup groups Embedded call recording subsystem Chat-room and multi-party conference Auto-redial, auto call back Black lists Call transfer Busy Line Function (BLF) HotDial/FDCI Self-provisioning via WEB-cabinet Destination Value Interfaces E1/PRI, CAS (R2, R1.5), FXO, FXS, Ethernet 100/1000 Base-T (IEEE 802.3) Number of subscribers Up to 2 000 subscribers System throughput Up to 200 simultaneous calls, up to 10 CAPS Protocols for interaction with NGN networks SIP, H.248/MEGACO, H.323 Protocols for interaction with billing/ AAA systems RADIUS, CDR sending via telnet/ftp Maintenance WEB-based administration kit, CLI via telnet/ssh, FTP, SNMP www.protei.com
8 PROTEI mgate.itg Trunk Gateway PROTEI Trunk Gateway (mgate.itg) enables efficient integration between NGN/IMS and legacy TDM networks. This carrier-grade solution has wide range of functions, variety of modifications and set of supported protocols allowing easy deployment in any network. PROTEI Trunk Gateway can operate as independent solution or complement PROTEI Service Platforms powering the deployment of interactive converged services over any bearer. With these platforms such services as like IVR, Voice & Video Mail and RBT and more can be easily deployed Basic call control procedures with DDI and CLIP/CLIR features are supported for incoming and outgoing calls. Flexible routing subsystem enables to create different routing rules for different types of calls depending on incoming trunk, destination and/or origination number and bearer services being used. The gateway hardware can be made in one of two versions. 6U chassis, filled with necessary quantity of cards (up to 96 E1 in the chassis) 1U compact unit 19 (up to 8 E1 per unit) tel.:. +7 812 449-4727 fax: +7 812 449-4729 e-mail: sales@protei.com
9 Functionality SIP<->SS7 (ISUP), SIP<->PRI and SIP<->R2 signaling conversion Video and audio call support Capacity up to 96 E1 per chassis E1 G.703 interface for connection to telecom equipment Processing and conversion of the messages received from SIP into ISUP messages and vice versa Convenient number conversion and routing features DDI, CLIP supplementary services SNMP for alarm monitoring 1U slim rack or 6U high-density chassis with total capacity of 1 card up 8 E1 and total chassis capacity up to 96 Е1 Remote access for administration via tcp/ip/ssh or telnet Features Efficient integration between NGN/IMS and TDM networks Easy configurable Convenient OAM tools Compatibility with third-party equipment Powerful CDR generation system Highly scalable according to any Operator s needs Maximum compatibility, reliability and performance Hardware Intel platform 1U slim rack or 6U high-density chassis with total capacity of 1 card up 8 E1 and total chassis capacity up to 96 Е1 Redundant PSU (optionally) FLASH-disk solid-state reliable storage Linux Open Source OS Destination Value Number of E1 trunks Up to 96 E1 per chassis Number of SS#7 links up to 8 per card Type of interfaces E1, G.703, 120 Ohm symmetrical Type of supported signaling SS7 (MTP, ISUP), R2, PRI, SIP, H.323 Audio codecs G.711, G.729, G.726, AMR Video codecs (option) H.263, MPEG4, rate and size matching Dimensions 19" rack mountable, 1U (non-scalable) or 6U (scalable) www.protei.com
10 PROTEI maccess.mak High-Capacity Access Gateway PROTEI maccess.mak is cost-effective solution for introducing all range of NGN-services to subscribers. By supporting a wide range of network technologies the system provides seamless transition from circuit-switched networks to NGN/IMS infrastructure. Using PROTEI maccess.mak ensures subscribers access to all advantages of IP world without reference to existing networks and provides ISDN functions and VAS-services to users with maximum results in minimum time. PROTEI maccess.mak has a modular structure and can be equipped with various cards in any combination depending on Customer needs. Such the architecture simplifies process of expanding and upgrading the system without interruption of service providing and gives a great opportunity for installing a high-capacity system up to 5472 subscribers' lines in one 42U rack. tel.:. +7 812 449-4727 fax: +7 812 449-4729 e-mail: sales@protei.com
11 Functionality Embedded simple call routing functionality Tone/announcement generation Internal switching functionality (2 switching between 2 subscribers when external switch is unavailable) Flexible numbering Different subscriber categories support SIP Register functionality for interaction with softswitches Convenient remote administration tools: CLI, Web-based interface, SNMP, FTP Highly flexible, scalable platform Destination Value Number of Analog Two-wire Interfaces: 6U 19 chassis full 42U rack up to 912 lines up to 5472 lines Interface Boards: analog two-wire board (FXS) SHDSL board 30/48 POTS interfaces 8 SHDSL interfaces VoIP Codecs G.711, G.723. G.726, G.729 Subscriber Interfaces FXS, PRI, FXO Supported Protocols: towards TDM exchanges towards NGN softswitches PRI/E-DSS1, ISUP-R, R1.5, R2 SIP, H.248/MEGACO Administration, configuration management and maintenance Web-based administration kit via secure connection, CLI, telnet/ssh, FTP, SNMP 15102013 dmitry@protei.ru www.protei.com
12 PROTEI maccess.mtu Small/Medium Capacity Access Gateway PROTEI maccess.mtu is a subscriber gateway specially designed for providing network services in smaller scopes, such as offices and residential applications. The gateway is scalable from 2 to 48 analog ports and connects analog terminals or PBXs to IP network using FXS or PRI Interfaces. PROTEI maccess.mtu allows providing subscribers with traditional telephony as well as new-generation Triple Play services. Supporting by the system such protocols as SIP, H.248/MEGACO enables flexible deployment and interoperability with the evolving NGN- networks. It can be effectively used with PROTEI softswitches as well as with third-party equipment. Features Fast and simple network building Flexible scaling Compatibility with third-party equipment Convenient maintenance subsystem Low outlay, high returns Destination Value Number of Analog Two-wire Interfaces: 1U 19 module 24/48 ports Interfaces types: FXS Ethernet 24/48 4 VoIP Codecs G.711, G.723. G.726, G.729 Subscriber Interfaces FXS, PRI, 10/100 Base-T Supported Protocols: towards NGN softswitches SIP, H.248/MEGACO Administration, Configuration Management and Maintenance Web-based administration kit via secure connection, CLI, telnet/ssh, FTP, SNMP tel.:. +7 812 449-4727 fax: +7 812 449-4729 e-mail: sales@protei.com
PROTEI GMSC Gateway Mobile Switching Center 13 PROTEI Gateway Mobile Switching Center (GMSC) is designed for servicing voice calls of MVNO-subscribers. PROTEI GMSC functionality is based on softswitch class 4 and provides flexible signaling and voice traffic routing, high performance and full compatibility with equipment of different vendors. The system provides quick and efficient deployment of traditional or virtual mobile network (MVNO and MNO) and supports a wide range of additional features required at transit level, including flexible traffic balance, backups, QoS and support of MNP. Optionally, the system may include transit node PROTEI STP for SS7 traffic processing. Call Center VAS IVR RBT Voice Mail MCA Virtual Office etc. GMSC E1/ISUP MGW HLR STP PROTEI GMSC MAP/CAP Processing Subsystem MAP SIGTRAN MNO (Host Operator) MAP/CAP SIGTRAN Functionality Easy deployment of full-mvno services Flexible integration with different types of networks Wide range of supported signaling protocols: CAMEL v2... 4 for implementing gsmssf functionality; MAP (v1... 3) for interaction with HLR; SIGTRAN/M3UA for interaction with HLR and SCP; SIP, SIP-I, SIP-T for interworking with NGN networks. Compatibility with equipment of different vendors Intelligent calls routing according to various parameters, including e-call flag, SLA and traffic intensity of directions; Ability to modify numbers of calling and called subscribers flexibly during call routing and to query external systems for routing parameters, in particular over protocol RADIUS Embedded gsmssf subsystem (CAMEL phase 2..4 support) Scalable according to network growth Convenient licensing mechanism based on number of simultaneous calls Internal STP functionality Powerful logging system (CDR generation and statistic counters) Ability to flexibly adapt the format of data included in records about provided services (Call Detail Record) according to the requirements of the operator and service providers Powerful tool for statistics collection to ensure QoS SNMP for alarm indication Embedded LI functionality (can be adopted according to national requirements) www.protei.com
14 PROTEI NGN/IMS Solutions tel.:. +7 812 449-4727 fax: +7 812 449-4729 e-mail: sales@protei.com
15 Company Profile PROTEI is one of Russian leading providers of IT solutions to the international telecommunications industry. The company was founded in 1997, and now has an elite team of 200 top IT and telecommunications professionals. Our products have been tried and tested in many fields, with customers including emergency services and government organizations. More than 37 mobile and fixed-line operators in 22 countries use PROTEI equipment to serve over 100 million subscribers worldwide. Using the latest technologies we bring you cutting-edge solutions for converged services. Our innovative approach to development means that even traditional services such as SMS and Voice Mail obtain a special PROTEI flavor the application of modern technology to add new functionality, increase reliability and performance and provide extra benefits for both operator and subscriber. In a highly competitive and near-saturated market, innovation and cost-effectiveness is the clear way forward for operators and service providers that want to stay ahead of the field. PROTEI has a broad range of products designed with exactly these factors in mind. NGN Equi pment Benefits Carrier class field proven solutions Reliable and cost effective hardware and software platform (HP Proliant or similar/linux XFS) Architecture with Horizontal scaling for all platforms allows cost efficient solution deployment, growing according to Customer needs and provide high reliability without single failure point Services Long warranty period - up to 1,5 years 24х7х365 support service Free-of-charge support during warranty period Free-of-charge initial training Full remote access to the system components including possibility of remote SW upgrades, updates and patches Automated systems for customers support request registration and tracking www.protei.com
PROTEI Ltd 60A B.Sampsonievsky, Business Center «Telecom SPb» St.Petersburg, 194044, Russia Tel.: +7 812 449 4727 e-mail: sales@protei.com