CTM Contract Management. Authority User Guide

Transcription

1 CTM Contract Management Authority User Guide April 2012

2 Version Control Version Date Amendment 1.0 March 2012 NEW split into two manuals tender and contract management 1.1 April 2012 Update with 6.9 release

3 Table of Contents SECTION 1: INTRODUCTION TO TENDER MANAGEMENT AND CONTRACT MANAGEMENT... 4 SECTION 2: ACCESSING TENDER MANAGEMENT Modules and settings within tender management... 5 SECTION 3: MANAGEMENT OF INFORMATION... 6 SECTION 4: CONTRACT MANAGEMENT Create draft contract for a single supplier (full signing process) Set-up contract add-ons Attach contract documents Create cover letter Assign a contract manager Create multiple suppliers draft contract Communicate and sign the contract with the supplier (full signing process) Send draft contract Flag contract to final Create and send regret letter Publish the award Working with a contract Contract amendments Contract call-off Contract Collaboration Tasks Supplier evaluations Contract expiry alerts Import a contract master list GENERAL USER INFORMATION Edit user profile Digital signatures Verification of digital certificate against external validation service Reporting My tasks Other areas Contract number (separate module)... 40

4 Section 1: Introduction to Tender Management and Contract Management EUS Tender Management (CTM) is a comprehensive tool that allows tenders to be created, distributed and evaluated without the need to create and manage paper documents. CTM makes the tendering process easier for both buyers and suppliers and covers the entire process including the contract management phase. Tender Management is used by government organisations and general contractors to improve the efficiency of the tendering process. For those who respond to tenders, for example general contractors, sub-contractors and trades people, tender management simplifies and speeds up the process of formulating tender responses. You can add all of the necessary drawings, specifications, schedules, tender documents and other attachments to the Request for Tender you issue or receive. Buyers have access to a rich database of their chosen suppliers when issuing a Request for Tender. If appropriate, you can source potential new suppliers, complete with prequalification details, from the supplier database. Suppliers are able to present information to initiating organisations at the time and place that purchasing decisions are made. Tender Management offers you the following advantages: Saves you time and money compared with traditional methods Greatly improves the exchange and management of information Improves accuracy throughout the tendering, quotation and contract process Reduces time wasted on low value administration (faxes, phone, travelling) Increases traceability Web-based for easy access to information anytime, anywhere

5 Section 2: Accessing Tender Management EUS Tender Management and Contract Management is only available if your company has registered to use this system. To access CTM: 1. Open your web browser and go to your CTM logon page. Insert your Username and Password into the appropriate fields then click on the [Log in] button. The EUS Tender Management Welcome Page displays. 2.1 Modules and settings within tender management Tender management has modules and settings which can be switched on or off. This guide describes all modules and settings available within the contractual process. If you do not find specific links or modules when accessing the system it is likely that certain modules are switched off. To see the modules you can access, review your personal profile described in section Edit user profile within this document. To read in detail about the tender module please see the tender management buyer user, e-auction guide, DPS and others through the help of our support office. If you would like certain modules switched on, contact your company administrator or your CTM support.

6 Section 3: Management of Information To access your contracts you either enter through the relevant tender preceding the contract or create stand-alone contract. All your contracts can be found under the Contracts link on your start page of the system once you are logged in. Your contracts database consist of three tabs, meaning the contracts are split into Active, Pending and Expired. Section 4: Contract Management When a supplier is awarded for a Tender you can create a contract with the awarded supplier. The contract process can also be run without having a preceding tender management process. There are three different contract processes that can be selected depending on your authority needs/internal processes or even from contract to contract. These three different flows are described more in detail in each sub-section below. They are; Full signing process, Simplified signing process and Signing outside CTM.

7 During and after the contract process, you can assign tasks to users within your company. You can also change owner of the contract. After a completed contract there is the possibility to evaluate the supplier performance of the contract. The contracts created for a Tender is available on the contracts tab. From the contracts tab you also create contracts for the Tender. You can also create the contract from the checklist of the tender Create draft contract for a single supplier (full signing process) To create a draft contract if you have not chosen the simplified workflow or signing outside CTM 1. Click on the {Contracts} tab for the Tender you wish to continue with a contract process. 2. Click on the [Create contract ] button. The create screen is displayed

8 The following fields can be filled in when creating a contract. The fields marked with a * are required fields. Fields can vary depending on setting made by the operator in respective country, or depending on modules on/off. Field Contract reference Name and description Workflow type Contract type Description Any internal or external reference to the contract. Name and more detailed description of the contract. Full signing process The full signing process is what is when both the draft and final contract have to be sent to the supplier for signing Simplified signing process The simplified process is still signing of the contract within CTM, but only the first version of the contract have to be sent to the supplier for signing Signing outside of CTM All signing of the contract is taking place outside of CTM, the contract is available within CTM for contract repository purposes. The information and status of the contract can be changed at any time without require any re-signing of the contract. The supplier(s) will have access to the contract once you have set it as final Frameworkagreement or Project; if you select

9 Call-Off type Supplier Lot Contract value Payment type Contract dates Contract signing Allow change of end Comment Frameworkagreement you will activate an additional dropdown field called Call-Off type; If you selelct Project you will only make one contract with one supplier and not have any options for any call-offs. Here you select what type of call-off type you require for this specific contract. Mini-competition Allows for creation of minicompetitions from the contract tab called Call-Off Ranking Ranking will allow for setting rank on suppliers within a multi-supplier contract and also disable the possibility to do any mini-competitions. Calloffs will be done outside of CTM. See section below for more information about ranking. Combination Allowing a combination of those, i.e. possibility to set rank on suppliers and also allowing the mini-competition Ranked with distribution key se ranked Select the supplier to sign the contract with. Only the awarded suppliers are listed. Selection of the Tender Lot the contract should reflect, one or more Lots can be selected. Clicking the + icon expands a view to see more detail about the award of the selected supplier and Lot Total value of the contract, usually the total quote received and negotiated with the supplier in tender process. The contract payment type, the payment types can be updated by the company administrator. Start and expiry date of the contract This option enables you to sign the contract digitally both from the supplier side and from your side as the buyer. Clicking that box will expand a list of users that can sign a contract within your organisation. If you click this the system will allow you to change a contract that is in final status. This can then be made from the bottom of the checklist (see picture below) consequence will be that prolonged contract is set to draft version again in order to get the prolonging accepted by all parties. (IF you have selected Full signing process) Here you can enter any additional comment or description that will be available to the supplier 3. Fill in the fields and values in the create contract screen and click [Save]. First draft contract is created. Editing of the contract and the steps to complete the contract is displayed in a checklist mode. Once an item in the checklist is completed it will be marked with a green ticker.

10 Contract checklist with Full signing process/ workflow

11 Contract checklist as simplified workflow

12 Checklist example of a frameworkagreement with Signing outside of CTM. All signing of the contract is taking place outside of CTM, the contract is available within CTM for contract repository purposes. The information and status of the contract can be changed at any time without require any re-signing of the contract. After that you have set the contract as status signed (in the checklist) The supplier(s) will have view possibility of the contract information and can download the contract (that they have already signed manually) if attached as document by the buyer in the checklist Set-up contract add-ons From the contract checklist, click the Edit link next to Set up contract add-ons Fig 24. Edit the add-ons within a contract

13 The external can only be edited until the contract is final. The internal add-ons can be edited at any time within the contract process. You can search on contract add-ons in the contract list. The actual add-on alternatives can only be created by the system administrator/super user at your company. See Administrator guide for more details Attach contract documents If desired there is a possibility to attach additional documents other than the ones within the tender management process. You can attach two types of documents, contract documents that can be downloaded by suppliers and will be part of the contract and you can attach internal documents. The internal documents will not be visible to the suppliers and can be uploaded at any phase of the contract, it will not affect the contract status. To attach contract documents: 1. From the contract checklist, click the Edit link next to the Documents section. 2. Click the [Upload files ] button and select the documents to upload from your local computer and click [Upload] 3. Files are uploaded to the contract, click [Close window] when finished uploading contract documents. Internal information: Information entered in this section is only visible for all internal staff that has access to this contract, this information is never visible for the supplier. Once you enter the link to write any internal information such as call-off rules etc you can also find an additional text box where you can enter keywords that can be searched for in the contract master list Create cover letter The cover letter is the letter to be sent to the selected supplier of the contract together with the contract draft. To create the cover letter: 1. From the contract checklist, click the Edit link next to the Cover letter section. 2. Enter any text within the cover letter. You can also use variables to add, for example the name of the contract from the application instead of filling in the name yourself. If the company administrator has created any templates, click the [Load template] button to fetch from archive. When finished with the letter click [Save] and [Close window] to go back to checklist Assign a contract manager A Contract Manager can be assigned for a contract, in addition to the Contract Owner.

14 The owner is automatically set when the owner is created, while the manager has to be set manually as all other permissions. Both owner and manager can be assigned from the same window where you set all user access for a contract. Assigning a manager will automatically give it editor permissions on the contract. Both owner and manager will now be visible on all relevant pages, for both parties, including the contracts overview, contract details, when choosing message recipients, etc. For all existing contracts the owner has been assigned as manager Create multiple suppliers draft contract To create a contract with several suppliers: 1. Click on the {Contracts} tab for the Tender you wish to continue with a contract process. 2. Click on the [Create contract ] button. The create screen is displayed. 3. At Type of contract, click yes that several suppliers and select the LOT that you wish to include in the contract (generally you will here select all)

15 Suppliers awarded to tender are listed together with the packages the supplier is awarded for, selection of suppliers and packages are made in the screen above and at least one package have to be selected. If no package is selected for a supplier, the supplier will not be included in the framework contract. Packages/suppliers may be added and removed in a later stage as well. 4. The status of a contract is now Created and you have arrived to the checklist

16 4.2 Communicate and sign the contract with the supplier (full signing process) After initial creation of the contract you should communicate the draft contract with the supplier and sign the final contract Send draft contract The supplier does not know of the award and the draft contract until you send the draft to the awarded supplier (unless you have informed the supplier outside the system) NOTE! If an approval workflow has been set up you can be prompted to send an approval to assigned approvers prior to sending the draft contract. To send the draft contract (when you have NOT selected simplified workflow or signing outside CTM)

17 1. From the contract checklist, click the Send link next to the send draft contract section within the checklist. The message, which will be sent as an are displayed. 2. Click the [To ] button and select the recipients of the draft contract. Click [Select]. 3. Fill in any text within the open field and click [Send message] to send message/ and also the notification of the contract draft. 4. The Status changes to Draft sent to supplier 5. When supplier has accepted the Status changes to Draft acknowledged by supplier 6. If the supplier has chosen to decline the draft version of the contract the status changes to Draft declined by supplier. 7. Make necessary changes of the contract. The status changes again to Created and needs to be resent to the supplier. After sent the status changes one more time to Draft sent to supplier etc Flag contract to final When the supplier has accepted and signed the draft contract, the next step is to save the contract as a final version. Saving as a final version can only be done once and isn t available until draft is accepted by the supplier. To flag a contract as fina: A contract within the Alcatel directive cannot be flagged as final until the the standstill period is over. 1. From the contract checklist, click the Edit link next to the Final contract created. The contract details page will be shown in a non-edit mode 2. Click the [Save as final] button and the contract is saved as final. If you will make any changes to the contract at this stage, it will be re-flagged to a draft version,(if you use full signing process) and you ll need to send the draft for accepting to the supplier again. If you use simplified process or signing outside CTM the flow is ready and final by you simply setting it as final on this point. To send the final contract (only in full signing process)

18 1. From the contract checklist, click the Send link next to the Final contract sent to supplier. The message, which will be sent as an are displayed. 2. Click the [To ] button and select the recipients of the final contract. Click [Select]. 3. Fill in any text within the edit field and click [Send message] to send the final contract to selected recipients. 4. The status changes to Final sent to supplier. 5. Once the supplier noticed the final contract you will receive an automatic /message of the acknowledgement and the status changes to Final acknowledged by supplier Create and send regret letter When the awarded supplier has been informed and acknowledged the final contract, it is time to send the regret letter to the suppliers not awarded the contract. To create the regret letter: 1. From the contract checklist, click the Edit link next to the Regret letter section. 2. Enter any text within the regret letter. You can also use variables to add, for example the name of the contract from the application instead of filling in the name yourself. If the company administrator has created any templates, click the [Load template] button to fetch from archive. When finished with the letter click [Save] and [Close window] to go back to checklist To send the regret letter: 1. From the contract checklist, click the Send link next to the Regret letter section within the checklist. The message, which will be sent as an are displayed. 2. Click the [To ] button and select the recipients of the regret letter. Click [Select]. 3. Fill in any text within the open field and click [Send message] to send message/ and also the notification of the contract regret Publish the award Within public procurement the buyer is obliged to publish the award. Currently we support six sites for publishing a contract award publication:

19 Eu-supply site or client site The local publishing to the eu-supply site and the client site. From this publish page the suppliers can go in directly and accept the public invitation and start working with their responses. OJEU The official journal and publication place within the EU. All public tenders within the European Union must be published to OJEU, or TED/SIMAP as it also is called Doffin Norwegian official publication site for publication of tenders within Norway. If the tender is above EU threshold value it publication will be automatically sent to SIMAP for publication via Doffin. BOAMP French publication site for all public tenders within France. The BOAMP has a connection to SIMAP and a publications made to BOAMP are automatically published to SIMAP as well. Udbud.dk Danish publication site for all public tenders within Denmark. Udbud.dk has a connection to SIMAP and a publication made to Udbud.dk is automatically published to SIMAP. Aanbestedningskalender (ABK) National publication system for Netherlands. Publications above threshold value is automatically send to SIMAP for publication by the ABK Depending on modules installed and country origin you may or may not see all publication sites. To publish the award 1. From the contract checklist, click the Publish link next to the publish section, list of pre-defined publish sites are displayed. 2. To add additional sites, click the [Edit ] button 3. Set the publication date, same date for all publish sites, select the desired publish sites and click [Save]. 4. If selecting OJEU as publication site, you ll need to fill in a form prior to publishing the Tender. Click the [Edit ] button next to the publication site and fill in the form. 5. When finished with the form, click the [Publish] button. The form and publication notification will be sent and the contract award will be published on the set date. 4.3 Working with a contract After contract final has been signed (and during signing as well) by the supplier you can go into the main contract section and create variations, evaluations, assign tasks and send messages. Created contracts can be reached from the Contracts link on the home page or within each Tender.

20 Go to the desired contract from the list by clicking the link in the name. The main contract page consists of a printer friendly version page, and the parts are divided into tabs, same as within the Tender. You also have an excel report that can be created from the contracts list. Fig 9. Contract master list with new Excel report The result report looks like below, the gray lines are framework contracts and their sub contracts.

21 The edit checklist can be reached from all tabs and the [Edit from checklist ] button Contract amendments Variations can be added to a contract. The variations can be of two types VI Tender and emergency variation VI Tender The VI Tender is a bigger change to the contract and needs to be negotiated more in detail with the supplier. When initiating a VI Tender the tender process will start again and any amendments to the contract are added. Emergency variation A smaller variation/change to the contract and can be handled without initiating the Tender process again.

22 To create a VI Tender to the contract: 1. Go to the contract and the { Amendments } tab. The amendments overview is listed. 2. Click the [Initiate VI Tender] to start the variation process. The create Tender page is displayed, fill in the values and edit the Tender as done within the tender process 3. The only supplier to add and invite is the one selected for the contract. To create an emergency variation: 1. Go to the contract and the { Amendments } tab. The amendments overview is listed. 2. Click the [Create emergency variation]. The variation details page is displayed 3. Fill in the fields and click [Save]. 4. Attach any documents to the variation. 5. Send the variation to the supplier by clicking the [Send draft to supplier]. The supplier is informed and needs to accept the variation and the variation have to be saved as a final version and the final version have to be accepted by the supplier for the variation to be completed. Amendmends tab overview To create an emergency variation with packages/lots

23 When creating an amendment RFT from a framework contract (connected to RFT), it is possible to select what packages to include If user selects option Add all : All packages and suppliers included in the contract with more than one supplier will be added to the amendment RFT. If the user selects this option, the amendment RFT will be created exactly as in prior version 6.7 of CTM. If user selects option Packages and specifies what packages to include, only these packages will be included in the amendment RFT and those suppliers selected against each package for sub contract, the sub contract have to be final in order to be part of the amendment RFT Contract call-off When you create the contract you must select what type of call off procedure you want to be possible within this particular contract. This is Explained in the beginning of the contract creation. Call-Off Type Mini-competition Allows for creation of mini-competitions from the contract tab called Call- Off Ranked Ranking will allow for setting rank on suppliers within a multi-supplier contract and also disable the possibility to do any mini-competitions. Call-offs will be done outside of CTM. See section below for more information about ranking.

24 Combination Allowing a combination of those, i.e. possibility to set rank on suppliers and also allowing the mini-competition Ranked with distribution key - Allows ranking to be set on the Contract and any additional comment about distribution key. Framework agreement with one supplier One supplier tied to framework Other None of the above-a help text will appear suggesting you can enter information in the internal information field from the contracts checklist. If you have selected Mini-competition or Combination you will see the tab called Minicompetition, if selected Ranking, this tab will not be visible. You will only be able to create a call-off from a contract that has status set as final. Click on create mini competition Select if you want to create mini-comp for all packages (if several available) or for only one of the packages (lots) click Save Give your mini competition a name, select the process template (created by your administrator) that is called Mini-competition or similar appropriate name given within your organisation and continue with this as normally (tender checklist etc) The mini competition will NOT appear on your list of tenders-it is only available from the contract it belongs to.

25 4.3.3 Contract Collaboration There is a possibility for the contractual parts (supplier and buyer) to exchange and save documents, for purpose of for example placing invoice or filling out self evaluation etc. Contract Collaboration area can be found under the tab of the same name see screen below: The parts that have access to the contract collaboration area are the same as the ones that have rights on the contract in general-from contractual phase. Contract Collaboration is a separate module upon request Tasks Within contract management as well as within tender management different tasks can be assigned to users within the company regarding the contract.

26 To create tasks and assign to users within the system: 1. Go to the contract and the { Tasks } tab. 2. Click the [Add task ] button. The create task screen is displayed. 3. Select the task type in the drop-down, and click [Save/Notify]. The company administrator within your company can set up task types for you to choose from. 4. Select the user to assign the task to in the drop-down and select the start and enddate for the task for when the user should be completed with the task. Click the [Save/Notify] button to send a message informing the user about the task. A status of the task completion is shown in the list of tasks. If you have a task type that needs to be sent to an external person (no access to the system) it is possible to send to external address; see below An additional free text field is added when creating a task (internal or external). The free text can be used in as a variable ($free_text) when creating a message template for the event Task assigned.

27 1. See also section 9,6 about My Tasks Supplier evaluations After a delivered contract there is the possibility to evaluate the supplier performance in the contract. The evaluation is made by creating evaluation questions which are sent to evaluators within your company. To create and send a supplier evaluation to evaluators:

28 1. Go to the contract and the { Evaluations } tab. 2. Click the [Create evaluation ]. Fill in the short and long description and click [Save]. 3. Add evaluation questions by clicking the [Create/Edit questions] button. Questions can be added from a template or directly on the evaluation. For more detailed information about creating and adding questions, see the Questions section within tender management section 4. Start assigning evaluators by clicking the [Assign evaluators ] button. The invite screen is displayed 5. Click the [To ] button to select evaluators. The list of users listed is those who have access to the contract. Select the persons to evaluate the supplier and click [Select]. 6. Click [Invite] to send the evaluation to them. The message will be sent as an and message on the site alerting them of the evaluation to be made. 7. When the evaluators have completed the evaluation there is a link next to the evaluator name in the evaluation page Contract expiry alerts When the contract is reaching the expiry date, there is a possibility to set alerts to be sent warning about the contract expiry. The alert will be sent as an to the users set up to retrieve the contract expiry alert. To set up a contract expiry alert: 1. Go to the contract to set up alert for. 2. Click the [Alert ] button at the top information bar. List of users is shown. 3. Select the users to receive the alert, set days prior to contract expiration for the alert to be sent and click the [Save] button. The alert is sent as an to the user s address set up within CTM. 4. You can at any time go in and add or remove users from the alert list.

29 4.4 Import a contract master list The system offers you to import a contract master list of ongoing or signed contracts from Excel. Contracts imported can be used as any other contracts within the system. There is an Excel template example available for download. To import a contract master list: 1. From the home page, click on the My Contracts link. The contract list screen displays. 2. Click the [Import contract master] button. You can select the contract type and the master file to import from you local computer. The contract type is for you to choose whether the imported contracts should be editable or not. All contracts imported are completed and awarded contracts. Using the editable selection enables you to edit the contract by adding a supplier and uploading documents. The contract cannot be sent to the supplier for signing as it is already signed.

30 3. Select the file to import and click [Import]. The file starts to upload and a validation of the data entered is made. If any of the contracts is not filled in properly the contract master file cannot be imported. You may need to update the Excel-file and re-import the file for validation again. 4. When the validation of the data is OK, click the [Proceed] button to fully import the list of contracts. The imported contracts are imported and listed under respectively tab in the contract list.

31 General user information 4.5 Edit user profile You as the logged in user have access to settings and the details regarding your user profile and can also change them on the site. To edit user details: 1. Select Personal profile from the Navigation dropdown. The user details screen is shown 2. Click on the Edit link by the User profile to change user details, such as user name, password, time zone, notification settings, preferred language etc. Change the settings and click [Save]. Notification settings Notifications are events happening on the system and how you would like to be notified about them. A system message is always sent for a notification, you can choose for each of the notifications if you would like to receive an as a notification as well. Active X settings ActiveX is control which can be downloaded and installed on your computer to gain access to additional functionality within CTM, the ActiveX s are only available on a client Windows platform using the Internet Explorer as web browser. To be able to install the ActiveX you need to have access to install programs on your computer, i.e. being a power user or computer administrator. To install the ActiveX s one by one, click the [Load] button next to each of the ActiveX. You can also install them all by downloading the complete installation Lot and install.

32 If you do not have access to install programs, you can download an installation Lot and ask your local support to install the ActiveX-Lot. The below ActiveX s are currently available ActiveX Analytical engine Upload manager Chart FX CAPICOM Flash Digital signature utility Description The analytical engine is used within an Tender to score and evaluate responses received from the suppliers. Developed by eu-supply The upload manager is a tool to upload multiple files and folder structures from you local disk to any of the document archives on the system. Developed by eu-supply The Chart FX is used within the eauction module to display a graph of bids which has been placed during an auction Developed by Software FX The Capicom is used to create digital signatures to be used on the site Developed by Microsoft The Flash is used to display graphics, for example in a supplier profile and the map-chart. Developed by Macromedia Digital signature utility allows you to digitally sign documents and supplier responses on the site. Developed by eu-supply Certificate There are two types of certificates you can upload to your user profile (i) Using when logging in and signing contracts (ii) used for encrypting and decrypting the tender box within an Tender. i The digital certificate to be used when logging in and signing contracts are uploaded from the page where you edit the main user information such as time zone and language. ii - Digital certificate within the main view are used when encrypting and sending envelopes as part of an Tender, when using the offline editor.

33 4.6 Digital signatures Within the system you can use and set different variations of certification to be used for digital signing. These can be set on country level and on organization level. Below you see that these settings appear and are possible to set (if you have the digital signature module) within the procedure template. The setting for allowing letter of authentication can also be set in the procedure template. If you have any of these you will automatically have the other setting. If the template are set up that this should be editable on each occasion you will as a normal user be able to decide for each tender if you wish to allow/force any of these functions. See bottom lines.

34 If the letter of authentication setting is enabled, the supplier will be able to choose to either sign the res anyway and instead send a signed letter of authentication as fax or regular mail It is now also possible to sign with ANY digital certificate installed on the client computer. Note! There is still a setting that can be enabled to force matching certificate on user profilen, for marke option.

35 This is the supplier page where you can see that the supplier gets information and a button to print the authentication letter if you have chosen to let them respond this way. As a buyer, you will be able to distinguish supplier responses submitted with a digital signature from the ones with letter of authentication. And when opening the responses, you will also be able to verify that the letter of authentication matches the online information by comparing the generated hash key (see next page)

36 If you find the same signature (hash code authentication sent by the supplier, and o verified that the response has not been a authentication letter was printed Verification of digital certificate against external validation service It s possible for buyers to validate the certificate used by suppliers when sending the proposal against an external validation service (Unizeto). Suppliers can also check any certificate before sending the proposal if the certificate is valid. On the supplier side there is also a link to view the certificate used for signing. Buyer side: Clicking on the digital signature icon will show the certificate used for signing and validation of the certificate will be done against an external validation service.

37 Supplier side: Suppliers can test a certificate against an external validation service Suppliers have the possibility to view the certificate used for signing. Checking certificate against an external validation service

38 4.7 Reporting The CTM application supports different types of reporting. If running the solution using own HW infrastructure there is the possibility to develop any own reports desired. If running hosted we can also provide reports meeting almost any needs. The standard configuration includes a set of reports using XSL/XML or Excel. We are happy to tailor additional reports using this technology or integrate standard reporting tools on a need basis such as Crystal Reports or Business Objects. You can also reach tender specifik reports from the Reporting tab within the tender

39 4.8 My tasks From the home page a link is available to My tasks. This shows an overview of the tasks that the logged in user is involved in. The user that is the owner of the contract can assign tasks to different users and external persons. The tasks assigned to other users by the logged on user can be viewed on the tab { Sent requests }. There, the owner of the task is shown together with start and end dates. The external sent tasks appear at the senders list to set at ready (this due to fact that external person has no access to system thus the task could otherwise never be set as completed) The user that has been assigned different tasks can review the list of tasks as well. On the tab { Received requests } are the tasks that can be assigned to this user by other contract owners. When a task is set to complete by the assigned user, the task will be taken off the Requests tab. It can then be found on the { Completed } tab instead.

40 4.9 Other areas This section describes the areas not covered in any section above Contract number (separate module) Contract number is a property on a contract, it is an editable field and is default set to <contract reference> - <ctm internal contract id>. The purpose of the field is for the contracting authority to have a field which can be used both as reference and unique id at the same time. Reference is defaulted to contract number for Amendment RFT contracts if you have the contract number functionality switched on. When creating a contract for an Amendment RFT the reference field will be defaulted with the contract number from the awarded supplier s base contract (the contract the amendment RFT was created from). Below is a schematic image on how the contract numbers and references are pre-filled

41 All related contracts (contracts that are created on the same base RFT, including amendment RFT contracts) are listed in the Main contract page for a supplier. Ensuring the supplier finding of any related contracts

42