How To Wear An Academic Dress And Hood For A Senior Year Of High School

Transcription

1

2 BACHELOR S ACADEMIC DRESS (i) Gown pleats yoke The sleeve looped up with one button on the outside with twisted cord sleeve bottom of sleeve fold (ii) Hood lining of hood according to Faculty colour (iii) Mortarboard cowl end of hood Tassel on the right

3 Step 1 Iron (low heat) or steam the academic dress and hood before use.

4 Step 2.1 Put on. Please note its distinctive feature*. *The sleeve looped up with one button on the outside with the twisted cord

5 Step 2.2 Fasten together by using the: (i) Zipper (Gown Type A) or (ii) Hook & eye (Gown Type B) Gown Type A: Zipper Gown Type B: Hook & Eye

6 Step 2.3 Adjust the pleats of until it rests neatly on the shoulders. Pleats 2.3 Adjusting to the correct

7 Step 3.1 Place the hood over the shoulders with the V end of the hood facing front.

8 Step 3.2 Secure the hood to by fastening its hook onto the: (i) Puller of the zipper (Gown Type A) or (ii) 1st Hook & Eye of (Gown Type B) 3.2 Attaching the hood to Gown Type A: Puller Gown Type B: 1st Hook & Eye

9 Step 3.3 To prevent the hood from slipping off the shoulders easily, use (i) the Velcro on (Gown Type A) or (ii) safety pins (Gown Type B) and secure it to. 3.3 Securing the hood to Gown Type A: Velcro Gown Type B: Safety Pin

10 Step 4.1 Place the with the longer end at the back. The tassel should be on the right hand side of the board. Back Front

11 Enjoy your Commencement!