Multi-room, multi-image display processor

Transcription

1 Multi-room, multi-image display processor Unlimited sizing and repetition across all displays

2 KAEIDO X Unlimited sizing and repetition across all displays Kaleido-X sets a new standard for signal flexibility among multi-room, multi-image processors. Any of its 96 inputs can be displayed, any number of times and at any size, over eight monitors without grouping restrictions. And the picture quality has to be seen to be believed. Unmatched flexibility Superior display Multi-room architecture Kaleido-X can display any of its 96 HD/SD/Analog inputs, any number of times, at different resolutions and sizes up to full screen, over 8 monitors without grouping restrictions. Highest quality multi-image output without compression, with superior on-screen graphics, for the most critical monitoring applications. Expandable multi-room architecture, based on a chassis with 96 inputs and 8 independent multi-image display outputs. expandable Kaleido-X processors can be linked together to create large multi-processor systems, which can fully address the very largest monitoring requirements. multi-room layouts Intuitive multi-room layout editor simplifies the sharing and presentation of sources across multiple areas audio channels Unprecedented audio performance with the ability to monitor up to 2304 channels of audio, including embedded, discrete, or discrete analog. built-in router Built-in router with access to any unprocessed HD/SD-SDI input for feeding monitors, test equipment, and ISO recorders. 96 inputs, 8 multi-image outputs, expandable router outputs Highly robust Highly robust design, with multiple points of redundancy, and no single point of failure for reliable 24/7 operation.

3 Multi-room, production monitoring using one Kaleido-X processor oom 2: Production Control oom : Audio Audio phase correlation meters 6:9 and 4:3 signals simultaneously Safe title area markers HD/SD/Composite signals Multi-channel audio meters Clocks and timers oom 3: Camera Shading / VT Kaleido-X offers highly effective, multiroom production monitoring, with fully independent display layouts and control panels in each room. The monitoring Tallies linked to switcher sources UMDs linked to mixer sources Native HD/SD-SDI CD display fed by internal router outputs Display layout selected from switcher, control panel or mouse Aspect ratio markers andscape or portrait display orientation displays can be quickly reconfigured for different productions, with full flexibility over window positioning and sizing. The Native HD/SD-SDI to scope fed by internal router outputs processor s high quality multi-image outputs also make it ideal for the most critical live monitoring applications. Compact control panel connected to main frame via ethernet XEdit multi-room layout editor software Display reconfiguration direct from production switcher Kaleido-CP2

4 Multi-channel, master control monitoring using one Kaleido-X processor Kaleido-X s flexible architecture makes it highly suitable for multi-pod master control monitoring applications. Each pod can have an independent display layout, with independent control using a dedicated remote panel. All sources can be shared across the pods, which allows easy reconfiguration of the pods to handle more or fewer channels, as commonly happens during night shifts with reduced operator crews. Pod : HD channel monitoring Pod 2: HD/SD channel monitoring Pod 3: HD channel monitoring Display layout selected from control panel or mouse Audio phase correlation meters Clocks and timers Multi-channel audio meters HD/SD/Composite signals andscape or portrait displays directly rendered (no external rotators) Picture-in-picture facilitates returns monitoring UMDs linked to router sources PresStation Master control & branding panel Kaleido-CP2 Compact control panel connected to main frame via ethernet

5 Unmatched flexibility Any source HD-SDI 080i 50/60 SDI 525 / 625 Analog NTSC / PA / SECAM DVI Auto-sensing inputs allow multiple source formats to be combined effortlessly. Kaleido-X offers unmatched signal flexibility for more effective monitoring workflows. Each video input to the frame can be displayed any number of times, in any size, across 8 displays of any resolution and orientation, without blocking or grouping restrictions. Any resolution 920 x x x x920 Projection cubes Users can instantly change layout configurations, and dynamically zoom one source larger for quality control, or audio monitoring of an on-screen source. These operations can be performed swiftly using an easy to use remote control panel, or an on-screen mouse action. 920 x x 200 Simultaneously display across monitors of different resolutions up to 920 x 200, and display across flat panels and projection cubes. Any size Signals can be displayed at any size up to full screen Any repetition Sources can be repeated and positioned freely across multiple displays Any format 4:3 + 6:9 andscape Portrait Signals of different aspect ratios can be displayed alongside each other, and the displays can be either landscape or portrait

6 superior display High quality display Kaleido-X provides the highest quality display, using scaling technology which offers unmatched performance all the way from small size windows to full screen display. Kaleido-X offers the highest quality multi-image output, using Miranda s scaling technology which delivers outstanding results without compression. Windows can be resized all the way from very small windows up to full Configurable audio meters Kaleido-X can display four group, multi-channel audio for multi-lingual and 5. applications. screen display, without the loss of quality that is commonly associated with Audio level meters are extracted from analog, or embedded signals, and can be multi-image processors. This high performance, combined with superior positioned inside the video window in transparency or outside. Ballistics and scales are on-screen graphics, makes Kaleido-X ideal for the most critical monitoring 5. configurable, and a phase correlation meter can be displayed with each pair. applications. Kaleido-X also offers the ease of use you ve come to expect from the Kaleido Dynamically updated text labels family. Simple to use, on-screen drop down menus are contextual to speed Multiple text labels or Under Monitor Displays (UMD) can be displayed inside or outside operations, and offer numerous functions, such as changing aspect ratios, the video window, with the text updated by a UMD controller. Dynamic text can be driven checking the safe area, assigning an input, and changing text in a UMD. by the most popular routers and by some automation vendors. Kaleido-X also provides dynamic text support and a tally interface with oss video switchers and GVG s Kalypso and Zodiac switchers. Text can be edited using an on-screen mouse and keyboard, and text fonts are fully selectable and feature Unicode support. Aspect ratio and safe area markers Aspect ratio and safe area markers can be positioned over video windows to simplify multi-format monitoring. Analog and digital clocks Multiple analog and digital clocks/timers with date can be displayed with programmable offsets and configurable colors. The clocks/timers can be driven by, referenced internally, or to an NTP server. Each output module features three independent inputs. 0

7 multi-room architecture PUTS Kaleido-X s highly expandable, multi-room architecture is based on a 7U chassis with up to 96 auto-sensing inputs, 8 independent multi-image display outputs, and up to 48 unprocessed router outputs. CONTO DXF-00 Optical DVI extension High esolution DVI + GBHV Outputs Drive multi-image mosaics into displays Analog/Digital HD/SD-SDI outer Outputs Drive full resolution HD/SD-SDI signals into video monitors, test equipment, or production mixers Audio Monitoring Outputs All the multi-image display outputs can be grouped to create large, highly integrated monitoring systems. Alternatively, outputs can be controlled independently for multi-room environments, using one or more remote control panels. Multiple remote panels can be configured to control a portion of the system so multiple operators can each control their portion of the monitor wall. In larger Kaleido-X systems, there is often a requirement for long DVI connections to displays, and this is simplified with the DXF-00 optical DVI extension module. The DXF-00 is a small and cost-effective, single fiber solution for supporting high quality, high resolution (920x200) displays over distances of up to 3300 feet (000m). K-CP2 multi-image display remote panel keyboard and mouse CP-040 router remote panel S-422 USB Ethernet DVI background input Dual Output Multi-Image Processor Modules Up to 8 Outputs / Frame Universal Input Modules 6 Auto-sensing Inputs / Module Up to 96 Inputs / Frame 4 6 HD/SD-SDI outer Modules (Option) 24 Outputs / Module Up to 48 Outputs / Frame GPI I/O and Genlock Module (Option) 2 Frame Expansion (future) XEdit layout editor software... 6 Video Inputs (Composite/SDI/HD-SDI) Embedded Audio Extraction Audio Bridge Terminal 28 Channels / Terminal, up to 768 Channels / Frame Configurable GPI Input/ Outputs Multi-format eference Input PUTS HD-SDI Analog Stereo/ Discrete Audio Inputs DVI KXI-DVI-Bridge Dual channel DVI inputs with loop out Kaleido-X features a highly expandable, multi-room architecture 2 3

8 5 expandable 68 video inputs 8 multi-image outputs 2 6 Multiple Kaleido-X processors can be connected easily to create large systems which can fully address the very largest monitoring requirements. For instance, eight Kaleido-X processors can be connected, using tie-lines 28 router inputs from other 7 frames (4 from each frame) ( frame ) router 28 router outputs feed other 7 frames (4 per frame) from the built-in routers, to create a high performance system with 544 video inputs and 64 multi-image outputs in total. This configuration also yields 60 additional router outputs for feeding other displays and monitoring equipment. With this large system architecture, the input signals can be shared across the entire system, offering a highly versatile monitoring environment. 68 video inputs 28 router inputs from other 7 frames (4 from each frame) ( frame 2 ) router 8 multi-image outputs 28 router outputs feed other 7 frames (4 per frame) video inputs 8 multi-image outputs router inputs from other 7 frames (4 from each frame) ( frame 8 ) router 28 router outputs feed other 7 frames (4 per frame) Connecting 8 Kaleido-X processors to create a system with 544 inputs and 64 outputs 4 5

9 multi-room layout editor XEdit layout editor allows fast creation of complex, multi-room display layouts Kaleido-X s multi-room layout editor simplifies the sharing and presentation of sources across multiple areas controlled by multiple operators. The XEdit layout editor allows non-technical operators to easily create complex multi-room layouts combining all essential display elements, including analog and digital clocks, audio level meters with various scales, and flexible UMDs and tallies. The editor encourages rapid drag and drop layout creation, with automatic resize and alignment tools for easy optimization of the monitor wall space. The physical arrangement of multiple displays in a room is reproduced in XEdit for an absolute WYSIWYG generation of the layout. AN / WAN Comprehensive integration with routers and switchers for dynamic text labeling and tallies Efficient logical source configuration allows easy reuse of source groups and provides quick assignments in various layouts ibrary of monitors with display dimensions and resolutions provides intelligent management of displays Physical display arrangement is reproduced in XEdit for an absolute WYSIWYG generation of the layout of all the displays in a given room Simple drag and drop layout creation, with automatic resize and alignment tools for easy optimization of the monitor wall space 6 7

10 2304 audio channels Kaleido-X offers unprecedented audio performance with the ability to monitor up to 2304 channels of audio, including embedded, discrete, or discrete analog. The amount of cabling needed for discrete (non embedded) audio is minimized by the Audio Bridge Terminals, which accept analog (balanced or unbalanced) and digital audio (75 or 0 ). The Audio Bridge Terminals can fit in the back of racks, and can be located up to 800 feet (250m) away from a Kaleido-X frame, with connection over standard video coax. With this configuration, it is no longer necessary to route individual audio signals to the multi-image processor/router. The slim Audio Bridge Terminals offer highly space efficient monitoring of up to 768 discrete audio channels per frame Audio Bridge Terminals offer two coaxial outputs which provide redundancy and allow audio inputs to be shared among multiple frames. Power for the Audio Bridge Terminals originates from external supply or from the Ethernet switch, using the Power over Ethernet standard. Multi-channel audio monitoring with Kaleido-X 8 9

11 built-in router The built-in router improves integration, and reduces cabling and equipment costs. The routing capability eliminates the need for a separate router in the following applications: Uniquely, Kaleido-X features a built-in router which eliminates the need for separate routing in control rooms, and provides a significant cost saving. Up to 48 unprocessed, baseband outputs can be provided from any of the 96 HD / SD-SDI inputs of the processor. These outputs can be used to feed high quality CT monitors, test equipment such as waveform scopes, as well as ISO recorders. The outputs can even feed other multi-image display systems. The router outputs can be controlled by on-screen menus, a remote panel, and by the iouter application. Additionally, the outputs can be selected by the production switcher s auxilliary bus controls. 2 Feeding baseband high quality monitors anywhere in the facility Feeding test equipment for quality control monitoring 3 Feeding a secondary multi-image display processor for output expansion 8 multi-image outputs 96 inputs KAEIDO-X 48 Up to 48 unprocessed HD/SD-SDI outputs Kaleido-Alto-HD 4 Feeding an ISO recorder in production studios outer panel 20 2

12 highly robust Kaledio-X features a highly robust design, with multiple points of redundancy, and no single point of failure for reliable 24/7 operation. The 7U frame uses front loading, hot swappable modules and power supplies. All modules are independent, and there is no single module that can cause the system to fail. Each output module has its own processor, operating system and external connections. Kaleido-X also offers multiple failover scenarios, an easy upgrade process, and detailed system status and logging. The processor uses a real-time inux based operating system, and data is distributed for redundancy. Kaleido-X rear view ear view GBHV 2 ETHENET OPTION GBHV 2 OPTION 2 DVI-D DVI-D USB S-422 HD/SD SDI DVI- 2 DVI-D HD/SD SDI 2 2 GBHV 2 ETHENET OPTION GBHV 2 OPTION 2 DVI-D DVI-D USB S-422 HD/SD SDI DVI- 2 DVI-D HD/SD SDI 2 2 GBHV 2 ETHENET OPTION GBHV 2 OPTION 2 DVI-D DVI-D USB S-422 HD/SD SDI DVI- 2 DVI-D HD/SD SDI 2 2 KXO-DUA-DVI- KXO-DUA-DVI- KXO-DUA-DVI- KXO-DUA-DVI- KXI-6- KXI-6- KXI-6- KXI-6- KXI-6- KXI-6- GBHV 2 ETHENET OPTION GBHV 2 2 OPTION 2 DVI-D DVI-D USB S-422 HD/SD SDI DVI- 2 DVI-D HD/SD SDI SDTI SDTI SDTI SDTI SDTI SDTI KXO-24 E KXO-24 E KXA-GPI- GEN- EF PUT GPI A -24 GPI B -24 GPI C -24 Frame KXA-F7 Output Module KXO-Dual Input Modules KXI-6HSV KXI-6HS KXI-6SV KXI-DVI-Bridge Audio Options KXS-HD-EMB KXS-SD-EMB ABT-64A ABT-28A ABT-64D-0 ABT-28D-0 ABT-64D-75 ABT-28D-75 outer Modules KXO-24HD-outer KXO-24SD-outer Other Options Kaleido-CP2 KCP-K2 KXS-otator KXA-GPI-GEN- KXA-TBA-G KXA-PSU DXF-00 KXS-CT/UMD-Device* KXS-Tally-Devices* Kaleido-X ordering information Multi-Image Processor 7 U Frame The 7 U frame is equipped with redundant power supplies and includes the XEdit layout editor software and the XAdmin administration software. The frame accommodates up to 6 video input modules, 4 outputs, 2 router modules and one GPI I/O and Genlock Module Option. Dual Head Output Module 6 HD/SD-SDI and Composite Input Module 6 HD/SD-SDI Input Module 6 SD-SDI and Composite Input Module Dual channel DVI to HD-Bridge HD/SD-SDI Input Embedded Audio Extraction (/module) SD-SDI Input Embedded Audio Extraction (/module) 64 Channel Analog Audio Bridge Terminal 28 Channel Analog Audio Bridge Terminal 64 Channel 0Ω Audio Bridge Terminal 28 Channel 0Ω Audio Bridge Terminal 64 Channel 75Ω Audio Bridge Terminal 28 Channel 75Ω Audio Bridge Terminal 24 HD/SD-SDI outer Output Module 24 SD-SDI outer Output Module Ethernet emote Control Panel Kaleido-CP2 ack Mount Bracket otation icense for Portrait Display (/output module) GPI I/O and Genlock Module Option GPI I/O Terminal Block Adaptor eplacement Power Supply Module Optical DVI Extension Kit (Includes Optical Tx And x Modules) outer Control Interface, Includes Dynamic Text And Cross Point Control icense (/frame) Production Switcher Interface, Includes Dynamic Source/Output Texts And Tallies icense (/frame) * Contact your Miranda representative for list of supported devices 22 23

13 The most comprehensive range of multi-image display processors Capabilities per frame Kaleido-X Kaleido-K2 Kaleido-Alto-HD Kaleido-Quad-HD Multi-image display outputs Up to 8 Up to 2 Inputs per processor (up to 30 with cascading of 3 processors) 4 Formats accepted HD, SD, Composite (autosensing), DVI background HD, SD, Composite, Y/C, GB Progressive, VGA HD, SD, Composite (autosensing), DVI background HD, SD, Composite (autosensing), DVI background esolution of multiimage outputs Up to 920 x 200 Up to 920 x 200 Up to 920 x 200 Up to 920 x 200 outer outputs Up to 48 None Audio inputs Supports embedded audio inputs plus up to 768 discrete channels of or analog audio inputs Supports embedded audio inputs plus up to 48 discrete channels of or analog audio inputs Supports embedded audio inputs plus up to 20 discrete channels of or analog audio inputs Supports embedded audio inputs plus up to 20 discrete channels of or analog audio inputs output rotation Built-in (option) equires external rotator device Frame 7U with hot swappable, front loading cards and PSUs 4U with hot swappable, front loading cards and PSUs equires external rotator device U with redundant PSU option equires external rotator device U with redundant PSU option Corporate Headquarters Miranda Technologies Inc. 3499, Douglas-B.-Floréani Montréal (Québec), Canada, H4S 2C6 Tel: Fax: ussales@miranda.com Miranda USA Tel: ussales@miranda.com Miranda Europe Tel: +44 (0) europesales@miranda.com Miranda France Tel: +33 (0) francesales@miranda.com Miranda Asia Tel: asiasales@miranda.com Miranda China Tel: chinasales@miranda.com Miranda Japan Tel: +8 (0) japansales@miranda.com 24 NOTE: All specifications subject to change without notice Miranda Technologies Inc. All trademarks are the property of their respective owners. Printed in Canada.