CATALOGUE 02/2015 NEW THE VAN RACKING SYSTEM FOR THE MOST EXTREME DEMANDS!

Transcription

1 CATALOGUE 02/2015 NEW THE VAN RACKING SYSTEM FOR THE MOST EXTREME DEMANDS! wwwsortimocom

2 CONTENTS INTRO CONTENTS Building projects worldwide P 4 Sortimo HD - a strong appearance in every sense P 6 A side note: Composite P 7 Sortimo HD Components P 8 Sortimo HD Jumbo Unit P 10 Standard blocks P 12 Fiat Scudo, Peugeot Expert, Citroën Jumpy, Toyota ProAce P 14 Volkswagen T5 P 16 Renault Trafic, Opel Vivaro, Nissan Primastar P 18 Mercedes-Benz Vito long P 20 Ford Transit Custom P 22 Citroën Jumper, Fiat Ducato, Peugeot Boxer P 24 Renault Master, Opel Movano, Nissan NV400 P 26 Mercedes-Benz Sprinter, Volkswagen Crafter P 28 SoboGrip ProSafe Floor P 30 SoWaFlex P 32 SoWaApp P 34 Construction site containers P 36 Sortimo HD Accessories P 38 Sortimo HD BOXXes P 42 Metal case P 44 S-BOXX P 46 T-BOXX P 48 M-BOXX P 48 L-BOXX P 49 LS-BOXX P 50 LT-BOXX P 51 i-boxx P 52 HD Case P 52 i-boxx Rack P 53 Mobile Assortments P 54 Original Accessories P 55 Who is behind Sortimo HD? P 56 Sortimo at your service P 57 THE VAN RACKING SYSTEM FOR ALL THOSE WHO NEED IT MORE EXTREME! 2 3

3 BUILDING PROJECTS WORLDWIDE BUILDING PROJECTS WORLDWIDE PEOPLE WILL ALWAYS BE BUILDING THINGS! GIANT MAGELLAN TELESCOPE CHILE Giant telescope Resolution: 10x higher resolution than the Hubble space telescope Start of construction: in the planning stage WE WILL INTRODUCE YOU TO SOME INTERESTING BUILDING PROJECTS FROM YESTERDAY, TODAY AND TOMORROW COLOSSEUM ITALY/ROME Largest antique amphitheatre in Rome Construction time: 8 years Construction costs according to today s standards: 37 billion Euros Completion: 80 AD The building was commissioned by the emperor Vespasian GREAT WALL OF CHINA CHINA Historical border fortification Length: km Construction time: 270 years Workmen: At that time, the building project swallowed up two thirds of the entire national budget The Chinese wall would reach around all of Germany, twice Installation in the highlands of Chile WORLD TRADE CENTER ONE USA / NEW YORK SKY CITY CHINA / HUNAN Skyscraper World trading centre Height: 5413 meters Construction costs: 27 billion dollars Workmen: 1000 Height: 838 meter Usable area: m² Floors: 220 Completion: 2015 AIRPORT MEXICO CITY MEXICO International hub airport Area: km² Construction costs: 7 billion dollars Start of construction: in the middle of 2015 X-shaped building with 95 gates More than tons of steel have been used INGA-III DAM DEMOCRATIC REPUBLIC OF THE CONGO Dam / Hydropower Plant Height: 1007 meters Construction costs: presumably approx 9 billion dollars Completion: 2022 PYRAMIDS OF GIZA EGYPT Tombs of the pharaohs Construction time: 105 years Dimensions (WxLxH) 125 x 110 x 60 meters Workmen: tons of stones have been used After its completion the tallst building in the world KINGDOM TOWER SAUDI ARABIA / JEDDAH Office, apartment and hotel tower Height: 1007 meters Construction costs: 12 billion dollars Completion: 2016 The objective is to make the Democratic Republic of the Congo more independent in the energy sector The architect is Adrian Smith, who has also designed the Burj Khalifa WITH SORTIMO HD YOU CAN FACE ANYTHING! AND WHAT IS YOUR NEXT PROJECT? 4 5

4 A STRONG APPEARANCE IN EVERY SENSE A SIDE NOTE: COMPOSITE SORTIMO HD A STRONG APPEARANCE IN EVERY SENSE A SIDE NOTE: COMPOSITE THE FOUNDATION PILLAR OF SORTIMO HD The Sortimo HD components are predominantly made of composite material This is unique on the market of van racking systems and offers many benefits for you! But what is behind the construction material composite? Fibre composite is a fibre-reinforced material made of high-quality fibres and resin Today, fibre-reinforced materials are applied in the automobile industry when combining light weight construction with extreme strain Innovative vehicle concepts, the sports car industry, the development of the Formula 1 and many high-technology industries have been relying on fibre-reinforced composites for many years EXTREMELY RESILIENT We at Sortimo had recognised the outstanding characteristics of this unique construction material at a very early stage as well With a great deal of effort we have managed, over the last years, to develop a manufacturing method for components made of composite material, which gives us the possibility to offer you this material at the best price-performance ratio SORTIMO HD ALSO IN EXCESS LENGTH! 2 METERS SAFE STORING AND TRANSPORTING OF HEAVY EQUIPMENT AND TOOLS EXTREMELY IMPACT-RESISTANT AND SCRATCH-PROOF ABSOLUTELY STAIN-RESISTANT RESISTANT AGAINST CHEMICAL SUBSTANCES CRASH-TESTED ROBUST HANDLING HIGH DURABILITY ENABLES SEVERAL VEHICLE CYCLES APPROVED SORTIMO QUALITY A SYSTEM WITH INFINITE POSSIBILITIES TE TES ESTED EST TESTED CRASH C All fibre-reinforced composites are manufactured at our headquarter in Zusmarshausen, Germany, in Europe s most modern manufacturing facility for van racking systems Sortimo composites are ultra-high resilient, very lightweight, easy to clean and have a smooth surface, which is extremely robust, not sensitive and scratch-proof In addition, Sortimo composite parts are extremely resistant to oils, petrol, bases, acids and further chemicals the extremely stable composite material as a component of Sortimo HD allows shelf widths of up to 2 m without additional intermediate elements great cost saving due to the renouncement of intermediate elements or additional stiffening elements perfect storing of oversized items 6 7

5 SORTIMO HD COMPONENTS SORTIMO HD COMPONENTS SORTIMO HD COMPONENTS SHELF TRAY HD resilient up to 120 kg divisible with aluminium divider no abrasion of powder or coatings due to solid-coloured composite material stain resilient, scratch-proof and impact-resistant LONG COMPONENTS TRAY HD possible across the entire length of the loading area resilient up to 25 kg no abrasion of powder or coatings due to solid-coloured composite material stain resilient, scratch-proof and impact-resistant noise reducing anti-rattle mat MOBILE ASSORTMENTS wide selection of different BOXXes integration of BOXXes into the van racking system safe and secure transport of small components and tools Selection as of p 42 STANDARD SHELF HD resilient up to 120 kg no abrasion of powder or coatings due to solid-coloured composite material suitable for Sortimo s complete BOXXes programme CASE TRAY resilient up to 25 kg enables the safe storing of all Sortimo cases and BOXXes convenient full extension feature for fast access locks automatically when inserted one-hand operation DRAWER HD resilient up to 90 kg drawer made of high-strength metal with the proven catch bolt locking mechanism extremely robust handle easy unlocking also with work gloves subdividing of drawer possible by means of Inset boxes and divider sets FRAME HD the base for the extremely robust basic structure of the Sortimo HD van racking system the aluminium Spaceframe enables a high stability of the van racking system stain resilient, scratch-proof and impact-resistant ALUMINIUM DROP-DOWN FRONT extremely robust drop-down front made of anodised aluminium horizontal latching enables easy storing and inserting of material loaded BASE PLINTH AND FLOOR ANGLE/RAIL HD prevents the shifting of material loaded on the floor perfectly combinable with the floor lashing rail ProSafe stain resilient, scratch-proof and impact-resistant 8 9

6 JUMBO UNIT JUMBO UNIT SORTIMO HD The XL drawer for Sortimo HD Plenty of storage space and the resilience well-known for Sortimo HD make this product perfect to safely store heavy equipment or bulky materials in the vehicle JUMBO UNIT Ref-No Name Length x Width x Height Weight Jumbo Unit HD xSBL x 3704 x 2484 mm 157 kg Jumbo Unit HD xSBL x 3704 x 2484 mm 214 kg COPES WITH ANYTHING! Jumbo Unit HD xSBL x 3704 x 2484 mm 253 kg Jumbo Unit HD xSBL x 3704 x 2484 mm 206 kg Jumbo Unit HD xSBL x 3704 x 2484 mm 297 kg Jumbo Unit HD xSBL x 3704 x 2484 mm 338 kg XL drawers for your vehicle enables easy and safe storing of large cargo drawer loadable up to 100 kg body resilient up to 100 kg and thus also walk-on-able maximum handling solidity by means of a large handle and extremely strong telescopic slides absolutely stain-resistant Jumbo Unit HD xSBL x 4914 x 2484 mm 183 kg Jumbo Unit HD xSBL x 4914 x 2484 mm 249 kg Jumbo Unit HD xSBL x 4914 x 2484 mm 291 kg Jumbo Unit HD xSBL x 4914 x 2484 mm 249 kg Jumbo Unit HD xSBL x 4914 x 2484 mm 337 kg Jumbo Unit HD xSBL x 4914 x 2484 mm 386 kg fully enclosed two units easily mountable onto each other modular construction kit with infinite possibilities DIVIDERS AND DIVIDER BRACKETS Ref-No Name Matchcode Suitable for the following widths/heights: Divider 62 x 293 TB 1,5-62/293 Width 15 / Height Slotted divider 62 x 414 STB Width 2 / Height Dual divider holder for drawers 63* SBLTB Width / Height Divider 93 x 293 TB 1,5-93/293 Width 15 / Height Slotted divider 93 x 414 STB Width 2 / Height Dual divider holder for drawers 95* SBLTB Width / Height 12 *Every divider requires two divider holders Suitable for the following items: ASSEMBLY SETS Ref-No Name Matchcode Assembly set Jumbo Unit floor plate MO JU BO Assembly set Jumbo Unit bodywork MO JU KA All listed floor plates are intended for vehicles with a sliding door on the right side Sliding door on the left side upon request 10 11

7 STANDARD BLOCKS STANDARD BLOCKS STAN DARD BLOCKS WE HAVE THE PERFECT EQUIPMENT FOR YOU! On the following pages we would like to introduce you to exemplary van racking solutions for many common vehicle models Please find your contact person at www sortimo com/contact Furthermore we would be pleased to provide you with a quotation for your bespoke van racking solution They will be pleased to offer advice and to plan your van racking system individually - perfectly customised to meet your demand W HERE YOU CAN FIND YOUR RACKING SYSTEM MINI Fiat Scudo Peugeot Expert Citroën Jumpy Toyota ProAce p p p p Volkswagen T5 Renault Trafic Opel Vivaro Nissan Primastar Mercedes-Benz Vito long Ford Transit Custom p p p p p p MEDIUM BIG Citroën Jumper Fiat Ducato Peugeot Boxer Renault Master Opel Movano Nissan NV400 Mercedes-Benz Sprinter Volkswagen Crafter p p p p p p p p CONTAINER 20 foot container/trailer p 36 All standard blocks include the innovative load securing system ProSafe in the uprights and floor lashing rails Therefore the lashing of loaded goods has never been easier and more flexible! 12 PROSAFE 13

8 STANDARD FORD BLOCKS TRANSIT CUSTOM BLÖCKE STANDARD BLOCKS VAN RACKING SYSTEMS SUITABLE FOR FIAT SCUDO PEUGEOT EXPERT CITROËN JUMPY TOYOTA PROACE As of model year 2007, wheel base 3000 mm, normal roof, sliding door on the right side BASIC (DRIVER S SIDE) (PASSENGERS SIDE) PREMIUM (DRIVER S SIDE) (PASSENGERS SIDE) BASIC L I 1 BASIC RE 1 PREMIUM L I 1 PREMIUM RE 1 2 Shelf trays 3 Standard shelves with lashing strap ProSafe 1 Standard shelf with 2 S-BOXXes and 2 wide S-BOXXes 1 Standard shelf with 2 L-BOXXes Case clamp 2 Shelf trays with anti-rattle mat and divider set 1 Standard shelf with lashing strap ProSafe 2 Shelf trays with anti-rattle mat and divider set 1 Standard shelf with 2 S-BOXXes and 2 wide S-BOXXes 1 Standard shelf with 2 S-BOXXes and 1 wide S-BOXX 1 Standard shelf with 2 L-BOXXes Drawers 1 Standard shelf with lashing strap ProSafe 1 Case clamp 1 Lashing strap ProSafe 1 Multi-functional Sortimo panel 1 Medium hose holder 1 Shelf tray with anti-rattle mat and divider set 1 Standard shelf with lashing strap ProSafe 2 Drawers 2 L-BOXXes Lashing strap ProSafe 1 Storage pocket 1 Work bench, hinged, with vice W x D x H: approx 1730 x 382 x 1273 mm Weight: approx kg W x D x H: approx 1004 x 382 x 1205 mm Weight: approx kg W x D x H: approx 1730 x 382 x 1272 mm Weight: approx kg W x D x H: approx 1200 x 382 x 1204 mm Weight: approx kg We would be also pleased to provide you with an offer for your individual van racking system solution 14 15

9 STANDARD FORD BLOCKS TRANSIT CUSTOM BLÖCKE STANDARD BLOCKS VAN RACKING SYSTEMS SUITABLE FOR VOLKSWAGEN T5 As of model year 2003, wheel base 3000 mm, normal roof, sliding door on the right side BASIC (DRIVER S SIDE) (PASSENGERS SIDE) PREMIUM (DRIVER S SIDE) (PASSENGERS SIDE) BASIC L I 2 BASIC RE 2 PREMIUM L I 2 PREMIUM RE 2 2 Shelf trays 1 Standard shelf with 4 HD cases 1 Standard shelf 1 Floor angle 2 Standard shelves with lashing strap ProSafe 1 Shelf tray 1 Floor angle 1 Standard shelf with 6 S-BOXXes and 3 wide S-BOXXes 1 Shelf tray 1 Standard shelf with 4 HD cases 1 Standard shelf with 4 L-BOXXes Multi-functional Sortimo panel 1 Medium hose holder 1 Tool strip 1 Shelf tray 1 Standard shelf with lashing strap ProSafe 3 Drawers 1 Plastic storage pocket for paper 1 Storage pocket 1 Work bench, hinged, with vice W x D x H: approx 1972 x 382 x 1289 mm Weight: approx kg W x D x H: approx 1004 x 382 x 1102 mm Weight: approx kg W x D x H: approx 1972 x 382 x 1288 mm Weight: approx kg W x D x H: approx 1004 x 382 x 1102 mm Weight: approx 8845 kg We would be also pleased to provide you with an offer for your individual van racking system solution 16 17

10 STANDARD FORD BLOCKS TRANSIT CUSTOM BLÖCKE STANDARD BLOCKS VAN RACKING SYSTEMS SUITABLE FOR RENAULT TRAFIC OPEL VIVARO NISSAN PRIMASTAR As of model year 2014, wheel base 3498 mm, normal roof, sliding door on the right side BASIC (DRIVER S SIDE) (PASSENGERS SIDE) PREMIUM (DRIVER S SIDE) (PASSENGERS SIDE) BASIC L I 3 BASIC RE 3 PREMIUM L I 3 PREMIUM RE 3 2 Shelf trays with anti-rattle mat and divider set 3 Standard shelves with lashing strap ProSafe 1 Standard shelf with 7 S-BOXXes 1 Standard shelf with 2 HD cases and 1 half-height S-BOXX 1 Case clamp 1 Shelf tray with anti-rattle mat and divider set 3 Standard shelves with lashing strap ProSafe 1 Long components tray 2 Standard shelves with lashing strap ProSafe 1 Shelf tray with anti-rattle mat and divider set 1 Standard shelf with 7 S-BOXXes 1 Standard shelf with 2 HD cases and 1 half-height S-BOXX 3 Drawers 1 Aluminium drop-down front 1 Case clamp 1 Multi-functional Sortimo panel 1 Medium hose holder 1 Storage pocket 1 Shelf tray with anti-rattle mat and divider set 1 Standard shelf with lashing strap ProSafe 2 Drawers 1 L-BOXX L-BOXX Work bench slide with vice 1 Tool hook set W x D x H: approx 2214 x 395 x 1235 mm Weight: approx kg W x D x H: approx 1246 x 382 x 1256 mm Weight: approx kg W x D x H: approx 2214 x 383 x 1248 mm Weight: approx kg W x D x H: approx 1299 x 382 x 1255 mm Weight: approx 6493 kg We would be also pleased to provide you with an offer for your individual van racking system solution 18 19

11 STANDARD FORD BLOCKS TRANSIT CUSTOM BLÖCKE STANDARD BLOCKS VAN RACKING SYSTEMS SUITABLE FOR MERCEDES-BENZ VITO LONG As of model year 2014, wheel base 3430 mm, normal roof, sliding door on the right side BASIC (DRIVER S SIDE) (PASSENGERS SIDE) PREMIUM (DRIVER S SIDE) (PASSENGERS SIDE) BASIC L I 4 BASIC RE 4 PREMIUM L I 4 PREMIUM RE 4 1 Shelf tray with anti-rattle mat 4 Standard shelves with lashing strap ProSafe 1 Standard shelf with 7 S-BOXXes 1 Standard shelf with 2 L-BOXXes 102 and 1 half-height S-BOXX 1 Case clamp 1 Shelf tray with anti-rattle mat and divider set 2 Standard shelves with lashing strap ProSafe 1 Standard shelf with 2 HD cases 1 Long components tray 1 Standard shelf with 7 S-BOXXes 1 Standard shelf with 6 S-BOXXes 1 Standard shelves with lashing strap ProSafe 2 Drawers 1 Standard shelf with 2 L-BOXXes 136 and 1 S-BOXX 1 Lashing strap ProSafe 1 Multi-functional Sortimo panel 1 Medium hose holder 1 Storage pocket 1 Case clamp 1 Standard shelf with 4 S-BOXXes and 1 wide S-BOXX 1 Standard shelf with 2 HD cases 3 Drawers 1 LT-BOXX 272 on case tray 1 Lashing strap ProSafe 1 Work bench, hinged, with vice W x D x H: approx 2214 x 383 x 1221 mm Weight: approx kg W x D x H: approx 1004 x 383 x 1221 mm Weight: approx kg W x D x H: approx 2214 x 383 x 1214 mm Weight: approx kg W x D x H: approx 1200 x 383 x 1221 mm Weight: approx kg We would be also pleased to provide you with an offer for your individual van racking system solution 20 21

12 STANDARD FORD BLOCKS TRANSIT CUSTOM BLÖCKE STANDARD BLOCKS VAN RACKING SYSTEMS SUITABLE FOR FORD TRANSIT CUSTOM As of model year 2012, wheel base 3300 mm, normal roof, sliding door on the right side BASIC (DRIVER S SIDE) (PASSENGERS SIDE) PREMIUM (DRIVER S SIDE) (PASSENGERS SIDE) BASIC L I 5 BASIC RE 5 PREMIUM L I 5 PREMIUM RE 5 2 Standard shelves with anti-rattle mat 1 Shelf tray with anti-rattle mat and divider set 3 Standard shelves with lashing strap ProSafe 1 Standard shelf with 2 S-BOXXes and 2 wide S-BOXXes 1 Case clamp 1 Shelf tray with anti-rattle mat and divider set 1 Standard shelf with 2 LT-BOXXes Standard shelves with lashing strap ProSafe 1 Long components tray 2 Standard shelves with 6 half-height S-BOXXes each 1 Shelf tray with anti-rattle mat and divider set 1 Standard shelf with 2 S-BOXXes and 2 wide S-BOXXes 1 Standard shelf with lashing strap ProSafe 3 Drawers 1 LT-BOXX 170, 1 L-BOXX Lashing strap ProSafe, 1 Case clamp 1 Multi-functional Sortimo panel 1 Medium hose holder 1 Shelf tray with anti-rattle mat and divider set 1 Standard shelf with 2 LT-BOXXes Standard shelf with 2 HD cases 2 Drawers 1 Lashing strap ProSafe 1 Work bench, hinged, with vice 1 Storage pocket W x D x H: approx 1972 x 382 x 1323 mm Weight: approx kg W x D x H: approx 1004 x 382 x 1323 mm Weight: approx kg W x D x H: approx 1972 x 382 x 1333 mm Weight: approx kg W x D x H: approx 1200 x 382 x 1323 mm Weight: approx kg We would be also pleased to provide you with an offer for your individual van racking system solution 22 23

13 STANDARD FORD BLOCKS TRANSIT CUSTOM BLÖCKE STANDARD BLOCKS VAN RACKING SYSTEMS SUITABLE FOR CITROËN JUMPER FIAT DUCATO PEUGEOT BOXER As of model year 2006, wheel base 3450 mm, medium high roof, sliding door on the right side BASIC (DRIVER S SIDE) (PASSENGERS SIDE) PREMIUM (DRIVER S SIDE) (PASSENGERS SIDE) BASIC L I 6 BASIC RE 6 PREMIUM L I 6 PREMIUM RE 6 3 Shelf trays with anti-rattle mat and divider set 3 Standard shelves with lashing strap ProSafe 1 Standard shelf with 3 L-BOXXes Case clamp 1 Multi-functional Sortimo panel 1 Standard shelf with 3 S-BOXXes and 2 wide S-BOXXes 1 Standard shelf with anti-rattle mat 2 Shelf trays with anti-rattle mat and divider set 1 Standard shelf with 5 S-BOXXes and 2 wide S-BOXXes 1 Long components tray 1 Standard shelf with 7 S-BOXXes and 1 wide S-BOXX 1 Standard shelf with 3 S-BOXXes and 2 wide S-BOXXes 1 Standard shelf with 1 half-height S-BOXX and 2 HD cases 2 Standard shelves with lashing strap ProSafe 1 Shelf tray with anti-rattle mat 3 Drawers 1 T-BOXX 1 LT-BOXX 272 on case tray 1 Aluminium drop-down front, 1 case clamp 1 Multi-functional Sortimo panel, 1 Medium hose holder 1 Gas bottle holder 2 Shelf trays with anti-rattle mat and divider set 1 Standard shelf with 9 half-height S-BOXXes 3 Drawers 2 L-BOXXes L-BOXX Aluminium drop-down front 1 Tool clamp set 1 Tool hook set 1 Work bench, hinged, with vice W x D x H: approx 2698 x 382 x 1613 mm Weight: approx kg W x D x H: approx 1488 x 382 x 1613 mm Weight: approx 4513 kg W x D x H: approx 2698 x 383 x 1637 mm Weight: approx kg W x D x H: approx 1684 x 382 x 1612 mm Weight: approx kg We would be also pleased to provide you with an offer for your individual van racking system solution 24 25

14 STANDARD FORD BLOCKS TRANSIT CUSTOM BLÖCKE STANDARD BLOCKS VAN RACKING SYSTEMS SUITABLE FOR RENAULT MASTER OPEL MOVANO NISSAN NV400 As of model year 2010, wheel base 3682 mm, high roof, sliding door on the right side BASIC (DRIVER S SIDE) (PASSENGERS SIDE) PREMIUM (DRIVER S SIDE) (PASSENGERS SIDE) BASIC L I 7 BASIC RE 7 PREMIUM L I 7 PREMIUM RE 7 6 Shelf trays with anti-rattle mat and divider set 2 Standard shelves with lashing strap ProSafe 1 Standard shelf with 2 L-BOXXes Standard shelf with 3 HD cases 1 Case clamp 1 Multi-functional Sortimo panel 3 Shelf trays with anti-rattle mat 1 Standard shelf with lashing strap ProSafe 1 Standard shelf with 2 L-BOXXes 102 and 1 half-height S-BOXX 1 Lashing strap ProSafe 4 Shelf trays with anti-rattle mat and divider set 1 Standard shelf with lashing strap ProSafe 2 Standard shelves with 5 S-BOXXes and 2 wide S-BOXXes, each 1 Standard shelf with 4 S-BOXXes and 1 wide S-BOXX 1 Standard shelf with 3 HD cases 3 Drawers 1 Shelf tray with anti-rattle mat 1 Small components case 342 E on case tray 1 L-BOXX 136, 1 aluminium drop-down front, 1 case clamp 1 Multi-functional Sortimo panel, 1 Medium hose holder 1 Gas bottle holder 1 Shelf tray with anti-rattle 1 Standard shelf with 5 S-BOXXes and 1 wide S-BOXX 1 Standard shelf with 2 L-BOXXes 136 and 1 S-BOXX 1 Standard shelf with 2 M-BOXXes and 1 S-BOXX 3 Drawers 1 T-BOXX 1 L-BOXX L-BOXX 136 on case tray 1 Aluminium drop-down front 1 Tool clamp set 1 Work bench, hinged, with vice 1 Storage pocket W x D x H: approx 2456 x 383 x 1816 mm Weight: approx kg W x D x H: approx 1246 x 382 x 1816 mm Weight: approx kg W x D x H: approx 2456 x 383 x 1816 mm Weight: approx kg W x D x H: approx 1442 x 386 x 1816 mm Weight: approx kg We would be also pleased to provide you with an offer for your individual van racking system solution 26 27

15 STANDARD FORD BLOCKS TRANSIT CUSTOM BLÖCKE STANDARD BLOCKS VAN RACKING SYSTEMS SUITABLE FOR MERCEDES-BENZ SPRINTER VOLKSWAGEN CRAFTER As of model year 2006, wheel base 3665 mm, medium high roof, sliding door on the right side BASIC (DRIVER S SIDE) (PASSENGERS SIDE) PREMIUM (DRIVER S SIDE) (PASSENGERS SIDE) BASIC L I 8 BASIC RE 8 PREMIUM L I 8 PREMIUM RE 8 1 Long components tray 2 Shelf trays with anti-rattle mat and divider set 3 Standard shelves with lashing strap ProSafe 1 Standard shelf with 5 S-BOXXes and 2 wide S-BOXXes 1 Case clamp 2 Shelf trays with anti-rattle mat 2 Shelf trays with anti-rattle mat and divider set 1 Standard shelf with 3 HD cases 1 Long components tray 1 Standard shelf with lashing strap ProSafe 2 Shelf trays with anti-rattle mat and divider set 2 Standard shelves with 5 S-BOXXes and 2 wide S-BOXXes 1 Standard shelf with 7 S-BOXXes and 1 wide S-BOXX 3 Drawers, 1 LT-BOXX 272 on case tray 1 Standard shelf with 3 L-BOXXes Standard shelf with 3 L-BOXXes Standard shelf with 3 L-BOXXes Aluminium drop-down front, 1 case clamp 1 Multi-functional Sortimo panel, 1 medium hose holder 1 Gas bottle holder 1 Shelf tray with anti-rattle mat and divider set 1 Standard shelf with 5 S-BOXXes and 2 wide S-BOXXes 7 Drawers 1 LT-BOXX 272 on case tray 1 Standard shelf with lashing strap ProSafe 1 Aluminium drop-down front 1 Work bench, hinged, with vice W x D x H: approx 2940 x 382 x 1742 mm Weight: approx 8508 kg W x D x H: approx 1488 x 382 x 1731 mm Weight: approx kg W x D x H: approx 2940 x 383 x 1742 mm Weight: approx kg W x D x H: approx 1680 x 382 x 1731 mm Weight: approx kg We would be also pleased to provide you with an offer for your individual van racking system solution 28 29

16 SOBOGRIP PROSAFE FLOOR SOBOGRIP PROSAFE FLOOR SOBOGRIP PROSAFE FLOOR Model year Wheel base Version Reference No Citroën Jumpy / mm Fiat Scudo / mm Peugeot Expert SAFE, TIME-SAVING AND SIMPLE! The SoboGrip ProSafe Floor is an innovative and professional load securing concept, by which Sortimo enables an absolutely flexible lashing of payload on the floor That way you can secure your material loaded faster, more variably and more efficiently than ever before In addition, the SoboGrip ProSafe Floor is compatible to all ProSafe applications, such as for example straps or restraint poles, and enables a fast and simple assembly of the Sortimo van racking systems by means of pre-configured connection points The SoboGrip ProSafe Floor combines highest safety standards, variable applicability and optimal efficiency for your daily routine! PROSAFE universal safety assembly floor including load securing elements lightweight screen process panel 9 mm with anti-slip effect aluminium door sill protection lashing cups for the original lashing points of the vehicle integrated ProSafe lashing eyes for 200 dan perfect assembly floor for Sortimo HD and Globelyst system Volkswagen T mm mm Nissan Primastar / mm Tailgate Opel Vivaro / mm Swing door Renault Trafic mm Swing door mm Tailgate Mercedes-Benz Vito long mm L2 H Ford Transit Custom mm H1/H Front-wheel drive mm H1/H Citroën Jumper / mm Fiat Ducato / mm Peugeot Boxer mm mm Overhang Nissan NV40 / mm H1/H Opel Movano / mm H2/H Renault Master mm H2/H Front-wheel drive Mercedes-Benz Sprinter mm Volkswagen Crafter mm mm mm Overhang All listed floor plates are intended for vehicles with a sliding door on the right side Sliding door on the left side upon request UNIQUE! The Sortimo ProSafe straps are the only load securing system that can be hooked-in at the original lashing points of the vehicle 30 31

17 SIDE CLADDING SOWAFLEX SIDE CLADDING SOWAFLEX SoWaFlex THE OPTIMAL PROTECTION FOR YOUR VAN! The wall cladding SoWaFlex made of lightweight honeycomb material protects your loading space and at the same time weighs 60 percent lass than comparable wooden cladding The surface is moisture and chemical-resistant as well as extremely impact-resistant and scratch-proof The cladding is cut to perfectly fit every type of vehicle Choices of wall cladding Model year Wheel base Version Wall cladding Reference No Citroën Jumpy / as of mm H1 Side cladding 2/4/ Fiat Scudo as of mm H1 Side cladding 1/3/ Peugeot Expert as of 2007 all H1/H2 Sliding door bottom as of 2007 all H1/H2 Sliding door top as of 2007 all H1/H2 Swing door bottom 13/ as of 2007 all H1/H2 Swing door top 14/ as of mm H1 Side cladding 2/4/ as of mm H1 Side cladding 1/3/ Volkswagen T5 as of mm Side cladding 2/4/ as of mm Side cladding as of mm Side cladding 2/4/ as of mm Side cladding as of /3400 mm Sliding door bottom as of /3400 mm Sliding door top as of /3400 mm Swing door bottom 13/ as of /3400 mm Swing door top 14/ as of /3400 mm Tailgate bottom as of /3400 mm Tailgate top Nissan Primastar / as of mm H1/H2 Side cladding Opel Vivaro / as of mm H1/H2 Side cladding Renault Trafic as of /3498 mm H1/H2 Sliding door top as of /3498 mm H1 Swing door top 14/ as of /3498 mm H3 Swing door top 14/ as of /3498 mm H1 Tailgate top Model year Wheel base Version Wall cladding Reference No Mercedes-Benz Vito long mm L1 H1 Side cladding (1-6) mm L2 H1 Side cladding (1-6) mm H1 Side cladding (1-6) all Sliding door bottom (9) all Sliding door top (10) all H1/H3 Swing door bottom (13/15) all H1 Swing door top (14/16) all H3 Swing door top (14/16) compact/long mm H1/H3 Tailgate bottom (17) compact/long mm H1/H3 Tailgate top (18) Ford Transit Custom mm Side cladding (1,3,5) mm Side cladding (2,4,6) /3300 mm Sliding door bottom (9) /3300 mm Sliding door top (10) /3300 mm Swing door bottom (13/15) /3300 mm Swing door top (14/16) mm Side cladding (1,3,5) mm Side cladding (2,4,6) /3300 mm Tailgate bottom (17) /3300 mm Tailgate top (18) Citroën Jumper / mm H1 Side cladding Fiat Ducato / mm H2 Side cladding Peugeot Boxer mm H1 Side cladding mm H2 Side cladding mm H1/H2 Sliding door bottom /4035 mm H1/H2 Sliding door bottom mm H1/H2 Sliding door top /4035 mm H1/H2 Sliding door top /3450/4035 mm H1/H2 Swing door bottom 13/ mm H2 Side cladding /3450/4035 mm H1/H2 Swing door top 14/ mm Overhang H2 Side cladding Nissan NV mm H1 Side cladding Opel Movano mm H2 Side cladding Renault Master mm H1 Side cladding Front-wheel drive mm H2/H3 Side cladding /3682 mm H1/H2/H3 Swing door top 14/ /3682 mm H1/H2/H3 Swing door bottom mm H1/H2 Sliding door bottom mm H1/H2 Sliding door top mm H2/H3 Sliding door bottom Mercedes-Benz Sprinter mm Side cladding Volkswagen Crafter mm Side cladding mm Sliding door bottom mm Sliding door top mm Sliding door bottom mm Sliding door top /3665 mm Swing door bottom 13/ /3665 mm Swing door top 14/ mm L1 Side cladding mm L2 Side cladding All listed floor plates are intended for vehicles with a sliding door on the right side Sliding door on the left side upon request All listed floor plates are intended for vehicles with a sliding door on the right side Sliding door on the left side upon request 32 33

18 SIDE CLADDING SOWAAPP SIDE CLADDING SOWAAPP SoWaAPP THE MULTI-FUNCTIONAL PROTECTION FOR YOUR VEHICLE! Model year Wheel base Roof Wall cladding Reference No The new SoWaApp wall cladding not only protects your vehicle against scratches or damages, it in addition enables a simple fastening of hooks and extensive accessories for the storing of tools The moisture-resistant and robust wall cladding is cut to custom-fit your vehicle and serves as a system cladding eg above work benches The clever Sortimo system perforation enables the fastening of extensive accessories such as hooks, hose holders, storage pockets, i-boxx holders, tool hooks and many more loading area protection aluminium 1 mm possible direct fastening of accessories with optional strengthening set fast installation by means of preset fastening boreholes moisture-resistant and robust cut accurately to fit your vehicle exactly ideal as a system cladding eg above work benches Volkswagen T mm H1 Side cladding (1-6) mm H1 Side cladding (1-6) /3400 mm H1 Swing door top (14/16) /3400 mm H1 Swing door bottom (13/15) Mercedes-Benz Vito long mm L1 H1 Side cladding (1-6) mm L2 H1 Side cladding (1-6) mm H1 Side cladding (1-6) all H1 Swing door top (14/16) all H1 Swing door bottom (13/15) Ford Custom L mm H1 Side cladding (1-6) Ford Custom L mm H1 Side cladding (1-6) Ford Custom L1/L /3300 mm H1 Swing door bottom (13/15) /3300 mm H1 Swing door top (14/16) Citroën Jumper / mm H1 Side cladding (1-6) Fiat Ducato / mm H2 Side cladding (1-6) Peugeot Boxer mm H1 Side cladding (1-6) mm H2 Side cladding (1-6) mm H2 Side cladding (1-6) /3450 mm H1 Swing door top (14/16) all H2 Swing door top (14/16) all H1/H2 Swing door bottom (13/15) Nissan NV40 / Front-wheel drive mm H1 Side cladding (1-6) Opel Movano Front-wheel drive mm H2 Side cladding (1-6) Renault Master Front-wheel drive mm H2/H3 Side cladding (1-6) Front-wheel drive mm H2/H3 Side cladding (1-6) all H1/H2 Swing door top (14/16) all H2/H3 Swing door top (14/16) all H1/H2/H3 Swing door bottom (13/15) Mercedes-Benz Sprinter mm H1/H2 Side cladding (1-6) Volkswagen Crafter mm H1/H2/H3 Side cladding (1-6) /3665 mm H1/H2 Swing door top (14/16) /3665 mm H1/H2 Swing door bottom (13/15) All listed floor plates are intended for vehicles with a sliding door on the right side Sliding door on the left side upon request 34 35

19 CONSTRUCTION SITE CONTAINERS CONSTRUCTION SITE CONTAINERS RACKING SYSTEM SUITABLE FOR CONSTRUCTION SITE CONTAINERS 20 ft CONSTRUCTION SITE CONTAINERS SITE CONTAINER ALSO SUITED FOR YOUR WORKSHOP AND YOUR WAREHOUSE! SORTIMO HD THE SUITABLE EQUIPMENT FOR YOUR CONTAINER AS WELL! ohne Dekoration CONTAINER SIDE 1 CONTAINER SIDE 2 CONTAINER SIDE 1 Long components tray 2 Shelf trays with anti-rattle mat and divider set 3 Shelf trays with anti-rattle mat 1 Standard shelf with lashing strap ProSafe 2 Standard shelves with 4 S-BOXXes and 1 wide S-BOXX 2 Standard shelves, 2 standard shelves with lashing strap ProSafe 6 Drawers 1 Standard shelf with L-BOXX Shelf trays with anti-rattle mat and divider set 2 L-BOXXes Standard shelves with L-BOXX Base plinths, 1 lashing strap ProSafe 1 Aluminium drop-down front 4 HD cases 1 Work top 3 Shelf trays with anti-rattle mat and divider set 1 Standard shelf 1 Perforated aluminium panel 1 Standard shelf with 6 half-height S-BOXXes 3 Small components cases on case tray 1 Standard shelf with 2 LT-BOXXes Standard shelf with 2 S-BOXXes and 2 wide S-BOXXes 1 Lashing strap ProSafe 1 Standard shelf with 2 HD cases 1 Medium hose holder 2 Drawers 1 Multi-functional Sortimo panel 1 Plastic storage pocket for paper 1 Tool hook set, 1 tool clamp set 1 Terminal tool strip 1 Hook strip 1 Case clamp 1 Aerosol can holder 1 Big storage pocket 1 Aerosol can holder 1 Workbench, hinged, with vice 2 Lashing rails ProSafe 1 Floor lashing rail + perforated aluminium pane Sortimo HD provides for order and clarity in your container you have all tools and materials directly on site just position your container and get started W x D x H: approx 1971 x 382 x 1700 mm Weight: approx kg W x D x H: approx 1488 x 382 x 1800 mm Weight: approx kg W x D x H: approx 4104 x 486 x 1800 mm Weight: approx kg We would be also pleased to provide you with an offer for your individual van racking system solution 36 37

20 ACCESSORIES ACCESSORIES ACCESSORIES FOR SORTIMO HD FOR SORTIMO HD WE HAVE DEVELOPED SPECIFIC ACCESSORIES THAT SATISFY YOUR DEMANDS! DIVIDERS Name Matchcode Reference No Divider shelf tray HD 03-0 Divider shelf tray HD 04-0 Divider shelf tray HD Compo 05-0 Divider standard shelf HD 03-0 Divider standard shelf HD Composite 04-0 Divider standard shelf HD 05-0 TB FW HD TB FW HD TB FW HD TB FB HD TB FB HD TB FB HD ANGLE GRINDER HOLDER Designed to fixate two-hand and one-hand angle grinders The angle grinder holder may be mounted universally Thanks to the recesses the angle grinder keeps in position safely and does not shift The cable may be hooked into the integrated holding lugs HEAVY DUTY HANGER Perfectly suited for fixing heavy hoses, chains, cables, slings or similar items Every hanger is resilient up to 30 kg The heavy duty hangers are available in the depths 200 mm and 300 mm and are assembled by means of STS cross bar profiles at the vehicle partition wall The hangers may also be assembled at the side in the vehicle or on the van racking system HEAVY DUTY HANGER 200 SLB 200 Ref-No Dimensions: 300 x 203 x 97 mm Weight: 108 kg PIPE WRENCH HOLDER Developed for the fixation of heavy pipe wrenches The pipe wrench holder may be mounted universally The holder provides clarity in the vehicle Through the extra long hook, the pipe wrench does not fall from the holder even during drives in difficult terrain ANGLE GRINDER HOLDER 03-6 WSH 03-6 Ref-No Dimensions: 253 x 42 x 92 mm Weight: 048 kg ANGLE GRINDER HOLDER 04-6 WSH 04-6 Ref-No Dimensions: 357 x 42 x 92 mm Weight: 060 kg ANGLE GRINDER HOLDER 05-6 WSH 05-6 Ref-No Dimensions: 461 x 42 x 92 mm Weight: 071 kg HEAVY DUTY HANGER 300 SLB 300 Ref-No Dimensions: 300 x 303 x 97 mm Weight: 130 kg PIPE WRENCH HOLDER RZH Ref-No Dimensions: 50 x 497 x 55 mm Weight: 090 kg 38 39

21 ACCESSORIES ACCESSORIES ACCESSORIES FOR SORTIMO HD PROSAFE Sortimo load securing system HOSE HOLDER METAL installation on the side panel of the van racking system space-saving storing of hoses and cables hoses are quickly ready to hand FOR SORTIMO HD WE HAVE DEVELOPED SPECIFIC ACCESSORIES THAT SATISFY YOUR DEMANDS! PARALLEL VICE 140 ZSP 140 Ref-No Weight: 16 kg HEAVY DUTY HOOK STRIP ideal to safely store away cables, hoses, jackets and many more resilient up to 12 kg assembly at the block side integrated in the upright, in the frame and in the lashing rails as part of a serial production no additional assembly of lashing rails necessary you and your load are safely on the road you protect your material you save time, weight and money PROSAFE LASHING STRAP WITH CLAMP BUCKLE AND PROSAFE HOOK PSH KS 1,4 Ref-No Strap length approx 14 m PSH KS 3 Ref-No Strap length approx 3 m LASHING STRAP WITH RATCHET TURN BUCKLE AND PROSAFE HOOK PSH RA 3,5 Ref-No Strap length approx 35 m PSH RA 6 Ref-No Strap length approx 60 m PSH KS 6 Ref-No Strap length approx 6 m HEAVY DUTY WORK BENCH heavy duty work bench, hinged with high console, without vice SMALL HOSE HOLDER ZSHK Ref-No Dimensions: 188 x 70 x 147 mm MEDIUM HOSE HOLDER ZSHM Ref-No Dimensions: 266 x 108 x 201 mm LARGE HOSE HOLDER ZSHG Ref-No Dimensions: 348 x 144 x 257 mm height from the floor up to the assembly floor of the vehicle: mm for vehicles with low trunk sill HEAVY DUTY WORK BENCH HINGED WB SKL Ref-No Work top dimensions (WxDxH): 280 x 1000 x 36 mm HOOK STRIP 03 ZHL 03 Ref-No Dimensions: 251 x 80 x 51 mm HOOK STRIP 04 ZHL 04 Ref-No Dimensions: 355 x 80 x 51 mm HOOK STRIP 05 ZHL 05 Ref-No Dimensions: 459 x 80 x 51 mm LASHING STRAP PROSAFE FOR GAS BOTTLES PSH GA Ref-No Strap length approx 930 mm LASHING STRAP PROSAFE FOR PROPANE GAS BOTTLES PSH PGA Ref-No Strap length approx 770 mm BUNGEE STRAP PROSAFE 1000 MM + 2 HOOKS SGPS 1000 Ref-No

22 MOBILE ASSORTMENTS MOBILE ASSORTMENTS THE SORTIMO HD WORLD OF BOXXES THE SORTIMO WORLD OF BOXXES SUITABLE FOR YOUR SORTIMO HD SYSTEM IS NOW ALSO AVAILABLE IN SORTIMO BLACK Sortimo HD offers you a wide selection of BOXXes for your tools and working equipment METAL CASE PAGE 44 S-BOXX PAGE 46 LT-BOXX PAGE 51 i-boxx PAGE 52 The legendary metal case by Sortimo Since the market launch of the first metal case in 1973 we have continuously developed this classic further The S-BOXX is a centrepiece for every well organised, mobile workshop The sliding box is made of stable, lightweight plastic and can be pushed into a Sortimo shelf with just one hand Small components are thus clearly arranged in the van racking system The LT-BOXX facilitates the transport of bulky devices from the vehicle to the construction site It is an open L-BOXX with a handle which swivels well out for easy loading and removing With it you can assort materials quickly and transport them conveniently together with the remaining tools The i-boxx makes it possible to arrange small components exactly as required and to specifically access screws, rawlplugs and other consumables Without losing unnecessary time you can see what is missing at any time! i-boxx RACK PAGE 53 T-BOXX PAGE 48 The T-BOXX is light, robust and extremely well-arranged thanks to its transparent cover With its almost infinite combinability of the inset boxes it offers the appropriate equipping solution for everything M-BOXX PAGE 48 Robust and with drawer function - the M-BOXX of Sortimo Perfectly suited to transport your tools and your consumables in a safe and space-saving way The M-BOXX is of course also further divisible by means of dividers and is resistant to oil, petrol and many chemicals HD CASE PAGE 52 The new Sortimo HD case has been designed for the tough operations in daily use The HD case is exceedingly resilient, stain-resistant as well as extremely lightweight and in addition universally applicable for tools and small components The i-boxx Rack is a mobile shelf stackable at will for sliding in i-boxxes and LS drawers and offers maximum combination possibilities The rack has been designed for the storage and transport of small components in connection with the i-boxx Thanks to the LS drawer, larger equipment may additionally be stored without any difficulty L-BOXX PAGE 49 Thanks to its click connection, the L-BOXX family enables the convenient transport of several BOXXes and offers robust protection for your tools and accessories LS-BOXX PAGE 50 Optimally suited for the transport of electrical power tools and small components at the same time The LS-BOXX combines a L-BOXX 136 with removable i-boxxes or drawers Persuade yourself of the unlimited design variations of your BOXXes in our Mobile Assortments Catalogue You can request this quite simply by filling out the form on page 61 or by scanning the barcodes:

23 METAL CASE METAL CASE MOBILE ASSORTMENTS METAL CASE CONVENIENT HANDLING 120 STOP ANGLE OF THE COVER FREE ARRANGEMENT WITH INSET BOXES OR DIVIDERS THE PROVEN SORTIMO CLASSIC PLEASE FIND THE COMPLETE SELECTION OF METAL CASES IN THE CATALOGUE MOBILE ASSORTMENTS SMALL COMPONENTS CASE 320 KM 320 Ref-No Dimensions: 440 x 330 x 66 mm Weight: 26 kg Sortimo small components case without Inset boxes SMALL COMPONENTS CASE 332 E 3/4 KM 332 E 3/4 Ref-No Dimensions: 440 x 330 x 100 mm Weight: 48 kg Equipping bottom: 6 x B3 yellow, 3 x C3 blue, 2 x D3 green, slot divider 93 x 309 Equipping top: BES 31 3/4 12 x A4 red, 6 x B4 yellow, 3 x C4 blue DUOMAGAZIN 332 E 1/1 DM 332 E 1/1 Ref-No Dimensions: 440 x 330 x 100 mm Weight: 48 kg Equipping bottom: Divider insert Equipping top: BES 31 1/1 with Inset boxes 18 x A4 red, 9 x B4 yellow, 3 x C4 blue TOOL CASE 321 WM 321 Ref-No Dimensions: 440 x 330 x 66 mm Weight: 30 kg Sortimo tool case including divider set NOZZLE CASE DK 321 Ref-No Dimensions: 440 x 330 x 66 mm Weight: 31 kg Sortimo nozzle case for 165 nozzles ø 22 mm with foam insert 44 45

24 S-BOXX S-BOXX MOBILE ASSORTMENTS S-BOXX TRANSPARENT FRONT DRAWER FUNCTION OPTIONAL: PARTITIONING BY MEANS OF DIVIDERS ARRANGEMENT OF SMALL PARTS S-BOXX WITH CLEAR PLASTIC WINDOW 04-5 BLACK SB SF 04-5 HD S-BOXX WITH CLEAR PLASTIC WINDOW 04-9 BLACK SB SF 04-9 HD Ref-No Dimensions: 145 x 351 x 78 mm Weight: 032 kg Ref-No Dimensions: 147 x 351 x 153 mm Weight: 051 kg Depth 4, half-height Depth 4 S-BOXX WITH CLEAR PLASTIC WINDOW 03-8 BLACK SB SF 03-8 HD Ref-No Dimensions: 146 x 247 x 136 mm Weight: 035 kg Depth 3 DIVIDERS FOR S-BOXXES Dividers Reference No Half-height S-BOXX depth S-BOXX depth S-BOXX depth S-BOXX depth WIDE S-BOXX WITH CLEAR PLASTIC WINDOW 03-8 BLACK SBB SF 03-8 HD Ref-No Dimensions: 299 x 247 x 136 mm Weight: 056 kg Depth 3, wide WIDE S-BOXX WITH CLEAR PLASTIC WINDOW BLACK SBB SF HD Ref-No Dimensions: 300 x 456 x 187 mm Weight: 1071 kg Depth 5, wide Wide S-BOXX depth S-BOXX WITH CLEAR PLASTIC WINDOW BLACK SB SF HD Wide S-BOXX depth Wide S-BOXX depth WIDE S-BOXX WITH CLEAR PLASTIC WINDOW 04-9 BLACK SBB SF 04-9 HD Ref-No Dimensions: 148 x 456 x 187 mm Weight: 074 kg Ref-No Dimensions: 299 x 351 x 153 mm Weight: 0778 kg Depth 5 Depth 4, wide 46 47

25 T-BOXX, M-BOXX L-BOXX MOBILE ASSORTMENTS T-BOXX TRANSPARENT COVER ALMOST INFINITE COMBINATION POSSIBILITIES OF THE INSET BOXES LARGE OPENING ANGLE L-BOXX SIMPLE CLICK CONNECTION VARYING DIVIDING POSSIBILITIES ROBUST PROTECTION FOR TOOLS AND CONSUMABLES STORING OF SMALL PARTS L-BOXX PARTNER APPs T-BOXX BLACK EMPTY STB 320 HD Ref-No Dimensions: 440 x 350 x 80 mm Weight: 159 kg T-BOXX BLACK H STANDARD STB 321 HD H Ref-No Dimensions: 440 x 350 x 80 mm Weight: 23 kg CLICKABLE The L-BOXX is being used as an outer packaging for tools and consumables by well-known manufacturers such as BOSCH, FÖRCH, GEDORE and many more Maybe you already have one of our partner L-BOXXes in your inventory that you can integrate into your Sortimo HD equipment M-BOXX STURDY BOXX DRAWER FUNCTION EXCELLENT VALUE FOR MONEY L-BOXX 102 BLACK LB 102 HD B LB 102 H Ref-No Dimensions: 442 x 357 x 117 mm Weight: 20 kg M-BOXX 24-9 BLACK MB 24-9 HD Ref-No Dimensions: 445 x 340 x 153 mm Weight: 105 kg PLEASE FIND THE COMPLETE SELECTION OF BOXXES IN THE MOBILE ASSORTMENTS CATALOGUE L-BOXX 136 BLACK LB 136 HD Ref-No Dimensions: 442 x 357 x 151 mm Weight: 250 kg PLEASE FIND THE COMPLETE SELECTION OF SUBDIVISIONAL POSSIBILITIES FOR THE L-BOXX IN THE MOBILE ASSORTMENTS CATALOGUE M-BOXX INCLUDING HANDLE BLACK MB 24-9 G HD Ref-No Dimensions: 445 x 340 x 153 mm Weight: 132 kg M-BOXX WITH LID AND HANDLE BLACK MB 24-9 DG HD Ref-No Dimensions: 445 x 340 x 155 mm Weight: 18 kg L-BOXX 238 BLACK LB 238 HD Ref-No Dimensions: 442 x 357 x 253 mm Weight: 30 kg L-BOXX 374 BLACK LB 374 HD Ref-No Dimensions: 442 x 357 x 389 mm Weight: 35 kg 48 49

26 LS-BOXX LT-BOXX MOBILE ASSORTMENTS LS-BOXX SIMPLE CLICK CONNECTION DRAWER FUNCTION OPTIONALLY EQUIPABLE WITH i-boxxes OR DRAWERS CAN BE COMBINED WITH THE COMPLETE L-BOXXES FAMILY LT-BOXX SIMPLE LOADING AND REMOVING OF TOOLS AND CONSUMABLES LARGE OPENING AND SWIVELLING OUT HANDLES PLEASE FIND THE COMPLETE SELECTION OF BOXXES IN THE MOBILE ASSORTMENTS CATALOGUE SIMPLE CLICK CONNECTION LS-BOXX 306 EMPTY BLACK LS 306 HD LS DRAWER 72 BLACK LS-S 72 HD COMBINABLE WITH THE ENTIRE L-BOXXES FAMILY Ref-No Dimensions: 442 x 357 x 321 mm Weight: 275 kg Ref-No Dimensions: 370 x 314 x 72 mm Weight: 0528 kg PLEASE FIND THE COMPLETE SELECTION OF BOXXES IN THE MOBILE ASSORTMENTS CATALOGUE LS DRAWER 92 BLACK LS-S 92 HD Ref-No Dimensions: 367 x 316 x 92 mm Weight: 0604 kg EQUIPPING VARIATIONS LS-BOXX i-boxxes 72 LS-BOXX i-boxx 72 + drawer 72 LS-BOXX i-boxx 53 + drawer 92 LS-BOXX drawers 72 LS-BOXX i-boxx 53 + i-boxx 72 i-boxx 53 BLACK EMPTY I-53 HD Ref-No Dimensions: 367 x 316 x 53 mm Weight: 081 kg LT-BOXX 136 BLACK LT 136 HD Ref-No Dimensions: 442 x 362 x 152 mm Weight: 21 kg LT-BOXX 170 BLACK LT 170 HD Ref-No Dimensions: 442 x 361 x 186 mm Weight: 23 kg i-boxx 72 BLACK EMPTY I-72 HD Ref-No Dimensions: 367 x 316 x 72 mm Weight: 088 kg LT-BOXX 272 BLACK LT 272 HD Ref-No Dimensions: 442 x 361 x 288 mm Weight: 29 kg LT-BOXX 408 BLACK LT 408 HD Ref-No Dimensions: 442 x 362 x 424 mm Weight: 34 kg 50 51

27 I-BOXX, HD CASE i-boxx RACK MOBILE ASSORTMENTS i-boxx TRANSPARENT COVER EXTREMELY LIGHTWEIGHT BRINGING ORDER TO SMALL COMPONENTS i-boxx 53 BLACK EMPTY I-53 HD Ref-No Dimensions: 367 x 316 x 53 mm Weight: 081 kg PLEASE FIND THE COMPLETE SELECTION OF INSET BOXES TO EQUIP THE I-BOXX IN THE MOBILE ASSORTMENTS CATALOGUE i-boxx 72 BLACK EMPTY I-72 HD Ref-No Dimensions: 367 x 316 x 72 mm Weight: 088 kg i-boxx Rack MODULES FOR THE CARRYING OF i-boxxes AND DRAWERS DETACHABLE CLICK CONNECTION (ACTIVE RACK) OR FIXED CONNECTION (INACTIVE RACK) HD CASE EXTREMELY RESILIENT STAIN-RESILIENT VERY LIGHTWEIGHT i-boxx RACK TOP COVER 34 BLACK I-RACK D 34 HD Ref-No Dimensions: 442 x 341 x 56 mm Weight: 088 kg The i-boxx rack top cover with handle closes off the topmost rack to the top HD CASE EMPTY HDK 320 Ref-No Dimensions: 442 x 345 x 88 mm Weight: 17 kg i-boxx RACK ACTIVE 85 BLACK I-RACK A 85 HD Ref-No Dimensions: 442 x 342 x 100 mm Weight: 095 kg The active rack can be easily connected and separated again to other racks, L-BOXXes or LS-BOXXes i-boxx RACK INACTIVE 85 BLACK I-RACK I 85 HD Ref-No Dimensions: 442 x 342 x 100 mm Weight: 098 kg The inactive i-boxx rack is suited if a closed shelf block, which cannot be separated anymore, shall be built out of several racks HD CASE H STANDARD HDK 321 H Ref-No Dimensions: 442 x 345 x 88 mm Weight: 23 kg Sortimo HD case equipped with Inset boxes PLEASE FIND THE COMPLETE SELECTION OF BOXXES IN THE MOBILE ASSORTMENTS CATALOGUE 52 53

28 MOBILE ASSORTMENTS ORIGINAL ACCESSORIES MOBILE ASSORTMENTS THE PERFECT EXTENSION TO SORTIMO HD! ORIGINAL ACCESSORIES THE PERFECT EXPANSION TO YOUR VAN RACKING SYSTEM! Sortimo s original accessories give you the possibility to design your van racking system entirely according to your needs Our Mobile Assortments Catalogue offers you even more BOXXes, cases and further clever ideas for your tools, accessories and your consumables Please order your catalogue with the form on page 61 or scan the QR code: Whether individual divisions for drawers or trays, lashing rails, hook sets or also the Sortimo TopSystem extend your equipment the way you want! Please order our Original Accessories Catalogue with the form on page 61 or scan the QR code: wwwsortimocom/catalogues wwwsortimocom/catalogues 54 55

29 WHO IS BEHIND SORTIMO HD? SORTIMO SORTIMO ONLINE WHO IS BEHIND SORTIMO HD? VISIT US ONLINE Sortimo HD is a solution for the roughest application purposes The challenge to develop a van racking system exactly for this sector and to be the first to introduce it to the market, was extremely tempting for us Attention: Developed only for hard guys and of course tough girls ;-) FRANZ STEGHERR PRODUCT MANAGER Sortimo HD is an extremely robust van racking system that smoothly integrates into the Sortimo System Sortimo HD is a strong and intelligent solution, which combines the approved Sortimo quality with the new composite technology for the craftsman THOMAS KRATSCHMANN HEAD OF QUALITY MANAGEMENT As market leader we offer a wide variety of services, information and interactive quotations for all kinds of needs surrounding van racking systems naturally online too wwwsortimocom/sortimo HD On our Website you can find further information regarding our products mentioned in the brochure Visit our Website and keep yourself informed! I am proud that we have developed Sortimo HD, because with it our users have a highly stressable product at their disposal This system makes full use of the synergy effects between Sortimo s approved Globelyst system and the combined fibre-reinforced composites innovatively used by Sortimo There has never been such a stable, highly robust and almost indestructible product in Sortimo s history LUDWIG STREHLE HEAD OF CONSTRUCTION ENGINEERING The extremely high stability and flexibility of the Sortimo HD system equipment is also reflected in the visual appearance: clear design, unambiguous and fast recognition of the features, the striking colouring as well as the powerful layout of the lines give this product line a distinctive overall appearance FRANK ZOZIN HEAD OF DESIGN 56 57

30 SORTIMO CONTACT SORTIMO INTERNATIONAL SORTIMO CONTACT AT YOUR SERVICE WORLDWIDE SORTIMO INTERNATIONAL SORTIMO INTERNATIONAL GmbH HEADQUARTERS Dreilindenstraße Zusmarshausen Tel Fax info@sortimocom wwwsortimocom ARGENTINA Adolfo E Seifer Sortimo Liaison Office South America Francia 2545 AR San Isidro Tel Fax seiferar@arnetcomar wwwsortimocom AUSTRALIA Berreny Pty Ltd PO Box 145 AU Ryde, NSW Tel info@sortimocomau wwwsortimocomau AUSTRIA Sortimo GesmbH Technologiezentrum Linz Wiener Straße 131, Eingang A A Linz Tel Fax office@sortimoat wwwsortimoat BELGIUM Sortimo BELUX bvba Schaarbeeklei 491 B Vilvoorde Tel Fax info@sortimobe wwwsortimobe CAYMAN ISLANDS W S M Wacker Service Mobil Ltd POBox 823 KY Grand Cayman Islands Tel sunnycayman@hotmailcom wwwsortimocom CZECH REPUBLIC FD servis Praha sro Kuří 26 CZ Rícany u Prahy Tel Fax info@fdservisprahacz wwwfdservisprahacz TOP CENTRUM Jaroslav Novák Rohovládova Bělá 91 CZ Rohovládova Bělá Tel Fax topcentrum@topcentrumcz wwwtopcentrumcz DENMARK Sortimo A/S Greve Main 24 DK Greve Tel Fax info@sortimodk wwwsortimodk FINLAND Suomen Autokaluste Oy Kaapelikatu Hyvinkää Tel info@sortimofi wwwsortimofi FRANCE Sortimo SARL Aéropark 1 Rue Jean Mermoz Bât C6 F Gonesse Tel Fax info@sortimofr wwwsortimofr GULF COOPERATION COUNCIL H&H Euro Tech Co WLL Building 417, Road 41 Al Shabab Ave, Block 340 Juffair, Manama Kingdom of Bahrain Tel Fax info@sortimo-gcccom wwwhh-euroteccom wwwsortimo-gcccom GREECE Stathis Transport Refrigeration Dounas Theocharis & Co SA Sindos Industrial Area, Entrance B PO Box GR Thessaloniki Tel Fax contact@stathiscomgr wwwstathiscomgr UK AND IRELAND Sortimo International Ltd Ravenhurst Court Birchwood, Warrington, Cheshire GB - WA3 6PN FREEPHONE: Tel Fax info@sortimocouk wwwsortimocouk ICELAND RAFVER EHF Skeifan 3 E-F PO Box ISL Reykjavik Tel Fax rafver@rafveris wwwrafveris HUNGARY Hofmann Garázsipari Kft Budaörsi út 11 H Budakeszi Tel Fax ertekesites@ballunhu wwwballunhu Pappas Auto Magyarország Kft Hunyadi János út 6 H Budapest Tel Fax info@pappashu wwwpappashu ISRAEL Sortline Ltd 17 Zvi Bergman St Industrial Zone Sgula IL Petach-Tikva Tel Fax info@sortlinecoil wwwsortlinecoil ITALY TIT EUROPE SRL Via Luigi Corradi, 16 I TERNI (TR) Tel Fax commerciale@titeuropecom wwwsortimoit TIT Europe Via Lussemburgo, Villafranca di Verona ( VR ) Green number: wwwsortimoit JAPAN MURATEC - KDS CORPORATION No 39, Matsuda-cho Higashi-Kujo, Minami-Ku JP Kyoto Tel Fax workman@kdsjpncojp wwwkdsjpncojp LITHUANIA Skaida-nf UAB A Gostauto LT Vilnius Tel Fax skaidanf@maillt LUXEMBOURG Sortimo BELUX bvba Schaarbeeklei 491 B Vilvoorde Tel Fax info@sortimobe wwwsortimobe NETHERLANDS Sortimo Nederland BV Nijverheidstraat 11 NL GX Bergambacht Tel Fax info@sortimonl wwwsortimonl NORWAY Sortimo A/S Ulvenveien 92 A N Oslo Tel Fax firmapost@sortimono wwwsortimono POLAND MobilCar sc Dobrzen 26 PL Dobroszyce Tel Fax sortimo@mobilcarpl wwwmobilcarpl ROMANIA SC Total Idea SRL Str Comisani nr 18 Sector 4 RO Bucuresti Tel georgeanghelus@totalidearo wwwauto-sculero RUSSIA Forward Service Ochakovskoe sh 32 RU Moscow Tel Fax info@sortimoru wwwsortimoru SERBIA Sorti oprema doo Krajiŝka 21 RS Zemun Tel Fax sortimo@giuliccacom wwwsortimors SLOVAKIA Technia spol sro Komárňanská cesta 72 SK Nové Zámky Tel Fax technia@techniask wwwtechniask SLOVENIA Sortimosi doo Gerbičeva Ljubljana Tel +386 (0) Fax +386 (0) sortimo@sortimosi wwwsortimosi SPAIN / PORTUGAL Sortimo Ibérica Comercio y Servicios SL Ctra M-106 km 2 PI Garza 2 nave 29 ES Algete (Madrid) Tel Fax info@sortimoes wwwsortimoes SOUTH KOREA Rocky Co Ltd 4 BL-4 LT Namdong Industrial Complex Namchon Dong Nandong-Gu KR Incheon Tel Fax wwwrockycokr galantvr4@navercom SWEDEN Sortimo AB Box 9173 SE Göteborg Tel Fax info@sortimose wwwsortimose SWITZERLAND Walter Rüegg AG Sortimo Zentrum Grabenackerstr 1 CH Oberhasli Tel Fax info@sortimoch wwwsortimoch TURKEY DORSER OTOMOTIV AS Cumhuriyet Mah TÖzal CD119/A Çayırova KOCAELİ Tel Fax info@dorsercom wwwdorsercom USA / NORTH AMERICA (Canada, USA, Mexico) Sortimo of North America, Inc 3055 Northwoods Cir US Norcross, GA Tel (toll free) Tel Fax info@sortimous wwwsortimous VENEZUELA Servibus de Venezuela CA Avenida Los Parceleros Calle N Zona Industrial, Aguas Calientes YV - Ureña - Estado Táchira Tel Fax servibusca@gmailcom wwwservibuscomve 58 59

31 SORTIMO DIRECT INFO-SCHECK MORE INFORMATION AUSSEN FORD INNEN SORTIMO WE ARE ALWAYS THERE FOR YOU! YOUR CONTACT TO SORTIMO CALL US IN GERMANY: Tel Fax wwwsortimocom/direct wwwsortimocom MORE INFORMATION SIMPLY FILL OUT THE FORM AND FAX IT TO SORTIMO ON Please send me further information and brochures free of charge: Mobile Assortment catalogue Original Accessories catalogue WorkMo Brochure I would like to have a consultation to find out more about Sortimo van racking solutions Please call me back to arrange an appointment with no obligation My telephone number is: I would like to subscribe to the Sortimo Newsletter free of charge My address is:t: Company name Surname, first name Street Postcode City Tel Fax Line of business Date Signature (company stamp) THANK YOU FOR YOUR INTEREST AND WE LOOK FORWARD TO HEARING FROM YOU! Sortimo International GmbH Dreilindenstraße Zusmarshausen Tel Fax wwwsortimocom wwwsortimocom/catalogues 60 61

32 For more information wwwsortimocom Call us in Germany / Subject to changes, that serve the technical progress, mistakes and errors Sortimo International GmbH Dreilindenstraße Zusmarshausen GERMANY Tel Fax info@sortimocom wwwsortimocom