PoNET kbd48cnc. User s manual
|
|
- Shon Miles
- 8 years ago
- Views:
Transcription
1 PoNET kbd48cnc User s manual Version: 16/10/2012
2 SAFETY INFORMATION! This product is intended for integration by the user into a computer numerical control (CNC) machine. It is the user's responsibility to assess the overall system design and address all safety considerations that affect the users and equipment. The user assumes all responsibility for system design, including compliance with regulatory standards and codes issued by the applicable entities. PoLabs do not make any claims as to the suitability of this equipment for the user s application. Serious personal injury or equipment damage can occur from the improper integration, installation or operation of this product. This product is not guaranteed to be fail-safe. The system that this equipment is used with shall be fitted with a separate means of fail-safe protection, emergency-stop capability and/or system power removal. This equipment may be connected to dangerous power sources, including electrical power sources. Dangerous voltage levels may be present at this equipment or at connected devices. Measures must be taken to prevent persons from contacting voltage sources which may be present. Equipment should be housed inside an enclosure suitable for the intended environment. Safety interlocks should be provided to prevent any and all dangers to personnel. CNC machine tools are inherently dangerous, and can cause injury to operators and maintenance personnel. Operators and maintenance personnel shall be properly trained in the safe use, operation and maintenance of such machines. Automated machines that this equipment may be used with can move at any time. All persons exposed to such machines must understand the dangers that are present. 2
3 Description PoNET kbd48cnc is an excellently machined extension keyboard for PoKeys devices in CNC machines. The keyboard has 48 buttons with graphics that equal to most commonly used symbols and functions of a CNC machine. For providing additional feedback functionality, each key is equipped with a red LED backlight, which can indicate various states of the CNC machine. Keyboard can be customized and used as a general purpose matrix keyboard without any additional software. However, applications that are aware of the keyboard (e.g. PoKeys Mach3 plugin) can make a full use of its functionality. Two LEDs on the keyboard are used to indicate power supply and device status.»power LED«(red color) switches on immediately after power supply is connected, while»status LED«(green color) signals the current status of the device: - Solid On: device is connected and working normally - Slow blinking: no connection to Pokeys device - Fast blinking: bootloader operation - Solid Off: device disabled The keyboard is also equipped with a light sensor, which can be used to monitor the level of the ambient light and adjust the brightness of the LEDs. Specifications Dimensions: 295mm X 105mm X 4mm Power supply: 5V ±10% Power consumption: Number of keys/leds: Interface: max 400mA (depending on number and brightness of output diodes) 48 arranged in 3 groups of 4x4 PoNET (supported by PoKeys56 devices) 3
4 Front panel cutout dimensions 4
5 Connecting to PoKeys device and configuration Connect the PoNET keyboard device to the PoKeys device with the supplied cable. There are two identical connectors on each device that enable parallel connection of multiple devices via PoNET bus. Serial Clock NC Serial Data GND +3V3 PoKeys configuration software must be used to initialize the connection between kbd48cnc and PoKeys device. Run PoKeys configuration software, connect to PoKeys device and go to Peripherals > PoNET menu. The following dialog will appear: Figure 1: PoNet configuration dialog showing a unconfigured device On the left, all PoNET devices are listed. Unconfigured PoNET devices will be listed as illustrated above. To configure the new device, double click on Unconfigured device icon and press any key on the device that you want to add (you have a 10 seconds time window to do that). If configuration process for a device was successful, the green»status LED«will stop to blink and will be constantly lit. The device will also be listed as»configured device«in the dialog. To change the settings of the device, click on the configured device in the list on the left. If you will be using the kbd48cnc with a PoKeys Mach3 plugin, no additional settings are necessary. Close the dialog and click the button Send settings to device, which will save the configuration. 5
6 Figure 2: Settings for a configured device Standalone operation as a matrix keyboard If you wish to configure the keyboard manually without the use of the kbd48cnc aware application, check the option Enable mapping to matrix keyboard option in the PoNET device settings. Then, close this dialog and click Send to device button and restart the application. Open the Peripherals > Matrix Keyboard menu, where you can track your keyboard actions and define key mapping options. 6
7 The following naming scheme is used for buttons on the kbd48cnc Matrix keyboard key indexing: 7
8 Connecting kbd48cnc to the PoKeys56 device and configuring it in Mach3 1. Connect the kbd48cnc to the PoKeys56 device with the provided cable 2. Connect the PoKeys56 device to PC 3. Open PoKeys configuration software and connect to your device 4. Go to Peripherals > PoNET settings 8
9 If Unconfigured device display is not present, please check the cable connections and click Refresh button. 5. Double click on the Unconfigured device double click to add entry and press any key on the kbd48cnc within 10 seconds. If device was recognized, the following will appear and the green LED on the kbd48cnc will stop blinking 6. Check the Assigned I2C address display. If it does not display 1, click the Re-initialize button and repeat step When using kbd48cnc, Enable mapping to matrix keyboard should not be checked. In the bottom part of the dialog, various test modes are available to test the keyboard (these will function only when the PoNET settings dialog is open). a. LED test mode: any key press will start a wave like pattern radiating from the key that was pressed b. LED test mode 2 (random): LEDs will be randomly blinked c. Backlight test: ambient light sensor is used to set the LED brightness d. Light sensor test: (light) displays the amount of ambient light detected 8. Close PoNET settings dialog and click Send to device button to save the settings. Then close the PoKeys application. 9
10 9. Open Mach3 (it Mach3 PoKeys plugin is not yet installed, follow the steps in PoKeys Mach3 plugin manual to install it. 10. Go to Config -> Config plugins and click yellow CONFIG button for the PoKeys plugin 11. Select your PoKeys device and click Configure 10
11 If no device is displayed, follow the steps in the PoKeys Mach3 plugin manual to add it. 12. Go to Import/Export tab and select kbd48cnc mapping. Then click Import and select the kbd48cnc.xml file that is available as a download kbd48cnc Mach3 plugin setup' from poscope.com (please download the file and use WinZip or similar program to extract the contents of the file). 13. The previous step will load the default configuration for the keyboard. To change the default setup, go to PoKeys mapping tab and find kbd48cnc. This section is used to setup the buttons in all three sections of the keyboard. Function of a button is simply changed by selecting a different LED or button mapping from the list of available OEM LEDs or buttons. 11
12 14. To setup the keyboard LEDs under the keys, go to kbd48cnc LED section. 15. To save the settings, click OK. 12
13 Please read the following notes 1. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. 2. PoLabs does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of PoLabs products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of PoLabs or others. PoLabs claims the copyright of, and retains the rights to, all material (software, documents, etc.) contained in this release. You may copy and distribute the entire release in its original state, but must not copy individual items within the release other than for backup purposes. 3. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of the products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. PoLabs assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 4. PoLabs has used reasonable care in preparing the information included in this document, but PoLabs does not warrant that such information is error free. PoLabs assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. 5. PoLabs devices may be used in equipment that does not impose a threat to human life in case of the malfunctioning, such as: computer interfaces, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment, and industrial robots. 6. Measures such as fail-safe function and redundant design should be taken to ensure reliability and safety when PoLabs devices are used for or in connection with equipment that requires higher reliability, for example: traffic control systems, anti-disaster systems, anticrime systems, safety equipment, medical equipment not specifically designed for life support, and other similar applications. 7. PoLabs devices shall not be used for or in connection with equipment that requires an extremely high level of reliability and safety, as for example: aircraft systems, aerospace equipment, nuclear reactor control systems, medical equipment or systems for life support (e.g. artificial life support devices or systems), and any other applications or purposes that pose a direct threat to human life. 8. You should use the PoLabs products described in this document within the range specified by PoLabs, especially with respect to the maximum rating, operating supply voltage range and other product characteristics. PoLabs shall have no liability for malfunctions or damages arising out of the use of PoLabs products beyond such specified ranges. 9. Although PoLabs endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, PoLabs products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a PoLabs product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. 10. Usage: the software in this release is for use only with PoLabs products or with data collected using PoLabs products. 11. Fitness for purpose: no two applications are the same, so PoLabs cannot guarantee that its equipment or software is suitable for a given application. It is therefore the user's responsibility to ensure that the product is suitable for the user's application. 12. Viruses: this software was continuously monitored for viruses during production, however the user is responsible for virus checking the software once it is installed. 13. Upgrades: we provide upgrades, free of charge, from our web site at. We reserve the right to charge for updates or replacements sent out on physical media. 14. Please contact a PoLabs support for details as to environmental matters such as the environmental compatibility of each PoLabs product. Please use PoLabs products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. PoLabs assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 15. Please contact a PoLabs support at support@poscope.com if you have any questions regarding the information contained in this document or PoLabs products, or if you have any other inquiries. 16. The licensee agrees to allow access to this software only to persons who have been informed of and agree to abide by these conditions. 17. Trademarks: Windows is a registered trademark of Microsoft Corporation. PoKeys, PoKeys55, PoKeys56U, PoKeys56E, PoScope, PoLabs and others are internationally registered trademarks. 13
Old Company Name in Catalogs and Other Documents
To our customers, Old Company Name in Catalogs and Other Documents On April 1 st, 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took
More informationOld Company Name in Catalogs and Other Documents
To our customers, Old Company Name in Catalogs and Other Documents On April 1 st, 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took
More informationDUKANE Intelligent Assembly Solutions
PC Configuration Requirements: Configuration Requirements for ipc Operation The hardware and operating system of the PC must comply with a list of minimum requirements for proper operation with the ipc
More informationOld Company Name in Catalogs and Other Documents
To our customers, Old Company Name in Catalogs and Other Documents On April 1 st, 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took
More informationDPDT SWITCH FOR 2.4 GHz AND 6 GHz DUAL-BAND WIRELESS LAN
GaAs INTEGRATED CIRCUIT PG2164T5N DPDT SWITCH FOR 2.4 GHz AND 6 GHz DUAL-BAND WIRELESS LAN DESCRIPTION The PG2164T5N is a GaAs MMIC DPDT (Double Pole Double Throw) switch which was developed for 2.4 GHz
More informationOld Company Name in Catalogs and Other Documents
To our customers, Old Company Name in Catalogs and Other Documents On April st,, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all
More informationDATA SHEET. The information in this document is subject to change without notice.
DATA SHEET AUTOMOTIVE RELAYS EP2/EP1 SERIES DESCRIPTION The NEC TOKIN EP2 / EP1 series are PC-board mount type automotive relays suitable for various motor controls and other applications that require
More informationThe following document contains information on Cypress products.
The following document contains information on Cypress products. 32-BIT MICROCONTROLLER MB9B100A/MB9B300A/MB9B400A/MB9B500A Series FM3 family inverter solution GUI User Manual TM ARM and Cortex-M3 are
More informationProcedure for updating Firmware of EZ4 W or ICC50 W
Procedure for updating Firmware of EZ4 W or ICC50 W 1. Download the Firmware file for your camera to your PC 2. Download the Leica Camera Configuration program to your PC 3. Install Leica Camera Configuration
More informationBIPOLAR ANALOG INTEGRATED CIRCUIT
DATA SHEET BIPOLAR ANALOG INTEGRATED CIRCUIT μpc823tu SiGe:C LOW NOISE AMPLIFIER FOR GPS DESCRIPTION The μpc823tu is a silicon germanium carbon (SiGe:C) monolithic integrated circuit designed as low noise
More informationDATA SHEET COMPACT AND LIGHTWEIGHT, SMALL MOUNTING SIZE, HIGH BREAKDOWN VOLTAGE
DATA SHEET MINIATURE SIGNAL RELAY EC SERIES COMPACT AND LIGHTWEIGHT, SMALL MOUNTING SIZE, HIGH BREAKDOWN VOLTAGE DESCRIPTI The EC series has reduced mounting space but sustained high-performance of NEC
More informationwww.rohm.com 2012.04 - Rev.F 1/3 c 2013 ROHM Co., Ltd. All rights reserved.
c 2013 ROHM Co., Ltd. All rights reserved. 1/3 2012.04 - Rev.F SIP Design Support Document c 2013 ROHM Co., Ltd. All rights reserved. 2/3 2012.04 - Rev.F SIP Design Support Document c 2013 ROHM Co., Ltd.
More informationVM-4 USB Desktop Audio Device Installation Guide
VM-4 USB Desktop Audio Device Installation Guide THE POSSIBILITIES ARE ENDLESS. 9 Austin Drive, Marlborough, CT 06447 (860) 295-8100 www.essentialtel.com sales@essentialtel.com Table of Contents Introduction...3
More informationInfoPrint 4247 Serial Matrix Printers. Remote Printer Management Utility For InfoPrint Serial Matrix Printers
InfoPrint 4247 Serial Matrix Printers Remote Printer Management Utility For InfoPrint Serial Matrix Printers Note: Before using this information and the product it supports, read the information in Notices
More informationBIPOLAR ANALOG INTEGRATED CIRCUIT
DATA SHEET BIPOLAR ANALOG INTEGRATED CIRCUIT μpc8tk SiGe:C LOW NOISE AMPLIFIER FOR GPS/MOBILE COMMUNICATIONS DESCRIPTION The μpc8tk is a silicon germanium carbon (SiGe:C) monolithic integrated circuit
More informationVM-8 USB Desktop Audio Device Installation Guide
VM-8 USB Desktop Audio Device Installation Guide THE POSSIBILITIES ARE ENDLESS. 9 Austin Drive, Marlborough, CT 06447 (860) 295-8100 www.essentialtel.com sales@essentialtel.com Table of Contents Introduction...3
More informationKvaser Mini PCI Express User s Guide
Kvaser Mini PCI Express User s Guide Copyright 2013-2014 Kvaser AB, Mölndal, Sweden http://www.kvaser.com Printed Sunday 28 th September, 2014 We believe that the information contained herein was accurate
More informationJPD-FFB-A Vibration USB gamepad with audio USER MANUAL
Disclaimer We spared no efforts to make sure that the information in this manual is correct and complete. However no liability is accepted for any errors or omissions. Gembird Electronics reserves the
More informationContents Legal Notices... 2 Preface... 5 Introduction... 7 Installation Instructions... 8
Unifier File Transfer Utility Instructions Release 9.13.0.0 August 2013 Legal Notices Oracle Primavera Unifier File Transfer Utility Instructions Copyright 1998, 2013, Oracle and/or its affiliates. All
More informationHow to read this guide
How to read this guide The following shows the symbols used in this Quick start guide with descriptions and examples. Symbol Description Example P oint Reference Caution [ ] This symbol explains information
More informationConnection Cable for LED Driver Board
Connection Cable for LED Driver Board 2CBL03 DATA SHEET DOD-PP-07 (st edition) All information is subject to change without notice. Please confirm the sales representative before starting to design your
More informationHow to Mimic the PanelMate Readout Template with Vijeo Designer
Data Bulletin 8000DB0709 04/2010 Raleigh, NC, USA How to Mimic the PanelMate Readout Template with Vijeo Designer Retain for future use. Overview The purpose of this data bulletin is to provide step-by-step
More informationMicroTech II McQuay Maverick II Rooftop Unit Controller BACnet Communication Module (MS/TP)
Installation and Maintenance Manual IM 852 Group: Controls Part Number: IM 852 Date: June 2007 Supercedes: New MicroTech II McQuay Maverick II Rooftop Unit Controller BACnet Communication Module (MS/TP)
More informationAPPLICATION NOTE. AT16268: JD Smart Cloud Based Smart Plug Getting. Started Guide ATSAMW25. Introduction. Features
APPLICATION NOTE AT16268: JD Smart Cloud Based Smart Plug Getting Started Guide ATSAMW25 Introduction This application note aims to help readers to get started with the Atmel smart plug reference design
More informationSoftRAID 5 QUICK START GUIDE. for OWC ThunderBay
SoftRAID 5 QUICK START GUIDE for OWC ThunderBay TABLE OF CONTENTS INTRODUCTION...1 1.1 MINIMUM SYSTEM REQUIREMENTS 1.2 FEATURES 1.3 ABOUT THIS MANUAL SYSTEM SETUP...2 2.1 GETTING STARTED 2.2 INITIALIZING,
More informationGuide to Installing BBL Crystal MIND on Windows 7
Guide to Installing BBL Crystal MIND on Windows 7 Introduction The BBL Crystal MIND software can not be directly installed on the Microsoft Windows 7 platform, however it can be installed and run via XP
More informationTCP/IP MODULE CA-ETHR-A INSTALLATION MANUAL
TCP/IP MODULE CA-ETHR-A INSTALLATION MANUAL w w w. c d v g r o u p. c o m CA-ETHR-A: TCP/IP Module Installation Manual Page Table of Contents Introduction...5 Hardware Components... 6 Technical Specifications...
More informationTM-54101 XpressNet, S88N - PC interface
TM-54101 XpressNet, S88N - PC interface User's manual 2011 BioDigit Ltd. All rights reserved. It is forbidden to reproduce and/or publish the contents of the present document in any form including electronic
More informationOracle Enterprise Manager
Oracle Enterprise Manager System Monitoring Plug-in Installation Guide for Microsoft Internet Information Services Release 12.1.0.2.0 E28547-05 February 2014 This document provides a brief description
More informationNetwork Interface Panel User s Guide NPD4747-01 EN
User s Guide NPD4747-01 EN Contents Contents Copyright and Trademarks Safety Instructions Important Safety Instructions... 4 Cautions and Notes... 4 Getting to Know Your Network Interface Panel Package
More informationHG2 Series Product Brief
Solid State Drives Product Brief - 1 - Rev.2 1. SCOPE T his document describes the specifications of the following model 1.1 2.5inch Case Type Product Number THNS064GG2BB THNS128GG4BB THNS256GG8BB THNS512GG8BB
More informationFlarm LED indicator. Version 1.1
Flarm LED indicator Version 1.1 LXNAV d.o.o. Kidričeva 24a, 3000 Celje, Slovenia tel +386 592 33 400 fax +386 599 33 522 info@lxnav.com www.lxnav.com 1 Important Notices 3 1.1 Limited Warranty 3 2 Packing
More informationDATA SHEET PNP SILICON EPITAXIAL TRANSISTOR FOR HIGH-VOLTAGE HIGH-SPEED SWITCHING
DATA SHEET SILICON POWER TRANSISTOR 2SA1010 PNP SILICON EPITAXIAL TRANSISTOR FOR HIGH-VOLTAGE HIGH-SPEED SWITCHING The 2SA1010 is a mold power transistor developed for highvoltage high-speed switching,
More informationOracle Enterprise Manager
Oracle Enterprise Manager System Monitoring Plug-in Installation Guide for Microsoft Active Directory Release 12.1.0.1.0 E28548-04 February 2014 Microsoft Active Directory, which is included with Microsoft
More informationPowerline 500 WiFi Access Point XWN5001 Installation Guide
Powerline 500 WiFi Access Point XWN5001 Installation Guide Technical Support Thank you for selecting NETGEAR products. After installing your device, locate the serial number on the label of your product
More informationUSBSPYDER08 Discovery Kit for Freescale MC9RS08KA, MC9S08QD and MC9S08QG Microcontrollers User s Manual
USBSPYDER08 Discovery Kit for Freescale MC9RS08KA, MC9S08QD and MC9S08QG Microcontrollers User s Manual Copyright 2007 SofTec Microsystems DC01197 We want your feedback! SofTec Microsystems is always on
More informationInstalling Your MS Access Database (Manual Installation Instructions)
Installing Your MS Access Database (Manual Installation Instructions) Installation and Setup Instructions... 1 Single User Setup... 1 Multiple User Setup... 2 Adjusting Microsoft Access 2003 Macro Security...
More informationTOSHIBA Transistor Silicon PNP Epitaxial Type (PCT Process) 2SA1020
2SA12 TOSHIBA Transistor Silicon PNP Epitaxial Type (PCT Process) 2SA12 Power Amplifier Applications Power Switching Applications Unit: mm Low Collector saturation voltage: V CE (sat) =.5 V (max) (I C
More informationDiamond II v2.3 Service Pack 4 Installation Manual
Diamond II v2.3 Service Pack 4 Installation Manual P/N 460987001B ISS 26APR11 Copyright Disclaimer Trademarks and patents Intended use Software license agreement FCC compliance Certification and compliance
More informationPePWave Surf Series PePWave Surf Indoor Series: Surf 200, AP 200, AP 400
PePWave Surf Series PePWave Surf Indoor Series: Surf 200, AP 200, AP 400 PePWave Surf Outdoor Series: Surf AP 200/400-X, PolePoint 400-X, Surf 400-DX User Manual Document Rev. 1.2 July 07 COPYRIGHT & TRADEMARKS
More informationGP2Y0A02YK0F. Distance Measuring Sensor Unit Measuring distance: 20 to 150 cm Analog output type GP2Y0A02YK0F
GP2Y0A02YK0F Distance Measuring Sensor Unit Measuring distance: 20 to 150 cm Analog output type Description GP2Y0A02YK0F is a distance measuring sensor unit, composed of an integrated combination of PSD
More informationContents. Hardware Configuration... 27 Uninstalling Shortcuts Black...29
Contents Getting Started...1 Check your Computer meets the Minimum Requirements... 1 Ensure your Computer is Running in Normal Sized Fonts... 7 Ensure your Regional Settings are Correct... 9 Reboot your
More informationISP Engineering Kit Model 300
TM ISP Engineering Kit Model 300 December 2013 Model 300 Overview The Model 300 programmer supports JTAG programming of all Lattice devices that feature non-volatile configuration elements. The Model 300
More informationSMART Board 8055i and 8055i-SMP
SMART Board 8055i and 8055i-SMP Interactive flat panel Installation guide Product registration If you register your SMART product, we ll notify you of new features and software upgrades. Register online
More informationPRTR5V0U2F; PRTR5V0U2K
Rev. 02 19 February 2009 Product data sheet 1. Product profile 1.1 General description Ultra low capacitance double rail-to-rail ElectroStatic Discharge (ESD) protection devices in leadless ultra small
More informationSoftware User Guide UG-461
Software User Guide UG-461 One Technology Way P.O. Box 9106 Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 Fax: 781.461.3113 www.analog.com ezlinx icoupler Isolated Interface Development Environment
More informationSystemGuard. Brief Description. Benefits. SystemGuard Main Window
SystemGuard Issue May 2009 Product SystemGuard Pages 8 Brief Description SystemGuard is an application software (published under freeware terms and conditions) from Fujitsu Technology Solutions which can
More informationBlock 3 Size 0 KB 0 KB 16KB 32KB. Start Address N/A N/A F4000H F0000H. Start Address FA000H F8000H F8000H F8000H. Block 2 Size 8KB 16KB 16KB 16KB
APPLICATION NOTE M16C/26 1.0 Abstract The following article describes using a synchronous serial port and the FoUSB (Flash-over-USB ) Programmer application to program the user flash memory of the M16C/26
More informationJKW-IP. IP Video Entry System. QuikStart Guide
1210 JKW-IP IP Video Entry System QuikStart Guide This is an abbreviated instruction manual for installation purposes. Please see the JKW-IP Installation Manual and JKW-IP Operation Manual for complete
More informationInstallation Guide Wireless 4-Port USB Sharing Station. GUWIP204 Part No. M1172-a
Installation Guide Wireless 4-Port USB Sharing Station 1 GUWIP204 Part No. M1172-a 2011 IOGEAR. All Rights Reserved. PKG-M1172-a IOGEAR, the IOGEAR logo, MiniView, VSE are trademarks or registered trademarks
More informationImaging Computing Server User Guide
Imaging Computing Server User Guide PerkinElmer, Viscount Centre II, University of Warwick Science Park, Millburn Hill Road, Coventry, CV4 7HS T +44 (0) 24 7669 2229 F +44 (0) 24 7669 0091 E cellularimaging@perkinelmer.com
More informationGETTING TO KNOW YOUR 4G USB
GETTING TO KNOW YOUR Telstra Pre-paid 4G USB LET S GET THIS SHOW ON THE ROAD WHAT S INSIDE Your Telstra Pre-Paid 4G USB has been tested to the highest standards to deliver you the best possible coverage
More informationOperating instructions Diffuse reflection sensor with background suppression O1D101 O1D104 706114 / 00 01 / 2012
Operating instructions Diffuse reflection sensor with background suppression O1D101 O1D104 706114 / 00 01 / 2012 Contents 1 Preliminary note 3 1.1 Symbols used 3 1.2 Warning signs used 3 2 Safety instructions
More informationUsing Bluetooth-Enabled PosiTector 6000 with Statistical Process Control Software
Using Bluetooth-Enabled PosiTector 6000 with Statistical Process Control Software SPC programs are available from third party vendors that enhance the measurement capabilities of the PosiTector 6000. With
More informationPMEG1020EA. 1. Product profile. 2 A ultra low V F MEGA Schottky barrier rectifier. 1.1 General description. 1.2 Features. 1.
Rev. 04 30 December 2008 Product data sheet 1. Product profile 1.1 General description Planar Maximum Efficiency General Application (MEGA) Schottky barrier rectifier with an integrated guard ring for
More informationENLTV-FM3. PCI TV Tuner Adapter with FM Radio. User s Guide
ENLTV-FM3 PCI TV Tuner Adapter with FM Radio User s Guide User s Notice No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored
More informationOutlook Profile Setup Guide Exchange 2010 Quick Start and Detailed Instructions
HOSTING Administrator Control Panel / Quick Reference Guide Page 1 of 9 Outlook Profile Setup Guide Exchange 2010 Quick Start and Detailed Instructions Exchange 2010 Outlook Profile Setup Page 2 of 9 Exchange
More informationMasterBlaster Serial/USB Communications Cable User Guide
MasterBlaster Serial/USB Communications Cable User Guide 101 Innovation Drive San Jose, CA 95134 www.altera.com Software Version: 80 Document Version: 1.1 Document Date: July 2008 Copyright 2008 Altera
More informationTOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic TAR5SB15~TAR5SB50
TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic TARSB~TARSB Point Regulators (Low-Dropout Regulator) TARSB~TARSB The TARSBxx Series is comprised of general-purpose bipolar single-power-supply
More informationSIMATIC NET. CP 243-2 AS-Interface Master B C. Preface Contents. Technical Description and Installation Instructions Interface to the User Program
Preface Contents SIMATIC NET CP 243-2 AS-Interface Master Manual Technical Description and Installation Instructions Interface to the User Program 2 in the S7-200 CPU Access to the Data of the AS-i Slaves
More informationSOLAROX RGB-Master Pro LAN. RGB-Master Pro LAN. Network-compatible RGBW Controller -
RGB-Master Pro LAN Network-compatible RGBW Controller - Seite 1 / 13 Introduction Thank you for purchasing to the Solarox RGB-Master Pro LAN. The Solarox RGB-Master Pro LAN is a highly-developed, network-compatible
More informationTPN4R712MD TPN4R712MD. 1. Applications. 2. Features. 3. Packaging and Internal Circuit. 2014-12 2015-04-21 Rev.4.0. Silicon P-Channel MOS (U-MOS )
MOSFETs Silicon P-Channel MOS (U-MOS) TPN4R712MD TPN4R712MD 1. Applications Lithium-Ion Secondary Batteries Power Management Switches 2. Features (1) Low drain-source on-resistance: R DS(ON) = 3.8 mω (typ.)
More informationBrightStor ARCserve Backup for Windows
BrightStor ARCserve Backup for Windows Tape RAID Option Guide r11.5 D01183-1E This documentation and related computer software program (hereinafter referred to as the "Documentation") is for the end user's
More informationFingerprint Identity User Manual for the Griaule Biometric Framework 040-0103-01 Rev 1.00
Fingerprint Identity User Manual for the Griaule Biometric Framework 040-0103-01 Rev 1.00 www.griaulebiometrics.com Brazil Phone: 55-19-3289-2108 USA Phone: (408) 490 3438 Fingerprint Identity Index Getting
More informationCX Series. Video Recording Server. Quick Start Guide CX784 / CX788 / CX7816. Version 1.05.00
CX Series Video Recording Server CX784 / CX788 / CX7816 Quick Start Guide Version 1.05.00 Contents 1.Introduction...1 1.1.Packages Contents...1 1.2.Hardware Features...2 1.3.Functional Features...4 1.4.Hard
More information**Please read this manual carefully before you use the product**
-1- **Please read this manual carefully before you use the product** Description: The CEB-2355S is a multifunction storage device designed in a special body structure, which can be simply connected to
More informationSSM3K335R SSM3K335R. 1. Applications. 2. Features. 3. Packaging and Pin Configuration. 2012-07-19 Rev.3.0. Silicon N-Channel MOS (U-MOS -H)
MOSFETs Silicon N-Channel MOS (U-MOS-H) SSM3K335R SSM3K335R 1. Applications Power Management Switches DC-DC Converters 2. Features (1) 4.5-V gate drive voltage. (2) Low drain-source on-resistance : R DS(ON)
More informationV850. Application Note. 32-Bit Single-Chip Microcontrollers AES 128 Encryption/Decryption. Document No. U19668EE1V0AN00 Date Published January 2009
Application Note V850 32-Bit Single-Chip Microcontrollers AES 128 Encryption/Decryption Document No. U19668EE1V0AN00 Date Published January 2009 NEC Electronics (Europe) GmbH DISCLAIMER The related documents
More informationA6210 WiFi USB Adapter 802.11ac USB 3.0 Dual Band User Manual
802.11ac USB 3.0 Dual Band User Manual August 2014 202-11373-01 350 East Plumeria Drive San Jose, CA 95134 USA Support Thank you for selecting NETGEAR products. After installing your device, locate the
More informationPN 100-06843L, Revision B, October 2013. Epic 950 TM. Master Programmer User s Guide
PN 100-06843L, Revision B, October 2013 Epic 950 TM Master Programmer User s Guide This page intentionally left blank Change History Rev A Initial release Feb 2007 Rev B Update Oct 2013 100-06843L Rev
More informationTrusted Platform Module (TPM) Quick Reference Guide
Trusted Platform Module (TPM) Quick Reference Guide System builders/integrators should give this Guide to the system owners to assist them in enabling and activating the Trusted Platform Module. Warning
More informationTransmitter Interface Program
Transmitter Interface Program Operational Manual Version 3.0.4 1 Overview The transmitter interface software allows you to adjust configuration settings of your Max solid state transmitters. The following
More informationNVIDIA NVIEW DESKTOP MANAGEMENT SOFTWARE
NVIDIA NVIEW DESKTOP MANAGEMENT SOFTWARE TB-03966-001_v03 September 2013 Technical Brief DOCUMENT CHANGE HISTORY TB-03966-001_v03 Version Date Authors Description of Change 01 April 21, 2008 DW Initial
More informationUsing the NI 17xx Smart Camera Direct Drive Lighting Controller
Using the NI 17xx Smart Camera Direct Drive Lighting Controller Overview The use of proper lighting is often overlooked when designing a machine vision application. More robust and accurate inspections
More informationSYSTEM 4C. C R H Electronics Design
SYSTEM 4C C R H Electronics Design SYSTEM 4C All in one modular 4 axis CNC drive board By C R Harding Specifications Main PCB & Input PCB Available with up to 4 Axis X, Y, Z, A outputs. Independent 25
More informationImportant. Please read this User s Manual carefully to familiarize yourself with safe and effective usage.
Important Please read this User s Manual carefully to familiarize yourself with safe and effective usage. About ScreenManager Pro for LCD... 3 1. Setting Up... 4 1-1. System Requirements...4 1-2. Installing
More informationSilicon Planar Zener Diode for Surge Absorption and Stabilizer
Silicon Planar Zener Diode for Surge Absorption and Stabilizer Features These diodes are delivered taped. Ultra small Resin Package (URP) is suitable for surface mount design. Ordering Information REJ3G1512-2
More informationL5354 ControlNet Communications Interface
L5354 ControlNet Communications Interface Technical Manual HA470733 Issue 2 Copyright SSD Drives Inc 2005 All rights strictly reserved. No part of this document may be stored in a retrieval system, or
More informationLifecycle Service Tool. Operator's manual
REF 542plus 1MRS756725 Issued: 23.12.2008 Version: A/23.12.2008 REF 542plus Contents Copyrights... 5 1. Introduction...7 1.1. This manual... 7 1.2. Use of symbols... 7 1.3. Intended audience... 7 1.4.
More informationUniversal Push2TV HD Adapter PTVU1000 Installation Guide
Universal Push2TV HD Adapter PTVU1000 Installation Guide 2011 NETGEAR, Inc. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or
More information1CH VIDEO SERVER INSTALLATION GUIDE. Please read instructions thoroughly before operation and retain it for future reference.
314Z 1CH VIDEO SERVER INSTALLATION GUIDE Please read instructions thoroughly before operation and retain it for future reference. x931_931a_v1.1 314Z 1CH VIDEO SERVER INSTALLATION GUIDE Please read instructions
More informationSoftware Evaluation Guide for Microsoft Office Excel 2010* and WinZip 15.5*
Software Evaluation Guide for Microsoft Office Excel 2010* and WinZip 15.5* Version 2011-06 Rev. 1.2 Information in this document is provided in connection with Intel products. No license, express or implied,
More informationStarWind iscsi SAN Software: Installing StarWind on Windows Server 2008 R2 Server Core
StarWind iscsi SAN Software: Installing StarWind on Windows Server 2008 R2 Server Core www.starwindsoftware.com Copyright 2008-2011. All rights reserved. COPYRIGHT Copyright 2008-2011. All rights reserved.
More informationOracle FLEXCUBE Direct Banking Android Tab Client Installation Guide Release 12.0.3.0.0
Oracle FLEXCUBE Direct Banking Android Tab Client Installation Guide Release 12.0.3.0.0 Part No. E52543-01 April 2014 Oracle Financial Services Software Limited Oracle Park Off Western Express Highway
More informationOracle Banking Digital Experience
Oracle Banking Digital Experience Dashboard Widgets Personal Finance Management User Manual Release 15.1.0.0.0 Part No. E66313-01 October 2015 Dashboard Widgets Personal Finance Management User Manual
More informationMonitoring the Switch
CHAPTER6 Any problem in your switch can affect a large proportion of your users. Implementing a preventive approach to switch monitoring helps you to detect problems early and to avoid potential problems.
More informationOracle Virtual Desktop Client. Release Notes for Release 3.2
Oracle Virtual Desktop Client Release s for Release 3.2 E36350-03 January 2013 Oracle Virtual Desktop Client: Release s for Release 3.2 Copyright 2013, Oracle and/or its affiliates. All rights reserved.
More informationCrow Limited Warranty. Print Version 017
Crow Limited Warranty (Crow) warrants this product to be free from defects in materials and workmanship under normal use and service for a period of one year from the last day of the week and year whose
More informationCalrec SoundGrid I/O. User Guide
Calrec SoundGrid I/O User Guide 1 TABLE OF CONTENTS 1. Introduction... 3 1.1 About SoundGrid and the Calrec Audio Interface... 3 1.2 Typical Uses... 4 1.3 Native/SoundGrid Comparison Table... 6 2. Hardware
More informationUser Guide. BlackBerry Remote Stereo Gateway
User Guide BlackBerry Remote Stereo Gateway MAT-17698-001 PRINTSPEC-021 SWD-324580-0416090732-001 Contents Basics...3 About the BlackBerry Remote Stereo Gateway...3 Components...4 LED notification...5
More informationCelluon Laserkey - User Guide for Microsoft Windows XP
Celluon Laserkey - User Guide for Microsoft Windows XP INDEX 1. System Requirements... 2 2. Installation / Uninstalling the Driver... 2 3. Bluetooth dongle software settings... 3 4. Connection Method...4
More information64-Bit Compatibility with Micromeritics Applications
Tech Tip 7 64-Bit Compatibility with Micromeritics Applications Micromeritics products are designed to operate in most Microsoft Windows environments. However, more current versions of Microsoft Windows,
More informationPLCM-T1 / PLCM-T2 Torch height controller
www.purelogic.ru Operating guide СОДЕРЖАНИЕ: 1. General information... 2 2. Scope of delivery... 3 3. Specifications... 3 4. The differences between T1 and T2... 4 5. Principle of operation... 6 6. Wiring
More informationInternal LVDS Dynamic Backlight Brightness Control
White Paper Ho Nee Shen Senior Software Engineer Intel Corporation Chan Swee Tat System Engineer Intel Corporation Internal LVDS Dynamic Backlight Brightness Control A platform and software design using
More informationVS-0202 VS-0204. User Manual
User Manual VS-0202 VS-0204 Read this guide thoroughly and follow the installation and operation procedures carefully in order to prevent any damage to the units and/or any devices that connect to them.
More informationChapter I Model801, Model802 Functions and Features
Chapter I Model801, Model802 Functions and Features 1. Completely Compatible with the Seventh Generation Control System The eighth generation is developed based on the seventh. Compared with the seventh,
More informationIntroduction. Page 2 / 9
Installation Manual English, US, version 1.1, as of November 13th, 2015 2015 Smappee NV. All rights reserved. Specifications are subject to change without notice. All product names are trademarks of their
More informationUSB Plus+ RFID Reader Setup Guide
875-0042-03 RevA USB Plus+ RFID Reader Setup Guide 1 Government Limited Rights Notice: All documentation and manuals were developed at private expense and no part of it was developed using Government funds.
More informationUniversal Serial Bus (USB) to DH-485 Interface Converter
Installation Instructions Universal Serial Bus (USB) to DH-485 Interface Converter Catalog Number 1747-UIC Contents Overview..................................................3 Computer and Operating System
More informationN600 WiFi USB Adapter
Model WNDA3100v3 User Manual December 2014 202-11470-01 350 East Plumeria Drive San Jose, CA 95134 USA Support Thank you for selecting NETGEAR products. After installing your device, locate the serial
More information