Datasheet Giganetix Board Camera GC2041C-BL

Transcription

1 Datasheet Giganetix Board Camera SMARTEK Vision Business Class Products at Economy Prices SMARTEK Vision s board level version of the Giganetix compact camera series provides you with the freedom to create successful integration into OEM devices and applications where space is limited. This flexibility is achieved by the use of a remote sensor head with adaptable cable lengths of up to 150mm, a one-piece motherboard and Power over Ethernet (PoE). The remote sensor head and motherboard, which includes the processing and data interface electronics, is the same platform as our well-established Giganetix Industrial Camera Series. A flexible customization service for the mechanics, functionality, and the integrated I/O-extension port provides our customers with a quick and cost effective solution to meet individual requirements. The Giganetix camera series offers best-in-class image quality with minimal noise and a comprehensive feature set. The range of image sensor options available include: 4 Aptina CMOS sensors, 10 Sony CCD sensors and 3 Truesense Imaging CCD sensors, ensuring that we can offer the right camera model for almost every Machine Vision application. Ultra low trigger latency of 2µs on 2 input and 2 output ports allows for optimum synchronization of camera arrays with LED strobe illumination. Throughout the design of these cameras, utilization of industrial standards such as: C-mount, Hirose-connector and RJ45 connectors for CAT5e or CAT6 cables allows for significant cost reduction for your machine vision system, without any compromise in quality. Key Benefits & Features: Remote camera head with standard C-Mount lens adapter (further types e.g. M12 on request) Single mainboard with 65x43mm footprint Extension port for further connectivity (OEM) Power over Ethernet (PoE) Wide selection of CCD / CMOS sensors from Aptina, Sony and Truesense Imaging Partial scan, Area of Interest (AOI), binning Minimal thermal noise, low power consumption Fully GigE Vision and Gen<i>Cam compliant hardware and software Comprehensive SDK for Windows and Linux Ethernet cables allow for operating distances up to 100m Plug & Play, attach the camera to your Ethernet network and start working 2 input and 2 output channels, opto-isolated 3 years warranty SMARTEK d.o.o. 2015, information is subject to change without prior notice, Version from

2 Specifications: GC2041-BL Model Sensor type Sensor technology Shutter type Resolution Frame rate (full resolution) Aptina MT9T031 CMOS Rolling Shutter 2048x1536 (3.1 MP) 12 fps Sensor size 1/2" Pixel size 3.2x3.2 µm Exposure time Analog gain ADC bitdepth 53 µs - 10 s db 8 bits Power consumption (PoE) ca. 2.2 W (3.0 W) All cameras are also available in a compact 35x35x48mm or a 90 angled enclosure. We offer customizations for all our camera models also for low quantities. Spectral sensitivity: (Color):

3 Further Specifications: Video interface: Gigabit Ethernet 1000BASE-T Video format: Mono 8/16, Bayer 8/16 Synchronization: Via external trigger; single shot, multi shot or free run Exposure control: Freely programmable via GigE Vision interface Optical filters: IR-cut default for color models Digital input: 2 input channels, opto-isolated Digital output: 2 output channels, opto-isolated IO extension: Extension port for further connectivity (OEM) Sensor cable: 40mm standard length, up to 150mm on request Power supply: 10-24V DC (via GPIO) or Power over Ethernet (PoE) Mount: C-Mount, M12 and furthers on request Operating temp.: from 0 C/+32 F up to +45 C/+113 F (environment; higher temperature with heat sink) Storing temp.: from -30 C/-22 F up to +60 C/+140 F (board temperature) Humidity: from 20% up to 80%, relative, non-condensing Dimensions: 65x43x19mm (mainboard) / 35x35x26mm (sensor head) Weight: ca. 60g Software Environment: Firmware update: Client software: Driver: SDK: Interoperability: via Ethernet SMARTEK Vision GigEVisionClient Camera stream display and image capturing, intuitive graphical user interface for the adjustment of all available settings, GigE Vision and Gen<i>Cam compliant GigE Vision compliant Giganetix IP filter driver for all Windows and Linux platforms SMARTEK Vision GigEVisionSDK with documented API Validated with Halcon, VisionPro, Matrox Imaging Library, LabView, Scorpion Vision and others Ordering Information: GC<XXX><N><X><Y>-BL-<M>-<L>-<G> IRC with IR-cut filter (default for color models) CLG clear glass (default for monochrome models) L cable length to sensor board (mm) C C-Mount M12 M12-Mount NM no mount M monochrome C color X sensor without cover glass (optional)* Model index Horizontal resolution without last digit * *only available for particular CCD image sensors on request

4 Accessories (sold separately): Our team assists you in finding the optimal accessories (lenses etc.) for your camera. Cabling: Molex I/O cables with flying leads Ethernet CAT5e/6 with straight RJ45 plugs and screw lock All cables are also available with angled plugs and in chain / hi-flex versions Strobe controller: SMARTEK Vision IP Strobe Controller with 1, 2 and 4 channels (up to 200V@20A) General Purpose IO Interface (GPIO): Type: Molex Picoblade ( ) 10 Pin V DC input 5 Output Input Power GND 6 Output 1-10 Input 2-3 Output Input Output 2-8 Input 1 - Dimensions in mm / [inch]: Sensor Head C-Mount: 35x35x26.2mm

5 Dimensions in mm / [inch]: Mainboard: 65x43x19mm Sensor Head Interface Power and I/O Interface Extension Port (OEM)