Hydraulic Pumps TABLE OF CONTENTS
|
|
|
- Moses Hood
- 9 years ago
- Views:
Transcription
1 Hydraulic Pumps TABLE OF CONTENTS HYDRAULIC PUMPS.009 to 9.85 in 3 /rev. The range includes F0 and F1 all aluminium gear pumps, as well as our standard F10, F20 and available are all cast iron HI/LO pumps with 14 displacement combinations, ideal for log-splitter applications, as well as side and rear ports PTO pumps for 540 and 1000 rpm applications. (All Aluminium Mini Hydraulic ) (All Aluminium Hydraulic ) (SAE AA Mount - Aluminium & Cast Iron Hydraulic ) (SAE A Mount - Aluminium & Cast Iron Hydraulic ) (SAE B Mount - Aluminium & Cast Iron Hydraulic ) (Built to Suit) (Hi-Lo Hydraulic ) (PTO Driven ) * Dynamic pumps are interchangeable with many leading domestic and European manufacturers
2 HYDRAULIC MOTORS HYDRAULIC PUMPS GAUGES & ACCESSORIES FLUID COMPONENTS, INC. GP-F0 is an all aluminium construction, high pressure mini hydraulic gear pump with 12 displacement sizes from in 3 /rev. ( cm 3 /rev). The drawing and porting is any combination of rear, front or Flow Rate (gpm) = (in 3 Pressure Speed rpm Weight in (cm Rated Max Rated Max Lbs. GP-F (0.16) GP-F (0.25) GP-F (0.38) GP-F (0.50) GP-F0-070* (0.70) GP-F (0.75) L L1 GP-F GP-F GP-F GP-F F0 016/025/038/050/ 070/075/084/100/ 125/150/175/200 GP-F0 Available by Special Order Only INLET PRESSURE: psi absolute T = Flat Tang L L1 GP-F GP-F GP-F GP-F Pressure Speed rpm Weight in (cm Rated Max Rated Max Lbs. GP-F0-084* (0.84) GP-F (1.00) GP-F (1.25) GP-F (1.50) GP-F (1.75) GP-F (2.00) Ordering Example: F0 T L L1 GP-F GP-F GP-F GP-F Port Options Options Omit = Standard (front & back) 1 = 1 /4 NPT Side 2 = Bidirectional 3 = Free running
3 GP-F1 is an all aluminium construction, high pressure hydraulic gear pump with 15 displacement sizes from 0.05 to 0.48 in 3 /rev. (0.8 to 8.0 cm 3 /rev). The standard and porting is any combination of rear, front or side as GP-F1 Available by Special Order Only INLET PRESSURE: psi absolute GAUGES & ACCESSORIES Pressure Speed rpm Weight in (cm Rated Max Rated Max lbs GP-F (0.8) GP-F (1.1) GP-F (1.3) GP-F (1.6) GP-F (1.8) GP-F (2.1) GP-F (2.7) GP-F (3.2) Pressure Speed rpm Weight in (cm Rated Max Rated Max lbs GP-F (3.7) GP-F (4.2) GP-F (4.8) GP-F (5.8) GP-F (6.0) GP-F (7.0) GP-F (8.0) Flow Rate (gpm) = (in 3 /rev) X Speed (rpm) / 231 HYDRAULIC PUMPS L L1 GP-F GP-F GP-F GP-F GP-F L L1 GP-F GP-F GP-F GP-F GP-F L L1 GP-F GP-F GP-F GP-F GP-F Ordering Example: F1 T F1 08/11/13/16/18/ 21/27/32/37/42/ 48/58/60/70/80 T = Flat Tang Options Options Omit = Standard (front & back) 1 = 3 /8 NPT Side 3 = Free running
4 HYDRAULIC MOTORS HYDRAULIC PUMPS GAUGES & ACCESSORIES FLUID COMPONENTS, INC. Constructed of an aluminium center section and cast iron end plates, model GP-F10 is a high pressure hydraulic gear pump with 8 displacement sizes from in 3 /rev. ( cm 3 and SAE-6 outlet; and the drive shaft is a 1 /2 diameter straight shaft with 1 /8 key. in (cm Flow Rate (gpm) = (in 3 /rev) X Speed (rpm) / 231 L L1 Pressure psi Speed rpm Rated In Max Out GP-F SAE-8 SAE-6 GP-F SAE-8 SAE-6 GP-F SAE-8 SAE-6 GP-F SAE-8 SAE-6 GP-F SAE-8 SAE-6 GP-F SAE-8 SAE-6 GP-F SAE-8 SAE-6 GP-F SAE-8 SAE-6 GP-F10 Weight Lbs. GP-F (1.3) GP-F (2.0) GP-F (2.7) GP-F (3.4) GP-F (4.1) GP-F (5.1) GP-F (6.1) GP-F (8.0) F10 SAE AA Mount (see chart) 13/20/27/34 41/51/61/80 INLET PRESSURE: psi absolute Ordering Example: F10 P P = 1 /2 dia. Straight ** Additional shaft options available. Please consult factory. Seal kits are available for F10 gear pumps. See page 125 for details
5 Constructed of an aluminium center section and cast iron end plates, model GP-F20 is a high pressure hydraulic gear pump with 11 displacement sizes from in 3 /rev. (4-32 cm 3 /rev). 5 /8 straight shaft with 5/32 key. Additional shaft options are available as outlined in the Ordering Example. GP-F20 INLET PRESSURE: psi absolute GAUGES & ACCESSORIES Pressure Speed rpm Weight in (cm psi Rated Max lbs GP-F (4) GP-F (6) GP-F (8) GP-F (10) GP-F (12) GP-F (14) GP-F (16) GP-F (20) GP-F (25) GP-F (30) GP-F (32) Flow Rate (gpm) = (in 3 /rev) X Speed (rpm) / 231 P L L1 In Out GP-F SAE-12 SAE-10 GP-F SAE-12 SAE-10 GP-F SAE-12 SAE-10 GP-F SAE-12 SAE-10 GP-F SAE-12 SAE-10 GP-F SAE-12 SAE-10 GP-F SAE-12 SAE-10 GP-F SAE-12 SAE-10 GP-F SAE-12 SAE-10 GP-F SAE-16 SAE-12 GP-F SAE-16 SAE-12 P1 S9 S11 HYDRAULIC PUMPS F20 SAE A Mount * Special Order ** Additional shaft options available. Please consult factory. Ordering Example: P (see chart) 04/06/08/10/12 14/16/20/25/30/32 P = 5 /8 dia. Straight P1 = 3 /4 dia. Straight S9 = SAE 9-tooth spline S11* = SAE 11-tooth spline Seal kits are available for F20 gear pumps. See page 125 for details
6 HYDRAULIC MOTORS HYDRAULIC PUMPS GAUGES & ACCESSORIES FLUID COMPONENTS, INC. Constructed of an aluminium center section and cast iron end plates, model GP-F25 is a high pressure hydraulic gear pump with 10 displacement sizes from in 3 /rev (22-89 cm 3 /rev). 7 /8 diameter straight shaft and 1 /4 key. in (cm Flow Rate (gpm) = (in 3 /rev) X Speed (rpm) / 231 L L1 Pressure psi In Speed rpm Rated Max Out GP-F SAE-16 SAE-12 GP-F SAE-16 SAE-12 GP-F SAE-16 SAE-12 GP-F SAE-16 SAE-12 GP-F SAE-16 SAE-12 GP-F SAE-16 SAE-12 GP-F SAE-16 SAE-12 GP-F25-70* SAE-20 SAE-16 GP-F25-78* SAE-20 SAE-16 GP-F25-89* SAE-20 SAE-16 Weight Lbs. GP-F (22) GP-F (26) GP-F (34) GP-F (39) GP-F (43) GP-F (51) GP-F (60) GP-F25-70* 4.27 (70) GP-F25-78* 4.76 (78) GP-F25-89* 5.43 (89) F25 SAE B Mount GP-F25 P (see chart) 22/26/34/39/43/51 60/70*/78*/89* INLET PRESSURE: psi absolute Ordering Example: P ** Additional shaft options available. Please consult factory. P = 7 /8 dia. Straight S13 = 13-tooth Spline S13 Seal kits for F25 gear pumps are available. See page 125 for details
7 Double & Triple Pumps Dynamic gear pump models GP-F10, GP-F20 and GP-F25 are available with features that allow pumps to be stacked to produce double and triple pumps from the base model. Technical data, including displacement sizes, working pressure, rated displacements of 12 and 8 cm 3 /rev (.73 and.48 in 3 /rev) rated at 2000 rpm and 2900 psi with a 9-tooth spline drive shaft and clockwise rotation. INLET PRESSURE: psi absolute Contact Dynamic for installation information can also be produced by special order. Consult factory for details. GAUGES & ACCESSORIES HYDRAULIC PUMPS Ordering Example: / / P F10 = SAE AA Mount F20 = SAE A Mount F25 = SAE B Mount /Stack Stack D = Double T = Triple Pump 1 Size Pump Sizes See pages for displacement options See previous pages for options
8 HYDRAULIC MOTORS HYDRAULIC PUMPS GAUGES & ACCESSORIES FLUID COMPONENTS, INC. GP-CBN is a HI/LO hydraulic gear pump with 12 displacement combinations with maximum pressures of 900 psi for the low pressure pump and 3000 psi for the high pressure pump. The change from LO to HI pressure is automatic with the LO pressure preset from 400 to 900 psi. The HI/LO pump is all cast iron. Applications for HI/LO pumps include log splitters, presses, etc. where rapid movement of the cylinder at low pressure is required prior to automatically switching to the high pressure mode to meet load requirements. Flow at Pressure in psi Speed Weight (rpm) (lbs) (gpm) LO HI LO HI GP-CBN (2.1).385 (6.3) 400/ GP-CBN-085* (3.0).385 (6.3) 400/ GP-CBN (3.6).385 (6.3) 400/ GP-CBN-100* (2.1).537 (8.8) 400/ GP-CBN-105* (3.0).537 (8.8) 400/ GP-CBN (3.6).537 (8.8) 400/ GP-CBN-115* (4.2).537 (8.8) 400/ GP-CBN-120* (2.1).665 (10.9) 400/ GP-CBN-125* (3.0).665 (10.9) 400/ GP-CBN (3.6).665 (10.9) 400/ GP-CBN-135* (4.2).665 (10.9) 400/ GP-CBN (4.2).793 (13.0) 400/ Flow Rate (gpm) = (in 3 /rev) X Speed (rpm) / 231 GP-CBN GP = CBN = HI/LO Nominal Flow 080/085*/090/100* 105*/110/115*/120* 125*/130/135*/160 P = 1 /2 dia. Straight Dimensions L L1 GP-CBN GP-CBN-085* GP-CBN GP-CBN-100* GP-CBN-105* GP-CBN GP-CBN-115* GP-CBN-120* GP-CBN-125* GP-CBN GP-CBN-135* GP-CBN Ordering Example: P ** Additional shaft options available. Please consult factory. Seal kits for CBN gear pumps are available. See page 125 for details
9 GP-CBN is a HI/LO hydraulic gear pump offers maximum pressures of 900 psi for the low pressure pump and 3000 psi for the high pressure pump. The change from LO to HI pressure is automatic with the LO pressure preset from 400 psi to 900 psi. The HI/LO pump is all cast iron. Applications for HI/LO pumps include log splitters, presses, etc. where rapid movement of the cylinder at low pressure is required prior to automatically switching to the high pressure mode to meet load requirements. Flow at Pressure in (psi) Speed Weight (rpm) (lbs) (gpm) LO HI LO HI GP-CBN (7.63) 0.93 (15.26) 400/ GP-CBN (7.63) (22.88) 400/ Flow Rate (gpm) = (in 3 GP-CBN INLET PRESSURE: psi abs. GAUGES & ACCESSORIES HYDRAULIC PUMPS Ordering Example: P GP = CBN = HI/LO ** Additional shaft options available. Please consult factory. Nominal Flow 220 = 22 gpm 280 = 28 gpm Seal kits for CBN gear pumps are available. See page 125 for details. P = 5 /8 dia. Straight
10 HYDRAULIC MOTORS HYDRAULIC PUMPS GAUGES & ACCESSORIES FLUID COMPONENTS, INC. GP-PTO is a Power Take Off gear pump constructed with cast iron end plates and an aluminum center section. It offers 4 displacement sizes from 3.41 to 9.76 in 3 /rev ( cm 3 /rev). Standard drive is 1 3 /8 diameter 6-tooth female spline. Pressure Speed Weight (in (cm (psi) Rated Max (lbs) GP-PTO (56) GP-PTO (90) GP-PTO (125) GP-PTO (160) Flow Rate (gpm) = (in 3 /rev) X Speed (rpm) / 231 GP-PTO A B D E GP-PTO GP-PTO GP-PTO GP-PTO PTO = Power Take Off Ordering Example: PTO A A = Aluminum 3/5/7/9 INLET PRESSURE: psi abs. 6 = 6-tooth Spline 21* = 21-tooth Spline S S = Side *21-tooth Spline option only available on size 3 & 5 pumps by special order - minimum quantities may be required. Seal kits for PTO pumps are available. See page 125 for details
11 GP-PTO is a rear-ported, Power Take Off gear pump constructed with cast iron end plates and an aluminum center section. This pump offers a 9.76 in 3 /rev (160 cm 3 /rev) displacement and 3 /8 diameter 21-tooth female spline. INLET PRESSURE: psi abs. Pressure Speed Weight in cm psi Rated Max Lbs GP-PTO-A-9-21-R Flow Rate (gpm) = (in 3 /rev) X Speed (rpm) / 231 GP-PTO GAUGES & ACCESSORIES HYDRAULIC PUMPS PTO = Power Take Off Ordering Example: PTO A A = Aluminum 9 21 = 21-tooth Spline R R = Rear Seal kits for PTO pumps are available. See page 125 for details
SCP 012-130 ISO. Other advantages: SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics.
SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics. SCP 012-130 ISO covers the entire displacement range 12-130 cmᶟ rev. at a maximum pressure of
Hydraulic Pump/Motor Division Hydraulic Pump/Motor Division
Parker Piston Pumps Otsego Core Competency... Piston Pumps PAVC Series : 4 displacements from 33-100 cc/r, 207 Bar, 3000 RPM PVP Series : 9 displacements from 16-140 cc/r, 250 Bar, 3000 RPM PV Plus : 12
Truck Hydraulics. Series GPA, GP1, F1, F2, T1, VP1, Fixed and Variable Displacement Pumps, Motors and Accessories
Series GPA, GP1, F1, F2, T1, VP1, Fixed and Variable Displacement Pumps, Motors and Accessories Pumps and Motors Conversion factors 1 kg... 2,20 lb 1 N... 0,225 lbf 1 Nm... 0,738 lbf ft 1 bar...14,5 psi
FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
Truck Hydraulics. Series GPA, GP1, F1, F2, T1, VP1, Fixed and Variable Displacement Pumps, Motors and Accessories. parker.com/pmde
Series GPA, GP1, F1, F2, T1, VP1, Fixed and Variable Displacement Pumps, Motors and Accessories parker.com/pmde Pumps and Motors Conversion factors 1 kg... 2.20 lb 1 N... 0.225 lbf 1 Nm... 0.738 lbf ft
Rexroth Hydraulic Pump A10VO Series User Manual
Rexroth Hydraulic Pump A10VO Series User Manual Rexroth Hydraulic pump A10VO Series User Manual Revised 5/1/2009 Page 1 of 12 Functional Purpose This pump is preferred over a fixed displacement (gear)
VHO/VQ Single, Double & Triple Vane Pumps
VHO/VQ Single, Double & Triple Vane Pumps Series Available: 20, 25, 30, 35, 45, 50 For Mobile and Industrial Use Cartridge Kits Available for All Sizes Same Day Shipments www.fluidynefp.com Our People
PVH131/141 Variable Displacement Piston Pump - 11 Design
Service Data Vickers Piston Pumps PVH131/141 Variable Displacement Piston Pump - 11 Design Revised 05/01/97 M-2209-S Maximum Adjustable Stop S Option 913341 Locknut Torque 25-50 N.m. (18-37 lb. ft.) Torque
Series PVP Variable Volume Piston Pumps
Series PVP Variable Volume Piston Pumps Catalog HY28-2662-CD/US Revised June, 212 hpm12-1.p65, lw, jk 1 Notes Series PVP hpm12-1.p65, lw, jk 2 Introduction Series PVP Series Sizes 6-14 Phased Out For Reference
VARIABLE DISPLACEMENT AXIAL PISTON PUMPS. For truck applications
VARIABLE DISPLACEMENT AXIAL PISTON PUMPS For truck applications TVP FEATURES Variable displacement axial piston pumps swash plate design ideally suited for open circuit truck applications. The compact
MONO BLOCK DIRECTIONAL CONTROL VALVE TS1120TSLB
MONO BLOCK DIRECTIONAL CONTROL VALVE TS112TSLB TS TS212TSTSJB P T TS312TSDTSTKJ TS112TSJB FEATURES: O RG PORTS to eliminate leakage. POWER BEYOND CAPABILITY to fit your multi valve circuits. BUILT ANTI-DROP
PVM Piston Pumps Service Manual
PVM Piston Pumps Service Manual PVM018/020 PVM045/050 PVM057/063 PVM074/081 PVM098/106 PVM131/141 Table of Contents Service Parts Pump Description... 3 Basic pump Pump Operation Controls Types Part Identification...
MONO BLOCK DIRECTIONAL CONTROL VALVE TS
SHIPPING: 2332 S 25TH STREET (ZIP 6815) MAILING: P.O. BOX #669 OMAHA, NE 6816 PHONE: (42) 344-4434 FAX: (42) 341-5419 HTTP://WWW.BRAND-HYD.COM MONO BLOCK DIRECTIONAL CONTROL VALVE TS TS312TSDTSTKJB TS2
Delta Power Company 4484 Boeing Drive - Rockford, IL 61109
INDEX Description Page Delta Power Rotary Flow Divider, Positive Displacement (Application Data) 36 P Series, Equal Flow Two Sections 39 P Series, Equal Flow Multi-Sections 40 PM Series, Equal Flow Multi-Sections
FP12 FERRA SERIES HEAVY DUTY GEAR PUMP
FP12 FERR SERIES HEVY DUTY GER PUMP Concentric B Innovation in Hydraulics DESIGNED FOR HEVY DUTY The FERR F12 pump is a rugged two-piece pump available with displacements from 16 to 41 cc/rev and pressures
PRODUCT CARD GEAR PUMPS AND MOTORS ORS GROUP 1 E0.14.0503.02.01 TM GEAR PUMPS AND MOTORS GROUP 1 INDEX Page 1 - GENERAL INDEX Page 2 - Features - Quick guide Page 3 - Features - General - Working conditions
HYDRAULIC MOTORS HYDRAULIC SYSTEMS DIVISION. Outstanding Hydraulic Products, Service and Expertise, Worldwide
HYDRAULIC MOTORS HYDRAULIC SYSTEMS DIVISION Outstanding Hydraulic Products, Service and Expertise, Worldwide Introduction to Haldex Hydraulic Motor Capability Haldex offers one of the widest selections
Series PAVC Variable Displacement Piston Pumps zp01. Catalog HY28-2662-CD/US
Series PAVC Variable Displacement Piston Pumps zp1 Catalog HY28-2662-CD/US 1 Introduction Series PAVC Quick Reference Data Chart Pump Model Displacement CM 3 /REV (IN 3 /REV) Pump Delivery *Approx. Noise
ROTARY GEAR FLOW DIVIDERS
ROTARY GEAR FLOW DIVIDERS Concentric AB Innovation + Technology = Sustainability GC and D Series Rotary Gear Flow Dividers Intensifier - Combiner (European and U.S. Versions) Field-proven Concentric Hydraulic
HYDRAULIC MOTORS Concentric AB
HYDRAULIC MOTORS Concentric A Innovation in Hydraulics Introduction to Concentric Hydraulic Motor Capability Concentric offers one of the widest selections of gear pumps and hydraulic motors in the industry.
P2/P3 Series Piston Pumps Variable Displacement zp09. Catalog HY28-2662-CD/US
P2/P3 Series Piston Pumps Variable Displacement zp9 Catalog HY28-2662-CD/US A3 Series P2/P3 A4 General Information General Information Series P2/P3 P2 Series The newly developed variable displacement piston
PVQ 40-B2/M2 * *** - ** * * - 10 C** *** *** * - 10/11/12/20 PVQ 45-B2/M2 * *** - ** * * - 10 C**
Service Data Vickers Piston Pumps Low Noise Industrial Piston Pump PVQ 40-B2/M2 * *** - ** * * - 10 C** *** *** * - 10/11/12/20 PVQ 45-B2/M2 * *** - ** * * - 10 C** *** *** * - 10/11/12/20 C, CM Compensator
Variable Displacement Pump AA10VSO
Variable Displacement Pump AA10VSO Series 31, Industrial Model, for Open Circuits Axial piston, swashplate design Brueninghaus Hydromatik Sizes 28...140 Nominal pressure 4000 psi Peak pressure 5100 psi
Series TMM Axial Piston Motor. Technical Information
Series TMM Axial Piston Motor Technical Information General Description GENERAL DESCRIPTION These motors are designed primarily to be combined with other products in closed circuit systems to transfer
Vickers Vane Pumps Single and Double Vane Pumps. Model Series V10, V20, V2010, and V2020 for Industrial Equipment
Vickers Vane Pumps Single and Double Vane Pumps Model Series V10, V20, V2010, and V2020 for Industrial Equipment The Power of One Eaton HANSEN GROMELLE There s a certain energy at Eaton. It s the power
Uniquely designed and engineered specifically for the pulp and paper industry.
Universal SPU2 Series Uniquely designed and engineered specifically for the pulp and paper industry. For more than half a century, Waukesha Cherry-Burrell has been a leader in the design, manufacturing
PRODUCT CARD GEAR PUMPS AND MOTORS ORS GROUP 3 E0.17.0703.02.01 TM GEAR PUMPS AND MOTORS INDEX Page 1 - GENERAL INDEX Page 2 - Features - Quick guide Page 3 - Features - General - Working conditions -
Truck Hydraulics. F1 F2 T1 VP1 PTO info Accessories. Fixed and Variable Displacement Pumps, Motors and Accessories. Catalogue HY17-8200/UK March 2004
Fixed and Variable Displacement Pumps, Motors and Accessories Catalogue HY17-8200/UK March 2004 F1 F2 T1 VP1 PTO info Accessories Conversion factors 1 kg 2.20 lb 1 N 0.225 lbf 1 Nm 0.738 lbf ft 1 bar 14.5
HYDROSTATIC TEST PUMPS
HYDROSTATIC TEST PUMPS MANUAL HYDROSTATIC TEST PUMPS Ideal for testing residential water lines. Also for pressure testing small pressure tanks, sprinkler, boiler and solar systems. Lightweight and easy
LOADER DIRECTIONAL CONTROL VALVE LV LV22RFSTKLB SHOWN T
LOADER DIRECTIONAL CONTROL VALVE LV LV22RFSTKLB SHOWN T LV22RFSTKLB A2 B2 A1 B1 P LV22RFSTKABW FEATURES: O RING PORTS to eliminate leakage. FOURTH POSITION REGEN allows cylinder to rapidly extend. POWER
Goulds Water Technology
APPLICATIONS Specifically designed for: Homes Farms Cottages Booster service SPECIFICATIONS Pump: Pipe connections: 1¼" NPT suction, 1" NPT discharge, 1" NPT drive (pressure) Pressure switch: AS4 preset
Fixed displacement vane pumps
Fixed displacement vane pumps RE 1335/1.5 Replaces: 11.2 1/22 Types PVV and PVQ Nominal sizes 18 to 193 Series 1X Maximum operating pressure 21 bar Maximum displacement 18 to 193 cm 3 Doppelpumpe_d_ Double
Hydraulic Motor/Pump. Series F11/F12 Fixed Displacement. parker.com/pmde
Hydraulic Motor/Pump Series F11/F12 Fixed Displacement parker.com/pmde Series F11/F12 Torque (M) M = D x p x η hm 63 [Nm] Conversion factors 1 kg... 2.20 lb 1 N... 0.225 lbf 1 Nm... 0.738 lbf ft 1 bar...14.5
Index 11.1. Page. Pumping Systems...11.2-11.4 Intensifiers...11.5 Gas Boosters...11.6-11.7 High Pressure Generators...11.8-11.9
Pumping Systems, Intensifiers, Gas Boosters and High Pressure Generators High Pressure Equipment Company produces a number of components and systems for general industrial, elevated pressure applications.
NORMAN FILTER COMPANY PRODUCT OVERVIEW
NORMAN FILTER COMPANY PRODUCT OVERVIEW LEADING THE WAY IN QUALITY FILTRATION WWW.NORMANFILTERS.COM FILTER ELEMENT INTERCHANGE Tee-Type Filter 4500, 14500, 34500, and 54500 Series Mini Tee-Type Filter 4100
RPT SIGMA PUMPY HRANICE ROTARY LOBE DISPLACEMENT PUMPS 426 2.98 23.01
SIGMA PUMPY HRANICE ROTARY LOBE DISPLACEMENT PUMPS RPT SIGMA PUMPY HRANICE, s.r.o. Tovární 605, 753 01 Hranice, Czech Republic tel.: +4 581 661 111, fax: +4 581 602 587 Email: [email protected] 426
Vane Pump & Motor Design Guide
Vickers Service Guide Vane Pump & Motor Design Guide For Mobile Equipment Revised 8/98 353 Introduction Over the past twenty years, the application of hydraulics in agricultural, construction and materials
Unit 24: Applications of Pneumatics and Hydraulics
Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 3 HYDRAULIC AND PNEUMATIC MOTORS The material needed for outcome 2 is very extensive
High Torque Vane Motors MV015, MV037, MV057, MV125
High Torque Vane Motors MV015, MV037, MV057, MV125 2 Unique vane crossing vane design provides maximum versatility This motor is created around the patented vane crossing vane design, a leading-edge concept
KNC Model 3666 Automatic Pressure Calibration System
KNC Model 3666 Automatic Pressure Calibration System Product Description The Model 3666 Automatic Pressure Calibration (APC) System by King Nutronics Corporation is a portable secondary standards laboratory
Q Series Piston Pumps Variable Displacement, Quiet Series for Industrial Applications
Q Series Piston Pumps Variable Displacement, Quiet Series for Industrial Applications Technical Catalog PVQ10 PVQ13 PVQ20 PVQ25 PVQ32 PVQ40 PVQ45 Table of Contents Introduction......................................................................................................
Dual Path Mobile Pump
Dual Path Mobile Pump Technical Manual 350 Series 350 Series Mobile Pump Introduction Single Assembly* Dual Path Assembly The 350 Series mobile pump is an advanced, closed circuit, servo controlled, axial
TC 170 & TC 170 PD TRANSFER CASE
Automotive Corporation TC 170 & TC 170 PD TRANSFER CASE PARTS MANUAL Fabco Automotive Corporation, Livermore, CA Ph:(925) 454-9500 Fax:(925) 454-9501 1-(800) 967-8838 www.fabcoautomotive.com VII. PARTS
W900 SERIES HYDRAULIC PUMP
W900 SERIES HYDRAULIC PUMP HYDRAULIC SYSTEMS DIVISION Outstanding Hydraulic Products, Service and Expertise, Worldwide W900 Hydraulic Gear Pump. PRESSURE (P1) 276 BAR (4000 PSI) (P2) 300 BAR (4400 PSI).
Flows to 18 GPM. Pressure to 100 PSI
Markets Agriculture-fertilizers, pesticides Automotive-coolants, lubricants Book Mfg-adhesives, glue Construction & Mining-lubricants, fuels, coolants Filtration System Pumps-portable, stationary Food
Vickers PVM Piston Pumps
Vickers PVM Piston Pumps 18-141cc 3 (1.1-8.6in 3 ) M-Series Industrial Variable Displacement M-Series Mobile Variable Displacement Table of Contents M Series Variable Displacement Piston Pumps Principles
Instruction Manual. A50099 Calibration Device. www.band-it-idex.com TIE-DEX CALIBRATION DEVICE A50099
Instruction Manual TIE-DEX CALIBRATION DEVICE Introduction: The Tie-Dex is to be used with the A30199, A40199, A35199, and A35599 Tools using BAND-IT Tie-Dex ties only. Table of Contents: 1. Introduction
C18 ACERT Fire Pump Tier 3 448 bkw/600 bhp @ 1750 rpm
CATERPILLAR ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...145.0 mm (5.71 in) Stroke...183.0 mm (7.2 in) Displacement... 18.1 L (1,104.53 in3) Aspiration...Turbocharged Aftercooled Compression
Hydraulic Flow Control Valves
Webtec Products Limited Hydraulic Flow Control Valves Quality Hydraulic Components from the Webtec Range CONTENTS DESCRIPTION PAGE No. ILFC Series Fixed Flow Pressure Compensated Control Valve 1 VFC Series
1 Air-to-Air AfterCooling. 2 Engine Only. Capacity will vary with radiator size and use. of cab heater.
Diesel Truck Engine 3126B 175-330 hp 420-860 @ 1440 rpm Peak CATERPILLAR ENGINE SPECIFICATIONS 6-Cylinder, 4-Stroke-Cycle Diesel Bore in (mm)... 4.33 (110) Stroke in (mm)... 5.0 (127) Displacement cu in
Table of Contents. M Series Variable Displacement Piston Pumps
Table of Contents M Series Variable Displacement Piston Pumps Introduction.... 3 Hydraulic System Design Calculations.... 4 Model Code Selection.... 5 Model Code Options.... 6 Specifications and Performance...
Table of Contents. Overview 1. Pump Disassembly 2. Control Disassembly / Reassembly 7. Pump Reassembly 13. Adjustment Procedures DR Control 19
Table of Contents Overview 1 Pump Disassembly 2 Control Disassembly / Reassembly 7 Pump Reassembly 13 Adjustment Procedures DR Control 19 Adjustment Procedures DRG Control 20 Adjustment Procedures DFR
Oildyne. 165 Series Hydraulic Power Units. Pressures to 241 bar (3500 psi) Flows to 5.4 lpm (1.4 gpm)
Oildyne Hydraulic Power Units Pressures to 241 bar (3500 psi) Flows to 5.4 lpm (1.4 gpm) 11 Power Unit Features We are pleased to introduce our new power units. The power units let you put more power where
220 Series Piston Pump Typical Applications Features and Benefits
Introduction 220 Series Piston Pump Eaton s new 220 Series piston pump signifies a step change in the generation of hydraulic power. Utilizing the latest developments in hydraulic pump technology, the
USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI 53072 U.S.A. Tel: 262-691-2222 FAX: 262-691-0312 E-mail: sales@dynexhydraulics.
SPECIFICATIONS PF1000 Series Fixed Displacement Pumps Also refer to "Checkball Pump Installation and Operating Recommendations" Bulletin PSI.CB (dynexpumpinstallation.pdf) CONTACT INFORMATION USA Headquarters
Rickmeier Solutions. Gear pumps for superior Lubrication
Rickmeier Solutions Gear pumps for superior Lubrication P U M P E N T E C H N O L O G I E #1. Introduction Position and significance of Rickmeier products Rickmeier supplies pumps, valves and systems for
MONITOR SECTION INDEX
MONITOR SECTION INDEX Daspit Tool... E2 Daspit Tool - Truck Mount... E3 Daspit Tool - Throw Down Model... E4 Alpha MA-HV4-4 Aluminum Tiller Bar Monitor... E5 Alpha-E Tiller Bar Montior - 3... E6 SharpShooter
SIGMA PUMPY HRANICE CENTRIFUGAL MULTISTAGE HORIZONTAL PUMPS 426 2.98 12.06
SIGMA PUMPY HRANICE CENTRIFUGAL MULTISTAGE HORIZONTAL PUMPS LV SIGMA PUMPY HRANICE, s.r.o. Tovární 605, 753 01 Hranice, Czech Republic tel.: +420 581 661 111, fax: +420 581 602 587 Email: [email protected]
Unit 24: Applications of Pneumatics and Hydraulics
Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 1 HYDRAULIC PUMPS The material needed for outcome 2 is very extensive so there
An SPX Process Equipment Operation. Universal II Industrial Series Rotary Positive Displacement ECP Pumps
An SPX Process Equipment Operation Universal II Industrial Series Rotary Positive Displacement ECP Pumps New levels of performance. Reduced operational and maintenance costs. For more than half a century,
Transfer Pump Selection
Transfer Pump Selection Material Options: TRANSFER PUMPS Aluminum Cast Iron Polypropylene Typical Use: Water Transfer The aluminum construction does not lend itself well to chemical transfer. Options include:
Chief S21M PARTS MANUAL. 2005 Chief Automotive Technologies
Chief SM 00 Chief Automotive Technologies Chief s Limited One-Year Warranty & Liability CHIEF'S LIMITED ONE-YEAR WARRANTY & LIABILITY Chief Automotive Technologies, Inc. warrants for one year from date
Powers Controls TH 192 HC Heating/Cooling Room Thermostat
Powers Controls TH 192 HC Heating/Cooling Room Thermostat Technical Instructions Document No. 155-066P25 TH 192-2 50 60 70 80 70 TH0356R1 60 80 POWERS Description The TH 192 HC thermostats are proportional
! WARNING. Before using product, read and understand instructions.
McDonnell & Miller Installation & Maintenance Instructions MM-600G) Series FS8-W General Purpose Liquid Flow Switch OPERATION This control is an independently mounted water flow sensing device that makes
Radial piston pumps type R and RG
Radial piston pumps type R and RG Operating pressure p max = 700 bar Delivery flow Q max = 91.2 lpm (at 1450 rpm) Geometric displacement V g max = 64.2 cm 3 /rev. 1. General Motor pumps and hydraulic power
OCTOPUS SELECTION & INSTALLATION GUIDE
OCTOPUS SELECTION & INSTALLATION GUIDE 38mm BORE LINEAR ACTUATOR STYLES LAM & LAR A. GENERAL DESCRIPTION: The Octopus hydraulic linear actuator is a simple, efficient and reliable way of driving the rudder
AIR OPERATED OIL PUMPS AND KITS
PM 2 AIR OPERATED OIL PUMPS AND KITS PM 2 Oil pump, pressure ratio : 0 Double acting air operated pumps for transferring lubricants and other non-corrosive fluids. Pump includes bung adapter. New Model
LINDGREN-PITMAN, INC. Super Spool III Installation Instructions
LINDGREN-PITMAN, INC. Super Spool III Installation Instructions LINDGREN-PITMAN, INC. 2615 N.E. 5th Avenue * Pompano Beach, Florida 33064 * U.S.A. (954)943-4243 * (954)943-7877 Fax E-mail: [email protected]
Illustrated Parts List
More time on the road Illustrated s List FRLO-640C-T November 0 Contents How To Use The Illustrated s List... CASE ASSY... 4 COUNTERSHAFT & BRGS(AUX)... COUNTERSHAFT ASSY... 8 ELECTRONIC CONTROL UNIT...
Pure Efficiency. C.C.I.A.A.: N REA. 0195268 Cod. Fiscale e P. IVA: 00483230173 Capitale Sociale versato 100.000,00
Pure Efficiency. The need to significantly reduce the production costs to remain competitive on the global market and the requirement to control and lessen the environmental impact of all activities are
PRESSURE REDUCING CONTROL VALVE
Schematics Throttles to reduce high upstream pressure to constant lower downstream pressure Low Flow By-Pass controls at low flows 4 PRESSURE REDUCING CONTROL VALVE with LOW FLOW BY-PASS FEATURE Main Line
NAGEL ECO 180 FLEXIBLE HONING SYSTEM
NAGEL ECO 180 FLEXIBLE HONING SYSTEM NEW DEVELOPMENT For Small and Medium Production Runs In-process gauging, Roughing and finishing in a single spindle Tel: 734-426-1812 www.nagelusa.com MACHINE HIGHLIGHTS
World Bridge Replacement Parts for EMD 567 and 645 Diesel Engines
40000927-WB REPAIR KIT, WATER PUMP 40005124-WB MAIN & ROD BEARING KIT, 16 CYLINDER 40005125-WB MAIN & ROD BEARING KIT, 20 CYLINDER 40006129-WB PISTON, 645E HTG AND TIN PLATED 40006130-WB PISTON, 645 E3
Flow Control Valves. Note: Also see R04C3 on page DC1. Denotes New Winner s Circle Product Line. Catalog HY15-3502/US
Catalog HY15-352/US Contents Control SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI NEED VALVES J2A2... C8-2... Needle Valve, Cartridge Type...45/12... 42/6... 5-6 NVH81... C8-2... Needle
Operating, Installation, and Maintenance Instructions
ELKHART BRASS MFG. CO., INC. 1302 WEST BEARDSLEY AVENUE P.O. BOX 1127 ELKHART IN 46515 (574) 295-8330 FAX (574) 293-9914 Operating, Installation, and Maintenance Instructions RAM Personal Portable Monitor
1.1 DIMENSIONS AND WEIGHT PAG. 2 1.2 LOAD CENTRE FOR LIFTING PAG. 2 1.3 STORAGE CONDITIONS PAG. 2
TRANSPORT AND INSTALLATION. DIMENSIONS AND WEIGHT PAG.. LOAD CENTRE FOR LIFTING PAG..3 STORAGE CONDITIONS PAG. STARTING. INSTALLATION PAG.. SPACE REQUIREMENTS PAG. 3.3 ELECTRIC CONNECTION PAG. 3 3 DESCRIPTION
TECHNICAL BROCHURE BAQUABII. * Available up to 100 GPM systems. Aquavar ABII VARIABLE SPEED CONSTANT PRESSURE SYSTEMS
TECHNICAL BROCHURE BAQUABII * Available up to 1 GPM systems Aquavar ABII VARIABLE SPEED CONSTANT PRESSURE SYSTEMS FEATURES The AB2 variable speed pump controller and complete booster package kits, provide
Design and Modeling of Fluid Power Systems ME 597/ABE 591 Lecture 5
Systems ME 597/ABE 591 Lecture 5 Dr. Monika Ivantysynova MAHA Professor Fluid Power Systems MAHA Fluid Power Research Center Purdue University Displacement Machines Study different design principles and
Vickers. Piston Pumps
Vickers Piston Pumps xial Piston Pumps Fixed and Variable Displacement PF, PF, PF PV /6, PV /, PV /9, PV and PV 9 to SE PV /6, PV /, PV /9 to DIN/ISO 39, Part G-379 Contents asic characteristicts..........................................................................................3
Catalog HY15-3501/US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI
Bodies & Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI KSWA3... SW-3... Ball sert Type...9./2.... 42/6... 3 K2A... 3Z... Poppet sert Type...38/1... 3/... 4 CS41B... C4-3...
Series 40 Axial Piston Motors. Technical Information
Series 40 Axial Piston Motors Technical Information Revisions Revisions Table of Revisions Date Page Changed Rev. April 2011 34, 36 correct system pressure gauge port 7/16-20 FE August 2010 last new back
N/NH Truck-mounted fire pump series
N/NH Truck-mounted fire pump series Normal pressure pump type N Combined normal- and high-pressure fire pump type NH Certified according to EN 1028 and UL classified Rosenbauer - N/NH Truck-mounted fire
ISO 9001 Certified Manufacturing Facility SPECIFICATIONS
TS-250 Rev. 0-00-12-07 Refined Fuels PD Meters Size 2 Type 4-MT & 4D-MT 2 PETROLEUM AND LP-GAS TANK TRUCK METERS 2 4-MT with Air Release, Strainer, Printing Register and Preset Valve 2 4D-MT with Vapor
45 URAI DSL 816-741-0282. Roots. Quick Specs. Also Available in: Part Number T30353020
45 URAI DSL Part Number T30353020 Detachable steel mounting feet Rigid one piece cast iron casing Connections in standard pipe sizes Straight, precision machined two lobe impellers Splash oil lubricated
Check Valves Valve locator
Check Valves Valve locator Functional Symbol Flow Typical Model Cavity Rating Pressure Page Check valve, direct L/min (USgpm) bar (psi) FPR/4 Inline () 5 (5) - FPR/8 Inline (8) 5 (5) - FPR/ Inline 45 ()
LOW VOLTAGE D.C. MOTORS & GEARBOX UNITS
LOW D.C. MOTORS & GEARBOX UNITS Printed on 100% recycled paper. 918D SERIES SINGLE RATIO METAL GEARBOX (RE280 MOTOR/RE 280/1 MOTOR) NEW! NEW! NEW! NEW! NEW! WITH 2mm OUTPUT SHAFT (15:1 ONLY) WITH 4mm OUTPUT
300 Series PA Pump and Cooler Assemblies
Type 300 Series PA Sizes 300 thru 370 (Page 1 of 9) 300 Series PA Pump and Cooler Assemblies Pump and Cooler Assemblies with Air/Oil Heat Exchanger When compact gear drives require assistance to dissipate
P900 SERIES PORTABLE HYDROSTATIC TESTER
P900 SERIES PORTABLE HYDROSTATIC TESTER MODELMODEL P900-SM ( STANDARD MODEL) SHOWN IN PHOTO coated square tubular frame on wheels for easy transport. PANEL MOUNTED CONTROLS: 4 dial gauges, pump regulator
Fixed Displacement Gear Pumps
D/H/HD Series Table of Contents Series D/H/HD Description Page No. Introduction... 3 HD Series General Description... 4 D Series Ordering Information.... 5 Technical Information... 6-9 Dimensions... 10-13
ZOP, ZOT SIGMA PUMPY HRANICE GEAR PUMPS 426 1.99 21.04
SIGMA UMY HRANICE GEAR UMS SIGMA UMY HRANICE, s.r.o. Tovární 605, 753 01 Hranice, Czech Republic tel.: +420 581 661 111, fax: +420 581 602 587 Email: [email protected], 426 1.99 21.04 Application In
Quiz On Information Learned From Chapter 1
Quiz On Information Learned From Chapter 1 1. Most hydraulic circuits are designed by: A. mechanical engineers. B. fluid power engineers. C. fluid power distributor salesmen. 2. Atmospheric pressure at
BSM MOTOR DRIVEN CENTRIFUGAL PUMPS
PRINCIPLE OF OPERATION A hydraulically and dynamically balanced impeller with raised vane sections discharges liquid as a result of the centrifugal force developed in rotation. The head developed is entirely
GENERAL VALVE Four-way Diverter Valve
GENERAL VALVE Four-way Diverter Valve VALVES & MEASUREMENT Table of Contents GENERAL VALVE FOUR-WAY DIVERTER VALVE Features and Benefits... 2 Types of Operation Gear Operated... 4 Hydraulic Operated...
Standard Bills of Materials Commonly Ordered Models Only
Standard Bills of Materials Commonly Ordered Models Only Meters Always check www.lcmeter.com for the most current BOM. This document is for reference only. Always use Bill of Material shipped with meter
2011 DC Electropumps Bull. Rotation Ø 15 6,45 3,5 5,7
Ø 5 ±. DC Electropumps Bull,5 Rotation,5 5,7 Email: [email protected] Fax B... Electro pumps Bull series MODEL CODE EPB,5 DC /S5 K, V** Electro Pump Bull series Gear pump displacement (cc/rev (see tables
Waste Oil Handling, Spill Containment & Lighting
58 Waste Oil Handling, Spill Containment & Lighting 372000 SAMOA Mobile Waste Oil Drainer & Extractor Drains and/or extracts waste oil from cars and light commercial vehicles Drain bowl capacity of 20
VIKING HEAVY DUTY PUMPS SERIES 4195 STANDARD CONSTRUCTION
VIKING HEAVY DUTY PUMPS Section 44 Page 44. Issue C FEATURES Pressure Range Temperature Range Viscosity Range 250 PSI ( BAR) for 00 SSU ( cst) and above 50 PSI (0 BAR) for 8 to 00 SSU ( cst to cst) 00
Example. Fluid Power. Circuits
Example Fluid Power Circuits To Enhance Symbol Reading Skills To Work On Circuit Reading Skills With Answers HI LO Pump Circuit 18 A1 B1 17 16 15 13 Set 14 2,000 PSI PG2 Set 500 PSI 12 11 7 8 10 PG1 9