3cm layer of gravel. Outdoor18mm thickness. Direct laying on grass

Transcription

1

2 Create idyllic and inspiring outdoor spaces RAK Ceramics extra thick outdoor tiles collection allows you to add a touch of style and class when personalising your outdoor spaces. Highly durable these 18mm thick porcelain tiles are easy to install and clean. With a wide range of appealing designs to choose from including urban concrete, wood or natural stone, the tile series is perfect for terraces, balconies, outdoor paving, patios, gardens or compound pathways. With strong technical characteristics including high breaking strength, resistance to wear and tear and thermal shock as well as the ability to cope with heavy footfall, our outdoor series is perfect for use in both residential and commercial areas. In addition to standard application areas, with specialised installation, the tiles can also be used for vehicle resistant paving in industrial and commercial areas. Also suitable for use in garages and for creating ramps.

3 Application Methods Grass Outdoor18mm thickness 3cm layer of gravel Direct laying on grass DRY APPLICATION (DIRECT LAYING) - ON GRASS Create paths or decorations on grass in both private or public gardens. RAK Ceramics outdoor tiles collection blends well with natural surroundings and ensures adequate drainage. The tiles allow for: Fast Installation Easy to remove and reposition Save on skilled labour cost Resistant to chemicals, water, fire and natural elements Substrate Preparation Place the tiles at regular intervals and decide the layout. Mark off the edge of each tile with a spade. Remove the tile and dig the turf to a depth of 6-5cm within the marked area. Surface Levelling Add a layer of at least 3cm of gravel (using at least 0.5cm particle gravel) Layout Position the tiles at least 1cm below the surface of the ground and use a rubber hammer to level. Joints Leave gaps between the tiles to suit your desired appearance.

4 Application Methods Outdoor18mm thickness Sand Direct laying on sand DRY APPLICATION (DIRECT LAYING) - ON SAND Laying tiles onto sand is ideal for creating walkways in gardens or beach resorts. Be sure to use light colours so that the tile remains less hot during summer months. The tiles allow for: Fast Installation Easy to remove and reposition depending on seasons or personal mood Substrate Preparation Create a layer of levelled sand Surface Levelling Lay the tiles onto the sand and ensure flatness. Use a rubber hammer to level the tiles if necessary. Layout Arrange the tiles in a suitable layout according to personal preference. Joints Leave gaps between each tile to suit your desired appearance.

5 Application Methods cm gravel Outdoor18mm thickness Non - woven fabric Direct laying on gravel DRY APPLICATION (DIRECT LAYING) - ON GRAVEL Laying tiles onto sand is ideal for creating walkways in gardens or beach resorts. Be sure to use light colours so that the tile remains less hot during summer months. The tiles allow for: Fast Installation Easy to remove and reposition depending on seasons or personal mood Substrate Preparation Create a layer of levelled sand Surface Levelling Lay the tiles onto the sand and ensure flatness. Use a rubber hammer to level the tiles if necessary. Layout Arrange the tiles in a suitable layout according to personal preference. Joints Leave gaps between each tile to suit your desired appearance.

6 Application Methods WET application (adhesive LAYING) Traditional laying on concrete screed is ideal for areas that have dynamic and concentrated loads such as parking, garages, yards or compound walkways. Due to their versatility, 18mm thickness tiles can be used on both pedestrian and vehicle areas simultaneously to ensure a seamless look. Substrate Preparation Create a concrete substrate layer followed by a layer of gravel. Add a levelling layer of concrete of suitable thickness. Surface Levelling Add a reinforcing screed of suitable depth and industrial type. Ideally the screed should be 10-8cm thick with a welded steel reinforcing grid laid about halfway through the layer. Layout Install the tiles using an outdoor adhesive and the double coating method. Joints Tiles should be laid with at least 5mm open joints. Structural joints can also be used.

7 BRYCE P ARTICLE CODE SIZE (CM) Bryce Anthracite A06GZBYC-AN0.M2H3R 60X60 Bryce Gold A06GZBYC-GLD.M2H3R 60X60 Bryce White A06GZBYC-WH0.M2H3R 60X60 60 x 60 cm THICKNESS 18 mm. Bryce Anthracite Bryce Gold Bryce White

8 CORE STONE P ARTICLE CODE SIZE (CM) Core Stone Beige A06GZCES-BE0.M0H3R 60X60 Core Stone Brown A06GZCES-BR0.M0H3R 60X60 Core Stone Grey A06GZCES-GY0.M0H3R 60X60 60 x 60 cm THICKNESS 18 mm. Core Stone Beige Core Stone Brown Core Stone Grey

9 FRENCH VANILLA P ARTICLE CODE SIZE (CM) French Vanilla Anthracite A06GZFRE-AN0.M0H3R 60X60 French Vanilla Beige A06GZFRE-BE0.M0H3R 60X60 French Vanilla Grey A06GZFRE-GY0.M0H3R 60X60 60 x 60 cm THICKNESS 18 mm. French Vanilla Beige French Vanilla Grey French Vanilla Anthracite

10 Sheer stone P ARTICLE CODE SIZE (CM) Sheer Stone Anthracite A06GZSHR-AN0.M0H3R 60X60 Sheer Stone White A06GZSHR-WH0.M0H3R 60X60 60 x 60 cm THICKNESS 18 mm. Sheer Stone White Sheer Stone Anthracite

11 SURFACE P 60 x 60 cm THICKNESS 18 mm.

12 SURFACE P ARTICLE CODE SIZE (CM) Surface Cool Grey A06GZSUR-CGY.M0H3R 60X60 Surface Charcoal A06GZSUR-CBK.M0H3R 60X60 Surface Mid Grey A06GZSUR-MGY.M0H3R 60X60 Surface Night A06GZSUR-NT0.M0H3R 60X60 Surface Copper A06GZSUR-CP0.M0H3R 60X60 Surface Sand A06GZSUR-SN0.M0H3R 60X60 Surface Ash A06GZSUR-AS0.M0H3R 60X60 Surface Cool Grey Surface Mid Grey Lapato Surface Charcoal Lapato Surface Night Surface Sand Lapato Surface Copper Lapato Surface Ash

13 ASSORTED COLLECTION P ARTICLE CODE SIZE (CM) Campo Emperador Beige A06GZCAE-BE0.M0H3R 60X60 Sun Stone Anthracite A06GZSTN-AN0.M2H3R 60X60 Wallnut Wood A06GZWAL-WD0.M2H3R 60X60 60 x 60 cm THICKNESS 18 mm. Campo Emperador Beige Sun Stone Anthracite Wallnut Wood

14 TECHNICAL CHARACTERISTICS Test Description Test Descrizione Description de l essai Test Ergebnis Standard Test Method Metodo di prova standard Méthode d essai standard Standard Test Method International Standard ISO 13006:1998 (E) Standard internazionale ISO 13006:1998 (E) La Norme internationale ISO 13006:1998 (E) Internationaler Standard ISO 13006:1998 (E) RAK Ceramics Specifications RAK Ceramics Specifiche RAK Ceramics Spécifications RAK Ceramics Spezifikationens Length & Width lunghezza e larghezza Longueur et Largeur Länge und Breite BS EN ISO /- 0.6% +/- 0.3% Thickness Spessore Epaisseur Stärke BS EN ISO /- 5.0% +/- 5.0% Rectangular Squareness Rettangolare Ortogonalità Perpendicularité Rechtwinkligkeit BS EN ISO /- 0.6% +/- 0.4% 90º Straightness of sides Rettilineità dei lati Equerrage Kantengeradheit BS EN ISO /- 0.5% +/- 0.4% Surface Flatness Planarità Planéité Ebenflächigkeit BS EN ISO /- 0.5% +/- 0.4% Water Absorption Assorbimento di acqua Adsorption d eau Wasseraufnahme BS EN ISO <=0.5% <=0.4% Modulus of Rupture Modulo di rottura Module de rupture Biegefestigkeit BS EN ISO > = 35 > = 40 Kg Breaking Strength Resistenza alla rottura Solidité Bruchbeständigkeit BS EN ISO > = 1300 N > = 1500 N Resistance to Surface Abrasion Resistenza all abrasione superficiale Résistance à l abrasion Tiefenverschleißbeständigkeit Linear Thermal Expansion Dilatazione termica lineare Coefficient de dilatation thermique Linearer Wärmeausdehnungskoeffizient BS EN ISO BS EN ISO Manufacturer to state Abrasion class Produttore di stato Classe di abrasione Fabricant d Etat à l abrasion de classe Hersteller anzugeben Abriebklassen <=9 x 10-6 o C -1 PEI Class 2-5 <=7 x 10-6 o C -1 Resistance to Thermal Shock Resistenza agli sbalzi termici Résistance aux chocs thermiques Bruchbeständigkeit BS EN ISO No visible defect Nessun difetto visibile Aucun défaut visible Keine sichtbaren Defekt No visible defect Nessun difetto visibile Aucun défaut visible Keine sichtbaren Defekt Crazing Resistance Resistenza al cavillo Résistance aux craquelures Haarrissbeständigkeit BS EN ISO No crazing Nessun cavillo Aucun fendillement Keine Brüche No crazing Nessun cavillo Aucun fendillement Keine Brüche Frost Resistance Resistenza al gelo Résistance au gel Frostbeständigkeit BS EN ISO No visible damage nessun danno visibil aucun dommage visible keine sichtbaren Schäden No visible damage nessun danno visibil aucun dommage visible keine sichtbaren Schäden Resistance to chemicals Resistenza ai prodotti chimici Résistance chimique Chemikalienbeständigkeit BS EN ISO No visible defect Nessun difetto visibile Aucun défaut visible Keine sichtbaren Defekt No visible defect Nessun difetto visibile Aucun défaut visible Keine sichtbaren Defekt Resistance to Stains Resistenza alle macchie Résistance aux tâches Fleckensicherheit BS EN ISO Manufacturer to state class Produttore di Stato di classe Fabricant d Etat de classe Hersteller anzugeben Klasse Stain removed Min. class 4 Antimacchia min. classe 4 Détachage Min. classe 4 Fleckentfernung Min. Klasse 4 Color Resistance to UV light Resistenza dei colori alla luce UV Résistance de la couleur à la lumière UV Farbbeständigkeit gegen UV-Licht DIN No change in color Nessun cambiamento di colore Aucun changement de couleur Keine Änderung der Farbe No change in color Nessun cambiamento di colore Aucun changement de couleur Keine Änderung der Farbe Note NOTA NOTE HINWEIS Shade variation across the batches is inherent to the manufacturing process and the pre-laying colour comparison is recommended. Variazioni nelle sfumature di colore tra un lotto e l altro fanno parte del processo di produzione, per cui raccomandiamo un confronto del colore prima della posa. Une variation de nuance à travers des lots est inhérente au processus de fabrication, il est donc recommandé de préétablir la comparaison des couleurs. Farbabweichungen zwischen Brandfarben sind auf den Herstellungsprozess zurückzuführen. Daher wird empfohlen die Farben vor der Verlegung zu vergleichen.

15