OIL & GAS PRODUCT RANGE

Transcription

1 OIL & GAS PRODUCT RANGE

2

3 Projected towards contuous improvement and coitted to meetg customer needs and expectations an creasgly complex dustrial environment, Alfagoa is servg the oil dustry through its network of production sites, branches and assembly centres, spanng 5 contents. Alfagoa offers an extensive range of s, fittgs and equipment for the on shore and off shore busess. With cuttg edge technology and state of the art R&D, a wide range of solutions are provided for Floatg Roof Tank dra applications, Rig Supply, Dock, On Shore, Moorg and OCIMF Off Shore s. Together with a comprehensive range of Industrial and Hydraulic Hose and Fittg, Alfagoa prograe cludes a complete le of Rotary Drillg, Vibrator, Choke & Kill, Sour Service, Cementg and Slim Hole s. Our quality control durg manufacture and testg processes ensures high quality products and total fulfillment to Environmental Standards and Norms. Alfagoa is an ISO 9001, ISO Company and our products are supplied with the relevant Quality and Testg Certificates. ALFAGOMMA INDUSTRIAL - TERAMO: INDUSTRIAL HOSE & FITTINGS ALFAGOMMA HYDRAULIC - TERAMO: HYDRAULIC HOSE & MANIPULATED TUBES ALFAGOMMA HYDRAULIC - COSENZA: HYDRAULIC HOSE ALFAGOMMA HYDRAULIC - COSENZA: HYDRAULIC FITTINGS & ADAPTERS ALFAGOMMA MARDEC JOHORE (MALAYSIA): HYDRAULIC HOSE DUNLOP HIFLEX - JOHORE (MALAYSIA): INDUSTRIAL HOSE DUNLOP HIFLEX - JOHORE (MALAYSIA): HYDRAULIC HOSE ALFAGOMMA NINGBO (CHINA): HYDRAULIC FITTINGS & ADAPTERS ALFAGOMMA DO BRASIL GUARANÉSIA (BRASIL): MANIPULATED TUBES AND HOSE ASSEMBLY ALFAGOMMA AMERICA - BURLINGTON: MANIPULATED TUBES AND HOSE ASSEMBLY EKO SISTEMA OLEODINAMICI s.r.l. CAMBIANO (TORINO): MANIPULATED TUBES AND ASSEMBLY MIX TMF - CASTELLO BRIANZA (LECCO): HYDRAULIC FITTINGS AND COMPONENTS Prted October 2014

4 INDEX HOSES... 3 Drillg... 3 Oil Well Cementg... 7 Blow out Prevention... 9 Oil Mare Dock Rig Supply Cargo Hose Floatg Roof Dra Fuel-Oil & Frackg Steam Acid, Chemical & Multipurpose Umbilical Seismic Waterblast Hydraulic Hose FITTINGS Industrial Fittg Hydraulic Fittg Quick Release Couplg ACCESSORIES Ball Valves Retag Systems Hose Protections Chas Hose Floats SYMBOL Internal Diameter Outside Diameter Maximum Workg Pressure Maximum Burst Pressure Conductive tube & cover DNV approved MSHA approved Mimum Bend Radius Vacuum Weight NOTE ALFAGOMMA reserves the right to modify specifications without prior notice. Weights and dimensions are nomal. Workg pressures and vacuum ratgs for are based at ambient temperature of 20 C (68 F) Pictures shown are for illustration purposes only. Actual construction may vary.

5 HOSE DRILLING SLIM HOLE ROTARY - FLEXOR RIG TM... 4 ROTARY DRILLING & VIBRATOR... 5

6 Drillg SLIM HOLE ROTARY - FLEXOR RIG Tube: Oil and biodegradable hydraulic fluid resistant synthetic rubber Reforcement: High tensile steel spirals Cover: Abrasion, ozone and hydrocarbon resistant synthetic rubber Application: Rotary, specially designed for portable, work-over and seismograph drillg rigs. MSHA approved Temperature: -40 C +100 C (-40 F +212 F) wire braid -40 C +120 C (-40 F +250 F) wire spiral Air max T = +70 C (+160 F) Length: Random up to 1 61 m from 1 ¼ to 3 Recoended fittg, page: Hydraulic fittg-api thread Constr. Dash Mpa psi Mpa psi kg/m lb/ft 4S ,7 1, ,2 2, S /4 49,8 1, ,8 3, S /2 57,3 2, ,3 4, S ,9 2, ,4 6, S /2 79 3, * 8120* ,35 4, S ,5 3, * 8120* ,07 5, S /2 51,8 2, * 12500* ,54 2, S ,6 3, * 12500* ,43 7, * Safety factor 2,5:1 fittgs 4 Dimensions and data shown may be changed without prior notice

7 Drillg ROTARY DRILLING & VIBRATOR Accordg to API 7K Grade D and E Tube: Oil and drillg mud resistant synthetic rubber Reforcement: Multiple layers of spiralled high tensile steel cords Cover: Abrasion, ozone and hydrocarbon resistant synthetic rubber Application: Rotary drillg, Vibrator, Motion Compensator Temperature: -20 C +100 C (-4 F +212 F) Length: 47,25 m (155 ft) max Note: Grade C (WP 4000 psi) available on demand Grade Test Pressure Dash Mpa psi Mpa psi Mpa psi kg/m lb/ft ,6 3,69 D ,4 13,06 8, /2 110,7 4,36 D ,4 17,36 11, ,0 4,96 D ,2 19,52 13, /2 138,7 5,46 D ,1 21,79 14, ,0 6,34 D ,1 34,47 23, ,0 4,02 E 52, ,2 18,59 12, /2 118,0 4,65 E 52, ,2 23,10 15, ,4 5,25 E 52, ,2 26,87 18, /2 146,0 5,75 E 52, ,1 30,22 20, ,4 6,63 E 52, ,1 44,77 30,04 fittgs 5 Dimensions and data shown may be changed without notice

8

9 HOSE OIL WELL CEMENTING OIL WELL CEMENTING... 8 OIL WELL CEMENTING 10K SUPERTUFF... 8 SUBSEA GROUTING 5K... 8

10 Oil Well Cementg OIL WELL CEMENTING Accordg to API 7K Tube: Oil and drillg mud resistant synthetic rubber Reforcement: Multiple layers of spiralled high tensile steel cables Cover: Abrasion, ozone and hydrocarbon resistant synthetic rubber Application: High pressure cement slurry transfer between pump manifold and cementg head Temperature: -20 C +100 C (-4 F +212 F) Length: 47,25 m (155 ft) max. Test Pressure Dash Mpa psi Mpa psi Mpa psi kg/m lb/ft ,6 3, ,4 13,06 8, ,0 4, ,2 19,52 13, /2 138,7 5, ,1 21,79 14, ,0 6, ,1 34,47 23, ,0 4, ,2 18,59 12, ,6 5, ,1 31,20 20, /2 148,3 5, ,0 35,00 23, ,3 6, ,9 51,10 34,29 fittgs OIL WELL CEMENTING SUPERTUFF Tube: Oil and biodegradable hydraulic fluids resistant synthetic rubber Reforcement: High tensile steel spirals Cover: Abrasion, ozone and hydrocarbon resistant synthetic rubber Application: Very high pressure hydraulic les. Also suitable for fuel oil, anti-freeze solutions, air and water. Special compact construction designed to operate at tight bend radius demandg applications. Specially designed for oil well cementg. MSHA approved Temperature: -40 C +121 C (-40 F +250 F) Air max T = +70 C (+160 F) Length: 61 m (200 ft) Constr. Dash Mpa psi Mpa psi kg/m lb/ft 4S S , ,08 4,76 SUBSEA GROUTING 5K Tube: Oil and biodegradable hydraulic fluids resistant synthetic rubber Reforcement: High tensile steel spirals Cover: Abrasion, ozone and hydrocarbon resistant synthetic rubber Application: Very high pressure hydraulic les. Also suitable for fuel oil, anti-freeze solutions, air and water. Special compact construction designed to operate at tight bend radius demandg applications. Specially designed for subsea groutg. MSHA approved Temperature: -40 C +121 C (-40 F +250 F) Air max T = +70 C (+160 F) Length: 61 m (200 ft) Constr. Dash Mpa psi Mpa psi kg/m lb/ft 6S ,1 2, ,8 6,540 4, Dimensions and data shown may be changed without prior notice

11 HOSE BLOW OUT PREVENTION CHOKE & KILL BOP - FIRESAFE

12 Blow Out Prevention BOP - FIRESAFE 5000 API 16-D Flame resistance Tube: Oil resistant synthetic rubber Reforcement: High tensile steel spirals Cover: Oil and fire resistant synthetic rubber Application: High pressure hydraulic les blow out prevention systems, where contuous operation case of fire is required Temperature: -40 C +121 C (-40 F +250 F) air max T = +70 C (+160 F) Length: Random up to 1 61 m (200 ft) from 1 1/4 to 2 Recoended fittg, page: Hydraulic fittg-api thread Constr. Dash Mpa psi Mpa psi kg/m lb/ft 4S 4 6 1/4 26,0 1, ,91 0,70 0,47 4S /8 28,7 1, ,09 0,79 0,53 4S /2 31,8 1, ,06 1,28 0,86 4S /4 39,6 1, ,81 1,85 1,24 4S ,0 1, ,39 2,69 1,80 4S /4 53,8 2, ,11 3,34 2,24 6S /2 65,8 2, ,05 5,87 3,94 6S ,4 3, ,56 7,78 5,22 fittgs CHOKE & KILL API 16-C Fire Resistant Tube: Oil and drillg mud resistant synthetic rubber Reforcement: Multiple layers of spiralled high tensile steel cables Cover: Staless steel armor Application: Choke & kill BOP systems. Designed for application with Sour Gas and H 2 S up to +121 C (+250 F) Temperature: -20 C +120 C (-4 F +248 F) Length: 47,25 m (155 ft) max Note: Staless steel armor covered available on demand Test Pressure Dash Mpa psi Mpa psi Mpa psi kg/m lb/ft ,2 3, ,4 11,30 7, /2 108,7 4, ,4 15,60 10, ,2 4, ,2 20,90 14, /2 139,1 5, ,1 23,49 15, ,2 6, ,1 36,50 24, ,2 4, ,2 20,17 13, /2 116,1 4, ,2 23,05 15, ,0 5, ,1 31,56 21, /2 149,9 5, ,0 34,35 23, ,3 6, ,9 51,42 34, Dimensions and data shown may be changed without prior notice

13 HOSE OIL MARINE FLOATING AND SUBMARINE OCIMF HOSES AA Crude oil flowle & riser 25 bar (375 psi)... 13

14 Oil Mare FLOATING AND SUBMARINE OCIMF HOSES Accordg to Offshore & Moorg guide, 4th edition, 1991 Available sgle or double carcass Submare with or without floatg collars Submare with collars one or two ends reforced Floatg Half floatg Half floatg one or two ends reforced Tanker rail tapered bore fittgs Internal Nomal Diameter: 6, 8, 10, 12, 16, 20, 24 Workg Pressure: 15 bar (225 psi) and 20 bar (300 psi) Operatg pressure range: -0,85/15bar (-12/225 psi) and -0,85/20 bar (-12/300 psi) Burstg pressure: m 5:1 sgle carcass m 2:1 double carcass Flow: 21 m/s max. Fluid Temperature: - 20 C +82 C (-4 F +180 F) Atmosphere Temperature: - 29 C +52 C (126 F) Aromatic Content: 50% max. (standard version). Up to 100% on demand Mimum Bend Radius: 4 x ID: Submare and Tanker Rail 6 x ID: Floatg 2 x ID: Super Bendg (on customer demand) Elongation: Permanent 0,7% max. Temporary 2,5% max. Standard Lengths: 10,7m. (35ft) and 9,1m. (30ft) 12 Dimensions and data shown may be changed without prior notice

15 Oil Mare 643AA Crude oil flowle & riser 25 bar (375 psi) Tube: Black NBR Reforcement: High tensile steel cords Cover: Black CR - abrasion, ozone, salt water resistant Use: Fuel and crude oil flowle and riser extended oilfield test. Excellent end load resistance. Resistant to sour gas, 5 ppm Safety factor: 4:1 Temperature: -30 C +93 C (-22 F +200 F) Staless Steel version available on request Recoended fittg, page: Combation nipple with pre-crimped ferrule...72 Insert with flange PN 16 - ASA ch ch bar psi ch % kg/m lb/ft , ,900 3, , ,740 0, , ,300 7,590 fittgs 13 Dimensions and data shown may be changed without notice

16

17 HOSE DOCK 60MAA Fuel-oil S&D 10 bar (150 psi) - EN 1765/S DAA Fuel-oil S&D 10 bar (150 psi) - EN 1765/S AAA Fuel-oil delivery 10 bar (150 psi) - EN 1765/L NAA Fuel-oil S&D 15 bar (225 psi) - EN 1765/S GAA Fuel-oil S&D 15 bar (225 psi) - EN 1765/S DAA Fuel-oil delivery 15 bar (225 psi) - EN 1765/L JAA Fuel-oil S&D 15 bar (225 psi) - EN 1765/S N331 Acid-chemical S&D 14 bar (200 psi) - heavy duty - PTFE - BS 5842 arrêté ADR annexe N511 Fuel-oil S&D 14 bar (200 psi) - heavy duty - high temperature +100 C (+212 F) BS 3492/BX - BS 5842 arrêté ADR annexe

18 Dock 60MAA Fuel-oil S&D 10 bar (150 psi) EN 1765/S10 Tube: Black NBR Reforcement: High tensile textile cords with embedded steel helix wire Cover: Black CR - abrasion, ozone, sea water and hydrocarbon resistant Use: Crude oil and liquid petroleum products suction and delivery to/from tankers and bunkerg vessels. Max 55% aromatic content resistance. Version suitable for 100% aromatic content or biofuel available on request. Electrically contuous (discontuous on request) Safety factor: 4:1 Temperature: -20 C +82 C (-4 F +180 F) Staless Steel version available on request Recoended fittg, page: Combation nipple with pre-crimped ferrule...72 Insert with flange PN 16 - ASA ch ch bar psi ch % kg/m lb/ft , , ,960 3, , , ,100 4, , , ,200 8, , , ,300 11,630 fittgs 60DAA Fuel-oil S&D 10 bar (150 psi) EN 1765/S10 Tube: Black NBR Reforcement: High tensile textile cords with embedded steel helix wire Cover: Black CR - abrasion, ozone, sea water and hydrocarbon resistant Use: Crude oil and liquid petroleum products suction and delivery to/from tankers and bunkerg vessels. Max 55% aromatic content resistance. Electrically contuous (discontuous on request) Also available: 60EAA 100% aromatic content 60FAA biofuel Safety factor: 4:1 Temperature: -20 C +82 C (-4 F +180 F) Staless Steel version available on request Recoended fittg, page: Built- fittgs with flange PN 16 - ASA ch ch bar psi ch % kg/m lb/ft , ,200 6, , ,900 10, , ,300 16, , ,900 22, , ,800 30,780 64AAA Fuel-oil delivery 10 bar (150 psi) EN 1765/L10 Tube: Black NBR Reforcement: High tensile textile cords Cover: Black CR - abrasion, ozone, sea water and hydrocarbon resistant Use: Crude oil and liquid petroleum products delivery to/ from tankers and bunkerg vessels. Max 55% aromatic content resistance. Electrically contuous (discontuous on request) Also available: 64BAA 100% aromatic content 64CAA biofuel Safety factor: 4:1 Temperature: -20 C +82 C (-4 F +180 F) Staless Steel version available on request Recoended fittg, page: Built- fittgs with flange PN 16 - ASA ch ch bar psi ch % kg/m lb/ft ,00 6,700 4, ,00 11,000 7, ,00 16,100 10, ,00 20,100 13, ,00 25,000 16, Dimensions and data shown may be changed without prior notice

19 Dock 60NAA Fuel-oil S&D 15 bar (225 psi) EN 1765/S15 Tube: Black NBR Reforcement: High tensile textile cords with embedded steel helix wire Cover: Black CR- abrasion, ozone, sea water and hydrocarbon resistant Use: Crude oil and liquid petroleum products suction and delivery to/from tankers and bunkerg vessels. Max 55% aromatic content resistance. Version suitable for 100% aromatic content or biofuel available on request. Electrically contuous (discontuous on request) Safety factor: 4:1 Temperature: -20 C +82 C (-4 F +180 F) Staless Steel version available on request Recoended fittg, page: Combation nipple with pre-crimped ferrule...72 Insert with flange PN 16 - ASA ch ch bar psi ch % kg/m lb/ft , , ,710 3, , , ,250 4, , , ,400 8,330 60GAA Fuel-oil S&D 15 bar (225 psi) EN 1765/S15 Tube: Black NBR Reforcement: High tensile textile cords with embedded steel helix wire Cover: Black CR - abrasion, ozone, sea water and hydrocarbon resistant Use: Crude oil and liquid petroleum products suction and delivery to/from tankers and bunkerg vessels. Max 55% aromatic content resistance. Electrically contuous (discontuous on request) Also available: 60HAA 100% aromatic content 60IAA biofuel Safety factor: 4:1 Temperature: -20 C +82 C (-4 F +180 F) Staless Steel version available on request Recoended fittg, page: Built- fittgs with flange PN 16 - ASA ch ch bar psi ch % kg/m lb/ft , ,000 7, , ,100 11, , ,500 17, , ,600 24, , ,400 34,540 fittgs 64DAA Fuel-oil delivery 15 bar (225 psi) EN 1765/L15 Tube: Black NBR Reforcement: High tensile textile cords Cover: Black CR - abrasion, ozone, sea water and hydrocarbon resistant Use: Crude oil and liquid petroleum products delivery to/ from tankers and bunkerg vessels. Max 55% aromatic content resistance. Electrically contuous (discontuous on request) Also available: 64EAA 100% aromatic content 64FAA biofuel Safety factor: 4:1 Temperature: -20 C +82 C (-4 F +180 F) Staless Steel version available on request Recoended fittg, page: Built- fittgs with flange PN 16 - ASA ch ch bar psi ch % kg/m lb/ft ,00 7,500 5, ,00 13,400 9, ,00 18,100 12, ,00 24,700 16, ,00 31,400 21, Dimensions and data shown may be changed without notice

20 Dock 60JAA Fuel-oil S&D 15 bar (225 psi) EN 1765/S15 Tube: Black NBR Reforcement: High tensile textile cords with embedded steel helix wire Cover: Black CR - abrasion, ozone, sea water and hydrocarbon resistant Use: Crude oil and liquid petroleum products suction and delivery to/from tankers and bunkerg vessels. Max 55% aromatic content resistance. Version suitable for 100% aromatic content or biofuel available on request. Electrically contuous (discontuous on request) Also available: 60KAA 100% aromatic content Safety factor: 5:1 Temperature: -31 C +43 C (-24 F +200 F) Staless Steel version available on request Recoended fittg, page: Built- fittgs with flange PN 16 - ASA ch ch bar psi ch % kg/m lb/ft , ,400 9, , ,700 14, , ,000 21, , ,700 30, , ,600 38,710 fittgs 18 Dimensions and data shown may be changed without prior notice

21 Dock 5N331 Acid-chemical S&D 14 bar (200 psi) - heavy duty PTFE BS 5842 Inner wire: Staless steel Tube: PTFE film Cover: Grey PVC coated fabric Outer wire: Galvanized steel Use: Acid, chemical, fuel and solvents suction and delivery. Specially designed for long service life heavy duty applications requirg resistance to high temperature Safety factor: 4:1 Temperature: -30 C +115 C (-22 F +239 F) EN arrêté ADR annexe 1 available on request Recoended fittg, page: Composite fittg ch ch bar psi ch % kg/m lb/ft /2 53 2, , ,300 0, , , ,700 1,140 63* 2 1/2 78 3, , ,300 1, /8 78 3, , ,500 1, , , ,700 1, /8 94 3, , ,500 2, , , ,200 4,160 * Pitch for UK market 6N511 Fuel-oil S&D 14 bar (200 psi) - heavy duty high temperature +100 C (+212 F) BS 3492/BX BS 5842 Inner wire: Galvanised steel Tube: Polyester film Cover: Grey PVC with longitudal yellow stripe coated fabric Outer wire: Galvanized steel Use: Fuel and oil suction and delivery. Specially designed for long service life heavy duty applications requirg resistance to high temperature Safety factor: 4:1 Temperature: -30 C +80 C (-22 F +176 F) EN arrêté ADR annexe 1 available on request Recoended fittg, page: Composite fittg ch ch bar psi ch % kg/m lb/ft , ,400 4, , ,400 8, , ,800 14, , , ,000 18,150 fittgs 19 Dimensions and data shown may be changed without notice

22

23 HOSE RIG SUPPLY FUEL & LIQUID MUD 642AA Rig supply soft wall, fuel-liquid mud 10 bar (150 psi) AA Rig supply soft wall, fuel-liquid mud 16 bar (240 psi) end load resistance kg AA Rig supply soft wall, fuel-liquid mud 20 bar (300 psi) end load resistance kg AA Rig supply soft wall, fuel-liquid mud end load resistance kg AA Rig supply hard wall, fuel-liquid mud... 23

24 Rig Supply - Fuel & Liquid Mud 642AA Rig supply soft wall fuel-liquid mud 10 bar (150 psi) Tube: Black conductive NBR Reforcement: High tensile textile cords Cover: Black conductive CR - abrasion, ozone, hydrocarbon and fire resistant Use: Fuel, oil and liquid mud transfer from supply vessels to offshore platforms. Also suitable for sea water pumpg and barite transfer Safety factor: 4:1 Temperature: -30 C +70 C (-22 F +158 F) Recoended fittg, page: NPT thread combation nipple with pre-crimped ferrule...72 ch ch bar psi ch % kg/m lb/ft , ,760 1, , ,740 2, , ,630 3, , ,510 3,705 fittgs 646AA Rig supply soft wall fuel-liquid mud 16 bar (240 psi) end load resistance kg Tube: Black conductive NBR Reforcement: High tensile textile cords Cover: Black conductive CR - abrasion, ozone, hydrocarbon and fire resistant Use: Fuel, oil and liquid mud transfer from supply vessels to offshore platforms. Also suitable for sea water pumpg and barite transfer. Specially designed for reelg applications and weak lk couplgs use. Max utilized load kg Safety factor: 4:1 Temperature: -30 C +70 C (-22 F +158 F) Recoended fittg, page: NPT thread combation nipple with pre-crimped ferrule...72 ch ch bar psi ch % kg/m lb/ft , ,590 1, , ,380 2, , ,680 2, , ,350 3, AA Rig supply soft wall fuel-liquid mud 20 bar (300 psi) end load resistance kg Tube: Black conductive NBR Reforcement: High tensile textile cords Cover: Black conductive CR - abrasion, ozone, hydrocarbon and fire resistant Use: Fuel, oil and liquid mud transfer from supply vessels to offshore platforms. Also suitable for sea water pumpg and barite transfer. Specially designed for reelg applications and weak lk couplgs use Max utilized load kg Safety factor: 4:1 Temperature: -30 C +70 C (-22 F +158 F) Recoended fittg, page: NPT thread combation nipple with pre-crimped ferrule...72 Rig supply: for ease of identification, coloured over-ferrules available on demand. ch ch bar psi ch % kg/m lb/ft , ,590 1, , ,520 2, Dimensions and data shown may be changed without prior notice

25 Rig Supply - Fuel & Liquid Mud 652AA Rig supply soft wall fuel-liquid mud end load resistance kg Tube: Black conductive NBR Reforcement: High tensile textile cords Cover: Black conductive CR - abrasion, ozone, hydrocarbon and fire resistant Use: Fuel, oil and liquid mud transfer from supply vessels to offshore platforms. Also suitable for sea water pumpg and barite transfer. Specially designed for reelg applications and weak lk couplgs use Max utilized load kg Safety factor: 4:1 Temperature: -30 C +70 C (-22 F +158 F) Recoended fittg, page: NPT thread combation nipple with pre-crimped ferrule...72 ch ch bar psi ch % kg/m lb/ft , ,910 2, , ,700 3, AA Rig supply hard wall fuel-liquid mud Tube: Black conductive NBR Reforcement: High tensile textile cords with embedded steel helix wire Cover: Black conductive CR - abrasion, ozone, hydrocarbon and fire resistant Use: Fuel, oil and liquid mud transfer from supply vessels to offshore platforms. Also suitable for sea water pumpg and barite transfer Safety factor: 4:1 Temperature: -30 C +70 C (-22 F +158 F) Recoended fittg, page: NPT thread combation nipple with pre-crimped ferrule...72 ch ch bar psi ch % kg/m lb/ft , , ,300 2, , , ,840 3, , , ,930 4, , , ,240 5,540 fittgs Rig supply: for ease of identification, coloured over-ferrules available on demand Dimensions and data shown may be changed without notice

26

27 HOSE RIG SUPPLY BARITE & DRY CEMENT 742AA Rig supply soft wall bulk material 10 bar (150 psi) AA Rig supply soft wall bulk material 20 bar (300 psi) end load resistance kg AA Rig supply hard wall bulk material 10 bar (150 psi)... 26

28 Rig Supply - Barite & Dry Cement 742AA Rig supply soft wall bulk material 10 bar (150 psi) Tube: Black conductive NR - abrasion resistant Reforcement: High tensile textile cords Cover: Black conductive SBR/NR - abrasion and ozone resistant Use: Bulk material, barite and dry cement transfer from supply vessels to offshore platforms Safety factor: 4:1 Temperature: -30 C +80 C (-22 F +176 F) Recoended fittg, page: NPT thread combation nipple with pre-crimped ferrule...72 ch ch bar psi ch % kg/m lb/ft , ,950 2, , ,870 3,275 fittgs 748AA Rig supply soft wall bulk material 20 bar (300 psi) end load resistance kg Tube: Black conductive NR - abrasion resistant Reforcement: High tensile textile cords Cover: Black conductive SBR/NR - abrasion and ozone resistant Use: Bulk material, barite and dry cement transfer from supply vessels to offshore platforms. Specially designed for reelg applications and weak lk couplgs use. Max utilized load kg. Safety factor: 4:1 Temperature: -30 C +80 C (-22 F +176 F) Recoended fittg, page: NPT thread combation nipple with pre-crimped ferrule...72 ch ch bar psi ch % kg/m lb/ft , ,150 2, , ,120 3, AA Rig supply hard wall bulk material 10 bar (150 psi) Tube: Black conductive NR - abrasion resistant Reforcement: High tensile textile cords with embedded steel helix wire Cover: Black conductive SBR/NR - abrasion and ozone resistant Use: Bulk material, barite and dry cement transfer from supply vessels to offshore platforms Safety factor: 4:1 Temperature: -30 C +80 C (-22 F +176 F) Recoended fittg, page: NPT thread combation nipple with pre-crimped ferrule...72 ch ch bar psi ch % kg/m lb/ft , , ,770 3, , , ,940 4,665 Rig supply: for ease of identification, coloured over-ferrules available on demand Dimensions and data shown may be changed without prior notice

29 HOSE RIG SUPPLY POTABLE WATER 442LI Rig supply soft wall potable water 10 bar (150 psi) FDA LI Rig supply soft wall potable water 20 bar (300 psi) end load resistance kg FDA LI Rig supply hard wall potable water 10 bar (150 psi) FDA... 28

30 Rig Supply - Potable Water 442LI Rig supply soft wall potable water 10 bar (150 psi) FDA Tube: White NR Reforcement: High tensile textile cords Cover: Orange NBR/PVC - abrasion, ozone and hydrocarbon resistant Use: Potable water transfer from supply vessels to offshore platforms. Sterilize with 5% soda solution Safety factor: 4:1 Temperature: -30 C +80 C (-22 F +176 F) Recoended fittg, page: NPT thread combation nipple with pre-crimped ferrule...72 ch ch bar psi ch % kg/m lb/ft , ,890 1, , ,910 2,630 fittgs 448LI Rig supply soft wall potable water 20 bar (300 psi) end load resistance kg FDA Tube: White NR Reforcement: High tensile textile cords Cover: Orange NBR/PVC - abrasion, ozone and hydrocarbon resistant Use: Potable water transfer from supply vessels to offshore platforms. Specially designed for reelg applications and weak lk couplgs use. Sterilize with 5% soda solution. Max utilized load kg Safety factor: 4:1 Temperature: -30 C +80 C (-22 F +176 F) Recoended fittg, page: NPT thread combation nipple with pre-crimped ferrule...72 ch ch bar psi ch % kg/m lb/ft , ,230 2, LI Rig supply hard wall potable water 10 bar (150 psi) FDA Tube: White NR Reforcement: High tensile textile cords with embedded steel helix wire Cover: Orange NBR/PVC - abrasion, ozone and hydrocarbon resistant Use: Potable water transfer from supply vessel to offshore platforms. Sterilize with 5% soda solution Safety factor: 4:1 Temperature: -30 C +80 C (-22 F +176 F) Recoended fittg, page: NPT thread combation nipple with pre-crimped ferrule...72 ch ch bar psi ch % kg/m lb/ft , , ,690 2, , , ,860 3, Dimensions and data shown may be changed without prior notice

31 HOSE TRACTION RESISTANT CARGO HOSE 641AA Oil & Mud cargo 15 bar (225 psi) end load resistance kg AA Oil & Mud cargo 15 bar (225 psi) end load resistance kg AA Cargo 15 bar (225 psi) end load resistance kg AA Drillg waste & cargo 15 bar (225 psi) end load resistance kg... 31

32 Traction Resistant - Cargo Hose 641AA Oil & Mud cargo 15 bar (225 psi) end load resistance kg Tube: Black conductive NBR Reforcement: High tensile textile fabric - boot straps Cover: Black conductive NBR/PVC - abrasion, ozone, hydrocarbon and fire resistant Use: Fuel and oil barite liquid transfer. Particulary suitable for drag cha application where low elongation is required. Also suitable for electrical cables and hydraulic protection. Safety factor: 3:1 Temperature: -30 C +70 C (-22 F +158 F) Recoended fittg, page: Combation nipple with pre-crimped ferrule...72 Insert with flange PN 16 - ASA ch ch bar psi ch % kg/m lb/ft , ,260 2, , ,090 3, , ,100 4,100 fittgs 624AA Oil & Mud cargo 15 bar (225 psi) end load resistance kg Tube: Black conductive NBR Reforcement: High tensile textile cords with embedded steel helix wire - boot straps Cover: Black conductive CR - abrasion, ozone and hydrocarbon resistant Use: Fuel and oil suction and delivery. Specially designed for liquid mud and barite transfer from vessel to rig supply or from ship to ship Safety factor: 4:1 Temperature: -30 C +70 C (-22 F +158 F) Recoended fittg, page: Combation nipple with pre-crimped ferrule...72 Insert with flange PN 16 - ASA ch ch bar psi ch % kg/m lb/ft , ,910 3, , ,400 4, , ,340 5, AA Oil & Mud cargo 15 bar (225 psi) end load resistance kg Tube: Black conductive NBR Reforcement: High tensile textile cords with embedded steel helix wire - boot straps Cover: Black conductive CR - abrasion, ozone and hydrocarbon resistant Use: Cargo specially designed for oil based muds and abrasive media, used floatg umbilical on oil recovery systems. Also suitable as protection for electrical cables and flexible hydraulic s loops (umbilical) applications at the drillg deck on oil rgs. Special end load resistance and heavy duty construction Safety factor: 4:1 Temperature: -30 C +80 C (-22 F +176 F) Recoended fittg, page: Combation nipple with pre-crimped ferrule...72 Insert with flange PN 16 - ASA ch ch bar psi ch % kg/m lb/ft , ,800 5, , ,300 8, Dimensions and data shown may be changed without prior notice

33 Traction Resistant - Cargo Hose 727AA Drillg waste & cargo - hard wall 15 bar (225 psi) end load resistance kg Tube: Black conductive NR - abrasion resistant Reforcement: High tensile textile cords with embedded steel helix wire - boot straps Cover: Black conductive SBR/NR - abrasion and ozone resistant Use: Dumple for drill cuttgs contag sand, sea water and abrasive material. Also suitable as cargo for barite transfer. Specially designed for heavy duty applications, with highest end load resistance. Not to be used with oil based mud Safety factor: 3:1 Temperature: -30 C +80 C (-22 F +176 F) Recoended fittg: Contact our offices for connections. Staless Steel version available on request ch ch bar psi ch % kg/m lb/ft , ,770 11,945 Rig supply: for ease of identification, coloured over-ferrules available on demand. fittgs 31 Dimensions and data shown may be changed without notice

34

35 HOSE FLOATING ROOF DRAIN 906AA Roof dra 10 bar (150 psi)... 34

36 Floatg Roof Dra 906AA Roof dra 10 bar (150 psi) Tube: Black conductive NBR Reforcement: High tensile textile cords with embedded steel helix wire Cover: Black conductive NBR- abrasion, ozone and hydrocarbon resistant Use: Ra water draage floatg petrochemical storage tank roofs. 80% max aromatic content resistance Also available: 905AA 100% aromatic Safety factor: 3:1 Temperature: -20 C +82 C (-4 F +180 F) Assembly available with fittgs complete with flanges PN 16 - ASA 150 and lead ballast ch ch bar psi ch % kg/m lb/ft , , ,780 3, , , ,340 4, , , ,550 7,090 fittgs 34 Dimensions and data shown may be changed without prior notice

37 HOSE FUEL-OIL & FRACKING 655AA Fuel-oil delivery 16 bar (240 psi) exceeds EN 1761 TRbf 131/ AA Fuel-oil EN exceeds EN 1761 TRbf 131/ AA Fuel-oil S&D 20 bar (300 psi) AA Oil rigger S&D 10 bar (150 psi) C1AA Oil rigger-frackg S&D 10 bar (150 psi) corrugated D1AA Frackg delivery 27 bar (400 psi) D2AA Fracturg delivery 27 bar (400 psi) Supertuff... 38

38 Fuel, Oil & Frackg 655AA Fuel-oil delivery 16 bar (240 psi) exceeds EN 1761 TRbf 131/2 Tube: Black conductive NBR Reforcement: High tensile textile cords Cover: Black conductive CR - abrasion, ozone, hydrocarbon and fire resistant Use: Oil and fuel transfer the petrochemical dustry. Designed for long service life heavy duty applications. Safety factor: 3:1 Temperature: -30 C +70 C (-22 F +158 F) Recoended fittg, page: Refer to hydraulic catalogue Combation nipple with pre-crimped ferrule...72 Insert with flange PN 16 - ASA ch ch bar psi ch % kg/m lb/ft 19 3/4 31 1, ,00 0,590 0, , ,00 0,720 0, /4 44 1, ,00 0,900 0, /2 51 2, ,00 1,060 0, , ,00 1,630 1, /2 79 3, ,00 1,980 1, , ,00 2,430 1, , ,50 3,100 2, , ,00 5,440 3,660 fittgs 619AA Fuel-oil EN exceeds EN 1761 TRbF 131/2 Tube: Black conductive NBR Reforcement: High tensile textile cords with embedded steel helix wire - antistatic wire Cover: Black conductive CR - abrasion, ozone, hydrocarbon and fire resistant Use: Fuel and oil suction and delivery. Designed for long service life heavy duty applications Safety factor: 4:1 Temperature: -30 C +70 C (-22 F +158 F) Recoended fittg, page: Refer to hydraulic catalogue Combation nipple with pre-crimped ferrule...72 Insert with flange PN 16 - ASA ch ch bar psi ch % kg/m lb/ft 19 3/4 31 1, , ,690 0, , , ,840 0, /4 44 1, , ,030 0, /2 51 2, , ,180 0, , , ,760 1, , , ,790 1, /2 79 3, , ,330 1, , , ,790 1, , , ,820 1, , , ,760 2, , , ,820 2, AA Fuel-oil S&D 20 bar (300 psi) Tube: Black conductive NBR Reforcement: High tensile textile cords with embedded steel helix wire - antistatic wire Cover: Black CR - abrasion, ozone and hydrocarbon resistant Use: Fuel and oil suction and delivery. Designed for long service life heavy duty applications Safety factor: 3:1 Temperature: -30 C +80 C (-22 F +176 F) Recoended fittg, page: Refer to hydraulic catalogue Combation nipple with pre-crimped ferrule...72 Insert with flange PN 16 - ASA ch ch bar psi ch % kg/m lb/ft , , ,640 1, /2 77 3, , ,160 1, , , ,640 1, , , ,610 2, , , ,080 4, , , ,320 5, , , ,740 9, Dimensions and data shown may be changed without prior notice

39 Fuel, Oil & Frackg 601AA Oil rigger-frackg S&D 10 bar (150 psi) Tube: Black NBR/PVC Reforcement: High tensile textile cords with embedded steel helix wire Cover: Black SBR - abrasion and ozone resistant Use: Crude oil mud oilfield vacuum tank service. Extensively used frackg operations. Safety factor: <= 102 3: ,5:1 Temperature: -30 C +80 C (-22 F +176 F) Recoended fittg, page: Combation nipple with pre-crimped ferrule...72 Insert with flange PN 16 - ASA ch ch bar psi ch % kg/m lb/ft , , ,380 0, , , ,570 1, , , ,560 2, , , ,820 4,585 6C1AA Oil rigger-frackg S&D 10 bar (150 psi) corrugated Tube: Black NBR/PVC Reforcement: High tensile textile cords with embedded steel helix wire. Light weight and flexible construction Cover: Black SBR - abrasion and ozone resistant Use: Oilfield vacuum tank service for crude oil mud handlg Safety factor: 3:1 Temperature: -30 C +80 C (-22 F +176 F) ch ch bar psi ch % kg/m lb/ft , ,290 0, , ,400 1, , ,560 2, , ,620 4, , ,200 7,515 fittgs 37 Dimensions and data shown may be changed without notice

40 Fuel, Oil & Frackg 6D1AA Frackg delivery 27 bar (400 psi) Tube: Black synthetic elastomer Reforcement: High tensile textile cords Cover: Black syntethic elastomer - abrasion, oil and ozone resistant Use: Frackg fluids, liquid mud and crude oil delivery heavy duty oilfield and gas exploration service. Safety factor: 4:1 Temperature: -30 C +80 C (-22 F +176 F) Recoended fittg, page: Combation nipple with pre-crimped ferrule...72 Haer lug union ch ch bar psi ch % kg/m lb/ft , ,070 2, , ,320 2,90 6D2AA Fracturg delivery 27 bar (400 psi) Supertuff Tube: Black synthetic elastomer Reforcement: High tensile textile cords Cover: Black supertuff cover - abrasion, oil and ozone resistant Use: frackg fluids, liquid mud and crude oil delivery heavy duty oilfield and gas exploration service. special supertuff cover for excellent abrasion resistance. Safety factor: 4:1 Temperature: -30 C +80 C (-22 F +176 F) fittgs Recoended fittg, page: Combation nipple with pre-crimped ferrule...72 Haer lug union ch ch bar psi ch % kg/m lb/ft , ,360 2, Dimensions and data shown may be changed without prior notice

41 HOSE STEAM 340AA Steam 18 bar (270 psi) steel braided AH Steam 18 bar (270 psi) steel braided AH Steam 18 bar (270 psi) steel braided EN ISO 6134/2A AA Steam 18 bar (270 psi) - CIIR steel braided AH Steam 18 bar (270 psi) - CIIR steel braided AH Steam 18 bar (270 psi) - CIIR steel braided EN ISO 6134/2A... 41

42 Steam 340AA Steam 18 bar (270 psi) steel braided Tube: Black conductive EPDM Reforcement: High tensile steel wire braids Cover: Black conductive EPDM - heat, abrasion and ozone resistant - p pricked Use: Saturated and superheated steam Safety factor: 10:1 Temperature: -40 C +210 C (-40 F +410 F) termittent to 232 C (450 F) Recoended fittg, page: Refer to Alfacrimp-One Piece catalogue Ground jot seal ch ch bar psi ch % kg/m lb/ft 13 1/2 23 0, ,00 0,410 0, /4 31 1, ,50 0,760 0, , ,00 0,890 0,600 fittgs 340AH Steam 18 bar (270 psi) steel braided Tube: Black conductive EPDM Reforcement: High tensile steel wire braids Cover: Red EPDM - heat, abrasion and ozone resistant - p pricked Use: Saturated and superheated steam Safety factor: 10:1 Temperature: -40 C +210 C (-40 F +410 F) termittent to 232 C (450 F) Recoended fittg, page: Refer to Alfacrimp-One Piece catalogue Ground jot seal ch ch bar psi ch % kg/m lb/ft 13 1/2 23 0, ,00 0,420 0, /8 26 1, ,50 0,460 0, /4 31 1, ,50 0,770 0, , ,00 0,900 0, /4 46 1, ,50 1,270 0, /2 52 2, ,00 1,370 0, , ,00 2,050 1, /2 81 3, ,00 2,960 1, , ,00 3,720 2, AH Steam 18 bar (270 psi) steel braided EN ISO 6134/2A Tube: Black conductive EPDM Reforcement: High tensile steel wire braids Cover: Red EPDM - heat, abrasion and ozone resistant - p pricked Use: Saturated and superheated steam Safety factor: 10:1 Temperature: -40 C +210 C (-40 F +410 F) termittent to 232 C (450 F) Recoended fittg, page: Ground jot seal ch ch bar psi ch % kg/m lb/ft 13 1/2 25 0, ,00 0,470 0, /4 33 1, ,50 0,870 0, , ,00 0,990 0, /4 48 1, ,50 1,470 0, /2 54 2, ,00 1,600 1, , ,00 2,290 1, Dimensions and data shown may be changed without prior notice

43 341AA Steam 18 bar (270 psi) - CIIR steel braided Tube: Black conductive chlorobutyl Reforcement: High tensile steel wire braids Cover: Black conductive EPDM - heat, abrasion and ozone resistant - p pricked Use: Saturated and superheated steam Safety factor: 10:1 Temperature: -40 C +210 C (-40 F +410 F) termittent to 232 C (450 F) Recoended fittg, page: Ground jot seal ch ch bar psi ch % kg/m lb/ft 19 3/4 31 1, ,50 0,780 0, , ,00 0,920 0, /4 46 1, ,50 1,320 0, /2 52 2, ,00 1,430 0, , ,00 2,150 1, AH Steam 18 bar (270 psi) - CIIR steel braided Tube: Black conductive chlorobutyl Reforcement: High tensile steel wire braids Cover: Red EPDM - heat, abrasion and ozone resistant - p pricked Use: Saturated and superheated steam Safety factor: 10:1 Temperature: -40 C +210 C (-40 F +410 F) termittent to 232 C (450 F) Recoended fittg, page: Ground jot seal ch ch bar psi ch % kg/m lb/ft 19 3/4 31 1, ,50 0,790 0, , ,00 0,930 0, /4 46 1, ,50 1,340 0, /2 52 2, ,00 1,460 0, , ,00 2,130 1,435 fittgs 345AH Steam 18 bar (270 psi) - CIIR steel braided EN ISO 6134/2A Tube: Black conductive chlorobutyl Reforcement: High tensile steel wire braids Cover: Red EPDM - heat, abrasion and ozone resistant - p pricked Use: Saturated and superheated steam Safety factor: 10:1 Temperature: -40 C +210 C (-40 F +410 F) termittent to 232 C (450 F) Recoended fittg, page: Ground jot seal ch ch bar psi ch % kg/m lb/ft 13 1/2 25 0, ,00 0,490 0, /4 33 1, ,50 0,890 0, , ,00 1,050 0, , ,00 2,300 1, Dimensions and data shown may be changed without notice

44

45 HOSE ACID, CHEMICAL & MULTIPURPOSE 529AA Acid-chemical S&D 16 bar (232 psi) UHMWPE EN OE Acid-chemical S&D 16 bar (240 psi) UHMWPE FDA OE Acid-chemical S&D 16 bar (240 psi) UHMWPE FDA AE General purpose 20 bar (300 psi) EPDM AH Multipurpose 20 bar (300 psi) - non conductive NAK Nitrogen 20 bar (300 psi) - heavy duty... 45

46 Acid, Chemical & Multipurpose 529AA Acid-chemical S&D 16 bar (240 psi) - UHMWPE EN Tube: Black conductive UHMWPE (Ultra High Molecular Weight Polyethylene) Reforcement: High tensile textile cords with embedded steel helix wire - antistatic wire Cover: Black conductive EPDM - abrasion, ozone and fire resistant Use: Acid and chemical suction and delivery. Suitable for 98% of existg chemicals Safety factor: 4:1 Temperature: -30 C +100 C (-22 F +212 F) Recoended fittg, page: Refer to hydraulic catalogue Insert with flange PN 16 - ASA Staless Steel version available on request ch ch bar psi ch % kg/m lb/ft 19 3/4 31 1, , ,680 0, , , ,830 0, /4 44 1, , ,010 0, /2 51 2, , ,160 0, , , ,820 1, , , ,850 1, , , ,880 1, , , ,910 1, , , ,870 2, , , ,930 2,645 fittgs 509OE Acid-chemical S&D 16 bar (240 psi) - UHMWPE FDA Tube: Transparent UHMWPE (Ultra High Molecular Weight Polyethylene) Reforcement: High tensile textile cords with embedded steel helix wire Cover: Blue EPDM - abrasion and ozone resistant Use: Acid and chemical suction and delivery. Suitable for 98% of existg chemicals. Safety factor: 3:1 Temperature: -20 C +65 C (-4 F +150 F) Recoended fittg, page: Refer to hydraulic catalogue Insert with flange PN 16 - ASA Staless Steel version available on request ch ch bar psi ch % kg/m lb/ft 19 3/4 31 1, , ,600 0, , , ,730 0, /4 44 1, , ,880 0, /2 50 1, , ,010 0, / , , ,060 0, , , ,340 0, /2 77 3, , ,090 1, , , ,840 1, , , ,870 2, OE Acid-chemical S&D 16 bar (240 psi) - UHMWPE corrugated - FDA Tube: Transparent UHMWPE (Ultra High Molecular Weight Polyethylene) Reforcement: High tensile textile cords with embedded steel helix wire Cover: Blue EPDM - abrasion and ozone resistant Use: Acid and chemical suction and delivery. Suitable for 98% of existg chemicals. Special construction for maximum flexibility Safety factor: 3:1 Temperature: -30 C +100 C (-22 F +212 F) ch ch bar psi ch % kg/m lb/ft ,00 1,390 0, ,00 2,500 1, ,00 4,090 2, Dimensions and data shown may be changed without prior notice

47 Acid, Chemical & Multipurpose 953AE General purpose 20 bar (300 psi) - EPDM Tube: Black EPDM Reforcement: High tensile textile cords Cover: Blue EPDM - abrasion and ozone resistant Use: Air, water and mild chemicals delivery Safety factor: 4:1 Temperature: -30 C +80 C (-22 F +176 F) Recoended fittg, page: Refer to hydraulic catalogue Combation nipple with pre-crimped ferrule...72 ch ch bar psi ch % kg/m lb/ft 13 1/2 23 0, ,350 0, /4 31 1, ,580 0, , ,730 0, /2 52 2, ,070 0, , ,880 1, , ,800 1, AH Multipurpose 20 bar (300 psi) non conductive Tube: Black non conductive NBR Reforcement: High tensile textile cords Cover: Red NBR/PVC - abrasion, ozone and hydrocarbon resistant Use: Premium quality compressed air, water, fuel and oil delivery general dustrial applications Safety factor: 3:1 Temperature: -30 C +80 C (-22 F +176 F) Recoended fittg, page: Refer to hydraulic catalogue 15NAK Nitrogen 20 bar (300 psi) - heavy duty Tube: Black SBR/NBR - oil mist resistant Reforcement: High tensile textile cords Cover: Yellow SBR - abrasion and ozone resistant. P-pricked Use: Specially designed for delivery of nitrogen and ert gases heavy duty applications Safety factor: <= 51 3:1 >=63 2,5:1 Temperature: -30 C +80 C (-22 F +176 F) Recoended fittg, page: Refer to hydraulic catalogue - NPTF Male ch ch bar psi ch % kg/m lb/ft /4 44 1, ,990 0, /2 50 1, ,150 0, , ,510 1,015 ch ch bar psi ch % kg/m lb/ft 19 3/4 29 1, ,560 0, , ,700 0, /4 44 1, ,890 0, /2 50 1, ,040 0,700 fittgs 45 Dimensions and data shown may be changed without notice

48

49 HOSE UMBILICAL UMBILICAL...48

50 fittgs Umbilical UMBILICAL Custom-made bundle of s and/or electrical cables Applications: Subsea divg Oil well tervention Land control BOP Cover: Polyurethane or PVC 48 Dimensions and data shown may be changed without prior notice

51 HOSE SEISMIC 250AK Seismic 5 bar (75 psi) SAH Seismic extra 10 bar (150 psi) OFF SHORE - ROV OPERATION 350 bar (5000 psi) R8 MARINE 140 to 420 bar (2000 to 6000 psi)... 51

52 Seismic 250AK Seismic 5 bar (75 psi) Tube: Black EPDM Reforcement: High tensile textile cords Cover: Yellow EPDM with silver steipes - abrasion and ozone resistant Use: Flotation buoy seismic monitorg operations Safety factor: 3:1 Temperature: -30 C +80 C (-22 F +176 F) ch ch bar psi ch % kg/m lb/ft , ,810 5, , ,815 11,283 25SAH Seismic extra 10 bar (150 psi) Tube: Black EPDM Reforcement: High tensile textile cords Cover: Red EPDM - abrasion and sea-water resistant Use: Cable protection seismic operations Safety factor: 3:1 Temperature: -30 C +80 C (-22 F +176 F) ch ch bar psi ch % kg/m lb/ft , ,750 4, , ,390 5, , ,240 7,555 fittgs 50 Dimensions and data shown may be changed without prior notice

53 Seismic OFF SHORE - ROV OPERATION Mare high pressure hydraulic 350 bar (5000 psi) Tube: Oil and biodegradable hydraulic fluid resistant polyamide 11 methanol washed Reforcement: High tensile aramid reforcement Cover: Oil, water and ozone resistant polyurethane, non-p-pricked Use: Mare and off-shore equipment, ROVs (remotely operated vehicles), BOP valves. Suitable for off-shore seismic monitorg operations. Manufactured accordg to API 17E / ISO Safety factor: 4:1 Temperature: -40 C to +100 C (-40 F to +212 F) limited to +70 C (+158 F) for air and water based fluids Recoended fittgs: AISI 316 SS: NPTF male, JIC female and male Dash MPa psi MPa psi kg/m lb/ft /16 9,6 0,378 35, , ,18 0,060 0, ,5 1/4 12,1 0,476 35, , ,97 0,090 0, ,7 3/8 17,1 0,673 35, , ,36 0,170 0, /2 21,9 0,862 35, , ,15 0,250 0, ,5 3/4 29,6 1,165 35, , ,91 0,400 0, ,9 1 38,9 1,531 35, , ,87 0,630 0,425 Also available the 3000 psi version R8 MARINE Mare high pressure hydraulic from 140 to 420 bar (2000 to 6000 psi) Tube: Oil and biodegradable hydraulic fluid resistant polyester Reforcement: High tensile aramid reforcement Cover: Oil, water and ozone resistant polyurethane, p-pricked Use: Mare and off-shore equipment, cranes, mare, transport systems. Off-shore seismic monitorg operations. Also recoended for general on-shore equipment, high humidity environment. Meets or exceeds SAE 100R8 Safety factor: 4:1 Temperature: -40 C to +100 C (-40 F to +212 F) limited to +70 C (+158 F) for air and water based fluids fittgs Recoended fittgs: AISI 316 SS: NPTF male, JIC female and male Dash MPa psi MPa psi kg/m lb/ft /16 8,9 0,35 35, , ,18 0,050 0, ,5 1/4 11,5 0,453 35, , ,97 0,080 0, ,1 5/16 13,4 0,528 30, , ,17 0,105 0, ,7 3/8 15,5 0,61 28, , ,36 0,130 0, /2 19,9 0,783 24, , ,15 0,195 0, ,3 5/8 23,4 0,921 20, , ,92 0,245 0, ,5 3/4 26,9 1,059 16, , ,91 0,310 0, ,9 1 34,2 1,346 14, , ,87 0,425 0, Dimensions and data shown may be changed without notice

54

55 HOSE WATERBLAST WATERBLAST WB WATERBLAST WB WATERBLAST WB

56 Waterblast WATERBLAST Tube: Oil, biodegradable hydraulic fluid and water resistant synthetic rubber Reforcement: High tensile steel spirals Cover: Oil, water and ozone resistant synthetic rubber Application: High pressure water jettg Temperature: -10 C +70 C (+14 F +158 F) Safety Factor: 2.5:1 Recoended fittg, page: Waterblast Fittg...84 WATERBLAST WB10 Dash MPa psi MPa psi kg/m lb/ft /2 23,0 0, ,54 0,75 0, /4 31,4 1, ,27 1,47 0, ,8 1, ,84 1,03 1,37 WATERBLAST WB15 Dash MPa psi MPa psi kg/m lb/ft /8 21,4 0, ,85 0, /2 25,4 1, ,26 0, /4 31,8 1, ,78 1,20 fittgs WATERBLAST WB20 Dash MPa psi MPa psi kg/m lb/ft /2 29,5 1, ,75 1, Dimensions and data shown may be changed without prior notice

57 HOSE HYDRAULIC HOSE FLEXOPAK 2 - MINETUFF AT5K - MINETUFF...57 AT6K - MINETUFF...57 AT7K - MINETUFF...57 ALFABIOTECH MINETUFF...58 ALFABIOTECH MINETUFF ALFABIOTECH MINETUFF ALFABIOTECH MINETUFF ALFABIOTECH 5000 PLUS - MINETUFF ALFABIOTECH MINETUFF... 60

58 Hydraulic Hose FLEXOPAK 2 - MINETUFF ISO SAE 100 R16S EN 857 2SC (up to 1 ) Tube: Oil and biodegradable hydraulic fluid resistant synthetic rubber Reforcement: High tensile steel braids Cover: Abrasion, ozone and hydrocarbon resistant synthetic rubber. MSHA APPROVED Application: High pressure hydraulic les. Also suitable for fuel oil, anti-freeze solutions, air and water Temperature: -40 C +100 C (-40 F +212 F) air max T = +70 C (+160 F) Length: Random up to 1 1/4 61 m (200 ft) from 1 1/2 to 3 Recoended fittg: Refer to hydraulic or Alfacrimp One-Piece catalogue Contact our offices for -40 and -48 connections. fittgs Constr. Dash Mpa psi Mpa psi kg/m lb/ft 2B /4 13,2 0, ,28 0,19 2B /16 14,8 0, ,2 0,30 0,20 2B /8 17,4 0, ,5 0,39 0,26 2B /2 20,7 0, ,5 0,52 0,35 2B /8 23,7 0, ,60 0,40 2B /4 27,6 1, ,8 0,80 0,54 2B ,6 1, ,22 0,82 2B /4 43,3 1,70 14, ,3 1,50 1,01 2B /2 50,9 2,00 12, ,9 1,97 1,32 2B ,9 2, ,6 2,55 1,71 2B /2 76,5 3,00 7, ,3 3,04 2,04 2B ,2 3, ,6 4,08 2, Dimensions and data shown may be changed without prior notice

59 Hydraulic Hose AT5K - MINETUFF 1,000,000 impulse cycles* Tube: oil resistant synthetic rubber. Reforcement: six high tensile steel spirals (6S). Cover: abrasion, ozone and hydrocarbon resistant synthetic rubber. MSHA APPROVED Application: very high pressure hydraulic les, fuel oil, antifreeze solutions, air and water. Constant operation: -40 C +121 C (-40 F +250 F) Length: 61 m (200 ft) Recoended fittg: Contact our offices for connections. Dash Mpa psi Mpa psi kg/m ib/c ft /2 83,4 3, ,2 8, AT6K - MINETUFF 1,000,000 cycles tested Tube: oil resistant synthetic rubber. Reforcement: six high tensile steel spirals (6S). Cover: abrasion, ozone and hydrocarbon resistant synthetic rubber. MSHA APPROVED Application: very high pressure hydraulic les, fuel oil, antifreeze solutions, air and water. Constant operation: -40 C +121 C (-40 F +250 F) Length: 61 m (200 ft) Recoended fittg: Refer to hydraulic or Alfacrimp One-Piece catalogue fittgs Dash Mpa psi Mpa psi kg/m lb/c ft ,0 2, ,0 7, AT7K - MINETUFF 1,000,000 cycles tested Tube: oil resistant synthetic rubber. Reforcement: six high tensile steel spirals (6S). Cover: abrasion, ozone and hydrocarbon resistant synthetic rubber. MSHA APPROVED Application: very high pressure hydraulic les, fuel oil, antifreeze solutions, air and water. Constant operation: -40 C +121 C (-40 F +250 F) Length: 61 m (200 ft) Recoended fittg: Refer to hydraulic or Alfacrimp One-Piece catalogue Dash Mpa psi Mpa psi kg/m ib/c ft /4 50,4 1,98 52, ,5 3, /2 57,3 2, ,7 5, Dimensions and data shown may be changed without notice

60 Hydraulic Hose ALFABIOTECH MINETUFF ISO Tube: oil resistant synthetic rubber and biodegradable hydraulic fluids Reforcement: four high tensile steel spirals (4S) Cover: abrasion, ozone and hydrocarbon resistant synthetic rubber. MSHA APPROVED Application: developed to withstand very demandg conditions very high performance pressure, pulsg and flexg. Temperature: -40 C +121 C (-40 F +250 F) Length: 61 m from 1 1/4 to 2-30,5 m for 2 1/2 Recoended fittg: Contact our offices for connections. Item code Dash Mpa psi Mpa psi kg/m lb/ ft /2 79 3, ,35 4,63 3, ,5 3, ,07 5,40 3,63 fittgs ALFABIOTECH MINETUFF ISO Tube: Oil and biodegradable hydraulic fluid resistant synthetic rubber Reforcement: High tensile steel spirals (4S/6S) Cover: Abrasion, ozone and hydrocarbon resistant synthetic rubber. MSHA APPROVED. Application: Very high pressure hydraulic les. Also suitable for fuel oil, anti-freeze solutions, air and water. Special compact construction designed to operate at tight bend radius demandg applications Temperature: -40 C +121 C (-40 F +250 F) air max T = +70 C (+160 F) Length: 61 m (200 ft) Recoended fittg: Refer to hydraulic or Alfacrimp One-Piece catalogue Contact our offices for -40 and -48 connections. Item code Constr. Dash ch Mpa psi Mpa psi ch kg/m lb/ ft S /4 45,7 1, ,06 2,25 1, S /2 51,8 2, ,54 2,76 1, S ,6 3, ,43 7,95 5, Dimensions and data shown may be changed without prior notice

61 Hydraulic Hose ALFABIOTECH MINETUFF ISO Tube: Oil and biodegradable hydraulic fluid resistant synthetic rubber Reforcement: High tensile steel spirals (4S) Cover: Abrasion, ozone and hydrocarbon resistant synthetic rubber. MSHA APPROVED. Application: Very high pressure hydraulic les. Also suitable for fuel oil, anti-freeze solutions, air and water. Special compact construction designed to operate at tight bend radius demandg applications Temperature: -40 C +121 C (-40 F +250 F) air max T = +70 C (+160 F) Length: Random up to 1-61 m (200 ft) from 1 1/4 to 2 Recoended fittg: Refer to hydraulic or Alfacrimp One-Piece catalogue Item code Dash ch Mpa psi Mpa psi ch kg/m lb/ft /4 29,5 1, ,72 1,23 0, ,5 1, ,91 1,60 1, /4 45,5 1, ,24 2,25 1, /2 51,8 2, ,54 2,86 1, ,8 2, ,87 4,47 3,00 ALFABIOTECH MINETUFF ISO Tube: Oil and biodegradable hydraulic fluid resistant synthetic rubber Reforcement: High tensile steel spirals (4S/6S) Cover: Abrasion,ozone and hydrocarbon resistant synthetic rubber. MSHA APPROVED. Application: Very high pressure hydraulic les. Also suitable for fuel oil, anti-freeze solutions, air and water. Special compact construction designed to operate at tight bend radius demandg applications Temperature: -40 C +121 C (-40 F +250 F) air max T = +70 C (+160 F) Length: Random up to 1-61 m (200 ft) from 1 1/4 to 2 1/2 fittgs Recoended fittg: Refer to hydraulic or Alfacrimp One-Piece catalogue Contact our offices for -40 and -48 connections. Item code Constr. Dash ch Mpa psi Mpa psi ch kg/m lb/ft S /8 25,9 1, ,51 0,87 0, S /4 31,0 1, ,90 1,23 0, S ,8 1, ,09 1,68 1, S /4 44,4 1, ,02 2,27 1, S /2 56,5 2, ,69 4,48 3, S ,2 2, ,65 6,26 4, S ,6 3, ,5* ,43 7,95 5, Dimensions and data shown may be changed without notice

62 Hydraulic Hose ALFABIOTECH 5000 PLUS - MINETUFF ISO Tube: Oil and biodegradable hydraulic fluid resistant synthetic rubber Reforcement: High tensile steel spirals (4S) Cover: Abrasion, ozone and hydrocarbon resistant synthetic rubber. MSHA APPROVED. Application: Very high pressure hydraulic les. Also suitable for fuel oil, anti-freeze solutions, air and water. Special compact construction designed to operate at tight bend radius demandg applications Temperature: -40 C +121 C (-40 F +250 F) air max T = +70 C (+160 F) Length: Random Recoended fittg: Refer to hydraulic or Alfacrimp One-Piece catalogue Item code Dash ch Mpa psi Mpa psi ch kg/m lb/ft /4 32,0 1, ,09 1,228 0, ,2 1, ,27 1,934 1,30 fittgs ALFABIOTECH MINETUFF ISO Tube: Oil and biodegradable hydraulic fluid resistant synthetic rubber Reforcement: High tensile steel spirals (4S/6S) Cover: Abrasion, ozone and hydrocarbon resistant synthetic rubber. MSHA APPROVED. Application: Very high pressure hydraulic les. Also suitable for fuel oil, anti-freeze solutions, air and water. Special compact construction designed to operate at tight bend radius demandg applications Temperature: -40 C +121 C (-40 F +250 F) air max T = +70 C (+160 F) Length: Random up to 1-61 m (200 ft) from 1 1/4 to 2 Recoended fittg: Refer to hydraulic or Alfacrimp One-Piece catalogue Item code Constr. Dash ch Mpa psi Mpa psi ch kg/m lb/ft S /4 16,9 0, ,36 0,47 0, S /8 19,9 0,78 44, ,95 0,55 0, S /2 23,0 0, ,54 0,75 0, S /8 28,0 1, ,09 1,19 0, S /4 31,2 1, ,27 1,47 0, S ,8 1, ,02 2,03 1, S /4 46,1 1, ,52 2,92 1, S /4 49,4 1, ,52 3,47 2, S /2 56,5 2, ,05 4,48 3, Dimensions and data shown may be changed without prior notice

63 FITTINGS INDUSTRIAL FITTINGS CLAW COUPLING GROUND JOINT SEAL CAM & GROOVE COMBINATION NIPPLE HAMMER LUG UNION DRY-DISCONNECT AND SAFETY BREAK-AWAY COUPLING FLANGED FITTING BUILT-IN FITTING COMPOSITE HOSE FITTING

64 Claw Couplg TYPE B CLAW COUPLING (U.S. TYPE) Hose shank - Gasket Included Part Number Claw Distance Internal Claw Distance External I919K / MALLEABLE IRON I919K / MALLEABLE IRON I919K / MALLEABLE IRON I919K MALLEABLE IRON I919K / MALLEABLE IRON 4 LUG TYPE I919K / MALLEABLE IRON 4 LUG TYPE I919K MALLEABLE IRON 4 LUG TYPE Note I319K / S/S I319K / S/S I319K S/S 316 TO ASSEMBLE THE INSERT USE CLAW CLAMP OR CRIMPING RING TYPE B CLAW COUPLING (U.S. TYPE) Male NPT - Gasket Included fittgs type Claw Distance Internal Claw Distance External I9A9K /4 NPT MALLEABLE IRON I9A9K /8 NPT MALLEABLE IRON I9A9K /2 NPT MALLEABLE IRON I9A9K /4 NPT MALLEABLE IRON I9A9K NPT MALLEABLE IRON I3A9K /2 NPT S/S I3A9K /4 NPT S/S I3A9K NPT S/S 316 TYPE B CLAW COUPLING (U.S. TYPE) Female NPT - Gasket Included Part Number type Claw Distance Internal Claw Distance External I9A9K /4 NPT MALLEABLE IRON I9A9K /8 NPT MALLEABLE IRON I9A9K /2 NPT MALLEABLE IRON I9A9K /4 NPT MALLEABLE IRON I9A9K NPT MALLEABLE IRON I9A9K /4 NPT MALLEABLE IRON 4 LUG TYPE I9A9K /2 NPT MALLEABLE IRON 4 LUG TYPE I9A9K NPT MALLEABLE IRON 4 LUG TYPE Note I3A9K /2 NPT S/S I3A9K /4 NPT S/S I3A9K NPT S/S Dimensions and data shown may be changed without prior notice

65 Claw Couplg TYPE B CLAW COUPLING (U.S. TYPE) Blank cap Claw Distance Internal Claw Distance External I9A9K MALLEABLE IRON I3A9K S/S 316 TYPE B CLAW COUPLING (U.S. TYPE) Safety p I1YC4001 PLATED STEEL TYPE B CLAW COUPLING (U.S. TYPE) Claw clamps CRIMPING RING Hose OD m Hose OD max I9LG2B / ,0 30,0 MALLEABLE IRON I9LG2B / ,0 33,0 MALLEABLE IRON I9LG2B ,0 45,0 MALLEABLE IRON fittgs Rg ID Rg OD Rg L R5YBFF ALUMINIUM R5YBFF ALUMINIUM R5YBFF ALUMINIUM R5YBFF ALUMINIUM R5YBFF ALUMINIUM R5YBFF ALUMINIUM R5YBFF ALUMINIUM R5YBFF ALUMINIUM TYPE B CLAW COUPLING (U.S. TYPE) Hose shank with Precrimped ferrule - Gasket Included Part Number Claw Distance Internal Claw Distance External Hose OD m-max I319KL / ,9-34,1 S/S Dimensions and data shown may be changed without notice

66 Ground Jot Seal GROUND JOINT SEAL Complete couplg BSP Type I918B /2 13 1/2 BSP MALLEABLE IRON I918B /4 19 3/4 BSP MALLEABLE IRON I918B BSP MALLEABLE IRON I918B / /4 BSP MALLEABLE IRON I918B / /2 BSP MALLEABLE IRON I918B BSP MALLEABLE IRON I918B / /2 BSP MALLEABLE IRON I918B BSP MALLEABLE IRON I918B BSP MALLEABLE IRON GROUND JOINT SEAL Complete couplg NPT fittgs GROUND JOINT SEAL Male BSP - Hose shank Type I918B /2 13 1/2 NPT MALLEABLE IRON I918B /4 19 3/4 NPT MALLEABLE IRON I918B NPT MALLEABLE IRON I918B / /4 NPT MALLEABLE IRON I918B / /2 NPT MALLEABLE IRON I918B NPT MALLEABLE IRON I918B / /2 NPT MALLEABLE IRON I918B NPT MALLEABLE IRON I918B NPT MALLEABLE IRON Type I118B /2 13 1/2 BSP PLATED STEEL I118B /4 19 3/4 BSP PLATED STEEL I118B BSP PLATED STEEL I918B / /4 BSP MALLEABLE IRON I918B / /2 BSP MALLEABLE IRON I918B BSP MALLEABLE IRON I918B / /2 BSP MALLEABLE IRON I918B BSP MALLEABLE IRON I918B BSP MALLEABLE IRON GROUND JOINT SEAL Male NPT - Hose shank Type I918B /2 13 1/2 NPT MALLEABLE IRON I918B /4 19 3/4 NPT MALLEABLE IRON I918B NPT MALLEABLE IRON I918B / /4 NPT MALLEABLE IRON I918B / /2 NPT MALLEABLE IRON I918B NPT MALLEABLE IRON I918B / /2 NPT MALLEABLE IRON I918B NPT MALLEABLE IRON I918B NPT MALLEABLE IRON 64 Dimensions and data shown may be changed without prior notice

67 Ground Jot Seal GROUND JOINT SEAL Clamps - 2 Bolt - 2 Grippg fger type Hose OD M Hose OD Max I9LG2F / MALLEABLE IRON I9LG2F / MALLEABLE IRON I9LG2F / MALLEABLE IRON GROUND JOINT SEAL Clamps - 4 Bolt - 2 Grippg fger type Hose OD M Hose OD Max I9LG4F ,5 40 MALLEABLE IRON I9LG4F ,5 MALLEABLE IRON I9LG4F / ,5 MALLEABLE IRON I9LG4F / MALLEABLE IRON I9LG4F / ,5 60 MALLEABLE IRON I9LG4F MALLEABLE IRON I9LG4F / ,5 87,5 MALLEABLE IRON I9LG4F MALLEABLE IRON 4 GRIPPING FINGER GROUND JOINT SEAL Clamps - 6 Bolt - 3 Grippg fger type Hose OD M Hose OD Max I9LG6F ,5 127 MALLEABLE IRON I9LG6F ,5 142 MALLEABLE IRON fittgs 65 Dimensions and data shown may be changed without notice

68 Cam & Groove CAM & GROOVE MIL C Type A - Adapter, female BSP type Head DN Head DN I5A9C /2 BSP 1/2 13 ALUMINIUM I5A9C /4 BSP 3/4 19 ALUMINIUM I5A9C BSP 1 25 ALUMINIUM I5A9C /4 BSP 1 1/4 32 ALUMINIUM I5A9C /2 BSP 1 1/2 38 ALUMINIUM I5A9C BSP 2 51 ALUMINIUM I5A9C /2 BSP 2 1/2 63 ALUMINIUM I5A9C BSP 3 76 ALUMINIUM I5A9C BSP ALUMINIUM I5A9C BSP ALUMINIUM I5A9C BSP ALUMINIUM fittgs type Head DN Head DN I3A9C /2 BSP 1/2 13 S/S I3A9C /4 BSP 3/4 19 S/S I3A9C BSP 1 25 S/S I3A9C /4 BSP 1 1/4 32 S/S I3A9C /2 BSP 1 1/2 38 S/S I3A9C BSP 2 51 S/S I3A9C /2 BSP 2 1/2 63 S/S I3A9C BSP 3 76 S/S I3A9C BSP S/S I3A9C BSP S/S 316 type Head DN Head DN I8A9C /2 BSP 1/2 13 BRASS I8A9C /4 BSP 3/4 19 BRASS I8A9C BSP 1 25 BRASS I8A9C /4 BSP 1 1/4 32 BRASS I8A9C /2 BSP 1 1/2 38 BRASS I8A9C BSP 2 51 BRASS I8A9C /2 BSP 2 1/2 63 BRASS I8A9C BSP 3 76 BRASS I8A9C BSP BRASS type Head DN Head DN IPA9C /2 BSP 1/2 13 PP IPA9C /4 BSP 3/4 19 PP IPA9C BSP 1 25 PP IPA9C /4 BSP 1 1/4 32 PP IPA9C /2 BSP 1 1/2 38 PP IPA9C BSP 2 51 PP IPA9C BSP 3 76 PP IPA9C BSP PP 66 Dimensions and data shown may be changed without prior notice

69 Cam & Groove CAM & GROOVE MIL C Type A - Adapter, female NPT type Head DN Head DN I5A9C /2 NPT 1/2 13 ALUMINIUM I5A9C /4 NPT 3/4 19 ALUMINIUM I5A9C NPT 1 25 ALUMINIUM I5A9C /4 NPT 1 1/4 32 ALUMINIUM I5A9C /2 NPT 1 1/2 38 ALUMINIUM I5A9C NPT 2 51 ALUMINIUM I5A9C /2 NPT 2 1/2 63 ALUMINIUM I5A9C NPT 3 76 ALUMINIUM I5A9C NPT ALUMINIUM I5A9C NPT ALUMINIUM I5A9C NPT ALUMINIUM I5A9C NPT ALUMINIUM type Head DN Head DN I3A9C /2 NPT 1/2 13 S/S I3A9C /4 NPT 3/4 19 S/S I3A9C NPT 1 25 S/S I3A9C /4 NPT 1 1/4 32 S/S I3A9C /2 NPT 1 1/2 38 S/S I3A9C NPT 2 51 S/S I3A9C /2 NPT 2 1/2 63 S/S I3A9C NPT 3 76 S/S I3A9C NPT S/S I3A9C NPT S/S I3A9C NPT S/S I3A9C NPT S/S 316 fittgs type Head DN Head DN I8A9C /2 NPT 1/2 13 BRASS I8A9C /4 NPT 3/4 19 BRASS I8A9C NPT 1 25 BRASS I8A9C /4 NPT 1 1/4 32 BRASS I8A9C /2 NPT 1 1/2 38 BRASS I8A9C NPT 2 51 BRASS I8A9C /2 NPT 2 1/2 63 BRASS I8A9C NPT 3 76 BRASS I8A9C NPT BRASS I8A9C NPT BRASS I8A9C NPT BRASS type Head DN Head DN IPA9C /2 NPT 1/2 13 PP IPA9C /4 NPT 3/4 19 PP IPA9C NPT 1 25 PP IPA9C /4 NPT 1 1/4 32 PP IPA9C /2 NPT 1 1/2 38 PP IPA9C NPT 2 51 PP IPA9C NPT 3 76 PP IPA9C NPT PP 67 Dimensions and data shown may be changed without notice

70 Cam & Groove CAM & GROOVE MIL C Type D - Coupler, female BSP type Head DN Head DN I5A9C /2 BSP 1/2 13 ALUMINIUM I5A9C /4 BSP 3/4 19 ALUMINIUM I5A9C BSP 1 25 ALUMINIUM I5A9C /4 BSP 1 1/4 32 ALUMINIUM I5A9C /2 BSP 1 1/2 38 ALUMINIUM I5A9C BSP 2 51 ALUMINIUM I5A9C /2 BSP 2 1/2 63 ALUMINIUM I5A9C BSP 3 76 ALUMINIUM I5A9C BSP ALUMINIUM I5A9C BSP ALUMINIUM I5A9C BSP ALUMINIUM fittgs type Head DN Head DN I3A9C /2 BSP 1/2 13 S/S I3A9C /4 BSP 3/4 19 S/S I3A9C BSP 1 25 S/S I3A9C /4 BSP 1 1/4 32 S/S I3A9C /2 BSP 1 1/2 38 S/S I3A9C BSP 2 51 S/S I3A9C /2 BSP 2 1/2 63 S/S I3A9C BSP 3 76 S/S I3A9C BSP S/S I3A9C BSP S/S 316 type Head DN Head DN I8A9C /2 BSP 1/2 13 BRASS I8A9C /4 BSP 3/4 19 BRASS I8A9C BSP 1 25 BRASS I8A9C /4 BSP 1 1/4 32 BRASS I8A9C /2 BSP 1 1/2 38 BRASS I8A9C BSP 2 51 BRASS I8A9C /2 BSP 2 1/2 63 BRASS I8A9C BSP 3 76 BRASS I8A9C BSP BRASS type Head DN Head DN IPA9C /2 BSP 1/2 13 PP IPA9C /4 BSP 1/4 19 PP IPA9C BSP 1 25 PP IPA9C /4 BSP 1 1/4 32 PP IPA9C /2 BSP 1 1/2 38 PP IPA9C BSP 2 51 PP IPA9C BSP 3 76 PP IPA9C BSP PP 68 Dimensions and data shown may be changed without prior notice

71 Cam & Groove CAM & GROOVE MIL C Type D - Coupler, female NPT type Head DN Head DN I5A9C /2 NPT 1/2 13 ALUMINIUM I5A9C /4 NPT 3/4 19 ALUMINIUM I5A9C NPT 1 25 ALUMINIUM I5A9C /4 NPT 1 1/4 32 ALUMINIUM I5A9C /2 NPT 1 1/2 38 ALUMINIUM I5A9C NPT 2 51 ALUMINIUM I5A9C /2 NPT 2 1/2 63 ALUMINIUM I5A9C NPT 3 76 ALUMINIUM I5A9C NPT ALUMINIUM I5A9C NPT ALUMINIUM I5A9C NPT ALUMINIUM I5A9C NPT ALUMINIUM type Head DN Head DN I3A9C /2 NPT 1/2 13 S/S I3A9C /4 NPT 3/4 19 S/S I3A9C NPT 1 25 S/S I3A9C /4 NPT 1 1/4 32 S/S I3A9C /2 NPT 1 1/2 38 S/S I3A9C NPT 2 51 S/S I3A9C /2 NPT 2 1/2 63 S/S I3A9C NPT 3 76 S/S I3A9C NPT S/S I3A9C NPT S/S I3A9C NPT S/S 316 fittgs type Head DN Head DN I8A9C /2 NPT 1/2 13 BRASS I8A9C /4 NPT 3/4 19 BRASS I8A9C NPT 1 25 BRASS I8A9C /4 NPT 1 1/4 32 BRASS I8A9C /2 NPT 1 1/2 38 BRASS I8A9C NPT 2 51 BRASS I8A9C /2 NPT 2 1/2 63 BRASS I8A9C NPT 3 76 BRASS I8A9C NPT BRASS I8A9C NPT BRASS I8A9C NPT BRASS type Head DN Head DN IPA9C /2 NPT 1/2 13 PP IPA9C /4 NPT 1/4 19 PP IPA9C NPT 1 25 PP IPA9C /4 NPT 1 1/4 32 PP IPA9C /2 NPT 1 1/2 38 PP IPA9C NPT 2 51 PP IPA9C NPT 3 76 PP IPA9C NPT PP 69 Dimensions and data shown may be changed without notice

72 Cam & Groove CAM & GROOVE MIL C Type DC - Female dust cap for adapter Head DN Head DN I5A9C /2 13 ALUMINIUM I5A9C /4 19 ALUMINIUM I5A9C ALUMINIUM I5A9C /4 32 ALUMINIUM I5A9C /2 38 ALUMINIUM I5A9C ALUMINIUM I5A9C /2 63 ALUMINIUM I5A9C ALUMINIUM I5A9C ALUMINIUM I5A9C ALUMINIUM I5A9C ALUMINIUM I5A9C ALUMINIUM fittgs Head DN Head DN I3A9C /2 13 S/S I3A9C /4 19 S/S I3A9C S/S I3A9C /4 32 S/S I3A9C /2 38 S/S I3A9C S/S I3A9C /2 63 S/S I3A9C S/S I3A9C S/S I3A9C S/S I3A9C S/S 316 Head DN Head DN I8A9C /2 13 BRASS I8A9C /4 19 BRASS I8A9C BRASS I8A9C /4 32 BRASS I8A9C /2 38 BRASS I8A9C BRASS I8A9C /2 63 BRASS I8A9C BRASS I8A9C BRASS I8A9C BRASS I8A9C BRASS Head DN Head DN IPA9C /2 13 PP IPA9C /4 19 PP IPA9C PP IPA9C /4 32 PP IPA9C /2 38 PP IPA9C PP IPA9C PP IPA9C PP 70 Dimensions and data shown may be changed without prior notice

73 Cam & Groove CAM & GROOVE MIL C Type DP - Male dust plug for coupler Head DN Head DN I5A9C /2 13 ALUMINIUM I5A9C /4 19 ALUMINIUM I5A9C ALUMINIUM I5A9C /4 32 ALUMINIUM I5A9C /2 38 ALUMINIUM I5A9C ALUMINIUM I5A9C /2 63 ALUMINIUM I5A9C ALUMINIUM I5A9C ALUMINIUM I5A9C ALUMINIUM I5A9C ALUMINIUM Head DN Head DN I3A9C /2 13 S/S I3A9C /4 19 S/S I3A9C S/S I3A9C /4 32 S/S I3A9C /2 38 S/S I3A9C S/S I3A9C /2 63 S/S I3A9C S/S I3A9C S/S I3A9C S/S 316 Head DN Head DN I8A9C /2 13 BRASS I8A9C /4 19 BRASS I8A9C BRASS I8A9C /4 32 BRASS I8A9C /2 38 BRASS I8A9C BRASS I8A9C /2 63 BRASS I8A9C BRASS I8A9C BRASS I8A9C BRASS I8A9C BRASS fittgs Head DN Head DN IPA9C /2 13 PP IPA9C /4 19 PP IPA9C PP IPA9C /4 32 PP IPA9C /2 38 PP IPA9C PP IPA9C PP IPA9C PP 71 Dimensions and data shown may be changed without notice

74 Combation Nipple COMBINATION NIPPLE Male NPT complete with pre-crimped ferrule - heavy duty type Hose OD m-max I1728M NPT PLATED STEEL I1728M NPT PLATED STEEL I1728M NPT PLATED STEEL I1728M NPT PLATED STEEL Staless Steel version available on request FOR MALE NPT FITTING DN<76, PLEASE REFER TO HYDRAULIC RANGE H , RECOMMENDED WITH HYDRAULIC FERRULE H COMBINATION NIPPLE Male BSPT complete with pre-crimped ferrule - heavy duty type Hose OD m-max I1707M BSPT PLATED STEEL I1707M BSPT PLATED STEEL I1707M BSPT PLATED STEEL I1707M BSPT PLATED STEEL fittgs Staless Steel version available on request FOR MALE BSPT FITTING DN<76, PLEASE REFER TO HYDRAULIC RANGE H , RECOMMENDED WITH HYDRAULIC FERRULE H COMBINATION NIPPLE Hose mender FOR DN<76 PLEASE REFER TO HYDRAULIC RANGE. FOR HIGHER DIAMETERS, HOSE MENDERS WITH PRE-CRIMPED FERRULE ARE AVAILABLE ON REQUEST Dimensions and data shown may be changed without prior notice

75 Haer Lug Union HAMMER LUG UNION - FIG. 100 NPT ed - 3 Pieces (female/male/nut) Colour: Black nut, yellow subs Use: Recoended for air, water and oil services up to 1000 psi manifold and le connections Sealg: Metal to metal sealg surface Pressure (cold workg): psi NPT I1TC66C ASTM A-105 Forged Carbon Steel I1TC66C ASTM A-105 Forged Carbon Steel I1TC66C ASTM A-105 Forged Carbon Steel I1TC66C ASTM A-105 Forged Carbon Steel I1TC66C ASTM A-105 Forged Carbon Steel HAMMER LUG UNION - FIG. 200 NPT ed - 3 Pieces (female/male/nut) Colour: Blue nut, grey subs Use: Recoended for air, water and oil services up to 2000 psi manifold and le connections Sealg: Metal to metal sealg surface Pressure (cold workg): psi HAMMER LUG UNION - FIG. 602 NPT ed - 3 Pieces (female/male/nut) Colour: Black nut, orange subs Use: Recoended for water, oil, gas and mud services up to 6000 psi Sealg: Replaceable, Lip type rubber seal provides primary sealg Pressure (cold workg): psi NPT I1TC96C ASTM A-105 Forged Carbon Steel I1TC96C ASTM A-105 Forged Carbon Steel I1TC96C ASTM A-105 Forged Carbon Steel I1TC96C ASTM A-105 Forged Carbon Steel fittgs NPT I1TE26E Alloy Steel AISI I1TE26E Alloy Steel AISI I1TE26E Alloy Steel AISI I1TE26E Alloy Steel AISI 1040 HAMMER LUG UNION - FIG NPT ed - 3 Pieces (female/male/nut) Colour: Blue nut, red subs Use: Recoended for cementg, acidizg, fracturg, testg and choke and kill les Sealg: Replaceable Lip type rubber seal Pressure (cold workg): psi NPT I1TE16E Alloy Steel AISI I1TE16E Alloy Steel AISI I1TE16E Alloy Steel AISI Dimensions and data shown may be changed without notice

76 Dry-Disconnect and Safety Break-Away Couplg DRY DISCONNECT COUPLING Alfagoa offers a wide range of dry disconnect couplgs. Major offshore exploration, chemical and petro chemical companies rely on dry-disconnect couplgs to safely transfer their most aggressive, hazardous or valuable liquids. Designed for safety and ease of use with mimum operator tervention, the self sealg design of the couplgs guarantees both the maximum level of safety and the fastest way of connectg-disconnectg. The stallation of dry-disconnect couplgs can transform your operation by offerg the followg benefits: Accidental spillage elimated Time savg, no need to dra s or pipe systems Reduces the possibility of human error transfer operations Improves efficiency 2 Dry-Disconnect Dimensions: DN40 - DN50, Ø70 s: Alumium alloy, Staless Steel, brass, Hastelloy, others on request Seals: A full range of elastomeric seals available. Connections: BSP, NPT, Flanged 2 couplg size probably covers the most diverse selection of applications. Available a range of material and connection configurations, drydisconnect 2 couplg is designed for quick and safe transfers. Offshore chemical dosg and aggressive chemical vapour transfer are just some of the challengg applications theese couplgs are designed for. fittgs 4 Dry-Disconnect Dimensions: DN 100, ø 164 s: Alumium alloy, Staless Steel, brass, Hastelloy, others on request Seals: A full range of elastomeric seals available. Connections: BSP, NPT, Flanged 4 couplg is extensively used for offshore ship to rig transfers of fuels and drkg water, aviation fuel bunkerg, rail tank loadg/discharge, chemicals etc. Fast, positive connection and disconnection make dry-disconnect 4 couplg the standard for barge to ferry re-fuellg and multiple rail tank discharge. 6 Dry-Disconnect Dimensions: DN 150, ø 238 s: Alumium alloy, Staless Steel, brass, Hastelloy, others on request Seals: A full range of elastomeric seals available. Connections: BSP, NPT, Flanged 6 couplg is the ideal ship/barge to shore connection. Much faster and safer than any flange couplg means not only environmental standards compliance but real turn around time savgs. Full mare construction with rotatg liftg loop as standard. As with all dry-disconnect couplgs, the 6 is equally suitable for flexible or loadg arm applications. SAFETY BREAK-AWAY COUPLING Safety Break-away couplgs are used to prevent pull away accidents: the ternal valves will close the flow both les and prevent unwanted release of the media. Mare and offshore applications clude, ship to rig fluid transfer, ship to shore and ship to ship transfer, bunkerg refuelg. Safety Break-away couplgs are available as ANSI/DIN flanges or BSP/ NPT threaded, with sizes from 1 (DN25) to 12 (DN300) and 10/16/25 bar workg pressure Dimensions and data shown may be changed without prior notice

77 Flanged Fittg FIXED FLANGE Serrated shank Flange type Hose shank Flange I17BD61A /2 38 PN 16 PLATED STEEL PLATED STEEL I17BD61A PN 16 PLATED STEEL PLATED STEEL I17BD61A /2 63 PN 16 PLATED STEEL PLATED STEEL I17BD61A PN 16 PLATED STEEL PLATED STEEL I17BD61A PN 16 PLATED STEEL PLATED STEEL I17BD61A PN 16 PLATED STEEL PLATED STEEL I17BD61A PN 16 PLATED STEEL PLATED STEEL I17BD61A PN 16 PLATED STEEL PLATED STEEL Staless Steel version available on request TO ASSEMBLE THE INSERT, USE AG INDUSTRIAL SERRATED FERRULE (PLATED STEEL AND STAINLESS STEEL) Flange type Hose shank Flange I17BE67B /2 38 ASA 150 PLATED STEEL PLATED STEEL I17BE67B ASA 150 PLATED STEEL PLATED STEEL I17BE67B /2 63 ASA 150 PLATED STEEL PLATED STEEL I17BE67B ASA 150 PLATED STEEL PLATED STEEL I17BE67B ASA 150 PLATED STEEL PLATED STEEL I17BE67B ASA 150 PLATED STEEL PLATED STEEL I17BE67B ASA 150 PLATED STEEL PLATED STEEL I17BE67B ASA 150 PLATED STEEL PLATED STEEL Staless Steel version available on request TO ASSEMBLE THE INSERT, USE AG INDUSTRIAL SERRATED FERRULE (PLATED STEEL AND STAINLESS STEEL) fittgs 75 Dimensions and data shown may be changed without notice

78 Flanged Fittg SWIVEL FLANGE Serrated shank Flange type Hose shank Flange I17BD72A /2 38 PN 16 PLATED STEEL PLATED STEEL I17BD72A PN 16 PLATED STEEL PLATED STEEL I17BD72A /2 63 PN 16 PLATED STEEL PLATED STEEL I17BD72A PN 16 PLATED STEEL PLATED STEEL I17BD72A PN 16 PLATED STEEL PLATED STEEL I17BD72A PN 16 PLATED STEEL PLATED STEEL I17BD72A PN 16 PLATED STEEL PLATED STEEL I17BD72A PN 16 PLATED STEEL PLATED STEEL TO ASSEMBLE THE INSERT, USE AG INDUSTRIAL SERRATED FERRULE (PLATED STEEL AND STAINLESS STEEL) Flange type Hose shank Flange I37BD72A /4 32 PN 16 S/S 316 S/S I37BD72A /2 38 PN 16 S/S 316 S/S I37BD72A PN 16 S/S 316 S/S I37BD72A /2 63 PN 16 S/S 316 S/S I37BD72A PN 16 S/S 316 S/S I37BD72A PN 16 S/S 316 S/S I37BD72A PN 16 S/S 316 S/S 316 TO ASSEMBLE THE INSERT, USE AG INDUSTRIAL SERRATED FERRULE (PLATED STEEL AND STAINLESS STEEL) fittgs Flange type Hose shank Flange I17BE79A /2 38 ASA 150 PLATED STEEL PLATED STEEL I17BE79A ASA 150 PLATED STEEL PLATED STEEL I17BE79A /2 63 ASA 150 PLATED STEEL PLATED STEEL I17BE79A ASA 150 PLATED STEEL PLATED STEEL I17BE79A ASA 150 PLATED STEEL PLATED STEEL I17BE79A ASA 150 PLATED STEEL PLATED STEEL I17BE79A ASA 150 PLATED STEEL PLATED STEEL I17BE79A ASA 150 PLATED STEEL PLATED STEEL TO ASSEMBLE THE INSERT, USE AG INDUSTRIAL SERRATED FERRULE (PLATED STEEL AND STAINLESS STEEL) Flange type Hose shank Flange I37BE79A ASA 150 S/S 316 S/S I37BE79A /2 63 ASA 150 S/S 316 S/S I37BE79A ASA 150 S/S 316 S/S I37BE79A ASA 150 S/S 316 S/S I37BE79A ASA 150 S/S 316 S/S 316 TO ASSEMBLE THE INSERT, USE AG INDUSTRIAL SERRATED FERRULE (PLATED STEEL AND STAINLESS STEEL) 76 Dimensions and data shown may be changed without prior notice

79 Built- Fittg BUILT-IN FITTING These metal fittgs are built to the ends durg manufacturg and form an tegral part of the whole assembly. They are chemically bonded to the and mechanically secured to the reforcement plies and to the embedded steel helix, where present. Flange material: Hot deep zc plated carbon steel AVAILABLE ON REQUEST: Raised Face (RF) or Flat Face (FF) flange Flange complete with non sparkg brass rg Built- fittgs with UNI PN 10/16 flange Staless steel AISI 316 Built- fittgs Fittgs accordg to OCIMF FIXED FLANGE - WELDING NECK RAISED FACE ASME B 16.5 ASA 150 Flange Built- fittg Item Code Fittgs Hose ID Flange DN O t FIXED FLANGE - SLIP-ON RAISED FACE ASME B 16.5 ASA 150 Flange Built- fittg R I1VBE66B ,6 23,8 157,2 134,9 114,3 102,4 76,2 190,5 8 19, I1VBE66B ,4 25,4 215,9 192,1 168,4 154,2 88,9 241,3 8 22, I1VBE66B ,9 28,6 269,8 246,1 219,1 202,7 101,6 298,4 8 22, I1VBE66B ,4 30,2 323,8 304,8 273,0 254,5 101,6 361, , I1VBE66B ,6 31,7 381,0 365,1 323,8 304,8 114,3 431, ,4 X A Flange B Y W Hole n L fittgs Fittgs Flange Flange DN O t R X B Y W Hole n L I1VBE67B ,6 23,8 157,2 134,9 116,1 33,3 190,5 8 19,0 I1VBE67B ,4 25,4 215,9 192,1 170,7 39,7 241,3 8 22,2 I1VBE67B ,9 28,6 269,8 246,1 221,5 44,4 298,4 8 22,2 I1VBE67B ,4 30,2 323,8 304,8 276,3 49,2 361, ,4 I1VBE67B ,6 31,7 381,0 365,1 327,1 55,6 431, ,4 SWIVEL FLANGE - LAP JOINT ASME B 16.5 ASA 150 Flange Built- fittg Fittgs Flange Flange DN O t X B Y r W Hole n L I1VBE79A ,6 23,8 134,9 116,8 33,3 11,1 190,5 8 19, I1VBE79A ,4 25,4 192,1 171,4 39,7 12,7 241,3 8 22, I1VBE79A ,9 28,6 246,1 222,2 44,4 12,7 298,4 8 22, I1VBE79A ,4 30,2 304,8 277,4 49,2 12,7 361, , I1VBE79A ,6 31,7 365,1 328,2 55,6 12,7 431, , Dimensions and data shown may be changed without notice

80 Composite Hose Fittg COMBINATION NIPPLE Male BSPP - Helical shank for composite type I BSPP ALUMINIUM I /2 BSPP ALUMINIUM I BSPP ALUMINIUM I /2 BSPP ALUMINIUM I BSPP ALUMINIUM I BSPP ALUMINIUM type I BSPP PLATED STEEL I BSPP PLATED STEEL type I BSPP S/S I /4 BSPP S/S I /2 BSPP S/S I BSPP S/S I /2 BSPP S/S I BSPP S/S I BSPP S/S 316 I BSPP S/S 316 I BSPP S/S 316 fittgs type I BSPP BRONZE I /4 BSPP BRONZE I /2 BSPP BRONZE I BSPP BRONZE I /2 BSPP BRONZE I BSPP BRONZE I BSPP BRONZE type IP /2 BSPP PP IP BSPP PP IP /2 BSPP PP IP BSPP PP IP BSPP PP COMBINATION NIPPLE Male NPT - Helical shank for composite type I NPT PLATED STEEL I NPT PLATED STEEL I NPT PLATED STEEL type I NPT S/S 316 I NPT S/S I NPT S/S Dimensions and data shown may be changed without prior notice

81 Composite Hose Fittg FIXED FLANGE Helical shank for composite Flange type Hose Shank flange I12BD66B /2 40 PN 10/16 PLATED STEEL PLATED STEEL I12BD66B PN 10/16 PLATED STEEL PLATED STEEL I12BD66B PN 10/16 PLATED STEEL PLATED STEEL I12BD66B PN 10/16 PLATED STEEL PLATED STEEL I12BD66B PN 10/16 PLATED STEEL PLATED STEEL I12BD66B PN 10/16 PLATED STEEL PLATED STEEL I12BD66B PN 10/16 PLATED STEEL PLATED STEEL I32BD66B /2 40 PN 10/16 S/S 316 S/S 316 I32BD66B PN 10/16 S/S 316 S/S 316 I32BD66B PN 10/16 S/S 316 S/S I32BD66B PN 10/16 S/S 316 S/S 316 I32BD66B PN 10/16 S/S 316 S/S 316 I32BD66B PN 10/16 S/S 316 S/S 316 I32BD66B PN 10/16 S/S 316 S/S 316 Flange type Hose Shank flange I12BE66B /2 40 ASA 150 PLATED STEEL PLATED STEEL I12BE66B ASA 150 PLATED STEEL PLATED STEEL I12BE66B ASA 150 PLATED STEEL PLATED STEEL I12BE66B ASA 150 PLATED STEEL PLATED STEEL I12BE66B ASA 150 PLATED STEEL PLATED STEEL I12BE66B ASA 150 PLATED STEEL PLATED STEEL I12BE66B ASA 150 PLATED STEEL PLATED STEEL I32BE66B /2 40 ASA 150 S/S 316 S/S 316 I32BE66B ASA 150 S/S 316 S/S 316 I32BE66B ASA 150 S/S 316 S/S I32BE66B ASA 150 S/S 316 S/S 316 I32BE66B ASA 150 S/S 316 S/S 316 I32BE66B ASA 150 S/S 316 S/S 316 I32BE66B ASA 150 S/S 316 S/S 316 fittgs 79 Dimensions and data shown may be changed without notice

82 Composite Hose Fittg SWIVEL FLANGE Helical shank for composite Flange type Hose Shank flange I12BD72A /2 40 PN 10/16 PLATED STEEL PLATED STEEL I12BD72A PN 10/16 PLATED STEEL PLATED STEEL I12BD72A /2 65 PN 10/16 PLATED STEEL PLATED STEEL I12BD72A PN 10/16 PLATED STEEL PLATED STEEL I12BD72A PN 10/16 PLATED STEEL PLATED STEEL I12BD72A PN 10/16 PLATED STEEL PLATED STEEL I12BD72A PN 10/16 PLATED STEEL PLATED STEEL I12BD72A PN 10/16 PLATED STEEL PLATED STEEL IA2BD72A /2 40 PN 10/16 S/S 316 PLATED STEEL IA2BD72A PN 10/16 S/S 316 PLATED STEEL IA2BD72A PN 10/16 S/S 316 PLATED STEEL IA2BD72A PN 10/16 S/S 316 PLATED STEEL IA2BD72A PN 10/16 S/S 316 PLATED STEEL IA2BD72A PN 10/16 S/S 316 PLATED STEEL IA2BD72A PN 10/16 S/S 316 PLATED STEEL fittgs I32BD72A /2 40 PN 10/16 S/S 316 S/S 316 I32BD72A PN 10/16 S/S 316 S/S 316 I32BD72A PN 10/16 S/S 316 S/S 316 I32BD72A PN 10/16 S/S 316 S/S 316 I32BD72A PN 10/16 S/S 316 S/S 316 I32BD72A PN 10/16 S/S 316 S/S 316 I32BD72A PN 10/16 S/S 316 S/S 316 Flange type Hose Shank flange IP2BC72A PN 10 PP PP IP2BC72A PN 10 PP PP IP2BC72A PN 10 PP PP Flange type Hose Shank flange I12BE77A /2 40 ASA 150 PLATED STEEL PLATED STEEL I12BE77A ASA 150 PLATED STEEL PLATED STEEL I12BE77A ASA 150 PLATED STEEL PLATED STEEL I12BE77A ASA 150 PLATED STEEL PLATED STEEL I12BE77A ASA 150 PLATED STEEL PLATED STEEL I12BE77A ASA 150 PLATED STEEL PLATED STEEL I12BE77A ASA 150 PLATED STEEL PLATED STEEL IA2BE77A /2 40 ASA 150 S/S 316 PLATED STEEL IA2BE77A ASA 150 S/S 316 PLATED STEEL IA2BE77A ASA 150 S/S 316 PLATED STEEL IA2BE77A ASA 150 S/S 316 PLATED STEEL IA2BE77A ASA 150 S/S 316 PLATED STEEL IA2BE77A ASA 150 S/S 316 PLATED STEEL IA2BE77A ASA 150 S/S 316 PLATED STEEL I32BE77A /2 40 ASA 150 S/S 316 S/S 316 I32BE77A ASA 150 S/S 316 S/S 316 I32BE77A ASA 150 S/S 316 S/S 316 I32BE77A ASA 150 S/S 316 S/S 316 I32BE77A ASA 150 S/S 316 S/S 316 I32BE77A ASA 150 S/S 316 S/S 316 I32BE77A ASA 150 S/S 316 S/S Dimensions and data shown may be changed without prior notice

83 Composite Hose Fittg SMOOTH FERRULE FOR COMPOSITE HOSE I105C PLATED STEEL I105C PLATED STEEL I105C PLATED STEEL I105C PLATED STEEL I105C PLATED STEEL I105C PLATED STEEL I105C PLATED STEEL I205C S/S I205C S/S I205C S/S I205C S/S I205C S/S I205C S/S I205C S/S 304 I205C S/S 304 I205C S/S I505C ALUMINIUM I505C ALUMINIUM I505C ALUMINIUM I505C ALUMINIUM I505C ALUMINIUM fittgs CRIMPING GASKET FOR COMPOSITE HOSE INJS NBR INJS NBR INJS NBR INJS NBR INJS NBR INJS NBR INJS NBR INJS NBR INJS NBR GASKETS IN VITON ARE AVAILABLE ON REQUEST 81 Dimensions and data shown may be changed without notice

84

85 FITTINGS HYDRAULIC FITTINGS WATERBLAST INSERT & FERRULE HYDRAULIC FITTING-HAMMER LUG UNION HYDRAULIC FITTING-API THREAD HYDRAULIC FITTING AND ADAPTOR: REFER TO HYDRAULIC CATALOGUE

86 Waterblast Insert & Ferrule H Ferrule for Interlock Fittgs Alfabiotech series Waterblast WB10 4 spiral Hose ID Hose ID Dash B L H /8 9, H /2 12, , H /8 15, , H / , H , , H /4 31, , H /2 38, , H , ,1 D Ferrule for Waterblast WB 15 Hose ID Hose ID Dash B L D /8 10, ,0 47, D99000N-08 1/2 13, ,0 50, D /4 19, ,0 63, D , ,0 75,0 STAINLESS STEEL VERSION AVAILABLE ON REQUEST D Ferrule for Waterblast WB 20 Hose ID Hose ID Dash B L D /2 13, ,0 A99179 Metric Female 24 cone with O-Rg - Heavy - DIN 3865 DKOS Slip on nut with relief bore fittgs Dash C Cut-off /8 9, x1,5 42, /8 9, x1,5 42, /2 12, x1,5 47, /4 19, x2 64, , x2 73,4 50 CH NPTF Male 60 Dash -TPI Dash C Cut-off /8 9,5 06 3/ , /2 12,7 08 1/ , /4 19,0 12 3/ , , ,5 36 CH1 A99001 BSP Female 60 A99061 Type M Swivel Dash -TPI Dash C Cut-off /8 9,5 06 3/ , /2 12,7 08 1/ , /4 19,0 12 3/ ,5 36 CH2 Dash -TPI Dash C Cut-off A /2 12, ,0 30 CH Dimensions and data shown may be changed without prior notice

87 Haer Lug Union two-piece Interlock FOR FLEXOR R13, FLEXOR 4SH, ALFATECH 5000, ALFABIOTECH 5000 AND FLEXOR RIG MINETUFF AND SUPERTUFF COVERS Male Haer Union Fig tegral fittg with Lug Nut DASH C CUT-OFF L Overal Length H1413F , ,40 Weight kg L C Female Haer Union Fig tegral fittg with Rubber Rg DASH C CUT-OFF L Overal Length H1423F ,5 148,5 2,30 Weight kg C L Interlock ferrule H Flexor R13, Alfatech 5000, Alfabiotech 5000 and Flexor Rig Hose ID Hose ID DASH H ,50 B L Weight kg Interlock ferrule H Flexor 4SH Hose ID Hose ID DASH H ,1 0,95 B L Weight kg fittgs FOR ALFATECH 6000, FLEXOR R13 AND FLEXOR RIG MINETUFF AND SUPERTUFF COVERS Male Haer Union Fig tegral fittg with Lug Nut DASH C CUT-OFF L Overal Length H1T13F ,9 162,2 6,60 Weight kg L C Female Haer Union Fig tegral fittg with Rubber Rg DASH C CUT-OFF L Overal Length H1T23F ,4 158,7 2,60 Interlock ferrule H1T00600 Weight kg C L Hose ID Hose ID DASH H1T ,1 108,2 1,50 B L Weight kg 85 Dimensions and data shown may be changed without notice

88 Haer Lug Union one-piece no-skive FOR FLEXOR R13, ALFATECH 5000, ALFABIOTECH 5000 AND FLEXOR RIG MINETUFF AND SUPERTUFF COVERS Male Haer Union Fig tegral fittg with Lug Nut DASH C CUT-OFF L Overal Length C12R13F ,5 6,60 Weight kg L C Female Haer Union Fig tegral fittg with Rubber Rg DASH C CUT-OFF L Overal Length C12R23F , ,50 FOR FLEXOR 4SH MINETUFF AND SUPERTUFF COVERS Weight kg C L Male Haer Union Fig tegral fittg with Lug Nut DASH C CUT-OFF L Overal Length Weight kg fittgs C12H13F ,5 6,60 L C Female Haer Union Fig tegral fittg with Rubber Rg DASH C CUT-OFF L Overal Length C12H23F , ,50 Weight kg C L 86 Dimensions and data shown may be changed without prior notice

89 Hydraulic Fittg-API H141281Z Firesafe pc. male API terlock extra long hexagon DASH F -TPI F DASH C CUT-OFF Factor H141281Z , ,0 36 H141281Z /4 31, / ,8 46 H141281Z /2 38, / ,5 50 H141281Z , ,5 65 CH1 STAINLESS STEEL VERSION AVAILABLE ON REQUEST C Z Flexor Rig 1 pc. male API extra long hexagon DASH F -TPI F DASH C CUT-OFF Factor C Z / / ,5 36 C Z , ,6 46 C Z /4 31, / ,0 50 C Z /2 38, / ,5 65 C Z , STAINLESS STEEL VERSION AVAILABLE ON REQUEST CH1 fittgs 87 Dimensions and data shown may be changed without notice

90

91 FITTINGS QUICK RELEASE COUPLING STANDARD ISO 7241 A - Poppet SVK-ISO-A STANDARD ISO Poppet SVK-1H push-pull STANDARD ISO Poppet SPK-1H male connectable under pressure STANDARD ISO Flat Face FPK STANDARD ISO Flat Face FPP connectable under pressure SCREW COUPLING - Poppet HDK QUICK CONNECT ADAPTER... 99

92 Quick Release Couplg Ø A Ø D d 3 Ø A SW B B SW L STANDARD ISO 7241 A - Poppet SVK-ISO-A Female couplg - female thread fittgs WP Conn./ disconn. M BP Conn./ disconn. ø A B ø D L SW DASH DN ch MPa MPa R1QEPAF06F / BSPP 1/ , R1QEPAF06F /8 31,5 126 BSPP 3/8 57,1 31,5 78, R1QEPAF06F / BSPP 1/ ,5 88, R1QEPAF06F / BSPP 3/4 82, , R1QEPAF06F BSPP , R1QEPAF06F / BSPP 1 1/ R1QEPAF06F / BSPP 1 1/ , R1QEPAF28F / NPTF 1/ , R1QEPAF28F / NPTF 3/8 57,1 31,5 78, R1QEPAF28F / NPTF 1/ ,5 88, R1QEPAF28F / NPTF 3/4 82, , R1QEPAF28F NPTF , R1QEPAF28F / NPTF 1 1/ , R1QEPAF52F / MET M22x1, ,5 88,2 27 BSPP connection accordg to DIN X, NPTF connection accordg to ANSI B1-20.3, metric connection accordg to ISO STANDARD ISO 7241 A - Poppet SVK-ISO-A Male couplg - female thread WP Conn./ disconn. M BP Conn./ disconn. ø A B d 3 L SW DASH DN ch MPa MPa R1QEPAM06F / BSPP 1/4 38,5 11,8 74, R1QEPAM06F /8 31,5 126 BSPP 3/ ,3 78, R1QEPAM06F / BSPP 1/ ,5 88, R1QEPAM06F / BSPP 3/ , R1QEPAM06F BSPP ,3 132, R1QEPAM06F / BSPP 1 1/ R1QEPAM06F / BSPP 1 1/2 83, R1QEPAM28F / NPTF 1/4 38,5 11,8 74, R1QEPAM28F / NPTF 3/ ,3 78, R1QEPAM28F / NPTF 1/ ,5 88, R1QEPAM28F / NPTF 3/ , R1QEPAM28F NPTF ,3 132, R1QEPAM28F / NPTF 1 1/2 83, R1QEPAM52F / MET M22x1, ,5 88,2 27 BSPP connection accordg to DIN X, NPTF connection accordg to ANSI B1-20.3, metric connection accordg to ISO Dimensions and data shown may be changed without prior notice

93 Quick Release Couplg STANDARD ISO Poppet SVK-1H push-pull Female couplg - female thread WP Conn./ d 3 d 7 d 9 l 2 l 3 l 5 t 1 SW 3 disconn. DASH DN ch MPa R1Q /8 40 BSPP 3/ R1Q /2 25 BSPP 1/ R1Q /4 25 BSPP , R1Q /8 40 NPTF 3/ R1Q /2 25 NPTF 1/ R1Q /4 25 NPTF , R1Q /8 40 SAE/UNF 9/16" R1Q /2 25 SAE/UNF 3/ R1Q /4 25 SAE/UN 1"5/ , R1Q /8 40 MET M16x1, R1Q /2 25 MET M22x1, R1Q /4 25 MET M30x1, , BSPP connection accordg to DIN X, NPTF connection accordg to ANSI B1-20.3, metric connection accordg to DIN 3852, SAE UNF/UN connection accordg to SAE J fittgs STANDARD ISO Poppet SVK-1H Male couplg - female thread WP Conn./ d 3 d 8 l 3 l 13 t 1 SW 2 disconn. DASH DN ch MPa R1Q /8 40 BSPP 3/ R1Q /2 25 BSPP 1/ R1Q /4 25 BSPP R1Q /8 40 NPTF 3/ R1Q /2 25 NPTF 1/ R1Q /4 25 NPTF R1Q /8 40 SAE/UNF 9/16" R1Q /2 25 SAE/UNF 3/ R1Q /4 25 SAE/UN 1"5/ R1Q /8 40 MET M16x1, R1Q /2 25 MET M22x1, R1Q /4 25 MET M30x1, BSPP connection accordg to DIN X, NPTF connection accordg to ANSI B1-20.3, metric connection accordg to DIN 3852, SAE UNF/UN connection accordg to SAE J Dimensions and data shown may be changed without notice

94 fittgs Quick Release Couplg STANDARD ISO Poppet SVK-1H push-pull Female couplg - male thread WP Conn./ Fittg d 1 l 8 l 10 disconn. DASH DN ch MPa R1Q /8 40 AGF 1/ R1Q /8 40 AGF 3/ R1Q /2 25 AGF 1/ R1Q /4 25 AGF 3/ R1Q /4 25 AGF AGF connection accordg to DIN 3901 heavy duty range with pipe thread G (BSPP), type A to DIN STANDARD ISO Poppet SVK-1H Male couplg - male thread WP Conn./ Fittg d 1 l 8 l 10 disconn. DASH DN ch MPa R1Q /8 40 AGF 1/ R1Q /8 40 AGF 3/ R1Q /2 25 AGF 1/ R1Q /4 25 AGF 3/ R1Q /4 25 AGF AGF connection accordg to DIN 3901 heavy duty range with pipe thread G (BSPP), type A to DIN Dimensions and data shown may be changed without prior notice

95 Quick Release Couplg fittgs STANDARD ISO Poppet SPK-1H male connectable under pressure Female couplg - female thread WP Conn./ d 1 l 2 disconn. DASH DN ch MPa R1Q /2 25 BSPP 1/ R1Q /2 25 NPTF 1/ R1Q /2 25 SAE/UNF 3/ R1Q /2 25 MET M22x1,5 80 BSPP connection accordg to DIN X, NPTF connection accordg to ANSI B1-20.3, metric connection accordg to DIN 3852, SAE UNF/UN connection accordg to SAE J Dimensions and data shown may be changed without notice

96 Quick Release Couplg d 1 Ø D SW B L (connected) STANDARD ISO Flat Face FPK Female couplg - female thread fittgs WP Conn./ disconn. M BP Conn./ disconn. d 1 B Ø D L SW DASH DN ch MPa MPa R1Q / BSPP 1/4 57, R1Q / BSPP 3/8 69, R1Q / BSPP 1/2 69, R1Q / BSPP 1/2 74, R1Q / BSPP 3/4 74, R1Q / BSPP 3/4 81, R1Q / BSPP 3/ R1Q / BSPP R1Q BSPP R1Q BSPP 1 1/ R1Q / NPTF 1/4 49, , R1Q / NPTF 3/ R1Q / NPTF 1/ R1Q / NPTF 1/2 74, , R1Q / NPTF 3/4 74, , R1Q / NPTF 3/4 81, , R1Q / NPTF 3/4 92, , R1Q / NPTF 1 92, , R1Q NPTF 1 100, , R1Q / SAE/UNF 9/16" R1Q / SAE/UNF 3/ , , R1Q / SAE/UN 1"1/ , , R1Q / SAE/UN 1"1/ , , R1Q SAE/UN 1"5/ , , R1Q / MET M22x1, BSPP connection accordg to DIN X, NPTF connection accordg to ANSI B1-20.3, metric connection accordg to ISO , SAE UNF/UN connection accordg to SAE J Dimensions and data shown may be changed without prior notice

97 Quick Release Couplg SW B STANDARD ISO Flat Face FPK Male couplg - female thread WP Conn./ disconn. M BP Conn./ disconn. d 1 B d 3 L SW DASH DN ch MPa MPa R1Q / BSPP 1/2 50,5 16, R1Q / BSPP 3/ , R1Q / BSPP 1/ , R1Q / BSPP 1/ , R1Q / BSPP 3/ , R1Q / BSPP 3/ R1Q / BSPP 3/ , R1Q / BSPP , R1Q BSPP R1Q BSPP 1 1/ R1Q / NPTF 1/2 49, , R1Q / NPTF 3/ , R1Q / NPTF 1/ , R1Q / NPTF 1/ ,6 142, R1Q / NPTF 3/ ,6 142, R1Q / NPTF 3/ , R1Q / NPTF 3/ ,9 177, R1Q / NPTF ,9 177, R1Q NPTF , R1Q / SAE/UNF 9/16" , R1Q / SAE/UNF 3/ ,6 142, R1Q / SAE/UN 1"1/ , R1Q / SAE/UN 1"1/ ,9 177, R1Q SAE/UN 1"5/ , R1Q / MET M22x1, , BSPP connection accordg to DIN X, NPTF connection accordg to ANSI B1-20.3, metric connection accordg to ISO , SAE UNF/UN connection accordg to SAE J d 3 fittgs d 1 L (connected) 95 Dimensions and data shown may be changed without notice

98 fittgs Quick Release Couplg d 3 d 1 SW B L (connected) STANDARD ISO Flat Face FPP connectable under pressure Male couplg - female thread WP Conn./ disconn. M BP Conn./ disconn. d 1 SW B d 3 L DASH DN ch MPa MPa ON REQUEST / BSPP 3/ ,5 19, R1Q / BSPP 1/ ,5 24, ON REQUEST / BSPP 3/ ,5 29,9 189,5 BSPP connection accordg to DIN X 96 Dimensions and data shown may be changed without prior notice

99 Quick Release Couplg fittgs SCREW COUPLING - Poppet HDK Female couplg (fixed part) - male thread WP Conn./ disconn. Fittg DN Fittg d 1 d 6 l 2 l 6 l 8 l 19 SW 1 DASH DN ch MPa R1Q /16 45 AGF 8 3/8 Rd 28x , R1Q /2 40 AGF 12 1/2 Rd 36x2 61,5 3, R1Q /4 31,5 AGF 16 3/4 Rd 48x3 87,5 7, R1Q /4 31,5 AGF 20 1 Rd 48x3 90 7, AGF connection accordg to DIN 3901 heavy duty range with pipe thread G (BSPP), type A to DIN SCREW COUPLING - Poppet HDK Male couplg (loose part) - male thread WP Conn./ disconn. Fittg DN Fittg d 1 d 7 l 2 l 6 l 8 l 19 SW 1 DASH DN ch MPa R1Q /16 45 AGF 8 3/ , R1Q /2 40 AGF 12 1/ , , R1Q /4 31,5 AGF 16 3/ R1Q /4 31,5 AGF AGF connection accordg to DIN 3901 heavy duty range with pipe thread G (BSPP), type A to DIN Dimensions and data shown may be changed without notice

100 fittgs Quick Release Couplg SCREW COUPLING - Poppet HDK Female couplg (fixed part) - female thread WP Conn./ disconn. DN Fittg d 1 d 6 l 2 l 6 l 19 t 1 /t 2 SW 1 DASH DN ch MPa R1Q /16 45 BSPP 3/8 Rd 28x , R1Q /2 40 BSPP 1/2 Rd 36x2 60, R1Q ,5 BSPP 3/4 Rd 48x3 89, R1Q ,5 BSPP 1 Rd 48x3 92, R1Q /4 31,5 BSPP 1 1/4 Rd 70x R1Q /2 4 NPTF 1/2-14 Rd 36x2 61, , R1Q ,15 NPTF 3/4-14 Rd 48x3 84, R1Q ,15 NPTF 1-11,5 Rd 48x3 88, , R1Q /4 31,5 NPTF 1 1/4 Rd 70x R1Q ,5 SAE UN 1 1/16-12 Rd 48x3 89, BSPP connection accordg to DIN X, NPTF connection accordg to ANSI B1-20.3, metric connection accordg to DIN 3852, SAE UNF/UN connection accordg to SAE J SCREW COUPLING - Poppet HDK Female couplg (loose part) - female thread WP Conn./ disconn. DN Fittg d 1 d 7 l 2 l 6 l 19 t 1 SW 1 DASH DN ch MPa R1Q /16 45 BSPP 3/ , R1Q /2 40 BSPP 1/ ,5 4 15, R1Q ,5 BSPP 3/ R1Q ,5 BSPP R1Q /4 31,5 BSPP 1 1/ R1Q /2 40 NPTF 1/ ,5 4 15,5 16, R1Q ,5 NPTF 3/ R1Q ,5 NPTF 1-11, , R1Q /4 31,5 NPTF 1 1/ R1Q ,5 SAE UN 1 1/ BSPP connection accordg to DIN X, NPTF connection accordg to ANSI B1-20.3, metric connection accordg to DIN 3852, SAE UNF/UN connection accordg to SAE J Dimensions and data shown may be changed without prior notice

101 Quick Release Couplg fittgs QUICK CONNECT ADAPTER - Flat Face - ISO A 1/2 Female flat face ISO Male poppet ISO 7241 A WP Connected M BP Connected DASH DN ch MPa MPa R1Q / ,7 32 C Ø D Ø B SW QUICK CONNECT ADAPTER - Flat Face - ISO A 1/2 Male flat face ISO Female poppet ISO 7241 A WP Connected M BP Connected DASH DN ch MPa MPa R1Q / , C Ø D Ø B SW 99 Dimensions and data shown may be changed without notice

102

103 ACCESSORIES ACCESSORIES BALL VALVES RETAINING SYSTEMS HOSE PROTECTION NYLON CHAIN STAINLESS STEEL CHAIN HOSE FLOATS

104 Ball Valve BALL VALVE A complete range to fit low and high pressure les. Shock-resistant, engeered to be used harsh environments, they can have connections to pipes or s, accordg to the specific applications demands. 2-WAY BALL VALVE Series BKH-MKH DIN-ISO 1219 BSP Female (NPTF female also available) ID ID ID dash size THREAD SIZE R1VBKH0006-G /4 4 1/ R1VBKH0010-G /8 6 3/ R1VBKH0013-G /2 8 1/ R1VBKH0020-G /4 12 3/ , R1VBKH0025-G / , R1VBKH0025-G , R1VMKH0032-G / / R1VMKH0040-G / / R1VMKH0050-G STAINLESS STEEL VERSION AVAILABLE ON REQUEST WP Mpa WP psi L C H SW fittgs 3-WAY BALL VALVE Series BK3 DIN 2429 BSP Female (NPTF female also available) ID ID ID dash size THREAD SIZE R1VBK3L006-G /4 4 1/ , R1VBK3L010-G /8 6 3/ , R1VBK3L013-G /2 8 1/ , R1VBK3L020-G /4 12 3/ , R1VBK3L025-G , STAINLESS STEEL VERSION AVAILABLE ON REQUEST WP Mpa WP psi L C H SW Dimensions and data shown may be changed without prior notice

105 Retag System WHIP CHAIN Whip chas are a retag system made of high tensile cables used for restrat of assemblies, should they accidentally separate. Alfagoa can offer a wide range of whip chas for: Hoses attached with port adapters Hoses usg flange-style connections Whip chas are to be used combation with the specific band, dependg on diameter. Item code DESCRIPTION Additional description R1YCCH Retag Sys. band STOPFA R1YCCH Retag Sys. band STOPFA R1YCCH Retag Sys. band STOPFA R1YCCH Retag Sys. band STOPFA R1YCCH Retag Sys. band STOPFA R1YCCH Retag Sys. band STOPFA R1YCCH Retag Sys. band STOPFA R1YCCH Retag Sys. band STOPFA R1YCCH Retag Sys. band STOPFA R1YCCH Retag Sys. band STOPFA R1YCCH Retag Sys. band STOPFA R1YCCH Retag Sys. band STOPFA R1YCCH Retag Sys. band STOPFA R1YCCH Retag Sys. band STOPFA R1YCCH Retag Sys. band STOPFA R1YCCH Retag Sys. band STOPFA R1YCCH Retag Sys. band STOPFA R1YCCH Retag Sys. band STOPFA R1YCCH Retag Sys. band STOPFA R1YCCH Retag Sys. band STOPFA R1YCCH Retag Sys. band STOPFA R1YCCH Retag Sys. band STOPFA R1YCCH Retag Sys. band STOPFA R1YCCH Retag Sys. band STOPFA R1YCCH Retag Sys. band STOPFA R1YCCH Retag Sys. band STOPFA R1YCCH Retag Sys. band STOPFA R1YCCH Retag Sys. band STOPFA R1YCCH Retag Sys. band STOPFA R1YCCH Retag Sys. band STOPFA R1YCCH Retag Sys. band STOPFA R1YCCH Retag Sys. band STOPFA R1YCCH Retag Sys. band STOPFA R1YCCD Retag Sys. DKO ID17 L300 - slg for M16 STOPFUDIN R1YCCD Retag Sys. DKO ID18.5 L300 - slg for M18 STOPFUDIN R1YCCD Retag Sys. DKO ID20.5 L300 - slg for M20 STOPFUDIN R1YCCD Retag Sys. DKO ID22.5 L300 - slg STOPFUDIN R1YCCD Retag Sys. DKO ID24.5 L300 - slg for M24 STOPFUDIN R1YCCD Retag Sys. DKO ID26.5 L300 - slg for M26 STOPFUDIN R1YCCD Retag Sys. DKO ID30.5 L300 - slg for M30 STOPFUDIN R1YCCD Retag Sys. DKO ID34 L450 - slg STOPFUDIN R1YCCD Retag Sys. DKO ID36.5 L450 - slg for M36 STOPFUDIN R1YCCD Retag Sys. DKO ID42.5 L450 - slg for M42 STOPFUDIN R1YCCD Retag Sys. DKO ID45.5 L450 - slg for M45 STOPFUDIN R1YCCD Retag Sys. DKO ID49 L450 - slg STOPFUDIN R1YCCD Retag Sys. DKO ID52.5 L450 - slg for M52 STOPFUDIN R1YCCF Retag Sys. FL. ID08.5 L300 - for flange 3000 & /2" STOPFUSAE R1YCCF Retag Sys. FL. ID10.5 L450 - for flange /4"-1"-1"1/4 & /4" STOPFUSAE R1YCCF Retag Sys. FL. ID12.5 L450 - for flange "1/2-2"-2"1/2 & " STOPFUSAE R1YCCF Retag Sys. FL. ID14.5 L450 - for flange "1/4 STOPFUSAE R1YCCF Retag Sys. FL. ID16.5 L450 - for flange "-3"1/2-4"-5" & "1/2 STOPFUSAE R1YCCF Retag Sys. FL. ID20.5 L450 - for flange " STOPFUSAE R1YCCV Retag Sys. ID13 L450 - slg for generic fittg STOPFUVARIE fittgs Dimensions and data shown may be changed without notice

106 Retag System WHIP SOCK Safety retag sock for various types, with tie-on device for retrofittg existed les without disconnectg fittgs. Type for O/D SHH SHH SHH SHH SHH R13 DN 31, R15 DN 25, SH DN 19 25, SP DN 6, 10 12, 16, SN DN 6, 8, 10, 12 16, 19, SN DN 8, 10, 12, 16 19, T DN 8, 10, 12, 16 19, 25 1SC DN 10, 12, 16 19, 25 2SC DN 8, 10, 12, 16 19, 25 fittgs Dimensions and data shown may be changed without prior notice

107 Hose Protection FIRE PROTECTION SLEEVE Woven meral fibre flame protection sleeve with silicon external coatg. Used to protect s and fittgs from extreme temperatures. To be fixed with clamps or crimped rgs. Temperature: +250 C (482 F) termittent to 1500 C (2732 F) Item code Part. Number d RLYGAS RLYGAS RLYGAS RLYGAS RLYGAS RLYGAS RLYGAS RLYGAS RLYGAS RLYGAS RLYGAS MSHA TEXTILE SLEEVE Polyester sleeve to protect the from abrasion, weatherg and high temperature. MSHA IC-152/18 approval. Temperature: -40 C +150 C (-40 F +300 F) Item code Part. Number RTY0G0A-02000T0 20 0, RTY0G0A-02500T0 25 0, RTY0G0A-03000T0 30 1, RTY0G0A-03500T0 35 1, RTY0G0A-04000T0 40 1, RTY0G0A-04500T0 45 1, RTY0G0A-05000T0 50 1, RTY0G0A-06500T0 65 2, RTY0G0A-07500T0 75 2, RTY0G0A-09000T0 90 3,54 ID ID ch fittgs PLASTIC PROTECTIVE FLAT COIL SLEEVE The plastic coil sleeve is resistant agast air, water, oil, petrol, hydraulic liquids etc. This coil sleeve can also be used for group bundlg of les. Temperature: -20 C to +84 C (-4 F to +180 F) Item code Part. Number ID OD Hose OD range RJS1AG RJS1AG RJS1AG RJS1AG RJS1AG RJS1AG RJS1AG RJS1AG RJS1AG RJS1AG RJS1AG Dimensions and data shown may be changed without notice

108 Nylon Cha HEAVY SERIES Heavy series nylon chas are made strong and resistant to ensure high response to pull and push forces. With their heavy connection pivot p these chas offer high tegrity high performance application. Wide range of cross pieces and nylon separator available. fittgs Cha type Pitch Bendg Radius from to C Internal width from to D Internal height from to A External width from to B External height 306 (SU, B) (SU, B) (SU, B) (SU, B) , (T) H SI/SE/SU=ner/outer/both radius snapfit, B=bars, T= alumum draw plates SLIDING SERIES Slidg series nylon chas are made for long travel distance and high protection due to the travel their guide channel. They have a completely smooth surface, tegrated skids to permit the cha to slide on itself and no wearg thanks to special polymers. Wide range of cross pieces and separators available. Cha type Pitch Bendg Radius from to C Internal width from to D Internal height from to A External width from to B External height 326 (SI/SE, B) (SI/SE, B) (SE, B) , (B, SU, CU) , (MI/ME) , ,5 M , M , H , H SI/SE/SU=ner/outer/both radius snapfit, B=bars, T= alumum draw plates Dimensions and data shown may be changed without prior notice

109 Staless Steel Cha STEEL STANDARD CHAINS Steel chas are born for all applications where the nylon chas are not suitable. Especially for rig, steel cha offers high performance, strength and security. These chas are made of staless steel with a wide range of alumum drilled frames or steel rods with movable separators. fittgs Cha type Pitch Bendg Radius from to C Internal width from to D Internal height from to W External width from to B External height 20XL ternal width XL XL XN XN STEEL CUSTOM CHAINS Cha type Pitch Bendg Radius from to C Internal width from to D Internal height from to W External width from B External height 6350XB ternal width XB ternal width XB ternal width Dimensions and data shown may be changed without notice

110 Hose Float HOSE FLOATS Hose flotation devices are used various fields of mare activities, such as offshore oil and gas dustry and port facilities. : Low density ethylene vyl acetate Feature: High buoyancy and excellent resistance to deformg or breakg Item code Hose DN ID OD A Length B Groove Weight kg RMYGFLK , RMYGFLK , RMYGFLK , ,24 22 Buoyancy kg fittgs Dimensions and data shown may be changed without prior notice

111 Note 109

112 Note 110

113 Note 111

114 Note 112

115 LIMITED WARRANTY (North American Market only) The Products sold or distributed by Seller are warranted to its customers to be free from defects material and workmanship at the time of shipment by us, subject to the followg provisions: all warranty claims shall be made with six (6) months after seller shipped the products. seller s liability and customer s remedy hereunder, under any theory of law or equity, cludg without limitation, for breach of contract, negligence, or otherwise, is limited, at seller s exclusive discretion, solely to 1) the purchase price of any products provg defective; 2) repair of any defective product or part thereof; or 3) replacement of any defective product or part upon its authorized return to seller. This warranty is lieu of and excludes, without limitation and to the fullest extent allowable by law, all other warranties or conditions, expressed, implied, statutory, or otherwise created under applicable law cludg, but not limited to, the warranty of merchantability, the warranty of fitness for a particolar purpose, conditions of satisfactory quality, any obligation or warranty to remote purchasers, and t from a course of dealg or usage of trade. In addition, this warranty shall not apply to any products or portions there of that have been subjected to abuse, misuse, improper stallation, matenance, or operation, electrical failure or abnormal conditions, and to products that have been tampered with, altered, modified, repaired, reworked by anyone not approved by seller, or used any manner consistent with any structions or specifications provided with or for the product. In no event shall seller or the manufacturer of the product have any liability whatsoever to any person, cludg without limitation, any iediate buyer, remote purchaser, or other third party, for any special, punitive, cidental, or consequential damages, cludg without limitation, loss of profits of customer or any other person, loss or damage to physical property of customer or any other person, and loss of anticipated revenue, profits, goodwill, savgs, or other economic loss of customer or any other person, even if advised of the possibilità thereof advance, whether or not arisg, caused by, or resultg from, beach of contract, the negligence of seller and/or the manufacturer of the product, or otherwise, unless specifically provided here and except any liability that cannot be excluded or limited by applicable law. There are no warranties that extend beyond the description on the face hereof.

116