Ammeraal Beltech Modular
|
|
- Pauline Armstrong
- 7 years ago
- Views:
Transcription
1 mmeraal eltech Modular Innovative belt and chain solutions for every industry & application
2 Content uni SN M2 20% page 3-6 uni SN M2 34% page 7-10 uni SN M2 Rib 34% page uni SN M2 50% page 15-18
3 Datasheet: uni SN M2 20% EN Plastic Modular elt Series uni SN M2 20% elt material & color POM-D PP PP W PE N PE Pin material & color PP PP W PE N Non standard material and color: See uni Material and Color Overview. lternative pin and lock materials: Lockpin: PT LG P6.6 D N PP W PE N elt width Permissible tensile force (elt/pin material) P elt weight (elt/pin material) L T P (Nominal) POM-D/P6.6 PP/P6.6 PE/P6.6 POM-D/P6.6 PP/P6.6 PE/P6.6 mm in N lbf N lbf N lbf kg/m lb/ft kg/m lb/ft kg/m lb/ft Straight running belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Flat Surface opening: 20% ackflex radius: 30.0 mm (1.20 in) Pin diameter: 5 mm (0.20 in) mm in mm in L T *Min. No. drive sprocket per shaft Number of wear strips (Min. No.) **Carry (pcs) **Return (pcs) PITCH 25.4 MM/1.00 IN STRIGHT RUNNING STNDRD dditional standard belt widths are available in steps of 76.1 mm (3.00 in). dditional non-standard belt widths are available in steps of 12.7 mm (0.50 in) dditional standard belt widths are available in steps of 76.1 mm (3.00 in). dditional non-standard belt widths are available in steps of 12.7 mm (0.50 in) General belt tolerance is +0/-0.4% at 23 C/73 F and 50% RH. For exact belt width contact Customer Service. Non standard belt width on request. *Max. Load per Drive Sprocket. elt material: POM-D 1400 N (315 lbf), PP 1100 N (247 lbf), PE 1100 N (247 lbf). **Max. Spacing between wear strips, Carry: 152 mm (6 in.) ; Return: 304 mm (12 in). = Single Link 3
4 Datasheet: uni SN M2 20% ccessories Rubber Top K600 C K750 elt material & color Rubber material & color C Link Width mm in mm in mm in size mm in M2 20% Flat K PP 03 K K PP W 03 N K ccessories Flight H Front side: Flat ack side: Non Stick M2 20% Flat/Non Stick ccessories Tab / Single Link Only Flight Material & color PP-I W PE N Flights on 25.4 mm (1 in) are cut down from 50.8 mm (2 in). H Width Link size mm in mm in K Z V M2 20% ottom Guide Tab Material & color POM-D PP V Z Width Link size mm in mm in mm in mm in mm in K Non Standard material and color: See uni Material and Color Overview. 4
5 Datasheet: uni SN M2 20% ccessories Rollers NON STNDRD C D E Drawing will be updated Roller material & color C D E mm in mm in mm in mm in mm in Plastic POM-D W Non Standard material and color: See uni Material and Color Overview. ccessories mflight H 1 H H 2 Material & color H H 1 H 2 mm in mm in mm in Push PE W Other Non Standard option: See uni mflight Overview. W (elt width) mm in C min min C PI max W W PI PI min Increment: 12.7 mm (0.50 in). 5
6 Datasheet: uni SN M2 20% Sprocket No. of teeth Pilot ore in mm ore size Overall diameter Pitchdiameter Hubdiameter -dimension -dimension mm in mm in mm in mm in mm in Single row/two way Double row/two way Molded P6 LG Machined P6 N Z10 x x x Z12 x x x Z18 x x x Z18 x x x Z19 x x x Z19 x x x Z20 x x x Z20 x x x Molded sprocket Molded sprocket Non standard material and color: See uni Material and Color Overview. Other sprocket sizes are available upon request. Two-part sprocket are available upon request. Round bores are always delivered with keyway. Other bore sizes are available upon request. uni Retainer Rings: See uni Retainer Ring data sheet. Width of tooth = 6.0 mm (0.24 in) Width of sprocket = 25.0 mm (0.98 in) Max load per sprocket shown does not take bore size into account. Please also ensure that sufficient size shaft is chosen for corresponding load. For correct sprocket position: See uni ssembly Instructions for uni SN. For more detailed sprocket information, contact Customer Service. uni SN M2 20%/ Conveyor elts Seamless elts Modular elts Timing elts Expert advice, quality solutions and local service for all your belting needs This information is subject to alteration due to continuous development. mmeraal eltech will not be held liable for the incorrect use of the above stated information. This information replaces previous information. ll activities performed and services rendered by mmeraal eltech are subject to general terms and conditions of sale and delivery, as applied by its operating companies. Transmission elts Fabrication & service mmeraal eltech Modular /S Hjulmagervej 21 DK-7100 Vejle T F admin@unichains.com 6
7 Datasheet: uni SN M2 34% EN Plastic Modular elt Series uni SN M2 34% Photo will be updated elt width elt material & color POM-D PP PP G PP W PE N PE Pin material & color PP PP W PE N Non standard material and color: See uni Material and Color Overview. Permissible tensile force (elt/pin material) P elt weight (elt/pin material) POM-D/PP PP/PP PE/PE POM-D/PP PP/PP PE/PE mm in N lbf N lbf N lbf kg/m lb/ft kg/m lb/ft kg/m lb/ft L T P (Nominal) lternative pin and lock materials: Pin: PP W PE W P6.6 PT LG SS304 Lockpin: PT LG P6.6 Endlock: PP G W Straight running belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Flat Surface opening: 34% ackflex radius: 30.0 mm (1.20 in) Pin diameter: 5 mm (0.20 in) *P (Nominal) mm in mm in L T D N PP W PE N *Min. No. drive sprocket per shaft Number of wear strips (Min. No.) **Carry (pcs) **Return (pcs) PITCH 25.4 MM/1.00 IN STRIGHT STNDRD RUNNING STNDRD dditional standard belt widths are available in steps of 76.1 mm (3.00 in). dditional non-standard belt widths are available in steps of 12.7 mm (0.50 in) dditional standard belt widths are available in steps of 76.1 mm (3.00 in). dditional non-standard belt widths are available in steps of 12.7 mm (0.50 in) General belt tolerance is +0/-0.4% at 23 C/73 F and 50% RH. For exact belt width contact Customer Service. Non standard belt width on request. *Max. Load per Drive Sprocket. elt material: POM-D 1400 N (315 lbf). PP 1100 N (247 lbf). PE 1100 N (247 lbf). **Max. Spacing between wear strips. Carry: 152 mm (6 in); Return: 304 mm (12 in). = Single Link 7
8 Datasheet: uni SN M2 34% ccessories Rubber Top K600 C M2 20% Flat elt material & color K750 Rubber material & color PP 03 K Non Standard material and color: See uni Material and Color Overview. ccessories Flight C Link Width mm in mm in mm in size mm in K K PP W 03 N K H Front side: Flat ack side: Non Stick M2 20% Flat Non Stick ccessories Tab / Single Link Only Flight Material & color PP-I W PE N Flights on 25.4 mm (1 in) are cut down from 50.8 mm (2 in). H Width Link size mm in mm in K E Z V M2 34% ottom Guide Tab Material & color POM-D PP Non Standard material and color: See uni Material and Color Overview. V Z Width Link size mm in mm in mm in mm in mm in K K K K K
9 Datasheet: uni SN M2 34% ccessories Rollers NON STNDRD C D Roller material & color C D E mm in mm in mm in mm in mm in Plastic POM-D W Non Standard material and color: See uni Material and Color Overview. ccessories mflight H 1 H H 2 Photo will be updated Material & color H H 1 H 2 mm in mm in mm in Push PE W Other Non Standard option: See uni mflight Overview. W (elt width) C mm min in min C PI max W W PI PI min Increment: 12.7 mm (0.50 in). 9
10 Datasheet: uni SN M2 34% Sprocket No. of teeth Pilot ore in mm ore size Overall diameter Pitchdiameter Hubdiameter -dimension -dimension mm in mm in mm in mm in mm in Single row/two way Double row/two way Molded P6 LG Machined P6 N Z10 x x x Z12 x x x Z18 x x x Z18 x x x Z19 x x x Z19 x x x Z20 x x x Z20 x x x Molded sprocket Molded sprocket Non standard material and color: See uni Material and Color Overview. Other sprocket sizes are available upon request. Two-part sprocket are available upon request. Round bores are always delivered with keyway. Other bore sizes are available upon request. uni Retainer Rings: See uni Retainer Ring data sheet. Width of tooth = 6.0 mm (0.24 in) Width of sprocket = 25.0 mm (0.98 in) Max load per sprocket shown does not take bore size into account. Please also ensure that sufficient size shaft is chosen for corresponding load. For correct sprocket position: See uni ssembly Instructions for uni SN. For more detailed sprocket information. contact Customer Service. uni SN M2 20%/ Conveyor elts Seamless elts Modular elts Timing elts Expert advice, quality solutions and local service for all your belting needs This information is subject to alteration due to continuous development. mmeraal eltech will not be held liable for the incorrect use of the above stated information. This information replaces previous information. ll activities performed and services rendered by mmeraal eltech are subject to general terms and conditions of sale and delivery, as applied by its operating companies. Transmission elts Fabrication & service mmeraal eltech Modular /S Hjulmagervej 21 DK-7100 Vejle T F admin@unichains.com 10
11 Datasheet: uni SN M2 34% Rib EN Plastic Modular elt Series uni SN M2 34% Rib elt material & color POM-SLF PP Pin material & color PP elt width Permissible tensile force (elt/pin material) P P (Nominal) L R T Straight running belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Rib Top Surface opening: 34% ackflex radius: 30.0 mm (1.20 in) Pin diameter: 5 mm (0.20 in) mm in mm in R L T Non standard material and color: See uni Material and Color Overview. lternative pin and lock materials: Pin: P6.6 SS304 Endlock: PP Lockpin: PP W PT LG P6.6 D N PE N elt weight (elt/pin material) POM-SLF/PP PP/PP POM-SLF/PP PP/PP mm in N lbf N lbf Kg/m Ib/ft Kg/m Ib/ft *Min. No. drive sprocket per shaft Number of wear strips (Min. No.) **Carry (pcs) **Return (pcs) PITCH 25.4 MM/1.00 IN STRIGHT STNDRD RUNNING STNDRD dditional standard belt widths are available in steps of 76.1 mm (3.00 in). dditional non-standard belt widths are available in steps of 12.7 mm (0.50 in) dditional standard belt widths are available in steps of 76.1 mm (3.00 in). dditional non-standard belt widths are available in steps of 12.7 mm (0.50 in) General belt tolerance is +0/-0.4% at 23 C/73 F and 50% RH. For exact belt width contact Customer Service. Non standard belt width on request. *Max. Load per Drive Sprocket. elt material: POM-D 1400 N (315 lbf), PP 1100 N (247 lbf). **Max. Spacing between wear strips, Carry: 152 mm (6 in); Return: 304 mm (12 in). = Single Link 11
12 Datasheet: uni SN M2 34% Rib ccessories Finger Plates Snap-On Cover Caps G Snap-On Cover Caps G F E I E M N O H Slider C D J 2S 2 2S Material & color C D E F mm in mm in mm in mm in mm in mm in Single Sided Single Sided POM-EC K G H I J M N O mm in mm in mm in mm in mm in mm in mm in ll uni-chains belt systems are available in a raised rib version that can be supplied with matc h ing finger plates also called combs. The finger plates are supplied with cover caps which can be attached when the finger plate has been installed. The cover caps can be removed by using a screwdriver that can be in serted between the cover and finger plate. In order to adjust to belt width variations caused by temperature fluctuations. a slider facilitates the sideways movement of the finger plates. Non Standard material and color: See uni Material and Color Overview. 12
13 Datasheet: uni SN M2 34% Rib Sprocket No. of teeth Pilot ore in mm ore size Overall diameter Pitchdiameter Hubdiameter -dimension -dimension mm in mm in mm in mm in mm in Single row/two way Double row/two way Molded P6 LG Machined P6 N Z10 x x x Z12 x x x Z18 x x x Z18 x x x Z19 x x x Z19 x x x Z20 x x x Z20 x x x Molded sprocket Molded sprocket Non standard material and color: See uni Material and Color Overview. Other sprocket sizes are available upon request. Two-part sprocket are available upon request. Round bores are always delivered with keyway. Other bore sizes are available upon request. uni Retainer Rings: See uni Retainer Ring data sheet. Width of tooth = 6.0 mm (0.24 in) Width of sprocket = 25.0 mm (0.98 in) Max load per sprocket shown does not take bore size into account. Please also ensure that sufficient size shaft is chosen for corresponding load. For correct sprocket position: See uni ssembly Instructions for uni SN. For more detailed sprocket information. contact Customer Service. 13
14 Datasheet: uni SN M2 34% Rib Conveyor elts Seamless elts Modular elts Timing elts Expert advice, quality solutions and local service for all your belting needs This information is subject to alteration due to continuous development. mmeraal eltech will not be held liable for the incorrect use of the above stated information. This information replaces previous information. ll activities performed and services rendered by mmeraal eltech are subject to general terms and conditions of sale and delivery, as applied by its operating companies. Transmission elts Fabrication & service uni SN M2 34% Rib/ mmeraal eltech Modular /S Hjulmagervej 21 DK-7100 Vejle T F admin@unichains.com 14
15 Datasheet: uni SN M2 50% EN Plastic Modular elt Series uni SN M2 50% elt material & color P6.6 PP PP W G Pin material & color PP PP W Non standard material and color: See uni Material and Color Overview. lternative pin and lock materials: Lockpin: PT LG P6.6 D N PP W PE N elt width Permissible tensile force (elt/pin material) P L P (Nominal) elt weight (elt/pin material) PP/PP P6.6/PP PP/PP P6.6/PP mm in N lbf N lbf kg/m lb/ft kg/m lb/ft T Straight running belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Flat Surface opening: 50% ackflex radius: 30.0 mm (1.20 in) Pin diameter: 5 mm (0.20 in) mm in mm in L T *Min. No. drive sprocket per shaft Number of wear strips (Min. No.) **Carry (pcs) **Return (pcs) PITCH 25.4 MM/1.00 IN STRIGHT RUNNING STNDRD dditional standard belt widths are available in steps of 76.1 mm (3.00 in). dditional non-standard belt widths are available in steps of 12.7 mm (0.50 in) dditional standard belt widths are available in steps of 76.1 mm (3.00 in). dditional non-standard belt widths are available in steps of 12.7 mm (0.50 in) General belt tolerance is +0/-0.4% at 23 C/73 F and 50% RH. For exact belt width contact Customer Service. Non standard belt width on request. elt widths in P66 is 0,2 % wider than the belt widths in the table above. *Max. Load per Drive Sprocket. elt material: PP 1100 N (247 lbf); P N (315 lbf). **Max. Spacing between wear strips, Carry: 152 mm (6 in.) ; Return: 304 mm (12 in). = Single Link 15
16 Datasheet: uni SN M2 50% ccessories Rollers NON STNDRD C D E Photo will be updated Roller material & color C D E mm in mm in mm in mm in mm in Plastic POM-D W Non Standard material and color: See uni Material and Color Overview. ccessories mflight H 1 H H 2 Photo will be updated Material & color H H 1 H 2 mm in mm in mm in Push PE W Other Non Standard option: See uni mflight Overview. W (elt width) mm in C min min C PI max W W PI PI min Increment: 12.7 mm (0.50 in). 16
17 Datasheet: uni SN M2 50% Sprocket No. of teeth Pilot ore in mm ore size Overall diameter Pitchdiameter Hubdiameter -dimension -dimension mm in mm in mm in mm in mm in Single row/two way Double row/two way Molded P6 LG Machined P6 N Z10 x x x Z12 x x x Z18 x x x Z18 x x x Z19 x x x Z19 x x x Z20 x x x Z20 x x x Molded sprocket Molded sprocket Non standard material and color: See uni Material and Color Overview. Other sprocket sizes are available upon request. Two-part sprocket are available upon request. Round bores are always delivered with keyway. Other bore sizes are available upon request. uni Retainer Rings: See uni Retainer Ring data sheet. Width of tooth = 6.0 mm (0.24 in) Width of sprocket = 25.0 mm (0.98 in) Max load per sprocket shown does not take bore size into account. Please also ensure that sufficient size shaft is chosen for corresponding load. For correct sprocket position: See uni ssembly Instructions for uni SN. For more detailed sprocket information. contact Customer Service. 17
18 Datasheet: uni SN M2 50% Conveyor elts Seamless elts Modular elts Timing elts Expert advice, quality solutions and local service for all your belting needs This information is subject to alteration due to continuous development. mmeraal eltech will not be held liable for the incorrect use of the above stated information. This information replaces previous information. ll activities performed and services rendered by mmeraal eltech are subject to general terms and conditions of sale and delivery, as applied by its operating companies. Transmission elts Fabrication & service uni SN M2 50%/ mmeraal eltech Modular /S Hjulmagervej 21 DK-7100 Vejle T F admin@unichains.com 18
19 Local Contacts ustria T info-de@ammeraalbeltech.com India T info-in@ammeraalbeltech.com Sweden T info-se@ammeraalbeltech.com elgium T info-be@ammeraalbeltech.com Italy T info-it@ammeraalbeltech.com Switzerland T info-ch@ammeraalbeltech.com Canada T info-ca@ammeraalbeltech.com Luxembourg T info-lu@ammeraalbeltech.com Thailand T info-th@ammeraalbeltech.com Chile T info-cl@ammeraalbeltech.com Malaysia T info-my@ammeraalbeltech.com United Kingdom T info-uk@ammeraalbeltech.com China T info-cn@ammeraalbeltech.com.cn Netherlands T info-nl@ammeraalbeltech.com United States T info-us@ammeraalbeltech.com Czech Republic T info-cz@ammeraalbeltech.com Denmark T info-dk@ammeraalbeltech.com Poland T info-pl@ammeraalbeltech.com Portugal T info-pt@ammeraalbeltech.com Vietnam T info-vn@ammeraalbeltech.com.vn Expert advice, quality solutions and local service for all your belting needs Finland T info-fi@ammeraalbeltech.com Singapore T info-sg@ammeraalbeltech.com Conveyor elts Timing elts France T info-fr@ammeraalbeltech.com Germany T info-de@ammeraalbeltech.com Hungary T info-hu@ammeraalbeltech.com Slovakia T info-sk@ammeraalbeltech.com South Korea T info-kr@ammeraalbeltech.com Spain T info-es@ammeraalbeltech.com Global Headquarters: mmeraal eltech Holding.V. P.O. ox Heerhugowaard The Netherlands T +31 (0) F +31 (0) info@ammeraalbeltech.com Seamless elts Modular elts Transmission elts Fabrication & service... and 150 more service contact points on Date:
Ammeraal Beltech Modular
Ammeraal Beltech Modular Innovative belt and chain solutions for every industry & application Content uni Guide Rings page 3-4 uni Retainer Rings page 5-6 uni Idler page 7-8 atasheet: uni Guide Rings Accessories
More informationAmmeraal Beltech Modular
mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni MP C page 3-6 uni MP 16% page 7-10 uni MP 18% page 11-14 uni MP 20% page 15-18
More informationAmmeraal Beltech Modular
eraal eltech Modular Innovative belt and cha solutions for every dustry & application www.unichas.com ontent uni M-SN M2 14% page 3-4 uni M-SN M3 14% page 5-6 Datasheet: uni M-SN M2 14% EN lastic Modular
More informationuni Spiral Belting Experience Food Grade Products Global Technical Support www.ammeraalbeltech.com
uni Spiral Belting Experience Food Grade Products Global Technical Support The Ammeraal Beltech reputation guarantees complete customer satisfaction. We can present many references, as seeing is believing!
More informationAmmeraal Beltech Modular
Ammeraal Beltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni Flex SNB C 2.3 page 3-10 uni Flex SNB C 1.6 page 11-18 uni Flex SNB 2.3 page
More informationAccuracy counts! SENSORS WITH ANALOG OUTPUT
Accuracy counts! SENSORS WITH ANALOG OUTPUT OTHER APPLICATIONS: KEY ADVANTAGES: Distance measurement Positioning Profile detection Deformation monitoring Vibration monitoring Process monitoring Detection
More informationMake the invisible visible! SENSORS WITH EXCELLENT BACKGROUND SUPPRESSION
Make the invisible visible! SENSORS WITH EXCELLENT BACKGROUND SUPPRESSION photoelectric sensors Thanks to its vision for innovation and technological enhancement, Contrinex keeps on setting new standards
More informationForeign Taxes Paid and Foreign Source Income INTECH Global Income Managed Volatility Fund
Income INTECH Global Income Managed Volatility Fund Australia 0.0066 0.0375 Austria 0.0045 0.0014 Belgium 0.0461 0.0138 Bermuda 0.0000 0.0059 Canada 0.0919 0.0275 Cayman Islands 0.0000 0.0044 China 0.0000
More information41 T Korea, Rep. 52.3. 42 T Netherlands 51.4. 43 T Japan 51.1. 44 E Bulgaria 51.1. 45 T Argentina 50.8. 46 T Czech Republic 50.4. 47 T Greece 50.
Overall Results Climate Change Performance Index 2012 Table 1 Rank Country Score** Partial Score Tendency Trend Level Policy 1* Rank Country Score** Partial Score Tendency Trend Level Policy 21 - Egypt***
More informationSpeed sensor MiniCoder GEL 247
Speed sensor MiniCoder GEL 47 Flange assembly Technical information version 08.0 The MiniCoder family from Lenord + Bauer offers spacesaving solutions for the contactless measurement of rotational movements
More informationReporting practices for domestic and total debt securities
Last updated: 4 September 2015 Reporting practices for domestic and total debt securities While the BIS debt securities statistics are in principle harmonised with the recommendations in the Handbook on
More informationCisco 2-Port OC-3/STM-1 Packet-over-SONET Port Adapter
Data Sheet Cisco 2-Port OC-3/STM-1 Packet-over-SONET Port Adapter To meet the continual need for increased router features and performance, Cisco Systems introduces its newest packetover-sonet (POS) port
More informationWorld Consumer Income and Expenditure Patterns
World Consumer Income and Expenditure Patterns 2014 14th edi tion Euromonitor International Ltd. 60-61 Britton Street, EC1M 5UX TableTypeID: 30010; ITtableID: 22914 Income Algeria Income Algeria Income
More informationrelating to household s disposable income. A Gini Coefficient of zero indicates
Gini Coefficient The Gini Coefficient is a measure of income inequality which is based on data relating to household s disposable income. A Gini Coefficient of zero indicates perfect income equality, whereas
More informationSTATISTICS FOR THE FURNITURE INDUSTRY AND TRADE
STATISTICS FOR THE FURNITURE INDUSTRY AND TRADE Möbel Zahlen Daten STATISTICS FOR THE FURNITURE INDUSTRY AND TRADE 01/36 Economical growth in the regions of the world-economy Changes of the gross domestic
More informationCOMMUNICATION FROM THE COMMISSION
EUROPEAN COMMISSION Brussels, 17.9.2014 C(2014) 6767 final COMMUNICATION FROM THE COMMISSION Updating of data used to calculate lump sum and penalty payments to be proposed by the Commission to the Court
More informationALLROUNDER 420 C GOLDEN EDITION
Facts and figures ALLROUNDER C GOLDEN EDITION Distance between tie bars: x mm Clamping force: 1 kn Injection unit (acc. to EUROMAP): 29 www.arburg.com C GOLDEN EDITION Machine dimensions 85 33 125 195
More informationPUBLIC VS. PRIVATE HEALTH CARE IN CANADA. Norma Kozhaya, Ph.D Economist, Montreal economic Institute CPBI, Winnipeg June 15, 2007
PUBLIC VS. PRIVATE HEALTH CARE IN CANADA Norma Kozhaya, Ph.D Economist, Montreal economic Institute CPBI, Winnipeg June 15, 2007 Possible private contribution Possible private contribution in the health
More informationuni-chains Belt Catalogue
unichains Belt Catalogue 2002, unichains A/S. Copying or reproduction of this catalogue is prohibited without written permission. unichains reserves the right to make changes without notice. he drawings
More informationPUBLIC & PRIVATE HEALTH CARE IN CANADA
PUBLIC & PRIVATE HEALTH CARE IN CANADA by Norma Kozhaya, Ph.D. Economist, Montreal Economic Institute before the Canadian Pension & Benefits Institute Winnipeg - June 15, 2007 Possible private contribution
More informationGlobal Economic Briefing: Global Inflation
Global Economic Briefing: Global Inflation August 7, Dr. Edward Yardeni -97-7 eyardeni@ Debbie Johnson -- djohnson@ Mali Quintana -- aquintana@ Please visit our sites at www. blog. thinking outside the
More informationReport on Government Information Requests
Report on Government Information July 1 - December 31, 2014 apple Apple takes our commitment to protecting your data very seriously and we work incredibly hard to deliver the most secure hardware, software
More informationOCTOBER 2010. Russell-Parametric Cross-Sectional Volatility (CrossVol ) Indexes Construction and Methodology
OCTOBER 2010 Russell-Parametric Cross-Sectional Volatility (CrossVol ) Indexes Construction and Methodology SEPTEMBER 2010 Russell-Parametric Cross-Sectional Volatility (CrossVol) Indexes Construction
More informationHow To Build A Powerline Box Powerline Generator
Quick Reference Guide DYNAMIC Series Dynamic Series is a broad product family that provides connector solutions ranging from signal level circuitry through power circuit connectivity in a ruggedized, industrialized
More informationReport on Government Information Requests
Report on Government Information July 1 - December 31, 2015 Apple takes our commitment to protecting your data very seriously and we work incredibly hard to deliver the most secure hardware, software and
More informationHow To Get A New Phone System For Your Business
Cisco Phone Systems Telemarketing Script Cold Call 1. Locate Contact: Name listed Owner General Manager / Office Manager Chief BDM (Business Decision Maker) Note: Avoid talking to IT since this is not
More informationConfiguring DHCP for ShoreTel IP Phones
Configuring DHCP for ShoreTel IP Phones Network Requirements and Preparation 3 Configuring DHCP for ShoreTel IP Phones The ShoreTel server provides the latest application software and configuration information
More informationQuantum View Manage Administration Guide
2010 United Parcel Service of America, Inc. UPS, the UPS brandmark and the color brown are trademarks of United Parcel Service of America, Inc. All rights reserved. Quantum View Manage Administration Guide
More informationBT Premium Event Call and Web Rate Card
BT Managed Event and BT Self-Managed Event (also referred to as Express, Plus and Premium) Conference Bridge and Call for Booked Audio Conferencing Services will comprise the following for each phone-conference:
More informationEnglish version. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 4162 2012 ICS: 49.030.20 English version Aerospace series Screws 100 countersunk normal head, offset cruciform recess, coarse tolerance normal shank,
More informationHong Kong s Health Spending 1989 to 2033
Hong Kong s Health Spending 1989 to 2033 Gabriel M Leung School of Public Health The University of Hong Kong What are Domestic Health Accounts? Methodology used to determine a territory s health expenditure
More informationSupported Payment Methods
Supported Payment Methods Global In the global payments market, credit cards are the most popular payment method. However, BlueSnap expands the payment selection by including not only the major credit
More informationM8 / M12 CONNECTOR SYSTEM
M8 / M12 CONNECTOR SYSTEM EVERY CONNECTION COUNTS TE CONNECTIVITY S M8 / M12 Connector System for machine industrial automation and control applications provides a solution that safely and reliably ensures
More informationAppendix 1: Full Country Rankings
Appendix 1: Full Country Rankings Below please find the complete rankings of all 75 markets considered in the analysis. Rankings are broken into overall rankings and subsector rankings. Overall Renewable
More informationSupported Payment Methods
Sell Globally in a Snap Supported Payment Methods Global In the global payments market, credit cards are the most popular payment method. However, BlueSnap expands the payment selection by including not
More informationDSV Air & Sea, Inc. Aerospace Sector. DSV Air & Sea, Inc. Aerospace
DSV Air & Sea, Inc. Aerospace Sector DSV Air & Sea, Inc. Aerospace Introduction to DSV DSV is a global supplier of transport and logistics services. We have offices in more than 70 countries and an international
More informationGlobal Effective Tax Rates
www.pwc.com/us/nes Global s Global s April 14, 2011 This document has been prepared pursuant to an engagement between PwC and its Client. As to all other parties, it is for general information purposes
More informationThe value of accredited certification
Certified Once Accepted Everywhere The value of accredited certification Survey Report Published May 212 In 21/11, the IAF carried out a global survey to capture market feedback on the value of certification.
More informationInternational Call Services
International Call Services Affordable rates for business calls. Wherever you are in the world. We ve got plenty to say when it comes to staying in touch when you re overseas. We have agreements with 443
More informationWorking Holiday Maker visa programme report
Working Holiday Maker visa programme report 30 June 2015 This page is left blank intentionally. Table of Contents About this report 1 Enquiries 1 Definition of terms 2 Background to the Working Holiday
More informationCisco Blended Agent: Bringing Call Blending Capability to Your Enterprise
DATA SHEET Cisco Blended Agent: Bringing Call Blending Capability to Your Enterprise Cisco ICM software has traditionally enabled companies to distribute inbound service volume to a variety of termination
More informationThe word teamster today means a truck driver,
Page 47 Heron of Alexandria The word teamster today means a truck driver, but originally it meant a wagon driver, someone who drives a team of horses, mules or oxen. Over 2000 years ago teamsters in the
More informationQuickSpecs. HP Wireless Keyboard and Mouse. Models
Overview 1. Wireless Keyboard 2. USB Wireless Transceiver 3. Wireless Mouse Models QY449AA Introduction The combine a cordless keyboard, cordless laser mouse, and USB wireless receiver in a single package.
More informationHow many students study abroad and where do they go?
From: Education at a Glance 2012 Highlights Access the complete publication at: http://dx.doi.org/10.1787/eag_highlights-2012-en How many students study abroad and where do they go? Please cite this chapter
More informationLawson Business Intelligence. Solutions for Healthcare
Solutions for Healthcare Help is On the Way Lawson Business Intelligence You know the feeling. It s a case of TMI Too Much Information on a company-wide scale. Too often, you re forced to wade through
More informationDesigning and Drawing a Sprocket Visualizing ideas through the creation of CAD solid models is a key engineering skill.
05 Webster St. Hanover Massachusetts 0339 Tel. 78 878 5 Fax 78 878 6708 Designing and Drawing a Sprocket Visualizing ideas through the creation of CAD solid models is a key engineering skill. The following
More informationGet the benefits of Norgren s unique range of Online services
Get the benefits of Norgren s unique range of Online services Make your job easier and save time - everything you need to select, design and purchase Norgren pneumatics is in one convenient location, available
More informationCisco IOS Public-Key Infrastructure: Deployment Benefits and Features
Data Sheet Cisco IOS Public-Key Infrastructure: Deployment Benefits and Features Introduction to Public Key Infrastructure Public Key Infrastructure (PKI) offers a scalable method of securing networks,
More informationAxioma Risk Monitor Global Developed Markets 29 June 2016
Axioma Risk Monitor Global Developed Markets 29 June 2016 1. Global volatility hotspots 2. Global correlation hotspots www.axioma.com Greater than 1% rise over last week Greater than 1% fall over last
More informationSenate Committee: Education and Employment. QUESTION ON NOTICE Budget Estimates 2015-2016
Senate Committee: Education and Employment QUESTION ON NOTICE Budget Estimates 2015-2016 Outcome: Higher Education Research and International Department of Education and Training Question No. SQ15-000549
More informationQUICK REFERENCE DATA. Pilkor components FEATURES APPLICATIONS
MKP RADIAL POTTED CAPACITORS Pitch 10.0/15.0/22.5/27.5 mm QUICK REFERENCE DATA Capacitance range (E6 series) * 0.01μF to 3.3μF Capacitance tolerance ±10 %, ±20 % Rated (AC) voltage 50 to 60 Hz 275 V ~
More informationDiode, Schottky SMB/DO-214AA. Page <1> 24/04/08 V1.1. Dimensions Inches (Millimeters)
Features: For surface mounted application. Metal to silicon rectifier, majority carrier conduction. Low forward voltage drop. Easy pick and place. High surge current capability. Plastic material. Epitaxial
More informationLayher. Keder Roof and Hall System. F a s t. L i g h t w e i g h t. C o s t e f f e c t i v e.
Weather protection in lightweight design, made of aluminium Verified structural strength Certification according to DIN ISO 9001/EN 29 001 by TÜV-CERT Keder Roof and Hall System F a s t. L i g h t w e
More informationValu Guide Sheaths. Valu Guide Inserts. Optional Valu Guide Inserts. Typical Properties of Valu Guide Rail. and Hardware.
14 gauge stainless steel The Original, Long Life Sanitary Guide Rail Valu Guide rail incorporates two outstanding materials: stainless steel and UHMW. The 14 ga. stainless steel sheath provides rigid streamlined
More informationOverview of FAA Bilateral Agreements
Overview of FAA Bilateral Agreements Presented to: Aviation Suppliers Association Conference By: Chris Carter, Manager, AIR International Office Date: June 16, 2014 Objective Discuss the challenges that
More informationBelt Drives and Chain Drives. Power Train. Power Train
Belt Drives and Chain Drives Material comes for Mott, 2002 and Kurtz, 1999 Power Train A power train transmits power from an engine or motor to the load. Some of the most common power trains include: Flexible
More informationMERCER S COMPENSATION ANALYSIS AND REVIEW SYSTEM AN ONLINE TOOL DESIGNED TO TAKE THE WORK OUT OF YOUR COMPENSATION REVIEW PROCESS
MERCER S COMPENSATION ANALYSIS AND REVIEW SYSTEM AN ONLINE TOOL DESIGNED TO TAKE THE WORK OUT OF YOUR COMPENSATION REVIEW PROCESS MERCER S COMPENSATION ANALYSIS AND REVIEW SYSTEM www.imercer.com/cars Mercer
More informationPRESENTATION. www.retezy-vam.com ŘETĚZY VAMBERK
PRESENTATION www.retezy-vam.com ŘETĚZY VAMBERK Where to find us? Dresden (D) - Zinnwald - Georgenfeld (D) E 55 Zinnwald (D) - Teplice (CZ) E 55 Teplice (CZ) - Praha (CZ) E 55 Praha (CZ) - Hradec Králové
More informationTo install the I/O Module Board: 1. Remove AC power from decoder.
Installation Data (Catalog Number 2755-NB0, -NB1, -NB2) This document shows how to install the following components in the 2755-DSxx ➀ and 2755-DDxx ➀ Bar Code Decoders. I/O Module Board (Catalog No. 2755-NB1
More informationExercise 39. The Euro. At the end of this exercise you will:
Exercise 39 The Euro At the end of this exercise you will: Know how the Euro was named Know the countries using the Euro Be able to name all the Euro notes Be able to name all the Euro coins Be able to
More informationAgilent 87421A/87422A Power Supply
Agilent 87421A/87422A Power Supply Technical Overview Designed specifically for Agilent Technologies microwave system amplifiers Bias cable permits remote placement Compact size for easy system integration
More informationfilm capacitors QUICK REFERENCE DATA Pilkor components FEATURES APPLICATIONS 10 and 15mm 22.5 and 27.5mm
MKP RADIAL POTTED CAPACITORS Pitch 10.0/15.0/22.5/27.5/37.5mm 10 and 15mm 22.5 and 27.5mm QUICK REFERENCE DATA Capacitance range (E6 series) * Capacitance tolerance Rated (AC) voltage 50 to 60 Hz Climatic
More informationWorking Holiday Maker visa programme report. 31 December 2014
Working Holiday Maker visa programme report 31 December 2014 Contents Page About this report 1 Enquiries 1 Definition of terms 2 Background to the Working Holiday Maker programme 3 Recent developments
More informationAbout us. As our customer you will be able to take advantage of the following benefits: One Provider. Flexible Billing. Our Portal.
About us At RoamingExpert we specialise in mobile roaming tariffs which are tailored to the specific needs of the yachting industry. Our unique offering generates significant savings when compared to standard
More informationby knürr CoolTherm Server cabinet technology with outstanding benefits up to 35kW cooling capacity Blade-Server server optimized! www.knuerr.
HIGH DENSITY COOLING SOLUTIONS by knürr CoolTherm Server cabinet technology with outstanding benefits up to 35kW cooling capacity Blade-Server server optimized! optimiert! Setting benchmarks. Being the
More informationNI USB-6008/6009 OEM USER GUIDE
USER GUIDE NI USB-6008/6009 OEM This document provides information about the dimensions, connectors, and other components of the National Instruments USB-6008/6009 OEM device. For more information about
More informationFredriksons conveyor systems handle goods with a width from 20 mm up to 600 mm.
Conveyor Solutions Whatever your logistic needs, we can offer a conveyor solution. Our flexible systems primary and secondary packaging for single and multi packages, can transport your goods from one
More informationIFS ApplIcAtIonS For ElEctronIc components xxxxxxxxxxxxx
IFS Applications for ELECTRONIC COMPONENTS xxxxxxxxxxxxx OUR SOLUTION S DNA When we first set out to create IFS Applications over 25 years ago, our goal was to make the most usable business software on
More informationResponding to Healthcare s Most Urgent Business Issues. Gundersen Lutheran Health System Case Study
Responding to Healthcare s Most Urgent Business Issues Gundersen Lutheran Health System Case Study Gundersen Lutheran Health System case study Surgical Instrument Management Reduces Surgery Delays and
More informationCONTENTS --------------------------------------------------------------------------------------
en WiFi USB DONGLE CONTENTS -------------------------------------------------------------------------------------- 9 SAFETY AND SET-UP 10 WiFi USB DONGLE 10 Packing contents 10 Special features 10 Connection
More informationHow do you manage the brain of the business in a way that supports the opportunities your organisation wants to take advantage of?
As the world becomes a more competitive place, businesses need to respond at lightning speed to take advantage of new opportunities or avoid risks. To enable this, the data centre needs to be a dynamic
More informationImage Lab Software How to Obtain Stain-Free Gel and Blot Images. Instructions
Image Lab Software How to Obtain Stain-Free Gel and Blot Images Instructions Table of Contents Obtaining Stain-Free Gel images...1 5 Obtaining Stain-Free Blot Images...6 9 If the Gel Doc XR+ or ChemiDoc
More informationOverview menu: ArminLabs - DHL Medical Express Online-Pickup: Access to the Online System
Access to the Online System Overview menu: Create shipment: Preselected - Here you can order your shipment including the Pickup 0049 821 78093150 ArminLabs DHL Medical Express Online-Pickup-Manual DHL
More informationThe big pay turnaround: Eurozone recovering, emerging markets falter in 2015
The big pay turnaround: Eurozone recovering, emerging markets falter in 2015 Global salary rises up compared to last year But workers in key emerging markets will experience real wage cuts Increase in
More informationGlobal AML Resource Map Over 2000 AML professionals
www.pwc.co.uk Global AML Resource Map Over 2000 AML professionals January 2016 Global AML Resources: Europe France Italy Jersey / Guernsey 8 Ireland 1 Portugal 7 Luxembourg 5 United Kingdom 1 50 11 Spain
More informationHCF4010B HEX BUFFER/CONVERTER (NON INVERTING)
HEX BUFFER/CONVERTER (NON INVERTING) PROPAGATION DELAY TIME: t PD = 50ns (Typ.) at V DD = 10V C L = 50pF HIGH TO LOW LEVEL LOGIC CONVERSION MULTIPLEXER: 1 TO 6 OR 6 TO 1 HIGH "SINK" AND "SOURCE" CURRENT
More informationCash machine withdrawal in the EU (+Norway and Iceland)
Cash machine withdrawal in the EU (+Norway and Iceland) Country Is it free of charge to go to a cash machine from a different bank than consumers own to withdraw money? If withdrawal is not free of charge,
More informationCisco Conference Connection
Data Sheet Cisco Conference Connection Cisco IP Communications a comprehensive system of powerful, enterprise-class solutions including IP telephony, unified communications, IP video/audio conferencing,
More informationHow To Install A Gel Doc Xr+ Camera On A Computer Or Mouse Or Tv (For A Powerbook) With A Zoom Lens (For An Ipa) With An Iphone Or Ipa (For Mac) With The Zoom Lens
Molecular Imager Gel Doc XR+ Installation Guide To install your Gel Doc XR+, perform these seven steps in the following order: 1. Unpack the Gel Doc XR+ system. 2. Install Image Lab software. 3. Set up
More informationE-Seminar. Financial Management Internet Business Solution Seminar
E-Seminar Financial Management Internet Business Solution Seminar Financial Management Internet Business Solution Seminar 3 Welcome 4 Objectives 5 Financial Management 6 Financial Management Defined 7
More informationBelt Conveyor Tracking V-Guide vs. Crowned Roller
Belt Conveyor Tracking V-Guide vs. Crowned Roller By: Michael A. Hosch P.E. Dorner Mfg. Corp. 1 One of the largest maintenance issues associated with belt conveyors is belt tracking. Belt tracking is the
More informationTHE WORLD S LEADING CAR DESIGN MAGAZINE
THE WORLD S LEADING CAR DESIGN MAGAZINE DISTRIBUITED IN MORE THAN 60 COUNTRIES EUROPE: Austria, Belgium, Cyprus, Denmark, Finland, France, Germany, United Kingdom, Greece, Ireland, Iceland, Italy, Latvia,
More informationNoise Monitoring Software, version 7.0 Types 7802 and 7840
PRODUCT DATA Noise Monitoring Software, version 7.0 Types 7802 and 7840 The basic software packages Noise Monitoring Software Types 7802 and 7840 are the central point in any Brüel & Kjær noise monitoring
More informationNetFlow Feature Acceleration
WHITE PAPER NetFlow Feature Acceleration Feature Description Rapid growth in Internet and intranet deployment and usage has created a major shift in both corporate and consumer computing paradigms. This
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 21-47 High Street, Feltham, Middlesex, TW13 4UN, UK
Schedule of United Kingdom Service 21-47 High Street, Feltham, Middlesex, TW13 4UN, UK ISO/IEC 17021:2011 to provide environmental management systems certification Kitemark Court Davy Avenue Knowlhill
More informationWe decided that we would build IFS Applications on standards so our customers would not be locked into any particular technology. We still do.
IFS Applications for Shipbuilding 2 ifs shipbuilding OUR SOLUTION S DNA When we first set out to create IFS Applications over 25 years ago, our goal was to make the most usable business solution on the
More informationCISCO CONTENT SWITCHING MODULE SOFTWARE VERSION 4.1(1) FOR THE CISCO CATALYST 6500 SERIES SWITCH AND CISCO 7600 SERIES ROUTER
PRODUCT BULLETIN NO. 2438 CISCO CONTENT SWITCHING MODULE SOFTWARE VERSION 4.1(1) FOR THE CISCO CATALYST 6500 SERIES SWITCH AND CISCO 7600 SERIES ROUTER NEW FEATURES New features of the Cisco Content Switching
More informationCISCO IP PHONE SERVICES SOFTWARE DEVELOPMENT KIT (SDK)
DATA SHEET CISCO IP PHONE SERVICES SOFTWARE DEVELOPMENT KIT (SDK) Cisco Systems IP Phone Services bring the power of the World Wide Web to Cisco IP Phones. An integral part of a Cisco AVVID (Architecture
More informationEUF STATISTICS. 31 December 2013
. ESTIMATES OF EU TURNOVER VOLUMES. Turnover volumes by product, allocation and notification (Estimates of EU s, Millions of ) Estimate of the EU % on Turnover Significance of the sample on total turnover
More informationFAQs for Two-factor Authentication
FAQs for Two-factor Authentication Two-factor Authentication 1. What is two-factor authentication? Two-factor authentication is an authentication scheme that increases online security by relying on a combination
More informationBrochure More information from http://www.researchandmarkets.com/reports/1339929/
Brochure More information from http://www.researchandmarkets.com/reports/1339929/ The 2011 World Forecasts of Machine Tools That Remove Material by Laser or Light, Photon, Ultrasonic, Electro-Discharge,
More informationThe Age of Cloud Computing
Information Anywhere! The Cloud, Internet of things and Your Data!! 7 Parker groups! 50,000 employees serving 500,000 customers with 1,000,000 products in almost 50 countries 13 around the world.! $ 3
More informationHCF4001B QUAD 2-INPUT NOR GATE
QUAD 2-INPUT NOR GATE PROPAGATION DELAY TIME: t PD = 50ns (TYP.) at V DD = 10V C L = 50pF BUFFERED INPUTS AND OUTPUTS STANDARDIZED SYMMETRICAL OUTPUT CHARACTERISTICS QUIESCENT CURRENT SPECIFIED UP TO 20V
More informationstyle guide jewels HOW TO STYLE THE PROFILE CORNER IN THE A, B, C POSITION THE STARTKIT FOR PROFILE CORNER CONSISTS OF
136 STYLE GUIDE / JEWELS JEWELS / STYLE GUIDE 137 style guide jewels HOW TO STYLE THE PROFILE CORNER IN THE A, B, C POSITION THE STYLE GUIDE FOR JEWELLERY: Each satellite can be styled in both silver and
More informationENTERING THE EU BORDERS & VISAS THE SCHENGEN AREA OF FREE MOVEMENT. EU Schengen States. Non-Schengen EU States. Non-EU Schengen States.
ENTERING THE EU BORDERS & VISAS THE SCHENGEN AREA OF FREE MOVEMENT An area without internal borders where EU citizens and non-eu nationals may move freely EU Schengen States Non-Schengen EU States IS Azores
More informationImage Lab Software for the GS-900 Densitometer
Image Lab Software for the GS-900 Densitometer Quick Start Guide Catalog # 170-9690 Bio-Rad Technical Support For help and technical advice, please contact the Bio-Rad Technical Support department. In
More informationPLAN PRICE GUIDE 74.99. Allowance 50GB Data, unlimited minutes, unlimited texts, inclusive Roaming in selected countries 1,2, 200 084
PLAN PRICE GUIDE Pay Monthly For new and upgrading customers from 27th April 2016 EE Complete 24 month plans 74.99 79.99 84.99 Allowance 50GB Data, unlimited minutes, unlimited texts, inclusive Roaming
More informationWELCOME! Introduction. Celebrating. &PrimeRevenue. PrimeRevenue Hong Kong. 2012 PrimeRevenue, Inc.
WELCOME! Introduction Celebrating Ethe Factor Network establishment of &PrimeRevenue PrimeRevenue Hong Kong 2012 PrimeRevenue, Inc. Global Reach Today, we transact business in 50 countries Our platform
More informationReport on Government Information Requests
Report on Government Information January 1 - June 30, 2015 Apple takes our commitment to protecting your data very seriously and we work incredibly hard to deliver the most secure hardware, software and
More information