OWNER S MANUAL LED TV (CINEMA 3D Smart TV)

Transcription

1 OWNER S MANUAL LED TV (CINEMA 3D Smart TV) LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating the your TV and retain it for future reference. 27MT93V 27MT93S

2 2 TABLE OF CONTENTS TABLE OF CONTENTS 3 LICENSES 32 REMOTE CONTROL 4 INSTALLATION PROCEDURE 5 ASSEMBLING AND PREPARING 5 Unpacking 7 - Separate purchase 9 Parts and buttons 10 Lifting and moving the TV 11 Setting up the TV 11 - Attaching the Stand 12 - Mounting on a table 13 - Tidying cables 14 - Detaching the Stand 15 WATCHING TV 15 Turning the TV on for the first time 17 MAKING CONNECTIONS 17 Connecting an antenna 18 Satellite connection 19 Connecting to a HD receiver, DVD, VCR player or Gaming device 19 - HDMI connection 20 - HDMI to DVI connection 21 - Component connection 22 - Composite connection 23 - Euro Scart connection 24 - Headphone connection 25 Connecting to a USB 26 Connecting to a CI Module 27 MHL connection 28 Connecting to a wired network 29 Connecting to a PC 30 - HDMI connection 31 - HDMI to DVI connection 34 MAGIC REMOTE CONTROL FUNCTIONS 35 Registering Magic Remote Control 35 How to use Magic Remote Control 35 Precautions to Take when Using the Magic Remote Control 36 USING THE USER GUIDE 37 MAINTENANCE 37 Cleaning Your TV 37 Screen and frame 37 Cabinet and stand 37 Power cord 38 Preventing Image burn or Burn-in on your TV screen 39 IF THE QUALITY OF THE 3D IMAGE IS NOT ACCEPTABLE, CHECK THE FOLLOWING 40 VIEWING 3D IMAGING 42 TROUBLESHOOTING 42 General 42 Using 3D mode 43 SPECIFICATIONS

3 LICENSES 3 LICENSES Supported licenses may differ by model. For more information of the licenses, visit Manufactured under license from Dolby Laboratories. Dolby and the double-d symbol are trademarks of Dolby Laboratories. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. ABOUT DIVX VIDEO: DivX is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration. DivX Certified to play DivX video up to HD 1080p, including premium content. DivX, DivX Certified and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license. Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274 Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the Symbol, & DTS and the Symbol together are registered trademarks & DTS 2.0 Channel is a trademark of DTS, Inc. Product includes software. DTS, Inc. All Rights Reserved.

4 4 INSTALLATION PROCEDURE INSTALLATION PROCEDURE 1 Open the package and make sure all the accessories are included. 2 Attach the stand to the TV. 3 Connect an external device to the TV. yimage shown may differ from your TV. yyour TV s OSD (On Screen Display) may differ slightly from that shown in this manual. ythe available menus and options may differ from the input source or product model that you are using. ynew features may be added to this TV in the future.

5 ASSEMBLING AND PREPARING 5 ASSEMBLING AND PREPARING Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. ythe accessories supplied with your product may vary depending on the model. yproduct specifications or contents in this manual may be changed without prior notice due to upgrade of product functions. CAUTION ydo not use any pirated items to ensure the safety and product life span. yany damages or injuries by using pirated items are not covered by the warranty.

6 6 ASSEMBLING AND PREPARING ⱞⳮ ➎Ẳ㞢 EDFN VPDUW /Q.MENU /Q.MENU ⰶ YRO Remote control Batteries (AAA) ᗺ S Magic Remote Control. Batteries (AA) CD (Owner's Manual)/Cards or Power Cord Component video cable Screw Cover AC-DC Adapter Composite audio/video cable Screws 2 EA MHL passive cable Stand Base Cable holder or 3D Glasses(Normal type 2 EA) - The number of 3D glasses may differ depending on the model or country. - Image shown may differ from your TV. Isolator (Depending on the country)

7 /Q.MENU ASSEMBLING AND PREPARING 7 Separate purchase Dual play glasses AG-F2**DP, AG-F3**DP Magic Remote Control AN-MR400 ythe illustrations in this manual may differ from the actual product and accessories. yseparate purchase items can be changed or modified for quality improvement without any notification. ycontact your dealer to buying these items. ythe model name or design may be changed depending on the upgrade of product functions,manufacturer s circumstances or policies.

8 8 ASSEMBLING AND PREPARING yantenna Isolator Installation Guide -- Use this to install TV in a place where there is a voltage difference between TV Set and GND of antenna signal.»» If there is a voltage difference between TV Set and GND of antenna signal, the antenna contact might be heated and excessive heat might cause an accident. -- You can improve the safety when watching TV by efficiently removing power voltage from TV antenna. It is recommended to mount the isolator to the wall. If it cannot be mounted to the wall, mount it on the TV. Avoid disconnecting the antenna Isolator after installation. -- Before starting, be sure that the TV antenna is connected. Wall 1. Connect to TV. ANTENNA/ CABLE IN or Cable / Antenna Isolator 2. Connect to Set-Top box. Connect one end of the isolator to cable/antenna jack and the other to TV set or set-top box. Equipment connected to the protective earthing of the building installation through the mains connection or through other equipment with a connection to protective earthing - and to a cable distribution system using coaxial cable, may in some circumstances create a fire hazard. Connection to a cable distribution system has therefore to be provided through a device providing electrical isolation below a certain frequency range (galvanic isolator, see EN ) When applying the RF Isolator, a slight loss of signal sensitivity can occur.

9 ASSEMBLING AND PREPARING 9 Parts and buttons Remote Control Sensor Standby Light ylighting On: Turned off ylighting Off: Turned on Touch buttons on the bottom of the TV AUDIO IN(PC) HP (19 V ) COMPONENT IN AV2 IN / AUDIO L R HDMI IN 13/18 V 700 ma Max LND IN 5 V 0.5 A 5 V 1.0 A Connection panel (See p.17) Touch button Description Scrolls through the saved programmes. Adjusts the volume level. OK Selects the highlighted menu option or confirms an input. SETTINGS Accesses the main menus, or saves your input and exits the menus. INPUT Changes the input source. / I Turns the power on or off. All of the buttons are touch sensitive and can be operated through simple touch with your finger.

10 10 ASSEMBLING AND PREPARING Lifting and moving the TV When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for save transportation regardless of its type and size. ywhen holding the TV, the screen should face away from you to prevent the screen from scratches. CAUTION Avoid touching the screen at all times, as this may result in damage to the screen or some of the pixels used to create images. yit is recommended to move the TV in the box or packing material that the TV originally came in. ybefore moving or lifting the TV, disconnect the power cord and all cables. yhold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area. ywhen transporting the TV, do not expose the TV to jolts or excessive vibration. ywhen transporting the TV, keep the TV upright, never turn the TV on its side, or tilt towards the left or right.

11 ASSEMBLING AND PREPARING 11 Setting up the TV Attaching the Stand 1 Place the TV with the screen side down on a flat and cushioned surface. 2 Check the orientation (front and rear) of the stand base and mount the stand base to the stand hinge as shown in the figure. CAUTION ylay a foam mat or soft protective cloth on the surface to protect the screen from damage. ywhen attaching the stand to the TV, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. 3 Fix two screws into the back of the stand base and close the screw cover. CAUTION Tighten the screws firmly to prevent the TV from tilting forward. Do not over tighten.

12 12 ASSEMBLING AND PREPARING Mounting on a table 1 Lift and tilt the TV into its upright position on a table. Leave a 10 cm (4 inches) (minimum) space from the wall for proper ventilation. 10 cm 10 cm 10 cm 10 cm 2 Connect the AC-DC Adapter and Power Cord to a wall outlet. CAUTION Do not place the TV near or on sources of heat, as this may result in fire or other damage.

13 ASSEMBLING AND PREPARING 13 WARNING When you adjust the angle, do not hold the buttom of the TV frame as shown on the following illustration, as may injure your fingers. : : : CAUTION Disconnect the power cord first, and then move or install the TV. Otherwise electric shock may occur. Tidying cables 1 Attach the cable holder to the edge of stand body securely. 2 Gather and bind the cables with the supplied cable holder. Tilt from +20 to -5 degrees up or down to adjust the angle of the TV to suit your view CAUTION After attachment, if the cable holder is pulled with excessive force, it may fall off. Front Rear :

14 14 ASSEMBLING AND PREPARING Using the Kensington security system Detaching the Stand The Kensington security system connector is located at the back of the TV. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit 1 Place the TV with the screen side down on a flat and cushioned surface. Connect the Kensington security system cable between the TV and a table. The Kensington security system is optional. You can obtain additional accessories from most electronics stores. CAUTION ylay a foam mat or soft protective cloth on the surface to protect the screen from damage. ywhen detaching the stand to the TV, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. 2 Open the screw cover on the back of the stand base and use a screwdriver to remove the two screws. Detach the stand base from the stand hinge as shown in the figure.

15 WATCHING TV 15 WATCHING TV Turning the TV on for the first time When you access the TV for the first time, the initial setting screen appears. Select a language and customize the basic settings. 1 Connect the power cord to a power outlet. 2 Press on the TV or power button on the remote control to turn the TV on. The Standby Light is turned off. 3 The initial setting screen appears if you access the TV for the first time. If you do not operate the TV within 40 seconds when the setting menu screen appears, the setting menus will disappear. 4 Follow the on-screen instructions to customize your TV according to your preferences. yfor those countries without confirmed DTV broadcasting standards, some DTV features might not work, depending on the DTV broadcasting environment. ywhen France is selected for Country, the initial password is not 0, 0, 0, 0 but 1, 2, 3, 4. yto display images in the best quality for your home environment, select Home Use mode. ystore Demo mode is suitable for the retail environment. yif you select Store Demo mode, the previously customized settings will switch to the default settings of Store Demo mode in 5 minutes.

16 16 WATCHING TV 5 When the basic settings are complete, press OK. If you do not complete the initial setting, it will appear whenever you access the TV. 6 To turn the TV off, press on the TV. The Standby Light is turned on. CAUTION Disconnect the power cord from the power outlet when you do not use the TV for a long period of time. You can also access Factory Reset by accessing OPTION in the main menus.

17 MAKING CONNECTIONS 17 MAKING CONNECTIONS Connect various external devices to the TV and switch input modes to select an external device. For more information about an external device s connection, refer to the manual supplied with each device. Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, camcorders or cameras, gaming devices, and other external devices. yif you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input cable to the TV through a DVD recorder or VCR. For more information about recording, refer to the manual supplied with the connected device. ythe external device connection may differ from the model. yconnect external devices to the TV regardless of the order of the TV port. Connecting an antenna Connect an antenna, cable or cable box to watch TV referring to the following. The illustrations may differ from the actual accessories and an RF cable is optional. Connect the TV to a wall antenna socket with an RF cable (75 Ω). (Not Provided) Wall Antenna Socket yuse a signal splitter to use more than 2 TVs. yif the image quality is poor, install a signal amplifier properly to improve the image quality. yif the image quality is poor with an antenna connected, aim the antenna to the proper direction. yvisit for more information about the antenna and cable connection. CAUTION ymake sure not to bend the copper wire of the RF cable. Copper wire Outdoor Antenna yvhf Antenna yuhf Antenna ycomplete all connections instructions between devices, and then connect the power cord to the power outlet to prevent damages to your TV.

18 18 MAKING CONNECTIONS Satellite connection Connect the TV to a satellite dish to a satellite socket with a satellite RF cable (75 Ω). 13/18 V 700 ma Max LND IN (Not Provided)

19 MAKING CONNECTIONS 19 Connecting to a HD receiver, DVD, VCR player or Gaming device Connect a HD receiver, DVD, VCR player or Gaming device to the TV and select an appropriate input mode. HDMI connection HDMI is the best way to connect a device. Transmits the digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown on the following illustration. yuse a High Speed HDMI Cable. yhigh Speed HDMI Cables are tested to carry an HD signal up to 1080p and higher. ysupported DTV Audio: MPEG, Dolby Digital. ysupported HDMI Audio format: DTS, Dolby Digital, PCM (Up to 192 KHz, 32k/44.1k/48k/88k/96k/176k/ 192k.) ychoose any HDMI input port to connect. yit does not matter which port you use. DVD / Blu-Ray / HD Cable Box / HD STB / Gaming device (Not Provided) AUDIO IN(PC) HP (19 V ) COMPONENT IN AV2 IN / AUDIO L R HDMI IN 13/18 V 700 ma Max LND IN 5 V 0.5 A 5 V 1.0 A

20 20 MAKING CONNECTIONS HDMI to DVI connection Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the HDMI to DVI cable as shown in the following illustration. To transmit an audio signal, connect an optional audio cable. If you do not use an optional external speaker, connect the external device to the TV with the optional audio cable. DVD / Blu-Ray / HD Cable Box / HD STB / Gaming device (Not Provided) AUDIO IN(PC) HP (19 V ) COMPONENT IN AV2 IN / AUDIO L R HDMI IN 13/18 V 700 ma Max LND IN 5 V 0.5 A 5 V 1.0 A

21 MAKING CONNECTIONS 21 Component connection Transmits the analog video and audio signals from an external device to the TV. Connect the external device and the TV with the component cable as shown on the following illustration. To display images by using progressive scan, make sure to use the component cable. yif cables are installed incorrectly, it could case the image to display in black and white or with distorted color. ycheck to ensure the cable are matched with the corresponding color connection. AUDIO IN(PC) HP (19 V ) COMPONENT IN AV2 IN / AUDIO L R HDMI IN 13/18 V 700 ma Max LND IN 5 V 0.5 A 5 V 1.0 A (Use the component video cable provided) (Use the composite audio/video cable provided) (Not Provided) (Not Provided) DVD / Blu-Ray / HD Cable Box / HD STB / Gaming device

22 22 MAKING CONNECTIONS Composite connection Transmits the analog video and audio signals from an external device to the TV. Connect the external device and the TV with the composite cable as shown on the following illustration. Check to ensure the cable are matched with the corresponding color connection. AUDIO IN(PC) HP (19 V ) COMPONENT IN AV2 IN / AUDIO L R HDMI IN 13/18 V 700 ma Max LND IN 5 V 0.5 A 5 V 1.0 A (Use the composite audio/video cable provided) (Not Provided) DVD / Blu-Ray / HD Cable Box / HD STB / Gaming device

23 MAKING CONNECTIONS 23 Euro Scart connection Transmits the video and audio signals from an external device to the TV. Connect the external device and the TV with the Euro Scart cable as shown on the following illustration. To display images by using progressive scan, make sure to use the Euro Scart cable. Current input mode Output Type AV1 (TV Out 1 ) Digital TV Digital TV O Analogue TV, AV Component HDMI Analogue TV AV1 (When DTV scheduled recording is in progress using recording equipment.) O (The input mode is converted to DTV.) 1 TV Out : Outputs Analogue TV or Digital TV signals. yany Euro scart cable used must be signal shielded. ywhen watching digital TV in 3D imaging mode, TV out signals cannot be output through the SCART cable. yif you set the 3D mode to On while a scheduled recording is performed on digital TV, monitor out signals cannot be output through the SCART cable, and the recording cannot be performed. AUDIO IN(PC) HP (19 V ) COMPONENT IN AV2 IN / AUDIO L R HDMI IN 13/18 V 700 ma Max LND IN 5 V 0.5 A 5 V 1.0 A (Not Provided) DVD / Blu-Ray / HD Cable Box

24 24 MAKING CONNECTIONS Headphone connection Transmits the headphone signal from the TV to an external device. Connect the TV with the headphone as shown on the following illustration. yaudio menu items are disabled when connecting a headphone. ywhen changing AV MODE with a headphone connected, the change is applied to video but not to audio. yheadphone impedance: 16 ymax audio output of headphone: 10 mw to 15 mw yheadphone jack size: 0.35 cm AUDIO IN(PC) HP (19 V ) COMPONENT IN AV2 IN / AUDIO L R HDMI IN 13/18 V 700 ma Max LND IN 5 V 0.5 A 5 V 1.0 A (Not Provided) Headphone

25 MAKING CONNECTIONS 25 Connecting to a USB Connect a USB storage device such as s USB flash memory, external hard drive, MP3 player or a USB memory card reader to the TV and access the USB menu to use various multimedia files. ysome USB Hubs may not work. If a USB device connected using a USB Hub is not detected, connect it to the USB port on the TV directly. AUDIO IN(PC) HP (19 V ) COMPONENT IN AV2 IN / AUDIO L R HDMI IN 13/18 V 700 ma Max LND IN 5 V 0.5 A 5 V 1.0 A USB (Not Provided)

26 26 MAKING CONNECTIONS Connecting to a CI Module View the encrypted (pay) services in digital TV mode. This feature is not available in all countries. ycheck if the CI module is inserted into the PCMCIA card slot in the right direction. If the module is not inserted properly, this can cause damage to the TV and the PCMCIA card slot. yif the TV does not display any video and audio when CI+ CAM is connected, please contact to the Terrestrial/Cable/Satellite Service Operator. (Not Provided) PCMCIA Card

27 MAKING CONNECTIONS 27 MHL connection Mobile High-definition Link (MHL) is an interface for transmitting digital audiovisual signals from mobile phones to television sets. yconnect the mobile phone to the HDMI IN 1(MHL) port to view the phone screen on the TV. ythe MHL passive cable is needed to connect the TV and a mobile phone. ythis only works for the MHL-enabled phone. ysome applications can be operated by the remote control. yfor some mobile phones supporting MHL, you can control with the magic remote control. yremove the MHL passive cable from the TV when: - the MHL function is disabled - your mobile device is fully charged instandby mode AUDIO IN(PC) HP (19 V ) COMPONENT IN AV2 IN / AUDIO L R HDMI IN 13/18 V 700 ma Max LND IN 5 V 0.5 A 5 V 1.0 A Mobile phone

28 28 MAKING CONNECTIONS Connecting to a wired network Connect the TV to a local area network (LAN) via the LAN port as shown on the following illustration and set up the network settings. After making a physical connection, a small number of home networks may require the TV network settings to be adjusted. For most home networks, the TV will connect to automatically without any adjustments. For detail information, contact your internet provider or router manual. CAUTION ydo not connect a modular phone cable to the LAN port. ysince there are various connection methods, please follow the specifications of your telecommunication carrier or internet service provider. AUDIO IN(PC) HP (19 V ) COMPONENT IN AV2 IN / AUDIO L R HDMI IN 13/18 V 700 ma Max LND IN 5 V 0.5 A 5 V 1.0 A (Not Provided)

29 MAKING CONNECTIONS 29 Connecting to a PC Your TV supports the Plug & Play* feature and has the built-in speakers with Virtual Surround that reproduces sound clearly with a rich bass. * Plug & Play: The function when a PC recognizes a connected device that users connect to a PC and turn on, without device configuration or user intervention. yit is recommended to use the TV with the HDMI connection for the best image quality. yif you do not use an optional external speaker, connect the PC to the TV with the optional audio cable. yif you turn the TV on when the set becomes cold, the screen may flicker. This is normal. ysome red, green, or blue spots may appear on the screen. This is normal. ydo not press the screen with your finger for a long time as this may result in temporary distortion on the screen. yavoid displaying a fixed image on the screen for a long period of time to prevent image burn. Use a screensaver if possible. yif you want to use HDMI-PC mode, you must set the input label to PC mode.

30 30 MAKING CONNECTIONS HDMI connection Transmits the digital video and audio signals from your PC to the TV. Connect the PC and the TV with the HDMI cable as shown in the following illustrations. You should set PC as an input label to connect the PC to the TV with an HDMI connection. yuse a High Speed HDMI Cable. yhigh Speed HDMI Cables are tested to carry an HD signal up to 1080p and higher. yif you want to use HDMI-PC mode, you must set the input label to PC mode. ysupported DTV Audio: MPEG, Dolby Digital. ysupported HDMI Audio format: DTS, Dolby Digital, PCM(Up to 192 KHz, 32k/44.1k/48k/88k/96k/176k/ 192k.) ychoose any HDMI input port to connect. yit does not matter which port you use. PC (Not Provided) AUDIO IN(PC) HP (19 V ) COMPONENT IN AV2 IN / AUDIO L R HDMI IN 13/18 V 700 ma Max LND IN 5 V 0.5 A 5 V 1.0 A

31 MAKING CONNECTIONS 31 HDMI to DVI connection Transmits the digital video signal from your PC to the TV. Connect the PC and the TV with the HDMI to DVI cable as shown the following illustrations. To transmit an audio signal, connect an optional audio cable. yif you want to use HDMI-PC mode, you must set the input label to PC mode. yif you do not use an optional external speaker, connect the PC to the TV with the optional audio cable. PC (Not Provided) AUDIO IN(PC) HP (19 V ) COMPONENT IN AV2 IN / AUDIO L R HDMI IN 13/18 V 700 ma Max LND IN 5 V 0.5 A 5 V 1.0 A

32 32 REMOTE CONTROL REMOTE CONTROL The descriptions in this manual are based on the buttons of the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. CAUTION Do not mix old and new batteries, as this may damage the remote control. Make sure to point the remote control to the remote control sensor on the TV. Image shown may differ from your TV. (POWER) Turns the TV on or off. TV/RAD Selects Radio, TV and DTV programme. Q.MENU Accesses the quick menus. Number buttons Enters numbers. SUBTITLE INPUT Selects the input mode. GUIDE Shows programme guide. INFO Views the information of the currently program and the screen. LIST Displays the programme table. Q.VIEW Returns to the previously viewed programme. + - Adjusts the volume level. PAGE P Selects a programme. PAGE Moves to the previous or next screen. FAV Displays the selected favourite programme. 3D Uses for viewing 3D video. MUTE Mutes all sounds.

33 REMOTE CONTROL 33 SMART Accesses the HOME menu. Teletext buttons These buttons are used for teletext. Navigation buttons Scrolls through menus or options. APP/* Select the MHP TV menu source. (Only Italy) (Depending on model) OK Selects menus or options and confirms your input. MY APPS MY APPS Shows the list of Apps. BACK Returns to the previous level. EXIT Clears all on-screen displays and return to TV viewing. SETTINGS Accesses the main menus. REC Start to record and display record menu. Control buttons Controls the SIMPLINK compatible devices (USB, SIMPLINK). Coloured buttons These access special functions in some menus. On MHEG channel, you cannot adjust the backlight with the yellow or blue key.

34 34 MAGIC REMOTE CONTROL FUNCTIONS MAGIC REMOTE CONTROL FUNCTIONS When the message Magic Remote Control battery is low. Change the battery. is displayed, replace the battery. To replace batteries, open the battery cover, replace batteries (1.5 V AA) matching and ends to the label inside the compartment, and close the battery cover. Be sure to point the remote control toward the remote control sensor on the TV. To remove the batteries, perform the installation actions in reverse. CAUTION Do not mix old and new batteries, as this may damage the remote control. (POWER) Turns the TV on or off. BACK Returns to the previous level. Wheel(OK) Selects menus or options and confirms your input. Scrolls through the saved programmes. If you press the navigation button while moving the pointer on the screen, the pointer disappears, and the Magic Remote Control works as a regular remote control. To display the pointer again, shake the Magic Remote Control from side to side. 3D Used for viewing 3D video. BACK P SMART Pointer (RF transmitter) Navigation buttons (up/down/left/ right) Scrolls through menus or options. SMART Accesses the Smart Home menus. /Q.MENU Voice recognition /Q.MENU Accesses the quick menus. Accesses the Universal Control. + - Adjusts the volume level. ꕌPꕍ Scrolls through the saved programmes or channels. MUTE Mutes all sounds. 1 2 If you press Wheel(OK) on the Magic Remote Control, the following screen appears. Shows information about the current programmes and screen. Pressing this button will display number keypad which you can select programme number. 3 You can select My Apps Menu. 3

35 MAGIC REMOTE CONTROL FUNCTIONS 35 Registering Magic Remote Control It is necessary to pair (register) the magic remote control to your TV before it will work. How to register the Magic Remote Control BACK HOME P MY APPS 1 To register automatically, turn the TV on and press the Wheel(OK) button. When registration is completed, the completion message appears on the screen. 2 If registration fails, turn the TV off and back on, then press the Wheel(OK) button to complete registration. How to re-register the Magic Remote Control BACK SMART 1 Press and hold the BACK and SMART buttons together for 5 seconds to reset, then register it by following How to register the Magic Remote Control above. 2 To re-register the Magic Remote Control, press and hold the BACK button for 5 seconds toward the TV. When registration is completed, the completion message appears on the screen. Precautions to Take when Using the Magic Remote Control yuse the Magic Remote Control within the maximum communication distance (10 m). Using the Magic Remote Control beyond this distance, or with an object obstructing it, may cause a communication failure. ya communication failure may occur due to nearby devices. Electrical devices such as a microwave oven or wireless LAN product may cause interference, as these use the same bandwidth (2.4 GHz) as the Magic Remote Control. ythe Magic Remote Control may be damaged or may malfunction if it is dropped or receives a heavy impact. ytake care not to bump into nearby furniture or other people when using the Magic Remote Control. ymanufacturer and installer cannot provide service related to human safety as the applicable wireless device has possibility of electric wave interference. yit is recommended that an Access Point (AP) be located more than 1 m away from the TV. If the AP is installed closer than 1 m, the Magic Remote Control may not perform as expected due to frequency interference. How to use Magic Remote Control 1 If the pointer disappears, move the Magic Remote Control slightly to left or right. Then, it will automatically appear on the screen.»» If the pointer has not been used for a certain period of time, it will disappear. 2 You can move the pointer by aiming the Pointer Receiver of the Magic Remote Control at your TV then move it left, right, up or down.»» If the pointer does not work properly, leave the Magic Remote Control for 10 seconds then use it again.

36 36 USING THE USER GUIDE USING THE USER GUIDE User Guide allows you to more easily access the detailed TV information. 1 Press the SMART button to access the Smart Home menu. 2 Select User Guide and press Wheel(OK). yimage shown may differ from your TV. OPTION > To set language SMART Settings OPTION Language Selects Menu Language and Audio Language displayed on the screen. 1 Menu Language Selects a language for the display text. [In Digital Mode Only] Audio Language When watching a digital broadcast containing several audio languages, you can select the language you want. [In Digital mode Only] Use the Subtitle function when two or more subtitle Subtitle languages are broadcast. Language If subtitle data in a selected language is not broadcast, the default language subtitle will be displayed. Try Now 2 Close User Guide User Guide 1 Shows the description of the selected menu. You can use to move between pages. 2 Moves to the selected menu directly from the User Guide. 1 User Guide 3 To use input device To set time options PROGRAMME Setting PICTURE, SOUND Setting OPTION LG SMART Function Advanced Function Information 2 To set TV lock options To set language To set country Disabled Assisstance To set Magic remote control Index Online User Guide Shows the current watching programme or input source screen. 2 Allows to select the category you want. 3 Allows to select the item you want. You can use ꕌ/ꕍto move between pages. 4 Allows to browse the description of the function you want from the index. 5 Provides the detailed information on the functions of LG Smart TV when the Internet is connected. (It may not be available depending on the country/language.)

37 MAINTENANCE 37 MAINTENANCE Cleaning Your TV Clean your TV regularly to keep the best performance and to extend the product lifespan. CAUTION ymake sure to turn the power off and disconnect the power cord and all other cables first. ywhen the TV is left unattended and unused for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges. Screen and frame To remove dust, wipe the surface with a dry and soft cloth. To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild detergent. Then wipe immediately with a clean and dry cloth. CAUTION ydo not push, rub, or hit the surface with your fingernail or a sharp object, as this may result in scratches on the screen and image distortions. ydo not use any chemicals, such as waxes, benzene, alcohol, thinners, insecticides, air fresheners, lubricants, as these may damage the screen s finish and cause discolorations. Cabinet and stand To remove dust, wipe the cabinet with a dry and soft cloth. To remove major dirt, wipe the cabinet with a soft cloth dampened in a clean water or water containing a small amount of mild detergent. CAUTION ydo not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or malfunction. ydo not use any chemicals as this may deteriorate the surface. Power cord Remove the accumulated dust or dirt on the power cord regularly.

38 38 MAINTENANCE Preventing Image burn or Burn-in on your TV screen yif a fixed image displays on the TV screen for a long period of time, it will be imprinted and become a permanent disfigurement on the screen. This is image burn or burn-in and not covered by the warranty. yif the aspect ratio of the TV is set to 4:3 for a long period of time, image burn may occur on the letterboxed area of the screen. yavoid displaying a fixed image on the TV screen for a long period of time (2 or more hours for LCD/ LED) to prevent image burn.

39 3D 39 IF THE QUALITY OF THE 3D IMAGE IS NOT ACCEPTABLE, CHECK THE FOLLOWING 1) Viewing distance For optimal 3D viewing distance, please see the table below. Please maintain the optimal viewing distance for the best 3D experience. 2) Viewing angle For optimal 3D viewing angles, see the table below. 3) Check the 3D display sequence (L-R, R-L) The display method may vary due to the 3D content type. Try changing the display method to L-R or R-L for a better viewing experience Remain at the optimal viewing distance from the Cinema 3D TV. Adjust the Cinema 3D TV angle and your position to achieve the optimal viewing angle. Adjust the position of the screen to minimise reflections. Keep your lower arms horizontal and gently rest your hands on the keyboard. Model Mode Dimension 27MT93V 27MT93S When viewing 3D images Monitor's allowed 3D viewing distance Monitor's optimal 3D viewing distance Optimal viewing angle 69.0 cm 55 cm to 500 cm 100 cm 12

40 40 3D VIEWING 3D IMAGING WARNING Viewing Environment yviewing Time -- When watching 3D contents, take 5-15 minute breaks every hour. Viewing 3D contents for a long period of time may cause headache, dizziness, fatigue or eye strain. Viewing Age yinfants/children -- Usage/ Viewing 3D contents for children under the age of 5 are prohibited. -- Children under the age of 10 may overreact and become overly excited because their vision is in development (for example: trying to touch the screen or trying to jump into it. Special monitoring and extra attention is required for children watching 3D contents. -- Children have greater binocular disparity of 3D presentations than adults because the distance between the eyes is shorter than one of adults. Therefore they will perceive more stereoscopic depth compared to adults for the same 3D image. y Teenagers -- Teenagers under the age of 19 may react with sensitivity due to stimulation from light in 3D contents. Advise them to refrain from watching 3D contens for a long time when they are tired. y Elderly -- The elderly may perceive less 3D effect compared to the youth. Do not sit closer to the TV than the recommended distance. Those that have a photosensitive seizure or chronic illness y Some users may experience a seizure or other abnormal symptoms when they are exposed to a flashing light or particular pattern from 3D contents. y Do not watch 3D videos if you feel nausea, are pregnant and/ or have a chronic illness such as epilepsy, cardiac disorder, or blood pressure disease, etc. y 3D Contents are not recommended to those who suffer from stereo blindness or stereo anomaly. Double images or discomfort in viewing may be experienced. y If you have strabismus (cross-eyed), amblyopia (weak eyesight) or astigmatism, you may have trouble sensing depth and easily feel fatigue due to double images. It is advised to take frequent breaks than the average adult. y If your eyesight varies between your right and left eye, revise your eyesight prior to watching 3D contents. Symptoms which require discontinuation or refraining from watching 3D contents y Do not watch 3D contents when you feel fatigue from lack of sleep, overwork or drinking. y When these symptoms are experienced, stop using/watching 3D contents and get enough rest until the symptom subsides. -- Consult your doctor when the symptoms persist. Symptoms may include headache, eyeball pain, dizziness, nausea, palpitation, blurriness, discomfort, double image, visual inconvenience or fatigue.

41 3D 41 CAUTION Viewing Environment y Viewing Distance - Maintain a distance of at least twice the screen diagonal length when watching 3D contents. If you feel discomfort in viewing 3D contents, move further away from the TV. Cautions when using the 3D glasses y Make sure to use LG 3D glasses. Otherwise, you may not be able to view 3D videos properly. y Do not use 3D glasses instead of your normal glasses, sunglasses or protective goggles. y Using modified 3D glasses may cause eye strain or image distortion. y Do not keep your 3D glasses in extremely high or low temperatures. It will cause deformation. y The 3D glasses are fragile and are easy to be scratched. Always use a soft, clean piece of cloth when wiping the lenses. Do not scratch the lenses of the 3D glasses with sharp objects or clean/wipe them with chemicals.

42 42 TROUBLESHOOTING TROUBLESHOOTING General Problem Cannot control the TV with the remote control. No image display and no sound is produced. The TV turns off suddenly. Resolution y Check the remote control sensor on the product and try again. y Check if there is any obstacle between the product and the remote control. ycheck if the batteries are still working and properly installed ( to, to ). y Check if the product is turned on. y Check if the power cord is connected to a wall outlet. y Check if there is a problem in the wall outlet by connecting other products. ycheck the power control settings. The power supply may be interrupted. y Check if the Auto sleep feature is activated in the Time settings. y If there is no signal while the TV is on, the TV will turn off automatically after 15 minutes of inactivity. Using 3D mode Problem If you can see a swirling oil-like pattern on the TV when the TV is turned off. If you are not using the glasses provided with the TV. If you view 3D images outside the optimal viewing angle or distance. Resolution This is caused by the interference of external light in the air layer between the LCD/LED surface and 3D filter. The pattern becomes almost invisible when you turn on the power again. When you view 3D images with this TV, it is very important that you use the glasses provided with the TV. The glasses are designed to compensate optically for the 3D filter attached to the surface of the TV. If you wear third-party glasses, you may not see 3D images properly on the TV. When you view 3D images outside the optimal viewing angle or viewing distance, the images may look overlapped or not be displayed properly in 3D. Notes for Viewing 3D Image with 3D Digital Brodcating *In Analogue Brodcating, 3D Imaging does not work. Problem When switching the 2D image display to the 3D image display with the 3D button on the remote control, the overlapped image may be displayed. If the screen is divided into left/right or top/bottom when you change the channel Resolution y Disable the 3D imaging mode with the 3D button. y This channel supports the 3D imaging mode. Select the 3D imaging type displayed on the screen by pressing the 3D button on the remote control. If your eyes are sore or the screen looks blurry while viewing 3D images. Select Left/Right or Right/Left option, which you find better for viewing 3D images.

43 SPECIFICATIONS 43 SPECIFICATIONS Product specifications may be changed without prior notice due to upgrade of product functions. Wireless LAN module(twfm-b006d) specification Standard Frequency Range Modulation Output Power (Typical) Data rate Antenna Gain (Typical) IEEE802.11a/b/g/n 2400 to MHz 5150 to 5250 MHz CCK / OFDM / MIMO a: 11 dbm b: 15 dbm g: 13 dbm n - 2.4GHz: 13 dbm n - 5GHz: 13 dbm a/g: 54 Mbps b: 11 Mbps n: 300 Mbps 2400 to MHz: 2.5dBi 5150 to 5250 MHz: 2.2dBi Occupied bandwidth a/b/g: HT n: HT20/40 y Because band channel used by the country could be different, the user can not change or adjust the operating frequency and this product is set for the regional frequency table. Bluetooth module (BM-LDS401) specification Standard Bluetooth Version 3.0 Frequency Range Output Power (Max.) Data rate (Max.) Communication Distance 2400 ~ MHz 10 dbm or lower 3 Mbps Line of Open Sight approx. 10 m

44 44 SPECIFICATIONS Television system Programme coverage Maximum number of storable programmes Digital TV DVB-T(*DVB-T/T2) DVB-C DVB-S/S2 VHF, UHF C-Band, Ku-Band DVB-S/S2 : 6,000 DVB-T/T2/C & Analogue TV : 1,500 Analogue TV PAL/SECAM B/G/I/D/K SECAM L/L VHF: E2 to E12, UHF : E21 to E69, CATV: S1 to S20, HYPER: S21 to S47 * : Only DVB-T2 support models Panel Screen Type 690 mm Wide (27 inch) Visible diagonal size : 690 mm Pixel Pitch mm (H) x mm (V) Video Signal Max. Resolution Hz Input Connector Recommended Resolution Horizontal Frequency Vertical Frequency Synchronization Type Hz 30 khz to 83 khz 58 Hz to 62 Hz Digital Power Rated Voltage 19 V 3.2 A AC/DC Adapter Power Consumption Tilt Tilt Range -5 to 20 Dimensions (Width x Depth x Height) Weight Environmental conditions Operating Temperature Operating Humidity Storage Temperature Storage Humidity TV, PC Audio In, Component, AV1(SCART), AV2(CVBS), HDMI*2, USB*3, PCMCIA, LAN JACK On Mode : 38 W (typ.) Off Mode 0.5 W Manufacturer: LG Innotek, Model PSAB-L206A With Stand mm x mm x mm 5.2 kg Without Stand mm x 66.8 mm x mm 4.7 kg 10 C to 35 C 20 % to 80 % -10 C to 60 C 5 % to 90 % Product specifications shown above may be changed without prior notice due to upgrade of product functions.

45 SPECIFICATIONS 45 HDMI (PC) supported mode Component port connecting information Resolution Horizontal Frequency(kHz) Vertical Frequency(Hz) 640 x x x x x x x x x Component ports on the TV Video output ports on DVD player Y P B P R Y P B P R Y B-Y R-Y Y Cb Cr Y Pb Pr Signal 480i/576i 480p/576p 720p/1080i 1080p Component O O O O (50 Hz / 60 Hz only) HDMI (DTV) supported mode Resolution Horizontal Frequency(kHz) 720X Vertical Frequency(Hz) X X X

46 46 SPECIFICATIONS yavoid keeping a fixed image on the set s screen for prolonged periods of time. The fixed image may become permanently imprinted on the screen. Use a screen saver when possible. ythere may be interference relating to resolution, vertical pattern, contrast or brightness in PC mode. Change the PC mode to another resolution or change the refresh rate to another rate or adjust the brightness and contrast on the menu until the picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic card. ythe synchronization input waveform for Horizontal and Vertical frequencies are separate. yconnect the audio cable from the PC to the Audio input on the TV. (Audio cables are not included with the TV). yif using a sound card, adjust PC sound as required. ydos mode may not work depending on the video card if you use an HDMI to DVI cable.

47 SPECIFICATIONS 47 3D supported mode yvideo, which is input as below media contents is switched into the 3D screen automatically. ythe method for 3D digital broadcast may differ depending on the signal environment. If video is not switched automatically into 3D, manually convert the settings to view 3D images. Input HDMI Signal 640 X p 576p 720p 1080i 1080p Horizontal Frequency (khz) 3D supported mode automatically Vertical Frequency (Hz) Playable 3D video format / 31.5 Top & Bottom, Side by Side(Half), Side by Side(Full) / 63 Frame Packing, Line Alternative / 60 Top & Bottom, / 31.5 Side by Side(Half), Side by Side(Full) / 63 Frame Packing, Line Alternative Top & Bottom, 50 Side by Side(Half), Side by Side(Full) 62.5 Frame Packing, Line Alternative Top & Bottom, / / 60 Side by Side(Half), Side by Side(Full) / / 60 Frame Packing, Line Alternative Top & Bottom, / / 60 Side by Side(Half), Side by Side(Full) / / / / / / / / / / / 60 Frame Packing, Field Alternative Top & Bottom, Side by Side(Half), Side by Side(Full) Frame Packing, Line Alternative Top & Bottom, Side by Side(Half) USB 1080p Side by Side(Half), Top & Bottom, DLNA 1080p Checker Board, MPO(Photo), JPS(Photo) Signal Playable 3D video format DTV Frame Compatible Side by Side(Half), Top & Bottom

48 48 SPECIFICATIONS 3D supported mode manually Input Resolution Signal Horizontal Frequency (khz) Verticla Frequency (Hz) DTV HD / SD - - ATV(CVBS/SCART) SD - - Component HD / SD - - HDMI-PC HDMI-DTV USB,DLNA (Movie) USB, DLNA (Photo) Miracast/Widi 1024X X X Others - - Playable 3D video format 2D to 3D, Side by Side(Half), Top & Bottom 2D to 3D, Side by Side(Half), Top & Bottom, Checker Board, Frame Sequential, Row Interleaving, Column Interleaving 2D to 3D, Side by Side(Half), Top & Bottom 480P D to 3D, Side by Side(Half), 576P Top & Bottom, Checker Board, Frame Sequential, Row Interleaving, Column 720p Interleaving 1080i 1080p Under 704x480 Over 704x480 interlaced Over 704x480 progressive Over 704x480 progressive Under 320x D to 3D, Side by Sied(Half), Top & Bottom D to 3D, Side by Side(Half), Top & Bottom,Checker Board, Row Interleaving, Column Interleaving D to 3D, Side by Side(Half), Top & Bottom, Checker Board, Frame Sequential, Row Interleaving, Column Interleaving - - 2D to 3D / 60 - others Over 320x X768p - 30 / x720p - 30 / X1080p - 30 / 60 2D to 3D, Side by Side(Half), Top & Bottom 2D to 3D, Side by Side(Half), Top & Bottom,Checker Board, Row Interleaving, Column Interleaving, Frame Sequential 2D to 3D, Side by Side(Half), Top & Bottom,Checker Board, Row Interleaving, Column Interleaving - - 2D to 3D 2D to 3D, Side by Side(Half), Top & Bottom 2D to 3D, Side by Side(Half), Top & Bottom Others - - 2D to 3D

49 Make sure to read the Safety Precautions before using the product. Keep the Owner s Manual (CD) in an accessible place for future reference. The model and serial number of the TV is located on the back and one side of the TV. Record it below should you ever need service. MODEL SERIAL To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon request to [email protected]. This offer is valid for three (3) years from the date on which you purchased the product.