Lubrication Pumps Industry Standard in Lubrication Equipment for Outstanding Performance and Reliability

Transcription

1 Lubrication Pumps Industry Standard in Lubrication Equipment for Outstanding Performance and Reliability PROVEN QUALITY. LEADING TECHNOLOGY.

2 Fire-Ball : The Industry s Most Trusted Piston Pumps Unmatched Reliability and Durability For nearly 5 years, Graco s Fire-Ball pumps have been a mainstay in the lubrication marketplace for durability and long life. Designed for applications requiring continuous duty operation, Graco Fire-Ball pumps repeatedly outperform and outlast the competition. Install It and Forget About It! These pumps are built to last. With so many unique maintenancesaving features, Fire-Ball pumps reduce downtime and save you money. Whether you re pumping oil or grease for low, medium or high volume applications, trust Graco s Fire-Ball pumps to get the job done! Typical Users Fast lubes Car/truck dealerships Municipalities and transits Construction equipment and fleet maintenance shops Lube trucks Manufacturing plants General service shops Typical Fluids Lubricating grease Motor, synthetic, hydraulic and gear oils Automatic transmission fluid Undercoating Rustproofing Sound deadening Durable Thick cast aluminum air motor housing offers unmatched durability Fewer Repairs Few moving parts in the air motor assembly means less downtime and low repair cost Reduce Downtime Displacement rods have minimal wear due to a proprietary Graco manufacturing process Eliminating Icing Large air porting design provides efficient use of compressed air supply for continuous pump operation without icing Corrosion-Resistant Corrosion-resistant design utilizes liquid salt nitriding, nickel plating, stainless steel, aluminum and chrome on key components for longer life Extended Seal Life In-line pump design aligns the air motor piston and fluid piston rods to maximize seal life Throat packings have a u-cup design with a hardened steel displacement rod to minimize wear Non-metallic poppet valves offer positive sealing performance, even with contaminated dirty air environments for long life without repair 2

3 Invest in the Best and Save! Graco has the total package! Industry Leading, Worldwide Distribution Network Our knowledgeable network of distributors provides easy access to professionals who understand your business and recommend the equipment that best fits your application. Total Customer Support Leading the industry with total customer support, the Graco Lubrication Equipment Division offers you a dedicated Customer Support Team. PUMPS METERS Innovative Product Solutions Graco offers a wide variety of products that support your business, including quality pumps, meters and hose reels. REELS 3

4 NXT Technology Move Large Amounts of Oil and Grease Fast Dispenses up to 117 liter (31 gallons) of oil or 26 kg (57 pounds) of grease a minute Tested to outperform and outlast all other pumps on the market with its long-life packing design Intuitive, easy-to-use controls Best value for the money fewer parts, faster repairs and long-lasting durability DataTrak Control NXT Air Motor Modular design for easier maintenance Rugged body armor won t rust or dent Highest technology air motor on the market Integrated Air Controls Lockable easy-turn regulator Front-mounted for easy access Compact and modular Built-in filtration NEW Xtreme Coupler Quick-disconnect coupler for easy maintenance Replaceable Outlet Fitting Reduces repair costs Runaway protection Pump diagnostics Material tracking Modular Air Valve De-icing controls Up to 5% quieter than previous models Modular air valve - Eliminates stalling - Easy-to-repair NEW Cartridge Throat Packings Allows for easy servicing without removing from ram Cast Outlet and Inlet Housing Improves structural integrity Markets/ Applications In-Plant Supply long-pipe runs or large volume header systems with multiple dispense locations Fill remote reservoirs or feed an automated lubrication system Transfer and dispense large amounts of lubricant to supply a production process Mines/Construction Rapid fill of lube trucks Service off-road equipment needing high volume transfers of oil or transmission fluids Feed lubricant to a mine or construction process Piston Valve with Floating Piston Seal For maximum pressure balance over a range of material viscosities Replaceable Seat Minimizes service costs What s NXT? Innovation that boosts your productivity. Hard Part Coatings Standard Severe Duty coating on rods and cylinder maximizes wear life Floating Priming Plate Provides uniform flow Graco NXT. It s what s next. Fleets (municipal, military, aviation) Rapid transfer or dispense of lubricants to service fleet equipment Supply large volume header systems with multiple dispense locations 4

5 DataTrak...More Control Than Ever Before Advanced Graco Control Architecture The Rules Have Changed Provides pump runaway protection by monitoring pump speed. DataTrak automatically shuts the pump off when material runs out or if a hose breaks. Tracks and displays material usage and volumetric flow, and tells you how much material is left in the drum. With an accurate, unbiased measurement of flow, DataTrak helps ensure quality control and eliminates material waste. Provides pump diagnostics for better maintenance. DataTrak tracks material throughput, which indicates when it s time for routine maintenance. It also provides pump lower diagnostics and lets you know whether the pump is diving in the up or down stroke a good indication that packings or balls are starting to wear, or the pump needs to be cleaned. Modular No Special Tools Required Graco air motors are designed with modular components so that no special tools are needed for assembly and repair NOISE LEVEL dba LOUDER 13 db(a) 1 db(a) 87 db(a) AVERAGE COMPARABLE MOTORS KING NXT 65 Low-Noise * All pressures 7 bar (.7 MPa, 1 psi) Quiet Operation The quiet, low-noise NXT Air Motor operates around 87 decibels, while other comparable motors operate up to 13 db(a). ICING PERFORMANCE Better RIQ King & Bulldog Quiet & Standard Senator Standard Bulldog Quiet Bulldog Quiet King Standard King Worse Remote Control for Maximum Convenience Integrated ram and pump control is easy to use and easy to see Intuitive electronic user interface gives the operator immediate and important operating data at the touch of a button De-Icing NXT 65, NXT 34, NXT 22 Low Noise & De-Icing NXT 65, NXT 34 & NXT 22 with air bleed Low Noise NXT 65, NXT 34 Low Noise NXT 22 Reduced Icing Keeps You Pumping Frost or ice can freeze-up the pump when you re moving large volumes of oil or grease. Graco s all new de-icing technology adds warmer ambient air to the air motor to melt any build-up. 5

6 Oil Pumps Quick Reference Air-Powered Oil Pumps and Packages Manuals: Fast-Ball 3796 Fire-Ball Cycles per liter (gallon) Fluid Flow l/min 8 cpm Fast-Ball, 1:1* 45.5 (1) 19 (5) Maximum Fluid Pressure bar (psi) 12.5 (18) Line Length : Up to 3.5 m (1 ft) Annual Usage: Up to 19, l (5, gal) Mini Fire-Ball 225, 3: (43.5) 7. (1.84) 37 (54) Air Motor Effective Diameter mm (in) 35.6 (1.4) 57.2 (2.25) Air Operating Range bar (psi) (4-18) Approx. Air Use and 7 bar (1 psi) and 8 cpm 5 scfm Wetted Materials CS, Polyurethane Air Inlet Port Size 1/4 in Dispense Points: 1 (not recommended with hose reel) Typical Applications: Continuous duty, maintenance facility dispensing motor oil, automatic transmission fluid, hydraulic fluid (4-18).241 m l/min ( gpm) Steel, Buna-N, Polyurethane, Aluminum, Rulon 3/8 in Fluid Inlet Port Size 1-1/2 in 1-1/2 in Fluid Outlet Port Size 3/4 in 1/2 in Line Length : Up to 76.2 m (25 ft) Dispense Points: 1 to 2 Annual Usage: Up to 24,62 l (6,5 gal) Typical Applications: Continuous duty, maintenance facility dispensing motor oil, gear oil, automatic transmission fluid, hydraulic fluid Fire-Ball 3, 5:1 8.6 (28.4) 9.3 (2.8) 62 (9) 76.2 (3) (4-18).765 m l/min (27 3 gpm) Steel, Polyurethane, Aluminum, Buna-N 3/8 1-1/2 1/2 Line Length : Up to m (5 ft) Dispense Points: 1 to 3 Annual Usage: Up to 114, l (3, gal) Typical Applications: Continuous duty, maintenance facility dispensing motor oil, gear oil, automatic transmission fluid, hydraulic fluid Fire-Ball 425, 3:1 1.6 (6) 5.6 (13.4) 37 (54) 17.9 (4.25) (4-18) 1.64 m l/min ( gpm) Steel, Polyurethane, Aluminum, Nitrile 1/2 in 1-1/2 in 3/4 in Line Length : Up to 76.2 m (25 ft) Dispense Points: 3 to 4 Annual Usage: Over 114, l (3, gal) Typical Applications: High flow, low pressure maintenance facility dispensing motor oil, gear oil, automatic transmission fluid, hydraulic fluid Fire-Ball 425, 6:1 3.2 (12) 6.6 (25.3 liters) 76 (11) 17.9 (4.25) (4-18).334 m l/min ( gpm) Steel, Polyurethane, Aluminum, Nitrile 1/2 in 1-1/2 in 3/4 in Line Length : Up to m (5 ft) Dispense Points: 3 to 4 Annual Usage: Over 114, l (3, gal) Typical Applications: High flow, medium pressure, maintenance facility dispensing motor oil, gear oil, automatic transmission fluid, hydraulic fluid Fire-Ball 425, 1:1 5.2 (19.6) 4.1 (15.4 liters) 124 (18) 17.9 (4.25) (4-18).555 m l/min ( gpm) Steel, Polyurethane, Aluminum, Nitrile 1/2 in 1-1/2 in 3/4 in Line Length : Up to m (75 ft) Dispense Points: 3 to 4 Annual Usage: Over 114, l (3, gal) Typical Applications: Long distance, maintenance facility dispensing motor oil, gear oil, automatic transmission fluid, hydraulic fluid Consult your local authorized Graco representative for line or pipe sizing 6

7 Oil Pumps Quick Reference See NXT Ordering Information for Instruction Manuals Dura-Flo, 6:1 Line Length : Up to m (5 ft) Annual Usage: Over 114, l (3, gal) Dura-Flo, 1:1 Line Length : Up to m (75 ft) Annual Usage: Over 114, l (3, gal) Output Per Cycle Output at 6 CPM* l/min. (gpm) Maximum Fluid Pressure bar (psi) Motor Size Maximum Air Input Pressure bar (psi) 1 cc 65.9 (17.4) 42.7 (62) NXT (1) Dispense Points: 3 to 4 (simultaneous) Typical Applications: High pressure, high volume for motor oil, gear oil, automatic transmission fluid and hydraulic fluid 1 cc 65.9 (17.4) 81.3 (118) NXT (1) Dispense Points: 3 to 4 (simultaneous) Typical Applications: High pressure, high volume for motor oil, gear oil, automatic transmission fluid and hydraulic Fluid Dura-Flo, 12:1 Carbon Steel or Dura-Flo, 12:1 Stainless Steel Air-Powered Oil Pumps and Packages 58 cc 34.8 (9.2) 82.1 (119) NXT (1) Line Length : Up to 34.8 m (1 ft) Annual Usage: Over 114, l (3, gal) Dura-Flo, 23:1 Dispense Points: 2 to 3 (simultaneous) Typical Applications: High pressure, high volume for motor oil, gear oil, automatic transmission fluid and hydraulic fluid 58 cc 34.8 (9.2) (1725) NXT (75) Line Length : Up to 34.8 m (1 ft) Dispense Points: 2 to 3 Annual Usage: Over 114, l (3, gal) Typical Applications: High pressure, high volume for motor oil, gear oil, automatic transmission fluid and hydraulic fluid High-Flo, 3.5:1 2 cc (31.5) 24.1 (35) NXT (1) Line Length : Up to 76.2 m (25 ft) Dispense Points: 4 to 5 Annual Usage: Over 114, l (3, gal) Typical Applications: High volume transfer for motor oil, gear oil, automatic transmission fluid and hydraulic fluid High-Flo, 4.5:1 15 cc 87.8 (23.2) 31 (45) NXT (1) Line Length : Up to m (45 ft) Dispense Points: 4 to 5 Annual Usage: Over 114, l (3, gal) Typical Applications: High volume transfer for motor oil, gear oil, automatic transmission fluid and hydraulic fluid High-Flo, 6:1 2 cc (31.5) 34 (5) NXT (75) Line Length : Up to m (5 ft) Dispense Points: 4 to 5 Annual Usage: Over 114, l (3, gal) Typical Applications: High volume transfer for motor oil, gear oil, automatic transmission fluid and hydraulic fluid *Graco recommends 2 cpm or less for supply applications Consult your local authorized Graco representative for line or pipe sizing 7

8 Oil Pumps Mini Fire-Ball 225, Fire-Ball 3 and Fire-Ball 425 Air-Powered Oil Pumps and Packages Features and Benefits Non-corrosive air motor design for long life (metal parts made of stainless steel, aluminum and chrome) No metal-to-metal contact means longer pump life and ensures pump will withstand harsh environments Double-acting pump provides reliable fluid flow Few moving parts translates into low maintenance and low cost of ownership Open exhaust port provides continuous operation without icing Typical Applications Medium to low volume and pressure lubricant transfer Automotive dealerships Heavy-duty dealerships Fast lube centers and service shops Fleet service facilities In-plant Lube trucks Mining Typical Fluids Handled Petroleum-and synthetic-based oils Mini Fire-Ball 225, 3:1 Performance Chart FLUID OUTLET PRESSURE psi (bar) 5 (31.4) 4 (21) 3 (1.4) 2 (5.2) 1 (5.2) cycles/min scfm (m3/min) (.3) gpm (lpm) (3.8) (7.6) (11.4) (15) TEST FLUID: No. 1 Weight Oil 32 (.23) 24 (.23) 16 (.17) 8 (.12) AIR CONSUMPTION Inlet Air Pressures: = 1 psi (6.9 bar) = 7 psi (4.8 bar) = 4 psi (2.8 bar) Fire-Ball 3, 5:1 Performance Chart Fire-Ball 425, 3:1 Performance Chart FLUID OUTLET PRESSURE psi (bar) 45 (31.4) 3 (21) 15 (1.4) 75 (5.2) cycles/min scfm (m3/min) 17 1 (.3) 8 (.23) 6 (.17) 4 (.12) 2 gpm (.8) (lpm) (3.8) (7.6) (11) (15) TEST FLUID: No. 1 Weight Oil AIR CONSUMPTION Inlet Air Pressures: =1 psi (6.9 bar) =7 psi (4.8 bar) =4 psi (2.8 bar) FLUID OUTLET PRESSURE psi (bar) 45 (55) 35 (41) 25 (27) 15 (13) cycles/min gpm (lpm) (7.5) (23) (38) (53) TEST FLUID: No. 1 Weight Oil scfm (m3/min) 6 (1.7) 45 (1.2) 3 (.9) 15 (.4) AIR CONSUMPTION Inlet Air Pressures: =1 psi (6.9 bar) =7 psi (4.8 bar) =4 psi (2.8 bar) Fire-Ball 425, 6:1 Performance Chart Fire-Ball 425, 1:1 Performance Chart FLUID OUTLET PRESSURE psi (bar) 8 (55) 6 (41) 4 (27) 2 (13) cycles/min scfm (m3/min) 15 8 (2.2) 6 (1.7) 4 (1.1) 2 (.6) gpm (lpm) (7.6) (15.4) (22.7) (3.3) TEST FLUID: No. 1 Weight Oil AIR CONSUMPTION Inlet Air Pressures: = 1 psi (6.9 bar) = 7 psi (4.8 bar) = 4 psi (2.8 bar) FLUID OUTLET PRESSURE psi (bar) 18 2 (125) 14 (96) 1 (7) 6 (42) cycles/min scfm (m3/min) 1 8 (2.2) 2 (14) gpm (lpm) (3.8) (7.6) (11.4) (15) (19) TEST FLUID: No. 1 Weight Oil 6 (1.7) 4 (1.1) 2 (.6) AIR CONSUMPTION Inlet Air Pressures: = 1 psi (6.9 bar) = 7 psi (4.8 bar) = 4 psi (2.8 bar) 8

9 Oil Pumps Mini Fire-Ball 225, Fire-Ball 3 and Fire-Ball 425 Mini Fire-Ball 225, 3:1 and Fire-Ball 3, 5:1 Packages Portable Cover-Mounted Cover-Mounted Bung-Mounted Bung-Mounted Universal Container Size 6 l (16 gal) 6 l (16 gal) 2 l (55 gal) 2 l (55 gal) 14 l (275 gal) Universal 225, 3:1 Package * 24697* 24823* 225, 3:1 Pump Only , 5:1 Package * * 3, 5:1 Pump Only Dispense/Hose Fitting Kit Fluid Hose 1.8 m x 12.7 mm (6 ft x 1/2 in) Air Hose 1.8 m x 12.7 mm (6 ft x 1/2 in) 1.8 m x 9.5 mm (6 ft x 3/8 in) 1.8 m x 12.7 mm (6 ft x 1/2 in) 1.8 m x 9.5 mm (6 ft x 3/8 in) 1.8 m x 12.7 mm (6 ft x 1/2 in) 1.8 m x 9.5 mm (6 ft x 3/8 in) 1.8 m x 12.7 mm (6 ft x 1/2 in) 1.8 m x 9.5 mm (6 ft x 3/8 in).5 m x 12.7 mm (1.5 ft x 1/2 in).5 m x 9.5 mm (1.5 ft x 3/8 in) Cover Air Regulator Caster Base Bung Adapter , 3:1 Instruction Manual , 5:1 Instruction Manual * Use 9.5 mm (3/8 in) air regulator 1975 as required; must be ordered separately Order low-level cut-off separately for metered dispense systems Air-Powered Oil Pumps and Packages Fire-Ball 425, 3:1, 6:1 and 1:1 Packages Cover-Mounted Bung-Mounted Universal Supply Wall Mount Container Size 2 l (55 gal) 2 l (55 gal) Universal Universal 3:1 Package :1 Pump only :1 Package :1 Pump only :1 Package * * * :1 Pump Only Hose/Fitting Kit Fluid Hose Air Hose 1.8 m x 19.5 mm (6 ft x 3/4 in) 1.8 m x 12.7 mm (6 ft x 1/2 in) 1.8 m x 19.5 mm (6 ft x 3/4 in)) 1.8 m x 12.7 mm (6 ft x 1/2 in).5 m x 19.5 mm (1.5 ft x 3/4 in).5 m x 19.5 mm (1.5 ft x 3/4 in).5 m x 19.5 mm (1.5 ft x 3/4 in).5 m x 12.7 mm (1.5 ft x 1/2 in) Cover 2326 Filter Regulator Air Shutoff Valve Fluid Shutoff Valve Wall Mount Bracket Instruction Manual * Use 12.7 mm (1/2 in) air regulator/gauge as required; must be ordered separately Order low-level cut-off separately for metered dispense systems Wall mount universal container for 1:1 only; no container for 3:1, 6:1 Portable Mini Fire-Ball 225 3:1 (24693) shown Cover mount Mini Fire-Ball 225 3:1 (24696) shown Bung mount Mini Fire-Ball 225 3:1 (24823) shown 9

10 Oil Pumps NXT High-Flo Air-Powered Oil Pumps and Packages Features and Benefits Move large amounts of oil fast dispenses up to 119,2 liter (31.5 gallons) of oil per minute Tested to outperform and outlast all other pumps on the market with its long-life packing design Models available with intuitive, easy-to-use DataTrak controls gives you pump diagnostics, material usage tracking and pump runaway protection Reduces icing and noise new NXT air motor is up to 5% quieter than previous models Typical Applications In-plant to supply long-pipe runs or large volume header systems with multiple dispense locations Fill remote reservoirs or feed an automated lubrication system Transfer and dispense large amounts of lubricant to supply a production process Mines/construction for rapid refill of lube trucks and to service off-road equipment Package Number with DataTrak Package Number without DataTrak 24D62 24D63 24D66 24D67 Ratio 3.5:1 4.5:1 6:1 6:1 Mounting Wall (255143) Wall (255143) Wall (255143) Stand (218742) Pump with DataTrak and thermal relief kit 24D59 24D591 24D594 24D594 Pump w/o DataTrak and thermal relief kit 24D596 24D597 24D6 24D6 Output per Cycle 2cc 15 cc 2 cc 2 cc Output at 6 CPM* l/min. (31.5 gpm) 87.8 lpm (23.2 gpm) l/min. (31.5 gpm) l/min. (31.5 gpm) Motor Size NXT 34 NXT 34 NXT 65 NXT 65 Maximum Fluid Pressure 24.1 bar (35 psi) 31. bar (45 psi) 35.2 bar (5 psi) 35.2 bar (5 psi) Maximum Air Input Pressure 6.9 bar (1 psi) 6.9 bar (1 psi) 5.2 bar (75 psi) 5.2 bar (75 psi) System Manual Pump Manual Pump Lower Manual Motor Manual Pump Inlet Size 1 1/2 in npt (f) 1 1/2 in npt (f) 2 in npt (f) 2 in npt (f) Pump Outlet Size 1 in npt (f) 1 in npt (f) 2 in npt (f) 2 in npt (f) 3/4 in x 1.2 m (4 ft) Air Hose in x 1.8 m (6 ft) Fluid Hose *Graco recommends 2 CPM or less for supply applications Pump Specifications Manuals Inlet/ Outlet Hoses Performance Charts Test Fluid is No. 1 Weight Oil for all pumps A = 7. bar (1 psi) air pressure B = 4.9 bar (7 psi) air pressure C = 2.8 bar (4 psi) air pressure A = 7. bar (1 psi) air pressure B = 4.9 bar (7 psi) air pressure C = 2.8 bar (4 psi) air pressure A = 4.9 bar (7 psi) air pressure B = 3.7 bar (55 psi) air pressure C = 2.8 bar (4 psi) air pressure 1

11 Oil Pumps NXT Dura-Flo Performance Charts A = 7 bar (1 psi) air pressure or 15 bar (15 psi) hydraulic oil pressure B = 4.9 bar (7 psi) air pressure or 75 bar (15 psi) hydraulic oil pressure C = 2.8 bar (4 psi) air pressure or 42 bar (6 psi) hydraulic oil pressure Test Fluid is No. 1 Weight Oil for all pumps Air-Powered Oil Pumps and Packages Package Number with DataTrak Package Number without DataTrak 24D64 24D68 24D65 Pump Specifications Manuals Inlet/ Outlet Ratio 6:1 1:1 12:1 23:1 Mounting Wall ( ) Wall ( ) Wall ( ) Wall ( ) Pump with DataTrak and thermal relief kit 24D592 24D595 24D593 Pump w/o DataTrak and thermal relief kit 24D598 24D61 24D599 Output per Cycle 1cc 1cc 58cc 58cc Output at 6 CPM* 65.9 l/min. (17.4 gpm) 65.9 l/min. (17.4 gpm) 34.8 l/min. (9.2 gpm) 34.8 l/min. (9.2 gpm) Motor Size NXT 34 NXT 65 NXT 34 NXT 65 Max. Fluid Pressure 4.3 bar (62 psi) 81.3 bar (118 psi) 82.1 bar (119 psi) bar (1725 psi) Max. Air Input Pressure 6.9 bar (1 psi) 6.9 bar (1 psi) 6.9 bar (1 psi) 5.2 bar (75 psi) System Manual Pump Manual Pump Lower Manual Motor Manual Pump Inlet Size 2 in 2 in 2 in 2 in Pump Outlet Size 1 1/2 in npt(m) 1 1/2 in npt(m) 1 1/2 in npt(m) 1 1/2 in npt(m) Hoses 3/4 in x 1.2m (4 ft) Air Hose in x 1.8m (6 ft) Fluid Hose *Graco recommends 2 CPM or less for supply applications 11

12 Grease Pumps Quick Reference Manual Number Continuous-Duty Flow Rate kg/min. (lb/min.) Maximum Fluid Pressure bar (psi) Air Motor Effective Diameter mm (in) Operating Range bar (psi) Approximate Air Use Wetted Materials Air Inlet Port Size Material Inlet Material Outlet Mini Fire-Ball 225, 5:1.15 (.32) 578 (84) 57.2 (2.25) 3-1 (4-14).2 m 3 /min (7.3 scfm) Steel, Urethane, kg/min (.41 lb/min.) Buna-N, 7 bar (1 8 cpm Ethylene, Delrin 3/8 in Slotted 1/4 in Line Length : Up to 3.5 m (1 ft) Dispense Points: 1 Annual Usage: Up to 2,268 kg (5, lb) Typical Applications: Small maintenance facility Fire-Ball 3, 5:1.54 (1.19) 58 (84) 76.2 (3) (3-14).645 m 3 /min ( bar (1 psi) CS, Delrin, Buna-N, Polyurethane 3/8 in Slotted 1/4 in Air-Powered Grease Pumps and Packages /36982 Line Length : Up to 76.2 m (25 ft) Dispense Points: 1 to 2 Annual Usage: Up to 4,535 kg (1, lb) Typical Applications: High pressure grease to 579 bar (84 psi) Fire-Ball 425, 5:1 1.5 (3.35) 517 (75) 18 (4.25) (4-15) Line Length : Up to 76.2 m (25 ft) Annual Usage: 9,72 kg (2, lb) or more Fire-Ball 425, 75:1.88 (1.95) 517 (75) 18 (4.25) (4-1).54m 3 /min ( bar (7 psi) CS, Leather 1/2 in Dispense Points: 4 or more Typical Applications: High pressure grease to 517 bar (75 psi).736 m 3 /min (26 7 bar (1 psi) CS, Leather 1/2 in Slotted Slotted 3/8 in 3/8 in 38777/36982 Line Length : Up to m (5 ft) Annual Usage: 6,84 kg (15, lb) or more Dispense Points: 4 or more Typical Applications: High pressure grease to 517 bar (75 psi) Fire-Ball 3, 15: l/min (.7 gpm) 186 (27) 76 (3) (4-18).48 m 3 /min (17 7 bar (1 psi) CS, AL, Leather, PTFE, Rubber 3/8 in 1 in Straight Inlet 1/4 in Line Length : Up to 76.2 m (25 ft) Dispense Points: 1 to 2 Annual Usage: Up to 4,535 kg (1, lb) Medium Pressure Grease to 186 bar (27 psi) Fire-Ball 425, 1: l/min (3.5 gpm) 124 (18) 18 (4.25) (4-18).37 m 3 /min (13 7 bar (1 psi) Steel, Bass, Aluminum, Leather, Buna-N 1/2 in Slotted 1 in 3947 Line Length : Up to m (5 ft) Dispense Points: 4 or more Annual Usage: 9,72 kg (2, lb) or more Typical Applications: High pressure grease to 124 bar (18 psi) * Not recommended with hose reel Consult your local authorized Graco representative for line or pipe sizing 12

13 Grease Pumps Quick Reference See NXT Ordering Information for Instruction Manuals Output Per Cycle Output at 6 CPM* l/min. (gpm) Maximum Fluid Pressure bar (psi) Motor Size Maximum Air Input Pressure bar (psi) Check-Mate, 14:1** 5cc 26. (57.) 96.5 (14) NXT (1) Line Length : Up to 3.5 m (1 ft) Dispense Points: 1 Annual Usage: Up to 9,72 kg (2, lb.) Typical Applications: Small maintenance facility Check-Mate, 26:1 5cc 26. (57.) (26) NXT (1) Line Length : Up to 76.2 m (25 ft) Annual Usage: Up to 9,72 kg (2, lb.) Dispense Points: 1 to 2 (simultaneous) Typical Applications: Smaller continuous duty, maintenance facility Floor-mounted Check-Mate, 29:1 Line Length : Up to 76.2 m (25 ft) Annual Usage: Up to 9,72 kg (2, lb.) Check-Mate, 55:1 Line Length : Up to 76.2 m (25 ft) Annual Usage: Up to 9,72 kg (2, lb.) Check-Mate, 63:1** 25cc 25cc 13. (28.) 2. (29) NXT (1) Dispense Points: 4 or more Typical Applications: Medium continuous duty, maintenance facility 13. (28.) (55) NXT (75) Dispense Points: 1 to 2 (simultaneous) Typical Applications: Smaller continuous duty, maintenance facility Air-Powered Grease Pumps and Packages 1cc 5.2 (11.4) 31.3 (45) NXT (72) Line Length : Up to 76.2 m (25 ft) Annual Usage: Up to 9,72 kg (2, lb.) Dispense Points: 1 to 2 (simultaneous) Typical Applications: Smaller continuous duty, maintenance facility Check-Mate, 68:1** 2cc 1.4 (22.8) (53) NXT (78) Line Length : Up to m (5 ft) Annual Usage: Up to 9,72 kg (2, lb.) Dispense Points: 1 to 2 (simultaneous) Typical Application: Smaller continuous duty, maintenance facility * Graco recommends 2 CPM or less for supply applications. **NXT Check-Mate pump is available in floor stand or RAM Package. See NXT package section of this book for more information. RAM-mount 13

14 Grease Pumps Mini Fire-Ball 225, 5:1 Air-Powered Grease Pumps and Packages Features and Benefits Non-corrosive air motor design for long life Double-acting pump ensures fluid flow Robust grease inlet cage withstands the most abusive handling Typical Applications Medium to high pressure, low to medium volume grease dispense Automotive dealerships Heavy-duty dealerships Fast lube and service centers Fleet service facilities Mining In-plant Typical Fluids Handled Grease up to NLGI #2 Fire-Ball 3, 5:1 Performance Chart FLUID OUTLET PRESSURE psi (bar) 8 (552) 6 (414) 4 (276) 2 (138) cycles/min lb/min (kg/min) (.5) (.9) (1.4) (1.8) TEST FLUID: NLG1 #1 Grease at 7 F (21 C) scfm (m3/min) 4 (1.13) 3 (.85) 2 (.57) 1 (.28) AIR CONSUMPTION Inlet Air Pressures: =15 psi (1.3 bar) =1 psi (6.9 bar) =7 psi (4.8 bar) =4 psi (2.8 bar) Mini Fire-Ball 225, 5:1 Performance Chart FLUID OUTLET PRESSURE FLUID OUTLET PRESSURE psi (bar) 8 (552) 6 (414) 4 (276) 2 (138) cycles/min lb/min (kg/min) (.8) (.15) (.22) TEST FLUID: No. 1 Weight Oil psi (bar) 12 (83) 9 (62) 6 (41) 3 (21) cycles/min scfm (m 3 /min) 14 (.4) 1.5 (.3) 7 (.2) 4 (.1) Fire-Ball 3, 15:1 Performance Chart FLUID OUTLET PRESSURE scfm (m3/min) 12 (.34) 9 (.26) 6 (.17) 3 gpm (.8) (lpm) (.95) (1.7) (2.9) (3.8) TEST FLUID: No. 1 Weight Oil Fire-Ball 425, 1:1 Performance psi (bar) 75 (51) 6 (48) 45 (36) 3 (24) cycles/min scfm (m3/min) 4 (1.1) 3 (.85) 2 (.56) 1 lb/min (.28) (kg/min) (.45) (.9) (1.4) (1.8) TEST FLUID: No. 1 Weight Oil 53 AIR CONSUMPTION AIR CONSUMPTION AIR CONSUMPTION Inlet Air Pressures: =14 psi (9.6 bar) =1 psi (6.9 bar) =8 psi (5.5 bar) =4 psi (2.8 bar) Inlet Air Pressures: =1 psi (6.9 bar) =7 psi (4.8 bar) =4 psi (2.8 bar) Inlet Air Pressures: =1 psi (6.9 bar) =7 psi (4.8 bar) Fire-Ball 425, 5:1 Performance FLUID OUTLET PRESSURE psi (bar) 75 (51) 6 (48) 45 (36) 3 (24) cycles/min scfm (m3/min) 4 (1.1) 3 (.85) 2 (.56) 1 lb/min (.28) (kg/min) (.45) (.9) (1.4) (1.8) TEST FLUID: No. 1 Weight Oil 53 AIR CONSUMPTION Inlet Air Pressures: =15 psi (6.9 bar) =1 psi (4.8 bar) Fire-Ball 425, 75:1 Performance Chart FLUID OUTLET PRESSURE psi (bar) 75 (51) 6 (48) 45 (36) 3 (24) cycles/min scfm (m3/min) 4 (1.1) 3 (.85) 2 (.56) 1 lb/min (.28) (kg/min) (.45) (.9) (1.4) (1.8) TEST FLUID: No. 1 Weight Oil AIR CONSUMPTION Inlet Air Pressures: =1 psi (6.9 bar) =7 psi (4.8 bar) 14

15 Grease Packages Fire-Ball Mini Fire-Ball 225, 5:1 Packages Container Size Fire-Ball 3, 15:1, 5:1 Packages Portable Pail Dispenser Stationary Pail Dispenser Container Size 16 kg (35 lb) 16 kg (35 lb) Stationary Pail Dispenser 16 kg (35 lb) or 32 kg (7 lb) Cart-Mounted Pail Dispenser 16 kg (35 lb) or 32 kg (7 lb) Cart-Mounted Pail Topper Stationary Drum Dispenser Cover-Mounted Drum Dispenser 16 kg (35 lb) 55 kg (12 lb) 18 kg (4 lb) 15:1 Package :1 Pump Only :1 Package 22269* * * 22612* 5:1 Pump Only :1 Metered Package Dispense Kit Fluid Hose Portable Pail Dispenser 16 kg (35 lb) 3.7 m x 6.4 mm (12 ft x 1/4 in) Stationary Pail Dispenser 16 kg (35 lb) or 32 kg (7 lb) 4.6 m x 9.5 mm (15 ft x 3/8 in) Cart-Mounted Pail Dispenser 16 kg (35 lb) or 32 kg (7 lb) 3.7 m x 6.4 mm (12 ft x 1/4 in) Stationary Supply 3.7 m x 6.4 mm (12 ft x 1/4 in) Stationary Supply 3.7 m x 6.4 mm (12 ft x 1/4 in) Portable w/ Caster Base 7.6 m x 9.5 mm (25 ft x 3/8 in) Portable w/ 2-Wheel Cart 55 kg (12 lb) 18 kg (4 lb) 55 kg (12 lb) 55 kg (12 lb) Package 24691* * * * * * * Pump Only Dispense Kit Fluid Hose 3.7 m x 6.4 mm (12 ft x 1/4 in) 3.7 m x 6.4 mm (12 ft x 1/4 in) 3.7 m x 6.4 mm (12 ft x 1/4 in) Air Hose 1.8 m x 6.4 mm (6 ft x 1/4 in) 1.8 m x 9.5 mm (6 ft x 3/8 in) 1.8 m x 6.4 mm (6 ft x 1/4 in) 1.8 m x 9.5 mm (6 ft x 3/8 in) 3.7 m x 6.4 mm (12 ft x 1/4 in) 3.7 m x 6.4 mm (12 ft x 1/4 in) Follower Plate Cover Base/Cart Container Instuction Manual * Order 9.5 mm (3/8 in) air regulator 1975 separately Order follower plate separately for 16 kg (35 lb) pails or for 32 kg (7 lb) bulk 16 kg (35 lb): pail; 32 kg (7 lb): bulk 7.6 m x 9.5 mm (25 ft x 3/8 in) Follower Plate Inductor Plate Cover Cart Container Holster Elevator Instruction Manual * Use 9.5 mm (3/8 in) air regulator 1975; must be ordered separately Order follower plate for 16 kg (35 lb) containers, and follower plate for 32 kg (7 lb) containers; must be ordered separately Metered grease package includes Accu-Shot instead of Pro-Shot Air-Powered Grease Pumps and Packages 15

16 Grease Packages Fire-Ball Air-Powered Grease Pumps and Packages Fire-Ball 3 Packages for kg (35-7 lb) Containers Packages Container Size Fire-Ball 3 Packages for 55 kg (12 lb) Containers Packages Portable w/caster Base Portable w/ 2-Wheel Cart Portable w/ Heavy-Duty Cart Stationary Supply Stationary Supply Topper-Inductor Container Size kg (lb) 55 (12) Package No. 2256* 22526* * 22514* 22273* Metered Package Pump No Dispense Kits Fluid Hose Portable Pail Dispenser 16 kg (35 lb) 3.7 m x 6.4 mm (12 ft x 1/4 in) Stationary Pail Dispenser 16 kg (35 lb) or 32 kg (7 lb) Cart-Mounted Pail Dispenser 16 kg (35 lb) or 32 kg (7 lb) 7.6 m x 6.4 mm (25 ft x 1/4 in) Cart-Mounted Pail Topper 16 kg (35 lb) Package No * * * 22612* Metered Package Pump No Dispense Kit 2227 Fluid Hose 3.7 m x 6.4 mm (12 ft x 1/4 in.) Follower Plate Cover Holster Container Cart 2365 Elevator Inductor Plate Instruction Manual * Use 9.5 mm (3/8 in.) air regulator 1975; must be ordered separately Order follower plate for 16 kg (35 lb) containers, and follower plate for 32 kg (7 lb) containers; must be ordered separately Metered grease package includes Accu-Shot instead of Pro-Shot 1.8 m x 6.4 mm (6 ft x 1/4 in) Air Hose 1.8 m x 9.5 mm (6 ft x 3/8 in) Follower Plate Cover Holster Caster Base Cart Elevator Pump Support Hold Down Kit Instruction Manual * Use 9.5 mm (3/8 in) air regulator 1975; must be ordered separately Pump support assembly includes dust cover, base, inductor plate and 1.8 m (6 ft) fluid & air hoses Metered grease package includes Accu-Shot instead of Pro-Shot Portable Fire-Ball 3 3:1 with Pro-Shot (22269) shown Accu-Shot (23387) Portable Fire-Ball 3 with 2-Wheel Cart (22526) shown 16

17 Grease Packages Fire-Ball Fire-Ball 3 Packages for 18 kg (4 lb) Containers Packages Stationary Topper-Inductor Container Size kg (lb) 18 (4) Package No * 22613* Pump No Hose & Fitting Kit Fluid Hose 1.8 m (6 ft) x 6.4 mm (1/4 in) Air Hose 1.8 m (6 ft) x 9.5 mm (3/8 in) Follower Plate Cover 2326 Carriage Elevator Inductor Plate Base Instruction Manual * Use 9.5 mm (3/8 in) air regulator 1975; must be ordered separately Fire-Ball 425, 5:1 for kg (12-4 lb) Containers Packages Stationary Supply Stationary Supply Stationary Supply Topper-Inductor Container Size kg (lb) 55 (12) 18 (4) Package No * * 22618* Pump No Hose Kit Fluid Hose 1.8 m x 9.5 mm (6 ft x 3/8 in) Air Hose 1.8 m x 12.7 mm (6 ft x 1/2 in) Cover Follower Plate Carriage Elevator Inductor Plate Base Ram Air Regulator Adapter Plate Adapter Kit Manual * Use 12.7 mm (1/2 in) air regulator/gauge ; must be ordered separately Ram Air-Powered Grease Pumps and Packages 17

18 Grease Packages Fire-Ball Air-Powered Grease Pumps and Packages Fire-Ball 425, 75:1 Packages Cover-Mount Cover-Mount Inductor Ram Pail 16 or 32 kg (35 or 7 lb) Bung or Cover Container Size - kg (lb) 55 (12) 18 (4) 18 (4) 18 (4) Pail Length 18 (4) Packge No * * * Pump No Hose & Fitting Kit Drum Cover Follower Plate Carriage Elevator Base Inductor Ram Air Regulator Adapter Plate Adapter Kit Manual * Use 12.7 mm (1/2 in) air regulator and gauge 196; must be ordered separately 16 kg (35 lb): 2653; 32 kg (7 lb): Fire-Ball 3, 5:1 and 425, 5:1, 75:1 Lube Truck Packages Packages Cover-Mounted Cover-Mount Cover-Mount Cover-Mount Container Size - kg (lb) 55 (12) 18 (4) 55 (12) 18 (4) 3, 5:1 Package , 5:1 Pump , 5:1 Package , 5:1 Pump , 75:1 Package , 75:1 Pump Hose & Fitting Kit Hose Length - m (ft) 1.8 (6) 1.8 (6) 1.8 (6) 1.8 (6) Drum Open-Head Open-Head Open-Head Open-Head Drum Cover Follower Plate Air Regulator * * Hold-Down Kit Manual * Use 9.5 mm (3/8 in) air regulator/gauge 1975; must be ordered separately Use 12.7 mm (1/2 in) air regulator/gauge 24484; must be ordered separately 18

19 Grease Packages Check-Mate See NXT Ordering Information for Instruction Manuals Output Per Cycle Output at 6 CPM* kg/min (lb/min) Maximum Fluid Pressure bar (psi) Motor Size Maximum Air Input Pressure bar (psi) Check-Mate, 14:1** 5cc 26. (57.) 96.5 (14) NXT (1) Line Length : Up to 3.5 m (1 ft) Dispense Points: 1 Annual Usage: Up to 9,72 kg (2, lb) Typical Applications: Small maintenance facility Check-Mate, 26:1 5cc 26. (57.) (26) NXT (1) Floor-mounted Line Length : Up to 76.2 m (25 ft) Annual Usage: Up to 9,72 kg (2, lb) Check-Mate, 29:1 Line Length : Up to 76.2 m (25 ft) Annual Usage: Up to 9,72 kg (2, lb) Check-Mate, 55:1 25cc 25cc Dispense Points: 1 to 2 (simultaneous) Typical Applications: Smaller continuous duty, maintenance facility 13. (28.) 29 (2. bar) NXT (1) Dispense Points: 4 or more Typical Applications: Medium continuous duty, maintenance facility 13. (28.) (55) NXT (1) Air-Powered Grease Pumps and Packages Line Length : Up to 76.2 m (25 ft) Annual Usage: Up to 9,72 kg (2, lb) Dispense Points: 1 to 2 (simultaneous) Typical Applications: Smaller continuous duty, maintenance facility Check-Mate, 63:1** 1cc 5.2 (11.4) 31.3 (45) NXT (72) Line Length : Up to 76.2 m (25 ft) Annual Usage: Up to 9,72 kg (2, lb) Dispense Points: 1 to 2 (simultaneous) Typical Applications: Smaller continuous duty, maintenance facility Check-Mate, 68:1** 2cc 1.4 (22.8) (53) NXT (78) Line Length : Up to m (5 ft) Annual Usage: Up to 9,72 kg (2, lb.) Dispense Points: 1 to 2 (simultaneous) Typical Application: Smaller continuous duty, maintenance facility RAM-mount * Graco recommends 2 CPM or less for supply applications. **NXT Check-Mate pump is available in floor stand or RAM Package. See NXT package section of this book for more information. 19

20 Grease Packages NXT Check-Mate Packages Ordering Information Package Number with DataTrak Package Number without DataTrak24E624E724E824E924E124E11 Ratio 14:1 26:1 29:1 55:1 63:1 68:1 Pump with DataTrak P14MCS P26MCS P29MCS P55MCS P63MCS P68MCS Pump w/o DataTrak P14DCS P26DCS P29DCS P55DCS P63DCS P68DCS Mounting Floor Stand (223952) Floor Stand (223952) Floor Stand (223952) Floor Stand (223952) Floor Stand (223952) Floor Stand (223952) 3/4 in x 1.8 m (6 ft) Air Hose in x 1.8 m (6 ft) Fluid Hose System Manual Pump Manual Pump Lower Manual Air-Powered Grease Pumps and Packages Motor Manual *Graco recommends 2 cpm or less for supply applications Performance Charts A = 7 bar (1 psi) B = 5. bar (7 psi) C = 2.8 bar (4 psi) D = 6.3 bar (9 psi) Test Fluid : #1 Weight Oil for all pumps Ordering Information NXT Check-Mate RAM Packages Ratio 14:1 63:1 68:1 Package Number with DataTrak Package Number without DataTrak 24E78 24E781 24E782 Mounting RAM System RAM System RAM System Operation Manual Repair and Parts Manual

21 Diaphragm Pumps Air-Operated Double Diaphragm Transfer Pumps D DB3525DF3525DK3525 Ordering Information and Technical Specifications Key OT = Oil Transfer OE = Oil Evacuation WA = Water, Anti-Freeze FD = Fuel Dispense (with 3.4 bar (5 psi) relief valve) FT = Fuel Transfer WWS = Windshield Wash Solution Body/Diaphragm Description 37 3/8 in Diaphragm Pump Acetal/TPE Part Number D31255 Typical Application OT, WA, WWS Max. Air SCFM Air Inlet NPT 7 (1) 1/4 Max. bar (psi) 7 (1) Fluid Inlet/ Outlet Free Flow gpm (lpm) Air Valve Replacement Kit Kits (Seats, Balls, Diaphragms) Diaphragm Kit Manual 3/8 7 (31.8)239952D3255D /4 in Diaphragm Pump Aluminum/Buna N OT, OE, WA, WWS 28 (1) 1/4 7 (1) 3/4 16 (6.6) D5277D /4 in Diaphragm Pump Acetal/Buna Dual Inlet /5 WWS, WA 28 (1) 1/4 7 (1) 3/4 16 (61)241657D5277D in Diaphragm Pumps 15A Aluminum/TPE (UL) OE, WA, FT (leaded fuel only) 67 1/2 7 (1) 1 5 (189) 24B766 24B634 and 24B639 24B A Aluminum/TPE (UL) FD 2 (2) 1/2 3.5 (5) 1 38 (144) 24B766 24B634 and 24B639 24B /2 in Diaphragm Pump Aluminum/TPE DB3525 OT, OE, WA 9 (3) 1/2 8.3 (12) 1 1/2 9 (341)236273DB525DB in Diaphragm Pump Aluminum/TPE DF3525 OT, OE, WA 175 (3) 1/2 8.3 (12) 2 15(567)236273DF525DF in Diaphragm Pump Aluminum/TPE NOTE: All pumps are 1:1 ratio Mounting Accessories DK3525 (1) Max air use at 7. bar (1 psi) OT, OE, WA 325 (3) 3/4 (2) Max air use at 3.4 bar (5 psi) 8.3 (12) (141) (3) Max air use at 12 psi (8. bar) DK525DK Pump / Air Line Filter Air Regulator & Gauge Air Quick-Connect Coupler 28536, 1/ , 1/ , 1/ , 1/ , 1/2 N/A Air Quick-Connect Nipple 16997, 1/4 npt(m) 16997, 1/4 npt(m) 11196, 1/ , 1/ , 1/2 N/A Bleed Type Air Valve Wall Bracket C637 N/A N/A N/A Thermal Relief Kit N/A N/A N/A Thermal Relief Valves 1.3 bar (15 psi) al/bn, ss/tf al/bn, ss/tf al/bn, ss/tf al/bn, ss/tf al/bn, ss/tf al/bn, ss/tf Grounding Wire and Clamp Suction Hose Kit N/A N/A N/A Flange Adapter Kit N/A N/A N/A N/A N/A N/A Dual Inlet Manifold N/A * ** N/A N/A N/A Instruction Manual & & * comes with dual inlet **Dual inlet must be ordered separately for Diaphragm Pumps and Accessories 21

22 Other Products available from Graco Electronic & Mechanical Meters & Dispense Valves LDM and LDP Meters Up to 19 l/min. (5 gpm) 69 bar (1, psi) Manual and pre-set dispense Dispenses motor oils, ATF, gear lube and anti-freeze Automatic nozzle only Indoor use Multiple extensions available SDM and SDP Meters Up to 53 l/min. (14 gpm) 13 bar (1,5 psi) Manual and pre-set dispense Dispenses motor oils, ATF, gear lube and anti-freeze High flow Indoor or outdoor use Multiple extensions available Matrix Meter Up to 53 l/min. (14 gpm) Dealerships, fleets, mining, and off-road, construction service Works with Matrix Total Fluid Management System to control and track inventories Up to 53 l/min. (14 gpm) Up to 3 presets SDV15 Control Valve Up to 57 l/min. (15 gpm) 13 bar (1,5 psi) Dispenses motor oils, ATF, gear lube and anti-freeze Sturdy cast body designed for use in tough environments Lock-on trigger Indoor or outdoor use Multiple extensions available XDV2 Control Valve Up to 76 l/min. (2 gpm) 13 bar (1,5 psi) Dispenses motor oils, ATF, gear lube and anti-freeze High flow valve Sturdy cast body designed for use in tough environments Twist-lock-on/off trigger Indoor or outdoor use Multiple extensions available SDI15 In-Line Meter Up to 53 l/min. (14 gpm) 13 bar (1,5 psi) Dispenses motor oils, ATF, and anti-freeze High flow electronic meter displays in pints, quarts, liters or gallons Indoor use Mechanical Meter Up to 15 l/min. (4 gpm) 69 bar (1, psi) Manual and pre-set dispense Dispenses a variety of petroleum and synthetic based oils and anti-freeze Indoor and outdoor use 22

23 Hose Reels LD Series Enclosed Simplle to install - mounts in minutes Enclosed reel for safety and protection-compact enclosure extends hose life Full flow swivel - maximizes fluid output while minimizing pressure loss Easily add or decrease spring tension while pressurized SD Composite Series Designed for small service garages and repair shops Handles hose lengths up to 2 m (65 ft) Structurally reinforced frame doesn t flex when handling hose Multiple mounting options Lightweight composite spool resists dents and corrosion Compact design easily fits inside tool bench or cabinet SD Steel Series Designed for daily use by professional mechanics Handles hose lengths up to 2 m (65 ft) Long-lasting spring provides constant spring torque through the entire range of motion Multiple mounting options Steel spool for demanding applications Open swivel ports ensure high fluid flow with minimal pressure loss XD Series Designed for robust/heavy-duty applications such as mobile lube trucks or large equipment service Hose lengths up to 2 m Dual pedestal frame provides increased strength for extreme-duty applications Long lasting spring is sealed for protection against the weather Durable steel spool rides on sealed roller bearings to ensure trouble-free performance 7 Series Fully ported swivel and shaft for unrestricted flow Handles hose lengths up to 23 m (75 ft) Heavy-duty ball bearings outlast sleeved-type bearings Easy rewind with minimal hose guidance Overhead mounting kit available 75 Series Heavy-duty, high volume reel Handles hose lengths up to 15 m (5 ft) Industrial-grade paint for high abrasion and corrosion resistance Full-flow shaft Heavy-duty brackets and springs Rugged base and hose rollers Heavy-duty latch mechanism Enclosures Enclosures provide protection to extend the life of hoses and bearings Designed for enclosing the LD and SD single pedestal reels End caps are easily removed for easy access to reels Enclosure mounting channels available to accommodate one to six reels 23

24 ABOUT GRACO Founded in 1926, Graco is a world leader in fluid handling systems and components. Graco products move, measure, control, dispense and apply a wide range of fluids and viscous materials used in vehicle lubrication, commercial and industrial settings. The company s success is based on its unwavering commitment to technical excellence, world-class manufacturing and unparalleled customer service. Working closely with qualified distributors, Graco offers systems, products and technology that set the quality standard in a wide range of fluid handling solutions. Graco provides equipment for spray finishing, protective coating, paint circulation, lubrication, and dispensing sealants and adhesives, along with power application equipment for the contractor industry. Graco s ongoing investment in fluid management and control will continue to provide innovative solutions to a diverse global market. GRACO LOCATIONS CONTACT MAILING ADDRESS P.O. Box 1441 Minneapolis, MN Tel: Fax: AMERICAS MINNESOTA Worldwide Headquarters Graco Inc th Avenue N.E. Minneapolis, MN EUROPE BELGIUM European Headquarters Graco N.V. Industrieterrein-Oude Bunders Slakweidestraat Maasmechelen, Belgium Tel: Fax: ASIA PACIFIC JAPAN Graco K.K Hayabuchi Tsuzuki-ku Yokohama City, Japan Tel: Fax: ASIA PACIFIC CHINA Graco Hong Kong Ltd. Representative Office Room 118 1st Floor No.2 Xin Yuan Building No.59 Cao Bao Road Shanghai, P.R. China 2233 Tel: Fax: ASIA PACIFIC KOREA Graco Korea Inc. Choheung Bank Building 4th Floor #1599 Gwanyang-Dong, Dongan-Ku, Anyang-Si, Gyunggi-Do, Korea Tel: 82(Korea) Fax: 82(Korea) All written and visual data contained in this document are based on the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice. Graco is certified ISO 91. Europe FAX Graco N.V E Rev. A 8/1 Printed in Europe. All other brand names or marks are used for identification purposes and are trademarks of their respective owners.