Solar Thermal Hot Water Systems Product Guide

Transcription

1 Solar Thermal Hot Water Systems Product Guide Solar hot water uses the heat from the sun s energy to heat your home s hot water supply for free. As the world leader in electric heating products, Dimplex is a trusted source of product innovation and reliability. For over 30 years, the company has invested the same dedication into renewable technologies. USA -300 S. Franklin Rd. Indianapolis, IN 469 CANADA 367 Industrial Rd. Cambridge, ON NR 7G8 Phone: Fax: Member of

2 Table Of Contents Solar Thermal Hot Water System Page Why Choose a Dimplex system Page Tips for a Professional Installation Page 3 Collector Placement Page 3 Solar Tank Installation Page 3 Pumping Station & Controls Page 3 How does it work? Page 4 How does a Single-Wall System work? Page 4 How does a Double-Wall System work? Page 4 The Complete Solar Thermal System (Single wall) Page 5 The Complete Solar Thermal System (Double wall) Page 6 Components Page 7 Collector Mounting Kits Page 7 Solar Storage Tanks Page 8 Controls Page 8 Pumping Stations Page 9 Parts and Accessories Page 0 Technical Specifications Page SRCC OG-300 Thermal Performance Ratings Page CSA F379 Thermal Performance Ratings Page Technical Specifications Collectors Page Collector Page Glass & Absorber Page Temperature & Pressure Page Approvals Page 3 SRCC OG-00 Thermal Performance Ratings Page 3 Technical Specifications Storage Tank Page 4 Product Warranty Page 5

3 Solar Thermal Hot Water System Dimplex solar hot water packages combine all the key components into easy-to-install kits for a typical three and four bedroom home. As hot water needs change during the homeowners lifetime, our systems are designed to react to fluctuations ensuring needs are always met. Have confidence knowing that every component has been carefully built for quality, suitability and reliability. Why choose a Dimplex System? Super Value: Designed to be the highest performance-to-cost system. Engineered Glycol Protection: Dimplex collectors limit the collector stagnation temperature to under 35 F/55 C protecting the glycol from overheating which can degrade heat transfer fluid and cause it to become acidic and corrosive. Highly Efficient: Blue titanium absorber surface coating sets the standard for premium collectors. Single Wall and Double Wall Systems available, depending on your local plumbing code requirements.

4 Tips for a Professional Installation Before installing the solar thermal system visit our web site at for a complete installation guide. Collector Placement: The proposed location must have access to southern sky with a minimum amount of shading between 0:00 AM and 3:00 PM each day throughout the year. Aesthetic impact on the property should be considered. Consider the remaining life span of the roof shingles prior to installation. Collectors mounted closer to the peak are easier to install by providing increased attic access. Collectors should be located as close to the solar storage tank as possible to minimize heat loss in pipe runs. Solar Tank Installation: Ensure you have allocated enough space for the solar storage tank installation (near the customer s back-up hot water source). The tank measures 63 ¼ high x ¾ diameter. Ensure the household s main supply of potable water is supplied in accordance to the North American Plumbing Code and Standards. Pumping Stations & Controls: Ensure sufficient wall space for pumping stations, expansion tanks and controller approximately x 4 wall space for single-wall systems, 4 x 4 wall space for double-wall systems. Close proximity to 0 volt supply. 3

5 How Does it Work? The first step is to determine if the local plumbing codes require a Single Wall or Double Wall System How Does a Single-Wall System Work? () The sun heats the solar fluid in the collectors () This solar fluid, a mixture of polypropylene glycol and water, for freeze protection, is pumped (3) and circulated through the in-tank heat exchanger (4). The solar controller has a sensor in the collector and the solar storage tank that activate the circulation pump when there is sufficient solar energy to be delivered. During times when there is little or no sun, a back-up heating system utilizing the customer s back-up tank (5) activates to provide adequate hot water. How Does a Double-Wall System Work? The Double Wall System consists of the same key components as the single wall with the addition of Dimplex s innovative modular HX-A pumping station with a second heat exchanger.. 4

6 The Complete Solar Thermal System Single-Wall Cat. No. Contents/Description Weight Std. Pack Pkg. Dim. L x W x H ESSW Solar hot water system, Indirect Single Wall HX ES-SW-A, collector 334 lbs. / 5 kg Skid 46 x 46 x 80 inches (03 x68 x 68 mm) This system includes the following components:. Solar Collector, FP-Blue-A, M. Mounting Kit, X DSCA 3. Fitting, Union, Compression 3/4 4. Fitting, Elbow, Compression 3/4 5. Fitting, End-Stop, Compression 6. Storage Tank, Solar HX, 53GAL/00L 7. Controller Solar -A 8. Pumping station, Solar Loop -A 9. Expansion Tank, Solar Loop, 6.6GAL/5L 0. Mounting Bracket, Expansion Tank, Solar Loop-A DSCA-M MK-DSCA NA NA4 DSTA NA 457. NA Note: the following installation components are not included in the systems: Propylene, Glycol, Dowfrost HD, 6.6 GAL/5L Copper Piping or Flextube Set, Insulated, / With Sensor Wire, 50FT/5M Pipe flashing kits for roof penetrations Piping to the back-up hot water heater 5

7 The Complete Solar Thermal System Double-Wall Cat. No. Contents/Description Weight Std. Pack Pkg. Dim. L x W x H ESDW Solar hot water system, Indirect Double Wall HX ES-DW-A, collector 36 lbs. / 64 kg Skid 46 x 46 x 80 inches (03 x 68 x 68 mm) This system includes the following components:. Solar Collector, FP-Blue-A, M. Mounting Kit, X DSCA 3. Fitting, Union, Compression 3/4 4. Fitting, Elbow, Compression 3/4 5. Fitting, End-Stop, Compression 6. Storage Tank, Solar HX, 53GAL/00L 7. Controller Solar -A 8. Pumping station, Solar Loop -A 9. Expansion Tank, Solar Loop, 6.6GAL/5L 0. Pumping Station, HX-A. Expansion tank, HX-A 0.5GAL/L. Mounting Bracket, Expansion Tank, Solar Loop-A DSCA-M MK-DSCA NA NA4 DSTA NA 457. NA NA Note: the following installation components are not included in the systems: Propylene, Glycol, Dowfrost HD, 6.6 GAL/5L Copper Piping or Flextube Set, Insulated, / With Sensor Wire, 50FT/5M Pipe flashing kits for roof penetrations Piping to the back-up hot water heater 6

8 Components Flat Plate Collectors A complete technical specification is listed under Technical Specifications Collectors The DSCA-M premium blue titanium absorber coating: Delivers the highest value-to-performance ratio of any solar thermal collector on the market. Sized to make it easier to handle (6 ½ x 3 ¼ feet, 83.5 pounds). Can be mounted horizontally or vertically. Engineered to operate at 6 bar, however each collector is tested to 0 Bar as part of Dimplex quality control. Surpasses CSA F378 & SRCC OG-00 requirement. Part No. Description Weight Std. Pack Pkg. Dim L x W x H DSCA-M Solar Collector, FP Blue- A, M 83.5 lbs. / 37.9 kg 79 x 4 3/8 x 3 5/6 inches (006 x 086 x 00 mm) Collector Mounting Kits Collectors are secured to asphalt shingle or steel roofs by four adjustable black anodized aluminum mounting brackets. Two on the top and two on the bottom. Each bracket rail is secured through the included flashing by a 3 lag screws. Plumbing connections and plugs can be reversed, as long as the outlet is located at the top of the panels. Only use the sensor well that is closest to the outlet. Mounting brackets shown in silver for contrast purposes only. Actual mounting kit is anodized black to blend with the roof. Item # Part number Description Components per collector # of collectors (in series) 3 4 DSCA-M Solar Collector, FP Blue-A, M 3 4 MK-DSCA Mounting Kit, x DSCA NA4 Fitting, Union, Compression ¾ Fitting, Elbow, Compression ¾ 5 NA4 Fitting End-Stop, Compression 7

9 Solar Storage Tanks A complete technical specification is listed under Technical Specifications Storage Tank The Dimplex DSTA-00 solar storage tank is designed as a pre-heat tank to store hot water. Volume is 53 US Gallons / 00 Litres and includes: An internal single-wall coiled heat exchanger High quality porcelain enameled surface and a large magnesium anode for corrosion protection Two sensor pockets for Dimplex solar controller s temperature probes Temperature & pressure relief valve Part No. Description Weight Std. Pack Pkg. Dim L x W x H DSTA-00 Storage Tank, Solar HX, 53gal/00L 65 lbs. / 75 kg 63 ¼ x ¾ x ¾ inches (607 x 55 x 55 mm) Controls The Dimplex Solar Controller provides the intelligence for the system. Intuitive menu allows easy operation with graphic symbols Storing of settings in case of any power outages Vacation setting enables the system to function normally, even when hot water is not used Digitally adjustable temperature differential regulation Extensive functions for system monitoring with iconic error and failure display Integrated energy productivity measurement measures the energy obtained by the system Part No. Description Weight Std. Pkg. Dim Pack L x W x H 45.5 NA Controller, Solar- A.5 lbs. / 0.68 kg 6 x 8 x ½ inches (5 x 03 x 38 mm) 8

10 Pumping Stations The Solar Pumping Station is supplied as a pre-assembled unit that contains all the necessary components i.e. valves, fittings and safety devices etc. that are required for performance of the solar thermal system. Check valve to prevent thermosyphoning of uncontrolled circulation of medium, preventing any cooling down of the storage tank. Integrated flush and fill points Air separator, collects air bubbles for ease of system bleeding Pressure relief valves Isolation valves Easy color identification where red lettering = forward flow; blue lettering = return flow Visual flow meter and sight glass to view glycol coloring Full body insulation Easy wall mounting with two bolts Part No. Description Weight Std. Pkg. Dim Pack L x W x H 457. NA Pumping Station, Solar Loop-A 4.7lbs. / 6.67 kg 0 x ½ x 0 inches (508 x 38 x 54 mm) Dimplex s innovative modular HX pumping station with integral heat exchanger is used in jurisdictions that require double-wall protection in the plumbing code. This pre-assembled unit and modular design converts a Single Wall System into a Double Wall System connecting directly below the solar pumping station. Check valve to prevent thermosyphoning of uncontrolled circulation of medium, prevents any cooling down of the storage tank. Isolation valve Leak detection valve Pressure gauge 0 Bar (9 PSI, 00 kpa) Integrated flush and fill point Full body insulation Easy wall mounting with two bolts. Part No. Description Weight Std. Pkg. Dim Pack L x W x H NA Pumping Station, HX-A 5lbs. / 7 x 0 x inches.34 kg (43 x 54 x 79 mm) 9

11 Parts and Accessories Item Number Part Number Description Weight Pkg. Dim. L x W x H MK-DSCA Mounting kit, x DSCA (4 pieces) 3 lbs. / 5.9 kg ¾ x 0 ¼ x 4 inches (34 x 60 x00 mm) NA4 Fitting, Union, Compression 3/4 ( piece) required to inter-connect collectors in parallel 0.5 lbs. / 0.3 kg 3 x x inches (76 x 5 x 5 mm) Fitting, Elbow, Compression 3/4 ( piece). Used to connect to Insulated Flex Tube Supply/Return Lines 0.34 lbs. / 0.7 kg 3 ½ x 3 ½ x ½ inches (89 x 89 x 38 mm) 4 NA4 Fitting, End-Stop, Compression ( piece) Used to cap-off unused headers 0.34 lbs. / 0.7 kg 3 x x inches (76 x 5 x 5 mm) 5 DGA-5 Propylene Glycol, Dowfrost HD, 6.6 GAL/5L 53 lbs. / 4 kg 3 x x inches (330 x 305 x 305 mm) Expansion Tank, Solar Loop, 6.6 GAL/5L. lbs. / 5.53 kg 0 x x inches (508 x 305 x 305 mm) 7 8 NA350-5 NA0 Flextube Set, Insulated / with sensor wire 50ft/5M Fitting, Flextube, 3/4 (8 pieces) 6 lbs. /.79 kg 3 x 3 x 0 inches (83 x 83 x 54 mm) 9 NA33 Mounting Bracket, Flextube, set of Expansion Tank, HX-A, 0.5GAL/L 3.5 lbs. /.59 kg 0 x 7 x 7 inches (54 x 78 x 78 mm) 7600 Mounting Bracket, Expansion Tank, Solar Loop-A 0. lbs. / 0.09 kg 6 x 6 x ½ inches (5 x 5 x 3 mm) 0

12 Technical Specifications System Specifications Dimplex Solar Thermal Systems are CSA, F379 and OG-300 certified by the Solar Rating and Certification Corporation (SRCC) and CSA. These packages are eligible for a growing number of government, utility and local financial incentives. SRCC System Name System System Model SRCC Cert. No. Solar Energy Factor Solar Domestic Hot Water System (SDHW) Solar Domestic Hot Water System (SDHW) Dimplex Indirect Solar Water Heating System - Single Wall Dimplex Indirect Solar Water Heating System - Double Wall ESSW ESDW CSA System Name System System Model Rating Solar Domestic Hot Water System (SDHW) Dimplex Indirect Solar Water Heating System - Single Wall ESSW 6.7 GJ/Year Solar Domestic Hot Water System (SDHW) Dimplex Indirect Solar Water Heating System - Double Wall ESDW 6.0 GJ/Year

13 Technical Specifications - Collectors Collector Specifications - DSCA-M Solar Collector FP-Blue-A, M Collector: Gross Collector Area.8 ft /.0 m Net Collector Aperture Area 0.0 ft /.86 m Frame Material Frame Colour Back Sheet Material Insulation Piping Connections Sensor Pockets Extruded aluminum Black Anodized Aluminum Rockwool Insulation Compression fittings to 3/4 insulated pipe or coupling on -side Glass & Absorber Absorber Material Absorber Type Red copper ultrasonically welded to risers Harp Absorber Coating Highly Selective Blue Titanium Surface Coating Solar Absorption α ~ 95% Coating Thermal Emissivity ε ~ 4% Glass Material Low-iron patterned tempered glass Solar Glass Transmission 9% - 93% Temperature & Pressure Stagnation Temperature (st order per OG-00) Fluid Capacity Design Flow Rate Pressure Drop at Design Flow Maximum Operating Pressure Maximum Connected Collectors 30 F / 55 C 0.5 gal /.8 L 0.64 GPM / kg/s 0.07 PSI / 7 Pa 87 PSI / 600 kpa 6 in series

14 Approvals SRCC OG-00 Certified and Listed CSA F378 Class Certified and Listed SRCC OG-00 Thermal Performance Ratings Category (Ti-Ta) Ti = Inlet Fluid Temperature Ta = Ambient Air Temperature Clear Day (,000 BTU/ft Day) Mildly Cloudy Day (,500 BTU/ft Day) Cloudy Day (,000 BTU/ft Day) A (-3 C/-9 F) Pool Heating - Warm Climate B (-3 C/9 F) Pool Heating - Cool Climate C ( C/36 F) Water Heating - Warm Climate D (3 C/90 F) Water Heating - Cool Climate E (6 F/44 F) Air Conditioning Thousands of BTU per day per collector. For kwh per day per collector, multiply by

15 Technical Specifications - Storage Tank Tank Specifications - DSTA-00 - Storage Tank, Solar HX, 53GAL/00L Specifications Storage Capacity 53 gal / 00 L Size (height & diameter) 63 ¼ x ¾ Dry Weight (including packaging) Maximum Tank Pressure Maximum Tank Temperature Heat Exchanger Material 65 lbs. / 75 kg 50 PSI 0 deg F / 99 deg C Porcelain enamel steel Heat Exchanger Area.454 ft /.558 m Heat Exchanger Volume Tank lining Insulation Corrosive Protection.76 gal / 6.67 L Porcelain enamel coated steel ¾ / 45 mm polyurethane (PU) foam insulation Porcelain enamel meets ASTM C33; CSA C309 Fittings & Connections Temperature & Pressure Valve Potable Water Connections Heat Exchanger Connections Sensor Connections T&P valve provided Inlet & Outlet ¾ NPT thread Inlet & Outlet ¾ NPT thread Two Sensor Wells 4

16 Product Warranty DIMPLEX NORTH AMERICA LIMITED - LIMITED WARRANTY FOR SOLAR PRODUCTS Scope of limited warranty coverage Dimplex North America Limited s ( Dimplex ) limited warranty to the original purchaser ( you ) of a product from the Dimplex product range set out below (each a Product ) is as follows (the Warranty ): Subject to the terms and conditions set out below, Dimplex warrants that new Products shall be free from defects in workmanship and materials under normal and proper usage, maintenance and service for the warranty periods set out below (each, a Warranty Period ). Upon expiration of the applicable Warranty Period, all liability of Dimplex in respect of the Warranties shall terminate. Dimplex will extend the coverage of the Warranty and the duration of the Warranty as set out below provided that you register for such extended warranty within 60 days from the date of installation of a Product by a Dimplex authorized dealer ( Dealer ). Registration for extended Warranty coverage may be made at: warranty_registration Catalogue Number Product Description Standard Warranty Coverage Extended Warranty Coverage ESSW ESDW DSCA-M Solar Hot Water System, Indirect Single wall HX ES-SW- A, Collector. Solar Hot Water System, Indirect Double Wall HX ES- DW-A, Collector Solar Collector, FP-BLUE-A, M year parts and freight to Dealer year parts and freight to Dealer year parts and freight to Dealer Warranty Period: 0 years on collectors 6 years on the tank years on the controls Coverage: parts Warranty Period: 0 years on collectors 6 years on the tank years on the controls Coverage: parts Warranty Period: 0 years Coverage: parts DSTA-00 Storage Tank, Solar HX, 53GAL/00L year parts and freight to Dealer Warranty Period: 6 years Coverage: parts Expansion Tank, Solar Loop, 6.6GAL/5L year parts and freight to Dealer N/A 45.5 NA Controller, SOLAR-A year parts and freight to Dealer Warranty Period: years Coverage: parts 457. NA Pumping station, SOLAR LOOP-A year parts and freight to Dealer N/A NA Pumping Station, HX-A year parts and freight to Dealer N/A Expansion Tank, HX-A, 0.5GAL/L year parts and freight to Dealer N/A 5

17 The Warranty Period begins on the date of purchase as shown on your invoice or purchase receipt (as applicable). Upon determination by Dimplex that a Product has manufacturing defects under proper use, maintenance and service, the sole remedy available to you is for Dimplex, at its option, to either: (i) replace the applicable Product; (ii) replace non-performing components of the applicable Product; or (iii) make all necessary repairs or modifications to the applicable Product. The Warranty applies to the original purchaser of a Product and is transferrable only to subsequent residents of the same address as such original purchaser. The Warranty may be subject to further limitations for purchases of Products made outside of the United States or Canada. Please consult your Dealer for further information regarding any such limitations. What is not covered by this limited warranty? The Warranty is void, does not apply under, and does not cover defects or damages to a Product resulting from any: (i) use with the applicable Product of components and/or parts that are not warranted by Dimplex; (ii) misuse, abuse, accident, negligence or alteration; (iii) improper installation of the applicable Product including, but not limited to, over-tightening of fittings, installation methods that are not in compliance with the applicable codes, regulations or ordinances of any applicable governmental authority, or installation that is otherwise not in accordance with Dimplex s installation and operating instructions; (iv) use of a Product for a purpose other than medium temperature (0-60 F / C) domestic or residential water heating; (v) improper maintenance, storage, handling or operation of the applicable Product; (vi) clouding or condensation; (vii) chemicals, fluids or liquids that are not authorized or otherwise approved by Dimplex for with the applicable Product; (viii) freezing temperatures and other natural or extreme weather conditions; and/or (ix) fire or other factors or circumstances that are outside of Dimplex s control including, but not limited to, an Act of God. The Warranty does not apply to and does not cover: (i) cosmetic damage including, without limitation, discoloration or glazing; or (ii) any breakage to any glass component of a Product. Further, the Warranty does not apply to and does not cover Products for which you do not have proper commissioning and maintenance records. How to Make a Warranty Claim? If you discover a defect in materials within the Warranty Period, you must promptly contact the Dealer to begin the Warranty claim process. Making a Warranty claim will require the following: a completed Dimplex warranty claim form (which will be provided to you by the Dealer as part of the claim process); proof of purchase of the Product from a Dealer; digital pictures of the alleged defective in the Product(s); applicable commissioning and maintenance records; and such other supporting documentation and materials as Dimplex may require. Additional conditions of this limited warranty? You must submit all necessary information requested by Dimplex through the Dealer for Dimplex to assess your warranty claim. The Warranty will extend only to claims received by Dimplex before the end of the applicable Warranty Period. Product removal, reinstallation, and related costs and fees are excluded from the Warranty. All replaced Products will become Dimplex s property and the replacement Product(s) becomes your property. 6

18 What Dimplex will do in the event of a valid warranty claim? Upon determination by Dimplex that a Warranty claim is valid, Dimplex shall either deliver repaired or replaced Product(s) or components to the Dealer, freight pre-paid by Dimplex or provide the end user a monetary value for the length of the product warranty in the amount of: $440 per collector, $75 for the tank and $350 for the controller. All other costs of removal and/or re-installation of the Product(s) or components associated with Dimplex s Warranty services including, but not limited to, any additional labour, shipping duty or other charges, shall be borne by you. Limitations of this limited warranty and what Dimplex is not responsible for THE WARRANTY IS YOUR EXCLUSIVE WARRANTY AND CONSTITUTES THE SOLE LIABIL- ITY OF DIMPLEX TO YOU FOR ALL PRODUCTS. DIMPLEX HEREBY DISCLAIMS ALL OTHER REPRESENTATIONS, WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OR CONDI- TIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. SOME JURIS- DICTIONS DO NOT ALLOW THE EXCLUSION OF EXPRESS OR IMPLIED WARRANTIES, SO THE FOREGOING EXCLUSIONS MAY NOT APPLY TO YOU. IN THAT EVENT, ALL EXPRESS AND IMPLIED WARRANTIES ARE THEN LIMITED TO THE WARRANTY PERIOD SET OUT ABOVE. TO THE MAXIMUM EXTENT PERMITTED BY LAW, IN NO EVENT WILL DIMPLEX, OR ITS DI- RECTORS, OFFICERS, OR AGENTS, BE LIABLE TO YOU OR ANY THIRD PARTY, WHETHER IN CONTRACT, IN TORT, OR ON ANY OTHER BASIS, FOR ANY INDIRECT, SPECIAL, PUNI- TIVE, EXEMPLARY, CONSEQUENTIAL, OR INCIDENTAL LOSS, COST, OR DAMAGE ARISING OUT OF OR IN CONNECTION WITH THE SALE, MAINTENANCE, USE, OR INABILITY TO USE THE PRODUCT, EVEN IF DIMPLEX OR ITS DIRECTORS, OFFICERS, OR AGENTS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS OR DAMAGES, OR IF SUCH LOSSES, COSTS, OR DAMAGES ARE FORESEEABLE. IN NO EVENT WILL DIMPLEX, OR ITS OFFICERS, DIRECTORS, OR AGENTS BE LIABLE FOR ANY DIRECT LOSSES, COSTS, OR DAMAGES THAT EXCEED THE PURCHASE PRICE OF THE PRODUCT. AS SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CON- SEQUENTIAL DAMAGES, THE ABOVE LIMITATIONS OR EXCLUSION MAY NOT APPLY TO YOU. This limited warranty gives you specific legal rights, and you may also have other rights which vary from jurisdiction to jurisdiction. Miscellaneous The division of this document into sections and the insertion of headings are for convenience of reference only and do not affect the construction or interpretation of this document. Each section of this document is distinct and severable. If any section of this document, in whole or in part, is or becomes illegal, invalid, void, voidable or unenforceable in any jurisdiction by any court of competent jurisdiction, the illegality, invalidity or unenforceability of that section, in whole or in part, will not affect: (i) the legality, validity or enforceability of the remaining sections of this document, in whole or in part; or (ii) the legality, validity or enforceability of that section, in whole or in part, in any other jurisdiction. The failure of Dimplex to exercise or enforce any right or provision of this document shall not operate as a waiver of such right or provision. This document is governed by, and is to be construed and interpreted in accordance with, the laws of the Province of Ontario and the laws of Canada applicable in that Province. The United Nations Convention on Contracts for the International Sale of Goods (also called the Vienna Convention, and which is cited in the statutes of Canada as the International Sale of Goods Contracts Convention Act) will not apply to this Agreement or the transactions contemplated by this Agreement. 7