Using the RS232 serial evaluation boards on a USB port
|
|
|
- Russell Timothy Caldwell
- 7 years ago
- Views:
Transcription
1 Document information Info Content Keywords Serial evaluation Board, PN512,PN532, MFRC663, MFRC522, MFRC523, MFRC52x, MFRD522, MFRD523, MFRD52x MIFARE Contactless Smart Card Reader Reference Design, MIFARE Reader IC, NFC controller Abstract This Application Note describes the settings for the USB to serial converter using a FTDI interface converter IC.
2 Revision history Rev Date Description Section License updated Initial version Contact information For more information, please visit: For sales office addresses, please send an to: All information provided in this document is subject to legal disclaimers. NXP B.V All rights reserved. 2 of 8
3 1. Introduction 1.1 Introduction NXP provides various development boards for systems supporting ISO/IEC14443 based contactless reader technology. Products are for example MFRC663, MFRC522, MFRC523, MFRC52x, MFRD522, MFRD523, MFRD52x, PN512 and PN532. The development boards make use of an serial RS232 interface which is connected to a PC to execute scripts or other PC based software to control the functionality of the contactless reader IC. More and more it is found that modern PC s are not equipped by default with the RS232 interface. A standard interface available on most PCs is the USB interface. Converters that are converting the signals of a USB interface to RS232 signals are available in the market. In practice we have found that not all USB /RS232 converters are working without problems. Reason for this problems could be that the designers of this interfaces need to find a compromise to fit most applications, so that it does not fit very well to the use case of transferring contactless data. 1.2 Scope This document describes which interface converter ad been found to work well with the NXP development boards. The settings to operate the interface with the NXP development boards will be given. 1.3 Hardware The interface IC s which had been found to work well are the ones from the company FTDI ( To allow USB converter chip to communicate with a PC, suitable USB drivers are required to be installed on the PC. These can be downloaded from the FTDI website. To verify that the DB9-USB-RS232 is communicating with the PC, an enumeration check can be carried out using a utility program called USB View. This is also available from the FTDI website. Alternative, the device manager can be used to check if a new USB device is available after installation. All information provided in this document is subject to legal disclaimers. NXP B.V All rights reserved. 3 of 8
4 1.4 Driver configuration settings In the windows device manager select the USB/RRS232 interface device, select the properties: Fig 1. US232R Properties All information provided in this document is subject to legal disclaimers. NXP B.V All rights reserved. 4 of 8
5 Choose the port settings, and advanced: Fig 2. USB Serial Port Properties All information provided in this document is subject to legal disclaimers. NXP B.V All rights reserved. 5 of 8
6 In the advanced settings for the COM port, select the detailed settings as below: Fig 3. Advanced COM settings Receive bytes: 64 Transmit bytes: 320 Latency timer: 4ms After applying these settings, close all windows. The USB to RS232 interface is now ready for use. All information provided in this document is subject to legal disclaimers. NXP B.V All rights reserved. 6 of 8
7 2. Legal information 2.1 Definitions Draft The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. 2.2 Disclaimers Limited warranty and liability Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. In no event shall NXP Semiconductors be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Notwithstanding any damages that customer might incur for any reason whatsoever, NXP Semiconductors aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of NXP Semiconductors. Right to make changes NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer s own risk. Applications Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Customers are responsible for the design and operation of their applications and products using NXP Semiconductors products, and NXP Semiconductors accepts no liability for any assistance with applications or customer product design. It is customer s sole responsibility to determine whether the NXP Semiconductors product is suitable and fit for the customer s applications and products planned, as well as for the planned application and use of customer s third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. NXP Semiconductors does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer s applications or products, or the application or use by customer s third party customer(s). Customer is responsible for doing all necessary testing for the customer s applications and products using NXP Semiconductors products in order to avoid a default of the applications and the products or of the application or use by customer s third party customer(s). NXP does not accept any liability in this respect. Export control This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from competent authorities. Evaluation products This product is provided on an as is and with all faults basis for evaluation purposes only. NXP Semiconductors, its affiliates and their suppliers expressly disclaim all warranties, whether express, implied or statutory, including but not limited to the implied warranties of noninfringement, merchantability and fitness for a particular purpose. The entire risk as to the quality, or arising out of the use or performance, of this product remains with customer. In no event shall NXP Semiconductors, its affiliates or their suppliers be liable to customer for any special, indirect, consequential, punitive or incidental damages (including without limitation damages for loss of business, business interruption, loss of use, loss of data or information, and the like) arising out the use of or inability to use the product, whether or not based on tort (including negligence), strict liability, breach of contract, breach of warranty or any other theory, even if advised of the possibility of such damages. Notwithstanding any damages that customer might incur for any reason whatsoever (including without limitation, all damages referenced above and all direct or general damages), the entire liability of NXP Semiconductors, its affiliates and their suppliers and customer s exclusive remedy for all of the foregoing shall be limited to actual damages incurred by customer based on reasonable reliance up to the greater of the amount actually paid by customer for the product or five dollars (US$5.00). The foregoing limitations, exclusions and disclaimers shall apply to the maximum extent permitted by applicable law, even if any remedy fails of its essential purpose. 2.3 Licenses Purchase of NXP ICs with NFC technology Purchase of an NXP Semiconductors IC that complies with one of the Near Field Communication (NFC) standards ISO/IEC and ISO/IEC does not convey an implied license under any patent right infringed by implementation of any of those standards. Purchase of NXP ICs with ISO/IEC type B functionality RATP/Innovatron Technology 2.4 Trademarks This NXP Semiconductors IC is ISO/IEC Type B software enabled and is licensed under Innovatron s Contactless Card patents license for ISO/IEC B. The license includes the right to use the IC in systems and/or end-user equipment. Notice: All referenced brands, product names, service names and trademarks are property of their respective owners. MIFARE is a trademark of NXP B.V. All information provided in this document is subject to legal disclaimers. NXP B.V All rights reserved. 7 of 8
8 3. Contents 1. Introduction Introduction Scope... 3 Hardware Driver configuration settings Legal information Definitions Disclaimers Licenses... 7 Trademarks Contents... 8 Please be aware that important notices concerning this document and the product(s) described herein, have been included in the section 'Legal information'. NXP B.V All rights reserved. For more information, visit: For sales office addresses, please send an to: salesaddresses@nxp.com Date of release: 1 August 2012 Document identifier:
AN11239. Boot mode jumper settings for LPC1800 and LPC4300. Document information
Rev. 1 1 July 2012 Application note Document information Info Keywords Abstract Content Hitex Rev A4, NGX Xplorer, Keil, element14, LPC1830, LPC1850, LPC4330, LPC4350, MCB1800, MCB4300 This application
AN11241. AES encryption and decryption software on LPC microcontrollers. Document information
AES encryption and decryption software on LPC microcontrollers Rev. 1 25 July 2012 Application note Document information Info Content Keywords AES, encryption, decryption, FIPS-197, Cortex-M0, Cortex-M3
AN1991. Audio decibel level detector with meter driver
Rev. 2.1 20 March 2015 Application note Document information Info Keywords Abstract Content SA604A, LM358, RSSI, cellular radio The SA604A can provide a logarithmic response proportional to the input signal
PN7120 Windows IoT Porting Guidelines. Rev. 1.0 13 October 2015 349610
Rev. 1.0 13 October 2015 Application note Document information Info Content Keywords Windows, Internet of Things, NFC, NXP, NCI Abstract This notes describes how to add support for PN7120 to a Windows
AN11357. BGU8009 Matching Options for 850 MHz / 2400 MHz Jammer Immunity. Document information. Keywords
BGU89 Matching Options for 85 MHz / 24 MHz Jammer Immunity Rev. 1 27 May 213 Application Note Document information Info Content Keywords LNA, GNSS, GPS, BGU89, WLAN, GSM-85, GSM-9 Abstract This document
UM10764. Vertical Alignment (VA) displays and NXP LCD drivers
Rev. 1 11 November 2013 User manual Document information Info Keywords Abstract Content Vertical Alignment, Twisted Nematic, LCD, PCA85232U, PCA85233UG, PCA8576FUG, PCF21219DUGR, PCA85262ATT, PCA85276ATT
AN11008 Flash based non-volatile storage
Rev. 1 5 January 2011 Application note Document information Info Content Keywords Flash, EEPROM, Non-Volatile Storage Abstract This application note describes the implementation and use of a library that
Mounting instructions for SOT78 (TO-220AB); SOT186A (TO-220F)
Mounting instructions for SOT78 (TO-220AB); SOT186A (TO-220F) Rev. 1 29 May 2012 Application note Document information Info Keywords Abstract Content SOT78; SOT186A; TO-220AB; TO-220F This application
AN11160. Designing RC snubbers
AN60 Rev. 25 April 202 Application note Document information Info Keywords Abstract Content RC snubber, commutation, reverse recovery, leakage inductance, parasitic capacitance, RLC circuit and damping,
AN10950. LPC24XX external memory bus example. Document information
Rev. 1.1 9 November 2012 Application note Document information Info Content Keywords LPC24XX, EMC, memory, SDRAM, SRAM, flash Abstract This application note will detail an example design illustrating how
Planar PIN diode in a SOD323 very small plastic SMD package.
Rev. 8 12 May 2015 Product data sheet 1. Product profile 1.1 General description Planar PIN diode in a SOD323 very small plastic SMD package. 1.2 Features and benefits High voltage, current controlled
Schottky barrier quadruple diode
Rev. 3 8 October 2012 Product data sheet 1. Product profile 1.1 General description with an integrated guard ring for stress protection. Two electrically isolated dual Schottky barrier diodes series, encapsulated
AN11007. Single stage 5-6 GHz WLAN LNA with BFU730F. document information
Single stage 5-6 GHz WLAN LNA with BFU730F Rev. 2 20 November 2012 Application note document information Info Content Keywords BFU730F, LNA, 802.11a & 802.11n MIMO WLAN Abstract The document provides circuit,
IP4220CZ6. 1. Product profile. Dual USB 2.0 integrated ESD protection. 1.1 General description. 1.2 Features and benefits. 1.
SOT457 Rev. 5 8 July 2011 Product data sheet 1. Product profile 1.1 General description The is designed to protect I/O lines sensitive to capacitive load, such as USB 2.0, ethernet, Digital Video Interface
NPN wideband transistor in a SOT89 plastic package.
SOT89 Rev. 05 21 March 2013 Product data sheet 1. Product profile 1.1 General description in a SOT89 plastic package. 1.2 Features and benefits High gain Gold metallization ensures excellent reliability
AN10866 LPC1700 secondary USB bootloader
Rev. 2 21 September 2010 Application note Document information Info Content Keywords LPC1700, Secondary USB Bootloader, ISP, IAP Abstract This application note describes how to add a custom secondary USB
HEF4011B. 1. General description. 2. Features and benefits. 3. Ordering information. 4. Functional diagram. Quad 2-input NAND gate
Rev. 6 10 December 2015 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The is a quad 2-input NAND gate. The outputs are fully buffered for the highest noise
DISCRETE SEMICONDUCTORS DATA SHEET. dbook, halfpage M3D088. BB201 Low-voltage variable capacitance double diode. Product specification 2001 Oct 12
DISCRETE SEMICONDUCTORS DATA SHEET dbook, halfpage M3D088 Low-voltage variable capacitance double 2001 Oct 12 Low-voltage variable capacitance double FEATURES Excellent linearity C1: 95 pf; C7.5: 27.6
10 ma LED driver in SOT457
SOT457 in SOT457 Rev. 1 20 February 2014 Product data sheet 1. Product profile 1.1 General description LED driver consisting of resistor-equipped PNP transistor with two diodes on one chip in an SOT457
Low forward voltage High breakdown voltage Guard-ring protected Hermetically sealed glass SMD package
Rev. 6 10 September 2010 Product data sheet 1. Product profile 1.1 General description Planar with an integrated guard ring for stress protection, encapsulated in a small hermetically sealed glass SOD80C
ES_LPC4357/53/37/33. Errata sheet LPC4357/53/37/33. Document information
Rev. 1.1 8 August 2012 Errata sheet Document information Info Keywords Abstract Content LPC4357FET256; LPC4357FET180; LPC4357FBD208; LPC4353FET256; LPC4353FET180; LPC4353FBD208; LPC4337FET256; LPC4337FET180;
1-of-4 decoder/demultiplexer
Rev. 6 1 April 2016 Product data sheet 1. General description 2. Features and benefits 3. Applications The contains two 1-of-4 decoders/demultiplexers. Each has two address inputs (na0 and na1, an active
BAT54 series SOT23 Schottky barrier diodes Rev. 5 5 October 2012 Product data sheet 1. Product profile 1.1 General description
SOT2 Rev. 5 5 October 2012 Product data sheet 1. Product profile 1.1 General description Planar with an integrated guard ring for stress protection, encapsulated in a small SOT2 (TO-26AB) Surface-Mounted
HEF4021B. 1. General description. 2. Features and benefits. 3. Ordering information. 8-bit static shift register
Rev. 10 21 March 2016 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The is an (parallel-to-serial converter) with a synchronous serial data input (DS), a clock
Passivated, sensitive gate triacs in a SOT54 plastic package. General purpose switching and phase control
TO-92 Rev. 9 9 November 2 Product data sheet. Product profile. General description Passivated, sensitive gate triacs in a SOT54 plastic package.2 Features and benefits Designed to be interfaced directly
The sensor can be operated at any frequency between DC and 1 MHz.
Rev. 6 18 November 2010 Product data sheet 1. Product profile 1.1 General description The is a sensitive magnetic field sensor, employing the magneto-resistive effect of thin film permalloy. The sensor
Quad 2-input NAND Schmitt trigger
Rev. 9 15 December 2015 Product data sheet 1. General description 2. Features and benefits 3. Applications The is a quad two-input NAND gate. Each input has a Schmitt trigger circuit. The gate switches
High-speed switching diodes. Type number Package Configuration Package NXP JEITA JEDEC
Rev. 8 18 November 2010 Product data sheet 1. Product profile 1.1 General description, encapsulated in small Surface-Mounted Device (SMD) plastic packages. Table 1. Product overview Type number Package
DISCRETE SEMICONDUCTORS DATA SHEET M3D848. CGD923 870 MHz, 20 db gain power doubler amplifier. Product specification 2002 Oct 08
DISCRETE SEMICONDUCTORS DATA SHEET M3D848 2002 Oct 08 FEATURES High output capability Excellent linearity Extremely low noise Excellent return loss properties Rugged construction Gold metallization ensures
AN11261. Using RC Thermal Models. Document information
Rev. 2 19 May 2014 Application note Document information Info Keywords Abstract Content RC thermal, SPICE, Models, Z th, R th, MOSFET, Power Analysis of the thermal performance of power semiconductors
SiGe:C Low Noise High Linearity Amplifier
Rev. 2 21 February 2012 Product data sheet 1. Product profile 1.1 General description The is a low noise high linearity amplifier for wireless infrastructure applications. The LNA has a high input and
AN11243. Failure signature of electrical overstress on power MOSFETs. Document information
Rev. 01 29 October 2012 Application note Document information Info Keywords Abstract Content Power MOSFETs, Electrical Overstress (EOS), Unclamped Inductive Switching (UIS) When Power MOSFETs fail, there
AN10811 Programming SPI flash on EA3131 boards Rev. 01 1 May 2009 Application note Document information Info Content Keywords Abstract
Rev. 01 1 May 2009 Application note Document information Info Keywords Abstract Content LPC3130, LPC3131, SPI flash Example for programming SPI flash on EA3131 boards. Revision history Rev Date Description
BAS16 series. 1. Product profile. High-speed switching diodes. 1.1 General description. 1.2 Features and benefits. 1.
Rev. 6 4 September 04 Product data sheet. Product profile. General description, encapsulated in small Surface-Mounted Device (SMD) plastic packages. Table. Product overview Type number Package Configuration
The 74LVC1G11 provides a single 3-input AND gate.
Rev. 8 17 September 2015 Product data sheet 1. General description The provides a single 3-input AND gate. The input can be driven from either 3.3 V or 5 V devices. This feature allows the use of this
EULA - Page 2 of 5 any service, account, computer systems or networks associated with the Internet-based services provided by ESI-TECNALIA.
EULA - Page 1 of 5 END-USER LICENSE AGREEMENT FOR ESI-TECNALIA SOFTWARE IMPORTANT READ CAREFULLY: This End-User License Agreement ("EULA") is a legal agreement between you (either an individual or a single
AN11122. Water and condensation safe touch sensing with the NXP capacitive touch sensors. Document information
with the NXP capacitive touch sensors Rev. 3 14 March 2014 Application note Document information Info Keywords Abstract Content PCF8883, PCA8885, PCF8885, PCA8886 This application note explains the unique
3-to-8 line decoder, demultiplexer with address latches
Rev. 7 29 January 2016 Product data sheet 1. General description The is a high-speed Si-gate CMOS device and is pin compatible with low-power Schottky TTL (LSTTL). The is specified in compliance with JEDEC
AN10724. TDA8026ET - 5 slots smart card interface. Document information
Rev. 1.0 27 September 2011 Application note Document information Info Content Keywords TDA8026, 5 slots, Smart Card Interface, Banking, EMV, Point-Of-Sale, ISO 7816-3 Abstract This application note describes
DATA SHEET. BF245A; BF245B; BF245C N-channel silicon field-effect transistors DISCRETE SEMICONDUCTORS
DISCRETE SEMICONDUCTORS DATA SHEET N-channel silicon field-effect transistors Supersedes data of April 995 996 Jul BF5A; BF5B; BF5C FEATURES Interchangeability of drain and source connections Frequencies
DUAL MONITOR DRIVER AND VBIOS UPDATE
DUAL MONITOR DRIVER AND VBIOS UPDATE RN-07046-001_v01 September 2013 Release Notes DOCUMENT CHANGE HISTORY RN-07046-001_v01 Version Date Authors Description of Change 01 September 30, 2013 MD, SM Initial
AN11480. Quick Start Up Guide for EXPLORE NFC working with Raspberry Pi. Application note COMPANY PUBLIC. Rev. 1.0 17 December 2013 279710
Quick Start Up Guide for EXPLORE NFC working with Raspberry Pi Document information Info Content Keywords PN512; Raspberry Pi, NFC, P2P, Card Emulation, MIFARE, ISO/IEC 14443, EXPLORE-NFC Abstract This
74HC02; 74HCT02. 1. General description. 2. Features and benefits. Ordering information. Quad 2-input NOR gate
Rev. 5 26 November 2015 Product data sheet 1. General description 2. Features and benefits The is a quad 2-input NOR gate. Inputs include clamp diodes. This enables the use of current limiting resistors
74HC377; 74HCT377. 1. General description. 2. Features and benefits. 3. Ordering information
Rev. 4 24 February 2016 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The is an octal positive-edge triggered D-type flip-flop. The device features clock (CP)
14-stage ripple-carry binary counter/divider and oscillator
Rev. 8 25 March 2016 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The is a with three oscillator terminals (RS, REXT and CEXT), ten buffered outputs (Q3 to
45 V, 100 ma NPN general-purpose transistors
Rev. 9 2 September 214 Product data sheet 1. Product profile 1.1 General description NPN general-purpose transistors in Surface-Mounted Device (SMD) plastic packages. Table 1. Product overview Type number
Triple single-pole double-throw analog switch
Rev. 12 25 March 2016 Product data sheet 1. General description 2. Features and benefits 3. Applications 4. Ordering information The is a triple single-pole double-throw (SPDT) analog switch, suitable
74HC175; 74HCT175. Quad D-type flip-flop with reset; positive-edge trigger
Rev. 5 29 January 2016 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The is a quad positive-edge triggered D-type flip-flop with individual data inputs (Dn)
DISCRETE SEMICONDUCTORS DATA SHEET. BT151 series C Thyristors
DISCRETE SEMICONDUCTORS DATA SHEET Product specification April 24 Product specification GENERAL DESCRIPTION QUICK REFERENCE DATA Passivated thyristors in a plastic SYMBOL PARAMETER MAX. MAX. MAX. UNIT
Low-power configurable multiple function gate
Rev. 7 10 September 2014 Product data sheet 1. General description The provides configurable multiple functions. The output state is determined by eight patterns of 3-bit input. The user can choose the
HEF4013B. 1. General description. 2. Features and benefits. 3. Applications. 4. Ordering information. Dual D-type flip-flop
Rev. 9 10 December 2015 Product data sheet 1. General description 2. Features and benefits 3. Applications The is a dual D-type flip-flop that features independent set-direct input (SD), clear-direct input
Ultrafast, epitaxial rectifier diode in a SOD59 (TO-220AC) plastic package
TO-220AC 27 May 2015 Product data sheet 1. General description Ultrafast, epitaxial rectifier diode in a SOD59 (TO-220AC) plastic package 2. Features and benefits Fast switching Low thermal resistance
QUADRO POWER GUIDELINES
QUADRO POWER GUIDELINES DA-07261-001_v03 July 2015 Application Note DOCUMENT CHANGE HISTORY DA-07261-001_v03 Version Date Authors Description of Change 01 June 6, 2014 VL, SM Initial Release 02 June 2,
1. GRANT OF LICENSE. Formdocs LLC grants you the following rights provided that you comply with all terms and conditions of this EULA:
END-USER LICENSE AGREEMENT FOR FORMDOCS SOFTWARE IMPORTANT-READ CAREFULLY: This End-User License Agreement ("EULA") is a legal agreement between you (either an individual or a single entity) and Formdocs
BlackBerry Business Cloud Services. Version: 6.1.7. Release Notes
BlackBerry Business Cloud Services Version: 6.1.7 Release Notes Published: 2015-04-02 SWD-20150402141754388 Contents 1 Related resources...4 2 What's new in BlackBerry Business Cloud Services 6.1.7...
MFRD52x. Mifare Contactless Smart Card Reader Reference Design. Document information
Rev. 2.1 17. April 2007 Preliminary Data Sheet Document information Info Keywords Content MFRC522, MFRC523, MFRC52x, MFRD522, MFRD523, Mifare Contactless Smart Card Reader Reference Design, Mifare Reader
LIN-bus ESD protection diode
Rev. 3 31 May 2011 Product data sheet 1. Product profile 1.1 General description in a very small SOD323 (SC-76) Surface-Mounted Device (SMD) plastic package designed to protect one automotive Local Interconnect
THIS PRODUCT DOES NOT TRANSMIT ANY PERSONALLY IDENTIFIABLE INFORMATION FROM YOUR COMPUTER TO MICROSOFT COMPUTER SYSTEMS WITHOUT YOUR CONSENT.
Microsoft Windows XP Media Center Edition 2005 SUPPLEMENTAL END-USER LICENSE AGREEMENT IMPORTANT READ CAREFULLY: This supplemental end-user license agreement ( Supplemental EULA ) is a legal agreement
74HC238; 74HCT238. 3-to-8 line decoder/demultiplexer
Rev. 4 27 January 2016 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The decodes three binary weighted address inputs (A0, A1 and A2) to eight mutually exclusive
8-channel analog multiplexer/demultiplexer
Rev. 12 25 March 2016 Product data sheet 1. General description The is an with three address inputs (S1 to S3), an active LOW enable input (E), eight independent inputs/outputs (Y0 to Y7) and a common
Partners in Care Welch Allyn Connex Software Development Kit License Agreement
This Software Development Kit End User ( Agreement ) is between Welch Allyn, Inc. ( Welch Allyn ) and the Customer identified in the purchase order ( Customer or You ), and it governs the Software Development
AN10850. LPC1700 timer triggered memory to GPIO data transfer. Document information. LPC1700, GPIO, DMA, Timer0, Sleep Mode
LPC1700 timer triggered memory to GPIO data transfer Rev. 01 16 July 2009 Application note Document information Info Keywords Abstract Content LPC1700, GPIO, DMA, Timer0, Sleep Mode This application note
74HC2G02; 74HCT2G02. 1. General description. 2. Features and benefits. 3. Ordering information. Dual 2-input NOR gate
Rev. 5 27 September 2013 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The is a dual 2-input NOR gate. Inputs include clamp diodes. This enables the use of
General purpose low power phase control General purpose low power switching Solid-state relay. Symbol Parameter Conditions Min Typ Max Unit V DRM
TO-92 May 25 Product data sheet. General description Planar passivated very sensitive gate four quadrant triac in a SOT54 plastic package intended to be interfaced directly to microcontrollers, logic integrated
AGREEMENT BETWEEN USER AND Caduceon Environmental Laboratories Customer Portal
Terms of Use AGREEMENT BETWEEN USER AND Caduceon Environmental Laboratories Customer Portal The Caduceon Environmental Laboratories Customer Portal Web Site is comprised of various Web pages operated by
74HC154; 74HCT154. 4-to-16 line decoder/demultiplexer
Rev. 7 29 February 2016 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The is a. It decodes four binary weighted address inputs (A0 to A3) to sixteen mutually
CITRIX SYSTEMS, INC. SOFTWARE LICENSE AGREEMENT
CITRIX SYSTEMS, INC. SOFTWARE LICENSE AGREEMENT PLEASE READ THIS SOFTWARE LICENSE AGREEMENT CAREFULLY BEFORE DOWNLOADING, INSTALLING OR USING CITRIX OR CITRIX-SUPPLIED SOFTWARE. BY DOWNLOADING OR INSTALLING
These TERMS AND CONDICTIONS (this Agreement ) are agreed to between InfluencersAtWork,
TERMS AND CONDITIONS INFLUENCERS AT WORK These TERMS AND CONDICTIONS (this Agreement ) are agreed to between InfluencersAtWork, Ltd. ( InfluencerAtWork ) and you, or if you represent a company or other
BLL6G1214L-250. 1. Product profile. LDMOS L-band radar power transistor. 1.1 General description. 1.2 Features and benefits. 1.
BLL6G1214L-25 Rev. 1 16 February 212 Preliminary data sheet 1. Product profile 1.1 General description 25 W LDMOS power transistor intended for L-band radar applications in the 1.2 GHz to 1.4 GHz range.
IP4294CZ10-TBR. ESD protection for ultra high-speed interfaces
XSON1 Rev. 4 1 November 213 Product data sheet 1. Product profile 1.1 General description The device is designed to protect high-speed interfaces such as SuperSpeed USB, High-Definition Multimedia Interface
Website Hosting Agreement
Website Hosting Agreement 6 oak grove avenue This Hosting Contract governs your purchase and use, in any manner, of all Web site hosting services, including the Shared Hosting Services, (collectively,
If you do not wish to agree to these terms, please click DO NOT ACCEPT and obtain a refund of the purchase price as follows:
IMPORTANT: READ THIS AGREEMENT CAREFULLY. THIS IS A LEGAL AGREEMENT BETWEEN AVG TECHNOLOGIES CY, Ltd. ( AVG TECHNOLOGIES ) AND YOU (ACTING AS AN INDIVIDUAL OR, IF APPLICABLE, ON BEHALF OF THE INDIVIDUAL
Femtofarad bidirectional ESD protection diode
Rev. 3 24 October 2011 Product data sheet 1. Product profile 1.1 General description Femtofarad bidirectional ElectroStatic Discharge (ESD) protection diode in a leadless ultra small SOD882 Surface-Mounted
Work Space Manager for BES12 26387_449
Work Space Manager for BES12 26387_449 About this document This guide contains fixed and known issues for version 26387_449 of Work Space Manager for BES12. To see previous versions of the release notes,
MIFARE ISO/IEC 14443 PICC
Rev. 3.0 26 June 2009 130830 Application note PUBLIC Document information Info Keywords Abstract Content Activate Card, MIFARE, Select Card This Application te shows the elementary communication for selecting
74HC107; 74HCT107. Dual JK flip-flop with reset; negative-edge trigger
Rev. 5 30 November 2015 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The is a dual negative edge triggered JK flip-flop featuring individual J and K inputs,
MDM Zinc 3.0 End User License Agreement (EULA)
MDM Zinc 3.0 End User License Agreement (EULA) THIS AGREEMENT (or "EULA") IS A LEGAL AGREEMENT BETWEEN THE PERSON, COMPANY, OR ORGANIZATION THAT HAS LICENSED THIS SOFTWARE ("YOU" OR "CUSTOMER") AND MULTIDMEDIA
We suggest you retain a copy of these End User Terms of Use for your records.
END USER TERMS OF USE The use of Incident Response Technologies Inc. s ("IRT") Software is offered to you upon your acceptance of these End User Terms of Use. By using IRT s software (the Software ), you
ENHANCED HOST CONTROLLER INTERFACE SPECIFICATION FOR UNIVERSAL SERIAL BUS (USB) 2.0 - ADOPTERS AGREEMENT
ENHANCED HOST CONTROLLER INTERFACE SPECIFICATION FOR UNIVERSAL SERIAL BUS (USB) 2.0 - ADOPTERS AGREEMENT This Enhanced Host Controller Interface Specification for Universal Serial Bus (USB) 2.0 - Adopters
74HCU04. 1. General description. 2. Features and benefits. 3. Ordering information. Hex unbuffered inverter
Rev. 7 8 December 2015 Product data sheet 1. General description The is a hex unbuffered inverter. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to
CereVoice Cloud Text To Speech Web Service Terms and Conditions Of Usage Agreement
This ("Agreement") is a legal agreement between you (either as an individual or as single legal entity, referred to in this Agreement as "SERVICE USER") and CereProc Ltd ("CereProc") for the use of the
1. GRANT OF LICENSE. Acunetix Ltd. grants you the following rights provided that you comply with all terms and conditions of this EULA:
Acunetix Web Vulnerability Scanner Licensed Copies: 1 END USER LICENSE AGREEMENT IMPORTANT READ CAREFULLY: This End User License Agreement ("EULA") is a legal agreement between you (either an individual
Temperature & Humidity SMS Alert Controller
Temperature & Humidity SMS Alert Controller Version 7 [Windows XP/Vista/7] GSMS THR / GSMS THP Revision 110507 [Version 2.2.14A] ~ 1 ~ SMS Alarm Messenger Version 7 [Windows XP/Vista/7] SMS Pro series
ESD protection for high-speed interfaces
Rev. 1 1 October 212 Product data sheet 1. Product profile 1.1 General description The device is designed to protect high-speed interfaces such as High-Definition Multimedia Interface (HDMI), DisplayPort,
NPN wideband silicon RF transistor
Rev. 1 13 January 2014 Product data sheet 1. Product profile 1.1 General description NPN silicon RF transistor for high speed, low noise applications in a plastic, 3-pin SOT23 package. The is part of the
74HC138; 74HCT138. 3-to-8 line decoder/demultiplexer; inverting
Rev. 6 28 December 2015 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The decodes three binary weighted address inputs (A0, A1 and A2) to eight mutually exclusive
AN10860_1. Contact information. NXP Semiconductors. LPC313x NAND flash data and bad block management
Rev. 01 11 August 2009 Application note Document information Info Keywords Abstract Content LPC3130 LPC3131 LPC313x LPC313X LPC3153 LPC3154 LPC3141 LPC3142 LPC31XX LPC31xx Linux kernel Apex boot loader
PerfectForms End-User License Agreement
PerfectForms End-User License Agreement 2011 PerfectForms Page 1 of 12 Contents 1. DEFINITIONS... 4 2. GRANT OF RIGHTS... 4 3. FEES... 5 4. CONFIGURATION... 5 5. INTELLECTUAL PROPERTY... 5 6. TERM AND
New Security Features
New Security Features BlackBerry 10 OS Version 10.3.2 Published: 2015-06-08 SWD-20150608104314635 Contents About this guide... 4 What's new... 4 NFC smart card support... 5 OCSP stapling support in the
Near Field Communication (NFC) controller. The PN533 supports four main operating modes:
158233 1. General description The is a highly integrated transceiver module for contactless communication at 13.56 MHz based on the 80C51 microcontroller core. A dedicated ROM code is implemented to handle
FAX-TO-EMAIL END-USER LICENSE AGREEMENT
FAX-TO-EMAIL END-USER LICENSE AGREEMENT This Agreement, which governs the terms and conditions of your use of the Fax-to-Email Services, is between you ("you" or "End-User") and ( we, us, our or Company
ELECTRONIC ARTS SOFTWARE END USER LICENSE AGREEMENT
ELECTRONIC ARTS SOFTWARE END USER LICENSE AGREEMENT This End User License Agreement ( License ) is an agreement between you and Electronic Arts Inc., its subsidiaries and affiliates ( EA ). This License
1.1 Authorized User means an employee of Customer who has been issued a User ID in accordance with Section 3.2(a).
RealPrence Cloud Video Meeting Services POLYCOM, INC., VIDEO-AS-A-SERVICE TERMS OF SERVICE This Video-as-a-Service Terms of Service (the Agreement ) govern the access to and use of the VaaS by each person
ALM Works End-User License Agreement for Structure Plugin
ALM Works End-User License Agreement for Structure Plugin IMPORTANT - READ CAREFULLY: This End-User License Agreement (EULA) is a legal agreement between you (either an individual or a single legal entity)
Software Hosting and End-User License Subscription Agreement
Software Hosting and End-User License Subscription Agreement (Last Updated October 31, 2015) IMPORTANT! The Contrail software (the "SOFTWARE") that you seek to use was developed by OneRain Incorporated
Dell Spotlight on Active Directory 6.8.3. Server Health Wizard Configuration Guide
Dell Spotlight on Active Directory 6.8.3 Server Health Wizard Configuration Guide 2013 Dell Software Inc. ALL RIGHTS RESERVED. This guide contains proprietary information protected by copyright. The software
Release Notes. BlackBerry Web Services. Version 12.1
Release Notes BlackBerry Web Services Version 12.1 Published: 2015-02-25 SWD-20150225105429677 Contents New features in BES12... 4 12.1... 4 Unsupported as of 12.1... 6 Fixed issues...9 Known issues...
8-bit binary counter with output register; 3-state
Rev. 3 24 February 2016 Product data sheet 1. General description The is an 8-bit binary counter with a storage register and 3-state outputs. The storage register has parallel (Q0 to Q7) outputs. The binary
BlackBerry Mobile Voice System - BlackBerry MVS Client
BlackBerry Mobile Voice System - BlackBerry MVS Client BlackBerry Device Software 5.0 User Guide Version: 5.2 SWD-1249531-0316085151-001 Contents Basics... 2 About the BlackBerry MVS Client... 2... 3 basics...
74HC4040; 74HCT4040. 12-stage binary ripple counter
Rev. 5 3 February 2016 Product data sheet 1. General description 2. Features and benefits 3. Applications 4. Ordering information The is a with a clock input (CP), an overriding asynchronous master reset