NetApp FAS/V-Series Storage Replication Adapter for Clustered Data ONTAP

Transcription

1 NetApp FAS/V-Series Storage Replication Adapter for Clustered Data ONTAP For VMware vcenter Site Recovery Manager Release Notes NetApp, Inc. 495 East Java Drive Sunnyvale, CA U.S. Telephone: +1(408) Fax: +1(408) Support telephone: +1 (888) Web: Feedback: Part number: _A0 ur001 June 2013

2

3 Table of Contents 3 Contents Storage Replication Adapter new features... 4 System requirements for using Storage Replication Adapter... 5 Features not supported in Storage Replication Adapter... 7 Fixed issues... 8 Storage Replication Adapter known issues and limitations... 9 Reprotect operations fail... 9 Where to find more information Viewing product bugs using Bugs Online Copyright information Trademark information How to send your comments... 13

4 4 Storage Replication Adapter Release Notes Storage Replication Adapter new features Storage Replication Adapter for clustered Data ONTAP supports all the workflows in Site Recovery Manager 5.0 and Site Recovery Manager 5.1, such as the discovery of arrays and replicated devices, test recovery, recovery (planned migration and disaster recovery), and reprotect capability. Volume filtering and automatic igroup creation are also supported. Automatic NFS LIF discovery This feature enables Storage Replication Adapter to automatically detect addresses to be used for NFS mounts if you have configured LIFs for use with NFS. NFS host name mounting This feature enables Storage Replication Adapter to report NFS host names to Site Recovery Manager so that ESX or ESXi hosts can perform NFS mounts by using the host name rather than the IP address for failover and test failover operations. For more information about Storage Replication Adapter, see the Storage Replication Adapter Installation and Administration Guide on the NetApp Support Site. Related information NetApp Support Site: support.netapp.com

5 5 System requirements for using Storage Replication Adapter Before you run Storage Replication Adapter, you must meet certain requirements related to Data ONTAP and Site Recovery Manager. For the 32-bit Storage Replication Adapter, the Site Recovery Manager version you are using must be 5.0. For the 64-bit Storage Replication Adapter, the Site Recovery Manager version you are using must be 5.1. Site Recovery Manager 5.0 or Site Recovery Manager 5.1 must be installed on Windows. Site Recovery Manager supports VMFS (iscsi and FC), RDM (iscsi and FC), and NFS storage environments. Your storage system must be running Data ONTAP for configuring Vservers as storage arrays. Attention: You should not use qtrees in VMware environments. FlexClone license must be enabled for test failover operation. The license is optional because test failover operation can be performed when the option replication_disruptive_test_failover is set to on in the ontap_config file. SnapRestore license must be enabled on the storage system to perform recovery. SnapMirror license must be enabled on the storage system. In a NAS environment, NFS services must be running. In a SAN environment, iscsi, FC, or both the services must be running. Storage Replication Adapter must be installed on the Site Recovery Manager server at the protected and recovery sites. Perl must be installed on the system on which Site Recovery Manager is installed. Note: If the Site Recovery Manager installation does not include the required Perl version, you can install Perl separately with the default configuration. For more information about downloading Perl, see the Perl download page. To use securehttp, SSH must be enabled using security login. By default, SSL is enabled. By default, Storage Replication Adapter calls the Data ONTAP API over HTTP. The 80 or 443 port corresponding to the HTTP or SSL protocol must be open on the firewall. The port is between the Site Recovery Manager server and the storage system running Data ONTAP. For a detailed list of the supported software version and storage systems, see the Interoperability Matrix. For information about the NetApp platforms that are supported in the VMware environment, see the NetApp-VMware platform compatibility matrix on the VMware site.

6 6 Storage Replication Adapter Release Notes Related information VMware Interoperability Matrix: devicecategory=srax Perl script download page: NetApp Support Site: support.netapp.com Interoperability Matrix: support.netapp.com/now/products/interoperability

7 7 Features not supported in Storage Replication Adapter Some features and functions are not supported in Storage Replication Adapter. Failover of exports or LUNs that have multiple replication destinations SnapMirror relationships and multiple destinations within the same SnapMirror relationship are also not supported. Recovery from a specific quiesced or non-quiesced SMVI Snapshot copy Storage Replication Adapter recovers data only from the last replicated SnapMirror Snapshot copy. SnapMirror load-sharing This feature is not supported because Storage Replication Adapter does not support SnapMirror relationships on a single storage cluster.

8 8 Storage Replication Adapter Release Notes Fixed issues Some known issues have been fixed in Storage Replication Adapter for clustered Data ONTAP. The following issues are fixed in this release: Failover and test-failover fail (bug ID ) Storage Replication Adapter is not dependent on QueryReplication Settings during reverse replication operation (bug ID ) Recovery operation fails due to Storage Replication Adapter timeout (bug ID )

9 9 Storage Replication Adapter known issues and limitations You must be aware of the known issues, limitations, and workarounds for Storage Replication Adapter so that you can use the product more effectively. Reprotect operations fail Reprotect operations fail in some cases if they are run before the discovery of devices on the source and destination is completed. If discovery continues to run in the background, the current state of some of the devices might not be updated in the database and Site Recovery Manager checks this database for the state of the devices. Workaround In Site Recovery Manager, click Array Managers, and then click Devices to verify that the discovery of devices is completed on the source and destination before starting a new reprotect operation.

10 10 Storage Replication Adapter Release Notes Where to find more information You can access Technical Support and documentation for all NetApp products on the NetApp Support Site at support.netapp.com. In addition to product documentation, NetApp provides other product information, such as technical reports and white papers. Viewing product bugs using Bugs Online NetApp provides an online tool that lets you search for the most current information about a known bug. You can also use this tool, which is available on the NetApp Support Site, to get a list of current or fixed bugs for a particular product, and search for information by bug number, keyword, or software product. About this task You can also set Bugs Online to automatically display all bugs of interest to you. Steps 1. Access Bugs Online at 2. Search for the bug in one of the following ways: Enter the bug number. Enter keywords related to the bug. From the list in the Bug Type(s) field or the Product Type(s) field, select a software product. Some products are listed in one field and some in the other field. Be sure to check both to find the product you want. 3. To display all bugs of interest to you, use the New Bug Alerts Profiler at the bottom of the Bugs Online page to set bug searching criteria that matches your requirements.

11 11 Copyright information Copyright NetApp, Inc. All rights reserved. Printed in the U.S. No part of this document covered by copyright may be reproduced in any form or by any means graphic, electronic, or mechanical, including photocopying, recording, taping, or storage in an electronic retrieval system without prior written permission of the copyright owner. Software derived from copyrighted NetApp material is subject to the following license and disclaimer: THIS SOFTWARE IS PROVIDED BY NETAPP "AS IS" AND WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WHICH ARE HEREBY DISCLAIMED. IN NO EVENT SHALL NETAPP BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. NetApp reserves the right to change any products described herein at any time, and without notice. NetApp assumes no responsibility or liability arising from the use of products described herein, except as expressly agreed to in writing by NetApp. The use or purchase of this product does not convey a license under any patent rights, trademark rights, or any other intellectual property rights of NetApp. The product described in this manual may be protected by one or more U.S. patents, foreign patents, or pending applications. RESTRICTED RIGHTS LEGEND: Use, duplication, or disclosure by the government is subject to restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at DFARS (October 1988) and FAR (June 1987).

12 12 Storage Replication Adapter Release Notes Trademark information NetApp, the NetApp logo, Network Appliance, the Network Appliance logo, Akorri, ApplianceWatch, ASUP, AutoSupport, BalancePoint, BalancePoint Predictor, Bycast, Campaign Express, ComplianceClock, Cryptainer, CryptoShred, Data ONTAP, DataFabric, DataFort, Decru, Decru DataFort, DenseStak, Engenio, Engenio logo, E-Stack, FAServer, FastStak, FilerView, FlexCache, FlexClone, FlexPod, FlexScale, FlexShare, FlexSuite, FlexVol, FPolicy, GetSuccessful, gfiler, Go further, faster, Imagine Virtually Anything, Lifetime Key Management, LockVault, Manage ONTAP, MetroCluster, MultiStore, NearStore, NetCache, NOW (NetApp on the Web), Onaro, OnCommand, ONTAPI, OpenKey, PerformanceStak, RAID-DP, ReplicatorX, SANscreen, SANshare, SANtricity, SecureAdmin, SecureShare, Select, Service Builder, Shadow Tape, Simplicity, Simulate ONTAP, SnapCopy, SnapDirector, SnapDrive, SnapFilter, SnapIntegrator, SnapLock, SnapManager, SnapMigrator, SnapMirror, SnapMover, SnapProtect, SnapRestore, Snapshot, SnapSuite, SnapValidator, SnapVault, StorageGRID, StoreVault, the StoreVault logo, SyncMirror, Tech OnTap, The evolution of storage, Topio, vfiler, VFM, Virtual File Manager, VPolicy, WAFL, Web Filer, and XBB are trademarks or registered trademarks of NetApp, Inc. in the United States, other countries, or both. IBM, the IBM logo, and ibm.com are trademarks or registered trademarks of International Business Machines Corporation in the United States, other countries, or both. A complete and current list of other IBM trademarks is available on the web at Apple is a registered trademark and QuickTime is a trademark of Apple, Inc. in the United States and/or other countries. Microsoft is a registered trademark and Windows Media is a trademark of Microsoft Corporation in the United States and/or other countries. RealAudio, RealNetworks, RealPlayer, RealSystem, RealText, and RealVideo are registered trademarks and RealMedia, RealProxy, and SureStream are trademarks of RealNetworks, Inc. in the United States and/or other countries. All other brands or products are trademarks or registered trademarks of their respective holders and should be treated as such. NetApp, Inc. is a licensee of the CompactFlash and CF Logo trademarks. NetApp, Inc. NetCache is certified RealSystem compatible.

13 13 How to send your comments You can help us to improve the quality of our documentation by sending us your feedback. Your feedback is important in helping us to provide the most accurate and high-quality information. If you have suggestions for improving this document, send us your comments by to To help us direct your comments to the correct division, include in the subject line the product name, version, and operating system. You can also contact us in the following ways: NetApp, Inc., 495 East Java Drive, Sunnyvale, CA U.S. Telephone: +1 (408) Fax: +1 (408) Support telephone: +1 (888)