Technical Data Sheet Page 1 of 5

Transcription

1 Technical ata Sheet Page of Ultra-ilter ilter with conometer/ conomizer and pneumatic/ electronic drain resp. plug for application of different types for the industrial processing of compressed air and gases. Product description: The filters Ultra-ilter are intended for the processing of compressed air or other gases in different areas of applications. The intelligent overall concept of the filter unites the following characteristics: high performance effiency compactness easy of use flexibility safety Validated performance data acc. to SO 00- for reliable achievement of compressed air quality suitable to the application acc. to SO 87-. esides energy cost savings by the filter design, the use of the conomizer offers further saving achievements through timely replacement of the used filter s. The most costeffective replacement time for the filter is calculated and Ls then signal that the "filter exchange" is neccessary. Version Superplus With 9 sizes the Ultra-ilter covers the performance range from to 00 m³/h flow rate and hence conventional compressor capacities between and 0 KW. ilter combination with adapter Three versions are available: Standard (type with float condensate drain and conometer / with with plug, without conometer). Plus (float condensate drain and conomizer / with with plug and conomizer). Superplus (level-controlled condensate drain UM-T and conomizer). selection of appropriate filter grades by filter types S, M, V,, P, ensure that the right product for the filtration task is always available to the user. The filter housing design allows an easy replacement of the filter. The filter bowl is rotated slightly via a bayonet lock and can be removed together with the filter. or this a installation height of only a few centimetres of ground clearence is neccessary. Technical alterations reserved (R0/ 008/0/08) onaldson iltration eutschland mb ndustrial iltration Solutions üssingstraße -78 aan Telefon +9/9/9-0 Telefax +9/9/9-00

2 Powe r Service Technical ata Sheet Page of Ultra-ilter Technical ata eatures: Validated performance data acc. to SO 00- ntelligent overall concept low-optimised filter housing and filter design ayonet fixing between filter head and filter bowl; can be removed together with filter bowl; filter head with integrated differential pressure indicator can be rotated Little installation height for the filter exchange, differential pressure indicator integrated in filter head hanging the coding clip inside the filter cover allows the filter to be rotated and thus change the flow direction ilter cannot be opened under pressure due to bayonet lock ilter housings iersion-laquererd on the inside and outside surface enefits: Reliable achievement of compressed air quality acc. to SO 87- low range, filtration grades, effiencies and available options perfectly meet requirements of industrial air purification Low pressure losses, thereby saving of energy costs asy to use construction - simplified filter replacement; simple installation and assembly ompact, space-saving construction - installation within smallest space possible igh flexibility - filters can be either used as coalescense filters or particulate filters igh safety during operation nsures long-term corrosion protection, in particulary against aggressive condensates Options: conometer conomizer K ½ / UM-P UM-T UZ S Wall bracket onnection adapter ilter s Mechanical differential pressure indicator ifferential pressure indicator for the determination of the most economical time for replacement of the filter ; Possibility of remote data transmission loat drain, pneumatically lectronic level-controlled condensate drain without compressed air losses Time-controlled condensate drain Plug istance to the wall gradelessly adjustable (except -00) ntelligent adapter solution for filter combination V / M / S (coalescense filter) P / (Pre-filter / particulate filter) (activated carbon filter) Ultra-ilter - S 00 Z U M S V P Z = conomizer U = UM-T0 SP / T P-filter Particle filter -filter Particulate filter -filter ctivated carbon filter V-filter oalescense filter M-filter oalescense filter S-filter oalescense filter nitial differential pressure : 0, bar fficiency : 00% related to µm nitial differential pressure : 0, bar fficiency : 00% related to µm nitial differential pressure : 0, bar Residual oil content : 0,00 mg/m³ nitial differential pressure : 0, bar Residual oil content: < 0, mg/m³ nitial differential pressure : 0, bar Residual oil content : < 0,0 mg/m³ nitial differential pressure : 0, bar Residual oil content : < 0,0 mg/m³ M = conometer P = Plate K = UM-P / K / T = UZ related to nominal performance at 7 bar, dry condition related to a inlet concentration of mg/m³ when upstream connected a M- or S-filter S = Plug

3 Technical ata Sheet Page of Ultra-ilter Standard ( 00 MK - 00 MK) Pos. Pcs. escription ilter head Lower housing bowl conometer nternal automatic drain K / 00 xternal automatic drain UM-P ilter housing conometer luminium die cast loat drain / aluminium mold cast bar.9 bar + / + 00 lassification acc. to 97 / / rt., par at. low rate* / / / / / / / / / / / / / / 7 90 * Nominal flow at 7 bar g, related to bar abs. and 0 ** without filter

4 Technical ata Sheet Page of Ultra-ilter Plus ( 00 ZK - 00 ZK) Pos. Pcs. escription ilter head Lower housing bowl conomizer nternal automatic drain K / xternal automatic drain UM-P ilter housing conomizer luminium die cast loat drain / aluminium mold cast bar.9 bar + / + 00 lassification acc. to 97 / / rt., par at. low rate* / / / / / / / / / / / / / / 7 90 * Nominal flow at 7 bar g, related to bar abs. and 0 ** without filter

5 Technical ata Sheet Page of Ultra-ilter Superplus ( 00 ZU - 00 ZU) Pos. Pcs. escription ilter head Lower housing bowl conomizer ondensate drain UM-T0 ondensate drain UM-T ilter housing conomizer luminium die cast loat drain luminium, glass fibre reinforced polymer bar,9 bar + / + lassification acc. to 97 / / rt., par at. low rate* * Nominal flow at 7 bar g, related to bar abs. and 0 ** without filter / / / / / / / / / / / / / / 7 90