Approved Products for Fire Protection Piping Systems

Transcription

1 R FIRE PROTECTION PRODUCTS Approved Products for Fire Protection Piping Systems This product submittal contains approvals of the following piping products for the below-listed projects: products are Underwriter s Laboratory () Listed and/or Factory Mutual System () Approved for fire protection systems, according to the services and pressure ratings listed on the following pages. Fire protection systems (automatic sprinklers, open sprinklers, and standpipe) are Listed and/or Approved. The following charts contain the latest and information available at the time of this publication. s are subject to changes and additions by the approval bodies. Use these charts for quick reference, and consult current copies of s Fire Protection Equipment Directory or s Guide for verification. Products are Listed and Approved with standard grade E (EPDM) green color-code gaskets. FireLock products are Listed/ Approved with grade E, type A violet color-code gaskets. Grade L (silicone) orange gaskets are available for selected products, and they are Listed and Approved. recommends grade L (silicone) gaskets for FIT products in dry fire protection applications subject to temperatures below 0 F. Additionally, the Listed, grade T (nitrile) orange color-code gaskets are available. Style 31 Couplings contain grade M FlushSeal gaskets. Style 341 Vic-Flange adapters contain grade M gaskets. Always reference the latest Gasket Selection Guide for specific, gasketservice recommendations. NOTE: This publication is for submittal purposes, and it includes listings of products for fire protection services. Additional literature is available, which includes application, installation, assembly, and other information. Contact for specific recommendations and other information. JOB/OWNER CONTRACTOR ENGINEER Spec. Sect. Para. System No. Location Submitted by Date Approved Date World Headquarters P.O. Box 31, Easton, PA Kesslersville Rd., Easton, PA PICK VIC FAX: 610/

2 FireLock TM Automatic Sprinklers Qty. Product Pub. No. Sys. No. (s) STANDARD COMMERCIAL Models V2703, V2704, V2707 and V2708 Orifice K5.6 Upright, and Models V2709 and V2710 Orifice K5.6 Horizontal and Horizontal Models V2703, V2704, V2707 and V2708 High Pressure (250 PSI) K5.6 Upright, and Models V2709 and V2710 High Pressure (250 PSI) K5.6 Horizontal and Horizontal Models V3401, V3402, V3405 and V3406 Large Orifice K8.0 Upright, and Models V3409 and V3410 Large Orifice K8.0 Horizontal and STORAGE Models V3403, V3404, V3407 and V3408 Extra Large Orifice (ELO) K11.2 (Specific Application) Upright and Models V2721, V2722, V2723 and V2724 Intermediate Level Orifice K5.6 Upright and Models V3417, V3418, V3419 and V3420 Intermediate Level Large Orifice K8.0 Upright and Model K1 (AS1451) Automatic Sprinkler Brand Early Supression Fast Response (ESFR),, K14.0 EXTENDED COVERAGE Models V3411 and V3412 Extended Coverage/ Hazard (ECLH) K11.2 and Models V3413 and V3414 Extended Coverage/ Hazard (ECLH) K14.0 and Models V3415 and V3416 Extended Coverage/ Hazard (ECLH) K8.0 Horizontal and SMALL ORIFICE Models V2701, V2702, V2705 and V2706 Hazard Small Orifice K2.8 Upright, and RESIDENTIAL Models V2714 and V2716 Residential K3.0/K3.5 and Model V2718 Residential K3.5 Horizontal and Horizontal Model V2802 Residential K4.2 Flush Qty. Product Pub. No. Sys. No. (s) DECORATIVE Models V3801 and V3802 Adjustable Concealed K5.6 ACCESSORIES Models V27, V34, V38 & V38-3 Sprinkler Wrenches Spare Sprinkler Cabinets TEMPERATURE RATINGS Temperature F/ C Part Nominal Maximum Identification Temperature Rating Ambient Temp. Allowed A C E F J K M Open Glass Bulb Color Orange Red Yellow Green Blue Mauve No Bulb N Fusible Metal *Not all temperatures are available with all styles of sprinklers. Consult individual submittal sheets for specific information. SPRINKLER FINISHES Abbrev. Part Ident. Finish Abbrev. Part Ident. Finish BR 1 Plain WX 5 Wax Coated CP 2 Chrome LD 6 Lead Coated BB 3 Bright Brass WL 7 Wax/Lead Coated WH 4 White Painted CSTM 8 Custom Painted JOB/OWNER CONTRACTOR ENGINEER Spec. Sect. Para. System No. Submitted by Approved Location Date Date

3 FireLock Products Quan. Product Pub. No. Sys. No. Quan. Product Pub. No. Sys. No. FIRELOCK FIRE PROTECTION PRODUCTS Style 005 FireLock Rigid Coupling FireLock Fittings Style 006 FireLock Cap Style 744 FireLock Flange Adapter No. 10-DR Drain Elbow No. 66 Vic -End End of Run Outlet Fitting IPS CARBON STEEL GROOVED COUPLINGS & FITTINGS Style 07 Zero-Flex Rigid Couplings Style 77 Flexible Coupling Style 75 Coupling Style 741 Vic -Flange Adapter Style 743 Vic-Flange Adapter Style 750 Reducing Coupling Style 72 Outlet Coupling Style 791 Vic-Boltless Coupling Style HP-70 Rigid Coupling HP-70ES Coupling ( PSI maximum working pressure) Grooved End Fittings FIRE PROTECTION GROOVED VALVES & ACCESSORIES Series 705W Fire Protection BFV Series 705W Fire Protection BFV with Tap Series 727 FireBall Valve Series 717 FireLock Check Valve Series 717R FireLock Riser Check Valve Series 722 Threaded Ball Valve Series 751 FireLock Alarm Check Valve Series 756 FireLock Dry Check Valve Series 758 FireLock Deluge Trim Series 758 FireLock Preaction Trim IPS CARBON STEEL PRESSFIT SYSTEM Pressfit Products IPS CARBON STEEL HOLE CUT PRODUCTS Style 920 & 920N Mechanical-T Mechanical-T Cross Assemblies Style 925 Snap-Let Outlet Style 923 Vic-Let Strapless Outlet GROOVED END ACCESSORIES Style 718/719 TestMaster Style 735 Fire Pump Test Meter Style 720G/720T TestMaster II CTS COPPER TUBING GROOVED PRODUCTS Style 606 Coupling Style 641 Vic-Flange Adapter Copper Fittings FIT PIPING SYSTEM FIT Piping System Products AWWA DUCTILE IRON GROOVED PRODUCTS Style 31 Coupling Style 307 Transition Coupling Style 341 Vic-Flange Adapter AWWA (Cast) Fittings IPS HDPE PLASTIC PLAIN END Style 995 Coupling for HDPE Style 997 Transition Coupling HDPE to Steel Style 994 Flange for HDPE IPS CARBON STEEL PLAIN END Style 99 Roust-A-Bout Couplings Style 90 Plainlock Couplings Plain End Fittings CPVC PRODUCTS CPVC Products JOB/OWNER CONTRACTOR ENGINEER Spec. Sect. Para. System No. Location Submitted by Date Approved Date

4 FireLock Automatic Sprinklers Sprinkler Head Type Model No. Deflector Type Response Category Orifice Hazard, Ordinary Hazard V27 Frame K5.6 V2703 Upright Request V2707 V2707 V2704 Upright V2708 V2708 Temp. Ratings F, F, F, Available Finishes Orifice Horizontal Hazard, Ordinary Hazard V27 Frame K5.6 Request V2709 Horizontal V2709 Hor. V2710 Horizontal V2710 Hor. F, F, s, C,,, C,,, C,,, C,,, C,,, C,,, C,,, C,,, C,,, C,, Orifice High Press. (250 PSI/1725 kpa) Hazard, Ordinary Hazard V27 Frame K5.6 V2703 Upright Upright Request V2707 V2707 V2704 Upright V2708 V2708 F, F, F, A 1, 2, 3, 4 1, 2, 3, 4 1, 2, 3, 4 1, 2, 3, 4 1,2,3,4,8, C 1,2,3,4,8, C 1,2,3,4,8, C 1,2,3,4,8 1,2,3,4,8 1,2,3,4,8, C,, C,, C, Orifice - High Pres.(250 PSI/1725 kpa) - Hor. Side. - Hazard, Ordinary Hazard V27 Frame K5.6 Request V2709 Horizontal V2709 Hor. V2710 Horizontal V2710 Hor. F, F, F, J, K F, J, K Large Orifice Commercial Hazard, Ordinary Hazard, Storage V34 Frame K8.0 V3401 Upright Request V3405 V3405 V3402 Upright V3406 V3406 F, F, F, 1,2,3,4,8 1,2,3,4,8 1,2,3,4,8 1,2,3,4,8 Large Orifice Commercial Hor. Hazard, Ordinary Hazard V34 Frame K8.0 Request V3409 V3409 V3410 V3410 Horizontal Hor. Horizontal Hor., C,, C,, C,, C,, C,,, C,,, C,,, C,,, C,,, C,, F,, C, F,, C,, C,, C, TEMPERATURE RATINGS Temperature F/ C Part Identification Nominal Temperature Rating Maximum Ambient Temp. Allowed Glass Bulb Color A Orange C Red E Yellow F Green J Blue K Mauve M Open No Bulb N Fusible Metal *Not all temperatures are available with all styles of sprinklers. Consult individual submittal sheets for specific information. SPRINKLER FINISHES Abbrev. Part Ident. Finish Abbrev. Part Ident. Finish BR 1 Plain CSTM 8 Custom Painted CP 2 Chrome WX 5 Wax Coated BB 3 Bright Brass LD 6 Lead Coated WH 4 White Painted WL 7 Wax/Lead Coated AUTOMATIC SPRINKLER NOTES *Contact for wax, lead, and wax-over-lead coatings. 1 MEA Approved for V27 and V E. 2 CS for V27 and V : Approved for light hazard only. 4 Not all temperature ratings or finishes are approved or listed. Refer to current product submittals for specific information. V27 and V34 units are MEA (#62-99-E) and CS (# :112) Listed. 5 Recognized by as standard response only. 6 K3.0 for room sizes up to 16' x 16' (4,9 x 4,9 m); K3.5 for room sizes up to 18' x 18' (5,5 x 5,5 m) and 20' x 20' (6,1 x 6,1 m). 7 Horizontal K3.5 for room sizes up to 16' x 16' (4,9 x 4,9 m). 8 Cover A is rated for 135 F (57 C) for use with standard or quick response sprinklers rated 135 F and 155 F (57 C and 68 C). Cover D is rated for 165 F (74 C) for use with standard or quick response sprinklers rated 175 F and 200 F (79 C and 93 C). A proper temperature rated cover must be used with the correct sprinkler rating.

5 FireLock Automatic Sprinklers Sprinkler Head Type Model No. Deflector Type Response Category Temp. Ratings (ELO) Extra Large Orifice Storage All Hazard (Specific Appl.) V34 Frame K11.2 V3407 Request Intermediate Level Rack Storage V3403 Upright V3408 V3404 Upright V27 Frame K5.6 V2723 Upright Request V2721 Upright V2724 V2722 Upright Large Orifice Intermediate Level Rack Storage V34 Frame K8.0 V3419 Request V3417 Upright V3420 V3418 Upright Large Orifice Intermediate Level Rack Storage V34 Frame K14.0, M, M F, J, M F, J, M F J, M F J, M Available Finishes 1,5,6,7 1,5,6,7 1,6 1,6 s, C,,, C,,, C,,, C,, A 1, C, 4 1, C, 4 1, C, 4 1, C, 4 1, C, 4 1, C, 4 1, C, 4 1, C, 4 TEMPERATURE RATINGS Temperature F/ C Part Identification Nominal Temperature Rating Maximum Ambient Temp. Allowed Glass Bulb Color A Orange C Red E Yellow F Green J Blue K Mauve M Open No Bulb N Fusible Metal *Not all temperatures are available with all styles of sprinklers. Consult individual submittal sheets for specific information. SPRINKLER FINISHES Abbrev. Part Ident. Finish Abbrev. Part Ident. Finish BR 1 Plain CSTM 8 Custom Painted CP 2 Chrome WX 5 Wax Coated BB 3 Bright Brass LD 6 Lead Coated WH 4 White Painted WL 7 Wax/Lead Coated Request AS1451 C, F 1, C, 9 (ECLH) Extended Coverage Extra Large Orifice Hazard V34 Frame K11.2 V3411 Request V3411 V3412 V3412 F, M F, M A, C, E, F (ECLH) Extended Coverage Very Extra Large Orifice Hazard V34 Frame K14.0 V3413 Request V3413 1,2,3,4,8, C, 4 1,2,3,4,8, C, 4 1,2,3,4,8, C, 4 F 1,2,3,4,8, C, 4 V3414 V3414 F, M F, M A, C, E, F (ECLH) Horizontal and Horizontal V34 Frame K8.0 V3415 ECLH HSW Request V3415 ECLH HSW 1,2,3,4,8, C, 4 1,2,3,4,8, C, 4 1,2,3,4,8, C, 4 F 1,2,3,4,8, C, 4 V3416 ECLH HSW V3416 ECLH HSW A, C, E, F A, C, E, F A, C, E, F 1,2,3,4,8, C 4 1,2,3,4,8, C 4 1,2,3,4,8, C 4 F 1,2,3,4,8, C 4 AUTOMATIC SPRINKLER NOTES 1 MEA Approved for V27 and V E. 2 CS for V27 and V : Approved for light hazard only. 4 Not all temperature ratings or finishes are approved or listed. Refer to current product submittals for specific information. V27 and V34 units are MEA (#62-99-E) and CFSM (# :112) Listed. 5 Recognized by as standard response only. 6 K3.0 for room sizes up to 16' x 16' (4,9 x 4,9 m); K3.5 sizes up to 18' x 18' (5,5 x 5,5 m) and 20' x 20' (6,1 x 6,1 m). 7 Horizontal K3.5 for room sizes up to 16' x 16' (4,9 x 4,9 m). 8 Cover A is rated for 135 F (57 C) for use with standard or quick response sprinklers rated 135 F and 155 F (57 C and 68 C). Cover D is rated for 165 F (74 C) for use with standard or quick response sprinklers rated 175 F and 200 F (79 C and 93 C). A proper temperature rated cover must be used with the correct sprinkler rating. 9 Sprinkler head is manufactured by Automatic Sprinkler Fire Protection Equipment.

6 FireLock Automatic Sprinklers Sprinkler Head Type Model No. Deflector Type Response Category Temp. Ratings Available Finishes s A Small Orifice Hazard V27 Frame K2.8 V2705 F,, C V2701 Upright F,, C, V2705 F,, C V2706, C V2702 Upright Upright, C, Request V2706, C Residential V27 Frame K3.0/K3.5 Request V28 Frame K4.2 Flush Request V2714 C V2714 V2716 C V2716 V2802 Residential Horizontal V27 Frame K3.5 Request V2718 V2718 Flush Horizontal Hor. 1,2,3, 4,8, C, 6 C 1,2,3,4,8, C, 6 1,2,3, 4,8, C, 6 C 1,2,3,4,8, C, 6 N 2,4, C Decorative Concealed Ordinary Hazard V38 Frame K5.6 Request V3801 V3802 Concealed Pend. and Cover Plate Concealed Pend. and Cover Plate Replacement Cover Plate only C 1,2,3,4,8, C, 7 C 1,2,3,4,8, C, 7 C, F 2,3,4,8, C C, F 2,3,4,8, C,, 5 / A, D* (see note 8) 2,3,4,8, C,, 8 TEMPERATURE RATINGS Temperature F/ C Part Identification Nominal Temperature Rating Maximum Ambient Temp. Allowed Glass Bulb Color A Orange C Red E Yellow F Green J Blue K Mauve M Open No Bulb N Fusible Metal *Not all temperatures are available with all styles of sprinklers. Consult individual submittal sheets for specific information. SPRINKLER FINISHES Abbrev. Part Ident. Finish Abbrev. Part Ident. Finish BR 1 Plain CSTM 8 Custom Painted CP 2 Chrome WX 5 Wax Coated BB 3 Bright Brass LD 6 Lead Coated WH 4 White Painted WL 7 Wax/Lead Coated AUTOMATIC SPRINKLER NOTES *Contact for wax, lead, and wax-over-lead coatings. 1 MEA Approved for V27 and V E. 2 CS for V27 and V : Approved for light hazard only. 4 Not all temperature ratings are approved or listed. Refer to current product submittals for specific information. V27 and V34 units are MEA (#62-99-E) and CFSM (# :112) Listed. 5 Recognized by as standard response only. 6 K3.0 for room sizes up to 16' x 16' (4,9 x 4,9 m); K3.5 sizes up to 18' x 18' (5,5 x 5,5 m) and 20' x 20' (6,1 x 6,1 m). 7 Horizontal K3.5 for room sizes up to 16' x 16' (4,9 x 4,9 m). 8 Cover A is rated for 135 F (57 C) for use with standard or quick response sprinklers rated 135 F and 155 F (57 C and 68 C). Cover D is rated for 165 F (74 C) for use with standard or quick response sprinklers rated 175 F and 200 F (79 C and 93 C). A proper temperature rated cover must be used with the correct sprinkler rating.

7 FireLock Devices and Valves Wall Wall FIRELOCK ACTUATED VALVES Series 751 Alarm Check,, MEA, CS 1¹ ₂ - 6 1,5,8,10 GROOVED END VALVES Series 705W Butterfly Valve,, MEA, CS 2¹ ₂, 3, 4, 5, 6, 8, 10, 12 3,8,11,15, ,5,8,10 Request Series 756 Dry Check Request Series 705W Butterfly Valve with Tap,, MEA, CS 1¹ ₂ - 6 2,6,, MEA, CS 2¹ ₂, 3, 4, 5, 6, 8, 10, 12 3,8,11,15 Request Series 758 Deluge Trim,, MEA, CS 1¹ ₂ - 6 2,7 Request Series 727 FireBall Valve,, BSA, CS 2, 2¹ ₂, 3 4,9, ,7 Request Series 758 Preaction Trim Request Series 717 FireLock Check Valve, MEA 2¹ ₂, 3, 4, 5, 5¹ ₂, 6, 6¹ ₂, 8, 10, ,13,14,, MEA, CS 1¹ ₂ - 6 2,7 4, 5, 6, 8, 10, ,13 Request Request Series 717R FireLock Riser Valve, MEA 2¹ ₂, 3, 4, 5, 5¹ ₂, 6, 6¹ ₂, 8, 10, ,13,14 Series 722 Ball Valve (Thd.) ¹ ₂ N/A 4, 5, 6, 8, 10, ,13 ¹ ₂, ³ ₄ N/A N/A Request Request MEA Approved # E 2 MEA Approved # E 3 MEA Approved # E 4 BSA Approved # CS # :109 6 CS # :111 7 CS # :110 VALVES NOTES 8 CS # :103 9 CS # : Approved for vertical or horizontal installation. 11 Indoor/Outdoor use weatherproof operator. 12 Listed/Approved for single check and anti-water hammer service; for horizontal or vertical installation. 13 Pressure rating of Series 717R is based on the rating of Riser Check Kit when equipped for this service. 14 MEA Approved # E, Vol. 1 to CS # :113.

8 Couplings and Fittings Size Range Wall Size Range Wall FIRELOCK COUPLINGS AND FITTINGS Style 005 Rigid FireLock Coupling 1¹ ₄ - 4 3, 6, 7, 12, 16 13, 17, 30 STANDARD COUPLINGS AND FITTINGS Style 07 Zero-Flex Rigid Coupling ,6,7,11,12,13,14,15,16,17 11,12,13,14,15 12,13,14,15 12,13, Request FireLock Fittings 1¹ ₄ , 2, 3, 4, 5, 6, 7, 17, 30 Request Style 77 Flexible Coupling 1¹ ₂ ³ ₄ ³ ₄ ,2A,3,4,5,6,7,24 5,10 5,10 5,10 12,14,15 3,6,7,12,13,16,17,18, Request Style 744 FireLock Vic-Flange Adapter 2-4 1, Request Style 75 Flexible Coupling ,2A,3,4,5,6,7,10, ,6,7,11,12,13, 14,15,16,17,18 12,13, Request ¹ ₂ - 8 1¹ ₂ - 4 1,2A,3,4,5,6,7,26 5 5,10 Request Style 006 FireLock End Caps 1¹ ₄ - 4 Grooved Fittings ³ ₄ ³ ₄ ,14, ³ ₄ ,2A,5,27 Request ¹ ₄ - 4 1, 2 Request Style 741 Vic-Flange Refer to notes on the next page ,2A,5,10,21 Request Refer to notes on the next page.

9 Couplings and Fittings Wall STANDARD COUPLINGS AND FITTINGS Style 743 Vic-Flange 2¹ ₂ - 12 Wall STANDARD COUPLINGS AND FITTINGS No. 10-DR Drain Elbow 2¹ ₂ ¹ ₂ ,2A 2¹ ₂ - 6 1,2A,5 Request Style 72 Outlet Coupling 1¹ ₂ ¹ ₂ ¹ ₂ Request No. 66 Vic -End End of Run Sprinkler Outlet 2 ¹ ₂, ³ ₄, 1 2¹ ₂ ¹ ₂, ³ ₄, 1 Request Style 750 Reducing Coupling Request Style HP-70 Rigid Coupling Request Style HP-70ES With Grade E Fire-R Request Style 791 Vic-Boltless Flexible Coupling Request ¹ ₂ ¹ ₂ ¹ ₂ ,2A,5,22 5,22 2 1¹ ₂ ,13,20 2 1¹ ₂ ¹ ₂ ,2A,3,5,21,23 5,21,23 12,13,14,15 12, ,2A,5,23 5, ,13 12,13 12,13 5,10 5,10 5,10 Request ¹ ₂, ³ ₄, 1 2¹ ₂ ¹ ₂, ³ ₄, 1 1,2A COUPLINGS AND FITTINGS NOTES 1 MEA Approved # E 2 CS # :104 2A CS # :001 3 Listed and Approved at 175 on schedule 5 and Eddy Flow pipe manufactured by Bull Moose Tube Company. Listed and Approved at 175 and, respectively, on schedule 5 pipe manufactured by Wheatland Tube and IDOD Tube Companies. 4 Style 07, 75, and 77 are Approved in sizes 1-2" at. Style 005 is Approved in 2" sizes at 175 on Allied XL pipe. 5 Approved for dry pipe systems down to -40 F with standard gasket, ( recommends FlushSeal or silicone gasket with coupling Style 77, 07, 005, 75, 791 and HP-70). 6 Listed/ Approved in 2¹ ₂ and 3" sizes on American Tube Dyna-Flow pipe at for Styles 07, 75, and 77; 175 for Style Styles 07, 77, 920, and 920N are Listed and Approved in 2¹ ₂ - 4" sizes at. Style 75 3" size is Listed at and Style 75 4" size is Listed and Approved at. Style 005 is Listed and Approved in 1¹ ₄ - 4" sizes at 175 on American Tube Dyna-Flow pipe. 8 Listed and Approved in sizes 1-2" on American Tube Dyna-Flow pipe at 175. Style 925 Listed and Approved on American Tube Dyna-Flow pipe at 175 in sizes 1¹ ₄ - 2¹ ₂". 9 Listed and Approved on Allied XL and XL -II at Minimum schedule pipe to be joined: 6" or smaller/sch. 10; 8" or larger/0.188" wall. 11 accepted for -200 fire extinguishing systems. has indicated that Listed rubber gasketed fittings (couplings and fittings rated to minimum) that are not under continuous exposure to -200 and are downstream of the pressure reducing device can be utilized in -200 fixed extinguishing systems. 12 Listed for dry pipe systems down to 40 F with standard gasket ( recommends FlushSeal or silicone gasket with coupling Styles 77, 07, 005, 75, 791, and HP-70). 13 Lt. Wall shall be of the following minimum wall thickness: 1-12"/sch Listed for carbon dioxide systems, low pressure (-FYJR) for distribution piping downstream of the master valve only: S/77, ³ ₄ - 8"; S/75, 1¹ ₂ - 4"; S/07, 1¹ ₂ - 8"; S/HP-70, 2-8"; on sch. 40 pipe and standard grooved fittings ³ ₄ - 8". 15 Listed for halogenated agent systems, Halon 1301 (-GLER) extinguishing systems units, 360 for distribution piping only: S/77, ³ ₄ - 8"; S/75, 1¹ ₂ - 4"; S/07, 1¹ ₂ - 8"; S/HP-70, 2-8"; on sch. 40 pipe and standard grooved fittings ³ ₄ - 8". 16 Style 75, 07, 77 Listed on Allied XL pipe in sizes 1-3" at. Style 005 Listed Listed and Approved in sizes 1¹ ₄ - 2" on Central Sprinkler TL, C7 and Central Thread to. 18 1¹ ₄" Style 77 and Style 75 in sizes 1¹ ₂ - 6" are Listed for use on Berger Industries sch. 5 roll grooved pipe, working pressures: 1¹ ₄ - 5" and 6" Style 77 Listed on pipe in sizes 1-2" at 20 Style 07, 75, 77 in sizes 1-2"; Style 750 in 2 1", 2 1¹ ₂" sizes at and Style 005 at 175 on SL pipe. 21 Cut groove, sch. 40, 6" and smaller; sch. 30, 8" and larger. 22 Lt. wall roll grooved based on sch. 10 pipe. 23 Minimum schedule pipe to be joined; 3¹ ₂" or smaller/sch. 10; 4" or larger/0.188" wall. 24 Style 07 metric equivalent sizes 3 O.D., 4¹ ₄, 5¹ ₄, 5¹ ₂, 6¹ ₄ and 6¹ ₂" Approved to 175 on standard and lightwall pipe. (See note 10.22) 25 Style 77 metric equivalent sizes 3 O.D., 4¹ ₄, 5¹ ₄, 5¹ ₂, and 6¹ ₄" Approved to 175 (6¹ ₂" 450 ) on standard and lightwall pipe. (See note 10.22) 26 Style 75 metric equivalent sizes 4¹ ₄, 5¹ ₄, 5¹ ₂, 6 O.D., 6¹ ₄, and 6¹ ₂" Approved to on standard and lightwall pipe. (See note 10.22) 27 90, 45 elbow and tee metric equivalent sizes 3 O.D., 4¹ ₄, 5¹ ₄, 5¹ ₂, 6¹ ₄ and 6¹ ₂" Approved to 175 on standard and lightwall pipe. 6¹ ₂" No. 60 end cap Approved to 175. (See note F) 28 Style 005 metric equivalent sizes 3 O.D., 4¹ ₄, 5¹ ₄, 5¹ ₂, 6¹ ₄, 6¹ ₂ and 8" Approved to 175 on standard and lightwall pipe. (See note 10.22) 29 Listed and Approved with HP-70ES with Grade E Fire-R gaskets. 30 Listed and Approved for use on Fire-Line Flow (FLF) and Fire-Line Threadable (FLT) steel sprinkler pipe (up to 4 inches and up to ) manufactured by Western International Forest Products.

10 CPVC Products Request CPVC PRODUCTS Coupling CPVC PRODUCTS Crosses / ³ ₄ ,2 / ³ ₄ ,2 Elbows Flanges / ³ ₄ ,2 / ³ ₄ ,2 Sprinkler Head Elbow Unions / ³ ₄ ,2 / ³ ₄ ,2 Tee Reducer Bushing / ³ ₄ ,2 / 1 ³ ₄ - 2 1¹ ₂ 175 1,2 Sprinkler Head Tee Cap / ³ ₄ ,2 / ³ ₄ ,2 Reducer Coupling Female Threaded Adapters / ³ ₄ ,2 / ³ ₄ ,2 Grooved Coupling Adapter / ³ ₄ ,2 CPVC PRODUCTS NOTES 1 Please refer to the latest Installation and Maintenance (I-800) manual for cross usage with other manufacturer s CPVC products. 2 Pressure rating is based on a maximum temperature of +150 F (+66 C).

11 CPVC Products Request CPVC PRODUCTS Spigot Female Adapters CPVC PRODUCTS No. 890 One-hole Wrap Around Strap / ³ ₄ ,2 / ³ ₄ - 2 Female Sprinkler Head Adapters / ³ ₄ ¹ ₂ - 1 ³ ₄ 175 1,2 No. 891 Two-hole Strap / ³ ₄ - 2 Spigot Sprinkler Head Adapters / ³ ₄ ¹ ₂ - 1 ¹ ₂ 175 1,2 No. 892 Two-hole 90 Side Mount Strap / ³ ₄ - 2 Adjustable Sprinkler Head Adapters / ³ ₄ ¹ ₂ - 1 ¹ ₂ 175 1,2 No. 894 Surge Clip / ³ ₄ - 2 No. 893 Swivel Ring Hanger / ³ ₄ - 2 CPVC PRODUCTS NOTES 1 Please refer to the latest Installation and Maintenance (I-800) manual for cross usage with other manufacturer s CPVC products. 2 Pressure rating is based on a maximum temperature of +150 F (+66 C). No. 895 Universal Beam Clamp with Locknut / ³ ₄ - 2

12 Other Products Wall Wall HOLE CUT PRODUCTS Style 920/920N Mechanical-T Outlet 3 1¹ ₄ thru 6 2¹ ₂ & 8 2¹ ₂ 1,2,3,4.5 PRESSFIT SYSTEM Style 505 Coupling 3 1¹ ₄ thru 6 2¹ ₂ & 8 2¹ ₂ 2,3,4,5,6, C,, MEA, CS ³ ₄ - 2 1, 2 6 3, 6 4 & Request Request , 6 4, 8 3 & ,6 Style 506 Slip Coupling Style 920/920N Cross Assemblies 3 1¹ ₄ thru 6 2¹ ₂ & 8 2¹ ₂ 3 1¹ ₄ thru 6 2¹ ₂ & 8 2¹ ₂ 1,2,3,4.5 2,3,4,5,6, C,, MEA, CS ³ ₄ - 2 1, 2 6 3, 6 4 & Request Pressfit Fittings Request Style 923 Vic-Let 6 3, 6 4, 8 3 & ,6, C,, MEA, CS ³ ₄ - 2 1, ¹ ₂, ³ ₄ 10 & 12 ¹ ₂, ³ ₄ Request Request Style 925 Snap-Let Request ¹ ₄ ¹ ₂ thru 2¹ ₂ 1 1¹ ₄ ¹ ₂ thru 2¹ ₂ ,7,8, 9,10 3,6,7,8, 9.10 PRESSFIT SYSTEM NOTES All of the above products are Listed for dry pipe systems down to -40 F (-40 C). All of the above products are MEA Approved # M and CS Listed # : Listed and Approved at 175 (1205 kpa) on Schedule 5 and Eddy Flow pipe manufactured by Bull Moose Tube Company. Listed and Approved at 175 (1205 kpa) on Schedule 5 pipe manufactured by Wheatland Tube Companies. 2 Listed and Approved at 175 (1205 kpa) on Schedule 5 pipe manufactured by ID/OD System Ga1-05 for wet/dry piping systems. NOTE: does not approve the use of any other pipe on dry systems. HOLE CUT PRODUCTS NOTES 1 MEA Approved # M 2 CS # :001 3 Listed for dry pipe systems down to 40 F with standard gasket ( recommends Flush- Seal or silicone gasket with coupling Styles 77, 07, 005, 75, 791 and HP-70). 4 Styles 07, 77, 920, and 921 are Listed and Approved in 2¹ ₂ - 4" sizes at. Style 75 3" size is Listed at and Style 75 4" size is Listed and Approved at. Style 005 is Listed and Approved in 1¹ ₄ - 4" sizes at 175 on American Tube Dyna-Flow pipe. 5 Minimum schedule pipe to be joined: sch Approved for dry pipe systems down to 40 F with standard gasket, ( recommends FlushSeal or silicone gasket with coupling Style 77, 07, 005, 75, 791 and HP-70). 7 Listed and Approved at 175 on Schedule 5 pipe manufactured by Bull Moose Tube and Wheatland Tube Companies. 8 Listed and Approved in sizes 1-2" on American Tube Dyna-Flow pipe at 175. Style 925 Listed and Approved on American Tube Dyna-Flow pipe at 175 in sizes 1¹ ₄ - 2¹ ₂". 9 Listed and Approved on Wheatland Tube, Mega-Flow, Mega-, Mega-Thread, Mega- 10 and Mega-40 pipe manufactured by Weatland Tube Companies. 10 Listed and Approved on Central &, Central Thread pipe manufactured by Central Grooved Piping Products.

13 Other Products Wall Wall ACCESSORIES Style 735 Fire Pump Test Meter FIT PRODUCTS Styles 96, 961, 960, 963, 966 2¹ ₂ - 12-L 2¹ ₂ - 12-S 175 1,2, ,2,3,4,6,7,9 Request Request Style 969 Style 718 TestMaster Alarm Test Module Threaded 1¹ ₄ N/A 1,2, 1¹ ₄ 1 ¹ ₂ thru 2 1¹ ₂ ,2,3,4,6,7,9 Request Style 929 1¹ ₄ N/A 1,2 Request Style 719 TestMaster Alarm Test Module FIT 1¹ ₄ ,2 Request 13.01, 3 1¹ ₄ thru ,6,7 Style 929 Cross Request Style 720G TestMaster II Test and Drain Device 1¹ ₄ ,2,3 Request 13.01, 2 1¹ ₄ thru 2¹ ₂ 1¹ ₂ ,7 Request Style 720T TestMaster II Test and Drain Device, 1¹ ₄ - 2 3, 1-2 FIT PRODUCTS NOTES 1 Listed/ Approved for use on schedule 10 and 40 steel pipe prepared in accordance with specifications. 2 Listed/ Approved for use with Wheatland WLS, Mega Flow, Mega10, Mega 40, and Mega-Lite type pipes prepared in accordance with specifications. 3 Listed/ Approved for use with Central TL and Central Thread type pipes prepared in accordance with specifications. 4 Listed/ Approved for use with Allied Tube and Conduit SF, Super XL, Super 40, and XL type pipes prepared in accordance with specifications. 5 Listed/ Approved for use with American Tube and Co. BLT, DF, and DT type pipes prepared in accordance with specifications. 6 Listed/ Approved for use with Bull Moose Eddy-Lite and Eddy-Thread type pipes prepared in accordance with specifications. 7 MEA Approved under BSA # Listed and Approved for use on Fire-Line Flow (FLF) and Fire-Line Threadable (FLT) steel sprinkler pipe manufactured by Western International Forest Products. 9 Listed for use with Bull Moose Eddy Fast pipe in accordance with specifications. Request ACCESSORIES NOTES 1 MEA (BSA) Approved # Minimum schedule pipe to be joined; 3¹ ₂" or smaller/sch. 10; 4" or larger/0.188" wall. 3 recommends optional grade L silicone gaskets for fire protection dry systems and all systems operating below 0 F.

14 Other Products Wall (Sch. 40) Work. Press. Wall Type K & L Copper Tube PLAIN END Style 99 Roust-A-Bout Coupling GROOVED END COPPER Style 606 Copper Coupling ,2,3,4 /C 2¹ ₂ ,2,4 Request Style 90 Plainlock Coupling Request Style 641 Copper Flange ,2,3,4 /C 2¹ ₂ ,2,4 Request Plain End Fittings Request Copper Fittings /C 2¹ ₂ ,3 Request Request PLAIN END NOTES 1 MEA Approved (BSA) # SM 2 CS # :001 3 Listed for Schedule 40 steel pipe only. 4 Nuts must be tightened to published torque specifications. GROOVED END COPPER NOTES 1 MEA Approved # E 2 CS # :108 3 CS # :107 4 Roll grooving tools must be equipped only with rolls designed for grooving copper tube (color coded copper). plain end couplings are Listed for use on standard weight steel pipe (schedule 40). They are not intended for use on plastic pipe or brittle pipe, such as cast iron. Nor are they intended for use on pipe with a surface hardness greater than 150 Brinell. (Style 90 should not be used on schedule 80 or heavier pipe.) It should be noted that Style 99 Roust-A-Bout couplings can be used with No. 10P and No. 11P elbows in sizes 6" and above only. (NOTE: 90 and 45 plain end elbows from 1-5" may be used with Style 90 Plainlock couplings only. If using Style 99 Roust-A-Bout couplings, specify special fittings, with a minimum tangent length, which are required for proper assembly (contact for details). grooved end fittings must not be used with plain end couplings.

15 Underground Products Wall UNDERGROUND DUCTILE (AWWA) Style 31 Coupling UNDERGROUND HDPE PLASTIC Style 994 HDPE Flange Adapter 4-8 1,2,3 Request Style 307 Coupling Request Style 995 HDPE Coupling ,2,3 Request Style 341 Vic-Flange Adapter Request Style 997 HDPE-to-Steel Transition Coupling ,2, Request Request Fittings Request UNDERGROUND HDPE PLASTIC 1 Approved for use with the following Approved HDPE pipe: a. KWH Class 150 and 200 b. Plexco EHMW Class 150 and 200, Blue Stripe Class 150 and 200, Red Stripe Class 150 and 200 c. Driscopipe Series 1000, Class 150, and Joint rated to working pressure of pipe. 3 Approved for underground use only. UNDERGROUND DUCTILE (AWWA) 1 For joining ductile iron pipe only, in underground mains. 2 The Style 307 coupling is intended for connecting cut or roll-grooved schedule 40 or roll-grooved schedule 10 steel pipe to radius cut-grooved class 53 ductile iron pipe.