FEDERAL-MOGUL CORPORATION EDI SPECIFICATIONS 856 SHIP NOTICE ANSI X.12 VERSION

Transcription

1 FEDERAL-MOGUL CORPORATION EDI SPECIFICATIONS 856 SHIP NOTICE ANSI X.12 VERSION JANUARY 26, 2014 Page 1

2 Change Log Sl. No. Description Revision No. Date 1. Initial Power Train Guide lines created from VCS Guide lines 1.0 Oct, Additional Changes on the following segments 1.1 Jan, 2014 i. BSN-BSN Replace Cancel ii. DTM Segment is added for 017 Estimated Delivery Date iii. MEA,TD1,TD5,TD3 are the added under HL-Shipment iv. REF is added under the HL- Shipment, for qualifier "AW" "2I" "DK" v. LIN- LIN08, LIN09, LIN10, LIN11, LIN12, LIN13, LIN14, LIN15 are added for qualifiers BT, RY, EC and?? under the HL- ITEM level vi. SLN, MEA, CLD and REF (LS) are added under the HL- ITEM level. JANUARY 26, 2014 Page 2

3 Heading: Pos. Seg. Req. Loop Notes and No. ID Name Des. Max.Use Repeat Comments M 010 ST Transaction Set Header M 1 M 020 BSN Beginning Segment for Ship M 1 Notice 040 DTM Date/Time Reference O 10 Detail: Pos. Seg. Req. Loop Notes and No. ID Name Des. Max.Use Repeat Comments LOOP ID - HL M 010 HL Hierarchical Level M 1 c1 080 MEA Measurements O 40 M 110 TD1 Carrier Details (Quantity and M 20 Weight) M 120 TD5 Carrier Details (Routing M 12 Sequence/Transit Time) M 130 TD3 Carrier Details (Equipment) M 12 M 150 REF Reference Identification M >1 M N1 N2 N3 N4 LOOP ID - N1 200 Name Additional Name Information Address Information Geographical Location M O O O LOOP ID - HL M 010 HL Hierarchical Level M 1 M 020 LIN Item Identification M 1 M 030 SN1 Item Detail (Shipment) M 1 M 040 SLN Sub line Item Detail M PRF Purchase Order Reference O 1 M 080 MEA Measurements M 40 LOOP ID - CLD 200 M 170 CLD Load Detail M REF Reference Identification O 200 JANUARY 26, 2014 Page 3

4 ISA - Interchange Control Header Level: N/A Loop: 1 per interchange Purpose: To start and identify an interchange of one or more functional groups and Interchange-related control segments. Notes: Element separator use * (Hex value 2A) Sub-element separator use > (Hex value 3E) Segment terminator use ~ (Hex value 7E) The interchange control number value in ISA13 in this header must match The value in the same data element in the corresponding interchange control trailer in IEA02. ISA*00* *00* *01* Z *01* *140215*0119 *U*00401* *0*P*>~ ISA Authorization Information Qualifier M ID 2/2 Use "00" ISA Authorization Information M AN 10/10 Use ten spaces ISA Security Information Qualifier M ID 2/2 Use "00" for password ISA Security Information M AN 10/10 Mutually defined password ISA Interchange ID Qualifier M ID 2/2 Use "01" or "ZZ" or other applicable codes ISA Interchange Sender ID M ID 15/15 Duns number if ISA05="01". Left justify, space fill ISA Interchange ID Qualifier M ID 2/2 Use "01" or other applicable codes ISA Interchange Receiver ID M ID 15/15 DUNS number. Left justify, space fill ISA Interchange Date M DT 6/6 Date of creation JANUARY 26, 2014 Page 4

5 ISA Interchange Time M TM 4/4 Time of creation ISA Interchange Control Standards Identifier M ID 1/1 Use "U" for U.S. ISA Interchange Control Version Number M IA 5/5 Use "00401" ISA Interchange Control Number M N0 9/9 Sequential number starting and Incrementing by 1 for each subsequent ISA between sender and receiver. ISA Acknowledgment Requested M ID 1/1 Use "0" for no interchange level acknowledge requested. ISA Test Indicator M ID 1/1 Use "T" for test data or "P" for production data. ISA Sub-element Separator M AN 1/1 Use > (Hex 3E) JANUARY 26, 2014 Page 5

6 GS - Functional Group Header Level: N/A Loop: as required 1 per functional group Purpose: To indicate the beginning of a functional group and to provide control information. Notes: See the ASC X12 segment directory for rules and notes. Strict compliance and agreement on content by trading partners is required. GS*SH* Z* * *0119*1*X*004010~ GS Functional Identifier Code M ID 2/2 GS Application Sender's Code M ID 2/15 Use DUNS number GS Application Receiver's Code M ID 2/15 Use DUNS number GS04 29 Data Interchange Date M DT 8/8 Date created GS05 30 Data Interchange Time M TM 4/8 Time created GS06 28 Data Interchange Control Number M N0 1/9 Start with 1 and increment by 1 for each subsequent GS segment GS Responsible Agency Code M ID 1/2 Enter "X" for ASC X12 formats GS Version/Release/Industry ID Code M ID 1/12 Use "004010" for this version/release JANUARY 26, 2014 Page 6

7 ST - Interchange Control Header Level: 010 Loop: Purpose: To define the beginning of a document. The control number ST02 must match the value in SE02. ST*856*00001~ ST Transaction Set Identifier Code M ID 3/3 856 Advance Shipping Notification ST Transaction Set Control Number M N0 4/9 Must match SE02 JANUARY 26, 2014 Page 7

8 BSN - Beginning Segment for Ship Notice Position: 020 Level: Header Loop: N/A Purpose: To define the beginning of a document. BSN*00*437861* *0114~ BSN Transaction Set Purpose Code M ID 2/2 00 Original 01 Cancel Document 05 Replace BSN Shipment Identification Number M AN 2/30 Cannot be reused for 18 Month Period BSN ASN Creation Date M DT 8/8 Format: CCYYMMDD BSN ASN Creation time M TM 4/8 Format: HHMM JANUARY 26, 2014 Page 8

9 DTM - Ship Date/ Time Position: 040 Level: Header Loop: N/A Purpose: To define Ship Date and Time. ANSI X12 V DTM*011* *0000~ DTM Date/Time Qualifier M ID 3/3 011 Ship Date DTM In-transit Date M DT 8/8 Format: CCYYMMDD DTM In-transit Time M TM 4/8 Format: HHMM JANUARY 26, 2014 Page 9

10 DTM - Estimated Delivery Date Position: 040 Level: Header Loop: N/A Purpose: To define estimated Delivery Date and Time. DTM*017* *0000~ DTM Date / Time Qualifier M ID 3/3 017 Estimated Delivery DTM In-transit Date M DT 8/8 Format: CCYYMMDD DTM In-transit Time M TM 4/8 Format: HHMM JANUARY 26, 2014 Page 10

11 HL - Hierarchical Level - Shipment Position: 010 Level: Detail Loop: HL - Shipment Purpose: To define Hierarchical Level Shipment. HL*1**S~ HL Hierarchical ID No M AN 1/12 A unique number assigned by the sender to identify a particular data segment in a hierarchical structure 1 First Level HL Hierarchical Level Code M ID 1/1 Code defining the characteristic of a level in a hierarchical structure S Shipment JANUARY 26, 2014 Page 11

12 MEA - Measurements Position: 080 Level: Header Loop: HL - Shipment Usage: Optional Purpose: To define Weights and Volumes. ANSI X12 V MEA*PD*G*2.00*KG~ MEA Measurement Reference M ID 2/2 PD Physical Description MEA Measurement Qualifier M ID 1/3 G Gross Weight MEA Measurement Value M R 1/20 MEA04 C001 Composite Unit of Measurement M To identify Composite Unit of Measure C Unit or basis for Measurement Code M ID 2/2 Code specifying the unit in which value is being expressed, or manner in which a measurement has been taken. LB Pounds KG Kilograms JANUARY 26, 2014 Page 12

13 TD1 - Carrier Details (Quantity and Weight) Position: 110 Level: Detail Loop: HL - Shipment Max Use: 20 Purpose: To define Carrier Details (Quantities and Weight). 1. If TD101 is present, then TD102 is required. 2. If TD103 is present, then TD104 is required. 3. If TD106 is present, then TD107 is required. 4. If either TD107 or TD108 is present, then other is required. 5. If either TD109 or TD110 is present, then other is required. TD1*CTN90*200~ TD Packaging code M AN 3/5 Code identifying the type of packaging. CTN90 CARTOON PLT90 PALLET BOX90 BOX TD Lading Quantity M N0 1/7 Number of Units (pieces) Of the Lading commodity JANUARY 26, 2014 Page 13

14 TD5 - Carrier Details (Routing Sequence) Position: 120 Level: Detail Loop: HL - Shipment 2 Purpose: To specify the carrier and sequence of routing and provide transit time 1. At least one of TD502 TD504 TD506 or TD512 is required 2. If TD502 is present, then TD503 is required TD5**2*FDEX*AF~ TD Routing Sequence Code O ID 1/2 B Origin Delivery Carrier O Origin Carrier (Air, Motor, Ocean) TD Identification Code Qualifier M ID 1/2 2 SCAC TD Identification Code M AN 2/80 Code identifying a party or other code SCAC code. TD Transportation Method Type Code X ID 1/2 Code specifying the method or type of transportation for the shipment. LT Less than a Trailer Load AF Air Freight SE Sea / Air JANUARY 26, 2014 Page 14

15 TD3 - Carrier Details (Equipment Details) Position: 130 Level: Detail Loop: HL - Shipment 2 Purpose: To specify the transportation details relating to the equipment used by the carrier 1. Only one of TD301 or TD310 may be present 2. If TD302 is present, then TD303 is required 3. If TD304 is present, then TD305 is required 4. If either TD305 or TD306 is present, then the other is required TD3*AF**719878~ TD Equipment Description Code M ID 2/2 Code identifying type of equipment used for shipment TL Trailer AF Air Freight TD Equipment Initial O AN 1/4 Prefix or alphabetic part of equipment unit's identifying number TD Equipment Number M AN 1/10 Sequencing or serial part of an equipment units Identifying number (Equipment or trailer number) JANUARY 26, 2014 Page 15

16 REF - Bill of Lading Number Position: 150 Level: Detail Loop: HL - Shipment Purpose: To specify the identifying information REF*BM*437861~ REF Reference Number Qualifier M ID 2/2 Code qualifying the Reference Identification BL Bill of Lading REF Reference Number M AN 1/30 Bill of Lading Number JANUARY 26, 2014 Page 16

17 REF - Packing Slip Number Position: 150 Level: Detail Loop: HL - Shipment Purpose: To specify the identifying information REF*PK*437861~ REF Reference Number Qualifier M ID 2/2 Code qualifying the Reference Identification PK Packing Slip REF Reference Number M AN 1/30 Packing Slip Number JANUARY 26, 2014 Page 17

18 REF - References ANSI X12 V Position: 150 Level: Detail Loop: HL - Shipment Max Use: >1 Purpose: To specify the identifying information REF*2I*48789~ REF*AW*92388~ REF*DK* ~ REF Reference Number Qualifier M ID 2/2 Code qualifying the Reference Identification AW Airway Bill 2I Tracking Number DK Dock Number REF Reference Number M AN 1/30 Reference Number JANUARY 26, 2014 Page 18

19 N1 - Name Ship To Position: 220 Level: Header Loop: N1 Purpose: To define Addresses of the Ship to. ANSI X12 V N1*ST*F-M Corp*92* ~ N Entity Identifier code M ID 2/3 ST FM Plant N Name M AN 1/35 FM Plant Name N Identification Code Qualifier M ID 2/2 92 Assigned by BUYER N Identification Code M AN 4/15 Preferred usage is Individual Federal-Mogul location Duns Number. (See Attached List) Federal-Mogul unique plant number. JANUARY 26, 2014 Page 19

20 N2 - Name Ship To ANSI X12 V Position: 230 Level: Header Loop: N1 Purpose: To define Addresses of the Ship to. Used for N1 Ship-to Party (ST) location. Not used for N1 Ship-from (SF) location. N2*FEDERAL MOGUL~ N Entity Identifier code O ID 2/80 ST - Code identifying the FM Plant N Name O AN 1/60 FM Plant Name JANUARY 26, 2014 Page 20

21 N3 - Name Ship To Position: 240 Level: Header Loop: N1 Purpose: To define Addresses of the Ship to. ANSI X12 V N3*1072 PROGRESS WAY~ N Additional Address info O AN 1/55 Address Information N Additional Address info O AN 1/55 Address Information JANUARY 26, 2014 Page 21

22 Position: 250 Level: Header Loop: N1 Purpose: To define Addresses of the Ship to. ANSI X12 V N4 - Geographical Location N4*MAYSVILLE*KY*41056~ N City O AN 2/30 Free-form text for city name N State O ID 2/2 Code (Standard State/Province) as defined by appropriate government agency N Zip Code O ID 3/15 Code defining international postal zone code excluding punctuation and blanks (zip code for United Stated) N Country O ID 2/3 Code identifying the country JANUARY 26, 2014 Page 22

23 N1 - Name - Supplier Position: 220 Level: Detail Loop: N1 Purpose: To define Addresses of the Supplier. ANSI X12 V At least N102 or N103 is required. If either N103 or N104 is present then the other is required. N1*SF*AYDINLAR *92* ~ N Entity Identifier code M ID 2/3 SF - Code identifying the supplier/manufacturer ship from location N Name M AN 1/60 Supplier Name N Identification Code Qualifier M ID 2/2 92 Assigned by BUYER N Identification Code M AN 2/80 Preferred usage is FM Supplier Code Or Supplier Duns Number /GS id. JANUARY 26, 2014 Page 23

24 HL - Hierarchical Level - Item Position: 010 Level: Detail Loop: HL - Item Max Use: >1 Purpose: To define Hierarchical Level ITEM. HL*2*1*I~ HL Hierarchical ID Number M AN 1/12 A unique number assigned by the sender to identify a particular data segment in a hierarchical structure HL Hierarchical Parent ID Number M AN 1/12 Identification number of the next higher hierarchical data segment that the data segment being described is subordinate to HL Hierarchical Level Code M ID 1/2 Code defining the characteristic of a level in a hierarchical structure I Item Level JANUARY 26, 2014 Page 24

25 LIN - ITEM IDENTIFICATION Position: 020 Level: ITEM Loop: HL - ITEM Purpose: To specify basic ITEM identification data 1. If either LIN04 or LIN05 is present, then the other is required. 2. If either LIN06 or LIN07 is present, then the other is required. 3. If either LIN08 or LIN09 is present, then the other is required. 4. If either LIN10 or LIN11 is present, then the other is required. 5. If either LIN12 or LIN13 is present, then the other is required. LIN**BP*FD-TC-7260*VP*94FR02654*CH*TR~ LIN Product/Service ID Qualifier M ID 2/2 BP Buyer Part number (Federal Mogul) LIN Product/Service ID M AN 1/48 LIN Product/Service ID Qualifier M ID 2/2 VP Vendor Part Number LIN Product/Service ID M AN 1/48 LIN Product/Service ID Qualifier M ID 2/2 CH Country Origin LIN Product/Service ID M AN 1/48 LIN Product/Service ID Qualifier M ID 2/2 BT Batch Number LIN Product/Service ID M AN 1/48 LIN Product/Service ID Qualifier M ID 2/2 RY Record Keeping or Model Year JANUARY 26, 2014 Page 25

26 LIN Product/Service ID M AN 1/48 LIN Product/Service ID Qualifier M AN 2/2 EC Engineering Change Number LIN Product/Service ID M ID 1/48 LIN Product/Service ID Qualifier M AN 2/2?? Revision Number LIN Product/Service ID M ID 1/48 JANUARY 26, 2014 Page 26

27 SN1 - Net Shipped ANSI X12 V Position: 030 Level: Detail Loop: HL - Item Purpose: To specify line- item detail relative to shipment SN1**40*EA~ SN Numbers of Units Shipped M R 1/6 Total quantity of pieces shipped for this line item SN Unit or Basis for Measurement Code M ID 2/2 Use the same unit of measure that was sent On the purchase order. JANUARY 26, 2014 Page 27

28 SLN - Sub-line Item Detail Position: 040 Level: Detail Loop: HL - Item 000 Purpose: To specify product sub-line detail item data 1. If either SLN04 or SLN05 is present, then the other is required. 2. If SLN07 is present, then SLN06 is required. 3. If SLN08 is present, then SLN06 is required. SLN*1**A*12000*PC*.116~ SLN Assigned Identification M AN 1/20 Alphanumeric characters assigned for differentiation within a transaction set SLN Relationship Code M ID 1/1 Code indicating the relationship between entities SLN Quantity M R 1/15 Numeric value of quantity (Quantity Shipped) SLN05 C001 Composite Unit of Measurement M To identify a composite unit of measure C Unit or Basis for Measurement Code M ID 2/2 Code specifying the units in which a value is being expressed, or manner in which a measurement has been taken (Unit of Measure) SLN Unit Price M R 1/17 Price per unit of measure JANUARY 26, 2014 Page 28

29 PRF - Purchase Order Reference Number Position: 050 Level: Detail Loop: HL - Item Purpose: To provide reference to a specific purchase order. PRF* ****32~ PRF Federal Mogul Purchase Order Number M AN 1/20 PRF Federal Mogul Order Date M DT 8/8 Date expressed as CCYYMMDD This is the date the Purchase order was created by Federal Mogul PRF Purchase Order Line Item Number M AN 1/5 PO line number is sent on the Purchase order and matched on the ASN JANUARY 26, 2014 Page 29

30 MEA - Measurements ANSI X12 V Position: 080 Level: Detail Loop: HL - Item Usage: Optional Max Use: 40 Purpose: To specify physical measurements or counts, including dimensions, tolerances, variances and weights. 1. At least one of MEA03, MEA05, MEA06 or MEA08 is required. 2. If MEA05 is present then MEA04 is required. 3. If MEA06 is present then MEA04 is required. MEA*PD*G*2.00*KG~ MEA Measurement Reference O ID 2/2 PD Physical Description MEA Measurement Qualifier O ID 1/3 G Gross Weight MEA Measurement Value M R 1/20 MEA04 C001 Composite Unit of Measurement M To identify Composite Unit of Measure C Unit or basis for Measurement Code M ID 2/2 Code specifying the unit in which value is being expressed LB Pounds KG Kilograms JANUARY 26, 2014 Page 30

31 Position: 120 Level: Detail Loop: HL - Item Usage: Optional Purpose To specify the status ANSI X12 V TD5 - Shipped/Backordered/Cancelled Status TD5*****X*CC~ TD Routing Sequence Code O ID 1/2 TD Identification Code Qualifier O ID 1/2 TD Identification Code O ID 2/17 Code identifying a party or other code TD Transportation Method Type Code O ID 1/2 TD Routing M AN 1/35 X Item Status TD Ship/Order Status Code M ID 2/2 BK Shipment of previous backorder BP Partial Shipment/balance back ordered CC Shipped complete CP Partial Shipment/ balance cancelled Use status code CC if you are shipping 100% of the quantity requested on the purchase order. Use status code CP if you are shipping less than 100% of the quantity requested on the purchase order and canceling the balance. Use status code BP if you are shipping less than 100% of the quantity requested on the purchase order and backordering the balance. Use status code BK if you are shipping an item that was previously backordered. JANUARY 26, 2014 Page 31

32 CLD - Load Details ANSI X12 V Position: 170 Level: Detail Loop: HL - Item Purpose: To specify the number of material loads shipped. CLD*2*20~ CLD Number of Loads M N0 1/5 Number of customer-defined loads shipped by the supplier CLD Number of Units M R 1/10 Number of Parts in Container. CLD Packing Code M AN 3/5 Type of Container JANUARY 26, 2014 Page 32

33 REF - References Position: 180 Level: Detail Loop: CLD Usage: Optional Max Use: 200 Purpose: To specify identifying information. ANSI X12 V At least one of REF02 or REF03 is required. REF*LS*B1267~ REF Reference Identification Qualifier M ID 2/3 LS Bar Coded Number REF Reference Identification M AN 1/30 Bar Code Packaging ID Number JANUARY 26, 2014 Page 33

34 CTT Transaction Totals Position: 010 Level: Summary Loop: N/A Purpose: To transmit a hash total for a specific element in the transaction set. CTT*2~ CTT Number of Line Item s M N0 1/6 Number of HL Segment CTT Hash Totals O R 1/10 Sum of Values of the Shipped Quantity JANUARY 26, 2014 Page 34

35 Position: 020 Level: N/A Loop: Summary Purpose: ANSI X12 V SE - Transaction Set Trailer SE*39*00001~ SE01 96 Number of Included Segments M N0 1/10 Count of Segments within The Transaction Set. SE Transaction Set Control Number M AN 4/9 Control Number of the Transaction Set assigned by Sender. JANUARY 26, 2014 Page 35

36 Position: 030 Level: N/A Loop: Summary Purpose: ANSI X12 V GE - Functional Group Trailer GE*1*1~ GE01 97 Number of Included Sets M N0 1/6 GE02 28 Group Control Number M N0 1/9 JANUARY 26, 2014 Page 36

37 Position: Level: N/A Loop: Summary Purpose: ANSI X12 V IEA - Interchange Envelope Trailer IEA*1* ~ IEA01 I16 Number of Included Functional Groups M R 1/6 IEA02 I12 Interchange Control Number M R 1/12 JANUARY 26, 2014 Page 37

38 FEDERAL-MOGUL LOCATION DUNS NUMBER / ID LISTING ATHENS AVILLA BLACKSBURG EL PASO FRANKFORT GREENVILLE LINAN LOGANSPORT MALDEN MANITOWOC PUEBLA PUEBLA PISTON S RAIMSA SCHOFIELD SKOKIE SOUTH BEND SPARTA, MI SPARTA, TN TEPOZOTLAN VAN WERT WAUPUN WINDSOR JANUARY 26, 2014 Page 38

39 Appendix A: Federal-Mogul ship to locations and addresses. Plant Dock Address Federal-Mogul Corporation Smyrna Distribution Center 2100 Midway Lane Smyrna, TN USA Federal-Mogul Corporation Smyrna Distribution Center 1900 Midway Lane Smyrna, TN USA Federal-Mogul Corporation Los Angeles Distribution Center 2100 Yates Avenue Los Angeles, CA USA Federal-Mogul Corporation Jacksonville Distribution Center 2599 Alabama Hwy. 21 North Jacksonville, AL USA Federal-Mogul Corporation Glasgow Friction 20 Aberdeen Drive Glasgow, KY USA Federal-Mogul Corporation Concord Distribution Center 59 Administration Road Concord, Ontario L4K 2R8 CANADA Federal-Mogul Friction Products a.s. Federal-Mogul Aftermarket Czech Rude Armady Kostelec nad Orlicí Czech Republic Federal-Mogul Corporation JANUARY 26, 2014 Page 39

40 Central Distribution Centre Prins Boudewijnlaan Kontich Belgium Federal-Mogul Corporation Central Distribution Centre Kontichsesteenweg Aartselaar Belgium Federal-Mogul Aftermarket España SA 41 C/ Mario Roso de Luna Polígono Fin de Semana Madrid Spain Federal-Mogul Aftermarket España SA 439 Alfons XII 8918 Badalona, Barcelona Spain Federal-Mogul Aftermarket España SA 23-1 Polígono Store, Gramil Sevilla Spain Federal-Mogul Aftermarket España SA 7-B C/ Vía Pasteur Polígono Industrial del Tambre Santiago de Compostela (A Coruña) Spain Federal-Mogul Ibérica, S.L. 5-7 Avda. 1ª del Parc Logistic Polígono Zona Franca Barcelona Spain Federal-Mogul Italy S.r.l. Stabilimento di Verona 8 Via E. Fermi Verona Italy Federal-Mogul Italy S.r.l. Divisione Racing & Motorcycle 2 Corso Inghilterra JANUARY 26, 2014 Page 40

41 12084 Mondovi Italy Federal-Mogul Aftermarket France SA Local Distribution Centre FR rue d'anjou Boulogne Billancourt France Federal-Mogul Aftermarket UK Ltd Greyhound Drive BD7 1NQ Bradford United Kingdom JANUARY 26, 2014 Page 41

42 Appendix B: 856 TRANSACTION EXAMPLE: ISA*00* *00* *01* Z *01* *140215*0119*U*00401* *0*P*>~ GS*SH* Z* * *0119*1*X*004010~ ST*856*00001~ BSN*00*437861* *0114~ DTM*011* *0000~ DTM*017* *0000~ HL*1**S~ MEA*PD*G*2.00*KG~ TD1*CTN90*788987~ TD5**2*FDEX*AF~ TD3*AF**719878~ REF*BM*437861~ REF*PK*437861~ REF*2I*48789~ REF*AW*92388~ REF*DK* ~ N1*ST*F-M Corp*92* ~ N2*FEDERAL MOGUL~ N3*1072 PROGRESS WAY~ N4*MAYSVILLE*KY*41056~ N1*SF*AYDINLAR *92* ~ HL*2*1*I~ LIN**BP*FD-TC-7260*VP*94FR02654*CH*TR~ SN1**40*EA~ SLN*1**A*12000*PC*.116~ PRF* ****32~ MEA*PD*G*2.00*KG~ TD5*****X*CC~ CLD*2*20~ REF*LS*B1267~ HL*3*1*I~ LIN**BP*FD-ES-5108*VP*91FR06946*CH*TR~ SN1**160*EA~ SLN*1**A*12000*PC*.116~ PRF* ****19~ MEA*PD*G*2.00*KG~ TD5*****X*CC~ CLD*2*20~ REF*LS*B1267~ CTT*2~ SE*39*00001~ GE*1*1~ IEA*1* ~ JANUARY 26, 2014 Page 42

43 Appendix C: Country Code List AU BR CA CH CL CN CO CU DE ES FR GB GR HK IE IN IT JP KP KR MX NL NO PH PL PR PT RO RU SA SE SG TW US VE ZA Australia Brazil Canada Switzerland Chile China Colombia Cuba Germany Spain France United Kingdom Greece Hong Kong Ireland India Italy Japan Korea, Democratic People s Republic of Korea, Republic of Mexico Netherlands Norway Philippines Poland Puerto Rico Portugal Romania Russian Federation Saudi Arabia Sweden Singapore Taiwan United States Venezuela South Africa JANUARY 26, 2014 Page 43

44 APPENDIX D: Federal-Mogul Plant and Warehouse DUNS numbers: Federal-Mogul Federal-Mogul EDI Check FM FM Plant Plant DUNS Location YES Product Group Code Athens, AL Gaskets AT Avilla, IN Electrical Components AV Blacksburg, VA Engine Bearings BB Boyertown, PA Cooper Lighting BY Burlington, IA Spark Plugs BU Frankfort, IN Seals FF Greenville, MI Engine Bearings GV Indianapolis, IN Warehouse IN Jacksonville, AL Warehouse JX Linan, Mexico Seals (Parent (Naucalpan) Saisa) NA Logansport, IN Fuel Systems LO Maysville, KY Warehouse MY Michigan City, IN MC Orangeburg, SC Friction (Rowesville) OR Puebla, Mexico Engine Bearings PB Puebla, Mexico Pistons PP Skokie, IL Gaskets SK Smithville, TN Friction SI South Bend, IN Pistons SB (T) Southfield, MI FM Corporation FM Sparta, TN Lighting ST Summerton, SC Seals SU Sumter, SC Pistons SE Tepotzotlan, Mexico Gaskets TF/TS Vallejo, Mexico Spark Plugs VA Van Wert, OH Seals VW Waupun, WI Sintered WP Winchester, VA Friction Products WI Windsor, Canada Camshafts WN Customer Supplier Code 1. Enveloping - OE FM ISA Qualifier and ID Production: FM ISA Qualifier and ID Test: FM GS ID Test and Production: 01/ / T Please select appropriate DUNS for plant in table above. ID is the same for test and production JANUARY 26, 2014 Page 44