82 CONDUCTIVE TAPES SHEETS
|
|
- Merryl Booth
- 7 years ago
- Views:
Transcription
1 82 CONDUCTIVE TAPESSHEETS CONDUCTIVE FABRIC Conductive fabric tape Conductive fabric P83 CONDUCTIVE FABRIC TAPE METAL FOIL P84 CONDUCTIVE FABRIC TAPE Low-resistivity type using embossed metal foil and conductive adhesive material. Metal foil (embossed) Embossed type P83 Metal foil Standard type P85 COPPER EMBOSSING TAPE CONDUCTIVE TAPE THIN FILM Super-thin conductive film with thickness of 35 µm. Thin film P88 REMILESS CLEAR CONDUCTIVE FILM ITO, Indium Tin Oxide, conductive film has superior optical transparency. Clear Conductive Film P87
2 COPPER EMBOSSING TAPECCTE-C 83 Embossed parts of the metal foil make direct contact with the object Embossed parts are bent to provide direct contact with the object. Large contact area provides stable contact. Rolled copper foil Standard length Sheet type The values are measured data for reference, not guaranteed. CONDUCTIVE FABRIC TAPECSTK Thin and durable carbon-coated type Carbon-coating protects from the galvanic corrosion suffered by metal foils. Carbon-coated special knitting provides no yarn-loosening or fuzz on the surface. Carbon-coated tape with low resistivity, effective against electrostatic discharge. Conductive woven fabric / Cu-Ni plated woven fabric with carbon-coating (UL510FR) Standard length: 20m Part No. () Width CSTK CSTK CSTK CSTK CSTK CSTK CSTK CSTK () Thickness adhesive strength Resistivity N/25Width 0.04 /20 CSTK-2 2 CSTK The values are measured, but not guaranteed.
3 84 CONDUCTIVE FABRIC TAPECNT Various width are available Conductive adhesive is made of mixed metal pastes with the normal adhesive to improve conductivity. This material has very good effectiveness for EMI shielding and electric to objects needed conductivity. Non-dioxin type flame retardent. Backing CF-235 (Rip-Stop) Part No. width () CNT-10H 10 CNT-20H 20 CNT-25H 25 CNT-H Ni+Cu+Ni roll (m) Adhesive Conductive Acrylic Adhesive Non-Dioxin type FR Conductive Filler Nickel Powder Liner Release Liner Paper Standard sizes & Appearance Overall 0.14±0.02 Thickness Backing Adhesive Release Liner Color - Gray Conductive Acrylic Adhesive (non-dioxin) General Properties Adhesion gf/25 Ball tack No. Shielding Effectiveness db Holding Power Surface Resistance /cm2 Electric Resistance /cm2 Structure ~9 60~70 No Creep Less than 0.05 Less than 0.03 JIS Z 0237 JIS Z 0237 ASTM D JIS Z 0237 ISL 2000A HIOKI 3540 Conductive Fabric Release Liner
4 CONDUCTIVE TAPECCT 85 Thin and flexible metal foil tape backed by a conductive filler adhesive Easy application same uses as a transparent tape. High shielding effectiveness due to highly conductive adhesive tape. Easy cutout or configuration for optimum shielding effectiveness. Dimension Supporting Base width () length () Soft Copper Soft Aluminium Soft Copper doublesided tin-coated CCT-10-C CCT-10-A CCT-10-CS CCT-15-C CCT-15-A CCT-15-CS CCT-20-C CCT-20-A CCT-20-CS CCT-25-C CCT-25-A CCT-25-CS 33 CCT--C CCT--A CCT--CS Other width available upon request Custom Parts Technical Data Colour original silver silver Thickness without adhesive () 0,030 ± 10% 0,0 ± 10% 0,035 ± 10% Total Thickness () 0,060 ± 10% 0,080 ± 10% 0,065 ± 10% Adhesive Properties Type of adhesive Acrylic, electrically conductive Adhesive strength (N/10 ) >2 2 2 Thermal Properties Temperature performance ( C) -40 to to to +130 Short term Temperature performance ( C) Flaability according to IEC Electric Properties Electrical resistance according to PV (internal, measured at ambient temperature) Mechanical Properties flame retardant Tensil strength (N/10 ) Elongation at break in % Liner Storage conditions silicon paper cool and dry (15 25 C, <65% rel. humidity) Electrical properties will generally stay in tact up to 80 C, however they depend on the application/type of assembly. Customer specific tests are strongly recoended. Customer demands special parts made of all foils and laminates:
5 Clear Conductive Film WINAL Usable for EMC measures around liquid crystal displays and as various kinds of electrodes ITO, Indium Tin Oxide, conductive film has superior optical transparency. Protected by PE film on both surfaces. Grounding terminal with aluminum foil can be provided upon Base material: PET film (75µm) Surface protection film (green) Conductive layer (ITO film) Surface protection film (clear) Structure Properties Shielding Additional Alternative All specifications and characteristics shown herein are typical values, but are not guaranteed. All specifications and characteristics shown herein are subject to change without notice for improvements or changes in specification.
6 88 REMILESSREMI Super-thin surface-conductive film Overall thickness 35µm (-SC). Provides high-shielding effectiveness and galvanic corrosion resistance. Safer handling compared with metal foil tapes. Suitable noise control for flexible cables. Base material / PPS Metal membrane / SUSCu Property Surface resistivity 1 (/) Shielding properties (db) Overall thickness () REMI-SC 1) Measured in film state 2) Double-sided adhesive tape excluded <0.5 > REMI-AC Flame retardant 2 UL510 FR
Athena is the name given to our assortment of electronic tapes. products of the very highest quality. These tapes both conduct and
Electric Athena. Athena is the name given to our assortment of electronic tapes products of the very highest quality. These tapes both conduct and insulate against electricity, in addition to warmth and
More informationEMI Shielding Tapes Product Selection Guide. Trusted. Performance. from the. Tape Experts
EMI Shielding Tapes Product Selection Guide Trusted Performance from the Tape Experts 3M EMI Shielding Tapes A wide variety of tapes for EMI shielding and grounding Copper, aluminum, and tin-plated copper
More informationThermal Management Solutions for Printed Circuit Boards used in Digital and RF Power Electronics and LED assemblies
Thermal Management Solutions for Printed Circuit Boards used in Digital and RF Power Electronics and LED assemblies Sandy Kumar, Ph.D. Director of Technology American Standard Circuits, Inc 3615 Wolf Road
More informationADHESIVES TAPES FOR CAR S INDUSTRY All tapes can be supplied in die cuts form and more tapes available
ADHESIVES TAPES FOR CAR S INDUSTRY All tapes can be supplied in die cuts form and more tapes available Aluminium foil tapes PPI-901: Aluminium adhesive tape with thermosetting polyacrylate adhesive. Several
More informationreferenceguide Reference Guide for Pressure-Sensitive Adhesive Tapes great to work with
referenceguide Reference Guide for Pressure-Sensitive Adhesive Tapes referenceguide Table of Contents Tapeology 1-5 What is a pressure-sensitive tape? 1 What are the different components of a tape? 1 How
More information3M Electrically Conductive Adhesive Transfer Tape 9703
Technical Data April 2011 M Electrically Conductive Adhesive Transfer Tape 970 Product Description M Electrically Conductive Adhesive Transfer Tape 970 is a pressure sensitive adhesive (PSA) transfer tape
More informationAdhesive Transfer Tapes with Adhesive 200MP 467MP 468MP 467MPF 468MPF 7952MP 7955MP 7962MP 7965MP 9172MP 9185MP 9667MP 9668MP
Adhesive Transfer Tapes with Adhesive 200MP 467MP 468MP 467MPF 468MPF 7952MP 7955MP 7962MP 7965MP 9172MP 9185MP 9667MP 9668MP Technical Data March, 2014 Product Description 3M High Performance Acrylic
More informationSECTION 07 21 16 - PRE-ENGINEERED BUILDING BLANKET INSULATION
PROJECT ARCHITECT RESPONSIBILITY: This is a general specification guide, intended to be used by experienced construction professionals, in conjunction with good construction practice and professional judgment.
More informationPTFE Teflon Glass Fabric Grades & Material Data Sheets
PTFE Teflon Glass Fabric Grades & Material Data Sheets Taconic TAC-TAPES Taconic TAC-TAPES are constructed with high-quality adhesives and backing materials to deliver superior performance. A choice of
More informationThermal Control Overview
Thermal Control Overview One of NASA s many challenges on the Apollo program was insulating moon walking astronauts from lunar daytime temperatures approaching 130 o C (265 o F) and night time temperatures
More informationBasic Properties and Application Examples of PGS Graphite Sheet
Basic Properties and Application Examples of 1. Basic properties of Graphite sheet 2. Functions of Graphite sheet 3. Application Examples Presentation [Sales Liaison] Panasonic Electronic Devices Co.,
More informationWelding. Module 19.2.1
Welding Module 19.2.1 Hard Soldering Hard soldering is a general term for silver soldering and brazing. These are very similar thermal joining processes to soft soldering in as much that the parent metal
More informationAluminum versus Copper Conductors
www.siemens.com/datacenter Aluminum versus Copper Conductors Application of Aluminum conductors in Bus Way systems for more sustainable Data Centers White Paper October 2014 Two main conductor materials
More information3M Dual Lock Reclosable Fastener
3 Dual Lock Reclosable Fasteners SJ3550CF (Type 250) SJ3551CF(Type 400) SJ3552CF(Type 170) Dual Lock Reclosable Fastener Black with a clear acrylic adhesive Product Information February, 2007 Product Description
More informationMake up Epoxy adhesive
Epoflex Base Materials series of MSC Polymer AG offers flexible base materials from simple single side flexible boards, flex-rigid applications up to highly complex multilayer boards. The dielectric is
More informationHigh-ohmic/high-voltage resistors
FEATURES These resistors meet the safety requirements of: UL1676 (range 510 kω to 11 MΩ) EN60065 BS60065 (U.K.) NFC 92-130 (France) VDE 0860 (Germany) High pulse loading capability Small size. APPLICATIONS
More informationALLOY 6022 SHEET. Higher Strength with Improved Formability SUPPLYING THE WORLD S BEST
SUPPLYING THE WORLD S BEST DESCRIPTION 6022 is a heat treatable low copper, Al-Si-Mg sheet alloy developed by Alcoa to satisfy the needs of automotive manufacturers for closure panels, such as a hood,
More information3 Nextel Textiles. Ceramic fiber products for outerspace applications.
3 Nextel Textiles Ceramic fiber products for outerspace applications. Physical Properties 3M Nextel Fabrics, Tapes, and Sleevings are designed to meet the toughest thermal, mechanical and electrical performance
More informationHigh-ohmic/high-voltage resistors
FEATURES High pulse loading capability Small size. APPLICATIONS Where high resistance, high stability and high reliability at high voltage are required High humidity environment White goods Power supplies.
More informationHow to Build a Printed Circuit Board. Advanced Circuits Inc 2004
How to Build a Printed Circuit Board 1 This presentation is a work in progress. As methods and processes change it will be updated accordingly. It is intended only as an introduction to the production
More information3 Single-Coated Foam Tapes
3 Single-Coated Foam Tapes Technical Data May, 2008 Product Description 3M Single-Coated Foam Tapes will adhere to a variety of substrates, including latex-painted wood, lacquered wood, enameled steel,
More informationCommunication, Signal & Data Cables
Communication, Signal & Data Cables Used for indoor installation and interconnection of transmission, telephone, telegraph and electronic equipment as well as media equipments www.alfanar.com Communication
More informationLaminating Films - Heat Activated
Laminating Films - Heat Activated Print Guard UV This film features superb ultraviolet protection at low activation temperature (185º F - 195º F) and an aggressive solvent acrylic adhesive. Linerless Print
More informationCopper Alloys COPPER ALLOYS. Weld Tech News VOL 1. NO. 8
Copper Alloys Weld Tech News VOL 1. NO. 8 WELD TECH NEWS is a newsletter for welders working primarily in maintenance and repair. Each issue contains useful information on materials (cast irons, steels,
More information3M Thermal Bonding Film AF42
Technical Data August 2015 3M Thermal Bonding Film AF42 Product Description 3M Thermal Bonding Film AF42 is an epoxy, thermoset film adhesive developed for structural bonding of metal, glass and other
More information4.0. Identification Systems XXX. xxx
4.0 XXX xxx 130 15 4.0 For the temporary or permanent labelling and identification of cables, wiring and connecting components. As cable flags, markers and tags, or as labels with protective film to secure
More informationNorth American Stainless
North American Stainless Flat Products Stainless Steel Grade Sheet 310S (S31008)/ EN 1.4845 Introduction: SS310 is a highly alloyed austenitic stainless steel designed for elevated-temperature service.
More informationSafety Certification for Lead Free Flexible and Rigid-Flex PCBs
Safety Certification for Lead Free Flexible and Rigid-Flex PCBs Crystal Vanderpan Underwriters Laboratories Inc. March 27, 2007 Crystal Vanderpan Principal Engineer for Printed Circuit Technologies Joined
More informationIntroduction: Consumables - Part of the Identification System
Consumables - The Basics A presentation from: Introduction: Consumables - Part of the Identification System You have spent many hours researching, selecting, and getting approval for your new data collection
More informationElectroluminescent Materials
Electroluminescent Materials Electroluminescent Materials Overview. Product Range. GEM s products are based on a unique curing process that results in the low temperature formation of a thermosetting polymer
More informationAutomotive Engineered Attachment Systems
Automotive Engineered Attachment Systems (TR-12721) Technical Data Sheet Acrylic Foam RT8000 Series General Information : The acrylic Foam RT8000 Series, which is made by a special process, has a superior
More informationNAN YA NYLON 66 Engineering Plastics. Flame Retardant.High Toughness.Heat Resistant. Impact Resistant.Moldability.Low Warpage
NAN YA NYLON 66 Engineering Plastics Flame Retardant.High Toughness.Heat Resistant. Impact Resistant.Moldability.Low Warpage Introduction NAN YA FR-NYLON 66 has water absorption propertieslike other nylons.
More informationTECHICAL SPECIFICATION Conductive Elastomer Extruded Gaskets
Pag. 1/8 TECHICAL SPECIFICATION Conductive Elastomer Extruded Gaskets Electrically conductive silicone gaskets are manufactured in different standard profiles and upon client request, in silicone and fluorosilicone,
More information100% EMI Emission Containment
100% EMI Emission Containment Designed for Longer Service Life Highly Flexible for Easier Handling and Faster Installation Authorized Distributor Industrial VFD Cables Index n Variable Frequency Drive
More informationHarsh Environment Connector Material Selection Guide
Harsh Environment Connector Material Selection Guide Introduction To ensure robust and reliable system performance, harsh environment fiber optic (HEFO) connectors must meet certain requirements. To meet
More informationZero peel strength of acrylic pressure sensitive adhesive is at about 45 C (-50 F).
PRODUCT BULLETIN Aluminum Polyimide Acrylic (3M 966) PSA First Surface Aluminum Coated Polyimide Tape with Acrylic 3M 966 Adhesive TAPES Sheldahl Brand Materials first surface aluminized polyimide tape
More informationNeal O Hara. Business Development Manager
Neal O Hara Business Development Manager PCS OFFERING User Interface Flex Circuit Solutions Sensor Systems Multilayer Copper Flex Circuits LED Lighting 2 VERTICAL INTEGRATION FPC Connector Picoflex on
More informationFLEXIBLE CIRCUITS MANUFACTURING
IPC-DVD-37 FLEXIBLE CIRCUITS MANUFACTURING Below is a copy of the narration for DVD-37. The contents of this script were developed by a review group of industry experts and were based on the best available
More information3M Thermally Conductive Adhesive Transfer Tapes
Technical Data July 215 3M Thermally Conductive Adhesive Transfer Tapes 885 881 8815 882 Product Description 885, 881, 8815 and 882 are designed to provide a preferential heat-transfer path between heat-generating
More informationProduct Guide Specification
Reef Industries, Inc. 9209 Almeda Genoa Rd. Houston, Texas 77075 Toll Free (800) 231-6074 Phone (713) 507-4251 Fax (713) 507-4295 Web Site www.reefindustries.com E-Mail ri@reefindustries.com Product Guide
More informationNorth American Stainless
Introduction: North American Stainless Flat Products Stainless Steel Grade Sheet 309S (S30908)/ EN1.4833 SS309 is a highly alloyed austenitic stainless steel used for its excellent oxidation resistance,
More informationGood Boards = Results
Section 2: Printed Circuit Board Fabrication & Solderability Good Boards = Results Board fabrication is one aspect of the electronics production industry that SMT assembly engineers often know little about.
More informationStandard Thick Film Chip Resistors
Standard Thick Film Chip Resistors FEATURES Stability R/R = 1 % for 00 h at 70 C 2 mm pitch packaging option for size Pure tin solder contacts on Ni barrier layer provides compatibility with lead (Pb)-free
More informationDIVISION 23 HEATING, COOLING, AIR CONDITIONING AND VENTILATION
SECTION 230713- ALUMAGUARD ENGINEER SPECIFICATION DIVISION 23 HEATING, COOLING, AIR CONDITIONING AND VENTILATION PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract,
More informationRemovable Insulation Blankets from A to Z
Removable Insulation Blankets from A to Z At first glance, making up a removable insulation blanket seems somewhat simple take some insulation, put some mesh on one side, a cover on the other, sew them
More information- - - - Steel Panel Frame. Exterior Steel Sheeting. Optional Rigid Insulation. Optional Steel Insulation Liner
The Kelly Klosure pre-framed modular panel has 4 components that are factory finished to create an easy and versatile bolt-together system in the field. Steel Panel Frame Exterior Steel Sheeting Optional
More informationNorth American Stainless
North American Stainless Flat Products Stainless Steel Grade Sheet 430 (S43000)/ EN 1.4016 Introduction: SS430 is a low-carbon plain chromium, ferritic stainless steel without any stabilization of carbon
More informationPerformance of Carbon-PTFE Electrodes and PTFE Separators in Electrochemical Double Layer Capacitors (EDLCs)
Performance of Carbon-PTFE Electrodes and PTFE Separators in Electrochemical Double Layer Capacitors (EDLCs) David Zuckerbrod, Robert Sassa, Marianne Szabo, Meagan Mizenko Abstract: W. L. Gore & Associates
More information3 Dual Lock Reclosable Fasteners
3 Dual Lock SJ3551 (Type 400) SJ3552(Type 170) SJ3550(Type 250) Technical Data August, 2005 Product Description Product Construction 3M Dual Lock SJ3550, SJ3551 and SJ3552 consist of continuous strips
More informationChapter 5 - Aircraft Welding
Chapter 5 - Aircraft Welding Chapter 5 Section A Study Aid Questions Fill in the Blanks 1. There are 3 types of welding:, and, welding. 2. The oxy acetylene flame, with a temperature of Fahrenheit is produced
More information3M Electrical. OEM Electrical Insulating Tapes
3M Electrical OEM Electrical Insulating Tapes Acetate Cloth Anti-static Composite Cotton Cloth Epoxy Film Filament Reinforced Foil Glass Cloth Non-woven Rayon Paper Polyester Polyimide PTFE Vinyl Page
More informationTechnical Data Sheet February 2014
Scotch-Weld Technical Data Sheet February 2014 Product Description s are high performance, two-part acrylic adhesives that offer excellent shear, peel, and impact performance. These toughened products
More information3M Bumpon Protective Products Molded Shapes - Colored and Clear Series SJ5000 SJ5300 SJ5400 SJ5500 SJ5700 SJ6100
Technical Data July 2015 3M Bumpon Protective Products Molded Shapes - Colored and Clear Series SJ5000 SJ5300 SJ5400 SJ5500 SJ5700 SJ6100 Product Description 3M Bumpon Protective Products Molded Shapes
More informationPhosphoric Acid Anodized Aluminum Honeycomb
Phosphoric Acid Anodized Aluminum Honeycomb Description 02 and 06 expanded aerospace grade aluminum honeycomb materials are available in a wide selection of cell sizes and foil gauges. The HexWeb CR-PAA
More informationSan Francisco Circuits, Inc.
Your Doorway to Innovation San Francisco Circuits, Inc. Bridging Concepts with Reality Flex PCB Introduction to Flex Circuits What is Flex Circuits? From Wikipedia - a technology for assembling electronic
More informationScotch-Weld TM. Acrylic Adhesives. DP8405NS Green. Product Data Sheet. Date: March 2014 Supersedes: August 2013
Scotch-Weld TM Product Data Sheet Acrylic Adhesives Date: Supersedes: August 2013 Product Description 3M TM Scotch-Weld Acrylic Adhesives are high performance, twopart acrylic adhesives that offer good
More informationLight management for photovoltaics. Ando Kuypers, TNO Program manager Solar
Light management for photovoltaics Ando Kuypers, TNO Program manager Solar Global energy consumption: 500 ExaJoule/Year Solar irradiation on earth sphere: 5.000.000 ExaJoule/year 2 Capturing 0,01% covers
More informationUnderstanding Shielded Cable
Understanding Shielded Cable Industrial applications such as the factory floor are typically electrically noisy environments. Electrical noise, either radiated or conducted as electromagnetic interference
More informationProduct Sheet. Silicone Adhesive Sealants. RTV Silicone Adhesive Sealants
Product Sheet Silicone Adhesive Sealants Adhesives come in a wide array of chemistries each having its specialist properties and applications. In this context silicones are often referred to as sealants
More informationKALPANA INDUSTRIES LTD. TECHNICAL DATA SHEET
1 KALPANA INDUSTRIES LTD. TECHNICAL DATA SHEET KI XL - 03 / KI-SC 10 TWO COMPONENT AMBIENT CURABLE POLYETHYLENE COMPOUND FOR INSULATION OF LOW VOLTAGE POWER CABLE DESCRIPTION : KI polyethylene compound
More informationInfrared / K Thermometer Remote Temperature Measurement ( Non-Contact ) 1327K INSTRUCTION MANUAL
RS Infrared / K Thermometer Remote Temperature Measurement ( Non-Contact ) 1327K INSTRUCTION MANUAL TABLE OF CONTENTS TITLE PAGE INTRODUCTION...1. SAFETY INFORMATION...2. FEATURES...4. SPECIFICATIONS...4.
More informationGlobal cable expertise for rolling stock
Global cable expertise for rolling stock Global cable expertise for rolling stock Single and multicore Low voltage control cables Jumper cables HV roof cables (25 kv) rubber cables for power needs of locomotives
More informationLapping and Polishing Basics
Lapping and Polishing Basics Applications Laboratory Report 54 Lapping and Polishing 1.0: Introduction Lapping and polishing is a process by which material is precisely removed from a workpiece (or specimen)
More information7.0, 4 Wire Touch Panel
7.0, 4 Wire Touch Panel Product Specification PRODUCT NUMBER DTS408-0700-00 Product Mgr Quality Mgr Engineering Document Control Date: Date: Date: Date: Product No. DTS408-0700-00 REV. B Page 1 / 10 TABLE
More informationSMD High Power Precision Resistors
Key Features High precision - TCR 5ppm/ C and 10ppm/ C Tolerance down to 0.01% Thin film (nichrome) Choice of packages Stable high frequency performance Temperature range -55 C to +155 C Applications Communications
More information07 21 19 Guide Specification STAYFLEX CORROSION CONTROL AND THERMAL INSULATION SYSTEM
07 21 19 STAYFLEX CORROSION CONTROL AND THERMAL INSULATION SYSTEM 7819 Broadview Road Cleveland, OH 44131 800-522-4522 February, 2011 SPEC NOTE: This guide specification is intended for use when specifying
More informationU LED modules, converters and systems GENERAL ILLUMINATION. Umodule SPOT P330-2 umodule SPOT PHASED OUT NTC
Product description Spotlights Downlights High-flux LED module Narrow colour temperature tolerance band Compact design Excellent thermal management 1 NTC for temperature control High-power LED in chip-on-board
More information3M Scotch-Weld EPX Two-component structural adhesives and applicator guns
M Scotch-Weld EPX Two-component structural adhesives and applicator guns Innovation What is a structural adhesive? M s high-strength structural adhesives are fundamentally load-bearing formulations. Bond
More informationU LED modules, converters and systems GENERAL ILLUMINATION. Umodule SPOT P340-2 umodule SPOT PHASED OUT NTC 42.25 37 11 5.75 3.5 5.15 37.89 39.
Product description Spotlights Downlights High-flux LED module Narrow colour temperature tolerance band Compact design Excellent thermal management 1 NTC for temperature control High-power LED in chip-on-board
More informationPRODUCT PROFILE. ELECTROLOY in partnership with FCT Asia Pte Limited. in manufacturing. Nihon Superior Lead Free Solder Bar.
PRODUCT PROFILE ELECTROLOY in partnership with FCT Asia Pte Limited in manufacturing Nihon Superior Lead Free Solder Bar SN100C Product Name Product Code LEAD FREE BAR LEAD FREE BAR ( TOP UP ALLOY ) SN100C
More informationSECTION 16461 DRY-TYPE TRANSFORMERS
SECTION 16461 PART 1 - GENERAL 1.1 SECTION INCLUDES A. Furnishing and installation of and testing of cast resin dry type MV/LV distribution transformer in accordance with specifications and drawings. Any
More informationETHERLINE Ethernet Cable, Connectors & Tools
Ethernet Cable, ors & Tools 2 Pair 242 4 Pair 249 Industrial Ethernet ors & Tools 256 Ethernet Cable, ors & Tools ETHERNET CABLE, CONNECTORS & TOOLS Quick Select Chart 240 2 Pair 2 Pair: CAT.5/5e; Stationary
More informationHow To Make A Microprocessor Based Microprocessor From A Microchip
1 ACMPSGQ42014_v5.indd 1 Custom Materials RT/duroid, TMM, XT/duroid, ULTRALAM High Frequency Laminates Dielectric Constant, er @ 10 GHz Process (1) Design (11) Dissipation (1) Factor TAN d @ 10 GHz Thermal
More informationElectroplating with Photoresist Masks
Electroplating with Photoresist Masks Revised: 2014-01-17 Source: www.microchemicals.com/downloads/application_notes.html Electroplating - Basic Requirements on the Photoresist Electroplating with photoresist
More informationTAIYO PSR-4000MP LIQUID PHOTOIMAGEABLE SOLDER MASK
TAIYO PSR-4000MP LIQUID PHOTOIMAGEABLE SOLDER MASK Screen or Spray Application Dark Green, Matte Finish Excellent Solder Ball Resistance Resistance to No-Clean Flux Residue Wide Processing Window Fine
More informationSelective Soldering Defects and How to Prevent Them
Selective Soldering Defects and How to Prevent Them Gerjan Diepstraten Vitronics Soltec BV Introduction Two major issues affecting the soldering process today are the conversion to lead-free soldering
More informationPHASED OUT. LED light engine / OLED LED compact. Umodule SLE G4 6mm R SNC, SLE G4 10mm R SNC umodule SLE ESSENCE
w LED light engine / OLED Product description For general lighting application Typ. luminous flux category: 3/6/8/1,2 lm High efficacy up to 133 lm/w for the LED module at tp = 25 C Small LES (light emitting
More informationSOLAR SOLUTIONS BONDED MOUNTING TECHNOLOGY. DURABLE BONDING OF PV MODULES TO MOUNTING SYSTEMS WITH Sikasil
SOLAR BONDED MOUNTING TECHNOLOGY DURABLE BONDING OF PV MODULES TO MOUNTING SYSTEMS WITH Sikasil ADDED VALUE BY BONDING OF MODULES TO MOUNTING SYSTEMS SUITABLE IN PRODUCTION AND ON-SITE NOWADAYS PHOTOVOLTAIC
More informationPRDUCT SPECIFICATON TFT LCD MODULE Model : ELT240320ATP
PRDUCT SPECIFICATON TFT LCD MODULE Model : ELT240320ATP 2.8 inch TFT LCD with Touch Screen This specification is subject to change without notice. 2 Contents Page 1. LCM Specification.....3 2. Functional
More informationPower chip resistor size 2512 PRC221 5%; 2% FEATURES Reduced size of final equipment Low assembly costs Higher component and equipment reliability.
FEATURES Reduced size of final equipment Low assembly costs Higher component and equipment reliability. APPLICATIONS Power supplies Printers Computers Battery chargers Automotive Converters CD-ROM. QUICK
More informationDevelopment of High-Speed High-Precision Cooling Plate
Hironori Akiba Satoshi Fukuhara Ken-ichi Bandou Hidetoshi Fukuda As the thinning of semiconductor device progresses more remarkably than before, uniformity within silicon wafer comes to be strongly required
More informationMICROCABLES. A complete vision of your connectivity needs. Catalogue
MICROCABLES A complete vision of your connectivity needs Catalogue ELECTRONIC Filotex Introduction Application Nexans s line of microcables is designed towards the increasing requirements of electronics
More informationCOPPER FLEX PRODUCTS
COPPER FLEX PRODUCTS WHY FLEX? Molex ible Printed Circuit Technology is the answer to your most challenging interconnect applications. We are your total solution for ible Printed Circuitry because we design
More informationDouble Coated Urethane Foam Tapes
3 Double Coated Urethane Foam Tapes 4004 4008 4016 4026 4032 4052 4056 4085 Technical Data April, 2009 Product Description 3M Double Coated Urethane Foam Tapes are conformable foams that offer high shear
More informationThyssenKrupp Rasselstein
Quality begins with ThyssenKrupp Rasselstein Product Range ThyssenKrupp Rasselstein Your Quality Partner Page 2 ThyssenKrupp Rasselstein Product Range Quality begins with ThyssenKrupp Rasselstein ThyssenKrupp
More informationGeneral-purpose flexible circuit
The circuit board, coiled to show its flexibility, was made from six layers of a low-outgassing material for a medical device. Unusual circuits call for unusual materials Some flex circuits work in medical
More informationPRO-VAC 150-LG-75 VACUUM BAGGING FILM For low temperature cure up to 120 C
PRO-VAC 150-LG-75 VACUUM BAGGING FILM For low temperature cure up to 120 C A tough, puncture resistant co-extrusion of polyolefin and nylon based resins which are designed for use in the production of
More informationUniprise Solutions COAX 101. White Paper. www.commscope.com
Uniprise Solutions COAX 101 White Paper www.commscope.com Structured cable systems have very thorough standards for fiber optic and twisted pair installations. The cabling components and installed systems
More informationC A B L E P R O T E C T I O N
Safe cable protection! Elematic Cabling Systems produces in own plants a wide range of products for the cable protection, such as wiring spirals, insulated tubing, heat shrinkable tubing, etc. These products
More informationHigh Ohmic (up to 68 MΩ)/ High Voltage (up to 10 kv) Resistors
High Ohmic (up to 68 MΩ)/ A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded to the end-caps.
More informationDESIGN GUIDELINES FOR LTCC
DESIGN GUIDELINES FOR LTCC HERALOCK HL2000 MATERIALS SYSTEM Preliminary Guideline Release 1.0 CONTENTS 1. INTRODUCTION 1.1. GLOSSARY OF TERMS 1.2. LTCC PROCESS FLOW DIAGRAM 1.3. UNITS OF MEASURE 2. PROCESSING
More informationMIROX 3G ENVIRONMENTALLY- FRIENDLY MIRROR
MIROX 3G ENVIRONMENTALLY- FRIENDLY MIRROR One step closer to perfection MIROX 3G is a unique product and AGC Flat Glass Europe holds the exclusive patent for the manufacturing process. It is the third
More informationDenco Sales Aspire Catalog
Denco Sales Aspire Catalog This catalog is a product reference guide. For more detailed information, inventory availability, pricing, data sheets, printing profiles and more click here to go to the Denco
More informationCABLE SPECIFICATION CAN CAB RJ45-SUBD9
CABLE SPECIFICATION All technical information contained in this document is the exclusive property of STI and may neither be used nor disclosed without its prior written consent. AAV 33801 1/8 Connector
More informationFLEXIBLE COPPER & ALUMINIUM CONNECTIONS. Product Range 1 VGL - ALLIED CONNECTORS
Product Range ROUND STRANDED COPPER CABLE Electrolytic Copper / Oxygen Free Copper Conforms to DIN 46438 Standards Finish: Bare Copper / Tinned / Silver-plated ROUND BRAID / ROUND STRANDED CABLE WITH OVERALL
More informationFlocking of textiles. Flocked shirt 13. flocking drying cleaning. adhesive. application. creation
Flocking of textiles > The motif flocking is the high-class alternative to textile printing. One not only flocks sports wear for schools, sport clubs, associations etc., but also fabrics for garments,
More informationSAND CAST CHILL CAST LM4 - TF
1 This alloy conforms with British Standards 1490 and is similar to the obsolete specifications BS.L79 and D.T.D 424A. Castings may be in the cast (M) of fully heat treated (TF) conditions. CHEMICAL COMPOSITION
More informationFlexible Mehrlagen-Schaltungen in Dünnschichttechnik:
Flexible Mehrlagen-Schaltungen in Dünnschichttechnik: Technologie-Plattform für Intelligente Implantate A. Kaiser, S. Löffler, K. Rueß, P. Matej, C. Herbort, B. Holl, G. Bauböck Cicor Advanced Microelectronics
More information