Townsend Bearings. Flexco Belt Fastener Systems. Revision 1

Transcription

1 Townsend Bearings Flexco Belt Fastener Systems Revision 1

2 X1189 Mechanical Belt Fastener Advantages Repair mechanical belt splices in minutes, unlike vulcanized splices which can take hours or days. Easy Installation It s impossible to claim that vulcanization offers any advantage over mechanical fasteners in terms of easy installation. Mechanical fasteners can be installed on-site and typically only requires one installer with basic technical skills. Vulcanization is a long, involved process that often requires trained outside contractors who may have to do the job off-site. Flexco Quick Installation Depending on the belt width and fastener selected, a belt can respliced with a reliable belt fastener from Flexco in approximately 20 minutes. Vulcanization can take hours or even days. Quicker installation means less downtime and greater productivity. Economically Smart It is less expensive to install a mechanical belt splice than a vulcanized splice. Remove Belts Easily Hinge pins can be removed from mechanical splices, allowing the belt to be separated for easy cleaning, installation and removal. This advantage isn t offered by vulcanization. Proactive Maintenance Because a mechanical splice is visible, any wear or deterioration is immediately apparent. Replacement or repairs can be scheduled during brief periods of downtime or at the end of a shift. A deteriorating vulcanized splice, in comparison, is not easily detected. Catastrophic line failure can be the first indication of trouble once adhesion breakdown occurs inside a vulcanized splice. Mechanical Fastener Systems from Flexco Flexco is undeniably the leader in mechanical belt fastener systems. Additional information regarding time-proven products such as Clipper and Alligator fastener systems can be found on the back of this brochure.

3 Mechanical Fastener Solutions from Flexco Clipper Wire Hook System Clipper hooks produce a low-profile, economical splice. What sets the Clipper splice apart is that the splice is machine applied for consistency and ease of installation. Clipper offers a variety of lacers available for on-site maintenance repairs, production lacing or for other special application needs. Clipper hooks are designed for belts up to 13/32" (10mm) and are available in a wide array of sizes, configurations and metal types. Alligator Ready Set Staple Fastener System The Alligator Ready Set Staple Fastener system is a strong and abrasion resistant splice. Installation is simple: Fit the Ready Set fastener strip onto the belt end, insert into the special installation tool, and drive the staples with a hammer for a strong, dependable splice. Ready Set fasteners are designed for belts from 1/16 (1.5mm) to 1/4" (6.4mm) thick. Alligator Belt Lacing Fastener System Alligator Belt Lacing is a hammer applied splice that does not require any special installation tools. Ideal for low-volume users and designed for belts up to 1/2" (13mm) thick. Alligator lacing is available in continuous lengths to fit any belt width. Alligator Plastic Rivet Fastener System For applications where metal fasteners can t be used, the Alligator Plastic Rivet splice is a non-metallic splice that can be installed on-site with simple installation tools. Alligator Plastic Rivet allows the user to enjoy the advantages of both a mechanical splice and a non-metallic splice (non-abrasive, non-marking, FDA accepted). Designed for belts up to 1/8" (3.2mm). Flexible Steel Lacing Company 2525 Wisconsin Avenue Downers Grove, IL U.S.A. Telephone: (630) Fax: (630) [email protected] Visit our Web site at: Australia: England: Germany: Mexico: New Zealand: Republic of South Africa: Flexible Steel Lacing Company Lit Code 1888 Clipper and Alligator are registered trademarks and Ready Set is a trademark of Flexible Steel Lacing Company.

4 Alligator Conveyor Belt Lacing Fastener System AL200 Market applications Package/Parts Conveying Food/Sanitary Contact Agricultural Harvesting/Handling Recycling/Scrap Handling Wood Products For easy, economical installation and an exceptionally smooth joint, choose the Alligator Conveyor Belt Lacing System. Alligator Lacing is available in continuous lengths to fit any belt width and the onepiece design provides uniform tension across the full belt width. The one-piece fastener strip also ensures that there are no loose pieces to work themselves out of the belt and into the conveyed product. Designed for belts from 1/32" (.8 mm) to 1/2" (12.5 mm), Alligator Belt Lacing installation requires no special tools, only a hammer. The lacing is secured with teeth that embed lengthwise on the belt, providing a strong, vise-like hold. Clips hold gauge rod and lacing firmly and squarely against the belt and ensures a strong, straight splice. The straight splice also helps ease hinge pin insertion. Alligator Alligator Conveyor Belt Lacing Selection Chart Lacing Size For Belts With Mechanical Fastener Ratings Up To: P.I.W. kn/m Belt Thickness Range in. mm Recommended Minimum Pulley Diameter Up thru 1/16 Up thru / /16-3/ /2 38 1/ /32-9/ / /8-5/ /2 64 3/ /32-3/ / /16-7/ / /32-9/ / /32-5/ / /16-3/ / /8-7/ / /16-1/ / in. mm Approx. Corrugated Hinge Pin Diameter in. mm Strip Length in. mm

5 Alligator Conveyor Belt Lacing Fasteners Alligator Belt Lacing is available in steel or stainless steel. Steel Steel is the standard fastener material. It is suitable for most applications, and is plated for rust and corrosion resistance. 300 Series Stainless Steel 300 Series stainless steel is non-rusting and displays extra resistance to abrasion, acids, chemicals, and magnetic attraction. It is excellent in applications with high sanitation requirements. Corrugated Hinge Pins H Corrugated The corrugated pin is standard and is suitable for all sizes of Alligator Belt Lacing and for smaller transmission belt lacing applications. Lugs on the hinge pin engage lacing loops, reducing the possibility of hinge pin migration. Available in steel (H) or stainless steel (SH). Steel Lacing with steel corrugated hinge pins Carton contains 4 sets of lacing, 4 corrugated hinge pins, and 1 installation gauge pin with clips. Belt Width in. mm 00 1A A A A A A A A A Stainless Lacing with stainless corrugated hinge pins Carton contains 4 sets of lacing, 4 corrugated hinge pins, and 1 installation gauge pin with clips. Belt Width in. mm 00S 1S 7S 15S 20S 25S 27S 35S 45S S-12 1S-12 7S-12 15S-12 20S-12 25S-12 27S-12 35S-12 45S S-18 1S-18 7S-18 15S-18 20S-18 25S-18 27S-18 35S-18 45S S-24 1S-24 7S-24 15S-24 20S-24 25S-24 27S-24 35S-24 45S S-30 1S-30 7S-30 15S-30 20S-30 25S-30 27S-30 35S-30 45S S-36 1S-36 7S-36 15S-36 20S-36 25S-36 27S-36 35S-36 45S S-42 1S-42 7S-42 15S-42 20S-42 25S-42 27S-42 35S-42 45S S-48 1S-48 7S-48 15S-48 20S-48 25S-48 27S-48 35S-48 45S S-60 1S-60 7S-60 15S-60 20S-60 25S-60 27S-60 35S-60

6 Alligator Conveyor Belt Lacing Transmission Belt Lacing For flat power-transmission belts up to 12" (300 mm) wide, Alligator Transmission Belt Lacing is available for sizes 00 through 65. Lacing is scored so it can be easily trimmed to fit narrower belts. Corrugated hinge pins are furnished with the three smallest lacing sizes. A two-piece Rocker Hinge pin is available for sizes 15 to 65. Boxes contain 12" (300 mm) lacing strips (except Nos. 00 and 1 & 7 which contain 6" [150 mm] strips), hinge pins, and 1 gauge pin. Four or six joints per box. Transmission Belt Lacing Belt Width 300 Series Steel in. mm Stainless S A 1AS S S S D 25DS K 27KS N 35NS U 45US W 55WS X Rocker Hinge Pin RH Rocker The Rocker Hinge pin is furnished with Transmission Belt Lacing. The two-piece pin provides rocking action to reduce friction and wear on loops and lacing. Sizes 15 through 65 are available in steel (RH) or stainless steel (SRH).

7 Alligator Conveyor Belt Lacing Clipper 845LD Belt Cutter The Clipper 845LD aluminum belt cutter delivers the straightest cuts time after time in an easy-to use lightweight, corrosion-resistant package. The chain-driven, double-edged safety blade can be driven from either end, cutting in a single pass. Cuts straight every time on rubber or PVC belts up to 1/2" (12 mm) thick. Plus, the aluminum frame makes the 845LD easy to carry and use. Clipper 845LD Belt Cutter Belt widths up to: Description in. mm " Belt Cutter LD " Belt Cutter LD " Belt Cutter LD " Belt Cutter LD Hand Skiver Our hand-held skiver makes it easy to remove impression covers prior to fastener size selection and installation. Allows fasteners to be installed closer to the belt carcass for a lower profile. Belt Nippers Notches belt ends quickly and easily to help avoid splice hang-up. Belt Nippers BN-1 Hand Skiver RTBS Rough Top Skiver Australia: England: Germany: Mexico: New Zealand: Republic of South Africa: Flexible Steel Lacing Company 2525 Wisconsin Avenue Downers Grove, IL U.S.A. Telephone: (630) Fax: (630) [email protected] Visit our Web site at: Flexible Steel Lacing Company. 7/03, Part#X0728 Alligator and Clipper are registered trademarks of Flexible Steel Lacing Company.

8 Flexco Bolt Hinged Fastener System BH200 No. 375X No. 550 Sturdy hinged construction makes Flexco Bolt Hinged fasteners ideal for applications that use smaller pulleys, but still require a high-strength, dependable splice. A choice of sizes accommodate belts from 1/4" (6 mm) to 5/8" (16 mm) thick. Versatile, easy-to-install design For belt conveyor applications subject to frequent length adjustments, the Bolt Hinged fastener is easy to install and re-install. The joint can be separated simply by removing the hinge pin. On-site installation requires hand or power tools. Our exclusive piloted bolt also simplifies installation and holds fastener plates firmly in place. For added strength and pull-out resistance, specially formed teeth penetrate deep into the belt carcass without damaging carcass fibers. Flexco Exclusive tapered tip cradles nuts securely in place. Easy to use. Reduces installation time. Market applications Construction and Road Equipment Coal Salt Potash Grain Wood Products Recycling Flexco Bolt Hinged Fastener Selection Guide Fastener Size Belt Thickness Range For Belts with Mechanical Fastener Ratings Up To: Recommended Minimum Pulley Diameter (Operating Tension 75% -100% of Belt Rating) in. mm P.I.W. kn/m in. mm 375X 1/4-13/ /4-5/

9 Flexco Bolt Hinged Fastener System J Carton Complete Fastener Joint Each J carton includes one complete belt joint for belt widths from 12" (300 mm) to 60" (1500 mm). Each carton includes: 2 Fastener Strips 1 Gauge Pin 1 Hinge Pin 2 Hinge Pin Washers Filler Tubing Required Piloted Bolts, Nuts, and Clips 375X Fasteners Belt Width NC Steel Joint NCS Steel Joint SC Steel Joint SSC Stainless Joint with Nylon Covered with Nylon Covered with Bare with Bare in. mm Steel Cable * Stainless Cable * Steel Cable * Stainless Cable ** XJ18NC 375XJ18NCS XJ24NC 375XJ24NCS 375XJ24SC 375XSJ24SSC XJ30NC 375XJ30NCS 375XSJ30SSC XJ36NC 375XJ36NCS 375XJ36SC 375XSJ36SSC XJ42NC 375XJ42NCS 375XSJ42SSC XJ48NC 375XJ48NCS 375XJ48SC 375XSJ48SSC XJ60NC 375XSJ60SSC 550 Fasteners Belt Width NC Steel Joint NCS Steel Joint SC Steel Joint SSC Steel Joint with Nylon Covered with Nylon Covered with Bare with Bare in. mm Steel Cable * Stainless Cable * Steel Cable * Stainless Cable ** J18NC J24NC 550J24NCS 550J24SC 550J24SSC J30NC 550J30NCS 550J30SC 550J30SSC J36NC 550J36NCS 550J36SC 550J36SSC J42NC 550J42NCS 550J42SC 550J42SSC J48NC 550J48NCS 550J48SC 550J48SSC J60NC * J CARTON Continuous Strip w/steel Nuts & Bolts ** J CARTON Continuous Strip w/stainless Nuts & Bolts For additional Bolt Hinged offerings, please contact Flexco or your local Flexco distributor.

10 Flexco Bolt Hinged Fastener System Extra Hinge Pins For 375X and 550 Belt Width NC (1 4" dia.) NCS (1 4" dia.) SC (1 4" dia.) SSC (7 32" dia.) Nylon Covered Steel Cable Nylon Covered Stainless Cable* Bare Steel Cable Bare Stainless Cable* in. mm Each Package Each Package Each Package Each Package (One Pin) (Ten Pins) (One Pin) (Ten Pins) (One Pin) (Ten Pins) (One Pin) (Ten Pins) NC-18-1 NC-18 NCS NC-24-1 NC-24 NCS-24-1 NCS-24 SC-24-1 SC-24 SSC-24-1 SSC NC-30-1 NC-30 NCS-30-1 NCS-30 SC-30-1 SC-30 SSC-30-1 SSC NC-36-1 NC-36 NCS-36-1 NCS-36 SC-36-1 SC-36 SSC-36-1 SSC NC-42-1 NC-42 NCS-42-1 NCS-42 SC-42-1 SC-42 SSC-42-1 SSC NC-48-1 NC-48 NCS-48-1 NCS-48 SC-48-1 SC-48 SSC-48-1 SSC NC-60-1 NC-60 NCS-60-1 NCS-60 * 300 Series NC Nylon Covered Steel Cable Nylon covering reduces corrosion and simplifies hinge pin insertion. SC Bare Steel Cable Recommended for abrasive or gritty material conveyance. NCS Nylon Covered Stainless Steel Cable For greater corrosion resistance. SSC Bare 300 Series Stainless Steel Cable For conditions where corrosion attacks ordinary steel pins. Extra piloted bolts and nuts Replacement piloted bolts and nuts are packaged separately, 100 per box. Extra Piloted Bolts Extra Nuts For Fastener Stainless Steel 300 Series For Fastener Stainless Steel 300 Series 375X X * * * Slotted Nuts Plastic filler tubing reduces sifting Flexco Plastic Filler Tubing is furnished in all J cartons, and keeps sifting of fine materials through the hinged joint to a minimum. It is included with every J carton and is sold by the 100-foot reel. Filler Tubing Description Qty. 375X / '/Pkg

11 Flexco Bolt Hinged Installation Tools and Supplies The only tools needed for Bolt Hinged fastener installation are the portable hand tools or power tools and the Flexco Bolt Hinged Curved Templet described here. Hand Installation Tools Description For Fastener Punch 375X & 550 P1P Boring Bit 375X & 550 B1B Wrench 375X & * S1S** * For use with Steel No. 375X or Steel No. 550 nuts. ** For use with Stainless No. 375X or Stainless No. 550 nuts. Power Installation Tools Description For Fastener Power Punch 375X & 550 HP1 Power Boring Bit 375X & 550 HB1 Power Wrench 375X & 550 H100* HW1** Quick Change 375X & Chuck * For use with Steel No. 375X or Steel No. 550 nuts. ** For use with Stainless No. 375X or Stainless No. 550 nuts. Hand Tools Bolt Breaker Description For Fastener Bolt Breaker 1, 140, 190 & RP1 110 (Two Per Package) 1-1/2, 2, 2-1/4 & RP /2 & Bolt Breaker Power Tools Curved Templets Our specially designed curved templet ensures accurate placement of punched or drilled holes. Using the templet also ensures a precise concave cut to provide uniform tension across full belt end and minimize the potential for splice edge failure. Curved Templets Belt Width in. mm 375X X X X X X X X Australia: England: Germany: Mexico: New Zealand: Republic of South Africa: Flexible Steel Lacing Company 2525 Wisconsin Avenue Downers Grove, IL U.S.A. Telephone: (630) Fax: (630) [email protected] Visit our Web site at: Flexible Steel Lacing Company. 7/03, Part#X0745 Flexco is a registered trademark of Flexible Steel Lacing Company.

12 CH235 Clipper Unibar Fasteners Market applications Package and Parts Handling Food Processing General Manufacturing Agriculture Filter Media Simpler handling and faster installation Unibar fasteners feature performanceproven Clipper hooks welded to a common bar. Unibar fasteners offer many advantages including: Hook legs are held parallel, which eases the meshing of belt ends and the insertion of connecting pins. Strips are easy to handle and install. The welded bar creates a flat finished splice to eliminate belt wave. The risk of a single hook dislodging from the strip is virtually eliminated. Under abusive, severe-duty applications, Unibar spreads shock loads to help protect individual hooks. The Safety Strip keeps hook points covered to protect the user s fingers and eliminate tangling prior to installation. Unibar fasteners can be trimmed to appropriate lengths or ordered in special lengths up to 60" (1500 mm). Clipper

13 Clipper Unibar Fasteners The easy-to-install alternative to vulcanization Unlike the vulcanization process that can take hours to complete, Unibar fasteners are a smart, time-saving alternative. One person using an easy-tooperate lacer can install Unibar fasteners on-site in a fraction of the time it would take to vulcanize a belt. That means the cost of downtime associated with vulcanization is almost entirely eliminated. The welded common bar secures individual hooks to form a continuous strip. This virtually eliminates any risk of a single hook dislodging. Unibar Series Hooks Without pins. 12" (300 mm) length strips. 430 Stainless Steel UX-1SP UX-1 UX-1LLSP UX-1LL U2SP U2 U3 U4 U5 U6 U7 Coated Steel U2SP U2 U3 U4 U5 U6 316 Stainless Steel UCM36 SLXSP UCM36 SLSP UCM36 XSP UCM36 SP UCM36 UCM36LP UCM36LLSP UCM36LL UX-1SP UX-1 UX-1LLSP UX-1LL U2 U3 U4 U5 Hook Size (Box of 12) UX1SPS12 UX1S12 UX1LLSPS12 UX1LLS12 U2SPS12 U2S12 U3S12 U4S12 U5S12 U6S12 U7S12 U2SPC12 U2C12 U3C12 U4C12 U5C12 U6C12 UCM36SLXSPSS12 UCM36SLSPSS12 UCM36XSPSS12 UCM36SPSS12 UCM36SS12 UCM36LPSS12 UCM36LLSPSS12 UCM36LLSS12 UX1SPSS12 UX1SS12 UX1LLSPSS12 UX1LLSS12 U2SS12 U3SS12 U4SS12 U5SS12 Note: Most sizes available in 24" (600 mm) lengths. Lengths 4"-60" ( mm) can be custom ordered.

14 Clipper Unibar Fasteners Connecting Pins Choose from a wide selection of connecting pins. Each is specially engineered to provide long pin life and minimal wear to fastener loops. Connecting pins are available in the conveniently packaged, easy-to-dispense 100 ft. (30 M) Pin Pak and in various coil lengths. Pin Pak ft. (30 M) of connecting pin with dispenser. Pin Dia. in. mm DuraStainless Nylosteel Nylostainless DSS065-C NY065-C NYS065-C DSS093-C NY093-C NYS093-C DSS109-C NY109-C NYS109-C NY125-C NYS125-C NY156-C NYS156-C Connecting Pins in Coils 25 ft. (7.5 M) minimum coil length. Pin Dia. in. mm DuraStainless Nylosteel Nylostainless DSS065 NY065 NYS DSS093 NY093 NYS DSS109 NY109 NYS NY125 NYS NY156 NYS156 Clipper Connecting Pin Specifications Pin Diameter Clipper Hook Size.065" (1/16").093" (3/32").109" (7/64").125" (1/8").156" (5/32") 1.7 mm 2.4 mm 2.8 mm 3.2 mm 4.0 mm UCM36 s, U2SP, U2, U4 U5 U6 & U7 UX-1 s U3-1, U3-2, U3 Clipper Connecting Pin Materials and Characteristics Abbreviation Pin Wear Factor Hook Wear Factor Rigidity Magnetic Flexibility Composition DuraStainless DSS Excellent Excellent Good Slightly Fair Wear-resistant nylon and 316SS spring wire Nylosteel NY Good Good Good Yes Fair Nylon and music wire Nylostainless NYS Good Good Good Slightly Fair Nylon and 316SS spring wire

15 Clipper Unibar Fasteners Roller Lacer Roller Lacer technology sets Clipper apart from all other light-duty fasteners. The Roller Lacer delivers optimum clinch and guaranteed uniform splicing. Its speed, accuracy and ease-of-use is unmatched. Using the Roller Lacer is a simple operation that requires only one person even with wide belts. The Roller Lacer drives across the width of the splice, embedding each individual hook with clean penetration and consistency. Microlacer The Microlacer is the lightweight, easy-tooperate solution for lacing belts on-site, and it creates a quality, long-lasting splice in minutes. Use it to lace belts up to 14" (350 mm) wide in one operation. Wider belts can be laced in multiple operations with the continuous lacing feature. Roller Lacer Does not include face strips purchase separately. Lacer Width in. mm Standard Lacer Steel Head Lacer RL-24 SHRL RL-36 SHRL RL-48 SHRL RL-60 SHRL-60 Roller Lacer Face Strips Includes one lacer pin. Belt Width in. mm For Hook Size: UCM FS FS FS FS36-60 For Hook Size: UX FS FS FS FS1-60 For Hook Size: U2SP-U FS FS FS FS2-60 For Hook Size: U4-U FS4-1/ FS4-1/ FS4-1/ FS4-1/2-60 Australia: England: Germany: Mexico: New Zealand: Republic of South Africa: Flexible Steel Lacing Company. 7/03, Part#X0738 Coated Steel, DuraStainless, and Pin Pak are trademarks and Clipper, Microlacer, Roller Lacer and Unibar are registered trademarks of Flexible Steel Lacing Company. Microlacer Does not include face strips purchase separately. Lacer Width in. mm Microlacer Microlacer Face Strips Includes one lacer pin. For Hook Size: UCM36 UX-1 FS36-MICRO FS1-MICRO U2-U3 FS2-MICRO U4, U7 FS4-1/2-MICRO Flexible Steel Lacing Company 2525 Wisconsin Avenue Downers Grove, IL U.S.A. Telephone: (630) Fax: (630) [email protected] Visit our Web site at:

16 CH225 Clipper Vise Lacer The Clipper Vise Lacer is the ideal lacing tool for the user with only a few conveyor belts, while providing the reliability and performance of a machine splice. It is also easy to use and inexpensive. Simply place the lacer in a vise, load the hooks, insert the belt, and close the vise. The exclusive built-in pressure plate ensures a consistent clinch for long-lasting splices. And the Acusteel Hook Retainer produces an optimal loop profile for maximum splice performance. Clipper Vise Lacers are available for all series of Clipper hook sizes in widths up to 10" (250 mm). Wider belts can be laced in multiple operations with the easy-to-use continuous lacing feature. Market applications Agriculture Food processing Bowling alleys Laundry & textiles General manufacturing Vise Lacer Tool Width For Hook Size: in. mm 2-7, U2SP-U R-4 2-7, U2SP-U R-7 2-7, U2SP-U R-10 1, UX VL-7 25* VL-6 30, 36, UCM VL-7 *25 Lacers have a slightly different construction. Australia: England: Germany: Mexico: New Zealand: Republic of South Africa: Flexible Steel Lacing Company 2525 Wisconsin Avenue Downers Grove, IL U.S.A. Telephone: (630) Fax: (630) [email protected] Visit our Web site at: Flexible Steel Lacing Company. 7/03, Part#X0734 Acusteel is a trademark and Clipper is a registered trademark of Flexible Steel Lacing Company.

17 Everdur Fasteners SP201 Fastener Size Bolt Solid Plate Bolt Hinged Everdur Bolt Solid Plate Information E Box 25 Fastener Sets For Belts with Belt Minimum Mechanical Fastener Thickness Pulley Ratings Up To: Range Diameter A safer fastener solution from the top name in fastener systems For conveyor belts used in hazardous grain elevator environments, Flexco strongly recommends Everdur fasteners a safer product that gives you protection and peace of mind. Spark-free, when compared to steel, Everdur fasteners are made from a tough copper and silicon alloy, so they are ideal for conveyor belts in dusty grain elevator applications. Plus, Everdur fasteners are long-wearing for extended service life on the job, and are non-magnetic so they can be used on belts employing magnetic pulleys or separators. Simple, economical installation Flexco Everdur fasteners are also easy to install. Regular maintenance personnel can install a splice in a fraction of the time and at a fraction of the cost required for vulcanized splices. Choose from a wide variety of available sizes to match solid plate or hinged fastener styles to your application. Hinged Everdur fasteners feature a spark-free hinge pin made from nylon-covered bronzed cable. Fasteners Required for Belt Width P.I.W. kn/m in. mm in. mm 18" 24" 30" 36" 42" 48" 60" /16-7/ EE /16-7/ EE /16-9/ EE / /16-11/ /2EE /16-13/ EE / / / /4EE Everdur Fasteners Everdur Bolt Hinged Information J Cartons Continuous Strip One Complete Splice per Carton Belt Width in. mm XEJ18NB XEJ24NB XEJ30NB XEJ36NB XEJ42NB

18 More belt conveyor solutions from Flexco Far-Pul HD Belt Clamps Lightweight, easy-to-use belt clamps are adjustable to a wide variety of belt widths. They hold the belt securely in place during routine repairs. The clamps are rated at a 3-ton (2.7 metric ton) load capacity when used with two 1 1/2-ton come-alongs. Plus, their unique design provides for even tensioning and a non-slip grip across the entire belt width. 840 Series Belt Cutter This heavy-duty aluminum belt cutter features an innovative design that simplifies straight cuts on PVC or rubber belts up to 1" (25 mm) thick. Designed for simplicity and versatility, the 840 Belt Cutter from Flexco is lightweight, has a non-corrosive aluminum frame, and features a double-edged safety blade that can be chain-driven in either direction. Persuader Conveyor Belt Positioner Simple, reliable solution to belt mistracking problems. The Persuader forces the return belt into the correct path and holds it there. In many applications only a single Persuader is needed to keep belts consistently on track. Easy installation with immediate results. Flex-Lok Conveyor Skirt Clamps Easy and effective solution for loading-point spillage. Flex-Lok features an exclusive clamp-pin design that simplifies oneperson skirt adjustment or replacement. It can be installed on perpendicular and vertical skirt boards and is also available as Mini Flex-Lok for confined space applications. Australia: England: Germany: Mexico: New Zealand: Republic of South Africa: Flexible Steel Lacing Company 2525 Wisconsin Avenue Downers Grove, IL U.S.A. Telephone: (630) Fax: (630) [email protected] Visit our Web site at: Flexible Steel Lacing Company. 2/00-10, Part#X0703 Far-Pul, HD and Flexco are registered trademarks, and Persuader and Flex-Lok are trademarks of Flexible Steel Lacing Company.

19 Alligator Multiple Rivet Installation Tool AR210 The Alligator Multiple Rivet Installation Tool makes it easy to install hundreds of Alligator Rivet splices a year. NOTE: When using the pneumatic punch, air pressure not to exceed 85 psi. Take advantage of a time- and labor-saving solution that makes installation of our heavy-duty baler Alligator Rivet belt splice easier than ever. The Alligator Multiple Rivet Installation Tool features include a forged, heat-treated pneumatic punch and a durable, impactresistant guide block. Combined with a medium-stroke air hammer, these tools help you set up and finish splices quickly, and ensure proper splice compression. Best of all, they reduce the fatigue of hammering. The tool also features belt stops to ensure clear hinge-pin insertion, cam levers to clamp belts securely in place, and prominent markings to simplify alignment of popular belt widths. Alligator Rivet Alligator Rivet Specifications Operating Belt Thickness Pulley Approximate Hinge Tension Range Diameter Pin Diameter P.I.W. kn/m in. mm in. mm in. mm / / /

20 Alligator Rivet Fastening System Alligator Multiple Rivet Installation Tool The Alligator Multiple Rivet Installation Tool features a forged, heat-treated pneumatic punch and a durable, impact-resistant guide block. Includes tool with guide block, pneumatic punch and hand punch. NOTE: When using the pneumatic punch, air pressure not to exceed 85 psi. Muliple Rivet Installation Tool in. mm MART MART-14 Replacement Parts Pneumatic Punch AR1P Alligator Rivet Fasteners Alligator Rivet fasteners accommodate belts from 1/8" to 7/32" thick and are available in precut lengths from 4" to 14" (100mm to 350mm). Each package includes fasteners, rivets and hinge pins for two complete splices. Fasteners Belt Widths in. mm ARJ4/ ARJ6/ ARJ7/ ARJ10/ ARJ14/350 Replacement Hinge Pins 300 Series Stainless Spring Wire Belt Widths Qty. in. mm Pkg ARSSI-4/ ARSSI-6/ ARSSI-7/ ARSSI-10/ ARSSI-14/350 4 Steel Corrugated Belt Widths Qty. Pkg. in. mm ARSH4/ ARSH6/ ARSH7/ ARSH10/ ARSH14/350 4 Extra Rivets Description 15 / Pkg. AR3-15 Complete Tool Kits Each kit includes an installation tool, guide block w/screw, two pneumatic punches, hand punch and air hammer. Packaged in a durable plastic tool box. NOTE: When using the pneumatic punch, air pressure not to exceed 85 psi. in. mm MARTK MARTK-14 Flexible Steel Lacing Company 2525 Wisconsin Avenue Downers Grove, IL U.S.A. Telephone: (630) Fax: (630) [email protected] Visit our Web site at: Australia: England: Germany: Mexico: New Zealand: Republic of South Africa: Flexible Steel Lacing Company. 8/01-5, Part# X0763 Alligator is a registered trademark of Flexible Steel Lacing Company.

21 Alligator Quad Staple Driver AS210 Take advantage of a time and labor saving solution that makes installation of Alligator Ready Set staple fasteners easier than ever. The new Alligator Ready Set Quad Staple Driver allows for the installation of four staples at one time. Using a 2 lb. hammer, this durable, heat-treated steel quad drive rod allows installers to cut their installation time by 50%. The Quad Staple Driver features a wider striking surface to facilitate installation. Quicker installation of Alligator Ready Set reduces downtime and increases performance. Alligator Alligator Quad Saple Driver ST6-9 The Quad Staple Driver makes the installation of Alligator Ready Set that much easier. Market Applications Package/Parts Conveying Food/Sanitary Contact Agricultural Harvesting/Handling Recycling/Scrap Handling Wood Products Australia: England: Germany: Mexico: Republic of South Africa: Flexible Steel Lacing Company 2525 Wisconsin Avenue Downers Grove, IL U.S.A. Telephone: (630) Fax: (630) [email protected] Visit our Web site at: Flexible Steel Lacing Company. 3/05-2.5, Part#X2007 Alligator is a registered trademark and Ready Set and Quad Staple Driver are trademarks of Flexible Steel Lacing Company

22 Alligator Ready Set Staple Fastener System AS200 The Alligator Ready Set Staple Fastener System is ideal for a wide variety of lightand medium-duty fastener applications. The system features one-piece fastener strips with pre-inserted staples that speed installation and keep downtime to a minimum. Quick, easy installation Designed for belts from 1/16" (1.5 mm) to 1/4" (6.4 mm), Alligator Ready Set installation is easy with a portable, lightweight application tool that is easily carried to the job for on-site installation. Simply fit the fastener strip onto the belt end and secure with the special installation tool, then drive and finish set the staples for a strong, longlasting splice. Market applications Package/Parts Conveying Food/Sanitary Contact Agricultural Harvesting/Handling Recycling/Scrap Handling Wood Products Alligator Ready Set Alligator Ready Set Staple Fastener Selection Guide For Belts With Mechanical Fastener Ratings Up To: Belt Thickness Range Recommended Minimum Pulley Diameter Fastener Size No. P.I.W. kn/m in. mm in. mm RS /16-1/ RS /8-3/ RS /16-1/

23 Alligator Ready Set Staple Fastener System Fasteners A variety of fastener sizes and metals are available for joining belts in a wide range of light- to medium-duty applications. Steel The standard fastener material; suitable for most applications. Stainless Steel 300 Series stainless steel provides extra resistance to abrasion, magnetic attraction, and corrosion from acids and other chemicals. Fasteners (One carton contains 4 fastener sets, 4 hinge pins, and required amount of retaining washers.) Belt Width in. mm Steel With Nylon Covered Steel Cable Pins (NC) Stainless (300 Series) With Stainless Spring Wire Pins (SS) Stainless (300 Series) With Nylon Covered Stainless Cable Pins (NCS) RS RS62J12/300NC RS62SJ12/300SS RS62SJ12/300NCS RS62J18/450NC RS62SJ18/450SS RS62SJ18/450NCS RS62J24/600NC RS62SJ24/600SS RS62SJ24/600NCS RS62J30/750NC RS62SJ30/750SS RS62SJ30/750NCS RS62J36/900NC RS62SJ36/900SS RS62SJ36/900NCS RS62J42NC RS62SJ42SS RS62J48NC RS62SJ48SS RS62SJ48NCS RS62J60NC RS62SJ60SS RS62SJ60NCS RS RS125J12/300NC RS125SJ12/300SS RS125SJ12/300NCS RS125J18/450NC RS125SJ18/450SS RS125SJ18/450NCS RS125J24/600NC RS125SJ24/600SS RS125SJ24/600NCS RS125J30/750NC RS125SJ30/750SS RS125SJ30/750NCS RS125J36/900NC RS125SJ36/900SS RS125SJ36/900NCS RS125J42NC RS125SJ42SS RS125SJ42NCS RS125J48NC RS125SJ48SS RS125SJ48NCS RS125J60NC RS125SJ60SS RS125SJ60NCS RS RS187J12/300NC RS187SJ12/300SS RS187SJ12/300NCS RS187J18/450NC RS187SJ18/450SS RS187SJ18/450NCS RS187J24/600NC RS187SJ24/600SS RS187SJ24/600NCS RS187J30/750NC RS187SJ30/750SS RS187SJ30/750NCS RS187J36/900NC RS187SJ36/900SS RS187SJ36/900NCS RS187J42NC RS187SJ42SS RS187SJ42NCS RS187J48NC RS187SJ48SS RS187SJ48NCS RS187J60NC RS187SJ60SS RS187SJ60NCS

24 Alligator Ready Set Staple Fastener System Hinge Pins Match our selection of hinge pins to the special needs of your application. NC - Nylon Covered Steel Cable For use with steel fasteners, NC hinge pins are recommended for troughing or flat belt conveyors. NCS - Nylon Covered Stainless Steel Cable For extra resistance to abrasion. SS - Stainless Steel Spring Wire For use with stainless steel fasteners. NC - Nylon Covered Steel Cable NCS - Nylon Covered Stainless Steel Cable SS - Stainless Steel Spring Wire Hinge Pins Pin material is offered in 10' (3 M) coils ( X ) or 100' (30 M) reels ( C ). Coil Length NC NCS Nylon Covered Nylon Covered Steel Cable Stainless Cable Foot M RS NC62-X NCS62-X NC62-C NCS62-C RS NC1-X NCS1-X NC1-C NCS1-C RS NC187-X NCS187-X NC187-C NCS187-C Hinge Pin Retaining Washers Eliminate problems associated with hinge-pin migration with easy-to-install retaining washers. For Fastener RET RET RET-50 Box of 50 washers. Packages of 10 pins. SS Belt Width 300 Series in. mm Stainless Spring Wire Pins RS SS62-12/ SS62-18/ SS62-24/ SS62-30/ SS62-36/ SS SS SS62-60 RS SS1-18/ SS1-24/ SS1-30/ SS1-36/ SS SS SS1-60 RS SS2-18/ SS2-24/ SS2-30/ SS2-36/ SS SS SS2-60

25 Alligator Ready Set Staple Fastener System RSC187 Installation Tool Securely holds the fasteners on the belt, in proper alignment, while staples are driven. Installs two staples simultaneously for fast, simple splicing and the tool can be moved rapidly along the belt as staples are installed. Also provides an anvil surface for initial clinching of the staples. The RSC187 tools come complete with guide blocks and drivers, and are available in a variety of sizes. Wider tools are available for production lacing and fabrication shop requirements. RSC187 Installation Tool Tool Size in. mm 2 50 RSC RSC RSC RSC RSC Staple Kits Everything you need to install, maintain, and repair Alligator Ready Set Staple splices. Kit includes the RSC187 tool described above, as well as the staple set plate, hand skiver, belt marker, belt nippers, and 1 lb. (.45 kg) hammer. Packaged in a durable box with plenty of room Staple Kits Description left over for other items. 6" Installation Kit RSTK4-6 12" Installation Kit RSTK4-12 Hand Skiver Our hand-held skiver makes it easy to remove impression covers prior to fastener size selection and installation. Allows fasteners to be installed closer to the belt carcass for a lower profile. Hand Skiver RTBS Rough Top Skiver Australia: England: Germany: Mexico: New Zealand: Republic of South Africa: Flexible Steel Lacing Company 2525 Wisconsin Avenue Downers Grove, IL U.S.A. Telephone: (630) Fax: (630) [email protected] Visit our Web site at: Flexible Steel Lacing Company. 7/03, Part#X0727 Ready Set is a trademark and Alligator is a registered trademark of Flexible Steel Lacing Company

26 X1278 Alligator Spiral Lace Fastener System Market Applications: Metal Detectors Food Processing Metal Stamping Scanning Belts Pharmaceutical Processing Non-Metallic Splice There are some applications where a conventional metallic splice can t be used for one reason or another. Alligator Spiral Lace is a non-metallic, low-profile splice and is often an ideal choice for these applications. It is available in white polyester for applications demanding FDA approved materials, black polyester for general applications, or PEEK for high temperature applications. Compatible with Small Pulleys The size and flexibility of the Spiral Lace allows it to be used on conveyors with pulleys and nose bars as small as 1/2" (12.5 mm) diameter. Non-Marking Spiral Lace is a non-abrasive, non-marking splice and can be used effectively when conveying delicate items or items that can scratch easily, such as metal stamped products. Hinged Splice Offers Quicker Uptime Installing a belt with a vulcanized splice is a time-consuming process the amount of downtime depends upon the extent to which the conveyor needs to be dismantled. Flexco, the world leader in mechanical belt fastening systems, knows the importance of short downtime and therefore offers a wide variety of hinged mechanical belt splices, including Alligator Spiral Lace. Not only is the initial installation quicker, but if belts need to be sanitized then all that is required is to remove the hinge pin and separate the belt. Leader Pins Simplify Pin Insertion Connecting pin installation can be difficult, given both the small diameter of the pin and the flexibility of the material. To ease and speed this process we offer Leader Pins, which attach a smaller diameter, rigid lead pin to the larger diameter, flexible connecting pin. The lead pin is easily fed through the splice, allowing the actual connecting pin to be pulled through. The use of Leader Pins often reduces pin insertion time by more than 75%. LEADER PIN CONNECTING PIN

27 Alligator Spiral Lace Fastener System Alligator Spiral Lace Selection Chart FASTENER SIZE APPROX. BELT THICKNESS RANGE MINIMUM PULLEY/ NOSE BAR APPROX. OPERATING TENSION MAX. OPERATING TEMPERATURE APPROX. PIN DIAMETER in. mm in. mm P.I.W. kn/m Degrees F Degrees C in. mm ASL60/ASL160 1/32-1/ / ASL90/ASL190 1/8-3/ / ASL80H Up to 1/4 Up to 6.4 5/ Alligator Spiral Lace LENGTH ORDERING ITEM LENGTH ORDERING ITEM Feet Meters NUMBER CODE Feet Meters NUMBER CODE WHITE - SINGLE WEB WHITE - SINGLE WEB 10 3 ASL50/ ASL60/ ASLB60/ ASL60/ ASL60/ ASL90/ ASLB90/ ASL90/ ASL90/ ASLB90/ ASL160/ ASL190/ WHITE - DOUBLE WEB BLACK - DOUBLE WEB 10 3 ASL60D/ ASL60D/ ASL60D/ ASL90D/ ASLB90D/ ASL90D/ ASLB90D/ ASL90D/ ASL100D/ TAN - DOUBLE WEB - HIGH HEAT 10 3 ASL80H/ Leader Pins Note: Custom lengths available POLY035X15FT-W/3 FT (15-foot pin with 3-foot leader) POLY047X15FT-W/3 FT (15-foot pin with 3-foot leader) Replacement Hinge Pins - Coils ORDERING NUMBER ITEM CODE ASLHP ASLHP ASLHP Australia: England: Germany: Mexico: New Zealand: Republic of South Africa: Flexible Steel Lacing Company 2525 Wisconsin Avenue Downers Grove, IL U.S.A. Telephone: (630) Fax: (630) [email protected] Visit our Web site at: Flexible Steel Lacing Company Lit Code 2024 Part No. X1278 Released 11/03 Alligator is a registered trademark of Flexible Steel Lacing Company.

28 Flexco SR Rivet Hinged Fastener System RH240 The Flexco SR Scalloped Edge fastener features a low profile that significantly reduces the fastener s exposure to cleaner blades, skirt rubber, and return idlers. Reduced wear and tear on the fastener extends the life of the splice to maximize belt availability and to help keep productivity on a roll. Scalloped Edge Improved performance Designed for rubber plied and PVC solid woven belting, and for worn belts unfit for vulcanized splices, the Flexco SR fastener features a patented Scalloped Edge design. The scalloped design contributes to improved fastener profile resulting in increased compatibility with belt cleaners and improved cleaner-tip wear. The staggered rivet pattern also provides maximum holding ability by allowing the rivets to pass betweeen the carcass fibers without damaging them. Viewport Lower fastener profile extends belt splice life. Less effort required for installation. Reduced maintenance costs. Viewport assures proper installation alignment. A built-in viewport simplifies fastener positioning. And self-setting rivets are installed from the top side of the belt for faster installation. Market applications Coal Wood Processing Asphalt Plants Construction and Road Equipment Flexco SR Scalloped Edge Fastener Selection Guide Fastener Size Belt Thickness Range For Belts with Mechanical Fastener Ratings Up To: Recommended Minimum Pulley Diameter (Operating Tension 75%-100% of Belt Rating) in. mm P.I.W. kn/m in. mm R2 1/8-3/ R5 7/32-7/ R5-1/2 5/16-19/ R6 13/32-11/ RAR6LP 5/16-23/ RAR8 13/32-11/

29 Flexco Rivet Hinged Fastener System Fasteners Use the charts below to match the Flexco SR Scalloped Edge fasteners to your needs. Find the fastener metal type required for your application. Then choose the ordering number that corresponds to your belt s width. Belt Width in. mm Flexco R2 (Two fastener strips per package) Steel Stainless 300 Series Rivets Required For One Joint R2-12/300 R2S-12/ R2-18/450 R2S-18/ R2-24/600 R2S-24/ R2-30/750 R2S-30/ R2-36/900 R2S-36/ R2-42/1050 R2S-42/ R2-48/1200 R2S-48/ R2-54/1350 R2S-54/ R2-60/1500 R2S-60/ Flexco R5 (Two fastener strips per package) Steel Stainless 300 Series RustAlloy 400 Series SS Rivets Required For One Joint R5-SE-18/450 R5S-SE-18/ R5-SE-24/600 R5S-SE-24/600 RAR5-SE-24/ R5-SE-26/650 RAR5-SE-26/ R5-SE-30/750 R5S-SE-30/750 RAR5-SE-30/ R5-SE-36/900 R5S-SE-36/900 RAR5-SE-36/ R5-SE-42/1050 R5S-SE-42/1050 RAR5-SE-42/ R5-SE-48/1200 R5S-SE-48/1200 RAR5-SE-48/ R5-SE-54/1350 RAR5-SE-54/ R5-SE-60/1500 R5S-SE-60/1500 RAR5-SE-60/ R5-SE-72/ Flexco R5-1/2 (Two fastener strips per package) Flexco R6 and RAR6LP Low Profile (Two fastener strips per package) Belt Width in. mm Steel RustAlloy 400 Series SS Rivets Required For One Joint R5-1/2-SE-18/ R5-1/2-SE-24/600 RAR5-1/2-SE-24/ R5-1/2-SE-30/750 RAR5-1/2-SE-30/ R5-1/2-SE-36/900 RAR5-1/2-SE-36/ R5-1/2-SE-42/1050 RAR5-1/2-SE-42/ R5-1/2-SE-48/1200 RAR5-1/2-SE-48/ R5-1/2-SE-54/1350 RAR5-1/2-SE-54/ R5-1/2-SE-60/1500 RAR5-1/2-SE-60/ R5-1/2-SE-72/1800 RAR5-1/2-SE-72/ Steel RustAlloy 400 Series SS RustAlloy Low Profile 400 Series SS Rivets Required For One Joint R6-SE-24/ R6-SE-30/ R6-SE-36/ R6-SE-42/1050 RAR6-SE-42/1050 RAR6LP-SE-42/ R6-SE-48/1200 RAR6-SE-48/1200 RAR6LP-SE-48/ R6-SE-54/1350 RAR6-SE-54/1350 RAR6LP-SE-54/ R6-SE-60/1500 RAR6-SE-60/1500 RAR6LP-SE-60/ R6-SE-72/1800 RAR6-SE-72/1800 RAR6LP-SE-72/ R6-SE-84/2130 RAR6-SE-84/2130 RAR6LP-SE-84/ Flexco R5 MegAlloy (Two fastener strips per package) R5 MegAlloy fasteners are supplied as 4 plate strips and are packaged 10 strips per box. Enough fasteners to splice a 36 (900mm) belt. R5MA-SE Flexco RAR8 (Two fastener strips per package) Belt Width RustAlloy in. mm 400 Series SS RAR8-SE-48/ RAR8-SE-54/ RAR8-SE-60/ RAR8-SE-72/ RAR8-SE-84/2130

30 Flexco Rivet Hinged Fastener System Hinge Pins A wide selection makes it easy to match pins to the needs of the application. Selection ranges from bare steel cable to nylon-covered armored cable. For R2 and R5 Belt Width AC (1/4 dia.) Bare Armored Cable ACS (17/64 dia.) Bare Armored Stainless Cable NAC (1/4 dia.) Nylon Covered Armored Cable NC (1/4 dia.) Nylon Covered Steel Cable NCS (1/4 dia.) Nylon Covered Stainless Cable* in. mm Each (One Pin) Package (Ten Pins) Each (One Pin) Package (Ten Pins) Each (One Pin) Package (Ten Pins) Each (One Pin) Package (Ten Pins) Each (One Pin) Package (Ten Pins) NC AC-18-1 AC-18 NAC-18-1 NAC-18 NC-18-1 NC AC-24-1 AC-24 NAC-24-1 NAC-24 NC-24-1 NC-24 NCS-24-1 NCS AC-30-1 AC-30 ACS-30-1 ACS-30 NAC-30-1 NAC-30 NC-30-1 NC-30 NCS-30-1 NCS AC-36-1 AC-36 ACS-36-1 ACS-36 NAC-36-1 NAC-36 NC-36-1 NC-36 NCS-36-1 NCS AC-42-1 AC-42 ACS-42-1 ACS-42 NAC-42-1 NAC-42 NC-42-1 NC-42 NCS-42-1 NCS AC-48-1 AC-48 ACS-48-1 ACS-48 NAC-48-1 NAC-48 NC-48-1 NC-48 NCS-48-1 NCS AC-54-1 ACS-54-1 ACS-54 NAC-54-1 NC-54-1 NC-54 NCS-54-1 NCS AC-60-1 ACS-60-1 ACS-60 NAC-60-1 NC-60-1 NC-60 NCS-60-1 NCS AC-72-1 ACS-72-1 ACS-72 NAC-72-1 NC-72-1 NC-72 NCS-72-1 For R2 and R5 in. Belt Width mm SC (1/4 dia.) Bare Steel Cable Each (One Pin) Package (Ten Pins) SSC (7/32 dia.) Bare Stainless Cable* Each (One Pin) Package (Ten Pins) SC-18 SSC SC-24-1 SC-24 SSC-24-1 SSC SC-30-1 SC-30 SSC-30-1 SSC SC-36-1 SC-36 SSC-36-1 SSC SC-42-1 SC-42 SSC-42-1 SSC SC-48-1 SC-48 SSC-48-1 SSC SC-54-1 SC-54 SSC-54-1 SSC SC-60-1 SC-60 SSC-60-1 SSC SC-72-1 SSC-72-1 Belt Width For R5-1/2, R6, RAR6LP AC6 (3/8 dia.) Bare Armored Steel Cable SC6 (23/64 dia.) Bare Steel Cable* For R5 in. Belt Width mm SC932 (9/32 dia.) Bare Steel Cable Each (One Pin) Package (Ten Pins) SSC932 (9/32 dia.) Bare Stainless Cable* Each (One Pin) Package (Ten Pins) SC SSC SC SSC SC SC SSC SSC SC SC SSC SSC SC SC SSC SSC SC SC SSC SSC SC SC SSC SSC SC SC SSC SSC SC SC SSC SSC SC SSC For R5-1/2, R6, RAR6LP, RAR8 ACS6 (3/8 dia.) Bare Armored Stainless Cable* For R6, RAR6LP NAC6 (13/32 dia.) Nylon Covered Armored Cable *300 Series *300 Series *300 Series in. mm Each (One Pin) Package (Ten Pins) Each (One Pin) Package (Ten Pins) Each (One Pin) Package (Ten Pins) Each (One Pin) Package (Ten Pins) AC AC6-24 AC AC6-30 AC AC6-36 SC6-36 AC AC6-38 SC SC6-38 AC AC6-42 SC SC6-42 AC AC6-48 SC SC6-48 AC AC6-54 SC SC6-54 AC AC6-60 SC SC6-60 AC AC6-72 SC SC6-72 ACS6-36/900-1 ACS ACS ACS ACS ACS ACS6-36/900 ACS6-42 ACS6-48 ACS6-54 ACS6-60 ACS6-72 NAC NAC NAC NAC NAC NAC NAC NAC NAC NAC6-24 NAC6-30 NAC6-36 NAC6-38 NAC6-42 NAC6-48 NAC6-54 NAC6-60 NAC6-72 *300 Series

31 Flexco Rivet Hinged Fastener System Rivets Rivets are available in either steel or stainless steel. Rivets are packaged 250 rivets per box. SRAA, SRA, SRB, and SRC rivets are also available in 100-count packages. Bulk packs of 2,000 rivets are also available in reusable plastic buckets. Rivet Selection Chart Fastener Size R2 R5 R5-1/2 & RAR6LP R6 RAR8 *Applies to RAR6LP only Belt Thickness Range in. mm Rivet Size 1/8-7/ SRAA 3/16-5/ SRA 9/32-3/ SRB 7/32-5/ SRA 9/32-3/ SRB 11/32-7/ SRC 13/32-7/ SRC/D 5/16-11/ SRB 5/16-13/ SRC 3/8-15/ SRC/D 7/16-17/ SRD 1/2-19/ SRE 9/16-21/ SRF* 5/8-23/ SRG* 11/32-7/ SRC/D 13/32-1/ SRD 15/32-9/ SRE 17/32-5/ SRF 19/32-11/ SRG 13/32-7/ SRC/D 13/32-1/ SRD 15/32-9/ SRE 17/32-5/ SRF 19/32-11/ SRG Rivets Self-Setting Pre-Assembled With Pilot Nails Steel Stainless Type 430 Box (100 Rivets) SRAA-100 SRA-100 SRB-100 SRC-100 Box (250 Rivets) SRAA SRAA-S SRA SRA-S SRB SRB-S SRC SRC-S SRC/D SRC/D-S SRD SRD-S SRE SRE-S SRF SRF-S SRG SRG-S Bucket (2000 Rivets) SRA-2M SRA-S-2M SRB-2M SRB-S-2M SRC-2M SRC-S-2M SRC/D-2M SRC/D-S-2M SRD-2M SRD-S-2M SRE-2M SRE-S-2M SRF-2M SRF-S-2M SRG-2M SRG-S-2M Installation Tools For easy-to-use, portable tools that make multiple rivet driving simple and fast, choose the MSRT or MSRT8. For single rivet driving, choose the SRTA tool and for easy installation of Flexco R2 fastener, the R2T tool is lightweight, portable and economically priced. MSRT Applicator Complete (Installs R5, R5-1/2, R6 & RAR6 fasteners only) Belt Width in. mm MSRT MSRT MSRT MSRT MSRT MSRT MSRT-84 MSRT8 Applicator Complete (Installs R6, RAR6 & RAR8 fasteners only) Belt Width in. mm MSRT MSRT MSRT MSRT8-84 SRTA Applicator Complete (Includes one SR-50 Driver Tool) Belt Width in. mm SRTA SRTA SRTA SRTA SRTA SRTA SRTA-84 R2T Applicator Tool Tool Size in. mm R2T Flexible Steel Lacing Company 2525 Wisconsin Avenue Downers Grove, IL U.S.A. Telephone: (630) Fax: (630) Visit our Web site at: Australia: England: Germany: Mexico: New Zealand: Republic of South Africa: Flexible Steel Lacing Company. 9/04 SR and Scalloped Edge are trademarks and Flexco is a registered trademark of Flexible Steel Lacing Company

32 Townsend Bearings & Transmissions Limited Unit 1, St.Andrews Industrial Estate, Bridport, Dorset. DT6 3EX. England. Tel : (UK only) (Outside the UK) Fax : (UK only) (Outside the UK) [email protected]