Low Noise, High Speed Amplifier for 16-Bit Systems AD8021

Size: px
Start display at page:

Download "Low Noise, High Speed Amplifier for 16-Bit Systems AD8021"

Transcription

1 Low Noise, High Speed Amplifier for -Bit Systems AD FEATURES Low noise. nv/ Hz input voltage noise. pa/ Hz input current noise Custom compensation Constant bandwidth from G = to G = High speed MHz (G = ) 9 MHz (G = ) Low power 4 mw or.7 ma typical for V supply Output disable feature,. ma Low distortion 9 dbc second harmonic, fc = MHz dbc third harmonic, fc = MHz DC precision mv maximum input offset voltage. μv/ C input offset voltage drift Wide supply range, V to 4 V Low price Small packaging Available in SOIC- and MSOP- APPLICATIONS ADC preamps and drivers Instrumentation preamps Active filters Portable instrumentation Line receivers Precision instruments Ultrasound signal processing High gain circuits GENERAL DESCRIPTION The AD is an exceptionally high performance, high speed voltage feedback amplifier that can be used in -bit resolution systems. It is designed to have both low voltage and low current noise (. nv/ Hz typical and. pa/ Hz typical) while operating at the lowest quiescent supply current (7 ± V) among today s high speed, low noise op amps. The AD operates over a wide range of supply voltages from ±. V to ± V, as well as from single V supplies, making it ideal for high speed, low power instruments. An output disable pin allows further reduction of the quiescent supply current to. ma. CONNECTION DIAGRAM LOGIC REFERENCE IN +IN 4 AD 7 DISABLE V OUT C COMP Figure. SOIC- (R-) and MSOP- (RM-) The AD allows the user to choose the gain bandwidth product that best suits the application. With a single capacitor, the user can compensate the AD for the desired gain with little trade-off in bandwidth. The AD is a well-behaved amplifier that settles to.% in ns for a V step. It has a fast overload recovery of ns. The AD is stable over temperature with low input offset voltage drift and input bias current drift,. μv/ C and na/ C, respectively. The AD is also capable of driving a 7 Ω line with ± V video signals. The AD is both technically superior and priced considerably less than comparable amps drawing much higher quiescent current. The AD is a high speed, general-purpose amplifier, ideal for a wide variety of gain configurations and can be used throughout a signal processing chain and in control loops. The AD is available in both standard -lead SOIC and MSOP packages in the industrial temperature range of 4 C to + C. CLOSED-LOOP 4 9 V OUT = mv p-p G =, R F = kω, R G = Ω, R IN = Ω, C C = pf G =, R F = kω, R G = Ω, R IN =.Ω, C C =.pf G =, R F =, R G = 49Ω, R IN =.4Ω, C C = 4pF G =, R F =, R G =, R IN =.Ω, C C = 7pF.M M M M G Figure. Small Signal Frequency Response - - Rev. F Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. One Technology Way, P.O. Box 9, Norwood, MA -9, U.S.A. Tel: Fax: 7.4. Analog Devices, Inc. All rights reserved.

2 AD TABLE OF CONTENTS Features... Applications... General Description... Connection Diagram... Revision History... Specifications... Absolute Maximum Ratings... 7 Maximum Power Dissipation... 7 ESD Caution... 7 Pin Configuration and Function Descriptions... Applications... 9 Using the Disable Feature... Theory of Operation... PCB Layout Considerations... Driving -Bit ADCs... Differential Driver... Using the AD in Active Filters... Driving Capacitive Loads... Outline Dimensions... Ordering Guide... Typical Performance Characteristics... 9 Test Circuits... 7 REVISION HISTORY / Rev. E to Rev. F Updated Format...Universal Changes to General Description... Changes to Figure... 7 Changes to Figure... 9 Changes to Table 9... / Rev. D to Rev. E Updated Format...Universal Change to Figure 9... Change to Figure... Change to Table 7 and Table... Change to Driving -Bit ADCs Section... 7/ Rev. B to Rev. C Deleted All References to Evaluation Board...Universal Replaced Figure... Updated Outline Dimensions... / Rev. A to Rev. B Edits to Evaluation Board Applications... Edits to Figure 7... / Rev. to Rev. A Edits to Specifications... / Rev. C to Rev. D Updated Format...Universal Rev. F Page of

3 AD SPECIFICATIONS VS = ± TA = C, RL = kω, gain = +, unless otherwise noted. Table. ADAR/ADARM Parameter Conditions Min Typ Max Unit DYNAMIC PERFORMANCE db Small Signal Bandwidth G = +, CC = pf, VO =. V p-p 49 MHz G = +, CC = 7 pf, VO =. V p-p MHz G = +, CC = pf, VO =. V p-p MHz G = +, CC = pf, VO =. V p-p MHz Slew Rate, V Step G = +, CC = pf 9 V/μs G = +, CC = 7 pf V/μs G = +, CC = pf V/μs G = +, CC = pf 4 V/μs Settling Time to.% VO = V step, RL = Ω ns Overload Recovery (%) ±. V input step, G = + ns DISTORTION/NOISE PERFORMANCE f = MHz HD VO = V p-p 9 dbc HD VO = V p-p dbc f = MHz HD VO = V p-p 7 dbc HD VO = V p-p dbc Input Voltage Noise f = khz.. nv/ Hz Input Current Noise f = khz. pa/ Hz Differential Gain Error NTSC, RL = Ω. % Differential Phase Error NTSC, RL = Ω.4 Degrees DC PERFORMANCE Input Offset Voltage.4. mv Input Offset Voltage Drift TMIN to TMAX. μv/ C Input Bias Current +Input or input 7.. μa Input Bias Current Drift na/ C Input Offset Current.. ±μa Open-Loop Gain db INPUT CHARACTERISTICS Input Resistance MΩ Common-Mode Input Capacitance pf Input Common-Mode Voltage Range 4. to +4. V Common-Mode Rejection Ratio VCM = ±4 V 9 db OUTPUT CHARACTERISTICS Output Voltage Swing. to +.. to +.4 V Linear Output Current ma Short-Circuit Current 7 ma Capacitive Load Drive for % Overshoot VO = mv p-p/ V p-p / pf DISABLE CHARACTERISTICS Off Isolation f = MHz 4 db Turn-On Time VO = V to V, % logic to % output 4 ns Turn-Off Time VO = V to V, % logic to % output ns DISABLE Voltage Off/On VDISABLE VLOGIC REFERENCE.7/.9 V Enabled Leakage Current LOGIC REFERENCE =.4 V 7 μa DISABLE = 4. V μa Rev. F Page of

4 AD ADAR/ADARM Parameter Conditions Min Typ Max Unit Disabled Leakage Current LOGIC REFERENCE =.4 V μa DISABLE =.4 V μa POWER SUPPLY Operating Range ±. ± ±. V Quiescent Current Output enabled ma Output disabled.. ma +Power Supply Rejection Ratio VCC = 4 V to V, VEE = V 9 db Power Supply Rejection Ratio VCC = V, VEE = V to 4 V 9 db VS = ± TA = C, RL = kω, gain = +, unless otherwise noted. Table. ADAR/ADARM Parameter Conditions Min Typ Max Unit DYNAMIC PERFORMANCE db Small Signal Bandwidth G = +, CC = pf, VO =. V p-p MHz G = +, CC = 7 pf, VO =. V p-p 7 MHz G = +, CC = pf, VO =. V p-p 7 MHz G = +, CC = pf, VO =. V p-p MHz Slew Rate, V Step G = +, CC = pf V/μs G = +, CC = 7 pf 4 7 V/μs G = +, CC = pf 4 V/μs G = +, CC = pf 4 4 V/μs Settling Time to.% VO = V step, RL = Ω ns Overload Recovery (%) ± V input step, G = + 9 ns DISTORTION/NOISE PERFORMANCE f = MHz HD VO = V p-p 9 dbc HD VO = V p-p dbc f = MHz HD VO = V p-p 7 dbc HD VO = V p-p dbc Input Voltage Noise f = khz.. nv/ Hz Input Current Noise f = khz. pa/ Hz Differential Gain Error NTSC, RL = Ω. % Differential Phase Error NTSC, RL = Ω.4 Degrees DC PERFORMANCE Input Offset Voltage.4. mv Input Offset Voltage Drift TMIN to TMAX. μv/ C Input Bias Current +Input or input. μa Input Bias Current Drift na/ C Input Offset Current.. ±μa Open-Loop Gain 4 db INPUT CHARACTERISTICS Input Resistance MΩ Common-Mode Input Capacitance pf Input Common-Mode Voltage Range. to +. V Common-Mode Rejection Ratio VCM = ± V 9 db Rev. F Page 4 of

5 AD ADAR/ADARM Parameter Conditions Min Typ Max Unit OUTPUT CHARACTERISTICS Output Voltage Swing. to +9.. to +. V Linear Output Current 7 ma Short-Circuit Current ma Capacitive Load Drive for % Overshoot VO = mv p-p/ V p-p / pf DISABLE CHARACTERISTICS Off Isolation f = MHz 4 db Turn-On Time VO = V to V, % logic to % output 4 ns Turn-Off Time VO = V to V, % logic to % output ns DISABLE Voltage Off/On VDISABLE VLOGIC REFERENCE./.9 V Enabled Leakage Current LOGIC REFERENCE =.4 V 7 μa DISABLE = 4. V μa Disabled Leakage Current LOGIC REFERENCE =.4 V μa DISABLE =.4 V μa POWER SUPPLY Operating Range ±. ± ±. V Quiescent Current Output enabled 7.. ma Output disabled.7. ma +Power Supply Rejection Ratio VCC = V to V, VEE = V 9 db Power Supply Rejection Ratio VCC = V, VEE = V to V db VS = TA = C, RL = kω, gain = +, unless otherwise noted. Table. ADAR/ADARM Parameter Conditions Min Typ Max Unit DYNAMIC PERFORMANCE db Small Signal Bandwidth G = +, CC = pf, VO =. V p-p 7 MHz G = +, CC = 7 pf, VO =. V p-p 9 MHz G = +, CC = pf, VO =. V p-p MHz G = +, CC = pf, VO =. V p-p 9 MHz Slew Rate, V Step G = +, CC = pf V/μs G = +, CC = 7 pf 4 V/μs G = +, CC = pf V/μs G = +, CC = pf 9 9 V/μs Settling Time to.% VO = V step, RL = Ω ns Overload Recovery (%) V to. V input step, G = + 4 ns DISTORTION/NOISE PERFORMANCE f = MHz HD VO = V p-p 4 dbc HD VO = V p-p 9 dbc f = MHz HD VO = V p-p dbc HD VO = V p-p dbc Input Voltage Noise f = khz.. nv/ Hz Input Current Noise f = khz. pa/ Hz Rev. F Page of

6 AD ADAR/ADARM Parameter Conditions Min Typ Max Unit DC PERFORMANCE Input Offset Voltage.4. mv Input Offset Voltage Drift TMIN to TMAX. μv/ C Input Bias Current +Input or input 7.. μa Input Bias Current Drift na/ C Input Offset Current.. ±μa Open-Loop Gain 7 7 db INPUT CHARACTERISTICS Input Resistance MΩ Common-Mode Input Capacitance pf Input Common-Mode Voltage Range.9 to 4. V Common-Mode Rejection Ratio. V to. V 4 9 db OUTPUT CHARACTERISTICS Output Voltage Swing. to.. to. V Linear Output Current ma Short-Circuit Current ma Capacitive Load Drive for % Overshoot VO = mv p-p/ V p-p / pf DISABLE CHARACTERISTICS Off Isolation f = MHz 4 db Turn-On Time VO = V to V, % logic to % output 4 ns Turn-Off Time VO = V to V, % logic to % output ns DISABLE Voltage Off/On VDISABLE VLOGIC REFERENCE./.7 V Enabled Leakage Current LOGIC REFERENCE =.4 V 7 μa DISABLE = 4. V μa Disabled Leakage Current LOGIC REFERENCE =.4 V μa DISABLE =.4 V μa POWER SUPPLY Operating Range ±. ± ±. V Quiescent Current Output enabled.7 7. ma Output disabled.. ma +Power Supply Rejection Ratio VCC = 4. V to. V, VEE = V 74 db Power Supply Rejection Ratio VCC = V, VEE =. V to +. V 7 4 db Rev. F Page of

7 AD ABSOLUTE MAXIMUM RATINGS Table 4. Parameter Rating Supply Voltage.4 V Power Dissipation Observed power derating curves Input Voltage (Common Mode) ±VS ± V Differential Input Voltage ±. V Differential Input Current ± ma Output Short-Circuit Duration Observed power derating curves Storage Temperature Range C to + C Operating Temperature Range 4 C to + C Lead Temperature (Soldering, sec) C The AD inputs are protected by diodes. Current-limiting resistors are not used to preserve the low noise. If a differential input exceeds ±. V, the input current should be limited to ± ma. Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. MAXIMUM POWER DISSIPATION The maximum power that can be safely dissipated by the AD is limited by the associated rise in junction temperature. The maximum safe junction temperature for plastic encapsulated devices is determined by the glass transition temperature of the plastic, approximately C. Temporarily exceeding this limit can cause a shift in parametric performance due to a change in the stresses exerted on the die by the package. Exceeding a junction temperature of 7 C for an extended period can result in device failure. While the AD is internally short-circuit protected, this can not be sufficient to guarantee that the maximum junction temperature ( C) is not exceeded under all conditions. To ensure proper operation, it is necessary to observe the maximum power derating curves. MAXIMUM POWER DISSIPATION (W).... -LEAD MSOP -LEAD SOIC AMBIENT TEMPERATURE ( C) Figure. Maximum Power Dissipation vs. Temperature -4 Specification is for device in free air: -lead SOIC: θja = C/W; -lead MSOP: θja = 4 C/W. ESD CAUTION ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4 V readily accumulate on the human body and test equipment and can discharge without detection. Although this product features proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance degradation or loss of functionality. Rev. F Page 7 of

8 AD PIN CONFIGURATION AND FUNCTION DESCRIPTIONS LOGIC REFERENCE AD DISABLE IN 7 +IN V OUT 4 C COMP Figure 4. Pin Configuration - Table. Pin Function Descriptions Pin No. Mnemonic Description LOGIC REFERENCE Reference for Pin Voltage Level. Connect to logic low supply. IN Inverting Input. +IN Noninverting Input. 4 VS Negative Supply Voltage. CCOMP Compensation Capacitor. Tie to VS. (See the Applications section for value.) VOUT Output. 7 +VS Positive Supply Voltage. DISABLE Disable, Active Low. When Pin (DISABLE) is higher than Pin (LOGIC REFERENCE) by approximately V or more, the part is enabled. When Pin is brought down to within about. V of Pin, the part is disabled. (See the Specifications tables for exact disable and enable voltage levels.) If the disable feature is not going to be used, Pin can be tied to +VS or a logic high source, and Pin can be tied to ground or logic low. Alternatively, if Pin and Pin are not connected, the part is in an enabled state. Rev. F Page of

9 TYPICAL PERFORMANCE CHARACTERISTICS AD TA = C, VS = ± V, RL = kω, G = +, RF = RG = 499 Ω, RS = 49.9 Ω, RO = 97 Ω, RD =. Ω, CC = 7 pf, CL =, CF =, VOUT = V p-p, frequency = MHz, unless otherwise noted. 4 G = +, R F = kω, R G = Ω, C C = pf 9 G = + V S = ±.V V S = ±V 7 CLOSED-LOOP 9 G = +, R F = kω, R G = 49Ω, C C = pf G = +, R F = R G =, C C = 7pF G = +, R F = 7Ω, C C = pf 4 V S = ±.V V S = ±V.M M M M G - M M M G - Figure. Small Signal Frequency Response vs. Frequency and Gain, VOUT = mv p-p, Noninverting (See Figure 4) Figure. Small Signal Frequency Response vs. Frequency and Supply, VOUT = mv p-p, Noninverting (See Figure 4) 4 G =, R F = kω, R G = Ω, R IN = Ω, C C = pf G = V S = ±.V V S = ±V 9 G =, R F = kω, R G = Ω, R IN =.Ω, C C =.pf G =, R F =, R G = 49Ω, R IN =.4Ω, C C = 4pF 4 V S = ±V G =, R F =, R G =, R IN =.Ω, C C = 7pF.M M M M G - 7 M V S = ±.V M M G -9 Figure. Small Signal Frequency Response vs. Frequency and Gain, VOUT = mv p-p Inverting (See Figure 4) Figure 9. Small Signal Frequency Response vs. Frequency and Supply, VOUT = mv p-p, Inverting (See Figure ) 9 G = + C C = pf 9 G = + 7 C C = 7pF 7 V OUT =.V AND mv p-p 4 C C = 9pF 4 V OUT = 4V p-p C C = 7pF V OUT = V p-p C C = 9pF.M M M M G Figure 7. Small Signal Frequency Response vs. Frequency and Compensation Capacitor, VOUT = mv p-p (See Figure 4) -7 M M M G Figure. Frequency Response vs. Frequency and VOUT, Noninverting (See Figure 4) - Rev. F Page 9 of

10 AD 9 G = + 9 G = + R F = R G R F = R F = kω 7 4 R L = kω 7 4 R F = Ω R F = Ω R L = Ω R F = 7Ω.M M M M G - R F = kω AND C F =.pf.m M M M G -4 Figure. Large Signal Frequency Response vs. Frequency and Load, Noninverting (See Figure 49) Figure 4. Small Signal Frequency Response vs. Frequency and RF, Noninverting, VOUT = mv p-p (See Figure 4) 9 7 G = + + C + C 9 G = C V OUT = V p-p 4 C V OUT = mv p-p R S = 49.9Ω R S = Ω M + C 4 C M M G - 9 R S = 49Ω.M M M M G - Figure. Frequency Response vs. Frequency, Temperature, and VOUT, Noninverting (See Figure 4) Figure. Small Signal Frequency Response vs. Frequency and RS, Noninverting, VOUT = mv p-p (See Figure 4) G = + pf pf 9 9 pf pf pf OPEN-LOOP PHASE (Degrees) 4 9 M M M G - k k M M M 9 G - Figure. Small Signal Frequency Response vs. Frequency and Capacitive Load, Noninverting, VOUT = mv p-p (See Figure 49 and Figure 7) Figure. Open-Loop Gain and Phase vs. Frequency, RG = Ω, RF = kω, RO = 97 Ω, RD =. Ω, CC = pf (See Figure ) Rev. F Page of

11 AD.4 G = +. V S = ±.V 4.. V S = ±V V S = ±V P OUT (dbm) 7 Δf =.MHz f f 97Ω P OUT.Ω Ω 9..4 M M -7 M FREQUENCY (MHz) -. Figure 7.. db Flatness vs. Frequency and Supply, VOUT = V p-p, RL = Ω, Noninverting (See Figure 49) Figure. Intermodulation Distortion vs. Frequency DISTORTION (dbc) R L = Ω R L = kω SECOND THIRD-ORDER INTERCEPT (dbm) 4 4 V S = ±.V V S = ±V.M THIRD M M - M FREQUENCY (MHz) - Figure. Second and Third Harmonic Distortion vs. Frequency and RL Figure. Third-Order Intercept vs. Frequency and Supply Voltage 4 DISTORTION (dbc) 7 THIRD SECOND V S = ±.V 9 SECOND V S = ±V THIRD SECOND k M V S = ±V M -9 M DISTORTION (dbc) 7 9 SECOND R L = Ω THIRD SECOND R L = kω THIRD 4 V OUT (V p-p) - Figure 9. Second and Third Harmonic Distortion vs. Frequency and VS Figure. Second and Third Harmonic Distortion vs. VOUT and RL Rev. F Page of

12 AD.. DISTORTION (dbc) 7 9 THIRD SECOND f C = MHz SECOND f C = MHz THIRD 4 V OUT (V p-p) - POSITIVE OUTPUT VOLTAGE (V) POSITIVE OUTPUT NEGATIVE OUTPUT LOAD (Ω) NEGATIVE OUTPUT VOLTAGE (V) - Figure. Second and Third Harmonic Distortion vs. VOUT and Fundamental Frequency (fc), G = + Figure. DC Output Voltages vs. Load (See Figure 4) 4 DISTORTION (dbc) 7 9 SECOND THIRD SECOND THIRD f C = MHz f C = MHz 4 V OUT (V p-p) -4 SHORT-CIRCUIT CURRENT (ma) 4 V S = ±V V S = ±.V V S = ±.V 7 9 TEMPERATURE ( C) -7 Figure 4. Second and Third Harmonic Distortion vs. VOUT and Fundamental Frequency (fc), G = + Figure 7. Short-Circuit Current to Ground vs. Temperature 7 f C = MHz R L = kω R F = R G G = + 4 G = R L = kω, Ω DISTORTION (dbc) 9 SECOND THIRD V OUT (mv) 4 FEEDBACK RESISTANCE (Ω) TIME (ns) - Figure. Second and Third Harmonic Distortion vs. Feedback Resistor (RF) Figure. Small Signal Transient Response vs. RL, VO = mv p-p, Noninverting (See Figure 49) Rev. F Page of

13 AD. V O = 4V p-p G =. V O = V p-p G =. R L = kω. V OUT (V) R L = Ω V OUT (V) V S = ±.V.. V S = ±V. 4 TIME (ns) Figure 9. Large Signal Transient Response vs. RL, Noninverting (See Figure 49) TIME (ns) Figure. Large Signal Transient Response vs. VS (See Figure 4) - 4 V O = 4V p-p G = V IN = ±V G = + V IN = V/DIV V OUT = V/DIV V OUT, R L = kω V IN R L = Ω VOLTS V OUT 4 TIME (ns) - V IN 4 TIME (ns) - Figure. Large Signal Transient Response, Inverting (See Figure ) Figure. Overdrive Recovery vs. RL (See Figure 49). C L = pf G = V O = 4V p-p G = V OUT (V).. C L = pf, pf OUTPUT SETTLING +.%.% ns. - VERT =.mv/div HOR = ns/div -4 4 TIME (ns) Figure. Large Signal Transient Response vs. CL (See Figure 4) Figure 4..% Settling Time, V Step Rev. F Page of

14 AD SETTLING (µv) 4 4 V PULSE WIDTH = ns PULSE WIDTH = µs INPUT CURRENT NOISE (pa/ Hz) V t 4 4 TIME (µs) Figure. Long-Term Settling, V to V, VS = ± V, G = + - k k k M M Figure. Input Current Noise vs. Frequency - 4 G = V OUT (mv) VOLTAGE OFFSET (mv) TIME (ns) TEMPERATURE ( C) -9 Figure. Small Signal Transient Response, VO = mv p-p, G = + (See Figure 4) Figure 9. VOS vs. Temperature.4. VOLTAGE NOISE (nv/ Hz).nV/ Hz INPUT BIAS CURRENT (μa) k k k M -7 M. 7 TEMPERATURE ( C) -4 Figure 7. Input Voltage Noise vs. Frequency Figure 4. Input Bias Current vs. Temperature Rev. F Page 4 of

15 AD 4 CMRR (db) 7 9 DISABLED ISOLATION (db) 4 7 k k M M M -4 9.M M M M G -44 Figure 4. CMRR vs. Frequency (See Figure ) Figure 44. Input-to-Output Isolation, Chip Disabled (See Figure 4) k k k OUTPUT IMPEDANCE (Ω).. OUTPUT IMPEDANCE (Ω) k k k... k k M M M G Figure 4. Output Impedance vs. Frequency, Chip Enabled (See Figure ) -4 k k M M M G Figure 4. Output Impedance vs. Frequency, Chip Disabled (See Figure ) -4 4V DISABLE V PSRR V V t EN = 4ns V OUTPUT t DIS = ns PSRR (db) 4 7 V S = ±.V +PSRR V S = ±V V S = ±V 4 TIME (ns) Figure 4. Enable (ten)/disable (tdis) Time vs. VOUT (See Figure ) -4 9 k k M M M Figure 4. PSRR vs. Frequency and Supply Voltage (See Figure and Figure 7) -4 M Rev. F Page of

16 AD.. SUPPLY CURRENT (ma) TEMPERATURE ( C) Figure 47. Quiescent Supply Current vs. Temperature -47 Rev. F Page of

17 AD TEST CIRCUITS Ω Ω CABLE R IN 49.9Ω R S C C R O R D Ω CABLE Ω AD C C Ω HP7D NETWORK ANALYZER R G R F C F -4 R G 7pF R F - Figure 4. Noninverting Gain Figure. Output Impedance, Chip Enabled Ω CABLE R S FET PROBE 49.9Ω AD Ω R IN 49.9Ω C C C L R L.V 4V 49.9Ω 49.9Ω LOGIC REF DISABLE C C 97Ω.Ω R G R F 7pF C F Figure 49. Noninverting Gain and FET Probe Figure. Enable/Disable 49.9Ω R O Ω CABLE HP7D NETWORK ANALYZER Ω Ω CABLE RIN 49.9Ω R G C C R F Figure. Inverting Gain R D - Ω 49.9Ω 49.9Ω Ω LOGIC REF DISABLE AD Ω CABLE FET PROBE kω Ω HP7D NETWORK ANALYZER Ω C C 7pF Figure 4. Input-to-Output Isolation, Chip Disabled -4.Ω AD +V S C C 7pF Figure. CMRR 49.9Ω - Ω AD C C 7pF Ω HP7D NETWORK ANALYZER Figure. Output Impedance, Chip Disabled - Rev. F Page 7 of

18 AD BIAS BNC Ω HP7D NETWORK ANALYZER Ω BIAS BNC Ω HP7D NETWORK ANALYZER Ω Ω CABLE Ω CABLE 49Ω C C 7pF 49.9Ω, W 97Ω.Ω 49Ω 49.9Ω W C C 7pF 97Ω.Ω - -7 Figure. Positive PSRR Figure 7. Negative PSRR Rev. F Page of

19 AD APPLICATIONS The typical voltage feedback op amp is frequency stabilized with a fixed internal capacitor, CINTERNAL, using dominant pole compensation. To a first-order approximation, voltage feedback op amps have a fixed gain bandwidth product. For example, if its db bandwidth is MHz for a gain of G = +; at a gain of G = +, its bandwidth is only about MHz. The AD is a voltage feedback op amp with a minimal CINTERNAL of about. pf. By adding an external compensation capacitor, CC, the user can circumvent the fixed gain bandwidth limitation of other voltage feedback op amps. Unlike the typical op amp with fixed compensation, the AD allows the user to: Maximize the amplifier bandwidth for closed-loop gains between and, avoiding the usual loss of bandwidth and slew rate. Optimize the trade-off between bandwidth and phase margin for a particular application. Match bandwidth in gain blocks with different noise gains, such as when designing differential amplifiers (as shown in Figure ). OPEN-LOOP C C = pf C C = pf (B) (A) k k k M M M G G (B) (A) (C) (C) Figure. Simplified Diagram of Open-Loop Gain and Phase Response Figure is the AD gain and phase plot that has been simplified for instructional purposes. Arrow A in Figure shows a bandwidth of about MHz and a phase margin at about when the desired closed-loop gain is G = + and the value chosen for the external compensation capacitor is CC = pf. If the gain is changed to G = + and CC is fixed at pf, then (as expected for a typical op amp) the bandwidth is 9 4 PHASE (Degrees) - degraded to about MHz and the phase margin increases to 9 (Arrow B). However, by reducing CC to pf, the bandwidth and phase margin return to about MHz and (Arrow C), respectively. In addition, the slew rate is dramatically increased, as it roughly varies with the inverse of CC. COMPENSATION CAPACITANCE (pf) NOISE GAIN (V/V) Figure 9. Suggested Compensation Capacitance vs. Gain for Maintaining db Peaking Table and Figure 9 provide recommended values of compensation capacitance at various gains and the corresponding slew rate, bandwidth, and noise. Note that the value of the compensation capacitor depends on the circuit noise gain, not the voltage gain. As shown in Figure, the noise gain, GN, of an op amp gain block is equal to its noninverting voltage gain, regardless of whether it is actually used for inverting or noninverting gain. Thus, Noninverting GN = RF/RG + Inverting GN = RF/RG + R S + AD C COMP G = G N = + R F kω R G 49Ω R G 49Ω NONINVERTING INVERTING Figure. The Noise Gain of Both is R F kω AD + G = 4 G N = + C COMP -9 - Rev. F Page 9 of

20 AD CF = CL =, RL = kω, RIN = 49.9 Ω (see Figure 49). Table. Recommended Component Values Noise Gain (Noninverting Gain) RS (Ω) RF (Ω) RG (Ω) CCOMP (pf) Slew Rate (V/μs) db SS BW (MHz) Output Noise (AD Only) (nv/ Hz) 7 7 NA k k k k Output Noise (AD with Resistors) (nv/ Hz) With the AD, a variety of trade-offs can be made to finetune its dynamic performance. Sometimes more bandwidth or slew rate is needed at a particular gain. Reducing the compensation capacitance, as illustrated in Figure 7, increases the bandwidth and peaking due to a decrease in phase margin. On the other hand, if more stability is needed, increasing the compensation capacitor decreases the bandwidth while increasing the phase margin. As with all high speed amplifiers, parasitic capacitance and inductance around the amplifier can affect its dynamic response. Often, the input capacitance (due to the op amp itself, as well as the PC board) has a significant effect. The feedback resistance, together with the input capacitance, can contribute to a loss of phase margin, thereby affecting the high frequency response, as shown in Figure 4. A capacitor (CF) in parallel with the feedback resistor can compensate for this phase loss. Additionally, any resistance in series with the source creates a pole with the input capacitance (as well as dampen high frequency resonance due to package and board inductance and capacitance), the effect of which is shown in Figure. It must also be noted that increasing resistor values increases the overall noise of the amplifier and that reducing the feedback resistor value increases the load on the output stage, thus increasing distortion (see Figure ). USING THE DISABLE FEATURE When Pin (DISABLE) is higher than Pin (LOGIC REFERENCE) by approximately V or more, the part is enabled. When Pin is brought down to within about. V of Pin, the part is disabled. See Table for exact disable and enable voltage levels. If the disable feature is not used, Pin can be tied to VS or a logic high source, and Pin can be tied to ground or logic low. Alternatively, if Pin and Pin are not connected, the part is in an enabled state. Rev. F Page of

21 AD THEORY OF OPERATION The AD is fabricated on the second generation of Analog Devices proprietary High Voltage extra-fast Complementary Bipolar (XFCB) process, which enables the construction of PNP and NPN transistors with similar fts in the GHz region. The transistors are dielectrically isolated from the substrate (and each other), eliminating the parasitic and latch-up problems caused by junction isolation. It also reduces nonlinear capacitance (a source of distortion) and allows a higher transistor, ft, for a given quiescent current. The supply current is trimmed, which results in less part-to-part variation of bandwidth, slew rate, distortion, and settling time. As shown in Figure, the AD input stage consists of an NPN differential pair in which each transistor operates at a. ma collector current. This allows the input devices a high transconductance; thus, the AD has a low input noise of. nv/ khz. The input stage drives a folded cascode that consists of a pair of PNP transistors. The folded cascode and current mirror provide a differential-to-single-ended conversion of signal current. This current then drives the high impedance node (Pin ), where the CC external capacitor is connected. The output stage preserves this high impedance with a current gain of, so that the AD can maintain a high open-loop gain even when driving heavy loads. Two internal diode clamps across the inputs (Pin and Pin ) protect the input transistors from large voltages that could otherwise cause emitter-base breakdown, which would result in degradation of offset voltage and input bias current. +IN IN C INTERNAL.pF OUTPUT PCB LAYOUT CONSIDERATIONS As with all high speed op amps, achieving optimum performance from the AD requires careful attention to PC board layout. Particular care must be exercised to minimize lead lengths between the ground leads of the bypass capacitors and between the compensation capacitor and the negative supply. Otherwise, lead inductance can influence the frequency response and even cause high frequency oscillations. Use of a multilayer printed circuit board, with an internal ground plane, reduces ground noise and enables a compact component arrangement. Due to the relatively high impedance of Pin and low values of the compensation capacitor, a guard ring is recommended. The guard ring is simply a PC trace that encircles Pin and is connected to the output, Pin, which is at the same potential as Pin. This serves two functions. It shields Pin from any local circuit noise generated by surrounding circuitry. It also minimizes stray capacitance, which would tend to otherwise reduce the bandwidth. An example of a guard ring layout is shown in Figure. Also shown in Figure, the compensation capacitor is located immediately adjacent to the edge of the AD package, spanning Pin 4 and Pin. This capacitor must be a high quality surfacemount COG or NPO ceramic. The use of leaded capacitors is not recommended. The high frequency bypass capacitor(s) should be located immediately adjacent to the supplies, Pin 4 and Pin 7. To achieve the shortest possible lead length at the inverting input, the feedback resistor RF is located beneath the board and spans the distance from the output, Pin, to inverting input Pin. The return node of Resistor RG should be situated as close as possible to the return node of the negative supply bypass capacitor connected to Pin 4. LOGIC REFERENCE IN (TOP VIEW) 7 DISABLE BYPASS CAPACITOR C COMP CC - +IN 4 C COMP V OUT GROUND PLANE Figure. Simplified Schematic METAL BYPASS CAPACITOR GROUND PLANE COMPENSATION CAPACITOR - Figure. Recommended Location of Critical Components and Guard Ring Rev. F Page of

22 AD DRIVING -BIT ADCs Low noise and adjustable compensation make the AD especially suitable as a buffer/driver for high resolution ADCs. As seen in Figure 9, the harmonic distortion is better than 9 dbc at frequencies between khz and MHz. This is an advantage for complex waveforms that contain high frequency information, because the phase and gain integrity of the sampled waveform can be preserved throughout the conversion process. The increase in loop gain results in improved output regulation and lower noise when the converter input changes state during a sample. This advantage is particularly apparent when using -bit high resolution ADCs with high sampling rates. Figure shows a typical ADC driver configuration. The AD is in an inverting gain of 7., fc is khz, and its output voltage is V p-p. The results are listed in Table 7. Ω 9Ω R G Ω +V + AD C C pf V pf R F.kΩ IN HI IN HI +V AD7 7kSPS Figure. Inverting ADC Driver, Gain = 7., fc = khz Table 7. Summary of ADC Driver Performance (fc = khz, VOUT = V p-p) Parameter Measurement Unit Second Harmonic Distortion. dbc Third Harmonic Distortion 9. dbc THD. dbc SFDR +. dbc Figure 4 shows another ADC driver connection. The circuit was tested with a noninverting gain of. and an output voltage of approximately V p-p for optimum resolution and noise performance. No filtering was used. An FFT was performed using Analog Devices evaluation software for the AD7 -bit converter. The results are listed in Table. Ω +V Ω + Ω AD C C IN HI BITS +V - Table. Summary of ADC Driver Performance (fc = khz, VOUT = V p-p) Parameter Measurement Unit Second Harmonic Distortion 9. dbc Third Harmonic Distortion.4 dbc THD 4.4 dbc SFDR +.4 dbc DIFFERENTIAL DRIVER The AD is uniquely suited as a low noise differential driver for many ADCs, balanced lines, and other applications requiring differential drive. If pairs of internally compensated op amps are configured as inverter and follower, the noise gain of the inverter is higher than that of the follower section, resulting in an imbalance in the frequency response (see Figure ). A better solution takes advantage of the external compensation feature of the AD. By reducing the CCOMP value of the inverter, its bandwidth can be increased to match that of the follower, avoiding compromises in gain bandwidth and phase delay. The inverting and noninverting bandwidths can be closely matched using the compensation feature, thus minimizing distortion. Figure illustrates an inverter-follower driver circuit operating at a gain of, using individually compensated ADs. The values of feedback and load resistors were selected to provide a total load of less than kω, and the equivalent resistances seen at each op amp s inputs were matched to minimize offset voltage and drift. Figure 7 is a plot of the resulting ac responses of driver halves. V IN 49.9Ω 49Ω G = + + AD 7pF Ω G = + Ω AD pf 4Ω kω kω Figure. Differential Amplifier V OUT V OUT - R G.Ω V R F 7Ω OPTIONAL C F IN LO AD7 7kSPS ADC Figure 4. Noninverting ADC Driver, Gain =, fc = khz BITS -4 Rev. F Page of

23 B B + are AD C 9 V IN R R C AD V OUT 9 G = G = + k M M M G Figure. AC Response of Two Identically Compensated High Speed Op Amps Configured for a Gain of + and a Gain of 9 9 G = ± k M M M G Figure 7. AC Response of Two Dissimilarly Compensated AD Op Amps (Figure ) Configured for a Gain of + and a Gain of, (Note the Close Gain Match) USING THE AD IN ACTIVE FILTERS The low noise and high gain bandwidth of the AD make it an excellent choice in active filter circuits. Most active filter literature provides resistor and capacitor values for various filters but neglects the effect of the op amp s finite bandwidth on filter performance; ideal filter response with infinite loop gain is implied. Unfortunately, real filters do not behave in this manner. Instead, they exhibit finite limits of attenuation, depending on the gain bandwidth of the active device. Good low-pass filter performance requires an op amp with high gain bandwidth for attenuation at high frequencies, and low noise and high dc gain for low frequency, pass-band performance. Figure shows the schematic of a -pole, low-pass active filter and lists typical component values for filters having a Besseltype response with a gain of and a gain of. Figure 9 is a network analyzer plot of this filter s performance R G C C R F Figure. Schematic of a Second-Order, Low-Pass Active Filter Table 9. Typical Component Values for Second-Order, Low- Pass Active Filter of Figure Gain R (Ω) R (Ω) RF (Ω) RG (Ω) C (nf) C (nf) CC (pf) G = G = k k k M M Figure 9. Frequency Response of the Filter Circuit of Figure for Two Different Gains DRIVING CAPACITIVE LOADS When the AD drives a capacitive load, the high frequency response can show excessive peaking before it rolls off. Two techniques can be used to improve stability at high frequency and reduce peaking. The first technique is to increase the compensation capacitor, CC, which reduces the peaking while maintaining gain flatness at low frequencies. The second technique is to add a resistor, RSNUB, in series between the output pin of the AD and the capacitive load, CL. Figure 7 shows the response of the AD when both CC and RSNU B used to reduce peaking. For a given CL, Figure 7 can be used to determine the value of RSNUB that maintains db of peaking in the frequency response. Note, however, that using RSNUB attenuates the low frequency output by a factor of RLOAD/(RSNU B - RLOAD). -9 Rev. F Page of

24 AD Ω 49.9Ω FET PROBE R SNUB pf C C R L kω C C = 7pF; R SNUB = Ω C C = pf; R SNUB = Ω R SNUB (Ω) 4 4 C C = pf; R SNUB = 7.4Ω.. FREQUENCY (MHz) Figure 7. Peaking vs. RSNUB and CC for CL = pf CAPACITIVE LOAD (pf) Figure 7. Relationship of RSNUB B vs. CL for db Peaking at a Gain of + -7 Rev. F Page 4 of

25 AD OUTLINE DIMENSIONS. (.9) 4. (.9) 4. (.74). (.497) 4. (.44). (.4). (.9). (.4) COPLANARITY..7 (.) BSC SEATING PLANE.7 (.). (.). (.). (.). (.9).7 (.7). (.9). (.99) 4.7 (.).4 (.7) COMPLIANT TO JEDEC STANDARDS MS--AA CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS (IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN. Figure 7. -Lead Standard Small Outline Package [SOIC] Narrow Body (R-) Dimensions shown in millimeters and (inches) PIN. BSC.. COPLANARITY.. MAX SEATING PLANE COMPLIANT TO JEDEC STANDARDS MO-7-AA Figure 7. -Lead Mini Small Outline Package [MSOP] (RM-) Dimensions shown in millimeters ORDERING GUIDE Model Temperature Range Package Description Package Option Branding ADAR 4 C to + C -Lead SOIC R- ADAR-REEL 4 C to + C -Lead SOIC R- ADAR-REEL7 4 C to + C -Lead SOIC R- ADARZ 4 C to + C -Lead SOIC R- ADARZ-REEL 4 C to + C -Lead SOIC R- ADARZ-REEL7 4 C to + C -Lead SOIC R- ADARM 4 C to + C -Lead MSOP RM- HNA ADARM-REEL 4 C to + C -Lead MSOP RM- HNA ADARM-REEL7 4 C to + C -Lead MSOP RM- HNA ADARMZ 4 C to + C -Lead MSOP RM- HNA# ADARMZ-REEL 4 C to + C -Lead MSOP RM- HNA# ADARMZ-REEL7 4 C to + C -Lead MSOP RM- HNA# Z = Pb-free part, # denotes lead-free product may be top or bottom marked. Rev. F Page of

26 AD NOTES Rev. F Page of

27 AD NOTES Rev. F Page 7 of

28 AD NOTES Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. C--/(F) Rev. F Page of

Rail-to-Rail, High Output Current Amplifier AD8397

Rail-to-Rail, High Output Current Amplifier AD8397 Rail-to-Rail, High Output Current Amplifier AD8397 FEATURES Dual operational amplifier Voltage feedback Wide supply range from 3 V to 24 V Rail-to-rail output Output swing to within.5 V of supply rails

More information

High Speed, Low Cost, Triple Op Amp ADA4861-3

High Speed, Low Cost, Triple Op Amp ADA4861-3 High Speed, Low Cost, Triple Op Amp ADA486-3 FEATURES High speed 73 MHz, 3 db bandwidth 625 V/μs slew rate 3 ns settling time to.5% Wide supply range: 5 V to 2 V Low power: 6 ma/amplifier. db flatness:

More information

Precision, Unity-Gain Differential Amplifier AMP03

Precision, Unity-Gain Differential Amplifier AMP03 a FEATURES High CMRR: db Typ Low Nonlinearity:.% Max Low Distortion:.% Typ Wide Bandwidth: MHz Typ Fast Slew Rate: 9.5 V/ s Typ Fast Settling (.%): s Typ Low Cost APPLICATIONS Summing Amplifiers Instrumentation

More information

High Speed, Low Power Monolithic Op Amp AD847

High Speed, Low Power Monolithic Op Amp AD847 a FEATURES Superior Performance High Unity Gain BW: MHz Low Supply Current:.3 ma High Slew Rate: 3 V/ s Excellent Video Specifications.% Differential Gain (NTSC and PAL).9 Differential Phase (NTSC and

More information

High Voltage Current Shunt Monitor AD8212

High Voltage Current Shunt Monitor AD8212 High Voltage Current Shunt Monitor AD822 FEATURES Adjustable gain High common-mode voltage range 7 V to 65 V typical 7 V to >500 V with external pass transistor Current output Integrated 5 V series regulator

More information

High Common-Mode Rejection. Differential Line Receiver SSM2141. Fax: 781/461-3113 FUNCTIONAL BLOCK DIAGRAM FEATURES. High Common-Mode Rejection

High Common-Mode Rejection. Differential Line Receiver SSM2141. Fax: 781/461-3113 FUNCTIONAL BLOCK DIAGRAM FEATURES. High Common-Mode Rejection a FEATURES High Common-Mode Rejection DC: 00 db typ 60 Hz: 00 db typ 20 khz: 70 db typ 40 khz: 62 db typ Low Distortion: 0.00% typ Fast Slew Rate: 9.5 V/ s typ Wide Bandwidth: 3 MHz typ Low Cost Complements

More information

High Speed, Low Power Dual Op Amp AD827

High Speed, Low Power Dual Op Amp AD827 a FEATURES High Speed 50 MHz Unity Gain Stable Operation 300 V/ms Slew Rate 120 ns Settling Time Drives Unlimited Capacitive Loads Excellent Video Performance 0.04% Differential Gain @ 4.4 MHz 0.198 Differential

More information

Single-Supply, Rail-to-Rail, Low Power, FET Input Op Amp AD820

Single-Supply, Rail-to-Rail, Low Power, FET Input Op Amp AD820 Single-Supply, Rail-to-Rail, Low Power, FET Input Op Amp AD82 FEATURES True single-supply operation Output swings rail-to-rail Input voltage range extends below ground Single-supply capability from 5 V

More information

Low Cost, High Speed, Rail-to-Rail, Output Op Amps ADA4851-1/ADA4851-2/ADA4851-4

Low Cost, High Speed, Rail-to-Rail, Output Op Amps ADA4851-1/ADA4851-2/ADA4851-4 Low Cost, High Speed, Rail-to-Rail, Output Op Amps ADA485-/ADA485-/ADA485-4 FEATURES Qualified for automotive applications High speed 3 MHz, 3 db bandwidth 375 V/μs slew rate 55 ns settling time to.% Excellent

More information

High Speed, Low Noise Video Op Amp AD829

High Speed, Low Noise Video Op Amp AD829 Data Sheet FEATURES High speed MHz bandwidth, gain = V/µs slew rate 9 ns settling time to.% Ideal for video applications.% differential gain. differential phase Low noise.7 nv/ Hz input voltage noise.

More information

Low Cost Instrumentation Amplifier AD622

Low Cost Instrumentation Amplifier AD622 Data Sheet FEATURES Easy to use Low cost solution Higher performance than two or three op amp design Unity gain with no external resistor Optional gains with one external resistor (Gain range: 2 to 000)

More information

Wide Bandwidth, Fast Settling Difet OPERATIONAL AMPLIFIER

Wide Bandwidth, Fast Settling Difet OPERATIONAL AMPLIFIER Wide Bandwidth, Fast Settling Difet OPERATIONAL AMPLIFIER FEATURES HIGH GAIN-BANDWIDTH: 35MHz LOW INPUT NOISE: 1nV/ Hz HIGH SLEW RATE: V/µs FAST SETTLING: 24ns to.1% FET INPUT: I B = 5pA max HIGH OUTPUT

More information

High Accuracy, Ultralow IQ, 1 A, anycap Low Dropout Regulator ADP3338

High Accuracy, Ultralow IQ, 1 A, anycap Low Dropout Regulator ADP3338 High Accuracy, Ultralow IQ, 1 A, anycap Low Dropout Regulator ADP3338 FEATURES High accuracy over line and load: ±.8% @ 25 C, ±1.4% over temperature Ultralow dropout voltage: 19 mv (typ) @ 1 A Requires

More information

Quad Low Offset, Low Power Operational Amplifier OP400

Quad Low Offset, Low Power Operational Amplifier OP400 Data Sheet FEATURES Low input offset voltage: 5 µv maximum Low offset voltage drift over 55 C to 25 C:.2 μv/ C maximum Low supply current (per amplifier): 725 µa maximum High open-loop gain: 5 V/mV minimum

More information

Low Noise, Matched Dual PNP Transistor MAT03

Low Noise, Matched Dual PNP Transistor MAT03 a FEATURES Dual Matched PNP Transistor Low Offset Voltage: 100 V Max Low Noise: 1 nv/ Hz @ 1 khz Max High Gain: 100 Min High Gain Bandwidth: 190 MHz Typ Tight Gain Matching: 3% Max Excellent Logarithmic

More information

High Accuracy, Ultralow IQ, 1.5 A, anycap Low Dropout Regulator ADP3339

High Accuracy, Ultralow IQ, 1.5 A, anycap Low Dropout Regulator ADP3339 Data Sheet High Accuracy, Ultralow IQ,.5 A, anycap Low Dropout Regulator FEATURES FUNCTIONAL BLOCK DIAGRAM High accuracy over line and load: ±.9% at 5 C, ±.5% over temperature Ultralow dropout voltage:

More information

+5 V Powered RS-232/RS-422 Transceiver AD7306

+5 V Powered RS-232/RS-422 Transceiver AD7306 a FEATURES RS- and RS- on One Chip Single + V Supply. F Capacitors Short Circuit Protection Excellent Noise Immunity Low Power BiCMOS Technology High Speed, Low Skew RS- Operation C to + C Operations APPLICATIONS

More information

PIN CONFIGURATION FEATURES ORDERING INFORMATION ABSOLUTE MAXIMUM RATINGS. D, F, N Packages

PIN CONFIGURATION FEATURES ORDERING INFORMATION ABSOLUTE MAXIMUM RATINGS. D, F, N Packages DESCRIPTION The µa71 is a high performance operational amplifier with high open-loop gain, internal compensation, high common mode range and exceptional temperature stability. The µa71 is short-circuit-protected

More information

HA-5104/883. Low Noise, High Performance, Quad Operational Amplifier. Features. Description. Applications. Ordering Information. Pinout.

HA-5104/883. Low Noise, High Performance, Quad Operational Amplifier. Features. Description. Applications. Ordering Information. Pinout. HA5104/883 April 2002 Features This Circuit is Processed in Accordance to MILSTD 883 and is Fully Conformant Under the Provisions of Paragraph 1.2.1. Low Input Noise Voltage Density at 1kHz. 6nV/ Hz (Max)

More information

CMOS Switched-Capacitor Voltage Converters ADM660/ADM8660

CMOS Switched-Capacitor Voltage Converters ADM660/ADM8660 CMOS Switched-Capacitor Voltage Converters ADM66/ADM866 FEATURES ADM66: Inverts or Doubles Input Supply Voltage ADM866: Inverts Input Supply Voltage ma Output Current Shutdown Function (ADM866) 2.2 F or

More information

Features. Ordering Information. * Underbar marking may not be to scale. Part Identification

Features. Ordering Information. * Underbar marking may not be to scale. Part Identification MIC86 Teeny Ultra Low Power Op Amp General Description The MIC86 is a rail-to-rail output, input common-mode to ground, operational amplifier in Teeny SC7 packaging. The MIC86 provides 4kHz gain-bandwidth

More information

www.jameco.com 1-800-831-4242

www.jameco.com 1-800-831-4242 Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. LF411 Low Offset, Low Drift JFET Input Operational Amplifier General Description

More information

Voltage Output Temperature Sensor with Signal Conditioning AD22100

Voltage Output Temperature Sensor with Signal Conditioning AD22100 Voltage Output Temperature Sensor with Signal Conditioning AD22100 FEATURES 200 C temperature span Accuracy better than ±2% of full scale Linearity better than ±1% of full scale Temperature coefficient

More information

Low Power, Wide Supply Range, Low Cost Unity-Gain Difference Amplifiers AD8276/AD8277

Low Power, Wide Supply Range, Low Cost Unity-Gain Difference Amplifiers AD8276/AD8277 Data Sheet Low Power, Wide Supply Range, Low Cost Unity-Gain Difference Amplifiers AD87/AD877 FEATURES Wide input range beyond supplies Rugged input overvoltage protection Low supply current: μa maximum

More information

TS321 Low Power Single Operational Amplifier

TS321 Low Power Single Operational Amplifier SOT-25 Pin Definition: 1. Input + 2. Ground 3. Input - 4. Output 5. Vcc General Description The TS321 brings performance and economy to low power systems. With high unity gain frequency and a guaranteed

More information

TL084 TL084A - TL084B

TL084 TL084A - TL084B A B GENERAL PURPOSE JFET QUAD OPERATIONAL AMPLIFIERS WIDE COMMONMODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT OUTPUT SHORTCIRCUIT PROTECTION HIGH INPUT IMPEDANCE

More information

LM741. Single Operational Amplifier. Features. Description. Internal Block Diagram. www.fairchildsemi.com

LM741. Single Operational Amplifier. Features. Description. Internal Block Diagram. www.fairchildsemi.com Single Operational Amplifier www.fairchildsemi.com Features Short circuit protection Excellent temperature stability Internal frequency compensation High Input voltage range Null of offset Description

More information

DESCRIPTIO. LT1226 Low Noise Very High Speed Operational Amplifier

DESCRIPTIO. LT1226 Low Noise Very High Speed Operational Amplifier FEATRES Gain of Stable GHz Gain Bandwidth V/µs Slew Rate.6nV/ Hz Input Noise Voltage V/mV Minimum DC Gain, R L = Ω mv Maximum Input Offset Voltage ±V Minimum Output Swing into Ω ide Supply Range ±.V to

More information

160 MHz Rail-to-Rail Amplifier with Disable AD8041

160 MHz Rail-to-Rail Amplifier with Disable AD8041 16 MHz Rail-to-Rail Amplifier with Disable AD81 FEATURES Fully Specified for + V, +5 V, and 5 V Supplies Output Swings Rail to Rail Input Voltage Range Extends mv Below Ground No Phase Reversal with Inputs

More information

LF442 Dual Low Power JFET Input Operational Amplifier

LF442 Dual Low Power JFET Input Operational Amplifier LF442 Dual Low Power JFET Input Operational Amplifier General Description The LF442 dual low power operational amplifiers provide many of the same AC characteristics as the industry standard LM1458 while

More information

Use and Application of Output Limiting Amplifiers (HFA1115, HFA1130, HFA1135)

Use and Application of Output Limiting Amplifiers (HFA1115, HFA1130, HFA1135) Use and Application of Output Limiting Amplifiers (HFA111, HFA110, HFA11) Application Note November 1996 AN96 Introduction Amplifiers with internal voltage clamps, also known as limiting amplifiers, have

More information

LM118/LM218/LM318 Operational Amplifiers

LM118/LM218/LM318 Operational Amplifiers LM118/LM218/LM318 Operational Amplifiers General Description The LM118 series are precision high speed operational amplifiers designed for applications requiring wide bandwidth and high slew rate. They

More information

PowerAmp Design. PowerAmp Design PAD135 COMPACT HIGH VOLATGE OP AMP

PowerAmp Design. PowerAmp Design PAD135 COMPACT HIGH VOLATGE OP AMP PowerAmp Design COMPACT HIGH VOLTAGE OP AMP Rev G KEY FEATURES LOW COST SMALL SIZE 40mm SQUARE HIGH VOLTAGE 200 VOLTS HIGH OUTPUT CURRENT 10A PEAK 40 WATT DISSIPATION CAPABILITY 200V/µS SLEW RATE APPLICATIONS

More information

NTE923 & NTE923D Integrated Circuit Precision Voltage Regulator

NTE923 & NTE923D Integrated Circuit Precision Voltage Regulator NTE923 & NTE923D Integrated Circuit Precision Voltage Regulator Description: The NTE923 and NTE923D are voltage regulators designed primarily for series regulator applications. By themselves, these devices

More information

LM386 Low Voltage Audio Power Amplifier

LM386 Low Voltage Audio Power Amplifier Low Voltage Audio Power Amplifier General Description The LM386 is a power amplifier designed for use in low voltage consumer applications. The gain is internally set to 20 to keep external part count

More information

LF412 Low Offset Low Drift Dual JFET Input Operational Amplifier

LF412 Low Offset Low Drift Dual JFET Input Operational Amplifier LF412 Low Offset Low Drift Dual JFET Input Operational Amplifier General Description These devices are low cost high speed JFET input operational amplifiers with very low input offset voltage and guaranteed

More information

LM138 LM338 5-Amp Adjustable Regulators

LM138 LM338 5-Amp Adjustable Regulators LM138 LM338 5-Amp Adjustable Regulators General Description The LM138 series of adjustable 3-terminal positive voltage regulators is capable of supplying in excess of 5A over a 1 2V to 32V output range

More information

TSV6290, TSV6290A, TSV6291, TSV6291A

TSV6290, TSV6290A, TSV6291, TSV6291A Micropower with high merit factor CMOS operational amplifiers Features Low supply voltage: 1.5 V 5.5 V Rail-to-rail input and output Low input offset voltage: 800 µv max (A version) Low power consumption:

More information

CMOS 1.8 V to 5.5 V, 2.5 Ω SPDT Switch/2:1 Mux in Tiny SC70 Package ADG779

CMOS 1.8 V to 5.5 V, 2.5 Ω SPDT Switch/2:1 Mux in Tiny SC70 Package ADG779 CMO 1.8 V to 5.5 V, 2.5 Ω PT witch/2:1 Mux in Tiny C70 Package AG779 FEATURE 1.8 V to 5.5 V single supply 2.5 Ω on resistance 0.75 Ω on-resistance flatness 3 db bandwidth >200 MHz Rail-to-rail operation

More information

Description. 5k (10k) - + 5k (10k)

Description. 5k (10k) - + 5k (10k) THAT Corporation Low Noise, High Performance Microphone Preamplifier IC FEATURES Excellent noise performance through the entire gain range Exceptionally low THD+N over the full audio bandwidth Low power

More information

Precision Thermocouple Amplifiers with Cold Junction Compensation AD8494/AD8495/AD8496/AD8497

Precision Thermocouple Amplifiers with Cold Junction Compensation AD8494/AD8495/AD8496/AD8497 Precision Thermocouple Amplifiers with Cold Junction Compensation AD494/AD49/AD496/AD497 FEATURES Low cost and easy to use Pretrimmed for J or K type thermocouples Internal cold junction compensation High

More information

PS323. Precision, Single-Supply SPST Analog Switch. Features. Description. Block Diagram, Pin Configuration, and Truth Table. Applications PS323 PS323

PS323. Precision, Single-Supply SPST Analog Switch. Features. Description. Block Diagram, Pin Configuration, and Truth Table. Applications PS323 PS323 Features ÎÎLow On-Resistance (33-ohm typ.) Minimizes Distortion and Error Voltages ÎÎLow Glitching Reduces Step Errors in Sample-and-Holds. Charge Injection, 2pC typ. ÎÎSingle-Supply Operation (+2.5V to

More information

AP331A XX G - 7. Lead Free G : Green. Packaging (Note 2)

AP331A XX G - 7. Lead Free G : Green. Packaging (Note 2) Features General Description Wide supply Voltage range: 2.0V to 36V Single or dual supplies: ±1.0V to ±18V Very low supply current drain (0.4mA) independent of supply voltage Low input biasing current:

More information

SG2525A SG3525A REGULATING PULSE WIDTH MODULATORS

SG2525A SG3525A REGULATING PULSE WIDTH MODULATORS SG2525A SG3525A REGULATING PULSE WIDTH MODULATORS 8 TO 35 V OPERATION 5.1 V REFERENCE TRIMMED TO ± 1 % 100 Hz TO 500 KHz OSCILLATOR RANGE SEPARATE OSCILLATOR SYNC TERMINAL ADJUSTABLE DEADTIME CONTROL INTERNAL

More information

TL082 Wide Bandwidth Dual JFET Input Operational Amplifier

TL082 Wide Bandwidth Dual JFET Input Operational Amplifier TL082 Wide Bandwidth Dual JFET Input Operational Amplifier General Description These devices are low cost high speed dual JFET input operational amplifiers with an internally trimmed input offset voltage

More information

UA741. General-purpose single operational amplifier. Features. Applications. Description. N DIP8 (plastic package)

UA741. General-purpose single operational amplifier. Features. Applications. Description. N DIP8 (plastic package) General-purpose single operational amplifier Datasheet - production data N DIP8 (plastic package) D SO8 (plastic micropackage) Pin connections (top view) 1 - Offset null 1 2 - Inverting input 3 - Non-inverting

More information

Low Noise, Precision, High Speed Operational Amplifier (A VCL > 5) OP37

Low Noise, Precision, High Speed Operational Amplifier (A VCL > 5) OP37 a FEATURES Low Noise, 80 nv p-p (0.1 Hz to 10 Hz) 3 nv/ Hz @ 1 khz Low Drift, 0.2 V/ C High Speed, 17 V/ s Slew Rate 63 MHz Gain Bandwidth Low Input Offset Voltage, 10 V Excellent CMRR, 126 db (Common-Voltage

More information

DUAL/QUAD LOW NOISE OPERATIONAL AMPLIFIERS

DUAL/QUAD LOW NOISE OPERATIONAL AMPLIFIERS Order this document by MC3378/D The MC3378/9 series is a family of high quality monolithic amplifiers employing Bipolar technology with innovative high performance concepts for quality audio and data signal

More information

LM101A LM201A LM301A Operational Amplifiers

LM101A LM201A LM301A Operational Amplifiers LM101A LM201A LM301A Operational Amplifiers General Description The LM101A series are general purpose operational amplifiers which feature improved performance over industry standards like the LM709 Advanced

More information

TL074 TL074A - TL074B

TL074 TL074A - TL074B A B LOW NOISE JFET QUAD OPERATIONAL AMPLIFIERS WIDE COMMONMODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT LOW NOISE e n = 15nV/ Hz (typ) OUTPUT SHORTCIRCUIT PROTECTION

More information

CMOS 5 V/+5 V 4 Single SPDT Switches ADG619/ADG620

CMOS 5 V/+5 V 4 Single SPDT Switches ADG619/ADG620 a FEATURE (Max) On Resistance. (Max) On Resistance Flatness.7 V to 5.5 ingle upply.7 V to 5.5 V ual upply Rail-to-Rail Operation -Lead OT-3 Package, -Lead MOP Package Typical Power Consumption (

More information

Low Voltage Microphone Preamplifier with Variable Compression and Noise Gating SSM2167

Low Voltage Microphone Preamplifier with Variable Compression and Noise Gating SSM2167 Data Sheet Low Voltage Microphone Preamplifier with Variable Compression and Noise Gating SSM267 FEATURES PIN CONFIGURATION Complete microphone conditioner in a 0-lead package Single 3 V operation Low

More information

15 MHz Rail-to-Rail Operational Amplifiers OP162/OP262/OP462

15 MHz Rail-to-Rail Operational Amplifiers OP162/OP262/OP462 Data Sheet FEATURES Wide bandwidth: 5 MHz Low offset voltage: 35 µv max Low noise: 9.5 nv/ Hz @ khz Single-supply operation:.7 V to V Rail-to-rail output swing Low TCVOS: µv/ C typ High slew rate: 3 V/µs

More information

1 pc Charge Injection, 100 pa Leakage CMOS 5 V/5 V/3 V 4-Channel Multiplexer ADG604

1 pc Charge Injection, 100 pa Leakage CMOS 5 V/5 V/3 V 4-Channel Multiplexer ADG604 a FEATURES 1 pc Charge Injection (Over the Full Signal Range) 2.7 V to 5.5 V ual Supply 2.7 V to 5.5 ingle Supply Automotive Temperature Range: 4 C to +125 C 1 pa Max @ 25 C Leakage Currents 85 Typ On

More information

Low Voltage, Resistor Programmable Thermostatic Switch AD22105

Low Voltage, Resistor Programmable Thermostatic Switch AD22105 a Low Voltage, Resistor Programmable Thermostatic Switch AD22105 FEATURES User-Programmable Temperature Setpoint 2.0 C Setpoint Accuracy 4.0 C Preset Hysteresis Wide Supply Range (+2.7 V dc to +7.0 V dc)

More information

LM108 LM208 LM308 Operational Amplifiers

LM108 LM208 LM308 Operational Amplifiers LM108 LM208 LM308 Operational Amplifiers General Description The LM108 series are precision operational amplifiers having specifications a factor of ten better than FET amplifiers over a b55 C toa125 C

More information

Isolated AC Sine Wave Input 3B42 / 3B43 / 3B44 FEATURES APPLICATIONS PRODUCT OVERVIEW FUNCTIONAL BLOCK DIAGRAM

Isolated AC Sine Wave Input 3B42 / 3B43 / 3B44 FEATURES APPLICATIONS PRODUCT OVERVIEW FUNCTIONAL BLOCK DIAGRAM Isolated AC Sine Wave Input 3B42 / 3B43 / 3B44 FEATURES AC averaging technique used to rectify, amplify, and filter 50 Hz to 400 Hz sine-wave signals. Accepts inputs of between 20 mv to 550 V rms to give

More information

Description. Output Stage. 5k (10k) - + 5k (10k)

Description. Output Stage. 5k (10k) - + 5k (10k) THAT Corporation Low Noise, High Performance Audio Preamplifier IC FEATURES Low Noise: 1 nv/hz input noise (60dB gain) 34 nv/hz input noise (0dB gain) (1512) Low THD+N (full audio bandwidth): 0.0005% 40dB

More information

LM833 LOW NOISE DUAL OPERATIONAL AMPLIFIER

LM833 LOW NOISE DUAL OPERATIONAL AMPLIFIER LOW NOISE DUAL OPERATIONAL AMPLIFIER LOW VOLTAGE NOISE: 4.5nV/ Hz HIGH GAIN BANDWIDTH PRODUCT: 15MHz HIGH SLEW RATE: 7V/µs LOW DISTORTION:.2% EXCELLENT FREQUENCY STABILITY ESD PROTECTION 2kV DESCRIPTION

More information

Features. Modulation Frequency (khz) VDD. PLL Clock Synthesizer with Spread Spectrum Circuitry GND

Features. Modulation Frequency (khz) VDD. PLL Clock Synthesizer with Spread Spectrum Circuitry GND DATASHEET IDT5P50901/2/3/4 Description The IDT5P50901/2/3/4 is a family of 1.8V low power, spread spectrum clock generators capable of reducing EMI radiation from an input clock. Spread spectrum technique

More information

MADR-009190-0001TR. Quad Driver for GaAs FET or PIN Diode Switches and Attenuators Rev. 4. Functional Schematic. Features.

MADR-009190-0001TR. Quad Driver for GaAs FET or PIN Diode Switches and Attenuators Rev. 4. Functional Schematic. Features. Features High Voltage CMOS Technology Four Channel Positive Voltage Control CMOS device using TTL input levels Low Power Dissipation Low Cost Lead-Free SOIC-16 Plastic Package Halogen-Free Green Mold Compound

More information

High-Speed, 5 V, 0.1 F CMOS RS-232 Driver/Receivers ADM202/ADM203

High-Speed, 5 V, 0.1 F CMOS RS-232 Driver/Receivers ADM202/ADM203 a FEATURES kb Transmission Rate ADM: Small (. F) Charge Pump Capacitors ADM3: No External Capacitors Required Single V Power Supply Meets EIA-3-E and V. Specifications Two Drivers and Two Receivers On-Board

More information

Low-Cost, Micropower, SC70/SOT23-8, Microphone Preamplifiers with Complete Shutdown

Low-Cost, Micropower, SC70/SOT23-8, Microphone Preamplifiers with Complete Shutdown 9-9; Rev ; 4/ Low-Cost, Micropower, SC7/SOT23-8, Microphone General Description The are micropower op amps optimized for use as microphone preamplifiers. They provide the ideal combination of an optimized

More information

MIC4451/4452. General Description. Features. Applications. Functional Diagram V S. 12A-Peak Low-Side MOSFET Driver. Bipolar/CMOS/DMOS Process

MIC4451/4452. General Description. Features. Applications. Functional Diagram V S. 12A-Peak Low-Side MOSFET Driver. Bipolar/CMOS/DMOS Process 12A-Peak Low-Side MOSFET Driver Bipolar/CMOS/DMOS Process General Description MIC4451 and MIC4452 CMOS MOSFET drivers are robust, efficient, and easy to use. The MIC4451 is an inverting driver, while the

More information

MADR-009443-0001TR. Quad Driver for GaAs FET or PIN Diode Switches and Attenuators. Functional Schematic. Features. Description. Pin Configuration 2

MADR-009443-0001TR. Quad Driver for GaAs FET or PIN Diode Switches and Attenuators. Functional Schematic. Features. Description. Pin Configuration 2 Features Functional Schematic High Voltage CMOS Technology Four Channel Positive Voltage Control CMOS device using TTL input levels Low Power Dissipation Low Cost 4x4 mm, 20-lead PQFN Package 100% Matte

More information

AUDIO BALANCED LINE DRIVERS

AUDIO BALANCED LINE DRIVERS DRV DRV DRV DRV DRV AUDIO BALAED LINE DRIVERS FEATURES BALAED OUTPUT LOW DISTORTION:.% at f = khz WIDE OUTPUT SWING: Vrms into Ω HIGH CAPACITIVE LOAD DRIVE HIGH SLEW RATE: V/µs WIDE SUPPLY RANGE: ±.V to

More information

Op Amp Circuit Collection

Op Amp Circuit Collection Op Amp Circuit Collection Note: National Semiconductor recommends replacing 2N2920 and 2N3728 matched pairs with LM394 in all application circuits. Section 1 Basic Circuits Inverting Amplifier Difference

More information

CA723, CA723C. Voltage Regulators Adjustable from 2V to 37V at Output Currents Up to 150mA without External Pass Transistors. Features.

CA723, CA723C. Voltage Regulators Adjustable from 2V to 37V at Output Currents Up to 150mA without External Pass Transistors. Features. CA73, CA73C Data Sheet April 1999 File Number 788. Voltage Regulators Adjustable from V to 37V at Output Currents Up to 1mA without External Pass Transistors The CA73 and CA73C are silicon monolithic integrated

More information

Supertex inc. HV256. 32-Channel High Voltage Amplifier Array HV256. Features. General Description. Applications. Typical Application Circuit

Supertex inc. HV256. 32-Channel High Voltage Amplifier Array HV256. Features. General Description. Applications. Typical Application Circuit 32-Channel High Voltage Amplifier Array Features 32 independent high voltage amplifiers 3V operating voltage 295V output voltage 2.2V/µs typical output slew rate Adjustable output current source limit

More information

AD8253. 10 MHz, 20 V/μs, G = 1, 10, 100, 1000 icmos Programmable Gain Instrumentation Amplifier. Data Sheet FEATURES FUNCTIONAL BLOCK DIAGRAM

AD8253. 10 MHz, 20 V/μs, G = 1, 10, 100, 1000 icmos Programmable Gain Instrumentation Amplifier. Data Sheet FEATURES FUNCTIONAL BLOCK DIAGRAM Data Sheet 1 MHz, 2 V/μs, G = 1, 1, 1, 1 icmos Programmable Gain Instrumentation Amplifier FEATURES Small package: 1-lead MSOP Programmable gains: 1, 1, 1, 1 Digital or pin-programmable gain setting Wide

More information

LM139/LM239/LM339/LM2901/LM3302 Low Power Low Offset Voltage Quad Comparators

LM139/LM239/LM339/LM2901/LM3302 Low Power Low Offset Voltage Quad Comparators Low Power Low Offset Voltage Quad Comparators General Description The LM139 series consists of four independent precision voltage comparators with an offset voltage specification as low as 2 mv max for

More information

Low Power, 3.3 V, RS-232 Line Drivers/Receivers ADM3202/ADM3222/ADM1385

Low Power, 3.3 V, RS-232 Line Drivers/Receivers ADM3202/ADM3222/ADM1385 Low Power, 3.3 V, RS-232 Line Drivers/Receivers ADM3202/ADM3222/ADM35 FEATURES 460 kbps data rate Specified at 3.3 V Meets EIA-232E specifications 0. μf charge pump capacitors Low power shutdown (ADM3222

More information

CA3420. Features. 0.5MHz, Low Supply Voltage, Low Input Current BiMOS Operational Amplifier. Applications. Functional Diagram. Ordering Information

CA3420. Features. 0.5MHz, Low Supply Voltage, Low Input Current BiMOS Operational Amplifier. Applications. Functional Diagram. Ordering Information CA Data Sheet October, FN.9.MHz, Low Supply Voltage, Low Input Current BiMOS Operational Amplifier The CA is an integrated circuit operational amplifier that combines PMOS transistors and bipolar transistors

More information

PART MAX477EUA MAX477ESA MAX477 V OUT OUT. Maxim Integrated Products 1

PART MAX477EUA MAX477ESA MAX477 V OUT OUT. Maxim Integrated Products 1 9-67; Rev 3; /99 EVALUATION KIT MANUAL FOLLOWS DATA SHEET 3MHz High-Speed Op Amp General Description The is a ±5V wide-bandwidth, fast-settling, unity-gain-stable op amp featuring low noise, low differential

More information

Advanced Monolithic Systems

Advanced Monolithic Systems Advanced Monolithic Systems FEATURES Three Terminal Adjustable or Fixed oltages* 1.5, 1.8, 2.5, 2.85, 3.3 and 5. Output Current of 1A Operates Down to 1 Dropout Line Regulation:.2% Max. Load Regulation:.4%

More information

Quad, Rail-to-Rail, Fault-Protected, SPST Analog Switches

Quad, Rail-to-Rail, Fault-Protected, SPST Analog Switches 19-2418; Rev ; 4/2 Quad, Rail-to-Rail, Fault-Protected, General Description The are quad, single-pole/single-throw (SPST), fault-protected analog switches. They are pin compatible with the industry-standard

More information

LM1084 5A Low Dropout Positive Regulators

LM1084 5A Low Dropout Positive Regulators 5A Low Dropout Positive Regulators General Description The LM1084 is a series of low dropout voltage positive regulators with a maximum dropout of 1.5 at 5A of load current. It has the same pin-out as

More information

LM117 LM317A LM317 3-Terminal Adjustable Regulator

LM117 LM317A LM317 3-Terminal Adjustable Regulator LM117 LM317A LM317 3-Terminal Adjustable Regulator General Description The LM117 series of adjustable 3-terminal positive voltage regulators is capable of supplying in excess of 1 5A over a 1 2V to 37V

More information

LM381 LM381A Low Noise Dual Preamplifier

LM381 LM381A Low Noise Dual Preamplifier LM381 LM381A Low Noise Dual Preamplifier General Description The LM381 LM381A is a dual preamplifier for the amplification of low level signals in applications requiring optimum noise performance Each

More information

Chapter 12: The Operational Amplifier

Chapter 12: The Operational Amplifier Chapter 12: The Operational Amplifier 12.1: Introduction to Operational Amplifier (Op-Amp) Operational amplifiers (op-amps) are very high gain dc coupled amplifiers with differential inputs; they are used

More information

Features. Symbol JEDEC TO-220AB

Features. Symbol JEDEC TO-220AB Data Sheet June 1999 File Number 2253.2 3A, 5V,.4 Ohm, N-Channel Power MOSFET This is an N-Channel enhancement mode silicon gate power field effect transistor designed for applications such as switching

More information

AD8601/AD8602/AD8604. Precision CMOS, Single-Supply, Rail-to-Rail, Input/Output Wideband Operational Amplifiers FEATURES PIN CONFIGURATIONS

AD8601/AD8602/AD8604. Precision CMOS, Single-Supply, Rail-to-Rail, Input/Output Wideband Operational Amplifiers FEATURES PIN CONFIGURATIONS Precision CMOS, Single-Supply, Rail-to-Rail, Input/Output Wideband Operational Amplifiers AD86/AD862/AD864 FEATURES Low offset voltage: 5 μv maximum Single-supply operation: 2.7 V to 5.5 V Low supply current:

More information

TDA2040. 20W Hi-Fi AUDIO POWER AMPLIFIER

TDA2040. 20W Hi-Fi AUDIO POWER AMPLIFIER 20W Hi-Fi AUDIO POWER AMPLIFIER DESCRIPTION The TDA2040 is a monolithic integrated circuit in Pentawatt package, intended for use as an audio class AB amplifier. Typically it provides 22W output power

More information

MADR-009269-0001TR. Single Driver for GaAs FET or PIN Diode Switches and Attenuators Rev. V1. Functional Schematic. Features.

MADR-009269-0001TR. Single Driver for GaAs FET or PIN Diode Switches and Attenuators Rev. V1. Functional Schematic. Features. Features High Voltage CMOS Technology Complementary Outputs Positive Voltage Control CMOS device using TTL input levels Low Power Dissipation Low Cost Plastic SOIC-8 Package 100% Matte Tin Plating over

More information

Dual Precision, Low Power BiFET Op Amp AD648 CONNECTION DIAGRAMS

Dual Precision, Low Power BiFET Op Amp AD648 CONNECTION DIAGRAMS a FEATURES DC Performance 400 A max Quiescent Current 10 pa max Bias Current, Warmed Up (AD648C) 300 V max Offset Voltage (AD648C) 3 V/ C max Drift (AD648C) 2 V p-p Noise, 0.1 Hz to 10 Hz AC Performance

More information

JFET Input Instrumentation Amplifier with Rail-to-Rail Output in MSOP Package AD8220

JFET Input Instrumentation Amplifier with Rail-to-Rail Output in MSOP Package AD8220 JFET Input Instrumentation Amplifier with Rail-to-Rail Output in MSOP Package AD8 FEATURES Low input currents pa maximum input bias current (B grade).6 pa maximum input offset current (B grade) High CMRR

More information

Dual Bipolar/JFET, Audio Operational Amplifier OP275

Dual Bipolar/JFET, Audio Operational Amplifier OP275 Dual Bipolar/JFET, Audio Operational Amplifier OP7 FEATURES Excellent Sonic Characteristics Low Noise: nv/ Hz Low Distortion:.% High Slew Rate: V/ s Wide Bandwidth: 9 MHz Low Supply Current: ma Low Offset

More information

28V, 2A Buck Constant Current Switching Regulator for White LED

28V, 2A Buck Constant Current Switching Regulator for White LED 28V, 2A Buck Constant Current Switching Regulator for White LED FP7102 General Description The FP7102 is a PWM control buck converter designed to provide a simple, high efficiency solution for driving

More information

CMOS 1.8 V to 5.5 V, 2.5 2:1 Mux/SPDT Switch in SOT-23 ADG719

CMOS 1.8 V to 5.5 V, 2.5 2:1 Mux/SPDT Switch in SOT-23 ADG719 a FEATURE 1.8 V to 5.5 ingle upply 4 (Max) On Resistance.75 (Typ) On Resistance Flatness Automotive Temperature Range: 4 C to +125 C 3 db Bandwidth > 2 MHz Rail-to-Rail Operation 6-Lead OT-23 Package and

More information

INTEGRATED CIRCUITS DATA SHEET. TDA7000 FM radio circuit. Product specification File under Integrated Circuits, IC01

INTEGRATED CIRCUITS DATA SHEET. TDA7000 FM radio circuit. Product specification File under Integrated Circuits, IC01 INTEGRATED CIRCUITS DATA SHEET File under Integrated Circuits, IC01 May 1992 GENERAL DESCRIPTION The is a monolithic integrated circuit for mono FM portable radios, where a minimum on peripheral components

More information

Current vs. Voltage Feedback Amplifiers

Current vs. Voltage Feedback Amplifiers Current vs. ltage Feedback Amplifiers One question continuously troubles the analog design engineer: Which amplifier topology is better for my application, current feedback or voltage feedback? In most

More information

High-Speed, 5 V, 0.1 F CMOS RS-232 Drivers/Receivers ADM222/ADM232A/ADM242

High-Speed, 5 V, 0.1 F CMOS RS-232 Drivers/Receivers ADM222/ADM232A/ADM242 a FEATURES 200 kb/s Transmission Rate Small (0. F) Charge Pump Capacitors Single V Power Supply Meets All EIA-232-E and V.2 Specifications Two Drivers and Two Receivers On-Board DC-DC Converters V Output

More information

ICS650-44 SPREAD SPECTRUM CLOCK SYNTHESIZER. Description. Features. Block Diagram DATASHEET

ICS650-44 SPREAD SPECTRUM CLOCK SYNTHESIZER. Description. Features. Block Diagram DATASHEET DATASHEET ICS650-44 Description The ICS650-44 is a spread spectrum clock synthesizer intended for video projector and digital TV applications. It generates three copies of an EMI optimized 50 MHz clock

More information

High-Speed, Low-Power, 3V/5V, Rail-to-Rail, Single-Supply Comparators MAX941/MAX942/ MAX944. General Description. Features. Ordering Information

High-Speed, Low-Power, 3V/5V, Rail-to-Rail, Single-Supply Comparators MAX941/MAX942/ MAX944. General Description. Features. Ordering Information General Description The MAX941/MAX94/ are single/dual/quad highspeed comparators optimized for systems powered from a 3V or 5V supply. These devices combine high speed, low power, and rail-to-rail inputs.

More information

Obsolete Product(s) - Obsolete Product(s)

Obsolete Product(s) - Obsolete Product(s) 32 W hi-fi audio power amplifier Features High output power (50 W music power IEC 268.3 rules) High operating supply voltage (50 V) Single or split supply operations Very low distortion Short-circuit protection

More information

LM2902. Low-power quad operational amplifier. Features. Description

LM2902. Low-power quad operational amplifier. Features. Description Low-power quad operational amplifier Datasheet production data Features Wide gain bandwidth: 1.3 MHz Input common-mode voltage range includes negative rail Large voltage gain: 100 db Very low supply current

More information

PI5A100. Precision, Wide-Bandwidth Quad SPDT Analog Switch. Description. Features. Block Diagram, Pin Configuration. Applications.

PI5A100. Precision, Wide-Bandwidth Quad SPDT Analog Switch. Description. Features. Block Diagram, Pin Configuration. Applications. Precision, Wide-Bandwidth Quad SPDT Analog Switch Features Single Supply Operation (+2V to +6V) Rail-to-Rail Analog Signal Dynamic Range Low On-Resistance (6Ω typ with 5V supply) Minimizes Distortion and

More information

ICS514 LOCO PLL CLOCK GENERATOR. Description. Features. Block Diagram DATASHEET

ICS514 LOCO PLL CLOCK GENERATOR. Description. Features. Block Diagram DATASHEET DATASHEET ICS514 Description The ICS514 LOCO TM is the most cost effective way to generate a high-quality, high-frequency clock output from a 14.31818 MHz crystal or clock input. The name LOCO stands for

More information

Dual 20W Audio Power Amplifier with Mute and Standby Modes

Dual 20W Audio Power Amplifier with Mute and Standby Modes LM1876 Overture Audio Power Amplifier Series Dual 20W Audio Power Amplifier with Mute and Standby Modes General Description The LM1876 is a stereo audio amplifier capable of delivering typically 20W per

More information

LM741 Operational Amplifier

LM741 Operational Amplifier Operational Amplifier General Description The LM741 series are general purpose operational amplifiers which feature improved performance over industry standards like the LM709. They are direct, plug-in

More information