SECTION REFERENCE. Custom Arch Windows Custom Shapes and Sizes

Transcription

1 400 Series Specialty Windows SECTION REFERENCE Circle Top, Quarter Round, Elliptical, Full Chord, Circle, Oval, Gothic, Octagon, Monumental Quarter & Full Round Windows Tables of Sizes Opening Specifi cations Divided Light Patterns Window Details Joining Details Custom Arch Windows Custom Shapes and Sizes Arch, Springline & Springline Flanker Windows Tables of Sizes Opening Specifi cations Divided Light Patterns Window Details Flexiframe Windows Custom Shapes and Sizes Window Details Joining Details

2 SPECIALTY WINDOWS Features FRAME A Wood frame members are treated with a water-repellent wood preservative for long-lasting * protection and performance. Radii are made of laminated select hardwood, offering improved strength and appearance. B The lineal sections of the jamb and sill on Flexiframe, custom arch, arch and enhancement windows are covered with a low-maintenance, fiberglass reinforced composite. The arched head members, and Springline units, are covered with stretch formed aluminum. C The vinyl anchoring flange on Flexiframe, custom arch, arch, Springline, and enhancement units extends 1 1 /4" around the entire perimeter of the unit. It helps secure the unit to the structure. D Circle Top, quarter round, elliptical, circle and oval windows are covered with a rigid vinyl (PVC) pre-formed sheath. Low-maintenance exterior cladding provides long-lasting * beauty. F E Pre-formed rigid vinyl sheath on the Circle Top, quarter round, elliptical, circle and oval window frames forms a full perimeter flange for sealing the unit to the structure. It also helps maintain an attractive appearance while minimizing maintenance. A G H C Arch Window B F Inside trim stop is made of unfinished pine. Arched trim stops are made with quality, full-length, select hardwood laminations. Units are shipped with the trim stops tacked on, so removal is easy expediting finishing and joining procedures. G Unfinished interior wood glazing stops help secure the glass in place. Arched glazing stops are made with full-length select hardwood laminations. A F G H E GLASS Circle Top Window H High-Performance glass options include: Low-E4 glass Low-E4 SmartSun glass Low-E4 Sun glass Tempered glass and other glass options are available. Contact your supplier. (Glass option must be specified.) D PATTERNED GLASS Patterned glass options are available. See page 12 for more details. Specialty windows are available with Stormwatch protection. For a copy of the Coastal Product Guide, contact your supplier. * For complete information on our limited warranties, visit andersenwindows.com or contact your supplier. Exterior Specify a unit exterior option and an interior option to complete your order. Interior Naturally occurring variations in grain, color and texture make each window one-of-a-kind. White Sandtone Terratone Forest Green white pine Flexiframe Window Springline Window Circle/Oval Window 120

3 Accessories Sold Separately. FRAME Interior Arch Casing* Available in colonial or ranch styles. Two transition blocks come with each arch casing. Arch window casings come with plinth blocks. The 16' casing for custom arch comes with two plinth blocks and a key block. For details, see the Architectural products section of this catalog, pages For easy integration and consistency, casing dimensions are consistent with Wood Moulding and Millwork Producers Association specifications. Plinth Blocks For enhancing casing transitions. Decorated with a radial sunburst, or use the reverse side flush face. Extension s Specify extension jambs when ordering. Standard unit jamb depth is 2 7 /8", except for elliptical and double-hung Circle Top units, which are 4 1 /2". Pine (or continuous laminated select hardwood) extension jambs are available for the following wall thicknesses: 4 9 /16" 5 1 /4" 6 9 /16" 7 1 /8" Some sizes may be pine veneer. Springline window extension jambs and transition pieces are applied when ordered with the unit (key component block is also applied to units with a 48" radius). Auxiliary Extension s Use auxiliary extension jambs for joining arch windows over casement or alongside awning windows. Available for the following wall thicknesses: For arch windows: 2 7 /8" x 4" size for use with 2 1 /4" and 2 1 /2" casing, 3 7 /8" x 5 1 /4" size for use with 3 1 /2" casing. Key Block Excellent for creating unique trim designs or accents at arch casing transitions. A key block comes with the 16' custom arch casing, and is an option for circle and oval windows. 400 Series Specialty Windows 2 1 /4" Colonial style, in oak and select hardwoods. WM366. For Circle Top, elliptical, circle and oval windows: 2 7 /8" size for use with 2 1 /4" and 2 1 /2" casing, 3 7 /8" size for use with 3 1 /2" casing. GLASS Art Glass art glass panels come in eleven original patterns, including four Frank Lloyd Wright Series designs. See page 139 for details on art glass or visit andersenwindows.com/artglass for pattern information. Transition Piece Two transition pieces come with the interior arch casing extension jambs, providing a beautiful accent for circle and oval windows. NEW 4 9 /16" 5 1 /4" 6 9 /16" 7 1 /8" 2 1 /2" Colonial style, in oak and select hardwoods. WM351. EXTERIOR TRIM Select Specialty windows are now available with Exterior Trim. Contact your supplier for details. 3 1 /2" Colonial style, in oak and select hardwoods. WM444. * Select hardwoods for specialty window interior arch casing include Hard Maple, Red Maple, European Birch, White Poplar and White Aspen. The specific species used will be dependent upon availability. CAUTION: Painting and staining may cause damage to rigid vinyl. For more information about glass, patterned glass, art glass, grilles and installation accessories, see pages or visit andersenwindows.com Frank Lloyd Wright is a registered trademark of the Frank Lloyd Wright Foundation. 2 1 /4" Ranch style, in oak and select hardwoods. WM /2" Ranch style, in select hardwoods. WM315. Products in Sandtone or Terratone color may be painted any color lighter than Terratone using quality oil-base or latex paint. Submit color samples to for approval when painting White. Submit color samples to for approval when painting Sandtone or Terratone any color darker than Terratone. Do not paint Forest Green exterior. Creosote-based stains should not come in contact with products. Do not paint weatherstripping. Abrasive cleaners or solutions containing corrosive solvents should not be used on products. For vinyl painting instructions and preparation, contact your supplier. does not warrant the adhesion of paint to vinyl. 121

4 SPECIALTY WINDOWS Table of Circle Top and Full Chord Window Sizes Double-Hung Window Dimension 2'-1 5 8" 2'-5 5 8" 2'-9 5 8" 3'-1 5 8" 3'-5 5 8" 2'-2 1 8" 2'-6 1 8" 2' " 3'-2 1 8" 3'-6 1 8" (Circle Top) " " " " " 1' " 1'-3 3 4" " CTN20 1' " 1'-5 3 4" " CTN24 1' " 1'-7 3 4" " CTN28 1' " 1'-9 3 4" " CTN30 1' " 1' " " CTN34 (Full Chord) " " " Radius " 24" 24" 20210, 2032, 2036, 20310, 2042, 2046, 20410, 2052, 2056, 20510, 2062, 2072, , 2432, 2436, 24310, 2442, 2446, 24410, 2452, 2456, 24510, 2462, 2472, " 11" 5 3 4" 28210, 2832, 2836, 28310, 2842, 2846, 28410, 2852, 2856, 28510, 2862, 2872, 2876 FCD " 9 5 8" 4 3 8" 30210, 3032, 3036, 30310, 3042, 3046, 30410, 3052, 3056, 30510, 3062, 3072, 3076 FCD30 1' " 1'-0 5 8" " 34210, 3432, 3436, 34310, 3442, 3446, 34410, 3452, 3456, 34510, 3462, 3472, 3476 FCD34 Table of Circle Top, Quarter Round, and Full Chord Window Sizes Casement/Awning Window Dimension 2'-0 1 8" 2'-4 3 8" 2'-7 1 2" 2' " 2'-0 5 8" 2'-4 7 8" 2'-8" " " " " 1'-2 3 8" 1'-2 7 8" 9 3 4" CTC1 1'-4 1 2" 1'-5" " CTCW1 1'-6 " 1'-6 1 2" " CTCX1 1'-8 1 4" 1'-8 3 4" " CTCXW1 Compatible double-hung, casement, awning, and picture windows are shown below 2'-0 1 8" 2'-0 5 8" " C12, C125, C13, C135, C14, C145, C15, C155, C16, CTR2010, AR21, AN21, A21, AW21, A212, A213 CTQC1 2'-4 3 8" 2'-4 7 8" " CW12, CW125, CW13, CW135, CW14, CW145, CW15, CW155, CW16, CTR2410, AR251, AN251, A251, AW251, AX251 CTQCW1 2'-7 1 2" 2'-8" " CX125, CX13, CX135, CX14, CX145, CX15, CX155, CX16, CTR2810, AR281, AN281, A281, AW281, AX281, AXW281 CTQCX1 2' " 1'-1 3 8" 1'-1 7 8" " (Full Chord) Radius " CXW13, CXW135, CXW14, CXW145, CXW15, CXW155, CXW16, P3030, P3035, P3040, P3045, P3050, P3055, P3060, AR31, AN31, A31, AW31, AX31, A335, AP32, A312, A313, PA3050, PA3060, AXW31, AXW312 CTQA " " FCCXW3 shaped windows. Divided light patterns shown on page 124. "Window Dimension" always refers to outside frame to frame dimension. " " dimensions may need to be increased to allow for use brackets, fasteners or other items. See page 33 for more details. Double-Hung Circle Top Glass Area Casement Circle Top Glass Area Quarter Round Glass Area Full Chord Glass Area Window Number Glass Area Sq.Ft. CTN Window Number Glass Area Sq.Ft. CTC1 1.0 Window Number Glass Area Sq.Ft. CTQC1 1.9 Window Number Glass Area Sq.Ft. FCD CTN CTCW1 1.5 CTQCW1 3.0 FCD CTN CTCXW1 2.7 CTQA3 5.2 FCD CTN CTC2 5.1 CTQCX1 3.8 FCD CTN CTCW2 7.3 FCCXW CTN CTC FCC CTN CTCX1 2.0 FCCW CTCX2 9.3 FCFW FCFW

5 3'-9 5 8" 5' " 6' " 3' " 5'-7 7 8" 6'-3 7 8" " " " " Radius 10" 4 3 4" " 3'-0" 31" , , , , , , , , , , , , CTN28-2 3'-4" 3'-4 1 2" " , , , , , , , , , , , , CTN30-2 Compatible double-hung, casement, awning, and picture windows are shown below shaped windows. 400 Series Specialty Windows 38210, 3832, 3836, 38310, 3842, 3846, 38410, 3852, 3856, 38510, 3862, 3872, 3876 FCD38 Divided light patterns shown on page '-8 1 2" 5'-2 3 4" 5' " 4'-0 1 2" 4'-9" 5'-3 1 4" 6'-0 3 8" " " " " 2' " " 2'-2 7 8" " " (Full Chord) Radius 6" CTR4010, CTR22010, C22, C225, C23, C235,C24, C245, C25, C255, AR41, AN41, A41, AW41, AX41, AXW41, AR221,AN221, A221, AW221, AP42V, AP4060, P4030, P4035, P4040, P4045, P4050, P4055, P4060, PTR4010, CTC2 FCC2 2' " 2'-7 1 8" " CTR4810, CTR22410, CW22, CW225, CW23, CW235, CW24, CW245, CW25, CW255, CW26, AR2251, AN2251, A2251, AW2251, AX2251 CTCW " " " 36" 1' " 1'-2 1 4" 9" FCCW2 2'-9 5 8" 2' " 29" CTR5210, CTR22810, CX23, CX235, CX24, CX245, CX25, AR2281, AN2281, A2281, AW2281, AX2281, AX2281 CTCX2 3'-2 1 4" 3'-2 3 4" " CTR6010, CRT32010, C32, C325, C33, C335, C34, C345, C35, C355, C36, P6030, P6035, P6040, P6045, P6050, AR61, AN61, A61, AW61, AX61, AXW61, AR321, AN321, A321, AW3231, PTR6010 CTC3 "Window Dimension" always refers to outside frame to frame dimension. " " dimensions may need to be increased to allow for use of building Elliptical Glass Area Circle & Oval Glass Area Gothic & Octagon Glass Area Monumental Quarter Round and Full Round Glass Area Window Number Glass Area Sq.Ft. ET6 4.3 Window Number Glass Area Sq.Ft. CIR Window Number Glass Area Sq.Ft. GT Window Number Glass Area Sq.Ft. QR ET8 8.0 CIR GT FR CIR GT FR OVL GT OVL OC OVL OC OC

6 SPECIALTY WINDOWS Table of Full Chord Window Sizes Patio Doors Window Dimension 4' " 5' " 4' " 5' " Compatible patio doors are " " shown below shaped windows. Radius 36" 48" Divided light patterns shown 1' " 1'-4 1 8" " FCFW " 1'-4 3 8" " FCFW60 below. FWG5068, FWG50611, FWG5080, FWH5068, FWH50611, FWH5080, FWO5068, FWO50611, FWO5080, NLGD5068, NLGD50611, NLGD5080, PS5068, ISPD5068, ISPD50611, ISPD5076, ISPD5080 FWG6068, FWG60611, FWG6080, FWH6068, FWH60611, FWH6080, FWO6068, FWO60611, FWO6080, NLGD6068, NLGD60611, NLGD6080, ISPD6068, ISPD60611, ISPD6076, ISPD6080 Table of Elliptical Window Sizes Patio Doors Window Dimension 5' " 7' " 6'-0" 8'-0" " " 1'-4 3 4" 1'-5 3 8" " ET6 1'-9" 1'-9 5 8" " ET8 FWG6068, FWG60611, FWG6080, FWH6068, FWH60611, FWH6080, FWO6068, FWO60611, FWO6080, NLGD6068, NLGD60611, NLGD6080, ISID6068, ISID60611, ISID6076, ISID6080 FWG8068, FWG80611, FWG8080, FWH8068, FWH80611, FWH8080, NLGD8068, NLGD80611, NLGD8080 "Window Dimension" always refers to outside frame to frame dimension. " " dimensions may need to be increased to allow for use brackets, fasteners or other items. See page 33 for more details. Divided Light Patterns Renaissance Colonial Renaissance Sunburst Number of lights and overall pattern varies with window size. Full Chord Circle Oval Gothic Circle Top & Quarter Round Elliptical Monumental Quarter Round Specialty window patterns may not align with picture windows patterns when horizontally joined. For more information on divided light see page 13 or visit andersenwindows.com/grilles. Octagon Monumental Circle 124 Custom Pattern Examples

7 Table of Circle Window Sizes Table of Oval Window Sizes Window Dimension 2'-0 1 8" 2'-4 3 8" 2' " Window Dimension 1'-7 3 4" 2'-0" 3'-0" 2'-0 5 8" 2'-4 7 8" 1'-8 1 4" 2'-0 1 2" " 24" " " " " CIR20 CIR24 CIR30 2'-4 3 8" 2'-4 7 8" 24" OVL1824 2' " " OVL2030 4'-8 1 2" 4'-9" " OVL Series Specialty Windows Oval windows can be installed either vertically or horizontally. OVL1824 Key Block Dowel Circle, oval, gothic, octagon and monumental glass area tables shown on page 123. Key Component Typical key block kit installation. Divided light patterns shown on page 124. Table of Gothic Window Sizes Window Dimension 2'-0 1 8" 2'-4 3 8" 2' " 2'-0 5 8" 2'-4 7 8" 4'-0 1 2" " " " " 3'-6" Radius 3'-6 1 2" " Chord Shoulder " " " " 36" 48" 4'-0 1 2" " " " 4'-6" 4'-6 1 2" GT2036 GT2440 GT3046 GT " " 36" 5'-6" 5'-6 1 2" " " 48" Table of Octagon Window Sizes Window Dimension 2'-0" 2'-4" 3'-0" Table of Monumental Quarter & Full Round Window Sizes Window Dimension 6'-0" 2'-0 1 2" 2'-4 1 2" 4'-0 1 2" 4'-0 1 2" 6'-0 1 2" " " " " " " Radius 48" 24" 36" OC20 OC24 OC30 "Window Dimension" always refers to outside frame to frame dimension. " " dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See page 33 for more details. QR40 FR40 FR60 125

8 SPECIALTY WINDOWS Double-Hung Circle Top Window Detail Casement/Awning Circle Top Window Detail Casement/Awning Quarter Round Window Detail " (33) 4 1 2" (114) " (33) " (116) Width " (33) " (116) Width Min. Unit Dimension 2 5 8" (67) 2 3 8" (60) Min. Unit Dimension 2 1 4" (57) Extension s 2 1 4" (57) Min. Unit Dimension 2 1 4" (57) Extension s 2 1 8" (54) Full Chord Window Details Gothic Window Details Octagon Window Details Flexible Drip Cap by Others Flexible Drip Cap by Others Min. Unit Dimension Min. Unit Dimension Min. Unit Dimension Unit Dimension Width Min. Width Unit Dimension Width Min. Width Unit Dimension Width Width Horizontal Section Horizontal Section Horizontal Section 4 9 /16" jamb width measurement is from backside of installation flange. Light-colored areas are parts included with window. Dark-colored areas are additional parts required to complete window assembly as shown. Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on page 33. Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. 126

9 Elliptical Window Detail Circle Window Detail Oval Window Detail " (33) 4 1 2" (114) " (33) " (116) Width " (33) " (116) Width Min. Unit Dimension 2 1 2" (64) 2" (51) Unit Dimension Key Block Standard Transition Block Extension s and Transition Pieces Interior Arch Casing and Transition Pieces Unit Dimension Key Block Standard Transition Block Extension s and Transition Pieces Interior Arch Casing and Transition Pieces 400 Series Specialty Windows Monumental Quarter Round Window Details Monumental Full Round Window Details Flexible Drip Cap by Others Flexible Drip Cap by Others Min. Unit Dimension Min. Unit Dimension Unit Dimension Width Min. Width Unit Dimension Width Min. Width Horizontal Section Horizontal Section 4 9 /16" jamb width measurement is from backside of installation flange. Light-colored areas are parts included with window. Dark-colored areas are additional parts required to complete window assembly as shown. Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on page 33. Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. 127

10 SPECIALTY WINDOWS Horizontal (stack) Non-Reinforced Joining Details Casement Circle Top over Casement Window Overall Window Dimension Sum of individual window heights plus 1 8" for each join. Overall Overall window dimension height plus 5 8". Double-Hung Circle Top over Tilt-Wash Double-Hung Window Overall Window Dimension Sum of individual window heights plus 0" for each join. Overall Overall window dimension height plus 3 8". Unit Dim. 1 8" (3) 2 5 8" (67) 2 7 8" (73) 4 7 8" (124) Unit Dim. Unit Dim. Unit Dim. Double-Hung Circle Top over Narroline Double-Hung Window Overall Window Dimension Sum of individual window heights minus 3 8" for each join. Overall Overall window dimension height minus 5 16". Elliptical Window over Frenchwood Hinged Inswing Patio Door Overall Unit Dimension Sum of individual unit heights plus 1 8". Overall Overall unit dimension height plus 1". -3 8" (-10) Unit Dim. Unit Dim " (124) Unit Dim. 1 8" (3) Unit Dimension 8 1 4" (210) Elliptical Window over Frenchwood Gliding Patio Door Overall Unit Dimension Sum of individual unit heights plus 3 8". Overall Overall unit dimension height plus 5 8". Elliptical Window over Perma-Shield Gliding Patio Door Overall Unit Dimension Sum of individual unit heights plus 3 8". Overall Overall unit dimension height plus 5 8". 3 8" (10) Unit Dim. Unit Dimension " (214) 3 8" (10) Unit Dim. Unit Dimension 6 3 4" (171) For more joining information see the combination design section starting on page 259. Light-colored areas are parts included with window. Dark-colored areas are additional parts required to complete window assembly as shown. Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on page 33. Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. Consult with an architect or structural engineer regarding minimum requirements for structural support members between adjacent rough openings. 128

11 Custom Arch Windows Design Criteria Listed below are some factors that must be considered when deciding on a custom arch size and shape. For specific design criteria, joining guidelines and order information, contact your supplier. Arch Unequal Leg Arch Partial Chord offers even greater design flexibility with customdimensioned arches, unequal leg arches and partial chords along with expanded arch capabilites to achieve Springline window expressions. Custom arch windows can be designed using one of 10 standard radii, further expanding the existing line of 90 standard sizes of arch windows. Do all calculations in inches to 3 decimal places Order extension jambs along with windows for correct sizing Design windload considerations may affect spacing dimensions and patterns All units are stationary Maximum standard glass area of 60 sq. ft. Ten standard radii (18 3 4", 2', ", ", 3', 4', 5', 6', 8' and 16') 400 Series Specialty Windows Springline Window Expressions 16' Radius for Combinations Maximum radii (based on available radius piece length, contact supplier for specific information) Maximum equal leg width (36 3 / 4 " for 18 3 / 4 " radius to 12' for 16' radius) Maximum unequal leg width (18 3 / 4 " for 18 3 / 4 " radius to 11'-2" for 16' radius) Maximum partial chord width (18 3 / 4 " for 18 3 / 4 " radius to 11'-5 1 / 2 " for 16' radius) Only one dimension, height or width, can exceed 7'-0" No height dimension greater than 12'-0" No leg dimension less than 6" Custom arch shapes and sizes are specially constructed to be used FEET in combination with other windows including casement, awning, double-hung, gliding and Flexiframe windows and hinged or gliding patio doors "R 2'R "R Color coordinate with any project. Arches are available in White, "R Sandtone, Terratone and Forest Green colors. divided light is available for most styles and sizes. Contact your supplier for availability. 5'R 6'R 3'R 8'R 4'R 16'R Colonial Renassiance "R (3'-0 3 4") 2'R (3' ") "R (5'-3 3 4") "R (5'-7 3 4") 3'R (5' ) 4'R (7' ") 5'R (5'-0") 6'R (6'-0 5 8") 8'R (8'-0 1 8") 16'R (12') Standard Radii for Custom Arch Maximum Width for Equal Leg Arch. 129

12 SPECIALTY WINDOWS Table of Archtop Window Sizes Window Width Dimension 2'-0 1 8" 2'-4 3 8" 2' " Notes on the next page also apply to this page. 4'-8 1 2" 4' " 5' " 2'-0 5 8" 2'-4 7 8" 4'-0 1 2" 4'-9" 4' " 5' " " " " " " " " Window height shown in table = window height + 1 2" = window height 4 3 4" CUSTOM SIZES AVAILALBLE CUSTOM SIZES AVAILALBLE Radius 2' 2' 3' 4' 5' 5' 6' Chord Shoulder 12" 6" 2'-0 1 8" 2' " 3' " 3 1 4" 9 1 4" 1'-3 1 4" 2'-3 3 8" 3' " 3' " AFC106 AFCW106 AFCP3006 AFC206 AFCW206 AFFW5006 AFFW6006 AFC11 AFCW11 AFCP301 AFC21 AFCW21 AFFW501 AFFW601 AFC12 AFCW12 AFCP302 AFC22 AFCW22 AFFW502 AFFW602 AFC13 AFCW13 AFCP303 AFC23 AFCW2 AFFW503 AFFW603 AFC " 1' " 2' " 3'-4 3 4" 3'-9 5 8" " AFCW " " 1' " 2' " 3' " 3' " AFCP3035 AFC235 AFCW235 AFFW5035 AFFW6035 AFC14 AFCW14 AFCP304 AFC24 AFCW24 AFFW504 AFFW604 4' " 4' " 4'-9 5 8" 4' " 4' " 4' " 5'-0 5 8" 5'-2 1 4" 4'-4 1 4" 4' " 1' " 4' " 2' " 3'-6 3 8" 3' " " 1' " " " " 4' " 2' " 3'-7" 3' " 4' " 4' " 4' " 1' " 2' " 3'-7 3 4" 4'-0 5 8" 1' " 2' " 3'-9 3 8" 4'-2 1 4" AFC145 AFCW145 AFCP3045 AFC245 AFCW245 AFFW5045 AFFW6045 AFC15 AFCW15 AFCP305 AFC25 AFCW25 AFFW505 AFFW605 AFC155 AFCW155 AFCP3055 AFC255 AFCW255 AFFW5055 AFFW6055 AFC16 AFCW16 AFCP306 AFC26 AFCW26 AFFW506 AFFW606 8'-0 1 8" 8'-3 3 8" 8' " 8' " 8' " 8' " 8' " 8' " 5' " 6'-3 1 8" 6' " 6' " 6' " 6' " 6' " 6' " 5' " 1' " 1' " 1' " 1' " 5' " 5'-9 5 8" 5' " 5' " 5' " 6'-0 5 8" 6'-2 1 4" 4' " 5'-3 1 8" 5' " 5' " 5' " 5' " 5' " 5' " 130 AFC18 AFCW18 AFCP308 AFC28 AFCW28 AFFW508 AFFW608*

13 7' " 11'-9" 7' " 11'-9 1 2" " " 1'-6 5 8" 5' " 5'-0 5 8" 4' " 4' " 3'-0 3 4" 2'-0 5 8" " 8' 16' AFFW8006 AFFW801 AFFW802 AFFW803 AFFW8035 AFFW " 1' " 2' " 3' " AFFW12006 AFFW1201 AFFW1202 Divided light patterns shown on page 134. Custom-size windows are available in 1 8" increments. Archtop Window Glass Area Window Number Glass Area Sq. Ft. Overall Window Area Sq. Ft. AFC /4" 0.7 AFC11 1'-3 3 / 4" 1.6 AFC12 2'-3 7 /8" 3.4 AFC13 3'-3 3 / 4" 5.1 AFC135 3'-8 5 /8" 5.8 AFC14 4'-3 3 / 4" 6.8 AFC145 4'-8 5 /8" 7.5 AFC15 5'-3 5 / 8" 8.5 AFC155 5'-8 5 /8" 9.2 AFC16 6'-3 5 /8" 10.3 AFC18 8'-3 7 /8" 13.8 AFCW / 4" 1.1 AFCW11 1'-5 1 / 4" 2.1 AFCW12 2'-5 3 /8" 4.2 AFCW13 3'-5 1 /8" 6.3 AFCW135 3'-10" 7.1 AFCW14 4'-5 1 / 4" 8.4 AFCW145 4'-10" 9.2 Archtop Window Glass Area Window Number Glass Area Sq. Ft. Overall Window Area Sq. Ft. AFCW21 1'-7 5 /8" 5.1 AFCW22 2'-7 3 / 4" 9.5 AFCW23 3'-7 1 /2" 13.9 AFCW235 4'-0 3 / 8" 15.7 AFCW24 4'-7 5 /8" 18.3 AFCW245 5'-0 3 / 8" 20.1 AFCW25 5'-7 1 /2" 22.7 AFCW255 6'-0 3 / 8" 24.6 AFCW26 6'-7 1 /2" 27.2 AFCW28 8'-7 3 /4" 36.1 AFFW5006 1'-2 3 /8" 3.2 AFFW501 1'-8 3 / 8" 5.5 AFFW502 2'-8 1 / 2" 10.3 AFFW503 3'-8 1 /4" 14.8 AFFW5035 4'-1 1 /8" 16.7 AFFW504 4'-8 3 /8" 19.5 AFFW5045 5'-1 1 / 8" 21.4 AFFW505 5'-8 1 /4" Series Specialty Windows AFFW8045 AFCW15 5'-5 1 / 8" 10.4 AFCW155 5'-10" 11.3 AFFW5055 6'-1 1 / 8" 26.1 AFFW506 6'-8 1 /4" 28.8 AFCW16 6'-5 1 / 8" 12.5 AFFW508 8'-8 1 / 2" '-0 1 2" 6' " 6'-0 1 2" AFFW805 AFFW8055* AFCW18 8'-5 3 /8" 16.8 AFCP / 8" 1.4 AFCP301 1'-5 3 /8" 2.8 AFCP302 2'-5 1 / 2" 5.5 AFCP303 3'-5 1 / 4" 8.2 AFCP3035 3'-10 1 / 8" 9.3 AFCP304 4'-5 3 /8" 10.9 AFCP3045 4'-10 1 / 8" 12.0 AFCP305 5'-5 1 / 4" 13.6 AFCP3055 5'-10 1 / 8" 14.7 AFCP306 6'-5 1 / 4" 16.3 AFCP308 8'-5 1 / 2" 21.8 AFC206 1'-1" 2.2 AFC21 1'-7" 4.1 AFC22 2'-7 1 / 8" 7.8 AFFW6006 1'-4" 4.4 AFFW601 1'-10" 7.2 AFFW602 2'-10 1 /8" 12.9 AFFW603 3'-9 7 / 8" 18.5 AFFW6035 4'-2 3 / 4" 20.8 AFFW604 4'-10" 24.2 AFFW6045 5'-2 3 /4" 26.5 AFFW605 5'-9 7 / 8" 29.8 AFFW6055 6'-2 3 / 4" 32.1 AFFW606 6'-9 7 / 8" 35.5 AFFW608 8'-10 1 / 8" 46.9 AFFW8006 1'-7 1 / 8" 7.3 AFFW801 2'-1 1 /8" 11.1 AFFW802 3'-1 1 / 4" 18.8 AFFW803 4'-1 1 / 8" 26.4 AFC23 3'-6 7 / 8" 11.5 AFFW8035 4'-6" 29.5 AFFW806* AFC235 3'-11 3 / 4" 13.0 AFC24 4'-7" 15.2 AFFW804 5'-1 1 / 8" 34.1 AFFW8045 5'-6" 37.1 AFC245 4'-11 3 /4" 16.7 AFFW805 6'-1" 41.6 AFC25 5'-6 7 / 8" 18.9 AFFW8055 6'-6" 44.8 *Tempered glass standard. "Window Dimension" always refers to outside frame to frame dimension. " " dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on page 33. AFC255 5'-11 3 /4" 20.4 AFC26 6'-6 7 /8" 22.6 AFC28 8'-7 1 /8" 30.2 AFCW206 1'-1 5 /8" 2.8 AFFW806 7'-1" 49.3 AFFW '-8 1 /8" 9.9 AFFW1201 2'-2 1 /8" 15.6 AFFW1202 3'-2 1 /4"

14 SPECIALTY WINDOWS Table of Springline Sizes Window Width Dimension 3'-1 1 2" 5'-4 1 2" 5'-8 1 2" 5' " 6'-0" 3'-2" 4'-0 1 2" 5'-5" 5'-9" 5' " 6'-0 1 2" " " " " " " CUSTOM SIZES AVAILABLE Radius " 24" " " " 36" Window height shown in table Chord " 24" " " " 36" = window height + 1 2" = window height 4 3 4" CUSTOM SIZES AVAILABLE Shoulder 6" 12" 2'-0 1 8" 2' " 3' " 5'-6 3 4" 4' " 4' " 3'-6 7 8" 2'-6 3 4" 2'-0 3 4" SE3106 SE311 SE312 SE313 SE3135 6'-0" 5' " 4' " 4'-0 1 8" SP402 SP403 SP4035 SE5406 SE541 SE542 SE543 SE5435 SE5806 SE581 SE582 SE583 SE5835 ELFW6006 ELFW601 ELFW602 Notes on the next page also apply to this page. Additional heights on page 134. SE6006 SE601 SE602 SE603 SE6035 SE314 SP404 SE544 SE584 SE604 4' " 5' " SE3145 SP4045 SE5445 SE5845 SE6045 4' " 6'-5 3 4" 6'-11" 7'-7 1 4" 7'-9 1 4" 6'-8 1 4" 6' " 5' " 4'-8 3 8" 3'-8 1 4" 3'-2 1 4" 7'-11" 6'-4" 7'-0 1 4" 6' " 6' " 5' " 4' " 3' " 3'-4 1 4" 3' " 7'-2 1 4" 7'-4" 7'-0" 6' " 5' " 5'-0 1 8" 3'-6" 3' " 4' " 132 SE315 SP405 SE545 SE585 continued on next two pages SE605*

15 400 SERIES Springline Window Glass Area 7' " 7' " 8'-0" 8'-0 1 2" Window Number Glass Area Sq. Ft. Overall Window Area Sq. Ft. SE3106 2'-1 1 /4" 3.74 SE311 2'-7 1 / 4" " " SE312 3'-7 3 /8" 7.86 SE313 4'-7 1 /4" SE3135 5'-0 1 /8" " " 48" 48" Custom-size windows are available in 1 8" increments. Extension jambs are SE314 5'-7 1 / 4" SE3145 6'-0 1 /8" SE315 6'-7 1 /8" SE3155 7'-0 1 / 8" SE316 7'-7 1 /8" SE5406 3'-2 3 /4" SE541 3'-8 3 /4" Series Specialty Windows 3' " ELFW8006 4'-6" SP8006 available factory-applied when ordered at the same time as Springline SE542 4'-8 7 / 8" SE543 5'-8 3 /4" SE5435 6'-1 5 /8" SE544 6'-8 3 /4" ' " 4' " ELFW801 6'-0 1 8" 5'-0" SP801 windows. Divided light patterns shown on page 134. SE5445 7'-1 5 /8" SE545 7'-8 5 / 8" SE5455 8'-1 5 /8" SE546 8'-8 5 / 8" SE5806 3'-4 3 /4" SE581 3'-10 3 / 4" SE582 4'-10 7 /8" SE583 5'-10 3 / 4" SE5835 6'-3 5 /8" SE584 6'-10 3 /4" ELFW802 SP802 SE5845 7'-3 5 /8" SE585 7'-10 5 / 8" SE5855 8'-3 5 / 8" SE586 8'-10 5 /8" SE6006 3'-6 1 /2" SE601 4'-0 1 /2" SE602 5'-0 5 / 8" SE603 6'-0 1 /2" SE6035 6'-5 3 / 8" SE604 7'-0 1 /2" SE6045 7'-5 3 / 8" SE605 8'-0 3 /8" SE6055 8'-5 3 / 8" SE606 9'-0 3 /8" SP402 4'-0 5 / 8" SP403 5'-0 1 / 2" SP4035 5'-5 3 / 8" SP404 6'-0 1 /2" SP4045 6'-5 3 / 8" SP405 7'-0 3 / 8" SP4055 7'-5 3 / 8" SP406 8'-0 3 / 8" SP8006 4'-6 1 / 2" SP801 5'-0 1 / 2" SP802 6'-0 5 /8" ELFW6006 3'-1 3 / 8" ELFW601 3'-7 3 / 8" ELFW602 4'-7 1 /2" ELFW8006 4'-0 1 / 8" ELFW801 4'-6 1 /8" ELFW802 5'-6 1 / 4" "Window Dimension" always refers to outside frame to frame dimension. " " dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on page

16 SPECIALTY WINDOWS Table of Springline Window Sizes (continued) Window Width Dimension 3'-1 1 2" 5'-4 1 2" 5'-8 1 2" 6'-0" 3'-2" 4'-0 1 2" 5'-5" 5'-9" 6'-0 1 2" " " " " " CUSTOM SIZES AVAILABLE Radius " 24" " " 36" Window height shown in table Chord " 24" " " 36" = window height + 1 2" = window height 4 3 4" CUSTOM SIZES AVAILABLE Shoulder 5' " 5' " 6' " 7'-5 3 4" SE3155 7'-4" 7'-11" SP4055 8'-0 1 4" 8'-7 1 4" SE5455 8'-2 1 4" 8'-9 1 4" SE5855* Table is continued from page 132. Custom-size windows are available in 1 8" 8'-11" 8'-4" SE6055* SE316 SP406 SE546* SE586* increments. SE606* *Tempered glass standard. "Window Dimension" always refers to outside frame to frame dimension. " " dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on page 33. Extension jambs are available factory-applied when ordered at the same time as Springline windows. Divided light patterns shown below. Divided Light Patterns Colonial Renaissance Sunburst Number of lights and overall pattern varies with window size. Patterns are not available in all configurations. Archtop Specified equal light and custom patterns are also available. For more information on divided light see page 13 or visit andersenwindows.com/grilles. Springline Springline Flanker Custom Pattern Examples 134

17 Table of Springline Flanker Window Sizes Window Dimension 1'-5" 1'-5" 1'-8 1 2" 1'-8 1 2" 2'-0 1 8" 2'-0 1 8" 2'-4 3 8" 2'-4 3 8" 2' " 2' " 1'-5 1 2" 1'-5 1 2" 1'-9" 1'-9" 2'-0 5 8" 2'-0 5 8" 2'-4 7 8" 2'-4 7 8" 3' " 2' " 4'-0 1 2" 3'-5 3 8" " " " " " " " " " " " " " CR CN C CW CXW Radius " 24" " " 36" C4 C35 C3 Shoulder " 24" " " 36" " " " " " 9 5 8" " " " 16" 12" To order Springline flanker windows contact your supplier. Custom window dimensions shown in table are compatible with standard casement window widths (CR, CN, C, CW, CXW) and heights (C3, C4, C5, C6). Divided light patterns shown on page 134. Examples: C5 SFL CR6 CR12 SP406 A41 SFR CR6 CR12 5' " 6'-0 3 8" " C " 400 Series Specialty Windows 4' " 5'-0 3 8" " " " " " " " " " " "Window Dimension" always refers to outside frame to frame dimension. " " dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on page 33. CR13 CR13 SFL SFR CXW6 CXW6 AXW31 AXW31 CR13 CR13 Archtop Window Details Springline Window Details Unit Dimension Width Width Horizontal Section Flexible Drip Cap by Others Unit Dimension Arch Casing and Extension s Unit Dimension Width Min. Width Horizontal Section Light-colored areas are parts included with window. Dark-colored areas are additional parts required to complete window assembly as shown. Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on page 33. Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. Flexible Drip Cap by Others Min. Unit Dimension 135

18 SPECIALTY WINDOWS Flexiframe Window Shapes and Sizes and Maximum Limits Flexiframe windows Maximum standard glass area of 60 sq. ft. may be assembled in Square footage is based on a square or rectangular shape No angle may be less than 14 almost any shape or size No leg may be less than 6" or greater than 144" with these limitations: No short leg may be greater than 84" See product information below for additional limitations based on specific shapes Triangle Parallelogram Rectangle Pentagon Leg Width Min. Width Width Right Triangles contain one 90 corner. Specify length of both legs extending from the 90 corner. Pitch Horizontal/Vertical Parallelograms contain two pairs of parallel sides. Specify length of vertical and horizontal legs and pitch. Unit Width Leg Length Width Width Max. Max. Width Min. Angled Pentagon contain an angle cut, or a "cut-off corner" sloping to left or right. Specify width at head, width at sill, height on short side and height on long side. Isosceles Trigangles contain two sides of equal length and equal angle. Specify length of leg at sill & window height (sill to peak). Hexagon Equal Leg Width to Peak Equilateral Hexagons contain six equal angles and sides. Specify length of one leg. Diamonds contain two pairs of parallel and equal length sides. Specify by window width and window height. Octagon Equal Leg Unit Equilateral Octagons contain eight equal angles and sides. Specify length of one leg. Standard octagons sizes are available in 2', 2'-4" and 3', see page 125. Rectangles contain four equal angles and either two or four equal sides. Include both squares and rectangles. Specify window width and height. Trapezoid Max. Max. Width Min. Side Min. Width to Peak Peaked Pentagon contain sides of equal length, extending at right angles from the sill, and two angled sides, of equal length, that peak above center of sill. Specify window width at sill, height of one vertical leg, and window height from sill to peak. Vertical Leg Unit Unequal Hexagons contain three pairs of angles and two sets of equal length legs. Unequal leg at head of unit is parallel to and is centered over unequal leg at sill. Specify length of leg at sill and head, one vertical leg and window height. Width Sloped to Left or Sloped to Right contain angle face cut to left or right. Specify window width at sill, window height, and length of short side. Slope is often designed to match a roof's slope. 136

19 Flexiframe Window Detail Glazing Sealant Glass Stop Combination Examples 1 3 8" (35) " (33) 2 7 8" (73) Horizontal Section 1 3 8" Trim Stop (included in factory set up) 2" Trim Stop Also Available Extension Installation Flange 400 Series Specialty Windows Extension Alignment Method A is used when picture frame trimming is desired in the following applications: archtop or Flexiframe over casement windows, awning over, under, or next to casement windows, or awning next to archtop and Flexiframe windows. Method B is used for all other conditions such as when a continuous uninterrupted extension jamb is desired or when no extension jambs are used (i.e. only joining trim is used). Casement Auxiliary Extension Available in 4' and 6' Lengths, ", 5 1 4", ", or 7 1 8" Widths Casement Filler Strip (by others) Modified Extension Aligned Without Tongue for Groove Vertical (ribbon) Non-Reinforced Joining Detail Overall Window Dimension Width Sum of individual window widths plus 3 16" for each join. Overall Width Overall window dimension width plus 1 2". Wood Casing Wood Joining Strip Trim Strip Set in Continuous Bead of Sealant Each Side Horizontal joining on next page " (35) 1 3 8" (35) 3 16" (5) Section Flexiframe over Flexiframe For more joining information see the combination design section starting on page 259. Flexiframe Method A Flexiframe Method B Light-colored areas are parts included with window. Dark-colored areas are additional parts required to complete window assembly as shown. Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on page 33. Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. Consult with an architect or structural engineer regarding minimum requirements for structural support members between adjacent rough openings. 137

20 SPECIALTY WINDOWS Horizonal (stack) Non-Reinforced Joining Details Flexiframe over Flexiframe Window Overall Window Dimension Sum of individual window heights plus 3 16" for each join. Overall Overall window dimension height plus 1 2". Flexiframe over Casement Window Overall Window Dimension Sum of individual window heights plus 3 16" for each join. Overall Overall window dimension height plus 1 2". 3 16" (5) Wood Casing Wood Joining Strip Trim Strip Set in Continuous Bead of Sealant Each Side 1 3 8" (35) 3 16" (5) 1 3 8" (35) Wood Casing by Others Wood Joining Strip Trim Strip Set in Continuous Bead of Sealant Each Side Flexiframe over Tilt-Wash Double-Hung Window Overall Window Dimension Sum of individual window heights plus 1 8" for each join. Overall Overall window dimension height plus 1 2". Flexiframe over Narroline Double-Hung WIndow Overall Window Dimension Sum of individual window heights plus 1 2" for each join. Overall Overall window dimension height plus 1 2" " Wood Casing Extension 1 8" (3) Trim Strip Set in Continuous Bead of Sealant Each Side Unit Dim. Unit Dim. 0" 2 3 8" Wood Casing Extension Aluminum Trim Piece Unit Dim. Unit Dim. 1 2" (13) 0" Vertical joining on previous page. For more joining information see the combination design section starting on page 259. Separate Detail To meet structural requirements or to achieve a wider joined appearance, windows may be installed into separate rough openings having vertical support (by others) in combination with exterior filler and exterior vinyl trim. Light-colored areas are parts included with window. Dark-colored areas are additional parts required to complete window assembly as shown. Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on page 33. Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindow.com. Consult with an architect or structural engineer regarding minimum requirements for structural support members between adjacent rough openings. Glazing Sealant 1 3 8" (26) Nailing Flange Adequate ers Glass Stop 1 3 8" Sash Stop (included in factory set up) 2" Sash Stop Also Available Extension Wood Casing by Others Extension s Structure and Anchorage by Others Wood Filler " (97) Trim Flexiframe and Perma-Shield Gliding 1 3 8" (35) 2" (51) 1 3 8" (35) Horizontal Section Flexiframe and Awning Strip Set in Continuous Bead of Sealant each Side 138