Promotion.

Transcription

1 Promotion 013 WORK EFFICIENT WORK WITH SONIC

2 17 PCS art. no drawers drawers filled with 17-pcs tools 06 PCS art. no drawers 3 drawers filled with 06-pcs tools 5 PCS art. no. 706 Drawer release system integrated within the handle, against tipping over Drawer release system integrated within the handle, against tipping over drawers drawers filled with 5-pcs tools 7 drawers with ball bearing slides foam mat can holder front centralized safety lock fully (100%) retractable drawers powder coating exterior rubber casters, x swivel caster with brake + x fixed 7 mm 1050 mm 575 mm 3

3 7 PCS art. no art. no. 790 art. no mm 1037 mm 5 mm 6 drawers filled with 7-pcs tools PCS art. no art. no art. no art. no mm 1050 mm 575 mm 7 drawers filled with 391-pcs tools DRAWERS : 7 shallow DRAWERS 1 DEEP DRAWER drawer BLOCKING SYSTEM, AS PROTECTION AGAINST TIPPING OVER drawer RELEASE SYSTEM, NO MECHANISM IN THE HANDLE fully 100% RECTRACTABLE DRAWERS auto return ball bearing slides powder CoaTING EXTERIOR front CENTRaLiZED SAFETY LOCK folding KEY abs TOPBLADE integrated CAN HOLDERS integrated PAPER ROLL HOLDER integrated GARBAGE BIN rubber CASTERS (Ø 15MM-50MM) X swivel CASTERS WITH BRAKE AND FIXED overall WeiGHT 91KG static LOAD CAPACITY: 00KG drawer CAPACITY: 0KG measurements: L 30 x H 1050 X B 55mm Set 6010 contains reversible gear wrenches 77 PCS art. no art. no art. no drawers filled with 77-pcs tools Also available in S10 trolley, see our website mm 1037 mm 5 mm Set contains reversible gear wrenches 5

4 10 PCS art. no art. no art. no art. no drawers filled with 10-pcs tools 95 PCS art. no art. no art. no art. no drawers filled with 95-pcs tools 3 PCS art. no art. no art. no art. no drawers filled with 3-pcs tools 7 PCS art. no art. no art. no art. no drawers filled with 7-pcs tools mm 1050 mm 575 mm PCS art. no art. no art. no art. no drawers filled with 60-pcs tools heavy duty Tool trolley Tool trolley Tool trolley specially assembled specially specially for Volkswagen assembled assembled for and Audi for BMW Mercedes Benz

5 35 PCS art. no Drawers 6 drawers filled with 35-pcs tools Also available in S11 trolley, see our website PCS art. no drawers filled with 5-pcs tools art. no integrated GARBAGE BIN art. no. 751 drawers: rubber CASTERS (Ø 15MM-50MM) art. no shallow DRAWERs X swivel CASTERS WITH BRAKE AND DEEP DRAWER FIXED drawer BLOCKING SYSTEM, AS overall WeiGHT 107KG PROTECTION AGAINST TIPPING OVER static LOAD CAPACITY: 00KG fully 100% RECTRACTABLE DRAWERS drawer CAPACITY: 0KG auto return ball bearing slides measurement powder CoaTING EXTERIOR L 1050 x h 1050 x w 635mm front CENTRaLiZED SAFETY LOCK incl. 1x 3/ torque wrench & folding KEY 1x 1/ torque wrench abs TOPBLADE incl. reversible gear wrenches integrated CAN HOLDERS integrated PAPER ROLL HOLDER 1050 mm 1050 mm 635 mm art. no Also available in Jumbo trolley 533 PCS art. no mm 100 mm 510 mm 9 Drawers drawers filled with 533-pcs tools Also available in S11 trolley, see our website mm 1095 mm 510 mm 9

6 575 PCS art. no art. no art. no art. no drawers filled with 575-pcs tools 6 PCS art. no art. no art. no. 761 art. no. 760 drawers filled with 6-pcs tools mm 1050 mm 635 mm drawers: 7 shallow DRAWERs 1 DEEP DRAWER drawer BLOCKING SYSTEM, AS PROTECTION AGAINST TIPPING OVER fully 100% RECTRACTABLE DRAWERS auto return ball bearing slides powder CoaTING EXTERIOR front CENTRaLiZED SAFETY LOCK folding KEY abs TOPBLADE integrated CAN HOLDERS integrated PAPER ROLL HOLDER integrated GARBAGE BIN rubber CASTERS (Ø 15MM-50MM) X swivel CASTERS WITH BRAKE AND FIXED overall WeiGHT 107KG static LOAD CAPACITY: 00KG drawer CAPACITY: 0KG measurement L 1050 x h 1050 x w 635mm incl. 1x 3/ torque wrench & 1x 1/ torque wrench incl. reversible gear wrenches 1050 mm 1050 mm 635 mm

7 90 PCS art. no drawers 5 drawers filled with 90-pcs tools PCS art. no Drawers 6 drawers filled with 616-pcs tools 1 3 WORK Trolley PCS art. no drawers 11 drawers filled with 50-pcs tools WORK Trolley heavy duty Mega trolley 150% more space PCS art. no Drawers drawers filled with 6-pcs tools mm 111 mm 61 mm 1 Mega trolley 150% more space 13

8 96 PCS art. no drawers filled topbox art. no art. no art. no art. no drawers with ball bearing slides front centralized safety lock fully (100%) retractable drawers powder coating exterior weight: 10KG (empty) Empty weight: 10,9kg filled weight: 19,kg 531 mm 6 mm 0 mm mm Traditional topbox drawers 60 mm 50 mm 100 mm 100 mm 100 mm 60 PCS art. no PCS art. no Filled suitcase measurements: 60 X 160 X 310 MM weight: KG (EMPTY ) material: ABS-HARD SHELL CASE LOCKS tool PANEL,WITH INSERT SYSTEM bottom TRAY WITH ADJUSTABLE COMPARTMENTS height 59mm flexible HANDLE, STURDLY AGAINST HEAT, COLDNESS AND MECHANICAL LOAD 3 drawers filled topbox Suitcase empty art. no art. no mm Jumbo topbox 3 Drawers art. no art. no art. no mm 9 mm 60 mm Service cart 3 drawers black 3 drawers with ball bearing slides front centralized safety lock powder coating exterior rubber casters x swivel (with brake) + x fixed dimensions 60 x 500 x 100 (lxwxh) 500 mm 60 mm 500 mm Service cart black powder coating exterior rubber casters x swivel (with brake) + x fixed dimensions 60 x 500 x 100 (lxwxh) art. no mm Trolley 7 drawers 7 drawers with ball bearing slides foam mat can holder front centralized safety lock fully (100%) retractable drawers powder coating exterior rubber casters, x swivel caster with brake + x fixed art. no mm drawers with ball bearing slides front centralized safety lock fully (100%) retractable drawers powder coating exterior height drawers 60mm weight 3 kg 100 mm 100 mm 1095 mm 5 PCS art. no. 751 drawers filled topbox mm 5 mm 953 mm 510 mm 953 mm 510 mm 1 Traditional trolley drawers with ABS -topblade, can holder, paper roll holder Jumbo trolley drawers Jumbo trolley 9 drawers 15

9 art. no art. no art. no art. no art. no art. no art. no art. no art. no art. no mm ppu casters, x fixed, x swivel with brake (ø 155mm - 50mm) HEAVY DUTY HANDLE 16 Trolley drawers drawers 7 shallow DRAWERS 1 DEEP DRAWER drawer BLOCKING SYSTEM, AS PROTECTION AGAINST TIPPING OVER drawer RELeaSE SYSTEM, NO MECHANISM IN THE HANDLE fully 100% RECTRACTABLE DRAWERS auto return ball bearing slides powder CoaTING EXTERIOR front CENTRaLiZED SAFETY LOCK folding KEY abs TOPBLADE integrated CAN HOLDERS integrated PAPER ROLL HOLDER integrated GARBAGE BIN rubber CASTERS (Ø 15MM-50MM) X swivel CASTERS WITH BRAKE AND FIXED overall WeiGHT 91 KG static LOAD CAPACITY: 00KG drawer CAPACITY: 0KG dimensions: l 30 x h 1050 x w 55mm Trolley drawers DRAWERS 7 shallow DRAWERS 1 DEEP DRAWER DRAWER BLOCKING SYSTEM, AS PROTECTION AGAINST TIPPING OVER DRAWER RELeaSE SYSTEM, NO MECHANISM IN THE HANDLE FULLY 100% RECTRACTABLE DRAWERS auto return ball bearing slides POWDER CoaTING EXTERIOR FRONT CENTRaLiZED SAFETY LOCK FOLDING KEY ABS TOPBLADE INTEGRATED CAN HOLDERS INTEGRATED PAPER ROLL HOLDER INTEGRATED GARBAGE BIN RUBBER CASTERS (Ø 15MM -50MM ) X swivel CASTERS WITH BRAKE AND FIXED OVERALL WeiGHT 107 KG STATIC LOAD CAPACITY: 00KG DRAWER CAPACITY: 0KG Dimensions: l 1050 x h 1050 x w 635mm Trolley 13 drawers 13 DRAWERS 9 Shallow DRAWERS DEEP DRAWERs SMALL DRAWERs WOODEN TOPBLADE DOCUMENT HOLDER DRAWER BLOCKING SYSTEM, AS PROTECTION AGAINST TIPPING OVER FULLY 100% RECTRACTABLE DRAWERS POWDER CoaTING EXTERIOR FRONT CENTRaLiZED SAFETY LOCK CAN HOLDERS PAPER HOLDER GARBAGE BIN RUBBER CASTERS (Ø 15MM-50MM) X swivel CASTERS WITH BRAKE AND FIXED OVERALL WEIGHT 155KG STATIC LOAD CAPACITY: 00KG DRAWER CAPACITY: 0KG Dimensions: l 115 x h 951 x w 730mm WORK Trolley Trolley 1 drawers 1 DRAWERS 16 Shallow DRAWERs DEEP DRAWERs DRAWER BLOCKING SYSTEM, AS PROTECTION AGAINST TIPPING OVER DRAWER RELeaSE SYSTEM, NO MECHANISM IN THE HANDLE FULLY 100% RETRACTABLE DRAWERS POWDER CoaTING EXTERIOR FRONT CENTRaLiZED SAFETY LOCK FOLDING KEY WOODEN TOPBLADE X CAN HOLDER PAPER ROLL HOLDER AUTO RETURN BALL BEARING SLIDES CASTERS (Ø 155MM- 50MM) X swivel CASTERS WITH BRAKE AND FIXED OVERALL WeiGHT 1KG STATIC LOAD CAPACITY 600KG DRAWER CAPACITY 0KG Dimensions: l 1363 x h 111 x w 61mm 17

10 art. no Improve your image, Productivity & Efficiency art. no art. no mm 100mm 500mm art. no art. no mm 000mm art. no art. no mm 000mm art. no art. no mm 000mm art. no art. no mm 000mm art. no art. no mm 000mm art. no art. no mm 000mm art. no art. no mm 000mm 6 Flexible/adjustable shelves. 1 fixed shelf Heavy duty ball bearing slides Steel panel for tool storage Stainless steel work surface 100% Retractable drawers Front centralized locks Cupboard with gas spring x USB connectors x LAN connectors. x AIR connectors Compatible for TTS/SFS Electric connectors 0-30 V with power switch x Drawers with capacity 0KG Self supporting structure. Walls no longer needed Master work station, the balanced storage and workspace, to maximize your work flow and productivity 1 art. no left art. no right Drawers inside dimension left or right total drawers, left and right 1 full deep drawer l 1390 x d 57 x h 10 x drawer L579 x D57 x H67 1x drawer L750 x D57 x H67 x drawer L579 x D57 x H16 3x drawer L750 x D57 x H16 Compatible for: 6536mm 100mm 70mm art. no art. no mm 100mm 500mm art. no art. no mm 100mm 500mm art. no art. no mm 100mm 500mm art. no art. no mm 100mm 500mm 19

11 Compatible for: MSS is a self-supporting system design, installing against wall is not necessary, it can be placed anywhere. MSS is a self-supporting system design, installing against wall is not necessary, it can be placed anywhere. Compatible for: For MORE INFORMATION ABOUT THE SETUPS see our website For MORE INFORMATION ABOUT THE SETUPS see our website art. no art. no mm 000mm art. no art. no mm 000mm art. no art. no art. no art. no The new ultimate sonic work space 1690mm 000mm 1690mm 000mm art. no art. no mm 000mm art. no art. no mm 000mm art. no art. no mm 000mm art. no art. no Get organized be efficient 13mm 000mm 0 art. no art. no mm 000mm art. no art. no mm 100mm 500mm art. no art. no mm 100mm 500mm art. no art. no mm 100mm 500mm art. no art. no mm 000mm art. no art. no mm 100mm 500mm art. no art. no mm 100mm 500mm art. no art. no mm 100mm 500mm 1

12 Measurements: 67 x 100 x 500 mm Drawers inside dimensions: l575 x d370 Measurements: 5 x 100 x 500 mm Drawers inside dimensions: l70 x d35 Measurements: 67 x 100 x 500 mm Measurements: 5 x 100 x 500 mm Build your own unique tool kit T h r e e d i f f e r e n t e x a m p l e s t o f i l l y o u r M W S / M S S art. no cabinet without top blade art. no cabinet wooden top blade art. no cabinet stainless steel top blade art. no cabinet without top blade art. no cabinet wooden top blade art. no cabinet stainless steel top blade art. no. 7 6 closet without top blade art. no closet wooden top blade art. no closet stainless steel top blade art. no closet without top blade art. no closet wooden top blade art. no closet stainless steel top blade art. no. 700 vulling Filling 5-pcs PCS. for voor drawers 6 (l575 (575 x D370) Measurements: 67 x 100 x 500 mm Drawers inside dimensions: l575 x d370 art. no cabinet with door without top blade art. no cabinet with door wooden top Blade art. no cabinet with door stainless steel top blade art. no. 737 Dimension: L67 x d500 x h0 art. no. 73 Dimension: L5 x d500 x h0 art. no. 779 Dimension: L13 x d500 x h0 art. no. 795 Dimension: L1690 x d500 x h0 art. no Dimension: L193 x d500 x h0 Measurements: 5 x 100 x 500 mm Drawers inside dimensions: l70 x d35 art. no cabinet with door without top blade art. no cabinet with door wooden top Blade art. no cabinet with door stainless steel top blade art. no Dimension: L67 x d500 x h0 art. no. 731 Dimension: L5 x d500 x h0 art. no. 733 Dimension: L13 x d500 x h0 art. no. 73 Dimension: L1690 x d500 x h0 art. no. 735 Dimension: L193 x d500 x h0 Measurements: 67 x 000 x 530 mm Drawers inside dimensions: l575 x d370 art. no cabinet with hanger board wooden top blade art. no cabinet with hanger board stainless steel top blade art. no. 77 Measurements: 610 x 000 x 530 mm Measurements: 5 x 000 x 530 mm Drawers inside dimensions: l70 x d35 art. no cabinet with hanger board wooden top blade art. no cabinet with hanger board stainless steel top blade art. no art. no Filling 35-pcs for drawers 3 (70 x 35) Filling 6-pcs for drawers 6 (70 x 35) art. no full high hanger board art. no full high hanger board Cupboard art. no L67 x d300 x h00 art. no L5 x d300 x h00 Hooks art. no mml art. no mml art. no. 77 Side locker with 5 adjustable shelves art. no. 73 wire pipe L60 x D30 x H000 art. no. 7 wire pipe L30 x D30 x H000 Improve your image Productivity & Efficiency

13 art. no SONIC 169 PCS art. no art. no pcs Hex ball extra long key 9pcs 1/ Socket set (SAE) pcs 3/ Socket set (SAE) 1/16, 5/6, 3/3, 1/, 5/3, 3/16, 7/3, 1/, 5/16, 3/ 3/16, 7/3, 1/, 9/3, 5/16, 11/3, 3/, 7/16, 1/ 3/, 7/16, 1/, 9/16, 5/, 11/16, 3/, 13/16 art. no pcs Double open wrench set (SAE) 1/ x 5/16, 3/ x 7/16, 1/ x 9/16, 9/16 x 5/, 11/16 x 3/, 13/16 x 7/, 15/16 x 1, 1.1/ x 1.1/ art. no art. no pcs 1/ Deep socket set (SAE) pcs 3/ Deep socket set (SAE) 3/16, 7/3, 1/, 9/3, 5/16, 11/3, 3/, 7/16, 1/ 3/, 7/16, 1/, 9/16, 5/, 11/16, 3/, 13/16 art. no art. no pcs 1/ Socket set (SAE) 3/, 7/16, 1/, 9/16, 5/, 11/16, 3/, 13/16, 7/, 15/16, 1, 1.1/16, 1.1/, 1.3/16, 1.1/ art. no drawers filled with 169-pcs tools 3/, 7/16, 1/, 9/16, 5/, 11/16, 3/, 13/16, 7/, 15/16, 1, 1.1/16, 1.1/, 1.3/16, 1.1/ drawers with ball bearing slides drawer blocking system, as protection against tipping over abs topblade can holder front centralized safety lock fully (100%) retractable drawers powder coating exterior rubber casters, x caster with brake + x fixed drawers + 3 sae set art. no mm 355 PCS art. no art. no SONIC 15pcs 1/ Deep socket set (SAE) 1 SAE tools m 5m 6 drawers filled with 35-pcs tools pcs Combination wrench set (SAE) art. no pcs Flare nut wrench set (SAE) 1/ x 5/16, 3/ x 7/16, 1/ x 9/16, 5/ x 11/16 7pcs 1/ Hex socket bit set (SAE) 9pcs 3/ Hex socket bit set (SAE) 10pcs 1/ Hex socket bit set (SAE) 1/, 5/16, 3/, 7/16, 1/, 9/16, 5/, 11/16, 3/, 13/16, 7/, 15/16 1/, 5/3, 3/16, 7/3, 1/, 5/16, 3/ 1/, 5/3, 3/16, 7/3, 1/, 5/16, 3/, 7/16, 1/ 3/16, 1/, 9/3, 5/16, 11/3, 3/, 7/16, 1/, 9/16, 5/ art. no art. no art. no art. no SFS 93pcs 1 pt. 1/ & 3/ & 1/ set (SAE) SFS 100pcs 1 pt. 1/ & 3/ & 1/ set (SAE ) 7pcs 5 Offset ring wrench set (SAE) 1/ x 5/16, 3/ x 7/16, 1/ x 9/16, 9/16 x 5/, 11/16 x 3/, 13/16 x 7/, 15/16 x mm art. no SFS 31pcs Wrench set (SAE) 13 mm m 5m w ww ww w..ssoonni icc- -etqouoi lp sm. e cn o tm..ctowm w ww ww w..ssoonni icc- -etqouoi lp sm. e cn o tm..ctowm art. no art. no art. no art. no mm SAE tools art. no

14 art. no art. no art. no art. no pcs 1/ Socket set Metal box system 1/" 6pt. Flank socket 10,11,1,13,1,15,16,17,1,19,0, 1,,3,,7,30,3 1/" Ratchet handle- 5 teeth 1/" Extension 15mmL,50mmL 1/" Universal joint Adaptor for ext. 3/"(F)x1/"(M) 1/" Swivel handle 30mmL 17pcs 1/ Star socket & bit set 10, 11, 1, 1, 16, 1, 0,, T5, T7, T30, T0, T5, T50, T55, T60 1/ art. no. 001 art. no pcs 3/ Socket Set 19pcs 1/ Socket set 3/ 6pt Flank socket 6,7,,9,10,11,1,13,1,15,16,17,1, 19,0,1, 3/ Ratchet handle-5 teeth 3/ Extension mml, 75mmL, 150mmL, 50mmL 3/ Universal joint Adaptor for ext. 1/ (F)x3/ (M) - 3/ Spark plug socket 16,1,1mm 1/ 6pt. Flank socket 10,11,1,13,1,15,16,17,1,19,1,,3, 1/ Ratchet handle-5 teeth 1/ Sliding T handle 50mmL 1/ Extension 15mmL, 50mmL 1/ Universal joint 6, 7,, 9, 10, 1, 1, 17mm art. no / art. no. 735 art. no / 35pcs 1/ Socket & bit set 3/ 7pcs 1/ combination set 1/ 6pt. Flank deep socket,.5,5,5.5,6,7,,9, 10,11,1,13 1/ Star socket E,E5,E6,E7,E,E10 1/ Star deep socket E,E5,E6,E7,E,E10 1/ Phillips socket bit PH.1, PH., PH.3 1/ Pozidriv socket bit PZ.1,PZ.,PZ.3 1/ Slotted socket bit,5.5,6.5 1/ Hex socket bit 3,,5,6,7, 1/ Star socket bit T,T10,T15,T0,T5,T7,T30,T0 1/ StarT.socketbitTH,T10H,T15H,T0H,T5H,T7H, T30H,T0H 1/ Ratchet handle-5 teeth 1/ Sliding T handle 1/ Extension 50mmL, 100mmL 1/ Universal joint 1/ Spinner 150mmL-6 1/ Magnetic socket pick-up art. no pcs 1/ ball hex long socket bit set,.5, 5, 5.5, 6, 7,, 9, 10, 11, 1, 13 PH.0, PH.1, PH., PH.3 Slotted socket bit, 5.5, 6.5 Star socket bit 3,, 5, 6 T10, T15, T0, T5, T7, T30, T0 art. no , 5.5, 6, 7,, 9, 10, 1mm art. no art. no pcs 1/ star tamper socket bit set T7H, T30H, T0H, T5H, T50H, 1/ pcs 1/ Spline socket bit set T55H, T60H, T70H M5, M6, M, M9, M10, M1, M16 art. no art. no / pcs 1/ Hex long socket bit set 6, 7,, 9, 10, 1, 1, 17mm 1/ METAL CASE M EMPTY 15 x 15 x 5mm art. no. 73 art. no pcs 1/ &1/ Socket set 0pcs 3/ Combination set 1/ 1/ art. no / 6pt Flank socket 6,7,,9,10,11,1,13,1,15,16,17,1, 19,0,1, 3/ Hex socket bit,5,6, 7, 3/ Star socket bit T0,T5,T7,T30,T0,T5,T50 3/ Spline socket bit M5,M6,M,M10,M1 3/ Ratchet handle-5 teeth 3/ Extension mml, 75mmL, 150mmL 3/ Universal joint Adaptor for ext. 1/ (F)x3/ (M) 3/ 1/ 6pt. Flank socket,.5,5,5.5,6,7,,9,10,11,1,13 1/ Phillips socket bit PH.1, PH., PH.3 1/ Pozidriv socket bit PZ.1, PZ., PZ.3 1/ Slotted socket bit, 5.5,6.5 1/ Hex socket bit 3,,5,6,7,,10 1/ Star socket bit T,T10,T15,T0,T5,T7,T30,T0 1/ Star T. socket bit TH,T10H,T15H,T0H,T5H,T7H,T30H,T0H 1/ Ratchet handle-5 teeth 1/ Sliding T handle 1/ Extension 50mmL,100mmL,150mmL 1/ Universal joint, 1/ Spinner 150mmL-6 1/ 6pt. Flank socket,9,10,11,1,13,1,15,16,17,1,19,0,1,,3,,7,30,3 1/ Ratchet handle 5 teeth 1/ Extension 15mmL, 50mmL 1/ Universal joint, Adaptor for ext. 3/ (F)x1/ (M) art. no art. no pcs 3/ Socket wrench set 3pcs 1/ Socket set 3/ 6pt Flank socket 6,7,,9,10,11,1,13,1,15,16,17,1, 19,0,1, Combination wrench 6,7,, 9,10,11,1,13, 1,15,16,17,1,19 3/ Ratchet handle-5 teeth 3/ Extension mml, 75mmL, 150mmL 3/ Universal joint Adaptor for ext. 1/ (F)x3/ (M) 1/ 6pt. Flank socket,9,10,11,1,13,1,15,16,17,1,19, 0,1,,3,,7,30,3 1/ Star Socket E10,E11,E1,E1, E16,E1,E0,E,E 1/ Ratchet handle-5 teeth 1/ Sliding T handle 50mmL 1/ Extension 15mmL, 50mmL 1/ Universal joint 1/ Spark plug socket 16, 1, 1 1/ Swivel handle 30mmL 15 1/ 1/ pcs 1/ Star socket bit set T7, T30, T0, T5, T50, T55, T60, T70 1/ art. no / 3/ 6 pcs 1/ Hex socket bit set pcs 1/ Star long socket bit set T7, T30, T0, T5, T50, T55, T60, T70 1/ pcs 1/ star long tamper socket bit set 1/ T7H, T30H, T0H, T5H, T50H, T55H, T60H, T70H pcs 1/ Spline long socket bit set M5, M6, M, M9, M10, M1, M1, M16 1/ 1/ pcs 1/ Ribe socket bit set M6, M, M9, M10, M1, M1, M16 1/ METAL CASE M EMPTY 370 x 15 x 5mm art. no art. no. 733 pcs 1/ Ribe long socket bit set 1/ METAL CASE M EMPTY M6, M, M9, M10, M1, M1, M16 w w w. s o n i c - e q u i p m e n t. c o m w w w. s o n i c - e q u i p m e n t. c o m art. no / 370 x 90 x 73mm 7

15 art. no pcs 1/ 6pt. Flank socket set art. no. 1010,.5, 5, 5.5, 6, 7,, 9, 10, 11, 1, 13mm w w w. s o n i c - e q u i p m e n t. c o m 1/ Star Cardan socket E, E5, E6, E7, E 3/ Star cardan socket E10, E1, E1, E16 art. no art. no T10, T15, T0, T5, T7, T30, T0, 9, 10, 11, 1, 13, 1, 15, 16, 17mm IPR, 10IPR, 15IPR, 0IPR, 5iPR, 7IPR, art. no art. no pcs 1/ Spline socket bit set 3 10pcs 3/ 1pt. Flank socket set / E5, E6, E7, E, E10 short E5, E6, E7, E, E10 deep art. no art. no pcs 1/ Ball hex socket bit set T, T10, T15, T0, T5 TH, T10H, T15H, T0H, T5H art. no art. no pcs 1/ Ribe socket bit set art. no pcs 3/ 1pt. Flank deep socket set 10pcs 3/ Star socket set, 10, 11, 1, 13, 1, 15, 16, 17, 19mm 10pcs 1/ Star socket bit set 3,, 5, 5.5, 6, 7,, 9, 10mm art. no pcs 1/ Star socket set,.5, 5, 5.5, 6, 7,, 9, 10, 11, 1, 13mm M, M5, M6, M7, M, M10 M, M5, M6, M, M10, 10, 11, 1, 13, 1, 15, 16, 17, 19mm 9pcs 1/ Hex socket bit set 3,, 5, 5.5, 6, 7,, 9, 10mm art. no pcs 1/ 1pt. Flank deep socket set 30IPR, 0IPR, 5IPR, 50IPR art. no pcs 3/ 6pt. Flank deep socket set 10pcs 1/ Tamper-Resistant TX plus socket bit set art. no E10, E11, E1, E1, E16 short E10, E11, E1, E1, E16 long 10pcs 3/ 6pt. Flank socket set art. no / 10, 11, 1, 13, 1, 15, 16, 17, 1, 19 10pcs 3/ Star tamper socket bit set 10pcs 3/ Star tamper long socket bit set 1pcs 3/ Spine & Ribe socket bit set 1pcs 1/ 6pt. Flank deep socket set, 5, 5.5, 6, 7,, 9, 10, 1, 1mm T30H, T0H, T5H, T50H 1pcs 1/ 1pt. Flank socket set, 9, 10, 11, 1, 13, 1, 15, 16, 17, 1, 19mm 10pcs 1/ Star socket bit set T0, T5, T7, T30, T0, T5, T50, T55, T60, T70, 9, 10, 11, 1, 13, 1, 15, 16, 17, 1, 19mm art. no / T, T10, T15, T0, T5, T7, T30, T0, 1pcs 3/ Spline & Ribe long socket bit set art. no art. no pcs 1/ Star socket set 10pcs 1/ Star Tamper socket bit set 9pcs 1/ Spline socket bit set Spline M5, M6, M, M9, M10, M1, M1, M16 Spline T. M16T art. no pcs 1/ 6pt. Flank socket set art. no T55H, T60H, T70H T, T10, T15, T0, T5, T7, T30, T0, T5, T50, 9, 10, 11, 1, 13, 1, 15, 16, 17, 1, 19mm E10, E11, E1, E1, E16, E1, E0, E, E 10pcs 3/ Star long socket bit set Spline M5, M6, M, M9, M10, M1 Ribe M5, M6, M7, M, M9, M10 art. no T5H, T7H, T30H, T0H, T5H, T50H, art. no. 010 Spline M5, M6, M, M9, M10, M1 Ribe M5, M6, M7, M, M9, M10 1pcs 1/ 1pt. Flank deep socket set 10pcs 3/ Star socket bit set art. no T5, T50 art. no art. no art. no pcs 1/ Hex socket bit set TH, T10H, T15H, T0H, T5H, T7H, 3,, 5, 5.5, 6, 7,, 9, 10mm art. no. 0101, 9, 10, 11, 1, 13, 1, 15, 16, 17, 1, 19mm 3/ 9pcs 3/ Ball hex socket bit set art. no art. no ,, 5, 5.5, 6, 7,, 9, 10mm T30H, T0H, T5H, T50H 9pcs 3/ Hex long socket bit set art. no art. no art. no TH, T10H, T15H, T0H, T5H, T7H,, 9, 10, 11, 1, 13, 1, 15, 16, 17mm 10pcs 3/ 1pt. Cardan Socket set 3,, 5, 5.5, 6, 7,, 9, 10, 1mm art. no pcs 3/ Hex socket bit set art. no pcs 1/ Star deep socket set w w w. s o n i c - e q u i p m e n t. c o m 9pcs 1/ & 3/ star cardan Socket set 1pcs 1/ 1pt. Flank socket set art. no. 1010,.5, 5, 5.5, 6, 7,, 9, 10, 11, 1, 13mm art. no , 7,, 9, 10, 11, 1, 13mm 7pcs 1/ Ball star socket bit set,.5, 5, 5.5, 6, 7,, 9, 10, 11, 1, 13mm art. no pcs 1/ 1pt. Cardan socket set 1pcs 1/ 6pt. Flank deep socket set art. no E10, E11, E1, E1, E16, E1, E0, E, E art. no pcs 1/ Ribe socket bit set M5, M6, M7, M, M9, M10, M10-1, M1, M13, M1 9

16 art. no. 110 art. no art. no art. no art. no P O W E R LIGHTS 65 mm 1075 mm cordless rechargeable ULTRA HIGH POWER LIGHT WHITE LEDs 60 mm 50 mm 65 mm 1075 mm cordless rechargeable high power led light 95 leds 60 mm 50 mm High quality fluorescent working light 11 watt SPARE BULB 11 WATT FOR ART. NO mm Extremely powerful pencil light 1w led 30 mtr art. no. 110 art. no art. no. 00 art. no. 10 art. no art. no x adjustable suspension hooks 55 mm 0 mm spotlight 55 mm 0 mm Hook magnet magnet HooK 5 leds spotlight General information General information General information Diameter 70mm Measurements 90x60mm General information With hook and magnet With hook and magnet Pocket size 160x3mm With clip 3 built-in magnets pivet grip 5 mm 55 mm 5 mm 55 mm Battery 3x AAA included Battery 3x AAA included Battery 3x AAA included Place anywhere you want 3 strong built-in magnets + retractable suspension hooks 110 mm 100 mm 110 mm 100 mm available in display box 1 pieces available in display box 1 pieces available in display box 10 pieces 30 light and torch ultra high power LED light ULTRA HIGH POWER LIGHT 1+5 leds 3 bulbs 30 leds LED Light LED Light PEN type LED Light leds + leds 6 leds 31

17 art. no. 111 propulstation, when it s stored it s charged! START ENGINE USE SONIC BOOSTER The most powerful boosters on the market 1/v-1600/00ca Gasoline or diesel, utility, x, second-hand and agricultural service, heavy truck To start diesel engines in V up to: 500HP as booster 50HP as substitute battery The internal fuse protects the batteries against short-circuits and overcharge (overuse). The fixed docking station will automatically charge the Propulstation which results in a sufficient power supply. art. no. 106 art. no MICRO 1V/700CA Gasoline or diesel, utility To start diesel engines up to: 175 HP as booster 15 HP as substitute battery Gasoline engines: Capable to start 50HP without battery art. no. 107 MICRO 1V/00CA Gasoline or diesel, utility To start diesel engines up to: 50 HP as booster 150 HP as substitute battery Gasoline engines: Capable to start a HUMMER H/350HP without battery art. no. 10 1V/100CA Gasoline or diesel, utility, x, second-hand and agricultural service To start diesel engines up to: 350HP as booster 50HP as substitute battery 1/V-00/100CA Gasoline or diesel, light truck, agricultural service, heavy truck, bus, tank, plane, boat,... Perfect for starting engines up to 1500HP which have been stationary for a long time, in extreme temperature conditions from -30 to +60 C, without batteries Practical example: Capable to start a 1500HP 3 litres, Mercedes Leopard tank without batteries art. no /V-300/1600CA Gasoline or diesel, light truck, agricultural service, heavy truck, bus, tank, plane, boat,... Flexible 1V or V for extreme use, 5% more power than the 1/V-00/100CA unit Perfect for starting engines up to 1500HP which have been stationary for a long time, in extreme temperature A buzzer that produces a tone will inform you of an inversion of polarity Massive clamps, fully insulated and ergonomic, with braided copper strap and large opening to fit on the largest battery connectors Accurate and illuminated Voltmeter indicates the recharging level of the booster, the functioning of the charger as well as the good functioning of the alternator of the vehicle The propulstation has two elements: 1) powerful start booster for professional use ) charging station Technical specifications: Model 1v/00ca 1V/100CA V/100CA 1/V 00/100CA 1/V 300/1600CA V 1600CA voltage 1V 1V V 1/V 1/V V Cranking amps 00A 100A 100A 00/100A 300/1600A 1600A Piek amps 370A 3100A 3100A 600/3100A 7750/375A 375A cable length 155cm 155cm 135cm 135cm 10cm 10CM radaflex welding cable size 35mm² 50mm² 50mm² 50mm² 70mm² 70mm² clamps 650A 50A 50A 50A 50A 50A internal fuse on the battery 300A 300A 500A 500A 500A 500A Propulstation (booster + charging station) ART. No. execution Specification 11 vehicle 1V 00CA DC/DC 115 vehicle 1V 100CA DC/DC 116 garage 1V 00CA AC/DC 117 garage 1V 100CA AC/DC 10 vehicle V 100CA DC/DC 11 vehicle 1/V 00/100CA dc/dc 1 garage V 100CA AC/DC 13 garage 1/V 00/100CA AC/DC 17 garage 1/V 300/1600CA 1 vehicle 1/V 300/1600CA 19 garage V 1600CA 130 vehicle V 1600CA Loose charging stations 11 Charging station for vehicle 1V 119 Charging station for garage 1V 1 Charging station for vehicle V of 1/V 15 Oplaadstation voor garage V of 1/V charging station 33

18 art. no art. no. 00 cap. 1350KG art. no. 001 cap. 000KG art. no. 00 cap. 000KG art. no. 003 cap. 3000KG art. no. 11 art. no. 700 / 701 art. no art. no art. no mm Incl. extra rubber pad 95mm 36pcs folding type radio removal tool 50mm Heavy duty Oil drain pan art. no Cable reel 15 meter Cable reel 0 meter art. no Universal tool for installing and removing car radios All applications in one tool Push button design to control holding tool well 5Pcs Master radio toolset art. no watt art. no cap. 50 kg Battery lifter Adjustable handle for car batteries Range up to 190mm Aluminium jack, 1,35 ton t, h: 15-30mm T, H: mm 6t, h: 197-3mm t, h: mm 1, h: 15-00mm 0t, h: -9mm art. no. 03 Garage jack, ton 1 oversized handle rubber protection pad min. height 0mm max. height 375mm capacity ton weight 36,5kg rubber protection pad ergonomic handle nylon wheels min. height 5mm max. height 90mm art. no. 7 art. no. 10 over-extension Jack Stands, 3 Ton capacity 3 ton capacity ton weight 37,kg rubber protection pad ergonomic handle PU tandem wheels min. height 5mm max. height 90mm art. no Garage jack, 3 Ton capacity 3 ton weight 1kg rubber protection pad handle bumper nylon wheels min. Height 130mm max. height 90mm pry bar Spring compressor 50kg 130 pry bar 30mm 1530 pry bar 1650 pry bar 650mm Handheld Infrared Thermometer Hot Air Gun art. no art. no. 70 art. no volt circuit tester 6-V Automotive multitester Handles approximately 90% of all cars Two sets of jaws: pieces ø0-15mm and pieces ø mm art. no cap kg torque wrench Maximum Minimum Garage jack with double wheels, ton Professional car sheet cover, multi-use height 305mm Maximum height mm 10d Nylon with elastic band Washing on 0 degree Colored, with black Sonic letters art. no. 16 art. no. 105 Fender Protector with suction cups Length: 106,5cm Width: 6cm Weight: 30gr art. no / 5-5Nm 3/ 5-50Nm 3/ Nm 1/ Nm 1/ 0-00Nm 1/ Nm 1/ 0-00Nm Ideal for 6/1 and volt systems on cars, motorcycles and commercial vehicles art. no art. no art. no. 701 w w w. s o n i c - e q u i p m e n t. c o m w w w. s o n i c - e q u i p m e n t. c o m BOTTLE JACK capacity,35 ton weight 10kg pcs handle bar bypass and overload valve prevent from Spring compressor 1500 kg Handles approximately 90% of all cars Two sets of jaws: pieces ø0-15mm and pieces ø mm art. no cap. 500 kg torque wrench Creeper 3 ADJUSTABLE ROLLER SEAT PNEUMATIC 5 WHEELS Length 100cm Width cm Height 11,5cm TYRE CARRIER CADDY / -0Nm 3/ 10-60Nm 3/ 0-100Nm 1/ 0-00Nm 1/ 60-30Nm 3/ Nm 3/ Nm 3/ Nm Nm Nm Spring compressor set 500 kg Handles 95% of all cars with wishbone/ multilink suspension rear and front headlamp adjustment tools 1x Hex bit 300mmL 6mm 1x Hex bit 300mmL 7mm 1x Star bit 300mmL T5 Two sets of jaws: small angled jaws Digital multimeter 3 in 1 Digital Multimeter ø90-10mm and small flat jaws for Mercedes and many other car models ø60-10mm 35

19 Screwdrivers art. no art. no art. no art. no art. no art. no Sonic screwdrivers are made of expert quality chrome vanadium and meet or exceed din standards. The Sonic screwdrivers are designed to offer a high torque performance without sacrificing touch or sensitivity. 6PCs SCREWDRIVER SET PH + SLOTTED mm,5mm,6mm,ph1,ph.,ph.3 7PCs SCREWDRIVER SET TORX T10,T15,T0,T5,T7,T30,T0 art. no Light weight Chrome vanadium 5 individually shaped handles to provide perfect grip European hanger + ean-code + art.no. bi-material user comfort, red part polypropylene, black part thermoplastic vulcanizate 0pcs screwdriver set Philips PH.1, PH., PH.3 Philips Stubby PH. Pozidriv PZ.1, PZ., PZ.3 Pozidriv Stubby PZ. slotted 3.5,, 5.5, 6.5, mm slotted Stubby 6.5mm Torx T10, T15, T0, T5, T7, T30 art. no pcs go-through screwdriver set Slotted 5.5, 6.5, mm Phillips PH.1, PH., PH.3 art. no pcs mini hook set art. no art. no art. no in 1 ratchet screwdriver 5pcs screwdriver set in color box Slotted, 5.5, 6.5mm Phillips PH.1, PH. 5PCs SCREWDRIVERS & BIT SET 1/ bit holder phillips screwdriver PH.1, PH. pozidrive screwdriver, 5, 6, mm Phillips bit 1/ PH.3 pozidrive bit 1/ PZ.1, PZ., PZ.3 hex bit 1/,.5, 3,, 5, 5.5, 6mm star bit T10, T15, T0, T5, T30, T0 art. no Screwdrivers PH. 50mm long slotted 50mm long slotted 600mm long art. no art. no art. no PCs DOUBLE END SCREWDRIVER SET 1/ screwdriver stepless ratchet 1/ slotted bits x6, 5x7mm 1/ Phillips bits PH.1xPH. 1/ Pozidrive bits PZ.1xPZ. 1/ hex/ ball bits, 5, 6mm 1/ star bits T10xT15, T0xT5, T30xT magnetic hardened black tip unique ergonomically designed grip For a complete overview of our screwdrivers see our website. excellent user friendly, highly effective grip, for maximum power 1PCs FLEXIBLE HOSE CLIP DRIVER SET pcs VDE Screwdriver set Phillips PH.0, PH.1, PH. Slotted.5,, 5.5, 6.5mm Multifunctional AC / DC voltage tester 15pcs Impact driver set 5/16 bits hex, 5, 6, slotted 5, 6,, 10, 1 Phillips PH.1, PH., PH.3, PH. bit holder 1/ (F)x5/16 (F) 6pcs precision screwdriver set Philips screwdriver PH.00, PH.0, PH.1 Slotted screwdriver 1.5,, 3 6pcs precision torx screwdriver set Torx screwdriver T5, T6, T7, T, T10, T15 3Pcs Precision Screwdriver Set 37

20 Ratchets art. no art. no art. no Sonic has a wide variety of ratchets in her product line which exists of different models. 1/, 3/, 1/, 3/ to 1. Swivel ratchet-7 teeth / / / Rapid ratchet handle (W/Q) TEETH / Rapid ratchet handle (W/Q) teeth / Rapid ratchet handle (W/Q) teeth / Rapid ratchet handle (W/Q) teeth art. no art. no Sonic qrs, quick release system simply press the button to release the socket, even with slippery hands European hanger + ean-code + art.no. Extendable ratchet-7 teeth / Extendable ratchet-7 teeth / Extendable ratchet-7 teeth / Extendable ratchet-7 teeth Rotor head stubby ratchet-7 teeth / / art. no art. no Speedy T-grip / Speedy T-grip 760 3/ Speedy T-grip / Speedy T-grip art. no art. no art. no Universal ball joint 715 3/ / Sliding T-handle universal joint 9pcs magnetic extension set 1/ 50mmL, 100mmL, 50mmL 3/ 75mmL, 150mmL, 50mmL 1/ 50mmL, 15mmL, 50mmL 10PCS 3 TIP HEX KEY SET T-HANDLE,.5,3,,.5,5,6,7,,10mm 1/ and 3/ disc ratchets ratchets for tight spaces ergonomic santoprene thermoplastic handle art. no art. no slim fit th rapid ratchet handle with rotatable head For a complete overview of our ratchets see our website. quick release Disc ratchet-7 teeth / Disc ratchet-7 teeth / Disc ratchet-7 teeth pcs 1/ Torsion Extension set 00mmL 1 extension bar for using up to 90Nm 1 extension bar for using up to 100Nm 1 extension bar for using up to 110Nm 1 extension bar for using up to 10Nm 10PCS 3 TIP STAR KEY SET T-HANDLE T10,T15,T0,T5,T7,T30,T0,T5,T50,T55 39

21 Wrenches art. no art. no art. no keys sizes art. no All Sonic wrenches are manufactured from a high grade of chrome vanadium steel with a superb finishment, tight tolerances on sizes and dimensions. High quality finishment ensures perfect fit on fasteners and user comfort. 5pcs flexible flare nut wrench set, 9, 10, 11, 1mm 9Pcs Combi Wrench set in Pouch 6-19mm 6,, 10, 11, 1, 13, 1, 17, 19mm pcs -in-1 x-gear wrench in pouch -in-1 X-Gear wrench -10, in-1 X-Gear wrench 16-17, 1-19mm 9PCS HEX BALL STUBBY KEY SET 1.5,,.5,3,,5,6,,10 art. no art. no art. no art. no art. no The Sonic wrenches have the ability to bring strength onto the bolts and nuts due to its outstanding grip on the flanks, without damage to any of the material. The possibility to damage the edges of the bolts is no longer an issue. European hanger + ean-code + art.no. 6pcs Extra Long Double Ring wrench set x10, 11x13, 1x1, 13x15, 16x1, 17x19mm art. no. 600 pcs hinged E star wrench set E6XE, E10XE1, E1XE1, E0XE art. no Pcs Combi Wrench set in Pouch 6-mm 6, 7,, 9, 10, 11, 1, 13, 1, 15, 16, 17, 19, mm art. no pcs 1pt. Reversible gear wrench in pouch, 9, 10, 11, 1, 13, 1, 15, 16, 17, 1, 19mm art. no art. no PCS HEX BALL SUPER LONG KEY SET 1.5,,.5,3,,5,6,,10 art. no slim fit, offers a better compromise between power and accessibility slim profile, high quality ensures perfect fit continuously tested for accurate sizing pcs Star wrench set E6xE, E10xE1, E1XE1, E0xE art. no pcs Hinged Hex Bit Set 3X, 5X6, X10, 1X1mm art. no Pcs Combi Wrench set in Pouch 6-mm 6, 7,, 9, 10, 11, 1, 13, 1, 15, 16, 17, 1, 19, 0, 1, mm art. no pcs 6pt. Flat ring ratchet set in pouch, 9, 10, 11, 1, 13, 1, 15, 16, 17, 1, 19mm art. no pcs 1pt. Flat ring ratchet set pouch, 9, 10, 11, 1, 13, 1, 15, 16, 17, 1, 19mm art. no PCS STAR SUPER LONG KEY SET T10,T15,T0,T5,T7,T30,T0,T5,T50 art. no. 601 art. no ergonomic shape, perfect grip streamlined double polished heads improve manoeuvrability and user comfort For a complete overview of our wrenches see our website. minimum tolerance, more powerful tightening reduces stress from larger contact areas and no sharp angles within the tool pcs Star gear wrench set E6xE E10xE1 E1XE1 E0xE Pcs Hinged Star Bit Set in Pouch T15XT0, T5XT7, T30XT0, T5XT50 6Pcs Combi Wrench set in Pouch 6-3mm 6, 7,, 9, 10, 11, 1, 13, 1, 15, 16, 17, 1, 19, 0, 1,, 3,, 5, 6, 7,, 9, 30, 3mm 1pcs 6pt. Flexible ring ratchet set in pouch, 9, 10, 11, 1, 13, 1, 15, 16, 17, 1, 19mm 1pcs 1pt. Flexible gear wrench in pouch, 9, 10, 11, 1, 13, 1, 15, 16, 17, 1, 19mm 10PCS COMBINATION WRENCH SET IN POUCH,9,10,11,1,13,1,15,16,17,1,19 10PCS EXTRA LONG COMBINATION WRENCH SET IN POUCH 10,11,1,13,1,15,16,17,1,19 1

22 Professional tools of top quality art. no art. no art. no art. no art. no art. no art. no art. no art. no pcs 3/ torx & spline socket bit set 3PCS 1/`` IMPACT SOCKET SET 17, 19, 1mm thin wall plastic stop length 105mml 6pcs impact adaptor set 6pcs 1/ socket set 13pcs 1/ & 3/ & 1/ star cardan socket set art. no art. no art. no art. no art. no art. no pcs 1/ multi grip socket set 3pcs 1/ Wheel socket set 3pcs 1/ Torque impact socket set 3pcs 1/ Torque impact adaptor set 6pcs 1/ impact socket bit set art. no pcs 1/ Pentagon Socket set Torx T70, T0, T90, T100 Spline M16, M1 impact deep socket 30, 3, 36 impact hex socket bit 1, 17, 19 3pc mm Precision bit set 13pc Combination bit set art. no pcs 1/ Bit set 6pcs 1/ 6pt. Flank socket set 61pcs 3/ 6pt. Flank socket set art. no art. no art. no , 19, 1mm max. 00Nm art. no. 107 M1, M16, M1 Length 3mml & 7mml 6pcs 1/ diesel injector socket set art. no art. no art. no art. no pcs 3/ Glow Plug Socket set 3PCS 1/`` 1PT. HUB NUT IMPACT SOCKET SET pcs 1/ Universal ball joint impact hex socket set art. no art. no art. no pcs Glow plug torque set 5pcs 1/ 6pt. hub nut impact socket set philips, slotted, hex torx t10, t15, t0, t5, t7, t30, t0 art. no pcs 3/ 1pt. Flank socket set pcs 10mm bit set 1pt. sockets 19-50mm extension 100mml, 00mml art. no art. no pcs adaptor set 736,61 art. no , 3, 36mm w w w. s o n i c - e q u i p m e n t. c o m w w w. s o n i c - e q u i p m e n t. c o m art. no hex universal socket bit 5, 6, 7,, 10, 1, 1, 17 69,- 1pcs 1 1pt. Flank socket set 73pcs star set 19pcs 1/ disc ratchet set 6,, 9, 10, 1mm ph, slotted, hex 9pcs 1/ & 1/ 6pt. Flank socket set 3pcs special socket bits 1 pt sockets 36, 1, 6, 50, 55, 60, 65, 70, 75, 0mm e xtension 00mml, 00mml 10pcs 1/ head bolt removal set 1/ IPR 1/ hex, star, star-tamper, spline, ribe mm (15Nm) 10mm (1Nm) 1mm (1Nm) 30, 3, 3, 35, 36mm pcs 1/ Universal ball joint impact star socket set star universal socket bit T30, T0, T5, T50, T55, T60, T70, T0 1Pcs Oxygen Sensor socket set 3

23 art. no art. no pcs Fuel line disconnect set art. no ratchet mechanism crimper stands for superior labour saving - quick insertion changing of jaw without any tool - professional aisi 10 alloy steel crimping jaws - ergonomic comfort-grip handle art. no pcs Hose Line clamp set art. no Cable Hose Clamp Removing Pliers Flexible art. no art. no art. no Sand filled hammer 00g machinist hammer 00gr fibre handle Stoning hammer 100Gr Fibre handle art. no. 10 art. no art. no art. no Pocket stripper 10-0AWG pcs electrical connection clip remover Air bag removal tool set art. no art. no. 600 art. no pcs Pry bar set, 1, 1, art. no Crimping tool set with ratcheting function and adjustable jaws Includes 6 exchangeable crimping jaws Insulated terminal ends DIN 0.5-6mm² N on-insulated terminal ends DIN mm² O pen barrel terminal ends DIN mm² Insulated cord-end terminal DIN 0.5-6mm² (for small sizes) Insulated cord-end terminal DIN 0.5-6mm² (for large sizes) O pen barrel terminal & D-SUB,V3.5 art. no art. no riveting pliers 10.5 art. no art. no art. no pcs Pry bar set Bent pry bar Bent forked pry bar 1 Elbow bent pry bar 1 Extended pry bar art. no pcs Pry remover set Water pump pliers 10 art. no Tower pincers 0mmL art. no Locking pliers 10 art. no hose clamp pliers art. no w w w. s o n i c - e q u i p m e n t. c o m w w w. s o n i c - e q u i p m e n t. c o m 7pcs Professional Ratchet Crimping Pliers set 3Pcs Indexable Ratcheting Pry Bar Set flat band hose clamp pliers 3pcs wedge utility set Extra slim and unique shape for delicate jobs such as removing small rivet or fine trims, bezels of dashboards, door panels, door locks, electronic seat controls, gear shifter, inner lining, etc. art. no art. no art. no art. no pcs pry bar remover set 7pcs Pry removal master kit Indexable Ratcheting Pry Bar low easy access into areas which are difficult to reach Adjustable head allow choice of up to different angles High leverage gear design provides maximum leverage while lifting and cutting back Fast and easy adjustable Thin feet For using/disassembling: gearbox, cilinderhead, waterpump and other parts of car Pcs Plastic scraper set Oil filter pliers hose clip pliers hose clamp pliers (angle type) flat band hose clamp pliers wheel weight balance pliers pcs Wegde Utility Set nonmarring scraper set. remove body side moldings, emblems, gaskets, decals without damage to metal, glass or paint. Includes 3/ - 7/ 1 and 1.1/ scrapers. 5

24 art. no art. no pcs 1/ Spiral socket set 10pcs 3/ Spiral socket set Removes round and damaged nuts and bolts mm art. no art. no art. no Removes rounded/ damaged nuts and bolts 10, 11, 1, 13, 1, 15, 16, 17,19mm 3/ Bolt Twister socket set 6pc 16pcs Brake calliper service set (Pneumatic) art. no. 106 art. no art. no art. no art. no. 703 art. no art. no. 100 oxygen sensor wrench 1Pcs Brake calliper service set art. no Brake fluid tester art. no. 701 pcs Wiper arm Puller set art. no. 70 art. no pt. wrench mm with flexible head. Suitable for heated and unheated oxygen 0pcs 3/ & 1/ Crawfoot set art. no. 703 art. no. 70 sensors. art. no / 10, 11, 1, 13, 1, 15, 16, 17, 1, 19mm 1/ 0, 1,, 3,, 5, 6, 7, 30, 3mm pcs 1/ Twist socket set Sizes mm art. no pcs 1/ & 1/ Spiral socket set art. no Pcs Alternator pulleys Removes and installs press-on-type belt drive accessory pulleys art. no pcs 3/ drain plug key art. no / Bolt Twister socket set 5pc art. no three-leg oil filter wrench (63-10MM) art. no pcs Brake calliper tools 0pcs Brake calliper set art. no art. no pcs Cup type oil filter wrench kit 30pcs Oil filter cap set in blouwmold case fits 3/ f 1/ drive tool art. no Ball joint separator (jaw 0mm) art. no Fits 3/ f 1/ drive tool art. no Ball joint separator (jaw 0mm) Ball joint separator (jaw mm) Ball joint separator (jaw mm) JAWS GRIP TIGHTER AS MORE PRESSURE IS APPLIED REVERSIBLE JAWS DROP FORGED ALLOY STEEL HARDENED 5 HRC jaw 3 reversible puller jaw reversible puller jaw 6 reversible puller art. no art. no art. no art. no pcs Terminal release tool set 1pcs Terminal release tool set Magnetic tray 15cm Magnetic tray 6 x 9 x 1cm Available in display with 9 pieces Available in display with 10 pieces art. no art. no w w w. s o n i c - e q u i p m e n t. c o m w w w. s o n i c - e q u i p m e n t. c o m reversible puller art. no nitrile coated glove Nylon with Nitrile coating. The Nitrile coating is fluids resistance. For better fit and more comfort, only the gripping part is coated. Slide hammer puller set 1Pcs Alternator pulleys Removes and installs press-on-type belt 6 drive accessory pulleys 0pcs 1/ Master drain plug key and filter set Metal band filter wrench diameter three-leg oil filter wrench (65-10MM) 15pcs Cup type oil filter wrench kit Fits 3/ f 1/ drive tool This most useful tool can pull flange-type rear axles, remove stubbon oil seals & bearing or press-fit parts. Use as a dent puller or lip puller, reversible jaws can be set up for /3 jaw in-external usage, 1/ -0 thread adaptor expands the slide hammer for extra pulling functions. Breathable and ergonomic fit due to booster cable partly coated finger tips. EN 3 and 31 European standards. Black-Red 1701 Nitrile Coated Glove Size (medium) 170 Nitrile Coated Glove Size 9 (large) 1703 Nitrile Coated Glove Size 10 (extra large) 15pcs Terminal release tool set 16pcs Terminal release tool set Isolated metal clamps Zipper bag 116 Booster Cable (10mm²).5 meters metal clamps 11 Booster Cable (16mm²) 3.5 meters metal clamps 1150 Booster Cable (5mm²) 3.5 meters metal clamps 1151 Booster Cable (35mm²) 3.5 meters metal clamps 1153 Booster Cable (50mm²).0 meters metal clamps 7

25 art. no. 100 art. no art. no. 101 art. no art. no art. no art. no. 101 art. no art. no art. no pcs Oil pressure test set 16pcs Blind hole bearing puller set 3pcs Tooth belt tool set 7pcs hose clamp pliers set 5pcs Damper pulley puller holder wrench set art. no. 101 art. no. 100 art. no art. no art. no pcs Clutch Alignment tool set art. no Two sets gear & bearing split tools art. no Pcs Radiator Pressure test set art. no pcs master compression test set art. no leak back test set art. no pcs Common rail flow meter set art. no Pcs Diesel injector seat cleaner set art. no. 60 Belt Gauge this tensioning gauge can be used to adjust the tension on the cam belts where the movement of the timing belt is measured by load art. no. 010 Utility Magnetic impact Tool Holder 9,5 x 37cm black coated flat panel/grey rack & holder with two magnetic pad art. no Flat chisel 0mmL art. no Stop go function 15pcs Clutch Aligner set 15-mm Volvo crankshaft alignment tool 19pcs Camshaft & Crankshaft Locking set pcs Petrol Engine Compression test set Pcs Fuel & Air Conditioning Tool set Shears Utility knife auto load art. no pcs spare blades in holder flexible pick up claw flexible magnetic pickup 500 gr measuring tape 5 meter art. no art. no. 100 art. no art. no art. no. 103 art. no. 10 art. no art. no. 60 art. no art. no art. no. 115 Axial Joint Tool Axial joint tool set, 30-5mm Pcs Ignition coil puller set 9pcs Test lead set pcs Air conditioning Spring Lock Coupling set Hacksaw 15 mml universal knife available in display with pcs flexible magnetic 010 flexible magnetic pickup gr 0103 flexible magnetic pickup gr extendable magnet pickup, kg available in display with 16 pcs steel wire brush available in display with 1 pcs 9

26 art. no art. no. 010 art. no sonic-equipment.com social media Use our website View over more than 3000 articles. everything is there to find, new articles, detailed information, promotion flyers, catalogue, movies, sponsorship, information about exhibitions, photos, etc. you will be surprised about the possibilities and amount of information! Sonic is very successfully in 50 countries. Join the winning team, join Sonic Equipment. like sonic 1/ Impact wrench 600Nm pin clutch hammer system for fast torque built-up air exhaust through handle with cushion grip directs air away from working area three position power regulator for forward direction, full power on reverse push and reverse button maximum torque: 600Nm speed: 6500 min 1 square drive: 1/ working torque: 00Nm max. torque: 600Nm length: 00mm weight:,1kg air consumption: 17l/m air inlet: 1/ vibration: 6,7m/s² sound pressure: 5,0dB (A) art. no / Impact wrench 950Nm durable and powerfull TWIN-HAMMER clutch system motor housing made of composite material air exhaust through handle, three power settings in forward direction and full power on reverse maximum torque: 950Nm speed: 6000 min 1 square drive: 1/ working torque: Nm max. torque: 950Nm length: 19mm weight:,0kg air consumption: 150l/m air inlet: 1/ vibration: 6,7m/s² sound pressure: 5,0dB (A) art. no / Impact wrench 1550Nm durable and powerfull TWIN-HAMMER clutch system motor housing made of composite material air exhaust through handle, three power settings in forward direction and full power on reverse maximum torque: 1550Nm speed: 000 min 1 square drive: 3/ working torque: Nm max. torque: 1550Nm length: 0mm weight: 3,Kg air consumption: 10l/m air inlet: 1/ vibration:,m/s² sound pressure: 5,0dB (A) art. no Neatly arranged in kind sign up to twitter visit Sonic TV Sign up for our newsletter 50 Multi purpose pan, 0 liter multi purpose pan, plastic, black pan volume 0 ltr. drain spout for easy emptying loop for pulling ang hanging up the pan dimensions approx. 65 x 667 x 65mm (l x w x h) Multi purpose pan, 50 liter multi purpose pan, plastic, black pan volume 50 ltr. drain spout for easy emptying dimensions approx. 00 x 600 x 100mm (l x w x h) Multi purpose pan, 70 liter multi purpose pan, plastic, black pan volume 70 ltr. drain spout for easy emptying dimensions approx. 950 x 60 x 100mm (l x w x h) Homepage Article detailed described 51

27 dealer: ARC tools CO., LTD. No., Ln. 30, Zhonghe Rd., Daya Dist., Taichung City, Taiwan Tel Fax more information available on our website or the Sonic catalogue The dimensions, drawings and illustrations contained in this folder shall not be binding and may be modified by us without further notice. All rights reserved.