HP2-N29. HP- HP2-N29 Understanding HP TippingPoint Solutions

Transcription

1 HP- HP2-N29 Understanding HP TippingPoint Solutions 1

2 QUESTION: 1 How does HP TippingPoint provide filter updates? A. TippingPoint Operating System B. IGRP C. Digital vaccine D. Hot Patch Install Vaccine filters) QUESTION: 2 A TippingPoint Operating System (TOS) can be downloaded from which website? A. TOS.tippingpoint.com B. TMC.tippingpoint.com C. HTC.tippingpoint.com D. SMC.tippingpoint.com QUESTION: 3 Which value is required during the IPS OBE process? A. filter changes B. serial number C. TOS version number D. security level QUESTION: 4 The TippingPoint IPS Command Line Interface (CLI) is accessed using which protocol? A. SNTP B. VoIP C. TOS D. SSH Answer(s): D 5, see IPS local clients, 2ndbulleted point) 2

3 QUESTION: 5 What is the default user access granted when creating a new local user on the IPS? A. Operator B. SuperUser C. Undefined D. Administrator 14,Roles) QUESTION: 6 What are the types of user roles on an HP TippingPoint IPS? (Select three.) A. SuperUser B. Administrator C. PowerUser D. Filter Admin E. Operator Answer(s): A,B,E 14) QUESTION: 7 What does "SMS" stand for? A. System Management Solution B. Safe Management System C. Security Management System D. Safety Management System HP_S_Intrusion_Prevention_System_(IPS)_N_Series/index.aspx( Features tab) QUESTION: 8 To manage an IPS with an SMS. the user must enter which three pieces of information? A. IPS superuser name, IPS address, IPS superuser password B. device name, password, serial number C. IP address, device name, password D. operator ID, password, device name 3

4 QUESTION: 9 Which pieces of information are needed to log in to the TippingPoint SMS? A. IP address, username, password B. TOS, DV, password C. Username, password, time of day D. model number, serial, password Answer(s): A ge 43) QUESTION: 10 Which settings are specified when configuring an IPS Segment? A. Duplex. L2FB. and YYZ B. Segment Name, Link Down Synchronization, andintrinsic HA C. Link Down Synchronization, Symmetry, and Duplex D. Segment Name, L2FB, and Link Down Synchronization 117) QUESTION: 11 On the IPS, what is a Physical Segment consisted of? A. a single inspection port B. the serial console interface C. the management interface D. a pair of network ports 165) QUESTION: 12 Which task does the IPS Device Configuration dialog allow you to perform? A. access the security profiles B. review the system and audit logs C. a read-only overview of device settings D. all IPS settings to be edited 4

5 QUESTION: 13 How are Segment Groups utilized when applying security policies? A. to configure the Traffic Management Filters B. Security policies are applied directly to the physical segments. C. to configure the Advanced DDoS Filters D. as a logical grouping of similar physical segments =reg_r1002_usen(page 12, physical segments, second paragraph) QUESTION: 14 When you change a category, how will new filters added to that category behave? A. They will assume the defined category setting. B. They will set to block and notify until reviewed. C. They will assume the defined category setting. D. They will be disabled until reviewed. QUESTION: 15 The Digital Vaccine is a container consisting of what? A. filters organized into 15 categories B. filters organized into 12 categories C. the Virus Vaccine policy D. the Anti-Virus definitions QUESTION: 16 What is an IPS profile? A. a collection of filter comments B. the interface settings for the segment C. a collection of filter policy settings D. the Segment Group for the interfaces =reg_r1002_usen(page 150) 5