The Evolution of HVAC Software and the Revolution of BIM!
|
|
|
- Marybeth Cole
- 9 years ago
- Views:
Transcription
1 ! Presented by Joseph V. Simmons, P.E.
2 What What has been! What is! And what will---be the role of software in the HVAC industry? FOR Consultants Contractors Manufacturer s Representatives Building Owners
3
4 Building Loads Hand Calculate TI 59 Calculator Spreadsheets Carrier CHVAC ELITE Trane
5 Manufacturers Equipment Selection Pump Manufacturers Heat Exchanger Expansion Tanks Selections of COILS Fan Manufacturers Major Manufacturers: Trane, York, Carrier, and McQuay WOW
6 Energy Analysis DOE2 / equest Blast Energy Pro Visual DOE Green Building Studio! Carrier HAP Trane
7 What is BIM?
8 BIM Terminology from ASHRAE BIM
9 BIM Terminology from ASHRAE BIM 3-D BIM
10 BIM Terminology from ASHRAE BIM 3-D BIM 4-D BIM
11 BIM Terminology from ASHRAE BIM 3-D BIM 4-D BIM 5-D BIM
12 BIM Definition from ASHRAE BIM: Human activity of using BIM software and technologies to model the building.
13 BIM Definition from ASHRAE 3D BIM: A model that includes 3-D shapes.
14 BIM Definition from ASHRAE 4D BIM: A 3D BIM that has cost information.
15 BIM Definition from ASHRAE 5D BIM: A 4D BIM that has a schedule and time constraints.
16 WHY is BIM so important to us NOW and in the FUTURE?
17 It s All About POWER The rate at which work is performed. Loads Energy Analysis
18 It s All About POWER To our projects and clients in making better decisions and choices, and about getting projects built RIGHT and in less time!
19 What is the Power of Building Information Modeling (BIM)?
20 ASHRAE Definition Building Information Modeling: The ability to allow the whole building or system to be optimized in lieu of optimizing individual components.
21 What Software Models the Whole Building and all of it s Systems?
22 Not any that I know of!
23 IPD Integrated Project Delivery Using powerful programs to optimize our buildings and systems! Procedure Cost and Schedule
24 Powerful Programs/Platforms Autodesk and Bentley Products Revit, Micro-station gbxml Loads Software Energy Analysis HVAC Solution Manufacturer s Programs
25 General Office Accounting QuickBooks, Sage, Timberline Project Management Microsoft Project, Newforma, Primavera, Excel Cost Estimation RS Means, QuickPen, Quotesoft Marketing PowerPoint, InDesign, Photoshop, ACT! Specification MasterSpec, e-specs, SpecLink General, Word,???
26 WHAT is the 1,000 Pound Gorilla?
27 Autodesk Revit Gorilla s Appetite Training Costs Software Costs Computer Costs Two Big Monitors Slow and Hard to work with! 9,10, 11
28 Our Clients are Typically Architects! Traditional Design, Bid and Build Mechanical Engineer is Prime Design Build We Work for Contractors Design Build Contractors Work for Us????
29 Deliverable Phases Schematic Design Design Development Construction Documents Construction Administration As-Built Drawings
30 Be a Flexible Team Player Understand the Client and Project Who are we working for? Deliverable phases How can we be cost effective to meet the budget and schedule using powerful programs and IPD?
31 3 Methods of Integrated Project Delivery
32 Integrated Project Delivery Method #1 Autodesk Revit Run Loads Inside of Revit Size and Optimize System? Duct sizing in Revit Other systems as you currently do! Hand calculations, Excel?
33 Integrated Project Delivery Method #1 Final Deliverables, BIM and 3D BIM Detailed Calculations Ductwork and Piping Layout 3D Revit, Rfa Files Equipment Schedules Schematics, Air Flow, Hydronic, and Steam Details of Equipment Bills of Materials/Cost Estimation Specifications
34 Integrated Project Delivery Method #2 Autodesk Revit Export gbxml file from Revit Import gbxml file, run loads Carrier Elite CHVAC TRANE Size and optimize system? Duct sizing in Revit Other systems as you currently do Hand calculations, Excel?
35 Integrated Project Delivery Method #2 Final Deliverables, BIM and 3D BIM Detailed Calculations Ductwork and Piping Layout 3D Revit, Rfa Files Equipment Schedules Schematics, Air Flow, Hydronic, and Steam Details of Equipment Bills of Materials/Cost Estimation Specifications
36 Integrated Project Delivery Method #3 Autodesk Revit Export gbxml file from Revit Import gbxml file, run loads Carrier Elite CHVAC Trane Import gbxml file into HVAC Solution, then size and optimize systems
37 Integrated Project Delivery Method #3 HVAC Solution Output Equipment Schedules Equipment Selection Detailed Calculations Air Flow, Hydronic and Steam Schematics Details of Equipment Bills of Materials/Cost Estimation Electrical Coordination Schedule Control Points Revit Files, RFA
38 Integrated Project Delivery Method #3 Final Deliverables, BIM and 3D BIM Detailed Calculations Ductwork and Piping Layout 3D Revit Revit RFA File Equipment Schedules Schematics, Air Flow, Hydronic and Steam Details of Equipment Bill of Materials/Cost Estimation Specifications
39 Back to the BIM Terminology from ASHRAE BIM Optimize the System 3-D BIM 3-D Model Something to think about! 4-D BIM Cost 5-D BIM Time/Schedule
40 What BIM or 3D BIM Deliverables Will You Share With Others? Share with the Contractor? YOU Share with Other Consultants? Share with the Facilities People? Share with the Owner? Share with the Reps?
41 Two Simple Examples Floor plan from Architect 30 years ago How many of us currently run or review loads?
42 Shifting of Work! Optimize the Mechanical Systems Controls Energy Analysis LEED Construction Administration Building Commissioning What are we going to share? 4D, 5D
43 As Consultants Representatives Contractors Building Owners We have to stay on top of our game!
44 Q & A
Performance by design. Autodesk Revit MEP
Performance by design. Autodesk Revit MEP Step up to the challenge. Autodesk Revit MEP software helps mechanical, electrical, and plumbing engineering firms meet the heightened demands of today s global
2012 BIM Guidelines and Standards (Rev. 00) University at Albany
A. Building Information Modeling (BIM) Guidelines: The Office of AECM will require the submission of BIM modeling files as part of an electronic file submission to the AECM project manager as requested
School Building Authority of West Virginia BUILDING INFORMATION MODELING (BIM) EXECUTION PLAN SBA FORM 191
School Building Authority of West Virginia BUILDING INFORMATION MODELING (BIM) EXECUTION PLAN SBA FORM 191 Section 1: General 1.0 Alignment with Organizational Vision In the space provided below, read
Building Information Modeling for MEP Engineering. Revit MEP 2008
Building Information Modeling for MEP Engineering Revit MEP 2008 Design Intuitively with Tools That Work the Way Engineers Think Revit MEP software is an intuitive design tool that works the way engineers
Performance by design. Autodesk Revit MEP
Performance by design. Autodesk Revit MEP Step up to the challenge. Autodesk Revit MEP software helps mechanical, electrical and plumbing engineering firms meet the heightened demands of today s global
HOURLY ANALYSIS PROGRAM QUICK REFERENCE GUIDE
HOURLY ANALYSIS PROGRAM QUICK REFERENCE GUIDE COPYRIGHT 1998-2015 CARRIER CORPORATION [This page has been left blank intentionally] HAP Quick Reference Guide Software Systems Network Carrier Corporation
The use of BIM in plumbing projects creates deeper project knowledge, delivers a more robust product, and can reduce total project costs.
BIM for plumbing design The use of BIM in plumbing projects creates deeper project knowledge, delivers a more robust product, and can reduce total project costs. BY JUNCHENG (JAMES) YANG, PE, CPD, LEED
BIM: FOR PROJECT MANAGERS. 2011 CSI Southwest Region Conference Program 1B 8:45am 11:00am
BIM: FOR PROJECT MANAGERS ANA BAKER BRANDON GARRETT 2011 CSI Southwest Region Conference Program 1B 8:45am 11:00am 1 2 3 4 BIM Overview BIM Level of Development Evolution of the Drawing Process BIM Workflow
SPECIAL ISSUE: NATIONAL SCIENCE FOUNDATION WORKSHOP
research journal 2013 / VOL 05.01 www.perkinswill.com SPECIAL ISSUE: NATIONAL SCIENCE FOUNDATION WORKSHOP ARCHITECTURE AND ENGINEERING OF SUSTAINABLE BUILDINGS Current Trends in Low-Energy HVAC Design
Proceedings of Meetings on Acoustics
Proceedings of Meetings on Acoustics Volume 19, 2013 http://acousticalsociety.org/ ICA 2013 Montreal Montreal, Canada 2-7 June 2013 Architectural Acoustics Session 5aAAa: Room Acoustics Computer Simulation
Interoperabilidad entre BIM y software de eficiencia energética. Danny Lobos
Latam Sustentable 2015 Congreso Internacional 25 de agosto de 2015 Interoperabilidad entre BIM y software de eficiencia energética Danny Lobos Arquitecto Dr Ing Bauhaus Alemania, profesor, investigador
Building Information Modeling Management To Facility Management
To Building Information Modeling Management To Facility Management I: INTRODUCTION - aaecs Team Thomas J. Jeff Prine, CCM, LEED AP COO Program / Facility Management Specialist Bonnie K. Gorman, Assoc.
Transition to 3D Fabrication Workflows
Autodesk Autodesk Fabrication Solutions Transition to 3D Fabrication Workflows Autodesk is committed to the use of Building Information Modeling (BIM) to drive integrated and connected data across the
HYDRONIC DESIGNER / INSTALLER MODULE DESCRIPTIONS
HYDRONIC DESIGNER / INSTALLER MODULE DESCRIPTIONS PIP301: Blueprint Reading This module covers the basic skills required for interpreting information provided by drawings. These skills are essential in
Realizing the Future of Sustainable Design through BIM and Analysis
MEP ENGINEERING Realizing the Future of Sustainable Design through BIM and Analysis By Robert E Middlebrooks, AIA In the United States, buildings are responsible for almost half of all annual green house
Using BIM In HVAC Design
This article was published in ASHRAE Journal, June 2010. Copyright 2010 American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. Posted at www.ashrae.org. This article may not be
How To Design A Bim Project
BIM Virtual Construction & Integrated Project Delivery Randy LaNear BIM Manager Barnhart - Heery Synonyms & Related Terms Integrated Practice Integrated Project Delivery Virtual Building (Environment)
Olilo's AEC Design Services. SrinSoft Inc, Partners of
Olilo's AEC Design Services SrinSoft Inc, Partners of Olilo provides design services that include design and analysis, cost estimation, 3D modeling, 2D drafting, conversion from 2D to 2D, quantity take-off,
ENHANCED LABORATORY HVAC SYSTEM
ENHANCED LABORATORY HVAC SYSTEM INTRODUCTION Since the early 1980's the attention to more energy efficient laboratory designs has been on the rise due to the increase in energy cost and the emergence of
ENERGY AUDITS AND RETRO- COMMISSIONING Local Law 87
ENERGY AUDITS AND RETRO- COMMISSIONING Local Law 87 Overview Although energy-efficiency retrofits generally result in major cost and energy savings, many buildings are not participating in the audits that
Building Information Modeling (BIM) Requirements for PT Projects Today s Capabilities for a BIM based Design
Building Information Modeling (BIM) Requirements for PT Projects Today s Capabilities for a BIM based Design Florian Aalami CEO ADAPT Corporation [email protected] What is BIM? The ability to model
Design Consultant (Electrical Services) Design Deliverables and Responsibilities Allocation (Stage E+)
Design Consultant (Electrical Services) Design Deliverables and Responsibilities Allocation (Stage E+) 1. In addition to the information scheduled below, the pre-tender designer is responsible for: (i)
Mechanical Insulation. Hospitals and Schools
Study on Mechanical Insulation in Hospitals and Schools March 1, 2011 Study Mechanical Insulation in Hospitals and Schools G. Christopher P. Crall, P.E. Ronald L. King Executive Summary Mechanical insulation
Total Building Commissioning: Case Study of the U.S. District Courthouse in Salt Lake City, Utah, USA
Total Building Commissioning: Case Study of the U.S. District Courthouse in Salt Lake City, Utah, USA Boggarm S. Setty, P.E., Fellow ASHRAE Setty & Associates, Ltd. 3040 Williams Drive, Suite 600, Fairfax,
WESTERN MICHIGAN UNIVERSITY
WESTERN MICHIGAN UNIVERSITY Facilities Management Department DeVon Miller Building Commissioning Administrator 1 INTRODUCTION DeVon C. Miller, CPMP, LEED AP Building Commissioning Administrator Engineering
Autodesk Revit Architecture. Design without compromise.
Autodesk Revit Architecture Design without compromise. Definitive Design From conception to construction documentation, design projects within an intuitive environment. Building information modeling and
LACCD Building Information Modeling Standards For Design-Bid Build Projects
LACCD Building Information Modeling Standards For Design-Bid Build Projects (LACCD BIMS) Interim Version 2.0 Prepared by: September 9, 2009 TABLE OF CONTENTS 1. INTRODUCTION 1 1.1. Overview 1.2. Main Objectives
An Integrated Conceptual Design Process for Energy, Thermal Comfort, and Daylighting
An Integrated Conceptual Design Process for Energy, Thermal Comfort, and Daylighting Prepared for: Jim Sweeney Director of the Precourt Institute for Energy Efficiency; Professor of Management Science
Mechanical Systems Proposal revised
Mechanical Systems Proposal revised Prepared for: Dr. William Bahnfleth, Professor The Pennsylvania State University, Department of Architectural Engineering Prepared by: Chris Nicolais Mechanical Option
Execution Plan Template Design Modeling
Execution Plan Template Design Modeling NEW CONSTRUCTION By signature below, this Execution Plan is herewith adopted and incorporated into the Agreement, dated, for Professional Design Services between
Revit MEP. Autodesk Navisworks
What is BIM? Autodesk BIM is an intelligent model-based process that helps owners and service providers achieve business results by enabling more accurate, accessible, and actionable insight throughout
A WORKFLOW ANALYSIS FOR BIM SOFTWARE: ARCHITECTURAL AND MECHANICAL ENGINEERING DEPARTMENT OF ARUP TURKEY
ISTANBUL TECHNICAL UNIVERSITY FACULTY OF ARCHITECTURE DEPARTMENT OF DESIGN COMPUTING BIM 2037 / BUILDING INFORMATION MODELS INSTRUCTOR: Salih OFLUOĞLU A WORKFLOW ANALYSIS FOR BIM SOFTWARE: ARCHITECTURAL
Perkins Eastman is an Equal Opportunity Employer and a participant in the Federal E-Verify program. EOE/M/F/D/V
BOSTON Architectural Designer I The Architectural Designer will assist the project architect in tasks necessary to complete project documentation and construction administration duties consistent with
Design without compromise. Autodesk Revit. Architecture
Design without compromise. Autodesk Revit Architecture Definitive Design From conception to construction documentation, design projects within an intuitive environment. Building information modeling and
Using Autodesk Fabrication Software from TSI
Using Autodesk Fabrication Software from TSI Photo courtesy of Lend Lease COMPANY BACKGROUND Walsh Mechanical Contractors is a full service, commercial mechanical contractor serving Eastern New England,
Topics for Today. Order of Magnitude Mechanical Estimating. Order of Magnitude Estimate Goal. Project Delivery Methods. Questions for Client
Order of Magnitude Mechanical Estimating Justin Apprill, P.E. Topics for Today Estimate Goals A Concept for Accurate Conceptual Estimating HVAC Systems Common System Types and Rules of Thumb Pricing Example
for K-12 School Buildings
Advanced Energy Design Guide for K-12 School Buildings HVAC Section John Murphy Applications Engineer, LEED AP Trane La Crosse, Wisconsin [email protected] www.trane.com AEDG-K12 HVAC Subcommittee John
Element D Services Heating, Ventilating, and Air Conditioning
Load Calculation Criteria PART 1 - GENERAL 1.01 OVERVIEW A. This section includes requirements for calculating HVAC cooling and heating loads. B. Load calculations must be performed in accordance with
School of Architecture Computer Requirement
School of Architecture Computer Requirement Updated June 3, 2015 ALL STUDENTS IN THE SCHOOL OF ARCHITECTURE ARE REQUIRED TO PROVIDE THEIR OWN PERSONAL LAPTOP COMPUTER. All ENTERING GRADUATE STUDENTS in
CURRICULUM VITAE PERSONAL INFORMATION
CURRICULUM VITAE PERSONAL INFORMATION Name: Hanan Fayez Mohammed Al-Fakhouri Date of Birth: 30 th Aug. 1980 Place of Birth: Kuwait Place of Residence: Jeddah K.S.A Nationality: Jordanian Marital Status:
BIM GUIDE. Developed for
BIM GUIDE Developed for BIM GUIDE Protocols and Project Execution Plan 1 Table of Contents.. Objective... P. 4.. Roles & Responsibilities... P. 5.. Contract Strategies... P. 8.. Level of Development...
Getting Started with Web Service Tools for Whole Building Analysis
Autodesk Ecotect Analysis 2010 Getting Started with Web Service Tools for Whole Building Analysis Customers who add subscription to their Autodesk Ecotect Analysis license can access 1 whole building energy,
Preliminary Final Proposal
1 Butler Memorial Hospital New Inpatient Tower Senior Capstone Project Mechanical Option Preliminary Final Proposal Mechanical System Re-design and Breadth Topics Butler Memorial Hospital New Inpatient
Design without compromise. Autodesk Revit. Architecture 2010
Design without compromise. Autodesk Revit Architecture 2010 BIM Simply a Better Way of Working Deliver projects faster, more economically, and with enhanced potential for reduced environmental impact.
BIM to Sim. Drury B. Crawley, Ph.D. FASHRAE, BEMP, FIBPSA, AIA Bentley Systems, Inc.
BIM to Sim (How do I get that rich data into my simulations without re-entering?) Drury B. Crawley, Ph.D. FASHRAE, BEMP, FIBPSA, AIA Bentley Systems, Inc. Building Energy Simulation Forum 18 December 2013
Autodesk Revit LEARNING PATH BUILDING DESIGN SUITE
Autodesk Revit LEARNING PATH FUNDAMENTALS Duration: 3 days Cost: R5 500 (excl VAT) Revit MEP Duration: 3 days Cost: R5 500 (excl VAT) Revit Structure Duration: 3 days Cost: R5 500 (excl VAT) REVIT ADVANCED
BUILDING INFORMATION MODELING SCOPE OF SERVICES AND REQUIREMENTS FOR CONSTRUCTION CONTRACTOR IN A DESIGN- BID-BUILD PROCESS
BUILDING INFORMATION MODELING SCOPE OF SERVICES AND REQUIREMENTS FOR CONSTRUCTION CONTRACTOR IN A DESIGN- BID-BUILD PROCESS Final Version March 16, 2011 TABLE OF CONTENTS Page Contents 1. Introduction...
FREQUENTLY ASKED QUESTIONS about HERS and CHEERS Provided by the California Energy Commission Consumer Energy Center
http://www.energy.ca.gov/ FREQUENTLY ASKED QUESTIONS about HERS and CHEERS Provided by the California Energy Commission Consumer Energy Center Relevant Standard The Residential Manual for Compliance with
B. ASTM C 533 Calcium Silicate Block and Pipe Thermal Insulation. C. ASTM C 547 Mineral Fiber Preformed Insulation
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
BIM and Project Planning
REVIT BUILDING INFORMATION MODELING BIM and Project Planning This white paper explores how the Revit building information model (BIM) can be linked with project planning systems to enable 4D construction
Campus Information Modeling at ORNL
Campus Information Modeling at ORNL Damen Belcher, CEM, ASQ SSGB Oak Ridge National Laboratory Facilities Development Division at ORNL ORNL Facilities Development Division Overview CIM Overview Integrated
ECG Engineering Consultants Group S.A., A multi-disciplinary quality E/A Company
ECG Engineering Consultants Group S.A., A multi-disciplinary quality E/A Company Seeks to hire the following positions at Headquarters, Smart Village, Alexandria and Assiut Branches: Architectural and
A. The Commissioning Authority (CxA) has been contracted or will be contracted directly with the Owner for this project.
DIVISION 23 HEATING, VENTILATING, AND AIR CONDITIONING (HVAC) SECTION 23 08 02 PART 1 GENERAL 1.01 AUTHORITY (CxA) A. The Commissioning Authority (CxA) has been contracted or will be contracted directly
MECHANICAL PROJECT PROPOSAL
PSUAE MECHANICAL PROJECT PROPOSAL REDESIGN PROJECT Nicholas B Scheib 2010 M e c h a n i c a l O p t i o n - IP Table of Contents Executive Summary... 2 Project Summary... 3 Existing Mechanical System Summary...
PREPARING A BUINDLING INFORMATION MODEL FOR FACILITY MAINTENANCE AND MANAGEMENT
PREPARING A BUINDLING INFORMATION MODEL FOR FACILITY MAINTENANCE AND MANAGEMENT Anoop Sattenini, Salman Azhar*, and Joseph Thuston McWhorter School of Building Science, Auburn University, Auburn, Alabama,
Certified Instructors & Curriculum
Our Promise. TPM is dedicated to provide the most extensive and high-quality training programs to help you maximize your investment. Although the investment in time and money may seem substantial, it will
AECOsim Building Designer Quick Start Guide
AECOsim Building Designer Quick Start Guide Chapter M01 Mechanical 2012 Bentley Systems, Incorporated www.bentley.com/aecosim Table of Contents Mechanical...3 Mechanical Builidng Designer Features... 3
Using BIM to Streamline Your Energy Modeling Workflows
Using BIM to Streamline Your Energy Modeling Workflows Jeff Olden Glumac MP3765-P The process of building detailed energy models with results that attain the levels of accuracy required by utility incentive
COMPARATIVE LIFE-CYCLE ANALYSIS OF ENERGY-EFFICIENCY MEASURES AT TVA S CHATTANOOGA OFFICE COMPLEX: PHASE II RESULTS & FINAL DESIGN
COMPARATIVE LIFE-CYCLE ANALYSIS OF ENERGY-EFFICIENCY MEASURES AT TVA S CHATTANOOGA OFFICE COMPLEX: PHASE II RESULTS & FINAL DESIGN Umesh Atre Innovative Design Inc 850 W Morgan St Raleigh, NC 27603 [email protected]
A BIM Case Study: SELCEN Mimarlik
A BIM Case Study: SELCEN Mimarlik Final Submission 19 January 2012 Yekta Ipek 523101013 MBL607E::Building Information Models Instructor: Salih Ofluoglu Istanbul 2012 Building Information Models Final Submission
DRAFT BUILDING INFORMATION MODELING SCOPE OF SERVICES AND REQUIREMENTS FOR ARCHITECTS AND ENGINEERS
DRAFT BUILDING INFORMATION MODELING SCOPE OF SERVICES AND REQUIREMENTS FOR ARCHITECTS AND ENGINEERS Table of Contents 1 Introduction...3 1.1. Statement of Purpose...3 1.2. BIM Competence and Responsibilities...3
Taco Hydronic System Solutions Quick Start Guide
QUICK START GUIDE Taco Hydronic System Solutions Quick Start Guide Contents Help Resources...3 Introduction...4 Taco Hydronic System Solutions Work Screen Introduction...5 The basics...6 Getting Started
BIM and Cost Estimating
REVIT BUILDING INFORMATION MODELING BIM and Cost Estimating This white paper explores how the reliable information held within a building information model can be used to support cost estimating. The paper
Santiago Canyon College - Division of Continuing Education 8045 E Chapman Ave., Room U-84, Orange, CA 92869 www.sccollege.edu/oec (714) 628-5922
Santiago Canyon College - Division of Continuing Education 8045 E Chapman Ave., Room U-84, Orange, CA 92869 www.sccollege.edu/oec (714) 628-5922 COURSE Section Room DAY/S TIME VBUS 010, Introduction to
Building Information Modelling (BIM); How it Improves Building Performance. R.P. Kumanayake Lecturer, Department of Civil Engineering
Building Information Modelling (BIM); How it Improves Building Performance R.P. Kumanayake Lecturer, Department of Civil Engineering R.M.P.S. Bandara Lecturer, Department of Mechanical Engineering Faculty
COMMISSIONING OF HVAC SYSTEMS
FORM CL-01 SYSTEMS / EQUIPMENT INCLUDED : SYSTEM STARTUP CHECKLIST I - PRE - STARTUP INSPECTION EQUIPMENT MOUNTING & SETTING CONTROL, INTERLOCK & POWER WIRING ALIGNMENT OF MOTORS & DRIVES PIPING, CONNECTIONS
Residential Duct Systems for New and Retrofit Homes
Residential Duct Systems for New and Retrofit Homes Why it is important to properly design and install high quality, efficient ducted air systems? The efficiency of air distribution systems has been found
Components HVAC General Standards HVAC Guidelines HVAC System Selection Life Cycle Cost Analysis
Components HVAC General System Selection Life Cycle Cost Analysis Outdoor Air Design Values Indoor Air Design Values Outdoor Air Ventilation Welding Ventilation Temperature Control Systems Ductwork HVAC
Top 10 Revit Tools for Project Management & Panel Discussion. Dat Lien, Donald Franklin, Steve Wilkerson Houston Area Revit Users Group April 2012
Top 10 Revit Tools for Project Management & Panel Discussion Dat Lien, Donald Franklin, Steve Wilkerson Houston Area Revit Users Group April 2012 Houston-Area Revit User Group Online Follow HARUG Online!
A Need for Expansion: Mechanical and Electrical Courses
A Need for Expansion: Mechanical and Electrical Courses Daryl L. Orth, Ph. D. and Christian Mains Northern Kentucky University Highland Heights, KY Mechanical and electrical systems are becoming more complicated
reality Revit check Autodesk have long Identify possible Utilize structural Tool Works Building bcg.com
Autodesk Revit reality check for residential construction: Scott Babin Illinois Tool Works, Building Components Group AB6105-V Using Autodesk Revit for architectural and structural design in the residential
Cx for Enhanced Healthcare Project Delivery. Presentation Format. Project features and timeline
Cx for Enhanced Healthcare Project Delivery Rick Staley Sr. Construction Manager PH&S Joe Webb Construction Manager PH&S Richard Beam Director, Energy Management Services PH&S Todd McGuire, PE - Sr. Project
DIVISION 00 - PROCUREMENT AND CONTRACTING REQUIREMENTS
DIVISION 00 - PROCUREMENT AND CONTRACTING REQUIREMENTS NOTICE TO BIDDERS BID FORM INSTRUCTIONS TO BIDDERS CONTRACTOR S BID FOR PUBLIC WORK - FORM 96 MINORITY AND WOMEN S BUSINESS ENTERPRISE PARTICIPATION
UNIVERSITY OF MISSOURI 23 0000 - Heating Ventilating and Air-Conditioning (HVAC) March 2015.01
GENERAL: This section provides general standards for overall sizing and design of Heating, Ventilating, and Air Conditioning (HVAC) systems. Other sections contain specific standards for each system per
HOT & COLD. Basic Thermodynamics and Large Building Heating and Cooling
HOT & COLD Basic Thermodynamics and Large Building Heating and Cooling What is Thermodynamics? It s the study of energy conversion using heat and other forms of energy based on temperature, volume, and
Schematic Design: Quality Management Phase Checklist Project Phase Checklist Series
Best Practices : Project Phase Series Contributed by Micheal J. Lough, AIA, Principal, Integral Consulting The AIA collects and disseminates Best Practices as a service to AIA members without endorsement
Exceptional... Everytime!
Oil & Gas Exceptional... Everytime! Oil & Gas Industry With each Team Leader possessing 10 20 Years experience, BAR Engineering not only contributes high level engineering expertise, but also the practical
Florida Power & Light Company. Business Heating Ventilation & Air Conditioning ( HVAC ) Program Standards. Effective: November 9, 2015
Florida Power & Light Company Business Heating Ventilation & Air Conditioning ( HVAC ) Program Standards Effective: November 9, 2015 Table of Contents Eligibility Requirements - Chiller... 2 Rebate Amount
BIM. Guidelines & Standards for Architects, Engineers, and Contractors. Initiated: Sept. 10th, 2009. Revised: July 1st, 2015
BIM Guidelines & Standards for Architects, Engineers, and Contractors Initiated: Sept. 10th, 2009 Revised: July 1st, 2015 Acknowledgements Indiana University is indebted to those many organizations that
Guide Specification SECTION 23 08 00 - COMMISSIONING OF HVAC PART 1 - GENERAL 1.1 SUMMARY
SECTION 23 08 00 - COMMISSIONING OF HVAC PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. HVAC Commissioning description. 2. HVAC Commissioning responsibilities. 1.2 REFERENCES A. American Society
NYC Department of Education Building Condition Assessment Survey 2014-2015 BROADWAY EDUCATION CAMPUS - MANHATTAN, 26 BROADWAY, MANHATTAN, NY, 10004
School: InspectionId Asset Data Inspection Type Building Assessment Survey 204-205 BROADWAY EDUCATION CAMPUS - MANHATTAN, 26 BROADWAY, MANHATTAN, NY, 0004 Time In Last Edited 255 MECHANICAL 205-05-8 09:00AM
High Altitude HVAC. Silvertip Integrated Engineering Consultants [email protected] www.silvertipconsultants.com
Presentation to: Rocky Mountain ASHRAE 2013 Tech Conference April 19, 2013 High Altitude HVAC Design Considerations by: Michael D. Haughey, PE, HBDP, CEM, LEED TM AP 2013 Silvertip Integrated Engineering
Construction layout and scanning solutions for the MEP contractor
Middle East Construction layout and scanning solutions for the MEP contractor Trimble Field Solutions Trimble Robotic Total Stations and 3D scanners allow you to both layout your MEP services as designed,
PENNSYLVANIA GREEN ENERGY LOAN FUND
PENNSYLVANIA GREEN ENERGY LOAN FUND Procedures Manual for Quantifying Energy Savings A. Introduction A building project applying for a GELF energy loan must demonstrate that it will result in a 25% reduction
1.2 Refrigerant Equipment. General
Part 1 General 1.1 Summary.1 Unless otherwise indicated, follow the standards below when specifying heating, ventilation and air conditioning (HVAC) work. These standards are not intended to restrict or
Building Services Engineering Technician
Building Services Engineering Technician A competent Building Services Engineering Technician is expected to be able to demonstrate the following skills and competences: Systems design in the building
REAL OPERATING COST SAVINGS FROM RETRO- COMMISSIONING OPPORTUNITIES FOR SAVINGS IN ACADEMIC MEDICAL CENTERS
REAL OPERATING COST SAVINGS FROM RETRO- COMMISSIONING OPPORTUNITIES FOR SAVINGS IN ACADEMIC MEDICAL CENTERS Ken L. Hansen P.E. University of Nebraska Medical Center [email protected] 402-559- 5301 402-630-
SOET 352: Advanced REVIT and Building Information Modeling (BIM) Management
STATE UNIVERSITY OF NEW YORK COLLEGE OF TECHNOLOGY CANTON, NEW YORK COURSE OUTLINE SOET 352: Advanced REVIT and Building Information Modeling (BIM) Management Prepared By: Robert F. Burnett CANINO SCHOOL
International Training Institute for the Sheet Metal and Air Conditioning Industry
American Council on Education - National Guide to College Credit for Workforce Training Page 1 of 13 International Training Institute for the Sheet Metal and Air Conditioning Industry The (ITI), formerly
BACK TO PAGE ONE ANALYSIS OF SURVEY DATA
TABLE OF CONTENTS TO-98-7-4 MAIN PAGE Maintenance and Service s of Commercial Building Ground-Source Heat Pump Systems Douglas Cane, P.E. Andrew Morrison, P.E. Christopher J. Ireland Member ASHRAE Associate
Streamline your design-to-cost processes with Autodesk Navisworks
Quantification in Autodesk Navisworks 2015 Streamline your design-to-cost processes with Autodesk Navisworks Contents Overcome data disarray....................................................................................