Ward Bennett Storage Prices effective February 1, 2016 Published January 4, 2016

Transcription

1 Prices effective February 1, 2016 Published January 4, 2016 General Information... 2 How to specify...4 Specification Notes...5 Metal Finishes...6 Stone Options...6 Wood Finishes...7 H Frame Credenzas Sled Base Pedestals and Credenzas Mobile Pedestals and Credenzas Accessories...22 Index...23 Geiger International, Inc Fulton Industrial Blvd., SW Atlanta, GA w w w. g e i g e r i n t l. c o m

2 General Information Terms and Conditions Order Information Application of Standard Terms Changes and Cancellation Packaging and Shipping (continued) Only the standard terms of sale stated in this catalog apply to any transaction unless those terms are modified or supplemented by a written document signed by an officer of Geiger International, Inc. ( Geiger ). Any terms contained in Customer s purchase order, including standard printed provisions, that are additional to or contrary to these terms, are not effective. Use of Furniture and Materials Geiger assumes that textiles, leathers and products are intended for commercial use and are not being bought for use primarily for personal, family, or household purposes. When installed and used as intended, products remain chattel property, are not considered fixtures, and no interest in them should arise under applicable real estate law. Furniture Prices Prices are determined by using the published list prices in effect when Geiger receives Customer s completed purchase order. If Customer s requested ship date is more than three months after Geiger receives Customer s order, it may be repriced using the list prices in effect when products ship. If Customer designates special finishes or options, additional charges may apply. Services such as design, project management, packaging, storage, inside delivery, double handling, installation, or inventory management are not included in Geiger s list prices. COM / COL Procedures If an order includes Customer-supplied materials, Customer must ship those materials to Geiger at Customer s own expense. The materials must be tagged with Geiger s confirmation number, item number, Customer s name, and purchase order number. Geiger is not liable for inadequacies in Customer s materials. Geiger will notify Customer of any apparent defects in Customer s materials before manufacturing. Taxes Customer is responsible for any local sales taxes or other similar taxes imposed on transactions. Delays Geiger is not liable for failure to ship by the acknowledged shipping date or any other date. Geiger is not liable for a delay or failure in shipment or performance if the delay or failure is caused by acts of omission of Customer, its agents, employees, contractors, a governmental authority, or God; delays in transportation; or other similar causes that are not within Geiger s reasonable control. Geiger is excused from further performance of its obligations for the duration of a force majeure cause. Geiger s acceptance of an order is final and binding and an order may not be changed or canceled without Geiger s written consent. Orders placed on any of Geiger s expedited shipment programs and orders of custom-dyed or custom-woven materials may not be changed or canceled. To change or cancel other orders, contact Geiger Customer Care in writing for authorization and applicable charges. Storage If Customer cannot accept delivery when products are ready, it is the customer's responsibility to transfer products to storage and products are invoiced at that time. Customer is responsible for actual storage charges and any other expenses relating to the storage of products or materials. Customer bears all risk of loss for products or materials in storage. Freight Terms For casegoods and seating orders shipped within the 48 contiguous United States, surface freight charges are included. For textile and leather orders actual freight charges will be invoiced. Orders are shipped via ground carrier unless requested otherwise. For orders shipped to Alaska or Hawaii, the freight terms stated above apply only to the port of embarkation. Shipments beyond that point are freight collect. Domestic deliveries are shipped FOB Geiger s plant to a destination designated by Customer by a method Geiger selects. Packaging and Shipping Geiger s casegoods products are shipped in component form. Shipments over $50,000 net are blanket wrapped. Tops and panels are shrink wrapped with cardboard corner protection. Pedestals, storage units, overheads and vertical storage units are wrapped in blankets and shrink wrapped with cardboard corner protection. Blankets are to be returned to Geiger for reuse. If the customer request cartoning on orders over $50,000 net, there will be a charge of five percent of the net order. Packing materials are recyclable. Shipments under $50,000 net are cartoned. Cartoned shipments are packaged with cardboard channels and shrink wrap. Geiger s seating is cartoned in boxes for less than truckload shipments. Full truckload shipments are blanket wrapped. If Customer requests special shipping or delivery methods, Customer is responsible for any extra costs that result. Customer obtains title to products and materials and assumes the risk of loss for them upon shipment from Geiger s plant. Geiger reserves the right to make partial shipments, of truckload quantities, as products are manufactured. Shipping Surcharge A shipping surcharge will be added to all orders under $100,000 based on the ship-to address. The surcharge is a percentage of the total list price of the entire order, calculated on the base price only. Upcharges for veneer, edges, textiles, pulls, etc., are not counted in the calculation. Zone 1 3.0% (GA, NC, SC) Zone 2 3.5% (AL, FL, MS, TN, AR, LA) Zone 3 4.0% (IL, IN, KY, MI, OH, WI, IA, KS, MN, MO, ND, NE, SD, DC, MD, VA) Zone 4 4.5% (CT, MA, ME, NH, RI, VT, DE, NJ, NY, PA, WV) Zone 5 5.0% (OK, TX, AZ, NM, NV, UT, CO) Zone 6 5.5% (OR, WA, ID, MT WY, CA, Canada) International Shipping Orders for export are shipped Ex Works factory (Incoterms 2000). The charge for export packing is five percent of the net order value. There are no export packing charges on shipments to Canada. Claims All blanket wrapped shipments must be unwrapped and inspected at the dock, in the presence of the driver. Claims for "concealed damage" or "subject to inspection" will not be honored on blanket wrapped shipments.all cartoned shipments must be inspected for visual outside damage to the package. Damages and piece count shortages must be noted on the bill of lading. Freight claims must be filed within 30 days (including cartoned shipments with concealed damage). Contact Customer Care for a warranty/freight claim form and send it by fax, mail or to: Geiger International 6095 Fulton Industrial Blvd., SW Atlanta, GA Attention: Warranty Department Fax: Order Information Herman Miller dealers must submit all purchase orders to Geiger via Kiosk. For assistance with this process, please contact Herman Miller Sales Technology Support at All Geiger Gallery and non-herman Miller dealers may submit their orders via or fax at For assistance with this 2 Ward Bennett Storage

3 Order Warranty Information (continued) process, please contact Geiger Customer Care at Midwest NE (except NY) New York South West Int'l Warranty Geiger International, Inc. ( Geiger ), 6095 Fulton Industrial Blvd., SW, Atlanta, GA , USA, warrants the products sold by it to be free from defects in material and workmanship, regardless of the number of shifts during which the products are used, for the warranty periods specified below. This warranty covers the sale of Geiger product in all countries. Not all of the product lines appearing on this list are marketed by Geiger in all countries, and appearance on this list does not imply an offer for sale of a product line in a particular place. Product line availability is defined in current price lists applicable to different regions. Geiger Commercial Office Furniture Products 12 years All products sold under the Geiger brand name, except as limited or described below. Textiles and Leathers 3 years Includes, but is not limited to Edelman Leather, Geiger, Herman Miller, Maharam, and Place fabrics. Nonstandard Products 1 to 5 years Warranty length on nonstandard products not covered by the 12-year warranty is identified on individual product quotes. All Other Products, Parts, and Services 5 years Electronic ballasts used in task lighting 3 years All service parts 6 months All other products, parts, and any services not listed above, sold or furnished by Geiger, except for consumable products such as light bulbs and other electronic products for which no warranty is given Other Manufacturers Products None Geiger will pass through to the original purchaser any warranty supplied by other manufacturers to the extent possible, including, but not limited to, open-line laminates. General Information Warranty Limitations and Disclaimers Design Rights Warranty (continued) (continued) Warranty (continued) (continued) Provisions that apply to all products and services: During the applicable warranty period, Geiger, as its sole obligation, will repair or replace (at its option) any product, part, or component covered by this warranty and sold after the effective date of this warranty, which fails under normal use as a result of a defect in material or workmanship; Geiger will repair or replace the aforementioned product, part, or component with a comparable product, part, or component. This warranty extends only to the original purchasers who acquire new product from Geiger, or its authorized resellers. Any product, part, or component must have been installed, used, and maintained according to Geiger s published instructions in order to be eligible for coverage under this warranty and must not have been subject to misuse or abuse. Any modification to the original product voids the warranty. Geiger does not warrant the performance of the product when used in combination with other than original Geiger product. The warranty period starts from the date of purchase. This document inclusively describes all of the warranties given and remedies available with respect to the company s products and services. Geiger disclaims any other warranty whether express or implied, statutory or otherwise, in relation to the products. Geiger does not warrant: natural variations in wood grain or figure or the presence of character marks changes in surface finishes due to aging or exposure to light marks, scars, or wrinkles occurring naturally in leather veins, marks, voids, fissures, or cracks found naturally in stone In addition, Geiger does not warrant: failure resulting from normal wear and tear the matching of colors, grains, or textures of natural materials the colorfastness or the matching of colors of textiles, including an exact match to cuttings or to swatch cards damage, marking, or staining of veneer surfaces due to contact with rubber or similar compounds; damage from sharp objects or imprinting from writing instruments, or prolonged exposure to direct sunlight Geiger tests Customer s Own Material (COM) and other customer-supplied items for manufacturing quality only and does not provide any warranty with regard to these materials. Geiger does not warrant products that are exposed to extreme environmental conditions or that have been subject to improper storage. Geiger s products meet the requirements of national and specific local codes as stated in the price books and other written publications. TO THE EXTENT ALLOWED BY LAW, ANY IMPLIED WARRANTIES, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE DISCLAIMED AND TO THE EXTENT THEY ARE LEGALLY REQUIRED, ARE LIMITED IN DURATION TO THE DURATION OF THIS WRITTEN WARRANTY. GEIGER SHALL NOT BE LIABLE FOR LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS, OR INCIDENTAL OR CONSEQUENTIAL DAMAGES. Applies in US only: Some states do not allow limitations on how long an implied warranty lasts or do not allow the exclusion or limitation of incidental or consequential damages, so the limitations or exclusions in the two preceding paragraphs may not apply. This warranty gives the purchaser specific legal rights; however, the purchaser may also have other rights that may vary from state to state. Applies outside US: Except as stated above, Geiger will not be liable for any loss or damage (including costs) however caused, whether direct or consequential, incurred or suffered by the purchaser or any third party in respect of the products but nothing contained herein will or will be considered to exclude or restrict any liability on Geiger s part for death or personal injury resulting from negligence. Limitations and Disclaimers Geiger is not liable for loss of time, inconvenience, lost profits, commercial loss, or other special, consequential, or incidental damages for any transaction. Geiger reserves the right to change its designs, its methods of construction, or its prices, charges, or policies at any time without notice to Customer. Design Rights The designs depicted in Geiger s catalogs and price lists are proprietary to Geiger and Geiger reserves the exclusive right to manufacture them. Any reproduction of these designs infringes Geiger s rights and that infringement will be prosecuted. Ward Bennett Storage 3

4 How to Specify How to Specify For each product ordered, specify a product number string. The string should include the product number and all finish and detail codes listed at the bottom of the pricebook page under "Specify". Specify the finishes and details in the same sequence shown on the pricebook page. General Notes All dimensions shown are nominal, and fractional dimensions are rounded to the nearest half inch. Sled Base credenzas and mobile credenzas ship assembled. H Frame credenzas are modular and ship partially assembled. All hardware for assembly is included. String Example: JCH21462C2C2 645 CHR CHR The product number string above includes all codes required for a Ward Bennett H Frame credenza with the following specifications:... JCH C2C2 Wood Finish Port Cherry Metal Finish... CHR Chrome Pulls... CHR Chrome 4 Ward Bennett Storage

5 Specification Notes Credenzas H Frame credenzas include 1/2" thick metal frame gables on the ends and between storage units. Stone and wood tops are 3/4" thick. Credenza storage units have finished backs. Sled Base credenzas include 3" high metal bases on the 3/4" thick credenza end gables. Storage units are 18" wide. Credenza storage units include metal Ward Bennett Flip pulls. H Frame credenza product numbers include a suffix which indicates the storage configuration. Individual storage codes are as follows: C1...open C2...2 doors CF...2 file drawers CG...2 pencil drawers above 4 box drawers CH...1 file drawer CK...3 box drawers C1 C2 CF Drawers include wood drawer boxes and self-closing hidden drawer slides. One pencil tray is included in the top box drawer of all pedestals with box drawers. Tray is covered in black felt. Hanging file frames are included in all pedestals and credenzas with file drawers. Sled base and mobile credenzas accommodate letter or legal files. H Frame credenzas accommodate letter files only. CG CH CK Sled Base credenza product numbers include a suffix which indicates the storage configuration. Individual storage codes are as follows: B2L...1 door, hinge left B2R...1 door, hinge right B3...4 box drawers B4...2 box, 1 file drawer Locks are not available on credenzas. B2L B2R B3 B4 Ward Bennett Storage 5

6 Metal Finishes Stone Ward Bennett Storage Metal Finishes Stone Metal Finishes Standard Metal Finishes For credenza frames, pedestal bases, and pulls BNZ...Bronze CHR...Chrome SAC...Satin Chrome Stone Standard Stone Finishes For credenzas Perlato Polished Marble Verde Antique Polished Marble Black Polished Granite Autumn Brown Polished Granite White Carrara Polished Marble 5U...Georgia Grey Polished Marble DP...Georgia White Polished Marble HR...Wisconsin Black Honed Marble Notes Stone is 3/4" thick. 6 Ward Bennett Storage

7 Wood Finishes Ward Bennett Storage Wood Finishes Wood Finishes Premium Wood Finishes (no upcharge) Low Sheen Finishes Champagne Maple Champagne Beech Sundance Cherry Caramel Cherry Henna Cherry Port Cherry Cocoa Cherry Henna Sapele Port Sapele Cocoa Sapele Espresso Sapele Caramel Walnut Henna Walnut Port Walnut Cocoa Walnut Champagne Hickory Champagne Ash Ebony Ash 2U...Light Brown Walnut (HMI) 40...Darl Brown Walnut (HMI) ED...Aged Cherry (HMI) EK...Medium Red Walnut (HMI) UL...Natural Maple (HMI) UX...Walnut on Cherry (HMI) Matte Finishes 6A1...White Ash 6A2...Platinum Ash 6K1...Rift Oak 6K6...Burnt Oak OUG...Natural Walnut Anigre Wood Finishes (add 20% upcharge) Low Sheen Finishes Champagne Anigre Sundance Anigre Caramel Anigre Henna Anigre Notes Geiger beech, cherry, hickory, maple and walnut wood veneers are flat-cut and book matched. Anigre, and sapele veneers are quarter-cut and slip matched. Oak veneers are rift cut and slip matched. Champagne ash and ebony ash veneers are flat-cut and book matched. Platinum ash and white ash are quarter-cut and slip matched. Special finish colors may be developed for orders over $200,000 list upon request at no additional charge. A set-up fee of $250 will be charged on orders under $200,000 list for each special finish. In order to protect the quality and durability of Geiger's finish, the chemical composition of the staining materials, water-base sealers, and urethane top coats will not be altered for special finishes. Exotic veneers such as pearwood, bird's eye maple and sycamore are available upon request, at additional cost. For further information and procedures for special finishes or exotic veneers, contact your Geiger sales representative. Ward Bennett Storage 7

8 Ward Bennett Storage Credenzas H Frame Ward Bennett Storage Credenzas H Frame open shelf JCH C /2 $2, and shelf JCH1S-1431-C /2 $3,299 two doors JCH C /2 $3,507 +1,052 three box drawers JCH CK /2 $4,350 +1,305 Specify J C H C Wood* Stone** Metal (pull and frame) *Not required on credenzas **Not required on credenzas without stone top 8 Ward Bennett Storage

9 Credenzas H Frame six box drawers JCH CG /2 $5,156 +1,547 one file drawer JCH CH /2 $3,642 +1,093 two 15" file drawers JCH CF /2 $3,727 +1,118 J C H C Six box credenzas (CG units) include pencil trays and felt lining in bottom of top two box drawers. Wood Metal (pull and frame) Ward Bennett Storage 9

10 Credenzas H Frame two 30" storage JCH C1C /2 26 1/2 $4,302 +1,291 and shelf JCH2S-1462-C1C /2 26 1/2 $6,011 two 30" storage JCH C2C /2 26 1/2 $4,778 +1,433 two 30" storage JCH C2C /2 26 1/2 $6,428 +1,928 two 30" storage JCH CKC /2 26 1/2 $7,269 +2,181 two 30" storage JCH C2CG /2 26 1/2 $8,076 +2,423 Specify J C H C C Wood Stone* Metal (pull and frame) Six box credenzas (CG units) include pencil trays and felt lining in bottom of top two box drawers. *Not required on credenzas without stone top 10 Ward Bennett Storage

11 Credenzas H Frame two 30" storage JCH CKCF /2 26 1/2 $7,490 +2,247 two 30" storage JCH CFCG /2 26 1/2 $8,296 +2,489 two 30" storage JCH CHCH /2 26 1/2 $6,695 +2,009 two 30" storage JCH CFCF /2 26 1/29 $6,866 +2,060 J C H C C Six box credenzas (CG units) include pencil trays and felt lining in bottom of top two box drawers. Wood Metal (pull and frame) Ward Bennett Storage 11

12 Credenzas H Frame three 30" storage JCH C1C1C /2 $6,157 +1,847 and shelf JCH3S-1492-C1C1C /2 $8,722 three 30" storage JCH C1C2C /2 $8,283 +2,485 three 30" storage JCH C2C2C /2 $9,345 +2,804 three 30" storage JCH C1CGC /2 $9,933 +2,980 Specify J C H C C C Wood Stone* Metal (pull and frame) Six box credenzas (CG units) include pencil trays and felt lining in bottom of top two box drawers. *Not required on credenzas without stone top 12 Ward Bennett Storage

13 Credenzas H Frame three 30" storage JCH C1CFC /2 $8,504 +2,551 three 30" storage JCH CHCHCH /2 $9,749 +2,925 three 30" storage JCH CFCFCF /2 $10,005 +3,002 J C H C C C Wood Metal (pull and frame) Ward Bennett Storage 13

14 Credenzas H Frame four 30" storage JCH C1C1C1C /2 26 1/2 $8,015 +2,405 and shelf JCH4S C1C1C1C /2 26 1/2 $11,437 four 30" storage JCH C1C1C2C /2 26 1/2 $10,141 +3,042 four 30" storage JCH C2C2C2C /2 26 1/2 $12,265 +3,680 Specify J C H C C C C Wood Stone* Metal (pull and frame) *Not required on credenzas without stone top 14 Ward Bennett Storage

15 Credenzas H Frame four 30" storage JCH C1C1CGC /2 26 1/2 $11,789 +3,537 four 30" storage JCH C1CGCFC /2 26 1/2 $13,072 +3,922 four 30" storage JCH CHCHCHCH /2 26 1/2 $12,804 +3,841 four 30" storage JCH CFCFCFCF /2 26 1/2 $13,146 +3,944 J C H C C C C Six box credenzas (CG units) include pencil trays and felt lining in bottom of top two box drawers. Wood Metal (pull and frame) Ward Bennett Storage 15

16 Pedestals Sled Base Ward Bennett Storage Pedestals Sled Base Pedestal Sled Base one door, hinge on left JCS B2L 18 1/2 19 1/2 26 5/8 $3, JCS1S-1920-B2L 18 1/2 19 1/2 26 5/8 $4,150 +1,245 Pedestal Sled Base one door, hinge on right JCS B2R 18 1/2 19 1/2 26 5/8 JCS1S-1920-B2R 18 1/2 19 1/2 26 5/8 $3, $4,150 +1,245 Pedestal Sled Base four box drawers JCS B3 18 1/2 19 1/2 26 5/8 JCS1S-1920-B3 18 1/2 19 1/2 26 5/8 $4,188 +1,256 $5,144 +1,543 Pedestal Sled Base two box, one file drawer JCS B4 18 1/2 19 1/2 26 5/8 JCS1S-1920-B4 18 1/2 19 1/2 26 5/8 $3,807 +1,142 $4,764 +1,429 Specify J C S B Wood Stone* Metal (pull and base) *Not required on pedestals without stone top 16 Ward Bennett Storage

17 Pedestals Sled Base two 18" pedestals JCS B2B2 18 1/2 37 1/2 26 5/8 JCS2S-1938-B2B2 18 1/2 37 1/2 26 5/8 $5,119 +1,536 $7,035 +2,111 two 18" pedestals JCS B3B2 18 1/2 37 1/2 26 5/8 JCS2S-1938-B3B2 18 1/2 37 1/2 26 5/8 $6,114 +1,834 $8,029 +2,409 two 18" pedestals JCS B3B4 18 1/2 37 1/2 26 5/8 JCS2S-1938-B3B4 18 1/2 37 1/2 26 5/8 $6,728 +2,018 $8,643 +2,593 two 18" pedestals JCS B4B2 18 1/2 37 1/2 26 5/8 JCS2S-1938-B4B2 18 1/2 37 1/2 26 5/8 $5,734 +1,720 $7,649 +2,295 two 18" pedestals JCS B4B4 18 1/2 37 1/2 26 5/8 JCS2S-1938-B4B4 18 1/2 37 1/2 26 5/8 $6,347 +1,904 $8,264 +2,479 J C S B B Wood Stone* Metal (pull and base) *Not required on credenzas without stone top Ward Bennett Storage 17

18 Pedestals Sled Base three 18" pedestals JCS B2B2B2 18 1/2 55 1/2 26 5/8 $7,096 +2,129 JCS3S-1956-B2B2B2 18 1/2 55 1/2 26 5/8 $9,491 +2,847 three 18" pedestals JCS B2B2B4 18 1/2 55 1/2 26 5/8 JCS3S-1956-B2B2B4 18 1/2 55 1/2 26 5/8 $7,711 +2,313 $10,105 +3,032 three 18" pedestals JCS B2B3B4 18 1/2 55 1/2 26 5/8 JCS3S-1956-B2B3B4 18 1/2 55 1/2 26 5/8 $8,705 +2,612 $11,099 +3,330 three 18" pedestals JCS B2B4B4 18 1/2 55 1/2 26 5/8 JCS3S-1956-B2B4B4 18 1/2 55 1/2 26 5/8 $8,324 +2,497 $10,719 +3,216 three 18" pedestals JCS B4B4B4 18 1/2 55 1/2 26 5/8 JCS3S-1956-B4B4B4 18 1/2 55 1/2 26 5/8 $8,938 +2,681 $11,332 +3,400 Specify J C S B B B Wood Stone* Metal (pull and base) *Not required on credenzas without stone top 18 Ward Bennett Storage

19 Pedestals Sled Base four 18" pedestals JCS B2B2B2B2 18 1/2 73 1/2 26 5/8 JCS4S-1974-B2B2B2B2 18 1/2 73 1/2 26 5/8 $9,061 +2,718 $12,414 +3,724 four 18" pedestals JCS B2B2B3B4 18 1/2 73 1/2 26 5/8 JCS4S-1974-B2B2B3B4 18 1/2 73 1/2 26 5/8 $10,669 +3,201 $14,021 +4,206 four 18" pedestals JCS B2B2B4B4 18 1/2 73 1/2 26 5/8 JCS4S-1974-B2B2B4B4 18 1/2 73 1/2 26 5/8 $10,289 +3,087 $13,641 +4,092 four 18" pedestals JCS B4B4B4B4 18 1/2 73 1/2 26 5/8 JCS4S-1974-B4B4B4B4 18 1/2 73 1/2 26 5/8 $11,517 +3,455 $14,869 +4,461 J C S B B B B Wood Stone* Metal (pull and base) *Not required on credenzas without stone top Ward Bennett Storage 19

20 Pedestals Mobile Ward Bennett Storage Pedestals Mobile Pedestal Mobile one door, hinge on left JMS B2L 18 1/2 19 1/2 26 5/8 $2, JMS1S-1920-B2L 18 1/2 19 1/2 26 5/8 $3,905 +1,172 Pedestal Mobile one door, hinge on right JMS B2R 18 1/2 19 1/2 26 5/8 JMS1S-1920-B2R 18 1/2 19 1/2 26 5/8 $2, $3,905 +1,172 Pedestal Mobile four box drawers JMS B3 18 1/2 19 1/2 26 5/8 JMS1S-1920-B3 18 1/2 19 1/2 26 5/8 $3,941 +1,182 $4,898 +1,469 Pedestal Mobile two box, one file drawer JMS B4 18 1/2 19 1/2 26 5/8 JMS1S-1920-B4 18 1/2 19 1/2 26 5/8 $3,561 +1,068 $4,519 +1,356 Specify J M S B Wood Stone* Metal (pull) *Not required on pedestals without stone top 20 Ward Bennett Storage

21 Credenzas Mobile Ward Bennett Storage Credenzas Mobile Credenza Mobile two 18" pedestals JMS B2B2 18 1/2 37 1/2 26 5/8 JMS2S-1938-B2B2 18 1/2 37 1/2 26 5/8 $4,935 +1,481 $6,851 +2,055 Credenza Mobile two 18" pedestals JMS B3B2 18 1/2 37 1/2 26 5/8 JMS2S-1938-B3B2 18 1/2 37 1/2 26 5/8 $5,930 +1,779 $7,845 +2,354 Credenza Mobile two 18" pedestals JMS B2B4 18 1/2 37 1/2 26 5/8 JMS2S-1938-B2B4 18 1/2 37 1/2 26 5/8 $5,550 +1,665 $7,465 +2,240 Credenza Mobile two 18" pedestals JMS B3B4 18 1/2 37 1/2 26 5/8 JMS2S-1938-B3B4 18 1/2 37 1/2 26 5/8 $6,545 +1,964 $8,459 +2,538 J M S B B Wood Stone* Metal (pull) *Not required on credenzas without stone top Ward Bennett Storage 21

22 Accessories Ward Bennett Storage Accessories Silverware Drawer Insert for use in top box drawer (shown in sled base credenza) for use with H Frame credenza JAH /8 1 1/2 $368 for use with Sled Base or mobile credenza JAS / /2 $368 Silverware inserts are natural oak and designed for use in top box drawer. Bottom of top box drawer is covered in black felt. plan view of box drawer with silverware insert Specify J A Wood O K R 22 Ward Bennett Storage

23 Ward Bennett Storage Index by Page Page Page Page JAH JAS JCH C JCH C JCH CF... 9 JCH CG... 9 JCH CH... 9 JCH CK... 8 JCH1S-1431-C JCH C1C JCH C2C JCH C2C JCH C2CG JCH CFCF JCH CFCG JCH CHCH JCH CKC JCH CKCF JCH C1C1C JCH C1C2C JCH C1CFC JCH C1CGC JCH C2C2C JCH CFCFCF JCH CHCHCH JCH3S-1492-C1C1C JCH C1C1C1C JCH C1C1C2C JCH C1C1CGC JCH C1CGCFC JCH C2C2C2C JCH CFCFCFCF JCH CHCHCHCH.. 15 JCH4S C1C1C1C JCS B2L JCS B2R JCS B JCS B JCS1S-1920-B2L JCS1S-1920-B2R JCS1S-1920-B JCS1S-1920-B JCS B2B JCS B3B JCS B3B JCS B4B JCS B4B JCS2S-1938-B2B JCS2S-1938-B3B JCS2S-1938-B3B JCS2S-1938-B4B JCS2S-1938-B4B JCS B2B2B JCS B2B2B JCS B2B3B JCS B2B4B JCS B4B4B JCS3S-1956-B2B2B JCS3S-1956-B2B2B JCS3S-1956-B2B3B JCS3S-1956-B2B4B JCS3S-1956-B4B4B JCS B2B2B2B JCS B2B2B3B JCS B2B2B4B JCS B4B4B4B JCS4S-1974-B2B2B2B JCS4S-1974-B2B2B3B JCS4S-1974-B2B2B4B JCS4S-1974-B4B4B4B JMS B2L JMS B2R JMS B JMS B JMS1S-1920-B2L JMS1S-1920-B2R JMS1S-1920-B JMS1S-1920-B JMS B2B JMS B2B JMS B3B JMS B3B JMS2S-1938-B2B JMS2S-1938-B2B JMS2S-1938-B3B JMS2S-1938-B3B Ward Bennett Storage 23

24 2016 Geiger International, Inc. All rights reserved. Geiger International is a registered trademark of Geiger International, Inc. The Geiger logo, H Frame, and Sled Base are trademarks of Geiger International, Inc., and/or of its independent designers. 24 Ward Bennett Storage