List 9a Approved Manufacturers of Chain Cable for Ships and Offshore Mooring

Transcription

1 This list identifies works approved by Lloyd s Register Group Limited (LR) for the manufacture of chain cable for ships and offshore mooring in accordance with the requirements of LR's Rules for the Manufacture, Testing and Certification of Materials, Chapter 10. The information listed for each works is a summary of the product, grade and maximum nominal diameter approved. Where required further information should be obtained from the current certificate of approval issued to the manufacturer by LR. Works designated "MQS Approved" are also approved under the Materials Quality Scheme in accordance with LR's Rules for the Manufacture, Testing and Certification of Materials, Chapter 1 Section 2. Approval only covers the manufacturing location listed, it does not extend to other works owned by the same company. The local LR surveying office is also listed. Lloyd's Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.

2 China, People's Republic of ASIAN STAR (ZHENJIANG) MOORING CHAIN CO., LTD. 8# nanwei 4th Road Dingmao New Area Zhejiang, Jiangu Tel: Fax: Web: Chain Cable Grade U3a is supplied in quench & tempered condition Nanjing Certificate No.: MD00/4305/0002/9a Expiry Date: 09/12/2016 Approved for maximum diameter 122mm U3a common link Approval for Mooring grade with the bars supplied by Jiangyin Xingcheng Special Steel Works Co. Ltd. Approved for maximum diameter 183mm common link ASIAN STAR ANCHOR CHAIN ( MAANSHAN) CO., LTD. No.73 Taiping Street Caishi, Maanshan Anhui Province PC: Tel: Fax: XSK@MASYXML.com.cn Web: Certificate Number: MD00/0964/0007/9a Expiry: 16/10/2016 "ENHANCED SURVEY" U1, U2(a) Nanjing FOSHAN MARINE ANCHOR CHAIN LTD. (FMAC) No. 68 Jin Gang Road Jin Ben Town San Shui District, Foshan City Guang Dong Province Tel: / 8017 Fax: seaflower@fmac.com.cn Web: Chain cable Grade U3a is supplied in the quenched and tempered condition. Approval for Stud link and Studless to 127.0mm diameter is restricted to manufacture with bars supplied by Jiangyin Xingcheng Special Steel Works, Co., Ltd. and Daye Special Steel Co., Ltd. Method of manufacturing of single substitute links approved for grade 127mm diameter common link made by the bars supplied by Daye Special Steel Co., Ltd. Guangzhou Certificate Number: MD00/3459/0007/9a Expiry: 12/02/2017 JIANGSU AOHAI MARINE FITTINGS CO., LTD. Wuwei Village Jiangyin-Jingjiang Industrial Zone Jiangsu Province Tel: Fax: to: yangyin0808@126.com Web Jiangyin Scope of approval includes manufacture of End Links (maximum 146mm diameter) and Enlarged Links (maximum 137mm diameter) in Grade Certificate No.: MD00/4236/0001/9a Expiry Date: 14/10/2016 JIANGSU ASIAN STAR ANCHOR CHAIN Co., Ltd Dongxing Town, Jingjiang U1, U2(a), Jiangyin S, S, Tel: Fax: mailto:taojj@pub.tz.jsinfo.net Web: Certificate Number: MD00/1974/00013/9a Expiry: 22/07/2017 LAIWU STEEL GROUP ZIBO ANCHOR CHAIN CO., LTD. Heiwang Town Zichuan District Zibo City Shandong Province Tel: +86 (0) Fax: +86 (0) lgchains@ net Web: Approval is for U1 & U2 supplied in the normalized condition and Grade U3 supplied in the quenched & tempered condition. Certificate Number: MD00/2135/0007/9a Expiry: 22/08/ U1, U2(a), LAIWU STEEL GROUP ZIBO ANCHOR CHAIN CO., LTD

3 Branch No. 269, Yanhe Road, Economic & Technical Development Zone,, Shandong Province, , Tel: Fax: Web: Approval for, and Stud link and Studless to 111.0mm diameter is restricted to manufacture with 114.0mm diameter bar supplied by Jiangyin Xingcheng Special Steel Works, Co., Ltd., bar to specification 0Mn2, bar to specification 28MnCrMo, bar to specification 22MnCrNiMo. Scope of approval includes for the manufacture by flash butt welding as part of individual chain manufacture for End Links (maximum 146mm diameter) and Enlarged Links (maximum 134mm diameter) for the required increased diameter as applicable to the chain common link diameter. For mooring grade chain cable this is additional subject to these links being manufactured with the same specification bar stock from the same supplier. Ships stud link flash butt weld chain cable grade and mooring grades, and are supplied in the quenched & tempered condition. Certificate Number: MD00/3779/0003/9a Expiry:19/04/2016 "ENHANCED SURVEY" QINGDAO ANCHOR CHAIN CO., LTD. 106 Aolan Road Jimo, Tel: +86 (0) Fax: +86 (0) Web U1, U2(a), , Approval is for grades U1 and U2 are supplied in the normalised condition; grade U3 supplied in the quenched and tempered condition. Certificate Number: MD00/1226/0007/9a Expiry: 31/10/ QINGDAO ANCHOR CHAIN CO., LTD. No. 1 Branch 6 Lingshan Road, Lingshan Town Jimo, Shangdong Province Tel: +86 (0) Fax: +86 (0) qac@public.qd.sd.cn Web Certificate Number: MD00/4466/0001/9a Expiry: 11/04/2018 U2(a),,, ZHEJIANG SHUANGNIAO ANCHOR CHAIN CO., LTD U2(a) Sanwang Industrial Park, Huangze Town, Shengzhou City, Zhejiang Province Tel: +86 (0) Fax: +86 (0) zjsnac@163.com Web: Grade U2 supplied in normalized condition, Grade U3 supplied in the quenched and tempered condition. Chains in Grade U3 over 76mm diameter require sub-contracted break load testing. Scope of approval includes for the manufacture by flash butt welding as part of individual chain manufacture for End Links (maximum 91mm diameter) and Enlarged Links (maximum 84mm diameter) for the required increased diameter as applicable to the chain common link diameter to a maximum of 76mm. Certificate Number: MD/00/3757/0003/9a Expiry: 13/03/2016 Zhoushan ZHENGMAO GROUP CO., LTD. U1, U2(a) Nanjing , API-2F , , Wufeng Kou Zhenjiang Jiangsu Province PC Tel: Fax: wangxt151@163.com Web: Scope of approval includes for the manufacture by flash butt welding as part of individual Studlink and Studless mooring chain manufacture in Grade for End Links (maximum 182mm diameter) and Enlarged Links (maximum 167mm diameter) for the required increased diameter as applicable to the chain common link diameter to a maximum of 152mm. API-2F manufactured under API Licence No. 2F Approval for mooring grade to 105mm diameter is with bars supplied by Jiangyin Xingcheng Special Steel Works Co. Ltd to specification 0Mn2. Approval for mooring grade s to 152mm diameter (increased to 182mm diameter for end links and enlarged links) is with bars supplied by Jiangyin Xingcheng Special Steel Works Co. Ltd to specification 28MnCrMo. Approval for Mooring grade to 105mm diameter is with bars supplied by Jiangyin Xingcheng Special Steel Works Co. Ltd to specification 22CrMnNiMo. Approval for mooring grade to 152mm diameter is with bars supplied by Daye Special Steel Co. Ltd to specification 27CrMnMo. U1 and U2 are supplied in the normalised condition; U3, and API-2F are supplied in the quenched an tempered condition. Certificate Number: MD00/1716/0009/9a Expiry: 14/05/2016 ZHOUSHAN ZHONGNAN ANCHOR CHAIN CO LTD., U2(a) Zhoushan 3

4 Pingyangpu Putuo, Zhoushan City, Zhejiang Province, Tel No Fax Web: Certificate Number: MD00/4035/0002/9a Expiry: 26/06/2018 "ENHANCED SURVEY" France CARLIER CHAINES S.A.S. 37 Rue Salengro BP Saint Amand Les Eaux Cedex Tel: Fax: Certificate #: MD00/0288/0007/9a Expiry date: 21/01/ mailto:info@carlier-chain.com Web page U1, U2(a), Lyon MARIT & DAVAINE CHAÎNES 230 avenue Desandrouins F Valenciennes Tel Fax guy@marit.fr web: U1, U2(a), Lyon Certificate #: MD00/0994/0008/9a Expiry date: 28/08/2017 Germany HÖNNETALER KETTENFABRIK SCHULTE & Co. Bundesstraße 30 D Sundern-Hövel Tel: +49 (0) Fax: +49 (0) info@hoennetal-ketten.de web: U1, U2(a), Hamburg Certificate No. MD00/2583/0006/9a Expiry date: 11/09/2017 KETTENFABRIK MESTER GmbH Bornstraße 280 D Dortmund Tel +49 (0) Fax +49 (0) info@mesterkette.com Web: U1, U2(a), Hamburg Certificate No. MD00/0841/0008/9a Expiry date: 03/04/2017 Mooring chain cable grade API-2F may be accepted up to 105 mm nominal diameter for approved applications. THIELE GmbH & CO. KG Iserlohn-Kalthof Werkstr. 3 D Iserlohn Tel: +49 (0) Fax: +49 (0) Mobile: mailto:j.schwartz@thiele.de Web: Certificate #: MD00/1513/0008/9a Expiry date: 02/07/2018 U1, U2(a) Hamburg India INDIAN CHAIN PRIVATE LTD. 238-B, A.J.C. Bose Road KOLKATA Tel: Fax: M mailto:info@indianchain.com Web: Certificate No. MD00/0757/0007/9a Expiry date: 01/01/2017 U1, U2(a) Kolkata 4

5 Japan HAMANAKA CHAIN MFG. CO., LTD. Himeji Factory 810-1, Oeshima Aboshi-ku Himeji-city Hyogo-pref. U1, U2(a), API-2F Tel: Fax: Web: Bar materials for mooring grades, and are restricted to supply by Nippon Steel & Sumitomo Corporation - Muroran Works to internal specifications HTCC70B (), HTC80M () and HTC100B (). U1 and U2 are supplied in the normalised condition; grades API 2F,, and are supplied in the quenched and tempered condition. Method of Stud Fixing- U1, U2 and U3; two point welding, four point welding or proof loading to a maximum 130% of nominal proof load. and ; two point welding or proof loading to a maximum 125% of nominal proof load Grade ; Proof loading to a maximum 112.5% of nominal proof load API-2F manufactured under API Licence No. 2F-0004 Method of manufacture of single substitute links approved for all grades and sizes Certificate No. MD00/0642/0007/9a Expiry date: 18/05/ NIPPON CHAIN & ANCHOR Co., Ltd. Hiro Factory Hiro-Shiratake Kure City Hiroshima Pref. P.C Tel. +81 (0) Fax +81 (0) m.kashiki@kotobukikogyo.co.jp Certificate No. MD00/1082/0008/8 Expiry date: 23/11/2017 SUMITOMO HEAVY INDUSTRIES HIMATEX CO LTD., ISOURA WORK 16-4 Isoura-cho Niihama-shi Ehime-pref Tel: Fax: mailto:ykm_kuwano@shuff.shi.co.jp website: Certificate No. MD00/0793/0008/9a Expiry date: 22/04/2016 U1, U2(a), U1, U2(a), TOA CHAIN MANUFACTURING CO., LTD. Otsu-362 Shirahama-cho Himeji-city Hyogo-pref. Tel: +81 (0) Fax: +81 (0) mailto: furuchan@toachain.co.jp Certificate No. MD00/1532/0007/9a Expiry date: 07/08/2017 U1, U2(a), Korea DAI HAN ANCHOR CHAIN MFG.CO., LTD. #740, Dohwa-Dong Nam-Gu Inchon U1, U2(a), Seoul R5 S, API-2F Tel: Fax: mailto:daihan@dhac.co.kr Web: API-2F manufactured under API Licence No. 2F-0003 Certificate No. MD00/0371/0012/9a Expiry date: 29/01/2016 R5 S

6 Spain VICINAY CADENAS S.A. Deusto Factory C/Particular de Sagarduy, 5 P.O. Box BILBAO (VIZCAYA) Tel: Fax: mailto:mbergua@vicinaycadenas.com API-2F manufactured under API Licence No. 2F-0005 U1, U2(a), Bilbao R5, S, API-2F, R5, S Web: The approval for the and R5 are restricted to chain cable made from bars from specific suppliers and processing routes as detailed on Appendix 2 and Appendix 3 of the certificate. Method of manufacturing and individual heat treatment of single substitute links approved for grade 175mm diameter common link made by the bars supplied by Gerdau Aceros Especiales S.L Certificate Number: MD00/1633/0019/9a Expiry: 15/04/2018 VICINAY SESTAO, S.L. Avenida de Altos Hornos de Vizcaya, Sestao, Vizcaya, Tel: Fax: dhernandez@vicinaycadenas.com, R5, S Bilbao Certificate No: MD00/4470/0001/9a Expiry date: Single substitute (splice) links approved for grade up to 159mm nominal diameter. The approval for the grades, S and R5 are restricted to bars sourced from specific suppliers and manufacturing routes, as detailed in Appendices 2 to 4 of the certificate. Sweden RAMNÄS BRUK AB P.O Box 14 S Ramnäs Tel: Fax: info@ramnas.com Web Certificate No. MD00/1230/0009/9a Expiry date: 23/05/2017 U1, U2(a), Gothenburg, API-2F United Kingdom THE SOLID SWIVEL CO., LTD. Portersfield Road Cradley Heath West Midlands B64 7BL Tel: Fax: mailto:graham@solidswivel.co.uk Web: U1, U2(a), Liverpool Grade U2 chain cable is supplied in the normalised condition and the grade U3 chain cable is supplied in the quenched and tempered condition. The scope of approval included for the manufacture of U2 grade end (open) links up to 60mm nominal diameter produced by flash butt welding as part of the chain cable manufacture. The scope of approval includes for the supply of flash butt welded stud link chain cable in Aluminium Silicon Bronze to Grade 2 of NES 171 (Def Stan ) up to 26mm maximum diameter accepted for approved applications. The scope of approval included for the manufacture of in Aluminium Silicon Bronze to Grade 2 of NES 171 (Def Stan ) of end (open) links up to 35mm nominal diameter produced by flash butt welding as part of the chain cable manufacture accepted for approved applications. Certificate Number: MD00/3028/0003/9a Expiry: 24/11/2015 6

7 Lloyd's Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as Lloyd's Register. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.