Connector and Cable Diagrams (Pinout Charts)
|
|
|
- Clifton Greer
- 8 years ago
- Views:
Transcription
1 Connector and Cable Diagrams (Pinout Charts) These pinout charts provide wire color and connector pin numbers for Crossover Cable Pinouts Circuit Pack and Auxiliary Equipment Leads (Pinout Charts), includes 2- and 4-wire analog and digital lines, 8, 16, and 24 ports; hybrid line; AUX and CO trunk. Circuit Pack and Auxiliary Equipment Leads (Pinout Charts), includes 3-wire CO trunk, DID/DIOD trunk, tie and DS1 tie trunk, 2- and 4-wire ISDN-BRI lines, packet data line, and 4-port DIOD. Lead and Color Designations TN2185B ISDN-BRI 4-wire S Interface TN2198 ISDN-BRI 2-wire U Interface TN793B 24-Port Analog Line circuit pack DS1 Interface Cable Pinouts Port Circuit Pack and Telephone Pin Designations Auxiliary Lead Appearances at AUX Connector (MCC1 and SCC1 media gateways only) External Alarm Connector Pinout External Alarm Connector Pinout Emergency Transfer Panel to MDF Pinouts for 25-pair Connector TN799DP C-LAN Pinouts Pinouts for the Ethernet adapter for TN799DP C-LAN, TN2302AP IP Media Processor, and TN2501AP VAL TN2312AP IP Server Interface Adapter Pinouts Issue 3 1
2 Crossover Cable Pinouts An Ethernet CAT5 cable that is used to directly connect a laptop to the Avaya S8700 Media Server's services port must have the following pinouts: Pin to media server s services Ethernet port Pin to laptop s Ethernet card 2 Issue 3
3 Circuit Pack and Auxiliary Equipment Leads (Pinout Charts) Color Connector Pin Nos Analog Line (8) Digital Line & Analog Line (16) 2-wire Data Line & Digital Line 4-wire Digital Line & Analog Line (24) 2-wire Hybrid Line MET Line AUX Trunk W-BL 26 T1 T1 T1 V1T1 T1 T1 T1 BL-W 01 R1 R1 R1 V1R1 R1 R1 R1 W-O 27 T2 TXT1 T2 CT1 TXT1 SZ1 O-W 02 R2 TXR1 R2 CR1 TXR1 SZ11 W-G 28 T3 PXT1 T3 P-1 PXT1 S1 G-W 03 R3 PXR1 R3 P+1 PXR1 S11 W-BR 29 T2 T4 T4 V1T2 T2 T2 T2 BR-W 04 R2 R4 R4 V1R2 R2 R2 R2 W-S 30 TXT2 T5 CT2 TXT2 SZ2 S-W 05 TXR2 R5 CR2 TXR2 SZ12 R-BL 31 PXT2 T6 P-2 PXT2 S2 BL-R 06 PXR2 R6 P+2 PXR2 S12 R-O 32 T3 T7 V1T3 T3 T3 T3 O-R 07 R3 R7 V1R3 R3 R3 R3 R-G 33 TXT3 T8 CT3 TXT3 SZ3 G-R 08 TXR3 R8 CR3 TXR3 SZ13 R-BR 34 T5 PXT3 T9 P-3 PXT3 S3 BR-R 09 R5 PXR3 R9 P+3 PXR3 S13 R-S 35 T4 T6 T10 V1T4 T4 T4 T4 S-R 10 R4 R6 R10 V1R4 R4 R4 R4 BK-BL 36 T7 TXT4 T11 CT4 TXT4 SZ4 BL-BK 11 R7 TXR4 R11 CR4 TXR4 SZ14 BK-O 37 T8 PXT4 T12 P-4 PXT4 S4 O-BK 12 R8 PXR4 R12 P+4 PXR4 S14 BK-G 38 T5 T9 T13 V1T5 T5 G-BK 13 R5 R9 R13 V1R5 R5 CO Trunk Issue 3 3
4 Color BK-BR 39 T10 TXT5 T14 CT4 BR-BK 14 R10 TXR5 R14 CR4 BK-S 40 T11 PXT5 T15 P-5 S-BK 15 R11 PXR5 R15 P+5 Y-BL 41 T6 T12 T16 V1T6 T6 BL-Y 16 R6 R12 R16 V1R6 R6 Y-O 42 TXT6 T17 CT6 O-Y 17 TXR6 R17 CR6 Y-G 43 PXT6 T18 P-6 G-Y 18 PXR6 R18 P+6 Y-BR 44 T7 T19 V1T7 T7 BR-Y 19 R7 R19 V1R7 R7 Y-S 45 TXT7 T20 CT7 S-Y 20 TXR7 R20 CR7 V-BL 46 T13 PXT7 T21 P-7 BL-V 21 R13 PXR7 R21 P+7 V-O 47 T8 T14 T22 V1T8 T8 O-V 22 R8 R14 R22 V1R8 R8 V-G 48 T15 TXT8 T23 CT8 G-V 23 R15 TXR8 R23 CR8 V-BR 49 T16 PXT8 T24 P-8 BR-V 24 R16 PXR8 R24 P+8 V-S 50 S-V 25 Connector Pin Nos Analog Line (8) Digital Line & Analog Line (16) 2-wire Data Line & Digital Line 4-wire Digital Line & Analog Line (24) 2-wire Hybrid Line MET Line AUX Trunk CO Trunk The wire colors in this chart apply only to B25A and A25B cables. H cable colors are not shown. 4 Issue 3
5 The following wire colors apply to this chart: W White S Slate (Grey) BL Blue R Red O Orange BK Black G Green Y Yellow BR Brown V Violet The following abbreviations apply for all circuit packs unless otherwise noted: T,R PBX transmit voice T Tip (A) Green T1,R1 PBX receive voice R Ring (B) Red M PBX transmit signal S Sleeve E PBX receive signal PX PBX transmit TX Terminal transmit LI, LI* Digital Trunk IN LO, LO* Digital Trunk OUT Issue 3 5
6 Circuit Pack and Auxiliary Equipment Leads (Pinout Charts) Color Connector Pin Nos CO Trunk 3-wire DID/ DIOD Trunk Tie Trunk DS1 Tie Trunk ISDN BRI Line 4-wire ISDN BRI Line 2-wire Packet Data Line W-BL 26 A1 T1 T1 PXR1 T1 TXT1 T1 BL-W 01 B1 R1 R1 PXT1 R1 TXR1 R1 W-O 27 T11 TXT1 T2 PXT1 O-W 02 R11 TXR1 R2 PXR1 W-G 28 E1 PXR2 T3 TXT2 G-W 03 C1 M1 PXT2 R3 TXR2 W-BR 29 A2 T2 T2 TXT2 T4 PXT2 T2 BR-W 04 B2 R2 R2 TXR2 R4 PXR2 R2 W-S 30 T12 PXR3 T5 TXT3 S-W 05 R12 PXT3 R5 TXR3 R-BL 31 E2 TXT3 T6 PXT3 BL-R 06 C2 M2 TXR3 R6 PXR3 R-O 32 A3 T3 T3 PXR4 T7 TXT4 T3 O-R 07 B3 R3 R3 PXT4 R7 TXR4 R3 R-G 33 T13 TXT4 T8 PXT4 G-R 08 R13 TXR4 R8 PXR4 R-BR 34 E3 PXR5 T9 TXT5 BR-R 09 C3 M3 PXT5 R9 TXR5 R-S 35 A4 T4 T4 TXT5 T10 PXT5 T4 S-R 10 B4 R4 R4 TXR5 R10 PXR5 R4 BK-BL 36 T14 PXR6 T11 TXT6 BL-BK 11 R14 PXT6 R11 TXR6 BK-O 37 E4 TXT6 T12 PXT6 O-BK 12 M4 TXR6 R12 PXR6 BK-G 38 T5 PXR7 TXT7 G-BK 13 R5 PXT7 TXR7 BK-BR 39 TXT7 PXT7 4 Port DIOD 6 Issue 3
7 Color BR-BK 14 TXR7 PXR7 BK-S 40 PXR8 TXT8 S-BK 15 PXT8 TXR8 Y-BL 41 T6 TXT8 PXT8 BL-Y 16 R6 TXR8 PXR8 Y-O 42 PXR9 TXT9 O-Y 17 PXT9 TXR9 Y-G 43 TXT9 PXT9 G-Y 18 TXR9 PXR9 Y-BR 44 T7 PXR10 TXT10 BR-Y 19 R7 PXT10 TXR10 Y-S 45 TXT10 PXT10 S-Y 20 TXR10 PXR10 V-BL 46 PXR11 TXT11 BL-V 21 PXT11 TXR11 V-O 47 T8 LI* TXT11 PXT11 O-V 22 R8 LI TXR11 PXR11 V-G 48 LO PXR12 TXT12 G-V 23 LO* PXT12 TXR12 V-BR 49 LBACK2 TXT12 PXT12 BR-V 24 LBACK1 TXR12 PXR12 V-S 50 S-V 25 Connector Pin Nos CO Trunk 3-wire DID/ DIOD Trunk Tie Trunk DS1 Tie Trunk ISDN BRI Line 4-wire ISDN BRI Line 2-wire Packet Data Line 4 Port DIOD The wire colors in this chart apply only to B25A and A25B cables. H cable colors are not shown. Issue 3 7
8 The following wire colors apply to this chart: W White S Slate (Grey) BL Blue R Red O Orange BK Black G Green Y Yellow BR Brown V Violet The following abbreviations apply for all circuit packs unless otherwise noted T,R PBX transmit voice T Tip (A) Green T1,R1 PBX receive voice R Ring (B) Red M PBX transmit signal S Sleeve E PBX receive signal PX PBX transmit TX Terminal transmit LI, LI* Digital Trunk IN LO, LO* Digital Trunk OUT 8 Issue 3
9 Lead and Color Designations Cross-Connect Pin Color Amphenol Pin 1 W-BL BL-W W-O O-W W-G G-W W-BR BR-W W-SL SL-W R-BL BL-R R-O O-R R-G G-R R-BR BR-R R-SL SL-R BK-BL BL-BK BK-O O-BK BK-G G-BK BK-BR BR-BK BK-SL Backplane Pin Issue 3 9
10 Cross-Connect Pin Color Amphenol Pin 30 SL-BK Y-BL BL-Y Y-O O-Y Y-G G-Y Y-BR BR-Y Y-SL SL-Y V-BL BL-V V-O O-V V-G G-V V-BR BR-V V-SL SL-V Backplane Pin 10 Issue 3
11 TN2185B ISDN-BRI 4-wire S Interface Port Signal Cross-Connect Pin Color Amphenol Pin Backplane Pin 1 TXT.1 1 W-BL TXR.1 2 BL-W PXT.1 3 W-O PXR.1 4 O-W TXT.2 5 W-G TXR.2 6 G-W PXT.2 7 W-BR PXR.2 8 BR-W TXT.3 9 W-SL TXR.3 10 SL-W PXT.3 11 R-BL PXR.3 12 BL-R TXT.4 13 R-O TXR.4 14 O-R PXT.4 15 R-G PXR.4 16 G-R TXT.5 17 R-BR TXR.5 18 BR-R PXT.5 19 R-SL PXR.5 20 SL-R TXT.6 21 BK-BL TXR.6 22 BL-BK PXT.6 23 BK-O PXR.6 24 O-BK TXT.7 25 BK-G TXR.7 26 G-BK PXT.7 27 BK-BR PXR.7 28 BR-BK Issue 3 11
12 Port Signal Cross-Connect Pin Color Amphenol Pin Backplane Pin 8 TXT.8 29 BK-SL TXR.8 30 SL-BK PXT.8 31 Y-BL PXR.8 32 BL-Y Issue 3
13 TN2198 ISDN-BRI 2-wire U Interface Port Signal * Pins 25 and 50 are grounded by the backplane. Cross-Connect Pin Color Amphenol Pin Backplane Pin 1 T.1 1 W-BL R.1 2 BL-W T.2 3 W-O R.2 4 O-W T.3 5 W-G R.3 6 G-W T.4 7 W-BR R.4 8 BR-W T.5 9 W-SL R.5 10 SL-W T.6 11 R-BL R.6 12 BL-R T.7 13 R-O R.7 14 O-R T.8 15 R-G R.8 16 G-R T.9 17 R-BR R.9 18 BR-R T R-SL R SL-R T BK-BL R BL-BK T BK-O R O-BK Issue 3 13
14 TN793B 24-Port Analog Line circuit pack Port Signal Cross-Connect Pin Color Amphenol Pin Backplane Pin 1 T.1 1 W-BL R.1 2 BL-W T.2 3 W-O R.2 4 O-W T.3 5 W-G R.3 6 G-W T.4 7 W-BR R.4 8 BR-W T.5 9 W-SL R.5 10 SL-W T.6 11 R-BL R.6 12 BL-R T.7 13 R-O R.7 14 O-R T.8 15 R-G R.8 16 G-R T.9 17 R-BR R.9 18 BR-R T R-SL R SL-R T BK-BL R BL-BK T BK-O R O-BK T BK-G R G-BK Issue 3
15 Port Signal Cross-Connect Pin Color Amphenol Pin Backplane Pin 14 T BK-B R R BR-B K T BK-SL R SL-BK T Y-BL R BL-Y T Y-O R O-Y T Y-G R G-Y T Y-BR R BR-Y T Y-SL R SL-Y T V-BL R BL-V T V-O R O-V T V-G R G-V T V-BR R BR-V Issue 3 15
16 DS1 Interface Cable Pinouts H cable pinout 50-Pin 15-Pin Pin Color Designation Pin Color Designation 02 W-BL 03 BL-W 47 W-G LI (High) 11 W-G LI (High) 22 G-W LI 03 G-W LI 48 W-BR LO 09 W-BR LO 23 BR-W LO (High) 01 BR LO (High) 49 W-SL LOOP2 06 W-SL LOOP2 24 SL-W LOOP1 05 SL-W LOOP1 All other pins empty. C6F cable pinout Wire Color Lead Designation White/Green LI* (High Side) 47 Green LI 22 White/Brown LO 48 Brown LO* (High Side) 23 White/Slate LBACK2 49 Slate LBACK1 24 Pin Number 16 Issue 3
17 Port Circuit Pack and Telephone Pin Designations Pin on Modular Plug 1 TXT 4-wire: 8400-Series, 606A1 2-wire: 302D, 8400-Series, 603E 8510T BRI (with adjunct speaker phone) 2 TXR T 3 PXT TXT R Analog Station, Modem 4 T PXR T 5 R PXT No R 6 PXR TXR Connection 4-pin modular 7-48VDC (-48VDC) (-48VDC) jack -48VDC 8 GRD GRD GRD GRD Circuit Pack TN754 4-wire digital (8 port) TN wire digital (16 port) TN wire digital (24 port) TN556 ISDN-BRI Line TN2183 Analog line (16 port) NT1 TN wire BRI line PX TX PBX transmitt Tip (A) Terminal transmitrring(b) Issue 3 17
18 Auxiliary Lead Appearances at AUX Connector (MCC1 and SCC1 media gateways only) Color 1 Pinouts Output Power W-BL BL-W W-O O-W W-G G-W W-BR BR-W W-S S-W R-BL BL-R R-O O-R R-G G-R R-BR BR-R R-S S-R Major 2 Minor* 28 3 GRD 29 4 GRD 30 5 GRD 31 6 GRD 32 7 GRD Not Connected Not Connected Not Connected 18 Issue 3
19 Color 1 Pinouts Output Power BK-BL BL-BK BK-O O-BK BK-G G-BK BK-BR BR-BK BK-S S-BK Y-BL BL-Y Y-O O-Y Y-G G-Y Y-BR BR-Y Y-S S-Y V-BL BL-V V-O O-V V-G G-V V-BR BR-V V-S S-V GND -48 GND -48 GND -48 GND -48 GND -48 GND -48 GND Not Connected GND -48 GND -48 GND -48 Not Connected Ext Alarm A** Ext Alarm Return Not Connected INADS Tip INADS Ring Emergency Transfer Relay Power AUX Power 1. Color designation is the main wire color and the color of the stripe on the wire. The following wire colors apply: W White; BL Blue; O Orange; G Green; BR Brown S Slate (Grey); R Red; BK Black; Y Yellow; V Violet 2. *External alarm with signal incoming to media server. **External alarm with signal outgoing from media server. Issue 3 19
20 External Alarm Connector Pinout Pin Designation Definition 26 Not Used 1 Not Used 27 Not Used 2 Not Used 28 Not Used 3 Not Used 29 Not Used 4 Not Used 30 Not Used 5 Not Used 31 Not Used 6 Not Used 32 Not Used 7 Not Used 33 RFA2 + Rectifier Failure (positive) 8 RFA2 - Rectifier Failure (negative) 34 ACF2 + AC Failure (positive) 9 ACF2 - AC Failure (negative) 35 BIF2 + Battery Interface Failure (positive) 10 BIF2 - Battery Interface Failure (negative) 36 BOD2 + Battery On Discharge (positive) 11 BOD2 - Battery On Discharge (negative) 37 Not Used 12 RXD Receive Data 38 TXD Transmit Data 13 DTR Data Terminal Ready 39 RS-232 GRD RS-232 Ground 14 DSR Data Set Ready 20 Issue 3
21 Pin Designation Definition 40 RTS Request To Send 15 Not Used 41 Not Used 16 Not Used 42 Not Used 17 Not Used 43 Not Used 18 Not Used 44 Not Used 19 Not Used 45 Not Used 20 Not Used 46 Not Used 21 Not Used 47 Not Used 22 Not Used 48 Not Used 23 Not Used 49 Not Used 24 Not Used 50 Not Used 25 Not Used Issue 3 21
22 Emergency Transfer Panel to MDF Pinouts for 25-pair Connector 26 W-BL TTC1 Tip-PBX Trunk Circuit 1 1 BL-W RTC1 Ring-PBX Trunk Circuit 1 27 W-O TTK1 Tip-CO Trunk Circuit 1 2 O-W RTK1 Ring-CO Trunk Circuit 1 28 W-G TLC1 Tip-PBX Line Port 1 3 G-W RLC1 Ring-PBX Line Port 1 29 W-BR TST1 Tip-Emergency Terminal 1 4 BR-W RST1 Ring-Emergency Terminal 1 30 W-S TTC2 Tip-PBX Trunk Circuit 2 5 S-W RTC2 Ring-PBX Trunk Circuit 2 31 R-BL TTK2 Tip-CO Trunk Circuit 2 6 BL-R RTK2 Ring-CO Trunk Circuit 2 32 R-O TLC2 Tip-PBX Line Port 2 7 O-R RLC2 Ring-PBX Line Port 2 33 R-G TST2 Tip-Emergency Terminal 2 8 G-R RST2 Ring-Emergency Terminal 2 34 R-BR TTC3 Tip-PBX Trunk Circuit 3 9 BR-R RTC3 Ring-PBX Trunk Circuit 3 35 R-S TTK3 Tip-CO Trunk Circuit 3 10 S-R RTK3 Ring-CO Line Port 3 36 BK-BL TLC3 Tip-PBX Line Port 3 11 BL-BK RLC3 Ring-PBX Line Port 3 37 BK-O TST3 Tip-Emergency Terminal 3 12 O-BK RST3 Ring-Emergency Terminal 3 38 BK-G TTC4 Tip-PBX Trunk Circuit 4 13 G-BK RTC4 Ring-PBX Trunk Circuit 4 39 BK-BR TTK4 Tip-CO Trunk Circuit 4 14 BR-BK RTK4 Ring-CO Trunk Circuit 4 22 Issue 3
23 40 BK-S TLC4 Tip-PBX Line Port 4 15 S-BK RLC4 Ring-PBX Line Port 4 41 Y-BL TST4 Tip-Emergency Terminal 4 16 BL-Y RST4 Ring-Emergency Terminal 4 42 Y-O TTC5 Tip-PBX Trunk Circuit 5 17 O-Y RTC5 Ring-PBX Trunk Circuit 5 43 Y-G TTK5 Tip-CO Trunk Circuit 5 18 G-Y RTK5 Ring-CO Trunk Circuit 5 44 Y-BR TLC5 Tip-PBX Line Port 5 19 BR-Y RLC5 Ring-PBX Line Port 5 45 Y-S TST5 Tip-Emergency Terminal 5 20 S-Y RST5 Ring-Emergency Terminal 5 46 V-BL COM1 Common 1 Relay Contact 21 BL-V NO1 Normally Open 1 Contact 47 V-O NC2 Normally Closed 2 Contact 22 O-V NC1 Normally Closed 1 Contact 48 V-G COM2 Common 2 Relay Contact 23 G-V NO2 Normally Open 2 Contact 49 V-BR 24 BR-V 50 V-S GRD Ground from Aux Cable 25 S-V -48PX -48V from AUX Cable Issue 3 23
24 TN799DP C-LAN Pinouts Backplane Pin 25-Pair Wire Color Lead Name 103 White/Orange TD Orange/White TD White/Green RD Green/White RD- 3 Peripheral Connector Pin Pinouts for the Ethernet adapter for TN799DP C-LAN, TN2302AP IP Media Processor, and TN2501AP VAL To RJ45 jack From 50-pin plug Function 1 32 TX+ 2 7 TX RX GND 5 43 GND 6 19 RX GND 8 20 GND 24 Issue 3
25 TN2312AP IP Server Interface Adapter Pinouts To RJ45 jack From 50-pin plug Function 1 43 TX TX RX RX- 39* FP-NBPSEL 14* GND *pins are shorted on 50-pin plug Issue 3 25
26 26 Issue 3
V-119RTVA VOICE ANNOUNCE V-119RTHF HANDSFREE TALKBACK 19 ZONE INTERCOM/PAGE CONTROL UNITS
VSP-V-119RTVA/119RTHF Issue 7 V-119RTVA VOICE ANNOUNCE V-119RTHF HANDSFREE TALKBACK 19 ZONE INTERCOM/PAGE CONTROL UNITS GENERAL These instructions provide identification, installation, operation, connection
V-2901A UNIVERSAL DOOR ANSWERING SYSTEM
VSP-V-2901A Issue 4 V-2901A UNIVERSAL DOOR ANSWERING SYSTEM INTRODUCTION The V-2901A, Universal Door Answering System, when used with Valcom Doorplate Speakers, provides voice paging with handsfree reply
TECHNICIAN S HANDBOOK. LIGHTWARE 32, Release 1.0
TECHNICIAN S HANDBOOK LIGHTWARE 32, Release 1.0 NOTICE The information contained in this document is believed to be accurate in all respects but is not warranted by Mitel Networks Corporation (MITEL ).
Cable Pinouts. SRP I/O Module
Cable Pinouts C This appendix lists the cables and connector pinout assignments for the cables used with the ERX-700 series and ERX-1400 series. Topic Page SRP I/O Module C-1 CT1 and CE1 I/O Modules C-4
Making a DB to RJ45 adapter.
Making a DB to RJ45 adapter. DB9 to RJ45 adapters are often used in combination with a RS232 repeater for extending the distance of a serial RS232 link, but can be used for any adapter or converter purposes.
Cable Specifications and Information
APPENDIXA This appendix provides the connector and pinout information you need for making or purchasing cables used with Cisco VG350 Voice Gateway. To order cables from Cisco, see the Obtaining Technical
ECR Shelf System Installation Guide Centralized Rack Mount Call Recording
Hardware & Installation Guide Algo Communication Products Ltd. Customer Support and Sales Tel: 1.877.884.2546 Fax: 604.437.5726 Email: sales@algosolutions.com support@algosolutions.com www.algosolutions.com
TECHNICIAN S HANDBOOK
TECHNICIAN S HANDBOOK Table of Contents Table of Contents PRODUCT INFORMATION...1 Disclaimer...1 Contacting Technical Support...2 Sending Us Feedback...2 About The Document Set...2 INSTALL SYSTEM...4 System
Connectors and Cables
APPENDIX B This appendix describes the connectors, cables, and adapters that you use to connect the switch to other devices. Connector Specifications 10/100 Ports The 10/100 Ethernet ports use standard
Music On Hold and Paging
Music On Hold and Paging 24 Objectives When you finish this module, you will be able to: Describe Music On Hold (MOH). Program analog and digital MOH. Download a.wav file for Embedded MOH. Describe Loudspeaker
Encore Controller to Router Connections
Encore Presentation System Encore Controller to Router Connections Contents: Scope... 2 EXT COMM Pinouts... 2 Cable Connection Straight Through... 3 Cable Connection Null Modem... 3 Lantronix Ethernet
Cable Specifications and Information
APPENDIX A This appendix provides the connector and pinout information you need for making or purchasing cables used with Cisco VG224 voice gateway. To order cables from Cisco, see the Obtaining Technical
Hardware Reference. Linux Device Server IGW/922 with DIL/NetPC ADNP/9200
Linux Device Server IGW/922 with DIL/NetPC ADNP/9200 Hardware Reference SSV Embedded Systems Heisterbergallee 72 D-30453 Hannover Phone: +49 (0)511/40 000-0 Fax: +49 (0)511/40 000-40 E-mail: sales@ist1.de
Comtrol Cable User Guide
Comtrol Cable User Guide Trademark Notices Comtrol and DeviceMaster are trademarks of Comtrol Corporation. PortVision is a registered trademark of Comtrol Corporation. Microsoft and Windows are registered
VOICE RECORDING SYSTEM ISDN PRI / BRI
Sense Box VOICE RECORDING SYSTEM ISDN PRI / BRI / Analog SUB-SYSTEM ISDN2, ISDN30 Sense Box USER MANUAL TABLE OF CONTENTS 1. STATUTORY INFORMATION... 3 1.1 SAFETY WARNING... 3 1.2 SAFETY EXTRA LOW VOLTAGE
Draper Low Voltage, Remote Control, Serial and Network Wiring Guide
Draper Low Voltage, Remote Control, Serial and Network Wiring Guide Copyright 2007 Draper Inc. Form LV-RC-Serial-Network_Wiring07 Print ed in U.S.A. Draper Low Voltage, Remote Control, Serial and Network
PCM2000 Configuration Guide
2000 Configuration Guide 2012 Bogen Communications, Inc. All rights reserved. Specifications subject to change without notice. 54501901C 1209 2 Contents SECTION I APPLICATION CONFIGURATIONS...431 Configuration
Connector and Cable Specifications
APPENDIX B This appendix provides the following cabling and pinout information for the Cisco IAD1101 integrated access device: Console Port Signals and Pinouts Ethernet Connector Pinouts Analog Subscriber
Cable Specifications. T3 Trunk Cabling APPENDIX
APPENDIX B This appendix contains details on the MGX 8230 cabling. It includes the following sections: T3 Trunk Cabling Frame Relay Cabling DC Power Cabling AC Power Cabling Control and Clock Cabling External
RS-232 COMMUNICATIONS
Technical Note D64 0815 RS-232 COMMUNICATIONS RS-232 is an Electronics Industries Association (EIA) standard designed to aid in connecting equipment together for serial communications. The standard specifies
Adit 600 Product Guide
Adit 600 Product Guide Adit 600 R8.0 Broadband Customer Service Terminal which fulfills many channel bank, multiport CSU/DSU, Integrated Access Device, distributed DLC and Digital Cross-connect applications.
Vertical Phone System Upgrades 2014. Scope of Work
Vertical Phone System Upgrades 2014 Scope of Work Project Overview Install new Vertical phone system and phones on site. Complete testing with API helpdesk. Remove old phone system, phones and box up for
IPG/7700 Hardware Manual SYSTECH. Document number 80-001099-7 Revision A
IPG/7700 Hardware Manual SYSTECH C O R P O R A T I O N Document number 80-001099-7 Revision A Created 2010, and Protected Under the U.S. Copyright Act of 1976. Copyright 2010, SYSTECH Corporation All Rights
RJ45 Shielded (standard) port pinout. CS9000, Jetstream 4000 + 8500, Lanstream 2000, RTA8/RJX, RRC16, MTA8/RJX & SXDC8/RJX
Shielded (standard) port pinout Pin Circuit Function 1 DCD Input Data Carrier Detect 2 DSR Output Data Set Ready 3 DTR Input Data Terminal Ready 4 S/GND Signal Ground 5 TXD Output Transmit Data 6 RXD Input
Cabling Specifications
APPENDIX A This appendix provides cabling and pinout information for feature cards on the Cisco AS5350XM and Cisco AS5400XM universal gateways. It contains the following sections: 2-Port and 4-Port T1
Section 11. 4-wire E&M/TO Configuration. 4-Wire E&M/TO Voice Card. About This Section. Functional Description. Physical Description
Section 11 4-wire E&M/TO Configuration About This Section This section describes how to configure the 4-wire E&M/Transmission Only (E&M/TO) 12-channel voice card for connecting the Access Bank II to T1
RJ11 RS-232 Interface
H NS TN30 RJ11 RS-232 Interface 1.0 General The back panel of the CPP-3794 provides a combination of 9 pin DB connectors and RJ11 connectors for connecting RS-232 serial cables. The 9 pin DB connector
Cabling Guide for Console and AUX Ports
Cabling Guide for Console and AUX Ports Contents Introduction Prerequisites Requirements Components Used Conventions Table of Routers with Console and AUX Ports Console Port Settings for Terminal Connection
Connector and Cable Specifications
APPENDIXB This chapter describes the connector and cable specifications. Connector Specifications, page B-1l Cable and Adapter Specifications, page B-5 Connector Specifications 10/100/1000 Ports, page
2007-2009 Active Voice, LLC. All rights reserved. First edition 2009.
2007-2009 Active Voice, LLC. All rights reserved. First edition 2009. Active Voice and UNIVERGE UM8500 are trademarks of Active Voice, LLC. Other brands and product names used in this document are trademarks
How To Set Up A 366101 Modem (Marc) Model 366101 (Marc) Model 2 (Marr) Model 1 (Marm) Model 4 (Mariar) Model 8 (Marp) Model 6 (Mar
DIN Rail Mounted Leased Line Modem Users Manual 366-101 Rev. 2 Copyright 2008 Miille Applied Research Co., Inc. Houston, Texas This page is left blank intentionally Page i TABLE OF CONTENTS LIST OF FIGURES...
DEX28-VR3P Quick Installation Guide
DEX28-VR3P Quick Installation Guide DEX28-VR3P PBX DTSs 1 3 5 2 4 6 Procedure to start recording: 1. Connect ODD ports (1, 3 or 5) to PBX (MD110 ELU28 or MX-ONE ELU33 board) 2. Connect EVEN ports (2, 4
maxon motor maxon motor control EPOS Positioning Controller Cable Starting Set Edition June 2006 part number 302287 Positioning Controller
control EPOS Positioning Controller Cable Starting Set Edition June 2006 24/1 part number 302287 Positioning Controller Documentation Cable Starting Set 1 Table of contents 1 Table of contents... 2 2 Table
FITNESS FACILITY WIRING SPECIFICATIONS. NETPULSE Inc. 2331 3rd Street San Francisco, CA 94107 Phone: 415.643.0223
FITNESS FACILITY WIRING SPECIFICATIONS NETPULSE Inc. 2331 3rd Street San Francisco, CA 94107 Phone: 415.643.0223 CONTENTS: - Scope of work Summary - Equipment list - Technical specifications - Map of data
4. INSTALLATION... 4-1 4.1 SITE PLANNING... 4-1 4.2 INSTALLATION PLANNING... 4-2
4. INSTALLATION... 4-1 4.1 SITE PLANNING... 4-1 4.2 INSTALLATION PLANNING... 4-2 4.3 HARDWARE... 4-2 4.3.1 UNPACKING THE KSU... 4-2 4.3.2 KSU MOUNTING... 4-3 4.3.3 KSU GROUNDING... 4-5 4.3.4 POWER LINE
Polycom Conference Link Quick Reference Guide
co de cs X ta Ce ble ilin m ic g a Re mic rra y alp ro ph s r o Re ese alp nc ne a e rra r ys So esen Gro ce up ds co G So tru rou de cs c p ds ture tab ta le tio m n ics IP 0 00 HDX codecs HDX table mic
Data Bulletin. Communications Wiring for POWERLINK G3 Systems Class 1210 ABOUT THIS BULLETIN APPLICATION INTRODUCTION.
Data Bulletin 1210DB0002R3/05 03/2005 LaVergne, TN, USA Communications Wiring for POWERLINK G3 Systems Class 1210 Retain for future use. ABOUT THIS BULLETIN This data bulletin describes the proper wiring
Experts in Chem-Feed and Water Treatment. How To Connect. Aquatrac Training. ProMinent Fluid Controls
How To Connect Aquatrac Training Applies to: Multiflex Browser Applies to: Multiflex Browser Trackster 3 Applies to: Multiflex Browser Trackster 3 Aegis Browser Applies to: Multiflex Browser Trackster
FZ400 1997-1998 WIRING DIAGRAM (JAPANESE MARKET FAZER 400) 5
FZ400 1997-1998 WIRING DIAGRAM (JAPANESE MARKET FAZER 400) 5 1 2 4 7 6 11 12 13 13 12 13 3 13 8 9 56 14 59 52 54 15 48 55 34 22 16 51 50 60 47 46 36 35 23 17 49 24 25 18 44 37 38 39 40 58 33 26 27 28 29
Cable Connection Procedures for Cisco 1900 Series Routers
CHAPTER 5 Cable Connection Procedures for Cisco 1900 Series Routers This document describes how to connect your Cisco 1941 integrated services router to a power source and to networks and external devices.
TDAS G5-DB Hardware User s Manual
TDAS G5-DB Hardware User s Manual July 2003 Rev. 1A Table of Contents DTS Support... 3 Introducing the TDAS G5-DB... 4 Summary of TDAS G5-DB Features... 4 Basic Care and Handling... 4 Shock Rating...5
ViZion Installation Guide
ViZion Installation Guide v2.0 1 ViZion Installation Guide Table of Contents Inventory Hardware Setup Understanding Synchronization Cable Begin by taking an inventory of the required equipment DR Unit
LAN / WAN Connection Of Instruments with Serial Interface By Using a Terminal Server
Products: EFA with EFA Scan, DVRM and DVMD with Realtime Monitor or Stream Explorer DVMD-B1 LAN / WAN Connection Of Instruments with Serial Interface By Using a Terminal Server Remote control of test and
GM1200E Interface Cable
GM00E Interface Cable SPK+ Mic Aud Ext PTT SPK/0 Ext Alrm RJ Plug PTT/0 Flat Tx Audio SCI Data In SCI Data Out Emerg/ NPD In Motorola Accessory Connector (rear view) 0 Ign Det Flat Rx Audio CTS SW B+ Hook
Tele Eye DT Series. Installation Guide. Dialup CCTV Transmitter DT-103G DT-103P DT-103D
Tele Eye DT Series Dialup CCTV Transmitter DT-103G DT-103P DT-103D Installation Guide Notice: Signal Communications Limited reserves the right to make improvements to the product described in this manual
PROPRIETARY INFORMATION NOTICE
2012 LX I Technologies, Inc. Engineering Department [LEASED LINE MODEM LXV92] This document will cover the operations and installation on the LXV92 92 lease line modem. This modem is designed to work with
Cable Guide. Click on the subject to view the information. Digi Cables Building Cables General Cable Information
Cable Guide Click on the subject to view the information. Digi Cables Building Cables General Cable Information Digi Cables Click on the subject to view the information. Digi Connector Options Digi Connector
APPLICATION NOTE. Leased Line Modem. Leased Line Modem...3. Introduction... 3. Key Concepts... 4
Issue Date 02/18/02 APPLICATION NOTE Leased Line Modem Leased Line Modem...3 troduction... 3 Key Concepts... 4 Application Details...4 Theory of Operation...6 Components...8 Planning Considerations...10
LBNP16312. RS-232/485/422 serial device server. User manual
Tu Sitio de Automatización! LBNP16312 RS-232/485/422 serial device server User manual Summarize-----------------------------------------------------------------------------14-3 Package checklist---------------------------------------------------------------------14-3
Power Supply and Cabling Options. SmartTrak 100/101/140
Power Supply and Cabling Options SmartTrak 00/0/40 2 Power Supply and Cabling Options SmartTrak 00/0/40 Table of Contents Power Supplies... Communication Cables... Accessory Options... Appendix A Communication
5-port / 8-port 10/100BaseTX Industrial Ethernet Switch User Manual
5-port / 8-port 10/100BaseTX Industrial Ethernet Switch User Manual Content Overview... 1 Introduction... 1 Features... 3 Packing List... 4 Safety Precaution... 4 Hardware Description... 5 Front Panel...
RS-232 Cables, Wiring and Pinouts. Brief tutorial and pinouts for RS-232, T1/E1 and V.35. Contents
RS-232 Cables, Wiring and Pinouts Brief tutorial and pinouts for RS-232, T1/E1 and V.35. Contents DTE (PC) and DCE (Modem) DB9 and DB25 Male and Female Pin Numbering RS232 on DB25 Pinout (RS-232C) RS232
Application Note 2. Using the TCPDIAL & TCPPERM Commands to Connect Two TransPort router Serial Interfaces Over TCP/IP.
Application Note 2 Using the TCPDIAL & TCPPERM Commands to Connect Two TransPort router Serial Interfaces Over TCP/IP. Reverse Telnet or Serial Terminal Server MultiTX feature UK Support March 2014 1 Contents
NEC 2400 IMS --- T1 PRI
UCC / Avaya one-x Speech Server Configuration Note 3610 Version F (05/08) UCC / Avaya one-x Speech NEC 2400 IMS --- T1 PRI T1 PRI/ISDN TRUNKS Central Office Digital Trunks UCC SPEECH ACCESS SERVER AVAYA
TOTAL RECALL MAX Potential Connection Diagrams CALL RECORDING. Product Specifications YOU NEED TOTAL RECALL MAX
Product Specifications TOTAL RECALL MAX Potential Connection Diagrams When your business depends on CALL RECORDING YOU NEED TOTAL RECALL MAX VoIP Connectivity Diagram 1 Port Mirroring In a VOIP telephony
Cisco - Ethernet 100BaseTX and 10BaseT Cables: Guidelines and Specifications
Page 1 of 8 Ethernet 100BaseTX and 10BaseT Cables: Guidelines and Specifications Contents Introduction Prerequisites Requirements Components Used Conventions Which Cable Do I Need? Ethernet Cabling Guidelines
NS-205-IP67 5-Port Industrial 10/100 Mbps Ethernet Switch with IP67 Casing
NS-205-IP67 5-Port Industrial 10/100 Mbps Ethernet Switch with IP67 Casing Introduction: NS-205-IP67 Ethernet Switches are designed for use in industrial waterproof/harsh environments. The rugged packaging
Connecting the Console Port to a PC
This document covers tasks associated with connecting a console port to a PC, and includes the following topics: Console (rollover) Cable and Adapters Making the physical connection Connecting using HyperTerminal
Branch Office Extender 6000 555-025-212 PBXgateway Quick Installation Guide Issue 2.3/March 2000
Branch Office Extender 6000 555-025-212 PBXgateway Quick Installation Guide Issue 2.3/March 2000 Purpose of this Document This document provides the step-by-step process for the complete installation,
Product Overview. Features CHAPTER
CHAPTER 1 This chapter describes the Cisco IAD1101 integrated access device chassis, and the line interface modules supported by the Cisco IAD1101. This chapter includes the following sections: Features
XPort Universal Demo Board User Guide
XPort Universal Demo Board User Guide Part Number 900-563 Revision A September 2009 Copyright and Trademark Contacts 2009 Lantronix. All rights reserved. No part of the contents of this book may be transmitted
ARDUINO SEVERINO SERIAL SINGLE SIDED VERSION 3 S3v3 (REVISION 2) USER MANUAL
ARDUINO SEVERINO SERIAL SINGLE SIDED VERSION 3 S3v3 (REVISION 2) USER MANUAL X1: DE-9 serial connector Used to connect computer (or other devices) using RS-232 standard. Needs a serial cable, with at least
HSG Engineering Tech Bulletin
Specifications subject to change OCT 2013; Rev. 1.3 HSG Engineering Tech Bulletin Recommended RS-485 Wiring for NetAXS-4/NetAXS-123 Loops Overview This document provides the recommended RS-485 wiring for
IPX AUTOMATIC IP NETWORK LOSS BACKUP A/B SWITCH INSTRUCTION BOOK IB6444-02
IPX AUTOMATIC IP NETWORK LOSS BACKUP A/B SWITCH INSTRUCTION BOOK IB6444-02 TABLE OF CONTENTS DESCRIPTION 2 MOUNTING INSTRUCTIONS 2 HOW TO CABLE THE IPX 2/3 POWER SUPPLY INSTALLATION 3 OPERATION 3 CARE
OPERATING INSTRUCTIONS Model ST-888 DTMF ANI/ENI Display Decoder
P R O D U C T G R O U P OPERATING INSTRUCTIONS Model ST-888 DTMF ANI/ENI Display Decoder Manual # 600-0901 November 30, 1999 Rev. D - 99068 DESCRIPTION The ST-888 Mobilecall Display Decoder is a desktop
Cable Specifications
APPENDIX C Cable Specifications This appendix provides the following pinout information: Console Port Pinouts (RJ-45), Table C-1 Auxiliary Port Pinouts (RJ-45), Table C-2 EIA-530 DTE Cable Pinout (DB-60
TELEPHONE CABLING TECHNOLOGY INFINITY CABLING
TELEPHONE CABLING TECHNOLOGY Main Types Outdoor Voice Grade Telephone Cable Heavy Duty Type, Weatherproof, Sun Protected, Mechanical protection from damage. Some types can be buried in the ground. Cable
RS-232 to TTL Converter Cables SuperDroid Robots 2013 www.superdroidrobots.com
Description: Designed for easy conversion of a RS-232 signals from a computer to TTL signals in order to interface a computer to a microcontroller or similar electronic devices Features: 72-inch in length
Frame Relay Cabling This section describes the cabling and connector pinouts for the Frame Relay cards.
A P P E N D I B Cabling Summary Introduction This appendix contains details on the MG 8850 cabling. Note In all cable references, the transmit direction is away from the switch, and the receive direction
TFM GSMRoute BRI. Quick Installation Guide
TFM GSMRoute BRI Quick Installation Guide Connecting to ISDN Lines Basic Rate ISDN can be connected to the GSMRoute-BRI. Auto detects Point to Point or Point to Multipoint. Auto detects if ISDN circuit
RS232C < - > RS485 CONVERTER S MANUAL. Model: LD15U. Phone: 91-79-4002 4896 / 97 / 98 (M) 0-98253-50221 www.interfaceproducts.info
RS232C < - > RS485 CONVERTER S MANUAL Model: LD15U INTRODUCTION Milestone s model LD-15U is a RS232 to RS 485 converter is designed for highspeed data transmission between computer system and or peripherals
DT105X / PB105 Series
DT105 / Series Cash Drawer Trigger & Printer Beeper User's Manual TM951031-05 Contents Information... 1 Technical And Operational Description... 3 Connections Load Test Specifications......... 5 7 8 Communication
PBX-64 Analog and IP Phone System Installation
I. Introduction This PBX system is specially designed to accommodate Talk-A-Phone Emergency/Information Phones, both analog and VoIP. Versatile and robust, these full-featured PBXs provide a complete head-end
KVM - DVI, USB 2.0, Cat 5 Extender
KVM - DVI, USB 2.0, Cat 5 Extender 330 feet (100 meters) EL5100 User Guide Powered by Thank you for purchasing the KVM - DVI, USB 2.0, Cat 5 Extender 330 feet (100 meters) Please read this guide thoroughly.
MyPBX U510 Installation Guide
MyPBX U510 Installation Guide Version 1.1 Date: 9th, Aug, 2013 Yeastar Information Technology Co. Ltd Contents 1. PREPARATION BEFORE INSTALLATION... 4 2. HARDWARE SPECIFICATIONS... 5 2.1 Overview... 5
USER MANUAL. PingBrother EPIW104 managed passive poe switch & IP watchdog
USER MANUAL PingBrother EPIW104 managed passive poe switch & IP watchdog CONTENT Content... 2 Chapter 1... 3 1.1 Preface... 3 1.2 CE mark warning... 3 1.3 FCC warning... 4 Chapter 2... 5 2.1 Physical description...
LMR16TC Mini 10BASE-T Repeater. Installation Guide
LMR16TC Mini 10BASE-T Repeater Installation Guide LMR16TC Ethernet Mini Hub/Repeater Installation Guide The Lantronix LMR16TC is a multi-port hub that provides multi-media wiring connections for up to
Adding New Hardware for Avaya Media Servers and Gateways Release 3.1
Adding New Hardware for Avaya Media Servers and Gateways Release 3.1 03-300684 Issue 1 Release 3.1 February 2006 2006 Avaya Inc. All Rights Reserved. Notice While reasonable efforts were made to ensure
CM705B - Universal Expander Module CM707B - Plug On Zone Expander Security Systems
CM705B - Universal Expander Module CM707B - Plug On Zone Expander Security Systems EN Security System CM705B CM705B - Universal Expander Module The CM705B universal expander provides a cost effective way
How To Connect A Cell Phone To A Cell Network
Contents CHAPTER 1 INTRODUCTION OF IPS SYSTEM PG Introduction Welcome To Your BBS Telephone System 2 Technical Support 3 CHAPTER 2 INSTALLATION GUIDE Installing Your Tools / Equipment Needed 6 Phone System
T3 Mux M13 Multiplexer
T3 Mux M13 Multiplexer User Manual [Type the abstract of the document here. The abstract is typically a short summary of the contents of the document. Type the abstract of the document here. The abstract
An0067. Cable-set Reference Guide. Rev. 2.0 - December 2007 - ETH_An0067_USM20-2007- 12
An0067 Cable-set Reference Guide Rev. 2.0 - December 2007 - ETH_An0067_USM20-2007- 12 2 Introduction Disclaimer The information in this manual has been carefully checked and is believed to be accurate.
LTM-1338B. Plus Communications Manual
LTM-1338B Plus Communications Manual 2000. Best Power, Necedah, Wisconsin All rights reserved. Best Power The System Setup option from the Main Menu on the front panel is passwordprotected. The default
RC2200DK Demonstration Kit User Manual
Demonstration Kit User Manual Table of contents TABLE OF CONTENTS... 1 QUICK INTRODUCTION... 2 INTRODUCTION... 3 DEMONSTRATION BOARD... 4 POWER SUPPLY SECTION... 5 RS-232 INTERFACE... 6 CONNECTORS... 7
BIT COMMANDER. Serial RS232 / RS485 to Ethernet Converter
BIT COMMANDER Serial RS232 / RS485 to Ethernet Converter (Part US2000A) Copyrights U.S. Converters 1 Contents Overview and Features... 3 Functions..5 TCP Server Mode... 5 Httpd Client Mode.5 TCP Auto mode....6
VoIP MultiPath/Gateway Switch
Tenor DX VoIP MultiPath/Gateway Switch Product Guide P/N 480-0049-00-13 Tenor and Quintum are registered trademarks. PacketSaver, Quintum Technologies, Inc., Risk Free VoP, VoIP Made Easy, TASQ, SelectNet,
2100 POS System. 2100 User Guide
2100 POS System 2100 User Guide Thank you for selecting UTC RETAIL s innovative Model 2100 Point of Sale solution! This guide is designed to acquaint you with the features and functionality of the 2100
Active Speaker System LX523 AUDAC PROFESSIONAL AUDIO EQUIPMENT. Active Speaker System with remote input LX523. User Manual & Installation Guide
Active Speaker System LX523 AUDAC PROFESSIONAL AUDIO EQUIPMENT Active Speaker System with remote input LX523 User Manual & Installation Guide AUDAC PROFESSIONAL AUDIO EQUIPMENT User Manual & Installation
AT&T 555-021-101 Issue 3, February 1993. ISDN Installation and Test Manual
AT&T 555-021-101 Issue 3, February 1993 ISDN Installation and Test Manual 1 1993 AT&T All Rights Reserved Printed in USA Notice While reasonable effort was made to ensure that the information in this document
isco Connecting Routers Back to Back Through the AUX P
isco Connecting Routers Back to Back Through the AUX P Table of Contents Connecting Routers Back to Back Through the AUX Ports...1 Introduction...1 Before You Begin...1 Conventions...1 Prerequisites...1
USER GUIDE. Studio Hotline Multi-line System Phone Flasher and Door/Alert Indicator Input Module and Indicator. DM Engineering. Version 1.
USER GUIDE Studio Hotline Multi-line System Phone Flasher and Door/Alert Indicator Input Module and Indicator Version 1.3 DM Engineering 2174 Chandler St. Camarillo, CA 91345-4611 805-987-7881 800-249-0487
TECHNICAL. Now Every Call Center and Small Business Can Afford a Fully Featured Call Distributor ACD-10. Automatic Call Distributor
TECHNICAL Practice TELECOM SOLUTIS FOR THE 21ST CENTURY ACD-10 Automatic Call Distributor July 6, 2004 Features Stand-Alone Unit: Now Every Call Center and Small Business Can Afford a Fully Featured Call
Information Note Connecting a BRI - checklist
Information Note Connecting a BRI - checklist When connecting a Vega to a BRI device there are a number of steps that need to be followed in order to ensure that the link will come up and the system will
PRI (T1/E1) Call Recorder User Manual Rev 1.0 (December 2013)
PRI (T1/E1) Call Recorder User Manual Rev 1.0 (December 2013) 1. Call Recording Architecture Overview PRI Call recording solution consists of two major components: Passive T1/E1 Tap Adapter and server
EvB 5.1 v5 User s Guide
EvB 5.1 v5 User s Guide Page 1 Contents Introduction... 4 The EvB 5.1 v5 kit... 5 Power supply...6 Programmer s connector...7 USB Port... 8 RS485 Port...9 LED's...10 Pushbuttons... 11 Potentiometers and
One Port Serial Server Users Manual Model ESP901, ESP901E
One Port Serial Server Users Manual Model ESP901, ESP901E Documentation Number: ESP901-2303 International Headquarters B&B Electronics Mfg. Co. Inc. 707 Dayton Road -- P.O. Box 1040 -- Ottawa, IL 61350
ipdatatel Wi-Fi BAT Installation and Configuration Guide
ipdatatel Wi-Fi BAT Installation and Configuration Guide This guide is for customers who want install the ipdatatel equipment before their programming appointment. This guide covers installing the IPD-Wifi-BAT
RTEX Cable 2015/10/1. Motor Business Unit Automotive & Industrial Systems Company Panasonic Corporation
RTEX Cable 2015/10/1 Motor Business Unit Automotive & Industrial Systems Company Panasonic Corporation Cable and Connector Page 2 2015/10/1 Rev. 5 Motor Business Unit, AIS Company The Kind of Ethernet
LevelOne IFE-0500 4-Port PoE + 1-Port TP Industrial Fast Ethernet Switch User Manual
LevelOne IFE-0500 4-Port PoE + 1-Port TP Industrial Fast Ethernet Switch User Manual Ver. 1.0.0-0711 1 FCC Warning This Equipment has been tested and found to comply with the limits for a Class-A digital
iseries Ethernet cabling and configuration requirements
iseries Ethernet cabling and configuration requirements iseries Ethernet cabling and configuration requirements Copyright International Business Machines Corporation 1999, 2000. All rights reserved. US