FACC Operations GmbH. NonDestructive Testing
|
|
|
- Irma Cain
- 9 years ago
- Views:
Transcription
1 In accordance with SAE Aerospace Standard AS7003, to the revision in effect at the time of the audit,this certificate is granted and awarded by the authority of the Nadcap Management Council to: Fischerstrasse 9 Ried im Innkreis, A4910 This certificate demonstrates conformance and recognition of accreditation for specific services, as listed in on the Qualified Manufacturers List (QML), to the revision in effect at the time of the audit for: Certificate Number: Expiration Date: 31 October 2016 Joseph G. Pinto Vice President and Chief Operating Officer Performance Review Institute (PRI) 161 Thorn Hill Road Warrendale, PA
2 SCOPE OF ACCREDITATION Fischerstrasse 9 Ried im Innkreis, A4910 This certificate expiration is updated based on periodic audits. The current expiration date and scope of accreditation are listed at: - Online QML (Qualified Manufacturer Listing). In recognition of the successful completion of the PRI evaluation process, accreditation is granted to this facility to perform the following: AC7114 Rev G - Nadcap Audit Criteria for (NDT) Suppliers Accreditation AC7114S Rev I - Nadcap Supplemental Audit Criteria for (NDT) Suppliers Accreditation Program S U2 Pratt and Whitney S U3 Rolls Royce PLC S U5 Eurocopter AC7114/3 Rev H - Nadcap Audit Criteria for Facility Ultrasonic Survey AC7114/3S Rev I - Nadcap Supplemental Audit Criteria for Facility Ultrasonic Survey S U2 Pratt and Whitney S U3 Rolls Royce PLC S U5 Eurocopter t-frm-17 (17-Jun-10)
3 In accordance with SAE Aerospace Standard AS7003, to the revision in effect at the time of the audit,this certificate is granted and awarded by the authority of the Nadcap Management Council to: Kammer 32 Ort Im Innkreis, A4974 This certificate demonstrates conformance and recognition of accreditation for specific services, as listed in on the Qualified Manufacturers List (QML), to the revision in effect at the time of the audit for: Certificate Number: Expiration Date: 31 October 2016 Joseph G. Pinto Vice President and Chief Operating Officer Performance Review Institute (PRI) 161 Thorn Hill Road Warrendale, PA
4 SCOPE OF ACCREDITATION Kammer 32 Ort Im Innkreis, A4974 This certificate expiration is updated based on periodic audits. The current expiration date and scope of accreditation are listed at: - Online QML (Qualified Manufacturer Listing). In recognition of the successful completion of the PRI evaluation process, accreditation is granted to this facility to perform the following: AC7114 Rev G - Nadcap Audit Criteria for (NDT) Suppliers Accreditation AC7114S Rev I - Nadcap Supplemental Audit Criteria for (NDT) Suppliers Accreditation Program AC7114/3 Rev H - Nadcap Audit Criteria for Facility Ultrasonic Survey AC7114/3S Rev I - Nadcap Supplemental Audit Criteria for Facility Ultrasonic Survey t-frm-17 (17-Jun-10)
5 In accordance with SAE Aerospace Standard AS7003, to the revision in effect at the time of the audit,this certificate is granted and awarded by the authority of the Nadcap Management Council to: Industriegebiet Kammer 37 Reichersberg, A4981 This certificate demonstrates conformance and recognition of accreditation for specific services, as listed in on the Qualified Manufacturers List (QML), to the revision in effect at the time of the audit for: Certificate Number: Expiration Date: 31 October 2016 Joseph G. Pinto Vice President and Chief Operating Officer Performance Review Institute (PRI) 161 Thorn Hill Road Warrendale, PA
6 SCOPE OF ACCREDITATION Industriegebiet Kammer 37 Reichersberg, A4981 This certificate expiration is updated based on periodic audits. The current expiration date and scope of accreditation are listed at: - Online QML (Qualified Manufacturer Listing). In recognition of the successful completion of the PRI evaluation process, accreditation is granted to this facility to perform the following: AC7114 Rev G - Nadcap Audit Criteria for (NDT) Suppliers Accreditation AC7114S Rev I - Nadcap Supplemental Audit Criteria for (NDT) Suppliers Accreditation Program S U19 Triumph/Vought AC7114/3 Rev H - Nadcap Audit Criteria for Facility Ultrasonic Survey AC7114/3S Rev I - Nadcap Supplemental Audit Criteria for Facility Ultrasonic Survey S U19 Triumph/Vought t-frm-17 (17-Jun-10)
Tata Steel UK Limited. NonDestructive Testing
In accordance with SAE Aerospace Standard AS7003, to the revision in effect at the time of the audit,this certificate is granted and awarded by the authority of the Nadcap Management Council to: Stocksbridge
X-R-I Testing. NonDestructive Testing
In accordance with SAE Aerospace Standard AS7003, to the revision in effect at the time of the audit,this certificate is granted and awarded by the authority of the Nadcap Management Council to: 700 N
BUSINESS AND QUALITY SYSTEMS SELF SURVEY
BUSINESS AND QUALITY SYSTEMS SELF SURVEY Company Location and Contact Information: Company Name: Mailing address: County: C.I.L. Inc. 400 Canal Street, Lawrence, MA 01840 Essex Phone Number: (978) 685
Re-Authentication Guide
AQMS AUDITOR AUTHENTICATION BODY Re-Authentication Guide This document contains guidance for completing the AQMS Auditor Re- Authentication process for individuals currently holding an AQMS Auditor Authentication
Supplier Quality Assurance Requirements Manual
12716 EAST PINE STREET TULSA, OK 74116 Supplier Quality Assurance Requirements Manual Approved: Mike Collins Quality Assurance Manager Precise Machining & Manufacturing 1 Record of Revisions Revision D
The Future of Supply Chain Management: What the Medtech Industry Can Learn from the Aerospace Industry?
The Future of Supply Chain Management: What the Medtech Industry Can Learn from the Aerospace Industry? 26 June 2013 Joseph G Pinto Executive Vice-President & COO Performance Review Institute 1 Today s
Certificate of Registration. Kirkhill Aircraft Parts Co (Kapco Global) 3120 E. Enterprise Street Brea, California, 92821, United States
Certificate of Registration This certifies that the Quality Management System of has been assessed by NSF-ISR and found to be in conformance to the following standard(s): AS9100C *Audited in accordance
Electronics Task Group Newsletter
Electronics Task Group Newsletter July 2008 Issue Highlights From the Chair and Vice Chair... 1 Nadcap Meeting Schedule... 2 From eauditnet Support... 2 Document Location... 2 Upcoming equalearn Event...
Cessna - Interiors Manufacturing Facility (IMF) Supplier Quality System Requirements
Cessna - Interiors Manufacturing Facility (IMF) Supplier Quality System Requirements Wichita KS Effective: 3-11-15 Rev. IR Page 1 of 6 1.0 Introduction This document establishes Cessna Interiors Manufacturing
Boeing Commercial Airplanes Supply Management Procurement Quality Assurance Field Operations. Welcome to the Quality Information Workshop
Boeing Commercial Airplanes Supply Management Procurement Quality Assurance Field Operations Welcome to the Quality Information Workshop 1 Boeing Commercial Airplanes Supply Management Procurement Quality
Supplier Quality System Requirements
Page 1 of 18 TITLE Supplier Quality System Requirements WARNING This document is the property of United Technologies Corporation (UTC). You may not possess, use, copy or disclose this document or any information
AEROSPACE QUALITY MANAGEMENT SYSTEM STANDARDS - AS 9100 SERIES., 28/1/2005 S.Lichtenstein 1
AEROSPACE QUALITY MANAGEMENT SYSTEM STANDARDS - AS 9100 SERIES ליכטנשטיין שלמה מנהל ניהול האיכות במטה התעשייה האווירית בע"ממ יוו"ר מגזר תעשיות ביטחוניות תעופה וחלל באיגוד הישראלי לאיכות, 28/1/2005 S.Lichtenstein
AS9100 B to C Revision
AS9100 B to C Revision Key: Additions Deletions Clarifications 1.2 Application AS9100C Key Additions This standard is intended for use by organizations that design, develop and/or produce aviation, space
What you need to know about Nadcap
What you need to know about Nadcap Contents Welcome Letter from the Supplier Support Committee Chairperson 3 Nadcap Overview & Organization Structure 4 Nadcap Supplier Support Committee 6 Special Processes,
Standard Practice for Quality Control Systems for Nondestructive Testing Agencies 1
Designation: E 1212 99 AMERICAN SOCIETY FOR TESTING AND MATERIALS 100 Barr Harbor Dr., West Conshohocken, PA 19428 Reprinted from the Annual Book of ASTM Standards. Copyright ASTM Standard Practice for
AEROSPACE QUALITY MANAGEMENT SYSTEM - 9100
AEROSPACE QUALITY MANAGEMENT SYSTEM - 9100 Dale K. Gordon Rolls-Royce Royce North America Past Chairman Americas Aerospace Quality Group April 11th, 2003 Edinburgh General Assembly 1 of 24 Aerospace Quality
Sargent Controls & Aerospace 5675 West Burlingame Rd. Tucson AZ 85743 PHONE: (520) 744-1000 FAX: (520) 744-8054
Sargent Controls & Aerospace 5675 West Burlingame Rd. Tucson AZ 85743 PHONE: (520) 744-1000 FAX: (520) 744-8054 SUPPLIER EVALUATION CHECKLIST Date: Vendor: Address: City, State, Zip: Web Site: Prepared
INTRODUCTION: PURPOSE:
UMBRA CUSCINETTI, INC. 2916 100 th Street SW Everett, WA 98204-1340 USA 425-743-2577 FAX: 425-347-0682 Printed versions may not be the latest. Suppliers shall utilize the latest version which can be found
GARDNER AEROSPACE SUPPLIER QUALITY REQUIREMENTS MANUAL
GARDNER AEROSPACE SUPPLIER QUALITY REQUIREMENTS MANUAL Issue Number: 1 Issue Date: 12/9/14 1 of 19 Contents Revision Summary... 4 1.0 Introduction... 5 2.0 Supplier Quality System Requirements... 6 3.0
Non-Destructive Testing Newsletter
N S Non-Destructive Testing Newsletter July 2008 Issue Highlights From the Chair...1 Nadcap Meeting Schedule...1 NDT Newsletter Want to be on Circulation?...2 Responsible Level 3...2 New Procedures...2
STAREGISTER INTERNATIONAL INC 250 NORTH WASHTENAW AVENUE CHICAGO, ILLINOIS 60612
This is to signify that STAREGISTER INTERNATIONAL INC 250 NORTH WASHTENAW AVENUE CHICAGO, ILLINOIS 60612 Management System Certification Body MSCB-107 has met the International Accreditation Service (IAS)
Supplier Quality Assurance Requirements Manual
1701 West Tacoma Broken Arrow, Ok. 74012 Supplier Quality Assurance Requirements Manual Approved: Bryan Sanderlin President/COO/CEO OSECO, Inc. Darrel Bilke Quality Assurance Manager OSECO, Inc. 1 Record
Prerequisite: Review of the ISO 9001-2008 Standard prior to attendance is strongly suggested. Bring a copy to the training class.
2 DAY ISO 9001-2008 *INCLUDES SPECIFIC ASPECTS OF ISO 9001-2015* INTERNAL AUDITOR TRAINING 2015 Course Offering Description: This program is designed to develop internal quality management systems auditing
Comment Form for Industry Review of NAS 410, Rev 4 - Draft 1-2010+
Comment Form for Industry Review of NAS 410, Rev 4 - Draft 1-2010+ PLEASE PROVIDE THE FOLLOWING INFORMATION FOR EACH PERSON PROVIDING COMMENTS: Reviewer's Name: COSAC Company/Organization: FRENCH NANDTB
Change Notice Revision 2 adds a definition of NANDTB, and acceptance of the National Aerospace NDT Board of Australia.
Advisory Circular AC43-8 Revision 2 Non-destructive Testing 27 February 2015 General Civil Aviation Authority advisory circulars contain information about standards, practices, and procedures that the
Aerospace & Defence Acceleration Programme & Technology. ADAPT...to secure market opportunities
Aerospace & Defence Acceleration Programme & Technology ADAPT...to secure market opportunities AeroDNA supports ambitious companies to establish world class aerospace infrastructure in established & emerging
Introduction to AS 9100
Introduction to AS 9100 Rev. C 1 Questions we will cover today: What is AS9100? What does a company need to do to Register to AS9100 Rev C? What are the requirements? Section 4 General Requirements Section
QUALITY MANAGEMENT SYSTEM FOR THE AEROSPACE INDUSTRY
I International Symposium Engineering Management And Competitiveness 2011 (EMC2011) June 24-25, 2011, Zrenjanin, Serbia QUALITY MANAGEMENT SYSTEM FOR THE AEROSPACE INDUSTRY Branislav Tomić * Senior Quality
The World Nuclear Supply
The World Nuclear Supply Chain An Overview Greg KASER Staff Director NEA International WPNE Workshop Paris 11 March 2014 Outline of Presentation 1. About WNA 2. Value of: New construction Early dismantlement
QUALITY & TECHNICAL CERTIFICATIONS
QUALITY & TECHNICAL CERTIFICATIONS October 2015 ODIN Underwater Inspection in Lieu of Drydocking I am writing in regard to the EM&I ODIN System for Underwater Inspection in Lieu of Drydocking. ABS has
Reliable Flaw Detection. Fast Inspection Times. High quality non-destructive testing services tailored for all your needs. www.tuv.
INDUSTRIAL SERVICES - NON-DESTRUCTIVE TESTING Reliable Flaw Detection. Fast Inspection Times. High quality non-destructive testing services tailored for all your needs. www.tuv.com/ndt The reliability
An Act. SUBJECT: Oklahoma Professional Employer Organization Recognition and Registration Act
An Act ENROLLED HOUSE BILL NO. 2446 By: Quinn of the House and Brinkley of the Senate An Act relating to labor; amending 40 O.S. 2011, Section 600.4, which relates to renewal of registration by professional
INTEGRATED MANAGEMENT SYSTEMS AUDITS: INTERNAL AUDIT TOOL *
INTEGRATED MANAGEMENT SYSTEMS AUDITS: INTERNAL AUDIT TOOL * Denis Bourcier, Ph.D. VP, Quality and Regulatory Compliance Avchem, Inc St. Louis, MO Co-authors: Larry Tibert EH&S Business Manager National
SGS WHEN YOU NEED TO BE SURE
SGS WHEN YOU NEED TO BE SURE FOR MANUFACTURERS, SUPPLIERS AND OPERATORS Aviation is one of the most exciting industries in the world and also one of the safest, guaranteed by the highest standards of quality,
Reliable. Innovative. Accessible. Your life cycle support partner.
Reliable. Innovative. Accessible. Your life cycle support partner. Our strategic focus on innovation and operational excellence combined with our long-standing experience with defence forces around the
When printed the document is for reference only and is considered uncontrolled - refer to the Document Control System for the most current version
QM-1 SUPPLEMENT QUALITY MANAGEMENT SYSTEMS MANUAL Revision 6 Page: 1 of 6 APPROVED BY: TITLE DATE Electronic Signature on file Quality Director 10/3/15 D. Picciotti Page: 2 of 6 DOCUMENT REVISION HISTORY
Non-Destructive Test (NDT) and Non-Destructive Evaluation (NDE) Requirements
Table of Contents 1.0 Purpose/Scope/Timing... 2 1.1 Scope... 2 1.2 Communication... 2 1.3 Compliance Date... 2 2.0 Procedure / Quality Recd Requirements... 2 2.1 General Requirements... 2 2.2 Requirements
Quality Requirements for Suppliers
ESC9100 Rev D Quality Requirements for Suppliers This document is the property of The United Technologies Aerospace Corporation and is loaned with the understanding that neither this document, nor any
How To Ensure Quality Assurance
1001 Robb Hill Road Oakdale, PA 15071-3200 412/923-2670 PROCUREMENT SPECIFICATION: SUPPLIER QUALITY MANAGEMENT SYSTEM REQUIREMENTS Specification Number: ATI-QA-703, Rev 4 Date: 11/12/13 Page: 1 of 7 Written
Foreword... 11 Introduction - The Global Food Safety Initiative (GFSI)... 11 Scope... 12 Section Overview... 12 Normative References...
Version 6.3 Overview Contents Foreword... 11 Introduction - The Global Food Safety Initiative (GFSI)... 11 Scope... 12 Section Overview... 12 Normative References... 13 9 Foreword Global Food Safety Initiative
Pressure Control Supplier Quality Requirements Nondestructive Testing Services SQ-10 Rev: 1.1
Approved By: Jerry Longmire Vice President - Quality Jim Harris Quality Leader - NAM Document Revision Chart The following chart lists the revisions made to this document tracked by version. Use this to
NABL accreditation is a formal recognition of the technical competence of a medical testing laboratory
NABL accreditation is a formal recognition of the technical competence of a medical testing laboratory Third party assessment NABL has Mutual Recognition Arrangement with APLAC and ILAC NABL accredited
SUPPORTING THE RAIL INDUSTRY UNIQUE SOLUTIONS FOR UNIQUE SITUATIONS WWW.SGS.COM/RAIL
SUPPORTING THE RAIL INDUSTRY UNIQUE SOLUTIONS FOR UNIQUE SITUATIONS WWW.SGS.COM/RAIL OUR UNIQUE SOLUTION TO YOUR UNIQUE SITUATION SGS is recognised as the global benchmark for quality and integrity. We
This is to signify that
This is to signify that TQA ULUSLARARASI BELGELENDIRME TEKNIK KONTROL EĞITIM İÇ VE DIŞ TIC. LTD. ŞTI. FERHUNİYE MH. SULTANŞAH CD. BELEDİYE İŞHANI NO: 46/22 SELÇUKLU, KONYA TÜRKİYE Management System Certification
RG 7 Accreditation for Inspection Bodies Performing Non-Destructive Testing
This publication contains policy, recommendations and guidance applicable to UKAS accredited inspection bodies RG 7 Accreditation for Inspection Bodies Performing Non-Destructive Testing Contents Section
REFERENTIEL- SODERN. Autre référence / Other reference :
Classification: NC Page : 1/8 Autre référence / Other reference : Type: Sector procedureprocédure sectorielle. Description: Exigences qualité pour les fournisseurs de Sodern version anglaise / Quality
Wilfred C. LaRochelle Principal Nuclear Consultant HSB Global Standards, USA
Wilfred C. LaRochelle Principal Nuclear Consultant HSB Global Standards, USA ASME Vice President, Conformity Assessment and Vice Chairman of Committee on Nuclear Certification 2nd NRC Workshop on Vendor
Plan QAQ-82-001 Supplier Quality Requirements (Rev 10)
1.0 Purpose To outline Insitu s quality management system requirements for suppliers. 2.0 Scope This document applies to suppliers and subcontractors that provide products and/or services that affect the
Aerospace Guidance Document
Aerospace Guidance Document Introduction AS9100, AS9110 and AS9120 all include ISO 9001:2008 registration and specify additional requirements for a quality management system for the aerospace industry.
The following slides are not contractual in nature and are for information purposes only as of June 2015.
The following slides are not contractual in nature and are for information purposes only as of June 2015. 2015, Lockheed Martin Corporation. All Rights Reserved. 1 Corrective Action Webinar Lesson 1 -
APPLICATION FOR CAR 145/CAR M SUBPART F APPROVAL Form No.: AWF-AMO-001
Please refer to Appendix 1 for Instructions to fill this form and Appendix 2 for GCAA application requirements: 1. Name of Organization : 2. Address(es) for which approval is sought/held: (a) Physical
SUPPLIER QUALITY SYSTEM AUDIT
Company Name: Date: Company Address: Quality Assurance Mgr: President: Number of employees: Is your company receptive to source inspection? List all standards the quality system is based on Web Page: Company
Improved Performance through the use of Defined Metrics. by Penny Dennehy The Boeing Company
Improved Performance through the use of Defined Metrics by Penny Dennehy The Boeing Company Background Airline metrics exist today (DAL, AAL, UAL, JAL, GECAS, CAL, KLM, UPS, FedEx, BAB, etc..) Initiatives
Helical Products Co., Inc.
Q01 GENERAL REQUIREMENTS 1. Supplier Responsibilities 1.1. Delivery Certification By delivering products or services on the Contract, the Supplier certifies that such products or services are in compliance
Purchase Order Attachment 1600 Revision 02 June-2006. Raytheon Aircraft Company Supplier Quality Requirements Document
Purchase Order Attachment 1600 Revision 02 June-2006 Raytheon Aircraft Company Supplier Quality Requirements Document Issued by: Raytheon Aircraft Company Supply Chain Management Quality Assurance 101
EXCEEDING YOUR EXPECTATIONS
www.labtesting.com EXCEEDING YOUR EXPECTATIONS with quality, service and delivery Materials Testing Nondestructive Testing Failure Analysis Specimen Machining LTI FOR ALL OF YOUR TESTING AND SPECIMEN MACHINING
STATE OF OKLAHOMA. 2nd Session of the 53rd Legislature (2012) COMMITTEE SUBSTITUTE
STATE OF OKLAHOMA nd Session of the rd Legislature () COMMITTEE SUBSTITUTE FOR HOUSE BILL NO. By: Quinn COMMITTEE SUBSTITUTE An Act relating to labor; amending 0 O.S., Section 00., which relates to renewal
You count on availability. We provide reliable solutions.
You count on availability. We provide reliable solutions. Your global partner for military aviation Customers around the globe are faced with challenges every day, including increased demands on fleet
Product Order Quality Requirements Meggitt (Orange County), Inc.
Product Order Quality Requirements Meggitt (Orange County), Inc. Reference QP8-051, Purchase Order Quality Requirements QP8-055, Review/Control Supplier Documentation PP-401, Quality Assurance Codes 50-2-351,
Quality Management System. Manual
Quality Manual ISO 9001 Quality Approved by: JTH Page 1 of 7 Introduction The adoption of a Quality is a strategic decision of an organization. Industrial Scale Ltd. has instituted a formal Quality as
CLARK COUNTY DEPARTMENT OF BUILDING & FIRE PREVENTION 4701 W. Russell Road Las Vegas, NV 89118 (702) 455-3000 Fax (702) 221-0630
CLARK COUNTY DEPARTMENT OF BUILDING & FIRE PREVENTION 4701 W. Russell Road Las Vegas, NV 89118 (702) 455-3000 Fax (702) 221-0630 Ronald L. Lynn, Director/Building & Fire Official Samuel D. Palmer, P.E.,
QUALITY MANUAL ISO 9001:2008
QUALITY MANUAL ISO 9001:2008 KRAFT EMS Enterprise management Quality management system PM Organisation Environmental management system Policies Objectives HRM MMM HWS Economy manual Document control
Composite Program in Taiwan Aviation Industry and Areas of Interest(s)
Composite Program in Taiwan Aviation Industry and Areas of Interest(s) Eric Chen Initial Airworthiness Section CAA of Taiwan Singapore, September 3, 2015 Outline 2 CAA Flight Standards Division (FSD) Introduction
GLOBAL AEROSPACE PROCEDURE
1 of 13 1. PURPOSE: This procedure establishes the minimum PPG Aerospace requirements for a Supplier's Quality Plan. These requirements pertain to the documentation and inspection/testing necessary to
PIONNIER Consulting Services Research. Consulting. Outsourcing www.pionnierllc.com
2012 PIONNIER Consulting Services Research. Consulting. Outsourcing www.pionnierllc.com PIONNIER Consulting Services Founded in 2009, PIONNIER Consulting Services operates as a research, consulting and
Failure Trend Alert - Missing Revisions on Certificate on Conformance (C of C)
Dear Valued Partner: In our continued journey to assist our supplier partners, Raytheon IDS will be expanding the new program to proactively communicate failure trend concerns to our supplier partners.
INTRODUCTION TO ISO 9001 REVISION - COMMITTEE DRAFT
INTRODUCTION TO ISO 9001 REVISION - COMMITTEE DRAFT AGENDA Introduction Annex SL Changes to ISO 9001 Future Development How SGS can support you 2 INTRODUCTION ISO 9001 Revision Committee Draft Issued 2013
TITLE: Control of Software
Page 1 of 8 TITLE: Control of Software WARNING This document is the property of United Technologies Corporation (UTC). You may not possess, use, copy or disclose this document or any information in it,
ENTERPRISE. - David L. Olson University of Nebraska, USA. Desheng Dash Wu University of Toronto, Canada. World Scientific
Financial Engineering and Risk Management Vol.1 ' ENTERPRISE T - David L. Olson University of Nebraska, USA Desheng Dash Wu University of Toronto, Canada World Scientific NEW JERSEY LONDON SINGAPORE BEIJING
21 st Century Supply Chains (SC21) & BAE Systems Strategic Supply Chain Management
Harnessing Innovation 21 st Century Supply Chains (SC21) & BAE Systems Strategic Supply Chain Management Mike Webb 5 th June 2007 Customer Environment Customers are demanding increasing levels of Performance
IAQG AS 9104 System Process Flowcharts
IAQG AS 9104 System Process Flowcharts IAQG AS9104 Overview of Requirements Value Stream Customer Requirements (IAQG OEM) Design & Development Manufacture Maintenance Customer Satisfaction Voluntary Certification/Registration
GST-15_Bad Debt. What is 6 Months Bad Debt Relief?
GST-15_Bad Debt What is 6 Months Bad Debt Relief? A GST registered business can claim bad debt relief (GST Tax amount paid earlier to Kastam) if they have not received any payment or part of the payment
DEFENCE INSTRUCTIONS (GENERAL)
DEFENCE INSTRUCTIONS (GENERAL) New instruction 0 LOG 4 5 012 Regulation of technical integrity of Australian Defence Force materiel Department of Defence CANBERRA ACT 2600 10 September 2010 Issued with
AS9100 Clause 7.4.1 Purchasing Process and
The Elsmar Cove Forum (http://elsmar.com/forums/index.php) - AS9100, Nadcap and related Aerospace Standards and Requirements (http://elsmar.com/forums /forumdisplay.php?f=95) - - AS9100 Clause 7.4.1 Purchasing
1 SUBJECT AND FIELD OF APPLICATION... 1 2 SPECIAL RULES CERTIFICATION ACCORDING TO THE STANDARDS EN 9100 EN 9110 EN 9120... 1
1 SUBJECT AND FIELD OF APPLICATION... 1 2 SPECIAL RULES CERTIFICATION ACCORDING TO THE STANDARDS EN 9100 EN 9110 EN 9120... 1 1 SUBJECT AND FIELD OF APPLICATION This document constitutes the special regulations
Trimble Navigation Limited (NasdaqGS:TRMB) > Public Ownership > Officials' Trading
Trimble Navigation Limited (NasdaqGS:TRMB) > Public Ownership > Officials' Trading Individual Trades Holder Name Trade Date Range Transacted Shares Transaction Value (USD) Transaction Type Price Range
3.1 It is the responsibility of the Supplier to obtain current copies of non UTC documents noted below at www.sae.org.
Date: 1 of 21 TITLE UTC Production Part Approval Process (UPPAP) WARNING This document is the property of United Technologies Corporation (UTC). You may not possess, use, copy or disclose this document
Non Destructive Testing Consultancy Welding Materials Testing Training
Non Destructive Testing Consultancy Welding Materials Testing Training Introduction Applied Inspection is an ISO 9001:2008 and Link-Up accredited company providing non-destructive testing and training,
IAS ACCREDITED INSPECTION AGENCIES: GUIDELINES FOR CONDUCTING INTERNAL AUDITS AND MANAGEMENT REVIEWS. Revised January, 2016
IAS ACCREDITED INSPECTION AGENCIES: GUIDELINES FOR CONDUCTING INTERNAL AUDITS AND MANAGEMENT REVIEWS Revised January, 2016 IAS has found that inspection agency personnel are often confused by the requirements
UNOPS International Public Sector Accounting Standards (IPSAS) Implementation Programme
UNOPS International Public Sector Accounting Standards (IPSAS) Implementation Programme This IPSAS briefing document provides an overview of why IPSAS is being implemented at UNOPS, how this process is
EN 4179/NAS 410 Interpretation
EN 4179/NAS 410 Interpretation The NANDTB has adopted NAS 410 / EN 4179 in lieu of AS 3669 as the standard for the qualification and approval of NDT technicians. Employers applying these standards sometimes
AS9100C Revised Standard Improves Aerospace Quality
AS9100C Revised Standard Improves Aerospace Quality Customer satisfaction is one of the newest changes to the international quality management standard for aerospace. By Christian Lupo, Business Unit Manager
Requirements to be an Aerospace Supplier
Requirements to be an Aerospace Supplier 5 th PE COI Annual Conference 11/04/2013 2013 Rolls-Royce plc The information in this document is the property of Rolls-Royce plc and may not be copied or communicated
An Alternative Method for Maintaining ISO 9001/2/3 Certification / Registration
International Accreditation Forum, Inc. An Alternative Method for Maintaining ISO 9001/2/3 Certification / Registration A Discussion Paper The International Accreditation Forum, Inc. (IAF) operates a program
Hire the Best. Recruitment Brand Awareness Corporate Recognition
Recruitment Brand Awareness Corporate Recognition 2016 SAE Collegiate Design Series ships Hire the Best Finding the brightest, most promising engineering students for your organization can be time consuming
UK National Aerospace NDT Board
UK National Aerospace NDT Board c/o The British Institute of NDT Newton Building, St George s Avenue Northampton, NN2 6JB United Kingdom Tel: +44 (0)1604-893-811 Fax: +44 (0)1604-893-868 E-mail: [email protected]
ISO 20000 Information Technology Service Management Systems Professional
ISO 20000 Information Technology Service Management Systems Professional Professional Certifications Sample Questions 1. You work as an external consultant to an IT department that plans to demonstrate
Howmet Aluminum Casting. Responding to your needs for high-quality aluminum investment castings
Howmet Aluminum Casting Responding to your needs for high-quality aluminum investment castings You want quality aluminum investment castings Howmet Aluminum Casting has manufacturing facilities in three
SUPPLIER QUALITY REQUIREMENTS MANUAL
SUPPLIER QUALITY MANUAL This Document is the exclusive property of Airbus Helicopters, Inc. and the reproduction of this document without written authorization is strictly forbidden. Airbus Helicopters,
2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES
2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES DIRECT ACTING Brochure N-289 SPECIFICATIONS Port Size: 1/8 and1/4 Solenoid Valve for air, oil, water and other fluids Flow Direction: