NCC Blade Network Communication Controller

Transcription

1

2 In order to suit the permanent need of POS networking around the world, Ingenico has designed the (NCC). NCC can be used as LAN Controller Transaction router Dial-up POS concentrator NCC modular design offers enough flexibility to respond efficiently to customer needs. It is fully programmable and easily customisable for networking and banking requirements. SPECIFICATIONS 435x312x174 mm (4U Standard). Single or Dual power supply (in option). 13 Slots EUROCARD for CPU004 cards. 1 Slot for the Management Blade. 1 RS232 and 2 RJ45s connectors by slot. Fast Ethernet Backplane. Power Supply: v 5-3A Max Output: 120W on +5v/+3v. CE Approval (EN55022 EN55024 Security IEC60950) Operating temperature : 0 C to +50 C Storage temperature : -20 C to +80 C Humidity : 5% to 95 % non condensing. NCC is manufactured by Ingenico s telecommunication business Unit. This unit designs and manufactures complete end-to-end data communication solutions for industrial markets. Ingenico s telecom business unit offers a wide range of products, which includes communication gateways and communication adapter boards. Our family of embedded solutions allows OEMs to rapidly integrate a variety of communication functions as IP connectivity into any product platform. Ingenico invests in leading-edge technologies and leverages its experience in point of sale communications to offer easy to implement, cost effective and reliable telecommunication solutions. At the same time this addresses the connectivity and security requirements for dial up and wireless remote access.

3 CPU004 Board

4 CPU004 Board An NCC consists a number of processors; cooperating in a multiprocessor system, and together achieves a desired function. CPU004 is the heart of the NCC Blade system. A majority of legacy concentrators of the market are still routing their transactions through RS485 bus and 10Mb/s Ethernet Links. INGENICO goes beyond by providing a more powerful, innovative and scalable solution ready to handle transactions, data download and new services attached to the POS world of today. CPU004 processor board added to one specific interface board (PSTN Blade, E1 Blade) is able to route the POS transaction through the two internal high speed 100Mb/s Ethernet Switches of the chassis. SPECIFICATIONS Intel IXP420 processor cadenced at 266MHz. 32 Mb of RAM and 32 Mb of Flash. Double integrated Ethernet 100BaseT interface. Eurocard format with DIN 96 backplane connector. Console with RJ interface for direct maintenance. PC104 Plus interface for specific daughter boards. Embedded Linux Operating system (2.6 Kernel µclibc ). INGENICO IngeNet Library support. Minimum Time Before Failure: hours at 25 C. CE Approval ( EN55022 EN55024 Security IEC60950) NCC is manufactured by Ingenico s telecommunication business Unit. This unit designs and manufactures complete end-to-end data communication solutions for industrial markets. Ingenico s telecom business unit offers a wide range of products, which includes communication gateways and communication adapter boards. Our family of embedded solutions allows OEMs to rapidly integrate a variety of communication functions as IP connectivity into any product platform. Ingenico invests in leading-edge technologies and leverages its experience in point of sale communications to offer easy to implement, cost effective and reliable telecommunication solutions. At the same time this addresses the connectivity and security requirements for dial up and wireless remote access.

5 E1/T1 Blade

6 E1/T1 Blade E1/T1 Blade is the next generation of ISDN PRI card for NCC Blade. It is a set on two CPU004 boards connected each to a PC104plus board: an E1/T1 Framer plus 16 modems and an additional 16modem. This ensures handling up to 6 E1/T1 lines in one single NCC Blade chassis. E1/T1 Blade key features ISDN E1 or T1 support with CCS framing From V21 (300 bps) up to V34 (33600 bps) modulation speed HDLC, Async8, Async7(VISAII) support PPP support with PAP, CHAP, MS CHAP, MS CHAPv2 authentication Full transparent mode support Caller ID support SPECIFICATIONS Framer chip based on Infineon PEF2256 RJ45 physical nterface Coding : CRC4, AMI, HDB3, B8ZS Supported PRI : NI1, NI2, EuroISDN, 4ESS (AT&T), 5ESS (Lucent), DMS100, Q SIG Line Built Out control Called ID Q931 management Minimum Time Before Failure: hours at 25 C. CE Approval ( EN55022 EN55024 Security IEC60950) NCC is manufactured by Ingenico s telecommunication business Unit. This unit designs and manufactures complete end-to-end data communication solutions for industrial markets. Ingenico s telecom business unit offers a wide range of products, which includes communication gateways and communication adapter boards. Our family of embedded solutions allows OEMs to rapidly integrate a variety of communication functions as IP connectivity into any product platform. Ingenico invests in leading-edge technologies and leverages its experience in point of sale communications to offer easy to implement, cost effective and reliable telecommunication solutions. At the same time this addresses the connectivity and security requirements for dial up and wireless remote access.

7 IP Blade

8 IP Blade IP Blade is a single CPU004 board dedicated to receive connections from any IP Based POS (Ethernet or GPRS). IP Blade can be a Downlink or an Uplink card, depending on software configuration. A majority of legacy concentrators of the market are still routing their IP transactions through 10Mb/s Ethernet Links. INGENICO goes beyond by providing a 100 Mb/s Ethernet link to handle transactions, data download and new services attached to the POS world of today faster. Along with fast Ethernet links, IP Blade gives also security by having SSLv3/TLS1 feature. This confers SSL gateway capabilities to NCC Blade. SPECIFICATIONS Double integrated Ethernet 100BaseT interface Up to 250 simultaneous connections Embedded firewall Embedded NAT/PAT routing capabilities Embedded SSLv1/TLSv1 gateway Specific Ethernet cable for stronger connectivity Minimum Time Before Failure: hours at 25 C. CE Approval ( EN55022 EN55024 Security IEC60950) NCC is manufactured by Ingenico s telecommunication business Unit. This unit designs and manufactures complete end-to-end data communication solutions for industrial markets. Ingenico s telecom business unit offers a wide range of products, which includes communication gateways and communication adapter boards. Our family of embedded solutions allows OEMs to rapidly integrate a variety of communication functions as IP connectivity into any product platform. Ingenico invests in leading-edge technologies and leverages its experience in point of sale communications to offer easy to implement, cost effective and reliable telecommunication solutions. At the same time this addresses the connectivity and security requirements for dial up and wireless remote access.

9 Management Blade

10 Management Blade Management Board is the main board that handles all the TCP/IP connection to the HOST (Main uplink board). Management Board key features Up to 250 simultaneous transactions per Host/Switch connection Embedded Firewall Embedded NAT/PAT routing capabilities Remote administration through Telnet, SSH and N.M.S. (Network Management System) Built in monitoring tool (CS_SYSTEM). Interconnection of N.C.C. via V.P.N. SPECIFICATIONS Intel IXP420 processor cadenced at 266MHz. 32 Mb of RAM and 32 Mb of Flash. Double integrated Ethernet 100BaseT interface. Eurocard format with DIN 96 backplane connector. Console with RJ interface for direct maintenance. PC104 Plus interface for specific daughter boards. Embedded Linux Operating system (2.6 Kernel µclibc ). INGENICO IngeNet Library support. Minimum Time Before Failure: hours at 25 C. CE Approval ( EN55022 EN55024 Security IEC60950) NCC is manufactured by Ingenico s telecommunication business Unit. This unit designs and manufactures complete end-to-end data communication solutions for industrial markets. Ingenico s telecom business unit offers a wide range of products, which includes communication gateways and communication adapter boards. Our family of embedded solutions allows OEMs to rapidly integrate a variety of communication functions as IP connectivity into any product platform. Ingenico invests in leading-edge technologies and leverages its experience in point of sale communications to offer easy to implement, cost effective and reliable telecommunication solutions. At the same time this addresses the connectivity and security requirements for dial up and wireless remote access.

11 PSTN Blade

12 PSTN Blade is the next generation of Dual Modem card for NCC Blade. It is a CPU004 board connected to a PC104plus PSTN Board. Each modem chipset is identical to the one built into Ingenico i5100 POS. This ensures full hardware compatibility with this type of POS. PSTN Blade key features From V21 (300 bps) up to V34 (33600 bps) modulation speed HDLC, Async8, Async7(VISAII) support PPP support with PAP, CHAP, MS CHAP, MS CHAPv2 authentication Full transparent mode support Caller ID support PSTN Blade SPECIFICATIONS Command set includes common Hayes/legacy and V.250 AT$Fn fast connect commands for POS applications On hook Caller ID Type I decoding FSK decoder for Bell 202/V.23 Line reversal detection Call Waiting Caller ID (CWCID) Type II decoding Standard DTMF tone dialling generation Worldwide DC Mask compliance (DC1, DC2, DC3, and DC4) Worldwide pulse dialling ; Blacklisting System side powered DAA operates under poor line current supply conditions Minimum Time Before Failure: hours at 25 C. CE Approval ( EN55022 EN55024 Security IEC60950) NCC is manufactured by Ingenico s telecommunication business Unit. This unit designs and manufactures complete end-to-end data communication solutions for industrial markets. Ingenico s telecom business unit offers a wide range of products, which includes communication gateways and communication adapter boards. Our family of embedded solutions allows OEMs to rapidly integrate a variety of communication functions as IP connectivity into any product platform. Ingenico invests in leading-edge technologies and leverages its experience in point of sale communications to offer easy to implement, cost effective and reliable telecommunication solutions. At the same time this addresses the connectivity and security requirements for dial up and wireless remote access.